AthalonTM Return Line Filters Athalon™ maximum-life filters deliver the highest level of sustained fluid • K eeps fluids the cleanest, longest, system protection, across all applications, regardless of severity. for the greatest value Featuring an industry leading BetaX(C)=2000* filter efficiency; the • P rovides consistent, reliable, highest rated filter performance available today. protection of system components (* per ISO 16889) over the full service life of the filter element Notes and Specifications Filter Housing • R apidly achieves and sustains required fluid system cleanliness • Flows to 265 L/min (70 US gpm) • D elivers maximum filter capacity in • Pressures to 41 Bar (600 psi) the smallest footprint • Port Size 1” and 1¼” • P revents electrostatic discharge • Rated Fatigue Pressure: from damaging your filter and 41 bar (600 psi) per NFPA T2.06.01R2-2001 CAT C/90/*(1 million degrading your fluid cycles), verified by testing at 0-48 bar (687 psi) for 1 million cycles. Contact Pall for applications with higher pressures at lower cycles Features • Filter Element Burst Pressure: • Patented Ultipleat (laid-over pleat) 10 bard (150 psid) filter medium pack • Fluid Compatibility: • Pall Stress-Resistant Technology Compatible with all petroleum oils and most water glycols, water-oil (SRT) Media emulsions, and synthetic hydraulic and lubrication fluids • Coreless filter element • Temperature Range: configuration Fluorocarbon Seals: • Low clean differential pressure for -29 ˚C to 120 ˚C (-20 ˚F to 248 ˚F) low energy operation 60 ˚C (140 ˚F) maximum in HWCF or water glycol fluids • Bypass Valve Setting: 4.5 bard (65 psid) or 1.7 bard (25 psid) UR210 Series filter housing • Indicator Pressure Setting: 3.5 bard (50 psid) or 1.1 bard (16 psid) • Materials of Construction: Head, cover and bowl: Aluminium Element Pressure Drop • Filter Element : 210 Series Filter Elements – bard/1000 L/min (psid/US gpm) Inorganic fibers impregnated and bonded with epoxy resins. Length Code AZ AP AN AS AT Polymer endcaps. Anti-static media design 08 9.93 (0.545) 4.21 (0.231) 2.83 (0.155) 1.76 (0.096) 1.33 (0.073) 13 5.95 (0.327) 2.52 (0.139) 1.70 (0.093) 1.05 (0.058) 0.80 (0.044) Pressure Drop Information 20 3.95 (0.217) 1.68 (0.092) 1.13 (0.062) 0.70 (0.038) 0.53 (0.029) Housing pressure drop using fluid with 0.9 S.G. 270285 gravity. Housing pressure drop is directly proportional to specific Multiply actual flow rate times factor in table below to determine pressure drop with fluid at 32 cSt (150 SUS), 0.9 S.G. Correct for Flow (L/min) other fluids by multiplying new viscosity in cSt/32 (SUS/150) x new S.G./0.9. Note: factors are per 1000 L/min and per 1 US gpm 0 50 100 150 200 250 1.25 Sample ∆P calculation 15 1.0 UR210 Series 13” length housing with C20 BSPP ports using AN grade media. Operating conditions 120 L/min flow rate using a hydraulic fluid of 50 cSt and specific gravity (s.g.) 1.2. 0.75 10 Total Filter ∆P -16 Port = ∆P housing + ∆P element 0.5 = (0.18 x 1.2/0.9) bard (housing) -20 Port + ((120 x 1.7/1000) x 50/32 x 1.2/0.9) bard (element) 5 = 0.24 (housing) + 0.43 bard (element) 0.25 P (bard) P (psid)
= 0.67 bard (9.7 psid)
0 0 0 20 40 60 80
Flow (US gpm)
70 Ordering Information For new installations, select one complete part number from each section below
Table A Table 4 Note: Z indicates fluorocarbon seals are standard. Table 5 Table 3 Other options are available; contact Pall. Note: Pall Athalon filter housings are supplied without filter elements or warning devices fitted. Never operate the filter unless a filter element is Table 5: Filter Element Options fitted and all warning device ports are sealed. Code ßx(c) ≥2000 based on ISO 16889 CST Rating* * CST: Cyclic Note: Z indicates fluorocarbon seals are standard. Other options are available; Stabilization Test AZ 3 07/04/01 to determine filter contact Pall. Housing P/N designates indicator port fitted with a plastic shipping plug. AP 5 11/08/03 rating under stress conditions, based AN 7 13/09/04 on SAE ARP4205 Table A AS 12 15/11/06 Port & Length Options Tables 1, 2 and 3 AT 25 16/14/08
A1608Z A1613Z A2008Z Section 3 (At least one Differential Pressure Indicator or ‘B’ type blanking plug must be ordered) A2013Z A2020Z Differential Pressure Indicator P/N: C1608Z RC Z Z C1613Z Table 6 Table 7 C2008Z Note: If no differential pressure indicator Note: Z indicates fluorocarbon C2013Z is selected, ‘B’ type blanking plug (P/N seals are standard. Other C2020Z HC9000A104Z) must be ordered separately options are available; and fitted to replace the plastic shipping plug. contact Pall.
