JNTU R20 B.Tech - Mechnaical Engineering III IV Year Course Structure Syllabus

JNTUA B.Tech.
R20 Regulations
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR

(Established by Govt. of A.P., ACT No.30 of 2008)
ANANTAPUR – 515 002 (A.P) INDIA
B.TECH. - MECHANICAL ENGINEERING

Proposed Course Structure (R20) – III & IV Year
Semester–V
S.No. Course Code Course Name L T P Credits
1. 20A03501 CAD/CAM 3 0 0 3
2. 20A03502 Design of Machine Members 3 0 0 3
3. 20A03503T Metrology and Measurements 3 0 0 3
4. Professional Elective - I 3 0 0 3
20A03504a Automation & Robotics
20A03504b Tool Design
20A03504c Power Plant Engineering
5. Open Elective – I 3 0 0 3
6. 20A03503P Metrology and Measurements Laboratory 0 0 3 1.5
7. 20A03506 Computer Aided Modeling Laboratory 0 0 3 1.5
8. Skill oriented course - III
20A03507 Innovation through IoT 1 0 2 2
9. 20A03508 Evaluation of Community Service Project 1.5
Total 21.5
Open Elective Course – I

S.No. Course Code Course Name Offered by the Dept.
1 20A01505 Building Technology CE
2 20A02505 Electric Vehicles EEE
3 20A04505 Digital Electronics ECE
4 20A05505a Java Programming CSE & Allied /IT
5 20A05602T Artificial Intelligence
6 20A12502 Mobile Application Development using Android
7 20A27505 Computer Applications in Food Processing FT
8 20A56501 Materials Characterization Techniques Physics
9 20A51501 Chemistry of Energy Materials Chemistry
Note:
1. A student is permitted to register for Honours or a Minor in IV semester after the results of
III Semester are declared and students may be allowed to take maximum two subjects per
semester pertaining to their Minor from V Semester onwards.
2. A student shall not be permitted to take courses as Open Electives/Minor/Honours with
content substantially equivalent to the courses pursued in the student's primary major.
3. A student is permitted to select a Minor program only if the institution is already offering a
Major degree program in that discipline
JNTUA B.Tech. R20 Regulations
Semester–VI
S.No. Course Code Course Name Semester-VI L T P Credits
1. 20A03601 Dynamics of Machinery 3 0 0 3
2. 20A03602 Finite Element Methods (FEM) 3 0 0 3
3. 20A03603T Heat Transfer 3 0 0 3
4. Professional Elective – II 3 0 0 3
20A03604a Non-Destructive Testing (NDT)
20A03604b Production and operations management
20A03604c Total Quality Management (TQM)
5. Open Elective Course – II 3 0 0 3
6. 20A03606 Computer Aided Design Laboratory 0 0 3 1.5
7. 20A03607 Computer Aided Manufacturing Laboratory 0 0 3 1.5
8. 20A03603P Heat Transfer Laboratory 0 0 3 1.5
9. Skill oriented course - IV 1 0 2 2
20A03608 3D Printing practice
10. Mandatory Non-credit Course 2 0 0 0
20A99601 Intellectual Property Rights & Patents
Total 21.5
Industry Internship (Mandatory) for 6 - 8 weeks duration during summer vacation
Open Elective Course – II
S.No Course Code Course Name Offered by the Dept.

1 20A01704 Environmental Economics CE
2 20A02605 Smart Electric Grid EEE
3 20A04605 Signal Processing ECE
4 20A04701b Introduction to Internet of Things ECE/CSE
5 20A05605a Principles of Operating Systems CSE & Allied /IT
6 20A05605b Foundations of Machine Learning
7 20A05605c Oundations of Machin
Data Analytics Using R
8 b
20A27605 Food Refrigeration and Cold Chain Management FT
9 20A54701 Wavelet Transforms & its applications Mathematics
10 20A56701 Physics Of Electronic Materials and Devices Physics
11 20A51701 Chemistry of Polymers and its Applications Chemistry
Honors/Minor courses (The hours distribution can be 3-0-2 or 3-1-0 also) 4 0 0 4

Semester–VII
S.No. Course Code Course Name L T P Credits
Semester-VII
1. Professional Elective Course– III 3 0 0 3
20A03701a Modern manufacturing Methods
20A03701b Design for Manufacturing (DFM)
20A03701c Operations Research
2. Professional Elective Course– IV 3 0 0 3
20A03702a Automobile Engineering
20A03702b Mechanical Vibrations
20A03702c Refrigeration & Air Conditioning
3. Professional Elective Course– V 3 0 0 3
20A03703a Mechatronics & MEMS
20A03703b Design of Oil Hydraulics and Pneumatics
20A03703c Geometric dimensioning and tolerances
4. Humanities Elective – II 3 0 0 3
20A52701a Entrepreneurship and Incubation
20A52701b Management Science
20A52701c Enterprise Resource Planning
5. Open Elective Course – III 3 0 0 3
6. Open Elective Course – IV 3 0 0 3
7. Skill oriented course - V 1 0 2 2
20A03706 Industrial Automation
8. 20A03707 Evaluation of Industry Internship 3
Total 23
Open Elective Course – III
S.No CourseCode Course Name Offered by the Dept.
1 20A01704 Cost Effective Housing Techniques CE
2 20A02704 IOT Applications in Electrical Engineering EEE
3 20A04704 Electronic Sensors ECE
4 20A05704a Web Technologies CSE & Allied /IT
5 20A05704b VR & AR for Engineers
6 20A05704c Software Engineering
7 20A27704 Human Nutrition FT
8 20A54702 Numerical Methods for Engineers Mathematics
9 20A56702 Sensors And Actuators for Engineering Applications Physics
10 20A51702 Applications
Chemistry of Nanomaterials and Applications Chemistry
Open Elective Course – IV
S.No CourseCode Course Name Offered by the Dept.
1 20A01705 Health, Safety & Environmental management CE
2 20A02705 Renewable Energy Systems EEE
3 20A04705 Microcontrollers and Applications ECE
4 20A05705a Cyber Security CSE & Allied /IT
5 20A05705b Introduction to Full Stack Development
6 20A05705c Industrial IoT
7 20A27705 Waste and Effluent Management FT
8 20A54703 Number theory & its applications Mathematics
9 20A56703 Smart Materials and Devices Physics
10 20A51703 Green Chemistry and Catalysis for Sustainable Chemistry
Environment
Semester-VIII
S.No. Course Code Course Name Category L T P Credits
1. 20A03801 Full Internship & Project work PR 12
Total 12
COURSES OFFERED FOR HONOURS DEGREE IN MECHANICAL ENGINEERING

