1:PRODUCTS & PACKING LIST

1.2 Packing list:

1* Solar panel

1*User manual
1* Universal bracket
Guarantee
card
1*Screw kit
1*Hexagon spanner 1*Guarantee card
1*Screw driver
8*Screws
2*Socket hexagon
screws
1* PTZ Camera 4*Tapping screw 1*Qualification

2 .INSTALLATION
2.1 Intergrated installation 2.2 Separated installation
Product Diagram

Electricity test Solar panel

Battery compartments
Waterproof rubber plug Power switch
USB charge port Solar power
Battery 18650 cable
Battery compartments cover Camera power
cable
Screw
Waterproof cap
Socket hexagon
screw Socket hexagon
screw Accessories needed
Universal bracket (not standard configuration)
Screw Antenna

1*Bracket 1*Extral power

Bracket base cable 2M
Microphone 3. APP INSTALLATION
Photosensitive 3.1. Scan the following QR codes or seach for〝UBox〞from the App
White light LED Store(for iOS devices) or Google Play Store (for Android smartphones)
Lens Interface cover to download and install the app.
Indicator Screw of the
Infrared LED Cover

Reset switch
TF card
SIM card
(4G camera)

3.2. APP REGISTRATION

3.2.1.Open the app then input your E-mail address then press 'Register'.
Check and select to agree the agreement then your E-mail box will get an
verification code.( For better user's experience, please allow to open all
permissions to avoid missing any notifications from the app.)

3.2.2. Input the “Verification code〞and press 'Next'.（if you not found
the mail you might find the code in your email spam box. ）
 3.2.3. Set the login password and confrim the login password.Then press
'Register' to next step.(For your password safety, the password requires
more than 8 characters plus a combination of letters)
3.2.4.Enter your E-mail address, and input your login password. Then press 'Login'.

4.5.Connect the device with power supply, and make sure your mobile phone is
connected to an available Wi-Fi. Then press 'Setup device'.
4.6.After the power on the device, wait for the voice prompt〝The device is waiting
for pairing,Which means your device is in pairing mode.
4.7.If you did not hear the voice prompt, please press the RESET button until the
blue indicator to lighup and then release. The device will reboot and enter the
pairing state.
4.8.The app will input the Wi-Fi name automatically, please input the correct Wi-Fi
Password. Then you can choose the 'QR code configuration' or 'Sound wave
configuration' .
4.9.Sound wave configuration:Make sure camera and mobile phone within 1M
distance,you will hear the wave sound DI DI,follow the tips showed in the mobile
to finish configuration.

4. WI-FI CONNECTION
4.1. Press 'Add Family' then set the room or position as per reminders.
4.2.Enter your family name and then press 'Next'.
4.3.Input the necessary information just like Country, Province, then press 'Done'.
4.4. Press 'Add a device' to add a smart device

4.10. QR code configuration: Select the QR code configuration then the mobile phone
display a QR code. Use the device to scan to the QR code 10cm away from the
mobile phone.
4.11.Select the family name or device location then press 'Done.'
4.11.The device will enter to the device list automatically. Setup success! The device
is ready to use.

Check〝my account〞name and change

password;

Check and purchase the Cloud storage;

Check and purchase the AI Cloud Facial
Recognition;
Check and add my friends list and permission;
5. DEVICE SETTING
Set the default voice and resolution for the devices;
Enter to select your family or smart device location
Press to add a smart device
Turn on/off the push notification.
Settings: Sharing, Cloud storage, Delete the device.. Click the〝Calendar〞icon on the right top Choose the desired date to check all videos
corner , then choose the date to playback from the cloud.
the vicoes from cloud storage.
Press to enter the preview section.

Press to add a smart device

Account and value-added account management

6. SPECIAL NOTES!
6.1 .The device is equipped with a rechargeable lithium battery. The battery life will be affected by
the device wake-up time and the number of wake-ups. Therefore, the PIR sensor alarm
Smart device basic settings detection function is used in an environment with a lot of people. It is recommended to turn off
Could se〝
t Storage management, Flip screen, or set the device to low sensitivity to reduce device wake-up and call times extend battery life.
Environmental model,PIR detection, Sleep time, When the battery is low, please charge the battery immediately.
6.2. Keep the device in range of your router.Make sure the device is placed close to the Wi-Fi router.
Power frequency, LED indicator, Device name〞 If there has to be thick or insulated objects between the device and the Wi-Fi router, which may
Could check the information o〝
f Device name, lead to weak Wi-Fi signal, please make sure the Wi-Fi signal is in good level before you start
Device ID, Model, FW version, Manufacurter, using the device.
6.3.It is a delicated device with low power consumption design. Everytime the device is awakened
Check for the FW updates..〞 and will work for few seconds.After that, the device will enter standy mode to save power. You
can set the work time in the app settings.
6.4.Because the mainland China does not receive Google's system push messages, you need to
Press to add a smart device open the app's self-starting function in your phone to receive push messages.
6.5. This device provides one month of free cloud storage services. If you need to continue using
Screenshot value-added services after the trial period expires, you need to purchase them in the app.
Playback switch 'Micro SD memory' and 'Cloud storage’
Take a video for the live view
Microphone - Speak to the smart device side.
7