Table 1: Housing Port Options Table 6: Indicator Options
Code Port Style Max. Operating Pressure Code Brass Option indicator A SAE J1926 straight thread 41 bar (600 psi) A218M Electrical switch (SPDT) with Hirschmann connector C BSP ISO 228 threads 41 bar (600 psi) A218R Electrical switch (SPDT) with Hirschmann connector with Red and Green LED indicators Table 2: Port Size Table 3: Housing Length and Seal Options A219D Visual indicator Code Port Style Code Length and Seal Material Other options are available; contact Pall. 16 1” nominal 08Z 8” nominal length, fluorocarbon seals Table 7: Indicator Pressue Setting Option 20 1 1/4” nominal 13Z 13” nominal length, fluorocarbon seals Code Valve 20Z 20” nominal length, fluorocarbon seals 084 For ‘A’ Valve Option - Housings (1.1 bard - 16 psid) 091 For ‘G’ Valve Option - Housings (3.5 bard - 50 psid) Table 4: Bypass Valve and Service Options Other setting options are available; contact Pall. Code Bypass Valve and Service Type A 1.7 bard (25 psid) bypass valve, Head service G 4.5 bard (65 psid) bypass valve, Head service
Seal Kit P/N: SR210SKZ
Other seal material options are available; Contact Pall. Dimensional Drawings Dimensions in mm (inches)
23.88 mm 0.94 in 48.64 mm HEAD 1.92 in
INLET OUTLET 98.3 mm 3.87 in 84.07 mm 65.28 mm 3.31 in 2,57 in
90.17 mm TORQUE BOWL 3.55 in 34/27 Nm (25/20 LBFT)
08 - 349.8 (13.8 in)
13 - 484.4 mm (19.07 in) 20 - 654.6 mm (25.77 in)
BOWL
DRAIN/VENT PLUG TORQUE TO 16/15Nm (12/11 LBFT) 1/4” OD TO SAE J514 FOR A PORT G1/4” TO ISO228 84.58 mm 76.2 mm FOR C PORT 3.33 in 3.0 in
3X MOUNTING HOLES TORQUE 14/19 Nm (10/14 lbft) 50.8 mm MIN DISTANCE REQUIRED A - PORTS: 5/16”-18 UNC-2B FOR ELEMENT REMOVAL 2.0 in X . 38” DEEP MIN 25.4 mm C - PORTS: M8X1 . 25-6H 1.0 in X 9.5 mm DEEP MIN ø 0.25
25.4 mm 12.7 mm 1.0 in 0.5 in 44.45 mm 1.75 in
The equipment has been assessed in accordance
with the guidelines laid down in The European VENT PLUG Pressure Directive 97/23/EC and has been classified TORQUE TO 16/15 Nm 32.77 mm within Sound Engineering Practice S.E.P. Suitable for (12/11 LBFT) 49.15 mm 1.3 in 1/4” OD TO SAE J514 3.8 mm 1.94 in use with Group 1 and 2 fluids only. Consult Sales for FOR A PORT 0.15 in other fluid gas group suitability. G1/4” TO ISO228 60.96 mm FOR C PORT 2.4 in 184.62 mm 5.3 in
25 Harbor Park Drive Visit us on the Web at www.pall.com
