LSA 46.

Low Voltage Alternator - 4 pole

230 to 365 kVA - 50 Hz / 288 to 456 kVA - 60 Hz
Electrical and mechanical data
LSA 46.3 - 230 to 365 kVA - 50 Hz / 288 to 456 kVA - 60 Hz

The best of performance

Nidec Leroy-Somer LSA 46.3 alternator has been designed to offer you the best power generation performances. With its
meticulous design and optimized architecture, the LSA 46.3 strikes the perfect balance between compactness, reliability,
performance and longevity.
Whatever your application, the LSA 46.3 will meet your needs and will adapt to all situations.

Standards
Nidec Leroy-Somer LSA 46.3 alternator meets all key international standards and regulations, including IEC 60034,
NEMA MG 1.32-33, ISO 8528-3, CSA C22.2 n°100-14 and UL 1446 (UL 1004 on request). Also compliant with IEC 61000-6-2,
IEC 61000-6-3, IEC 61000-6-4, VDE 0875G, VDE 0875N and EN 55011, group 1 class A for European zone.
Nidec Leroy-Somer LSA 46.3 alternator can be integrated in EC marked generator set, and bears EC and CMIM markings.
It is designed, manufactured and marketed in an ISO 9001 and ISO 14001 quality assurance environment.

Electrical characteristics and performances

● Class H insulation
● 2/3 pitch winding, standard 12-wire (6) reconnectable
● Voltage range:
- 50 Hz: 220V - 240V and 380V - 415V (440V)
- 60 Hz: 208V - 240V and 380V - 480V
● High efficiency and motor starting capacity
● Other voltages are possible with optional adapted windings:
- 50 Hz: 440V (no. 7), 500V (no. 9), 550V (no. 22), 600V (no. 23), 690V (no. 10 or 52)
- 60 Hz: 380V and 416V (no. 8), 600V (no. 9), 690V (no. 22)

Excitation and regulation system

Excitation system Regulation options
C.T.
AVR SHUNT AREP PMG Mains Remote voltage
Current transformer
(option) (option) paralleling potentiometer
for paralleling
R250 Standard √
D350 Option Standard Standard √* √
D550 Option Option Option √* √ √
*: only with AREP or PMG
3-phase sensing is included as a standard with digital regulators.

Protection system and options

● The LSA 46.3 is IP 23
● Complete winding protection for clean environments with relative humidity ≤ 95 %, including indoor marine environments
● Options:
- Filters on air inlet: derating 5%
- Filters on air inlet and air outlet (IP 44): derating 10%
- Reinforced winding protection for harsh environments and relative humidity greater than 95%
- Space heater
- Thermal protection for stator windings and shields

Mechanical construction
● Compact and rigid assembly to better withstand generator vibrations
● Steel frame
● Cast iron flanges and shields
● Two-bearing and single-bearing versions designed to be suitable for engines on the market
● Half-key balancing
● Greased for life bearings, regreasable bearings (optional)
● Direction of rotation: clockwise and anti-clockwise (without derating)

Terminal box design

● Easy access to the voltage regulator and to the connections
● Possible inclusion of accessories for paralleling, protection and measurement
● 9-way terminal block for voltage reconnection

2 Electric Power Generation

LSA 46.3 - 230 to 365 kVA - 50 Hz / 288 to 456 kVA - 60 Hz

General characteristics
Insulation class H Excitation system SHUNT AREP / PMG
Winding pitch 2/3 (wind. 6) AVR type R250 D350
Number of wires 12 Voltage regulation (*) ± 0.5% ± 0.25%
Protection IP 23 Short-circuit current - 300% (3 IN) : 10s
Altitude ≤ 1000 m Total Harmonic Distortion THD (**) no load < 2.5% - on load < 2.5%
Overspeed 2250 R.P.M. Waveform: NEMA = TIF (**) < 50
Air flow 0.48 m3/s (50 Hz) / 0.58 m3/s (60 Hz) Waveform: I.E.C. = THF (**) < 2%
(*) Steady state (**) Total harmonic distortion between phases, no-load or on-load (non-distorting)