S.No. Course Course Title Contact Hours
Code per week Credits
L T
1 20A03H01 Mechanics and manufacturing of Composite
3 1 4
materials
2 20A03H02 Application of Computational Fluid Dynamics 3 1 4
3 20A03H03 Advanced Automotive Electronics 3 1 4
4 20A03H04 Applications of Optimization Techniques 3 1 4
5 20A03H05 MOOC I: Design of Mechatronic Systems 2
https://onlinecourses.nptel.ac.in/noc22_me128
/preview
6 20A03H06 MOOC II: Heat Exchangers: Fundamentals 2
and Design Analysis
https://onlinecourses.nptel.ac.in/noc22_me106
/preview
LIST OF MINORS OFFERED TO MECHANICAL ENGINEERING

S.No. Minor Title Department offering the Minor
1. Construction Technology Civil Engineering
2. Environmental Geotechnology Civil Engineering
3. Energy Systems EEE
4. Internet of Things ECE
5. Food Science Food Technology
6. Artificial Intelligence & Data Science CSE& Allied/IT
7. Virtual & Augmented Reality
8. Cyber Security &Blockchain Technologies

B.Tech (ME)– III-I Sem L T P C
3 0 0 3
(20A03501) CAD/CAM
Course Objectives:
 Understand the basics of CAD/CAM, geometric representation, transformations.
 Explain geometric modeling methods in CAD.
 Familiarize numerical control (NC), computer numerical control (CNC) and direct numerical
control (DNC) machines.
 Impart knowledge on manual part programming and computer aided part programming.
 Explain the principles robotics, CIM, AR,VR and AI in CIM
Course Outcomes:
 Apply the basics of geometric representation and transformations in CAD/CAM. L3
 Choose geometric modelling methods for building CAD models. L1
 Compare NC, CNC and DNC. L2
 Develop manual and computer aided part programming for turning and milling operations. L3
 Summarize the principles of robotics AR, VR and AI in CIM.
UNIT IIntroduction to CAD/CAM

CAD/CAM: Introduction, hardware and software, I/O devices, benefits. Graphics standards-Neutral
file formats – IGES, STEP.
2D and 3D geometric transformations: Translation, scaling, rotation, mirroring, homogenous
transformations, concatenation of transformations, viewing transformations.
UNIT IIGeometric Modelling
Parametric representation: Representation of curves, Hermite curves, Spline, Bezier and B-spline
curves in twodimensions; Geometric modelling of surfaces: Surface patch, Coons and bicubic
patches, Bezier and B-spline surfaces, sweep surfaces, surface of revolution, blending of surfaces
Geometric Modelling of Solids: Wireframe, surface modelling, solid entities, Boolean operations,
CSG approach and B-rep of solid modelling, geometric modelling of surfaces.
UNIT IIIComputer Aided Manufacturing (CAM)
Computer Aided Manufacturing (CAM): Structure of numerical control (NC) machine tools,
designation of axes, drives and actuation systems, feedback devices, computernumerical control
(CNC) and direct numerical control (DNC), adaptive control system, CNC tooling, automatic tool
changers and work holding devices, functions of CNC and DNC systems.
UNIT IVPart Programming and APT Programming
Part Programming: Part programming instruction formats, information codes, preparatory functions,
miscellaneous functions (G-codes, M-codes). Tool codes and tool length offset, interpolations canned
cycles.
APT Programming: APT language structure, APT geometry, Definition of point, line, circle, plane.
APT Motion Commands: set-up commands, pint to point motion commands; continuous path motion
commands part programming preparation for typical examples (milling and turning operation)
UNIT VAutomation
Automation: Anatomy and configuration of robot, characteristics of robots,grippers, application of
robots in manufacturing, robot programming languages, Group Technology, Introduction to computer
integrated manufacturing, Introduction to Virtual Reality (VR), Augmented Reality (AR) and
Artificial Intelligence (AI).
Textbooks:
1. P. N. Rao, CAD/CAM: Principles and applications, 3/e, Tata McGraw-Hill, Delhi, 2017.
2. Ibrahim Zeid, R.Siva Subramanian, CAD/CAM: Theory and Practice, 2/e, Tata McGraw-Hill,
Delhi, 2009.
Reference Books:
1. Mikell P. Groover, Emory W. Zimmers , CAD/CAM, 5/e, Pearson Prentice Hall of India,
Delhi, 2008.
2. P. Radhakrishnan, S. Subramanyan& V. Raju, CAD/CAM/CIM, 3/e, New Age International
Publishers, 2008.
3. Computer Aided Manufacturing, 3/e, Tien Chien Chang, Pearson, 2008.
Online Learning Resources:

 https://onlinecourses.nptel.ac.in/noc20_me44/preview
 https://www.youtube.com/watch?v=EgKc9L7cbKc
 https://www.youtube.com/watch?v=KXFpTb9cBpY
 https://web.iitd.ac.in/~hegde/cad/lecture/L01_Introduction.pdf
 https://www.vssut.ac.in/lecture_notes/lecture1530947994.pdf
 https://www.iare.ac.in/sites/default/files/lecture_notes/CAD_CAM_LECTURE_NOTES.pdf

