Data Sheet

28-Port 10G L2/L3 Switch 19" PoE+ fanless

Layer3
Layer3 feature set for broad application diversity

10G uplinks (IEEE 802.3ae)

4 x 1/10G uplink ports in SFP/SFP+ version

PoE+ PSE Local Ports (IEEE 802.3at)

PoE/PoE+ PSE Local Ports with up to 30W per port, PoE budget 350W

IT security
Feature set for high level of IT security

Fanless design
easy to maintain, no noise emission for use in the workstation area

Network redundancy
Feature set for meshed topologies

MICROSENS NMP integrated*

integrated in MICROSENS NMP software for clear administration and easy group
configurations

©2021_MICROSENS GmbH & Co. KG_Küferstr. 16_59067 Hamm/Germany_www.microsens.com

Data_Sheet_28-Port 10G L2/L3 Switch 19" PoE+ fanless Page 2/5

Software Features

System Management IP Routing

 WEB GUI (http/https)  Static Routing
 CLI (Telnet/SSH, console)  RIP v1/v2 (IPv4), OSPF v1/v2
 SNMP v1/v2/v3  ISIS (IPv4), BGP (IPv4)
 SNMP traps  Static ARP
 Integration in Central management  Static ND
software (MICROSENS NMP)*  VRRP v1/v2/v3 (Virtual Redundant
 IP interface configuration per VLAN Route Protocol)
 MAC address table  PIM
 Configuration upload/download  Support duplex transfer check
 Firmware upgrade mechanism

 Factory default reset Quality of Service (QoS)

 System reboot
 Layer 1 priority (port-based)
 User right settings
 Layer 2 priority based on 802.1Q
 System status, history VLAN tags

Port Configuration  Layer 3 priority based on 802.1p

(DSCP)
 Port enable/disable  8 priority levels (4 queues)
 Individual port name  Strict priority or WRR (Weighted
 Speed and full/half duplex settings Round Robin)
 Flow control
Link Aggregation
 Rate limiting
 Port isolation  Up to 5 groups
 Static Link Aggregation
Power-over-Ethernet PoE/PoE+
IP Multicast
 IEEE 802.3af PoE (max. 15 W/Port)
 IEEE 802.3at PoE+ (max. 30 W/Port)  IGMP Snooping

 Enabling or disabling PoE per port Reliability

 Port priority settings
 Spanning Tree (STP) according to
 Limitation of total PoE budget IEEE 802.1D
 Rapid Spanning Tree (RSTP) according
DHCP
to IEEE 802.1w
 DHCP Client/Server/Relay/Repeater  Multiple Spanning Tree (MSTP)
 DHCP Snooping  Profi Ring protocol

Virtual LANs (VLANs) Security

 4k VLANs  RADIUS client (802.1X)
 Access and trunk mode  IP-, port-, MAC-, or VLAN-based
binding combinations
 Access Control List (ACL)
 Time range management

©2021_MICROSENS GmbH & Co. KG_Kueferstr. 16_59067 Hamm/Germany_www.microsens.com

Data_Sheet_28-Port 10G L2/L3 Switch 19" PoE+ fanless Page 3/5

Technical Specifications

Switch OoB Port

Type 10 Gigabit Ethernet L2/L3 Number 1

Switch – 19” 1U, PoE+ PSE
Type 10/100Base-TX
IEEE 802.3 compliant, fanless
design Connector RJ-45 port
Performance Store-and-forward
Switching 128 Gbps LEDs
Capacity
Port LEDs Link/activity, PoE status
Packet 95.2 Mpps
Forwarding Rate Device LED Power

Packet Buffer 1.5 Mbit

Power Supply
MAC addresses 16 k, automatic learning and
aging
Input Voltage 100..240 VAC
Jumbo Frames 10 kBytes
Frequency 50/60 Hz
Power 380 W (including PoE)
Twisted-Pair Ports Consumption

