Design of Intelligent Helmet For Miners Using Internet of Things

DESIGN OF INTELLIGENT HELMET FOR
MINERS USING INTERNET OF THINGS
BY
YUVARAJ P
ABSTRACT
Mining is One of the Most Dangerous Activities in
the world. The Mining Industry has the Highest
Incidence of Occupational deaths among all. The
Safety of Miners paramount in the Mining Industry.
Usually, The miners only wear a Helmet with Light
f or Visibility. In this paper, an Intelligent System
has been developed to assist the Miners. It consists
of Various Sensors to detect and Monitor any
Hazardous Events and Transmit the data to the
Control Station to Alert the Miners. The
Transmission is done using the Zigbee Protocol and
The Monitoring is done on a Control Station.
Keywords: Intelligent Helmet, Safety, Miners,
Zigbee
CONTENTS
1.Introduction
2.Literature Review
3.Proposed Method.
4.Flowchart
5.Working
6.Hardware Used
6.1.NodeMcu
6.2 Heart Rate Sensors
6.3 Infrared Obstacle Sensors
6.4 MQ4 Methane Gas Sensors
6.5 MQ2 Gas Sensors
6.6 LM35 Temperature Sensors
6.7 Xbee
6.8 Thermal Sensors
7 Methodology
7.1 Sensing Module
7.2 Transmission Module
7.3 Monitoring Module 8 Conclusion
1 INTRODUCTION
Mining is the extraction of minerals and other geological
materials from the Earth Crust. Mining techniques can be
divided into Two Surface Mining and Underground
Mining. In Underground Mining there is a concern
about the Safety of the Workers due to its Highly
Changing Environment. Thousands of miners die from
mining accidents each year. To Address this Problem, we
have developed a prototype model - Intelligent Safety
Helmet to assure extra Safety among Mineworkers. This
Will Help to Identify any Dangerous Changes in the
Surroundings by Continuously Monitoring The Mining
Environment through the Intelligent Helmet. The Sensor
placed in the Helmet will help us to detect any Hazardous
Changes and Alert the miners through Various Alerting
Mechanism.
2. LITERATURE REVIEW
Yongping Wu and Guo Feng proposed a Miners Safety System
using the Bluetooth Wireless Transmission System. The Main
Disadvantage of this System is that Bluetooth is a short Range
and Unreliable Transmission. Due to this the Connection
between the Control Room and Miners is not Stable and may
cause loss of Connection and thus the Whole system may not
work.
Hem Chandra Joshi and Satyajit Das Proposed a system That
uses Zig-bee technology and Other Sensors But It Doesn't
Implement a Heart Rate Sensor that will be used to monitor the
Heart Rate in Realtime. Thus it is not a viable solution to the
problem of the Miners.
3. PROPOSED METHOD
It Consist of an Intelligent Helmet with a Sensing Module
containing Sensors Such as a Temperature Sensor,
Methane Gas Sensor, Smoke Sensor, IR Sensor To
Monitor the Surrounding Condition And Heart Rate
Sensor to Monitor the Person Health Condition. To
Transmit Data to the Monitoring Station Zigbee Wireless
Protocol is used. These Collected Data is Transmitted
and Monitored in Realtime to detect any Hazardous
Condition in the Mining Environment. If any Hazardous
Event is Detected The Ground Station and the Miners
Will be Alerted by Using Buzzer and Other Emergency
Protocols. This Zigbee Mesh Network Will Guarantee the
Transmission of Data from Miners to the Control Station.
4.Flowchart
Cloud
Panic Buttons
Temperature
Sensors
NodeMCU
IR Sensors ZigBee
(ESP8266) Module
MQ2 Smoke
sensors
MQ4 Methane
Sensors Buffer ZigBee
Heart Rate Module
Sensors
Thermal
Sensors
Output
Window
5.WORKING
The Intelligent Helmet is integrated with a variety of Sensor
including Temperature Sensor, IR Sensor, Smoke Sensor,
Methane Gas Sensor and Heart Rate Sensor. The Oxygen Sensor
measures the level of Oxygen in the Underground Mining
Environment. The Temperature Sensor Measures the Real Time
Temperature of the surroundings. The IR sensor used to detect
whether the miner is wearing a helmet or not. MQ2 smoke
sensor detects the concentration of gases such as H2, LPG, CH4,
CO, Alcohol, Smoke or Propane. MQ4 Methane Gas Sensor
detects the Methane Concentration in the Underground Mines. A
heart rate sensor is used to monitor the heart rate of miners and
any drastic changes in the Heart Rate can be determined. A
Panic button is placed in the helmet to trigger the Emergency
Alert. whenever any hazardous events happen in the
underground area buzzer will be activated. Zigbee protocol is
used to transmit the data from the sensor to the Receiving
Station and the transmitted data is sent to the cloud.
6.HARDWARE USED
6.1.NodeMcu
6.2 Heart Rate Sensors
6.3 Infrared Obstacle Sensors
6.4 MQ4 Methane Gas Sensors
6.5 MQ2 Gas Sensors
6.6 LM35 Temperature Sensors
6.7 Xbee
6.8 Thermal Sensors
6.1 NodeMcu
• NodeMCU is a low-cost open source IoT platform. It
initially included firmware which runs on the ESP8266 Wi-
Fi SoC from Espressif Systems, and hardware which was
based on the ESP-12 module. Later, support for
the ESP32 32-bit MCU was added.
• The firmware uses the Lua scripting language. The
firmware is based on the eLua project, and built on the
Espress if Non-OS SDK for ESP8266. It uses many open
source projects, such as lua-cjson[9] and SPIFFS.[10] Due to
resource constraints, users need to select the modules
relevant for their project and build a firmware tailored to
their needs. Support for the 32-bit ESP32 has also been
implemented.
6.2 HEART RATE SENSORS
• Heart Rate Sensor is used to measure the Heart Pulse Rate.
It essentially combines a simple optical heart rate sensor
with amplification and noise cancellation circuitry making
it fast and easy to get reliable pulse readings. Here we can
able to get the Real-Time Heart Rate of the Miners.
6.3 INFRARED OBSTACLE SENSORS