3 0 0 3
(20A03502) DESIGN OF MACHINE MEMBERS
Course Objectives:
• Provide an introduction to design of machine elements.
• Familiarize with fundamental approaches to failure prevention for static and dynamic
loading.
• Explain design procedures to different types of joints.
• Teach principles of clutches and brakes and design procedures.
• Instruct different types of bearings and design procedures.
Course Outcomes:
At the end of the course the students will be able to
• Estimate safety factors of machine members subjected to static and dynamic loads. (L5)
• Design fasteners subjected to variety of loads. (L6)
• Selectof standard machine elements such as keys, shafts, couplings, springs and bearings.
(L1)
• Design clutches brakes and spur gears. (L6)
UNIT I Introduction, Design for Static and Dynamic loads
Mechanical Engineering Design: Design process, design considerations, codes and standards of
designation of materials, selection of materials.
Design for Static Loads: Modes of failure, design of components subjected to axial, bending,
torsional and impact loads. Theories of failure for static loads.
Design for Dynamic Loads: Endurance limit, fatigue strength under axial, bending and torsion,
stress concentration, notch sensitivity. Types of fluctuating loads, fatigue design for infinite life.
Soderberg, Goodman and modified Goodman criterion for fatigue failure. Fatigue design under
combined stresses.
UNIT II Design of Bolted and Welded Joints
Design of Bolted Joints: Threaded fasteners, preload of bolts, various stresses induced in the bolts.
Torque requirement for bolt tightening, gasketed joints and eccentrically loaded bolted joints.
Welded Joints: Strength of lap and butt welds, Joints subjected to bending and torsion. Eccentrically
loaded welded joints.
UNIT III Power transmission shafts and Couplings
Power Transmission Shafts: Design of shafts subjected to bending, torsion and axial loading. Shafts
subjected to fluctuating loads using shock factors.
Couplings: Design of flange and bushed pin couplings, universal coupling.
UNIT IV Design of Clutches, Brakes and Springs
Friction Clutches: Torque transmitting capacity of disc and centrifugal clutches. Uniform wear
theory and uniform pressure theory.
Brakes: Different types of brakes. Concept of self-energizing and self-locking of brake. Band and
block brakes, disc brakes.
Springs: Design of helical compression, tension, torsion and leaf springs.
UNITV Design of Bearings and Gears
Design of Sliding Contact Bearings: Lubrication modes, bearing modulus, McKee's equations,
design of journal bearing. Bearing Failures.
Design of Rolling Contact Bearings: Static and dynamic load capacity, Stribeck's Equation,
equivalent bearing load, load-life relationships, load factor, selection of bearings from manufacturer's
catalogue.
Design of Gears: Spur gears, beam strength, Lewis equation, design for dynamic and wear loads.
Textbooks:
1. R.L. Norton, Machine Design an Integrated approach, 2/e, Pearson Education, 2004.
2. V.B.Bhandari, Design of Machine Elements, 3/e, Tata McGraw Hill, 2010.
3. Dr. N. C. Pandya &Dr. C. S. Shah, Machine design, 17/e, Charotar Publishing House Pvt.
Ltd, 2009.
Reference Books:
1. R.K. Jain, Machine Design, Khanna Publications, 1978.
2. J.E. Shigley, Mechanical Engineering Design, 2/e, Tata McGraw Hill, 1986.
3. M.F.Spotts and T.E.Shoup, Design of Machine Elements, 3/e, Prentice Hall (Pearson
Education), 2013.
4. K. Mahadevan &K.Balaveera Reddy, Design data handbook, CBS Publications, 4/e, 2018.
 https://www.yumpu.com/en/document/view/18818306/lesson-3-course-name-design-of-
machine-elements-1-nptel
 https://www.digimat.in/nptel/courses/video/112105124/L01.html
 https://dokumen.tips/documents/nptel-design-of-machine-elements-1.html
• http://www.nitttrc.edu.in/nptel/courses/video/112105124/L25.html

