Ranger DX800 S5

SURFACE DRILLS
TECHNICAL SPECIFICATION

KEY FEATURES
Ranger DX800 is a hydraulic, self-propelled, self-contained,
crawler based surface drilling rig equipped with a cabin Hole diameter: 76 - 127 mm (3” - 5”)
(F.O.P.S. and R.O.P.S.) and rod handling system. Rock tools: 45 or 51 mm (1¾” and 2”)rods
Rock Drill 21/23kW
Typical applications for Ranger DX800 are road cutting, pipe-
Engine output: 168 kW (TIER 4F/EU Stage V)
line drilling and foundation drilling, as well as production
Flushing air: 8.1 m3/min, up to 10 bar

ENG/METRIC. © Sandvik Mining and Rock Solutions. SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries.
drilling in medium size quarries. Therefore Ranger DX800 is
most often used by construction contractors, mines and Production capacity: 1,3 Mt/year
quarries, and also included in the equipment fleet of rental
Total weight : 15 600 kg
houses as well.

1. TECHNICAL SPECIFICATION – Ranger DX800 S5 - 1 –2022-06-29

HYDRAULIC ROCK DRILL POWERPACK
Rock drill HL/HF 820 T Caterpillar C 7.1 (TIER 4F/EU Stage
Engine type
V)
Rock tools 45 and 51 mm
DEF tank AdBlue, 24 l
Operating pressure 100-200 bar
Max. tilt angles +/- 45°
Percussion rate 53/58 Hz
Number of cylinders 6
Percussion output power 21/23 kW
Engine output 168 kW / 1 800 rpm
Maximum rotation torque 1 355 Nm
Transmission type Gear box
Shank lubrication Air / oil mist
Screw compressor type Enduro 25
Flushing Air
2 pcs., with ejector and safety
Air filters
Weight 245 kg element
Fuel tank 380 l

FEED
Feed type CF 145H HYDRAULIC SYSTEM
Total length 7 700 mm 4 pcs. for dust collector and
Number of gear pumps
cooling
Rock drill travel 4 320 mm 2 pcs. for drilling, tramming,
Number of piston pumps
Max. length of starter rod 4 875 mm (16’) boom and rodhandling

ENG/METRIC. © Sandvik Mining and Rock Solutions. SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries.
12 micron abs., return 25 micron,
Hose reel Standard Filtration rate
pressure
Feed extension travel 1350 mm Cooling capacity up to +50°C ambient
Feed/pull out force 20 kN Hydraulic oil tank 200 l
Feed swing -56°/+52° (-20°/+94°) Shank lubrication device SLU 14-1
Feed tilt 125°

CONTROL SYSTEM
ROD CHANGER Hydraulic pilot control and relay
Control system type
Rod changer type RH 714 logic
Storage capacity 6+1 rods Tramming/boom/ drilling control Pilot/direct/ pilot controlled
3050, 3660, 4265 mm (10', 12', Proportional hydraulic joysticks
Rod length User interface
14') and pressure gauges
Max. hole depth 26,8 m (6x12’+1x16’) Drilling control system type Rock Pilot+
For rotation standard and flushing
Antijamming system
optional
BOOM Collaring control Stepless
Boom type DB 800H, articulated Voltage 24 VDC

Boom reach 4,8 m

Drilling coverage 17.6 m² (26.4 m²) DUST COLLECTOR
Collaring height +2.5 m/-4.5 m Dust collector type DC 810H
Horizontal holes To the right 23 m3/min at 1 000 mm vacuum
Capacity/vacuum
H2O
Filter elements/material 13 pcs/fiber
CABIN Total filter surface 10.4 m2
Cabin type Ergo Primary cyclone Standard
Certificates F.O.P.S. and R.O.P.S. Movable suction head Standard
Noise level in the cabin below 80 dB(A)
Air conditioning Standard *
CARRIER
Pressurization Standard
Track type FL 6
Seat Multiposition
Grouser plate width 310 mm
Vibration dampening Standard
Ground contact length 2 590 mm
Safety laminated, tinted, with
Windows Ground pressure 0.81 kg/cm2
wipers
Power take-off 12 VDC Ground clearance 440 mm
* Air condition system contains fluorinated greenhouse gases HFC-134 Turnable superstructure 120° / 180°
Oscillation angles +/- 10°
Tramming force 121 Kn
Max. tramming speed 3.5 km/h