Ratings 50 Hz - 1500 R.P.M.

kVA / kW - P.F. = 0.8
Duty/T°C Continuous duty/40°C Continuous duty/40°C Stand-by/40°C Stand-by/27°C
Class/T°K H/125°K F/105°K H/150°K H/163°K
Phase 3 ph. 1 ph. 3 ph. 1 ph. 3 ph. 1 ph. 3 ph. 1 ph.
Y 380V 400V 415V 440V ∆∆ 380V 400V 415V 440V ∆∆ 380V 400V 415V 440V ∆∆ 380V 400V 415V 440V ∆∆
∆ 220V 230V 240V 230V 220V 230V 240V 230V 220V 230V 240V 230V 220V 230V 240V 230V
YY 200V 220V 200V 220V 200V 220V 200V 220V
LSA 46.3 S4 kVA 230 230 230 219 138 209 209 209 200 126 244 244 244 232 146 253 253 253 240 152
kW 184 184 184 175 110 167 167 167 160 101 195 195 195 186 117 202 202 202 192 122
LSA 46.3 S5 kVA 240 250 250 238 150 218 228 228 216 137 254 265 265 252 159 264 275 275 261 165
kW 192 200 200 190 120 174 182 182 173 110 204 212 212 202 127 211 220 220 209 132
LSA 46.3 M7 kVA 275 275 275 261 165 250 250 250 238 150 292 292 292 277 175 303 303 303 287 182
kW 220 220 220 209 132 200 200 200 190 120 234 234 234 222 140 242 242 242 230 146
LSA 46.3 M8 kVA 290 300 300 285 180 264 273 273 259 164 307 318 318 302 191 319 330 330 313 200
kW 232 240 240 228 144 211 218 218 207 131 246 254 254 242 153 255 264 264 250 160
LSA 46.3 L10 kVA 325 325 325 309 195 300 300 300 281 177 345 345 345 327 207 358 358 358 340 215
kW 260 260 260 247 156 240 240 240 225 142 276 276 276 262 166 286 286 286 272 172
LSA 46.3 L11 kVA 350 365 365 347 210 319 332 332 316 191 371 387 387 368 225 385 400 400 380 231
kW 280 292 292 277 168 255 266 266 253 153 297 310 310 294 180 308 320 320 304 185

Ratings 60 Hz - 1800 R.P.M.

kVA / kW - P.F. = 0.8
Duty/T°C Continuous duty/40°C Continuous duty/40°C Stand-by/40°C Stand-by/27°C
Class/T°K H/125°K F/105°K H/150°K H/163°K
Phase 3 ph. 1 ph. 3 ph. 1 ph. 3 ph. 1 ph. 3 ph. 1 ph.
Y 380V 416V 440V 480V ∆∆ 380V 416V 440V 480V ∆∆ 380V 416V 440V 480V ∆∆ 380V 416V 440V 480V ∆∆
∆ 220V 240V 240V 220V 240V 240V 220V 240V 240V 220V 240V 240V
YY 208V 220V 240V 208V 220V 240V 208V 220V 240V 208V 220V 240V
LSA 46.3 S4 kVA 226 250 262 288 152 206 227 238 262 138 240 264 278 305 161 250 274 288 316 167
kW 181 200 210 230 122 165 182 190 210 110 192 211 222 244 129 200 219 230 253 134
LSA 46.3 S5 kVA 245 265 280 313 165 223 241 255 284 150 260 281 297 331 175 270 292 308 344 182
kW 196 212 224 250 132 178 193 204 227 120 208 225 238 265 140 216 234 246 275 146
LSA 46.3 M7 kVA 275 300 315 344 182 250 273 287 313 165 292 318 334 364 192 303 330 347 378 200
kW 220 240 252 275 146 200 218 230 250 132 234 254 267 291 154 242 264 278 302 160
LSA 46.3 M8 kVA 290 315 340 375 200 264 287 309 337 180 307 334 360 395 210 319 347 375 412 218
kW 232 252 272 300 160 211 230 247 270 144 246 267 288 316 168 255 278 300 330 174
LSA 46.3 L10 kVA 315 345 365 406 215 287 314 332 370 195 334 366 387 431 227 347 380 402 447 236
kW 252 276 292 325 172 230 251 266 296 156 267 293 310 345 182 278 304 322 358 189
LSA 46.3 L11 kVA 360 393 419 456 231 328 358 381 415 210 382 417 444 483 250 396 432 461 502 254
kW 288 314 335 365 185 262 286 305 332 168 305 333 355 386 200 317 346 369 402 203