3 0 0 3
(20A03503T) METROLOGY AND MEASUREMENTS
Course Objectives:
 Introduce the basic concepts of metrology and measurement methods.
 Demonstrate the importance of metrology in manufacturing
 Explain the concepts of transducers and its practical applications.
 Expose with various measuring instruments
 Familiarize calibration methods of various measuring instruments.
Course Outcomes:
 List various measuring instruments used in metrology.
 Examine geometry of screw threads and gear profiles.
 Measure force, torque and pressure.
 Calibrate various measuring instruments.
UNIT I
Concept of measurement
Concept of Measurement: General concept-generalized measurement system, units and standards,
measuring instruments, sensitivity, readability, range of accuracy, precision, static and dynamic
response, repeatability, systematic and random errors, correction, calibration, terminology and limits
fits and tolerances, hole basis and shaft basis system, interchangeability.
Limit Gauges And Gauge Design: Plug, Ring, Snap, Gap, Taper gauges. Taylor's principle. Design
of Go and No Go gauges.
Linear and Angular Measurement: Linear measuring instruments: Vernier instruments,
micrometers, slip gauges, tool makers microscope. Comparators: Mechanical, pneumatic and
electrical. Angular measurements: Sine bar, bevel protractor and angle dekkor, rollers and spheres
used to determine the tapers.
UNIT – II
Flatness and Surface Roughness measurement
Flatness Measurement: Measurement of flatness – straight edges – surface plates, optical flat and
autocollimators, interferometers and their applications.
Surface Roughness Measurement: Terminology systems, differences between surface roughness
and surface waviness- Numerical assessment of surface finish - CLA, R.M.S Value-Ra , Rz values,
Methods of measurement of surface finish-profilograph, talysurf, BIS symbols for indication of
surface roughness.
UNIT – III
Screw Thread and Gear Measurement
Screw thread measurements: Elements of threads, errors in screw threads, various methods for
measuring external and internal screw threads, screw thread gauges.
Gear Measurement: Gear tooth terminology, measurement of gear elements-run out, lead, pitch
backlash, profile, pressure angle, tooth thickness, diameter of gear, constant chord and base tangent
method.
Coordinate Measuring Machine (CMM)- Construction and features.
UNIT – IV
Measurement of Displacement and Strain
Measurement of Displacement: Theory and construction of various transducers to measure
displacement – Piezo-electric, inductive, capacitance, resistance, ionization and photoelectric
transducers, calibration procedures.
Measurements of Strain: Various types of electrical strain gauges, gauge factor, method of usage of
resistance strain gauge for bending, compressive and tensile strains, usage for measuring torque,
strain gauge rosettes.
UNIT – V
Measurement of Force, Torque and Pressure
Measurement of Force: Direct method - analytical balance, platform balance; elastic members – load
cells, cantilever beams and proving rings.
Measurement of Torque: Torsion bar dynamometer, servo controlled dynamometer and absorption
dynamometer.
Measurement of Pressure: Standards and calibration, basic methods of pressure measurement, dead
weight gauges and manometers, High and low pressure measurement, Elastic transducers.
Textbooks:
1. Beckwith, Marangoni, Linehard, Mechanical Measurements, 6/e, PHI, 2013.
2. R.K. Jain, Engineering Metrology, 20/e, Khanna Publishers, 2013.
Reference Books:
1. Mahajan, Engineering Metrology, 2/e, Dhanpat Rai, 2013.
2. S.Bhaskar, Basic Principles - Measurments and Control Systems, Anuradha Publications,
2014.
3. Anand K Bewoor& Vinay A Kulkarni, Metrology & Measurement, 15/e, McGrawHill, 2015.
4. D.S. Kumar, Mechanical Measurements & Control, Metropolitan Publishers, 5/e, 2015.

 https://nitsri.ac.in/Department/Mechanical%20Engineering/MEC_405_Book_2,_for_Unit_2B
.pdf
https://www.digimat.in/nptel/courses/video/112106179/L01.html
https://www.youtube.com/watch?v=tczyyM4Dykc
 https://www.youtube.com/watch?v=_UsAiZmRC1M
https://www.youtube.com/watch?v=oCkaxMI19X8

3 0 0 3
(20A03504a) AUTOMATION AND ROBOTICS
(PROFESSIONAL ELECTIVE-I)
Course Objectives:
The objectives of this course are to
 Describe the basic concepts of automation in manufacturing systems.
 Acquire the fundamental concepts of automated flow lines and their analysis.
 Classify automated material handling, automated storage and retrieval systems.
 Illustrate adaptive control systems and automated inspection methods.
 Define the fundamental concepts of industrial robotics.
 Apply basic mathematics to calculate the robot kinematic and dynamic mechanics
• Understand the robot programming methods and software packages.
Course Outcomes:
At the end of the course student will be able to
 Classify the types of hardware components of automation and control system.
 Design a simple material handling system for low-cost manufacturing
 Design a simple gripper for robot
 Compare the types of actuators used in robot manipulator
 Understand the requirements and features of robot programming
 Demonstrate the various applications of robots in manufacturing
UNIT I Introduction
Introduction: Automation in production system, need, types, Principles and Strategies of
automation, levels of automation, basic elements of an automated system, hardware components for
automation and process control, mechanical feeders, hoppers, orienters, high speed automatic insertion
devices.
Automated flow lines& transfer mechanisms, fundamentals of transfer Lines, flow lines with or
without buffer storage.
UNIT II Assembly Line Balancing and Automated Manufacturing System
Assembly Line Balancing: Assembly process and systems assembly line, line balancing algorithms,
ways of improving line balance, flexible assembly lines.
Material handling and Identification Technologies: Overview of automatic material handling
systems, principles and design consideration, material transport systems, storage systems, overview of
automatic identification methods.
Automated Manufacturing Systems: Components, classification and overview of manufacturing
systems, manufacturing cells, GT and cellular manufacturing, FMS and its planning and
implementation.
UNIT III Introduction to Robotics
Introduction: Brief history of robots, classification of robot, functional line diagram, degrees of
freedom. Elements of robot - types and its functions, factors to be considered in the design of grippers.
Robot Actuators And Feedback Components: Actuators, Pneumatic, Hydraulic actuators, Electric
&Stepper motors, comparison. Position sensors - potentiometers, resolvers, encoders - velocity
sensors, Tactile sensors, Proximity sensors.
UNIT IV Kinematics and Dynamics of a Manipulator
Manipulator Kinematics: Homogenous transformations as applicable to translation, rotations- D-H
notation, Forward and inverse kinematics.
Manipulator Dynamics: Differential transformations, Jacobians, Lagrange - Euler and Newton -
Euler formations.
UNIT V Robot Programming and Applications+
Robot Programming: Methods of programming - requirements and features of programming
languages, software packages, problems with programming languages. Motion path control- slew
motion, joint integrated motion, straight line motion; avoidance of obstacles.
Robot Application in Manufacturing: Material Transfer - Material handling, loading and unloading;
Process - spot and continuous arc welding & spray painting; Assembly and Inspection.
Textbooks:
1. Mikell P.Groover, Automation, Production Systems and Computer Integrated Manufacturing-
Pearson Education.5/e, 2009.
2. Mikell P. Groover and Mitchell Weiss, Roger N. Nagel, Nicholas G.Odrey, Industrial
Robotics –– McGraw Hill, 1986.
Reference Books:
1. S. R. Deb & Sankha Deb, Robotics Technology and Flexible Automation, Tata McGraw-Hill
Education, 2009.
2. R K Mittal and I J Nagrath, Robotics and control, Illustrated Edition, Tata McGraw Hill India
2003.
3. Saeed B. Niku, Introduction to Robotics – Analysis, System, Applications, 2/e, John Wiley &
Sons, 2010.
4. Richard D. Klafter, Thomas Robotic Engineering an integrated approach, PHI publications
1988.
 https://www.edx.org/learn/robotics
 https://www.youtube.com/watch?v=xrwz9IxpMJg
 https://nptel.ac.in/courses/112101098
• https://onlinecourses.nptel.ac.in/noc20_de11/preview