Number 24 Connector Cold device plug

Type Gigabit Ethernet, Triple Speed

10/100/1000Base-T Environmental Conditions
Connector RJ-45 port, shielded
Temperature Operation -10..+50 °C
Cable type Twisted-Pair cable, Category Storage -40..+85 °C
5e, impedance 100 Ohm, length
Humidity 5..95%, non-condensing
max. 100 m
Flow Control Pause Frames (IEEE 802.3x),
configurable Mechanic
Pin out Auto MDI/MDI-X, Auto Polarity Dimensions 442 x 320 x 44.5
(in mm) (W x D x H, without connectors)
Power-over- Power Sourcing Equipment
Ethernet (PSE) IEEE 802.3af/at Material Aluminium alloy
Class 0-4, max. 15 W / 30 W
Weight Approx. 6.5 kg
PoE Voltage 54 VDC
Mounting 19” (1U)
Total PoE 350 W
Budget
Standards
PoE Lines 1/2 (+), 3/6 (-)
CE 2014/30/EU (EMC)
Fiber Ports (SFP+ slots) 2014/35/EU (Low voltage)
2011/65/EU (RoHS)
Number 4 Safety EN 62368-1
Type 1/10GBase-X SFP+ slot, Emitted EN 55032:2015
support of SFP digital interference
diagnostics function
Immunity EN 55035:2017
Connector LC (SFP transceiver, not
included) Surge Immunity 6 kV (IEC61000-4-5)

Flow Control Pause Frames (IEEE 802.3x), ESD Immunity 6 kV contact discharge, 8 kV air
configurable discharge (IEC 6100-4-2)
Ethernet IEEE 802.3
CLI Console IEEE 802.3u (100Base-TX)
IEEE 802.3ab (1000Base-T)
IEEE 802.3z (1000Base-X)
Number 1
IEEE 802.3ae (10GBase-X)
Type RS-232 IEEE 802.3x (flow control)
IEEE 802.3af/at (PoE/PoE+)
Connector RJ-45 port

©2021_MICROSENS GmbH & Co. KG_Kueferstr. 16_59067 Hamm/Germany_www.microsens.com

Data_Sheet_28-Port 10G L2/L3 Switch 19" PoE+ fanless Page 4/5

Dimensions [in mm]

Interfaces

©2021_MICROSENS GmbH & Co. KG_Kueferstr. 16_59067 Hamm/Germany_www.microsens.com

Data_Sheet_28-Port 10G L2/L3 Switch 19" PoE+ fanless Page 5/5

Order Information

Description Article No.:

28-Port 10G L2/L3 Switch 19" PoE+ fanless

28-Port 10G L2/L3 Switch 19" PoE+ fanless

4x 1/10GBase-X SFP+-Slots, managed,
MS400981M
24x 10/100/1000Base-T PoE+,
int. 100~240VAC (C14), console port (RJ-45)

Accessories
Description Article No.:

SFP und SFP+ Transceiver (xWDM on request)

SFP GbE Transceiver 1.25G SX

MS100200D
Multimode 850nm, DDM, LC duplex

SFP GbE Transceiver 1.25G LX

MS100210D
SingleMode 1310nm, 10km, DDM, LC duplex

10G SFP+ Transceiver (WDM on request)

SFP+ 10G Transceiver SR

MS100700D
Multimode 850nm, DDM, LC

SFP+ 10G Transceiver LR

MS100702D
SingleMode 1310nm, 10km, DDM, LC

Alternative 19” Switches

Description Article No.:

19” Switches PoE+

28-Port 10G L2/L3 Switch 19" PoE+

4x 1/10GBase-X SFP+-Slots, managed,
MS400980M
24x 10/100/1000Base-T PoE+,
int. 100~240VAC (C14), console port (RJ-45)

19” Multi Fiber Switches

28-Port 10G Multi Fiber L2/L3 Switch 19"

4x 1/10GBase-X SFP+-Slots, managed,
MS400990M
24x 1000Base-X SFP-Slots, 8x Combo,
int. 100~240VAC (C14), console port (RJ-45)

52-Port 10G Multi Fiber L3 Switch 19"

4x 1/10GBase-X SFP+-Slots, managed L3,
MS400991M
48x 1000Base-X SFP-Slots, OOB-Port (RJ-45),
int. 100~240VAC (C14), console port (RJ-45)

This document in whole or in part may not be duplicated, reproduced, stored or retransmitted without prior written permission of MICROSENS GmbH
& Co. KG. All information in this document is provided ‘as is’ and subject to change without notice. MICROSENS GmbH & Co. KG disclaims any
liability for the correctness, completeness or quality of the information provided, fitness for a particular purpose or conse cutive damage.
MICROSENS is a trademark of MICROSENS GmbH & Co. KG. Any product names mentioned herein may be trademarks and/or registered trademarks
of their respective companies. MG0521 DAT301_MS400981M_19i-Fanless-10G-PoE+Switch_EN_2021

*In preparation.

Publication: 2021-05-21/MG

©2021_MICROSENS GmbH & Co. KG_Kueferstr. 16_59067 Hamm/Germany_www.microsens.com