Electric Power Generation 3

LSA 46.3 - 230 to 365 kVA - 50 Hz / 288 to 456 kVA - 60 Hz

Efficiencies 400V - 50 Hz (— P.F.: 0.8) (--- P.F.: 1)

% LSA 46.3 S4 % LSA 46.3 M8

100 100

94.8 95.2 95.1 94.9 95.1 95.4 95.3 95.1

95 95
92.2 92.6
93.5 93.5 93.7 93.7
92.9 92.6 93.1 92.8
90 91.3 91.7
90

85 kVA 85 kVA
0 50 100 150 200 250 300 0 50 100 150 200 250 300 350

% LSA 46.3 S5 % LSA 46.3 L10

100 100

95.4 95.9 95.8 95.7

95.0 95.2 95.0 94.8
95 95
92.7 92.8
94.3 94.4 94.1
93.6 93.4 93.8
92.7 92.3 92.1
91.8
90 90

85 kVA 85 kVA
0 50 100 150 200 250 300 0 100 200 300 400

% LSA 46.3 M7 % LSA 46.3 L11

100 100

95.4 95.4 95.3 95.6 95.9 95.7 95.6

94.9
95 95
93.4
92.1 93.8 94.4 94.3
93.6 93.8 93.5
93.3 93.1 92.7
90 91.3 90

85 kVA 85 kVA
0 50 100 150 200 250 300 350 0 100 200 300 400 500

Reactances (%). Time constants (ms) - Class H / 400 V

S4 S5 M7 M8 L10 L11
Kcc Short-circuit ratio 0.4 0.36 0.49 0.44 0.44 0.39
Xd Direct-axis synchronous reactance unsaturated 339 369 316 344 316 355
Xq Quadrature-axis synchronous reactance unsaturated 173 188 161 175 161 181
T’do No-load transient time constant 2452 2452 2543 2543 2686 2686
X’d Direct-axis transient reactance saturated 13.8 15 12.4 13.5 11.7 13.2
T’d Short-circuit transient time constant 100 100 100 100 100 100
X”d Direct-axis subtransient reactance saturated 11 12 9.9 10.8 9.4 10.5
T”d Subtransient time constant 10 10 10 10 10 10
X”q Quadrature-axis subtransient reactance saturated 14.6 15.9 13.1 14.3 12.6 14.1
Xo Zero sequence reactance 0.57 0.62 0.51 0.56 0.49 0.55
X2 Negative sequence reactance saturated 12.86 13.98 11.57 12.62 11.01 12.37
Ta Armature time constant 15 15 15 15 15 15
Other class H / 400 V data
io (A) No-load excitation current (SHUNT/AREP) 0.78 0.78 0.94 0.94 0.81 0.81
ic (A) On-load excitation current (SHUNT/AREP) 3.06 3.32 3.14 3.41 2.94 3.29
uc (V) On-load excitation voltage (SHUNT/AREP) 41.4 44.6 46.2 49.7 42.8 47.5
ms Response time (∆U = 20% transient) 500 500 500 500 500 500
kVA Start (∆U = 20% cont. or 30% trans.) SHUNT 554 557 667 664 791 790
kVA Start (∆U = 20% cont. or 30% trans.) AREP 639 640 736 738 876 880
% Transient ∆U (on-load 4/4) SHUNT - P.F.: 0.8LAG 13.2 14 13.6 14.4 13.6 14.7
% Transient ∆U (on-load 4/4) AREP - P.F.: 0.8LAG 12.4 13.1 12.7 13.5 12.6 13.7
W No-load losses 3660 3660 4449 4449 4775 4775
W Heat dissipation 13869 15662 15583 17615 16271 19169