3 0 0 3
(20A03504b) TOOL DESIGN
Course Objectives:
The objectives of this course are to
 Describe the basic concepts of Tool Design.
 Classify Fits and Tolerances used in Tool Design.
 Define the fundamental concepts of Designing of Jigs and Fixtures.
 Apply basic mathematics to design the press tool dies.
 Understand the nomenclature of the milling cutters.
• Explain the conceptual design of CNC machine tools.
Course Outcomes:
At the end of the course student will be able to
 Compare the Ferrous and non ferrous tool materials
 Classify the types of chip formation during orthogonal cutting
 Design Drill Jigs and Fixtures
 Design a simple gripper for robot
 Understand the concept of design of die and piercing operations
 Understand about the tool holding methods, Automatic tool changers and tool positions in CNC
Machine
UNIT IINTRODUCTION TO TOOL DESIGN

Introduction –Tool Engineering – Tool Classifications– Tool Design Objectives – Tool Design in
manufacturing- Challenges and requirements- Standards in tool design-Tool drawings -Surface finish
– Fits and Tolerances - Tooling Materials- Ferrous and Non ferrous Tooling Materials- Carbides,
Ceramics and Diamond -Non metallic tool materials-Designing with relation to heat treatment.
UNIT IIDESIGN OF CUTTING TOOLS
Mechanics of Metal cutting –Oblique and orthogonal cutting- Chip formation and shear angle -
Single-point cutting tools – Milling cutters – Hole making cutting tools- Broaching Tools - Design of
Form relieved and profile relieved cutters-Design of gear and thread milling cutters.
UNIT IIIDESIGN OF JIGS AND FIXTURES
Introduction – Fixed Gages – Gage Tolerances –selection of material for Gauges – Indicating Gages –
Automatic gages – Principles of location – Locating methods and devices – Principles of clamping –
Drill jigs – General considerations in the design of drill jigs – Drill bushings – Methods of
construction –Types of Fixtures – Vice Fixtures – Milling Fixtures – Boring Fixtures – Broaching
Fixtures.
UNIT IVDESIGN OF PRESS TOOL DIES
Types of Dies –Method of Die operation–Clearance and cutting force calculations- Blanking and
Piercing die design – Pilots – Strippers and pressure pads- Presswork materials – Centre of pressure -
Strip layout – Short-run tooling for Piercing – Bending dies – Drawing dies-Design and drafting.
UNIT VTOOL DESIGN FOR CNC MACHINE TOOLS
Introduction –Tooling requirements for Numerical control systems – Fixture design for CNC machine
tools- Sub plate and tombstone fixtures-Universal fixtures– Cutting tools– Tool holding methods–
Automatic tool changers and tool positioners – Tool presetting– General explanation of the Brown
and Sharp machine.
Textbooks:
1. Cyrll Donaldson, George H.LeCain, V.C. Goold, “Tool Design”, Tata McGraw Hill
Publishing Company Ltd., 2000.
2. E.G.Hoffman,” Jig and Fixture Design”, Thomson Asia Pvt Ltd, Singapore, 2004.
Reference Books:
1. P.C.Sharma, A Text book of Production Engineering, S.Chand Publications, 1999.
2. Prakash Hiralal Joshi, “Tooling data”, Wheeler Publishing, 2000
3. Venkataraman K., “Design of Jigs, Fixtures and Presstools”, TMH, 2005.

4. Haslehurst M., “Manufacturing Technology”, The ELBS, 1978.
 https://www.iare.ac.in/sites/default/files/lecture_notes/TOOL%20DESIGN_Lecture_Notes.
pdf
 https://www.cet.edu.in/noticefiles/261_MMP%20Lecture%20Notes-ilovepdf-
compressed.pdf
 https://www.vssut.ac.in/lecture-notes.php?url=production-engineering
 https://nptel.ac.in/courses/112/105/112105233/
 https://www.youtube.com/watch?v=7MkX-sW97rI
 https://nptel.ac.in/courses/112/105/112105126/#