Infrared obstacle Sensor is used to detect whether the miner
is wearing a helmet or not. The IR sensor consists of a
transmitter infrared LED and an infrared receiver. An
infrared Transmitter is a light-emitting diode that emits
infrared radiations. IR Receiver will sense and detect
whether the Miner is wearing a Helmet or not.
6.4 MQ4 METHANE GAS SENSOR

MQ4 Methane Gas Sensor detects the concentration of
methane gas in the air and outputs its reading as an analogue
voltage. The concentration sensing range of 300 ppm to 10,000
ppm is suitable for leak detection. This sensor can detect if the
Methane is Leaked in the Underground Mines
6.5 MQ2 GAS SENSOR
MQ2 Gas Sensor is an electronic sensor used for sensing the
concentration of gases in the air such as LPG, propane, methane,
hydrogen, alcohol, smoke and carbon monoxide. MQ2 gas
sensor is also known as chemiresistor. It contains a sensing
material whose resistance changes when it comes in contact with
the gas.
6.6 LM35 TEMPERATURE SENSORS

• LM 35 Temperature Sensor is a precision integrated-circuit
temperature device Whose output voltage linearly-
proportional to the Centigrade temperature. Here it
measures the Temperature of the Surrounding
Environment.
6.7 XBee
XBee is a Wireless Radio Frequency Module based on Zigbee
Protocol for data transmission. It has Mesh Network
Functionality which can be utilized for long-distance
communication with the help of Intermediate Nodes.
6.8 THERMAL SENSORS
Thermal sensors measure the relative surface temperature of
objects.When long wave infrared radiation emitted from objects
strikes the thermal sensor, it heats up the microbolometer and
this changes the electrical resistance. These changes are
converted to electrical signals and stored as raw data or
processed into thermal imagery. For cases in which a visual
component (video or images) is needed, the sensor has a thermal
imaging (or infrared) camera. These cameras form an image
using infrared radiation and differentiate apparent temperature
variations using different color palettes.
Thermal images show differences in total radiant energy

allowing for temperature calculations. To determine true
temperature, you’ll need to use a calibrated radiometric sensor,”
shared Scott Hatcher, a Geospatial Scientist.
7 METHODOLOGY
The System Will Consist Of Three Main Modules
• Sensing Module
• Transmission Module
• Monitoring Module
7.1 SENSING MODULE

• The Sensing Module will contain a variety of Sensors
Including a Temperature Sensor, Smoke Sensor, Heart Rate
Sensor and IR Obstacle Sensor. Also, there is a Panic
Switch That will Alert the Monitoring Station in case of
Any Emergency.
7.2 TRANSMISSION MODULE
The Collected data from the Sensing Module will be
Transmitted Using an IEEE 802.15.4 based high-level
communication protocols called Zigbee. To improve the
Connectivity Zigbee uses multi-hop mesh networking to
eliminate single points of failure and expand the reach of
networks.
7.3 MONITORING MODULE

• The Transmitted Data is received by a Zigbee Receiver in
the Monitoring End of the System. The Received Data will
be processed and in case of any Emergency, The System
will follow an Emergency Rescue Protocol that will Alert
the Miners. Thus this will Save the Lives of Miners who
are Continuously working in a Dangerous Environment.
8.CONCLUSION
IoT Based Intelligent Helmet for Miner Project’s Simulation
is Done using Proteus Software. This Solves the Problem of
Alerting the Miners in Case of Any Emergency Conditions.
The Sensors in the Miners Helmet Monitors all the
Information in Realtime and In case of any Value Crosses
the Threshold Value the Buzzer is Activated and the
Emergency Rescue Protocol is followed. We can see that
the Alarm is triggered Instantly and thus miners' lives can
be saved through this.

Design of Intelligent Helmet For Miners Using Internet of Things

Uploaded by

Copyright:

Available Formats

Design of Intelligent Helmet For Miners Using Internet of Things

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Design of Intelligent Helmet For Miners Using Internet of Things

Uploaded by

Copyright:

Available Formats

DESIGN OF INTELLIGENT HELMET FOR

MINERS USING INTERNET OF THINGS

6.3 INFRARED OBSTACLE SENSORS

6.4 MQ4 METHANE GAS SENSOR

6.6 LM35 TEMPERATURE SENSORS

Thermal images show differences in total radiant energy

7.1 SENSING MODULE

7.3 MONITORING MODULE

You might also like