4 Electric Power Generation

 LSA 46.3 - 230 to 365 kVA - 50 Hz / 288 to 456 kVA - 60 Hz

Transient voltage variation 400V - 50 Hz

S4-S5 M7-M8 L10-L11 S4-S5 M7-M8 L10-L11

30% 30%

25% 25%

20% 20%
Voltage drop

Voltage drop
15% 15%

10% 10%

5% 5%

0% 0%
0 100 200 300 400 500 600 700 800 900 0 200 400 600 800 1000

Phase loading (SHUNT) - kVA at P.F. = 0.8 Phase loading (AREP/PMG) - kVA at P.F. = 0.8

S4-S5 M7-M8 L10-L11 S4-S5 M7-M8 L10-L11

30% 30%

25% 25%

20% 20%
Voltage rise

Voltage rise

15% 15%

10% 10%

5% 5%

0% 0%
0 200 400 600 800 0 200 400 600 800

Load shedding (SHUNT) - kVA at P.F. = 0.8 Load shedding (AREP/PMG) - kVA at P.F. = 0.8

S4-S5 M7-M8 L10-L11 S4-S5 M7-M8 L10-L11

30% 30%

25% 25%

20% 20%
Voltage drop

Voltage drop

15% 15%

10% 10%

5% 5%

0% 0%
0 100 200 300 400 500 600 700 800 0 100 200 300 400 500 600 700 800 900

Motor starting (SHUNT) Motor starting (AREP/PMG)

Locked rotor kVA at P.F. = 0.6 Locked rotor kVA at P.F. = 0.6

1) For a starting P.F. other than 0.6, the starting kVA must be multiplied by K = Sine P.F. / 0.8
2) For voltages other than 400V (Y), 230V (Δ) at 50 Hz, then kVA must be multiplied by (400/U)2 or (230/U)2.

Electric Power Generation 5

LSA 46.3 - 230 to 365 kVA - 50 Hz / 288 to 456 kVA - 60 Hz

Efficiencies 480V - 60 Hz (— P.F.: 0.8) (--- P.F.: 1)

% LSA 46.3 S4 % LSA 46.3 M8

100 100

95.0 95.0 94.9 95.3 95.3 95.2

94.3 94.6
95 95

93.5 91.6 93.5 93.7

91.0 93.1 93.1 92.9 93.3 93.1
90 90 90.9
90.3

85 kVA 85 kVA
0 50 100 150 200 250 300 350 0 100 200 300 400 500

% LSA 46.3 S5 % LSA 46.3 L10

100 100

95.6 95.7 95.7

95.0 95.0 94.8 94.9
95 94.5 95
91.8 94.0 94.4 94.2 94.0
91.5 93.3 93.4 92.9 92.7
90 90.8 90 91.2