3 0 0 3
(20A03504c) POWER PLANT ENGINEERING
Course Objectives:
● Familiarize the sources of energy, power plant economics and environmental aspects.
● Outline the working components of different power plant.
● Explain renewable energy sources; characteristics, working principle, classify types, layouts,
and plant operations.
● Impart types of nuclear power plants, and outline working principle and advantages and
hazards.
Course Outcomes:
● Outline sources of energy, power plant economics, and environmental aspects
● Explain power plant economics and environmental considerations
● Describe working components of a steam power plant
● Illustrate the working mechanism of Diesel and Gas turbine power plants
● summarize types of renewable energy sources and their working principle
● Demonstrate the working principle of nuclear power plants
UNIT IIntroduction to the Sources of Energy

Introduction to the Sources of Energy - Resources and Development of Power in India. Layouts of
Steam, Hydel, Diesel, MHD, Nuclear and Gas Turbine Power Plants - Combined Power Cycles -
Comparison and Selection.
Power Plant Economics and Environmental Considerations: Capital Cost, Investment of Fixed
Charges, Operating Costs, General Arrangement of Power Distribution, Load Curves, Load Duration
Curve. Definitions of Connected Load, Maximum Demand, Demand Factor, Average Load, Load
Factor, Diversity Factor - Tariff - Related Exercises. Effluents from Power Plants and Impact on
Environment - Pollutants and Pollution Standards - Methods of Pollution Control. Inspection And
Safety Regulations.
UNIT IISteam Power Plant
Modern High Pressure and Supercritical Boilers - Analysis of Power Plant Cycles - Modern Trends in
Cycle Improvement - Waste Heat Recovery, Fluidized Bed Boilers., Fuel and Handling Equipments,
Types of Coals, Coal Handling, Choice of Handling Equipment, Coal Storage, Ash Handling Systems.
Combustion Process- Properties of Coal - Overfeed and Under Feed Fuel Beds, Travelling Grate
Stokers, Spreader Stokers, Retort Stokers, Pulverized Fuel Burning System And Its Components,
Combustion Needs and Draught System, Cyclone Furnace, Design and Construction, Dust Collectors,
Cooling Towers And Heat Rejection. Analysis of Pollution from Thermal Power Plants - Pollution
Controls.CO2 Recorders
UNIT IIIDiesel and Gas Turbine Power Plants
Diesel Power Plant: Diesel Power Plant: Introduction - IC Engines, Types, Construction- Fuel
Storage
Gas Turbine Plant: Introduction - Classification - Construction - Principles of Working Closed and
Open Cycle Gas Turbines. Advantages And Disadvantages Combined Cycle Power Plants.
UNIT IVHydro Electric Power Plants
Hydro Electric Power Plant: Waterpower - Hydrological Cycle / Flow Measurement - Drainage
Area Characteristics - Hydrographs - Storage and Pondage - Classification of Dams and Spill Ways.
Hydro Projects & Plant: Classification - Plant Auxiliaries - Plant Operation Pumped Storage Plants.
UNIT VNon-Conventional Source of Energy
Power From Non-Conventional Sources: Utilization of Solar Collectors- Principle of its Working,
Wind Energy - Types of Turbines - HAWT & VAWT-Tidal Energy. MHD power Generation.
Nuclear Power Station: Nuclear Fuel - Nuclear Fission, Chain Reaction, Breeding and Fertile
Materials - Nuclear Reactor -Reactor Operation.
Types Of Reactors: Pressurized Water Reactor, Boiling Water Reactor, Sodium-Graphite Reactor,
Fast breeder Reactor, Homogeneous Reactor, Gas Cooled Reactor, Radiation Hazards and Shielding -
Radioactive Waste Disposal.
Textbooks:
1. P.K. Nag, Power Plant Engineering, 3/e, TMH, 2013.
2. Arora and S. Domkundwar, A course in Power Plant Engineering, Dhanpat Rai & Co (P) Ltd,
2014.
Reference Books:
1. Rajput, A Textbook of Power Plant Engineering, 4/e, Laxmi Publications, 2012.
2. Ramalingam, Power plant Engineering, SciTech Publishers, 2013.
3. P.C. Sharma, Power Plant Engineering, S.K. Kataria Publications, 2012.

 https://www.iare.ac.in/sites/default/files/lecture_notes/PPE_LECTURE_NOTES.pdf
 http://www.digimat.in/nptel/courses/video/112107291/L21.html
 https://www.youtube.com/watch?v=iWWyI8CZhUw
• https://www.youtube.com/watch?v=D0i1E_lE_TE