2. TECHNICAL SPECIFICATION – Ranger DX800 S5 - 1 –2022-06-29

STANDARD COMPONENTS SELECTION OF OPTIONS
1 pc Rock drill HL 820 T, hydraulic Alternative seat ISRI 6000
1 pc Chain feed CF 145H with movable drill steel support Radio with CD-MP3 player
1 pc Rod handler RH 714 incl. 1 set of jaws Reversing camera
1 pc Boom DB 800 H, articulated Vacuum cleaner for cabin
1 pc Carrier track mounted, turnable superstructure Driller's Notes - MWD Data Collection for TIM3D
1 pc Power pack diesel driven, hydraulic pumps and on-board compressor Driller's Office planning software (one-year license)
with twin pressure control GPS aiming device for TIM and TIMi inclined holes
1 pc Control system Rock Pilot+ 2000RPM Engine, 9,1m^3/min compressor
1 pc Operator's cabin F.O.P.S. and R.O.P.S. with AC Spirit level angle indicator
1 pc Dust collection system DC 810 H, hydraulic, Primary separator TIM 5200 for vertical holes
9 pcs Working lights TIM 5300 for vertical holes and depth measuring
1 pc Gauge set for accumulator pressure checking TIM 6300 for inclined holes and depth measuring
1 pc Alarm signal TIM 6300 with open interface
1 Set Manuals, paper copy TIM 6500 for inclined holes, depth measuring and laser level
1 Set Manuals, USB memory TIM 6700 (TIM6500 with open interface)
1 pc Alarm beacon TIM3D drill navigation system (Leica)
Horizontal drilling kit

ENG/METRIC. © Sandvik Mining and Rock Solutions. SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries.
1 pc Hose reel with steel length 3660 mm (12'),
1 pc Service light, hand held 12V magnetic EN 16228 Safety cage for feed, long
EU-safety devices, EN16228, short safety cage Feed 5 485 mm (18’), without hose reel and horizontal drilling
Long feed 6069 mm 20', no rod changer
Kit for alternative steels, each
Thread greasing
Thread greasing with 5 gallon bucket
Power extractor
THE JAWS FOR DRILL STEELS
Readyness for Power Extractor
DRILL STEEL TYPE DRILL STEEL RECOMMENDED
DIAMETER HOLE DIAMETER HF820T rock drill (replaces standard component)
Extension rods 45 mm 1 ¾" 76 - 89 mm 3" - 3 ½" Anti- freeze system for air lines
MF-rods 45 mm 1 ¾" 76 - 89 mm 3" - 3 ½" Biogradeable hydraulic oil, not with CSL
MF-rods 51 mm 2" 89 - 127 mm 3 ½" - 5" Central lubrication system Sandvik
Extension rods 51 mm 2" 89 - 127 mm 3 ½" - 5" Electric fuel filling pump
Fast fill connection for fuel Wiggins
Guides for grousers, long
Hydraulic rear ground support
Hydraulic winch with radio remote and cable tightness automatics
Hydraulic winch with full radio drilling, tramming boom and rod
handling
Remote Screen Interface for TIMi and TIM3D
Led lights, 6 pcs
Radio remote control for rear ground support, tramming and oscillation
Full radio remote control for drilling, tramming, boom and rod handling
Three bar grouser plates
Towing hook
Turnable superstructure 180 deg.
Xenon lights, 6 pcs
Fuel powered heater for engine and cabin
Fuel powered heater for engine, cabin and water tank
Readyness for fuel powered heater
Dustmizer (engine heater option needed below freezing point)
Flushing control automatics
Sampling device
Shut down of suction for water holes
Water injection system
Grinder, Dynaset
CME mini junior Grinder
Spare radio remote transmitter
First service kit for Ranger DX800
Special tools for HL 820 T, field kit
Special tools for HL 820 T, compete
My Sandvik and SanRemo

3. TECHNICAL SPECIFICATION – Ranger DX800 S5 - 1 –2022-06-29

COVERAGE AREA AND DIMENSIONS

ENG/METRIC. © Sandvik Mining and Rock Solutions. SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries.
DIMENSIONS
Weight 15 600 kg
Width 2.45 m
Height a/b, 3.2 m/3.6 m
With safety cage 3.3 m/3.8 m
With noise silencer 3.3 m/4.0 m
Total length 11.3 m/8.4 m

Sandvik Mining and Rock Solutions reserves the right to make changes to the information on this data sheet without prior notification to users. Please contact a
Sandvik representative for clarification on specifications and options.

ROCKTECHNOLOGY.SANDVIK

4. TECHNICAL SPECIFICATION – Ranger DX800 S5 - 1 –2022-06-29