85 kVA 85 kVA
0 100 200 300 400 0 100 200 300 400 500

% LSA 46.3 M7 % LSA 46.3 L11

100 100

95.2 95.3 95.3 95.2 95.7 95.7 95.6

95 94.4 95
92.5 94.3
93.7 94.2 94.0 93.8
91.0 93.3 93.5 93.3
91.8
90 90
90.3

85 kVA 85 kVA
0 100 200 300 400 0 100 200 300 400 500 600

Reactances (%). Time constants (ms) - Class H / 480 V

S4 S5 M7 M8 L10 L11
Kcc Short-circuit ratio 0.38 0.35 0.47 0.43 0.42 0.37
Xd Direct-axis synchronous reactance unsaturated 354 385 329 359 329 370
Xq Quadrature-axis synchronous reactance unsaturated 180 196 168 183 168 188
T’do No-load transient time constant 2452 2452 2543 2543 2686 2686
X’d Direct-axis transient reactance saturated 14.4 15.7 12.9 14.1 12.2 13.7
T’d Short-circuit transient time constant 100 100 100 100 100 100
X”d Direct-axis subtransient reactance saturated 11.5 12.5 10.3 11.2 9.8 11
T”d Subtransient time constant 10 10 10 10 10 10
X”q Quadrature-axis subtransient reactance saturated 15.2 16.6 13.7 14.9 13.1 14.1
Xo Zero sequence reactance 0.6 0.65 0.53 0.58 0.51 0.57
X2 Negative sequence reactance saturated 13.42 14.58 12.06 13.14 11.46 12.87
Ta Armature time constant 15 15 15 15 15 15
Other class H / 480 V data
io (A) No-load excitation current (SHUNT/AREP) 0.78 0.78 0.94 0.94 0.81 0.81
ic (A) On-load excitation current (SHUNT/AREP) 3.05 3.3 3.13 3.38 2.92 3.26
uc (V) On-load excitation voltage (SHUNT/AREP) 41.7 44.9 46.5 50 43.1 47.7
ms Response time (∆U = 20% transient) 500 500 500 500 500 500
kVA Start (∆U = 20% cont. or 30% trans.) SHUNT 699 695 799 800 947 945
kVA Start (∆U = 20% cont. or 30% trans.) AREP 765 766 887 883 1055 1053
% Transient ∆U (on-load 4/4) SHUNT - P.F.: 0.8LAG 13.6 14.4 14 14.9 13.9 15.1
% Transient ∆U (on-load 4/4) AREP - P.F.: 0.8LAG 12.8 13.5 13.1 13.8 13 14
W No-load losses 5549 5549 6617 6617 7115 7115
W Heat dissipation 16897 18905 18951 21212 19891 23158

6 Electric Power Generation

 LSA 46.3 - 230 to 365 kVA - 50 Hz / 288 to 456 kVA - 60 Hz

Transient voltage variation 480V - 60 Hz

S4-S5 M7-M8 L10-L11 S4-S5 M7-M8 L10-L11

30% 30%

25% 25%
Chute de tension

Chute de tension
20% 20%

15% 15%

10% 10%

5% 5%

0% 0%
0 200 400 600 800 1000 1200 0 200 400 600 800 1000 1200

Mise en charge (SHUNT) - kVA à Cos φ 0.8 Mise en charge (AREP/PMG) - kVA à Cos φ 0.8

S4-S5 M7-M8 L10-L11 S4-S5 M7-M8 L10-L11

30% 30%

25% 25%
Montée de tension

Montée de tension

20% 20%

15% 15%

10% 10%

5% 5%

0% 0%
0 200 400 600 800 1000 0 200 400 600 800 1000

Délestage (SHUNT) - kVA à Cos φ 0.8 Délestage (AREP/PMG) - kVA à Cos φ 0.8

S4-S5 M7-M8 L10-L11 S4-S5 M7-M8 L10-L11

30% 30%

25% 25%
Chute de tension

Chute de tension

20% 20%

15% 15%

10% 10%

5% 5%

0% 0%
0 200 400 600 800 1000 0 200 400 600 800 1000 1200

Démarrage des moteurs (SHUNT) Démarrage des moteurs (AREP/PMG)

kVA rotor bloqué à Cos φ 0.6 kVA rotor bloqué à Cos φ 0.6

1) For a starting P.F. other than 0.6, the starting kVA must be multiplied by K = Sine P.F. / 0.8
2) For voltages other than 480V (Y), 277V (Δ), 240V (YY) at 60 Hz, then kVA must be multiplied by (480/U)2 or (277/U)2 or (240/U)2.