0 0 3 1.5
(20A03503P) METROLOGY AND MEASUREMENTS LAB
Course Objectives:
 To experiment with measuring equipments used for linear and angular measurements.
 To find common types of errors in measurement equipment.
 To experiment with different types of sensors, transducers and strain gauges equipment.
 To make use of thermocouples for measurement of temperature.
Course Outcomes:At the end of course the students will be able to:
 Apply different instruments to measure length, width, depth, bore diameters, internal and
external tapers, tool angles, and surface roughness.
 Measure effective diameter of thread profile.
 Conduct different machine alignment tests.
 Measure temperature, displacement, and pressure.
List of Experiments:
Section A:
1. Measurement of bores by internal micrometers and dial bore indicators.
2. Use of gear teeth Vernier callipers and checking the chordal addendum and chordal height of
spur gear.
3. Alignment test on the lathe and milling machine using dial indicators
4. Study of Tool makers microscope and its application
5. Angle and taper measurements by Bevel protractor, Sine bar spirit level etc.
6. Thread measurement by Two wire/Three wire method.
7. Surface roughness measurement by Talysurf instrument.
8. Use of straight edge and sprit level in finding the flatness of surface plate.
Section B:
1. Calibration of Pressure Gauges
2. Study and calibration of Mcleod gauge for low pressure.
3. Calibration of transducer or thermocouple for temperature measurement.
4. Calibration of LVDT transducer for displacement measurement.
5. Calibration of capacitive transducer for angular measurement.
6. Calibration of photo and magnetic speed pickups for the measurement of speed.
7. Study and use of a Seismic pickup for the measurement of vibration amplitude of an engine
bed at various loads.
Virtual Lab:
1. To use Vernier Callipers for the measurement of dimensions of given object.
https://amrita.olabs.edu.in/?sub=1&brch=5&sim=16&cnt=4
2. To use Micrometer Screw Gauge for the measurement of dimensions (Length,
Thickness, Diameter) of given object.
https://amrita.olabs.edu.in/?sub=1&brch=5&sim=156&cnt=4
3. To calculate Young's modulus of elasticity of steel wire by Vernier method
4. https://amrita.olabs.edu.in/?sub=1&brch=5&sim=155&cnt=4
References:
1. Dr. R. Manikandan, Metrology and Measurements laboratory manual, Notion Press; 1/e,
2020.
2. Arul R, Metrology and Measurements Lab Manual, Notion Press; 1/e, 2020.
Online Learning Resources/Virtual Labs:
 https://amrita.olabs.edu.in/?sub=1&brch=5&sim=16&cnt=4
 https://www.sciencedirect.com/science/article/pii/S2212827116003929
 https://sjce.ac.in/wp-content/uploads/2018/04/Metrology-and-Measurement-Laboratory-
Manual.pdf
 https://www.youtube.com/watch?v=jfUNqg8iWmg&list=PL9Q_yrlFD9Opks9GDke48rETYc
nBFBumj&index=5
• https://www.youtube.com/watch?v=X7PjoNEvlMs&list=PL9Q_yrlFD9Opks9GDke48rETYc
nBFBumj&index=6

0 0 3 1.5
(20A03506) COMPUTER AIDED MODELING LABORATORY
Course Objectives:
 To train the students with CAD packages.
 To impart the 2D and 3D modeling skills to the students.
 To import and export different IGES files from one software to another
Course Outcomes:
 Students will be able to design different parts of mechanical equipment’s
 Students will be able to apply their skills in various designing and Manufacturing Industries.
1. Generation of the following curves using “C”/ Python language
a) Cubic Splines
b) Bezier curves
c) B-Splines.
2. Generation of the following surfaces using “C”/Python language
a) Bezier surfaces
a) B-Spline surfaces
3. Typical tasks of Modeling using any solid modeling packages such as PRO/E, IDEAS, CATIA,
etc.,
a) Solid Boolean algebra - 1 Exercise
b) Wireframe &Surface Modelling – 3 Exercises
c) 3D – Drafting in detail – 1 Exercise
d) Production Drawing with Geometric Dimensioning and Tolerances– 3 Exercises
(Preferably for the assembly drawings drawn in Computer Aided Machine Drawing in previous
semester)
References:
1. James D Meadows "Geometric Dimensioning and Tolerancing-Applications, Analysis &
Measurement ASME Y14.5-2018.
2. KL Narayana, P Kannaiah and K.Venkat Reddy, Production Drawing, New Age publishers,
2014.
3. Ibrahim Zeid, Tata Mc Graw hill, CAD/CAM Theory and Practice, 2012.

 https://www.youtube.com/watch?v=er7xJFKv5k&list=PL5w7L_xR0pu2wLbJtOuK49WxJJVjiy
Kks&index=2
 https://www.youtube.com/watch?v=Gy0MKabzDa8&list=PLrOFa8sDv6jccqLnN7UDa1YW4s_
hR6YX0
 https://www.youtube.com/watch?v=k3kFC9uTdUk&list=PLM5xm8DJKViImdv5ZXxQ2NyIdSl
id_jCB

1 0 2 2
(20A03507) INNOVATION THROUGH IoT
(Skill Oriented course III)
Course Objectives:
 To get practical knowledge on Raspberry Pi and Arduino.
 Develop the building blocks of design thinking such as empathize, ideate, prototyping, testing
and validation for real-time applications.
 To apply the concepts of design thinking concepts to IoT
 To provide skills on the applications of product design.
Course Outcomes:At the end of the course, the student will be able to
 Write a program of Raspberry Pi/Arduino for IoT applications
 Understand the relationship between IoT, Cloud services and Software agents
 Explain the troubleshooting methods in IoT based systems
 Apply the design thinking concepts to any type of IoT based applications
 Define a problem statement by conducting the survey
 Design a creative solution for a specified problem.
Module 1
Introduction to Micro Controllers:
Exp 1: Programming of Raspberry Pi3 / Arduino.
Exp 2: Peripheral interfacing to the microcontroller.
Module 2
Introduction and applications of IoT , Cloud services & Software Agents:
Exp 1: Trace the relationship between IoT, Cloud services and Software agents.
Exp 2: Troubleshooting the microcontroller-based systems (IoT based systems or Products).
Module 3
Introduction to Design & Concepts of IoT: Using the concepts of IoT, Implement the 5 stages
(Empathize, Define, Prototype, Ideate, Test) of Design thinking for the following
Exp 1: Measurement of temperature and humdity (whether monitoring).
Exp 2: Soil monitoring (Temperature, Humidity, Phosphorus, Zinc, Iron) / Crop Monitoring.
Exp 3: Design of automatic car wiper for rain sensing
Exp 4: Intelligent transportation system
Exp 5: Vehicle monitoring system
Exp 6: Traffic monitoring and control
Exp 7: Design a device for Fleet and driver management.
Exp 8: Smart lighting system
Exp 9: Smart parking systems
Exp 10: Development of Smart cities
Exp 11: Measurement of water level
Module 4:
Conduct survey and identify the problem on the above experiments, either individual/group and to
avail problem statement for further development.
Module 5:
With the help of problem statement in experiment 6, draw product/system after applying CREATE
(Combine, Rearrange, Enhance, Adapt, Turn around, Eliminate) Tool.
Module 6:
Story boarding of design ideas to transform ‚‘information about needs‘ into design concepts.
References:
1. Jeff Cicolani, Beginning Robotics with Raspberry Pi and Arduino, Apress, 2018.
2. Martin Bates, Interfacing PIC Microcontrollers, Embedded Design by Interative Simulation,