Electric Power Generation 7

LSA 46.3 - 230 to 365 kVA - 50 Hz / 288 to 456 kVA - 60 Hz

3-phase short-circuit curves at no load and rated speed (star connection Y)

10000

LSA 46.3 S4
1000
AREP
Symmetrical -------- In
Asymmetrical - - -
100
Current (A)

SHUNT
10

1
1 10 100 1000 10000

Time (ms)

10000

LSA 46.3 S5
1000 AREP
Symmetrical -------- In
Asymmetrical - - -
100
Current (A)

SHUNT
10

1
1 10 100 1000 10000

Time (ms)

10000

LSA 46.3 M7 1000 AREP

In
Symmetrical --------
Asymmetrical - - -
100
Current (A)

SHUNT
10

1
1 10 100 1000 10000

Time (ms)

Influence due to connection

Curves shown are for star (Y) connection.
For other connections, use the following multiplication factors:
- Series delta : current value x 1.732 - Parallel star : current value x 2

8 Electric Power Generation

LSA 46.3 - 230 to 365 kVA - 50 Hz / 288 to 456 kVA - 60 Hz

3-phase short-circuit curves at no load and rated speed (star connection Y)

10000

LSA 46.3 M8 1000 AREP

Symmetrical -------- In
Asymmetrical - - -
100
Current (A)

SHUNT
10

1
1 10 100 1000 10000

Time (ms)

10000

LSA 46.3 L10 AREP

1000
In
Symmetrical --------
Asymmetrical - - -
100
Current (A)

SHUNT

10

1
1 10 100 1000 10000

Time (ms)

10000

LSA 46.3 L11 1000 AREP

In
Symmetrical --------
Asymmetrical - - -
100
Current (A)

SHUNT
10

1
1 10 100 1000 10000

Time (ms)

Influence due to short-circuit 3-phase 2-phase L/L 1-phase L/N

Curves are based on a three-phase
Instantaneous (max.) 1 0.87 1.3
short-circuit.
For other types of short-circuit, Continuous 1 1.5 2.2
use the following multiplication factors. Maximum duration (AREP/PMG) 10 sec. 5 sec. 2 sec.

Electric Power Generation 9

LSA 46.3 - 230 to 365 kVA - 50 Hz / 288 to 456 kVA - 60 Hz

Single-bearing dimensions
L
Access to terminals
LB 568
Optional cable
AH Xg 506 40 ß output
198 94.3 Access to regulator
CF Standard cable
output

485.5
PMG optional
Ø N - 0.127
- 0.05
Ø BX - 0.15

765.5
Ø 235
0
ØP

XBG holes Ø S

280 - 2
0
equid. on Ø M Ø 206

12
68 80 21
AIR OUTLET AIR INLET 457
6 170 527
Access to
6 C rotating diodes X holes Ø Y equid. on Ø U

Dimensions (mm) and weight Coupling

Type L without PMG LB Xg C Weight (kg) Flex plate 11 ½ 14 18
maxi*
LSA 46.3 S4 944 892 423 429 674 Flange S.A.E 3 X
LSA 46.3 S5 944 892 423 429 682 Flange S.A.E 2 X
LSA 46.3 M7 989 937 445 429 754 Flange S.A.E 1 X X
LSA 46.3 M8 989 937 445 429 754 Flange S.A.E ½ X
LSA 46.3 L10** 1084 1032 493 525 888 Flange S.A.E 0 X X
LSA 46.3 L11** 1084 1032 493 525 888
* L maxi = LB + AH maxi + 12.4 (only for SAE 11 ½) ** Shaft height = 355 mm optional
Flange (mm) Flex plate (mm)
S.A.E. P N M XBG S β° CF S.A.E. BX U X Y AH
3 600*/641 409.575 428.625 12 11 15° 10 11 ½ 352.42 333.38 8 11 39.6
2 600*/641 447.675 466.725 12 11 15° 10 14 466.72 438.15 8 14 25.4
1 600*/641 511.175 530.225 12 12 15° 10 18* 571.5 542.92 6 17 15.7
½ 713 584.2 619.125 12 14 15° 6 * Option
0 713 647.7 679.45 16 14 11° 15’ 19
* Specific dimension LSA 46.3 S4

Torsional analysis data

Xr
Ø 114.8
Ø 100

Ø 120
Ø 110

Ø 115

Ø 115
Ø 110
Ø 75

Ø 88
Ø 75

Lr

Centre of gravity: Xr (mm), Rotor length: Lr (mm), Weight: M (kg), Moment of inertia: J (kgm2): (4J = MD2)
Flex plate S.A.E. 11 ½ S.A.E. 14
Type Xr Lr M J Xr Lr M J
LSA 46.3 S4 431 928 277 2.93 416 928 277 3.09
LSA 46.3 S5 431 928 277 2.93 416 928 277 3.09
LSA 46.3 M7 459 973 307 3.23 444 973 307 3.39
LSA 46.3 M8 459 973 307 3.32 444 973 307 3.39
LSA 46.3 L10 507 1068 362 3.96 493 1068 362 4.12
LSA 46.3 L11 507 1068 362 3.96 493 1068 362 4.12

NOTE : Dimensions are for information only and may be subject to modifications. Contractual 2D drawings can be downloaded from the Leroy-
Somer site, 3D drawing files are available upon request.
The torsional analysis of the transmission is imperative. All values are available upon request.

10 Electric Power Generation

LSA 46.3 - 230 to 365 kVA - 50 Hz / 288 to 456 kVA - 60 Hz

Two-bearing dimensions
L
Access to terminals
105 LB 568
Optional cable
Xg 506 40 15° output
198 94.3 Access to regulator
Standard cable
output

485.5
PMG optional
Ø 511.175 - 0.127

12
79.5
0

765.5
Ø 75 m6

Ø 235

20
ØP

12 holes M10

280 - 1
0
equid. on
Ø 530.225

17
B 25 AIR INLET 80
AIR OUTLET 457
182 BB Ø 21 x 6 527
6 C Access to rotating diodes

Dimensions (mm) and weight

Type L without PMG LB C BB B P Xg Weight (kg)
LSA 46.3 S4 997 892 389 368 318 600 427 674
LSA 46.3 S5 997 892 389 368 318 640 427 682
LSA 46.3 M7 1042 937 389 368 318 640 449 754
LSA 46.3 M8 1042 937 389 368 318 640 449 754
LSA 46.3 L10 1137 1032 485 424 374 640 496 888
LSA 46.3 L11 1137 1032 485 424 374 640 496 888

Torsional analysis data

Xr
Ø 105.8

Ø 120
Ø 110

Ø 115

Ø 115
Ø 110
Ø 75

Ø 80
Ø 92

Ø 88
Ø 75

Lr

Centre of gravity: Xr (mm), Rotor length: Lr (mm), Weight: M (kg), Moment of inertia: J (kgm2): (4J = MD2)
Type Xr Lr M J
LSA 46.3 S4 430 990 250 2.76
LSA 46.3 S5 430 990 250 2.76
LSA 46.3 M7 456 1035 280 3.09
LSA 46.3 M8 456 1035 280 3.09
LSA 46.3 L10 503 1130 336 3.79
LSA 46.3 L11 503 1130 336 3.79

NOTE : Dimensions are for information only and may be subject to modifications. Contractual 2D drawings can be downloaded from the Leroy-
Somer site, 3D drawing files are available upon request.
The torsional analysis of the transmission is imperative. All values are available upon request.

Electric Power Generation 11

www.leroy-somer.com/epg

Connect with us at:

© 2022 Moteurs Leroy-Somer SAS. The information contained in this brochure is for guidance only and
does not form part of any contract. The accuracy cannot be guaranteed as Moteurs Leroy-Somer SAS
have an ongoing process of development and reserve the right to change the specification of their products
without notice.
Moteurs Leroy-Somer SAS. Headquarters: Bd Marcellin Leroy, CS 10015, 16915 Angoulême Cedex 9,
France. Share Capital: 38,679,664 €, RCS Angoulême 338 567 258.

5273 en - 2022.12 / p