Elsevier Science, 2013.
3. Yasser Ismail, Internet of Things (IoT) for Automated and Smart Applications, IntechOpen,
2019.
4. Manish K Patel, The 8051 Microcontroller Based Embedded Systems, McGraw Hill
Education (India), 2014.
5. Robin E Bentley, Handbook of Temperature Measurement: Temperature and Humidity
measurement, Volume 1, Springer, 1998.
6. Charles Bell, Beginning Sensor Networks with Arduino and Raspberry Pi, Apress, 2014.
7. Julian Happian-Smith, An Introduction to Modern Vehicle Design, Butterworth-Heinemann,
2001.
8. Susan McCahan, Phil Anderson, Mark Kortschot, Peter E. Weiss, Kimberly A. Woodhouse,
Designing Engineers: An Introductory Text, Wiley, 2015.
1. https://www.youtube.com/watch?v=IZKpCz6LEdg
2. https://www.youtube.com/watch?v=QZSY7lnp3zg
3. https://www.youtube.com/watch?v=nh5x_H_lIko
4. https://www.youtube.com/watch?v=2rGaz1C0COU
5. https://www.youtube.com/watch?v=r-BtrSnzwTg
6. https://www.youtube.com/watch?v=OnjX0O9dPMc
7. https://www.youtube.com/watch?v=UeSKdGzXY18
8. https://www.youtube.com/watch?v=EE7_26bq7Tg
9. https://www.youtube.com/watch?v=ktJ5gRkF7og
10. https://www.youtube.com/watch?v=nVhL0cv5a5s
11. https://www.youtube.com/watch?v=9BpBbIk7ElY
12. https://www.youtube.com/watch?v=tKJZxsEeVzk
13. https://www.youtube.com/watch?v=euZkv0wJBiM
14. https://www.youtube.com/watch?v=qyoZTUGzdGY

B.Tech (ME)– III-II Sem L T P C
3 0 0 3
(20A03601) DYNAMICS OF MACHINERY
Course Objectives:
 Analysis of forces acting in mechanisms
 Effects of unbalance forces
 Modelling and analyzing the vibration behaviour of spring mass damper system
 The principles in mechanisms used for governing of machines
Course Outcomes: At the end of the course, the student will be able to
 Determine the forces acting on various linkages when a mechanism is subjected to external forces.
 Identify and correct the unbalances of rotating body
 Analyze the vibratory motion of SDOF systems.
 Reduce the magnitude of vibration and isolate vibration of dynamic systems
 Determine dimensions of Governors for speed control.
UNIT I Friction and Power Screws
Friction: Inclined plane, friction of screws and nuts, pivot and collar, uniform pressure, uniform wear.
Friction circle and friction axis, lubricated surfaces, boundary friction, film lubrication.
Power screws: Forms of threads, self locking of screws, efficiency of different screws, Square,
trapezoidal, screw threads.
UNIT IIPrecession, Turning Moment Diagram and Fly Wheel
Precession: Gyroscopes, effect of precession motion on the stability of moving vehicles such as
motor car, motorcycle, aeroplanes and ships.
Turning Moment Diagrams and Fly Wheels: Turning moment diagrams for steam engine, IC Engine
and multi cylinder engine. Crank effort - coefficient of Fluctuation of energy, coefficient of
Fluctuation of speed – Fly wheels and their design, Fly wheels for Punching machines.
UNIT IIIGovernors
Watt, Porter and Proell governors. Spring loaded governors – Hartnell and Hartung governors with
auxiliary springs. Sensitiveness, isochronism and hunting. Effort and power of a governor.
UNIT IVBalancing
Balancing: Balancing of rotating masses - single and multiple – single and different planes.
Balancing Of Reciprocating Masses: Primary and Secondary balancing of reciprocatingmasses.
Analytical and graphical methods. Unbalanced forces and couples – V-engine, multi cylinder inline
and radial engines for primary and secondary balancing.
UNIT VVibration
Free and forced vibration of single degree of freedom system, Role of damping, whirling of shafts and
critical speeds. Simple problems on free, forced and damped vibrations. Vibration Isolation &
Transmissibility. Transverse vibrations of beams with concentrated and distributed loads. Dunkerly’s
method, Raleigh’s method. Torsional vibrations - two and three rotor systems.
Textbooks:
1. S.S. Rattan, Theory of Machines, MGH Publishers,3/e,2013.
2. R.L. Norton, Kinematics and Dynamics of Machinery, Tata McGraw Hill, 2017.
Reference Books:
1. Thomas Bevan, Theory of machines, Pearson, 3/e,2012.
2. J.E. Shigley, The theory of machines and mechanisms, McGraw hill, 2/e, 1995.
3. R.S.Khurmi, J.K.Guptha, Theory of machines S.Chandpublications, 2005.
 https://archive.org/details/NPTEL-MechEngr-Dynamics_of_Machines
 https://www.youtube.com/watch?v=OlZXxPVpmBs

3 0 0 3
(20A03602) FINITE ELEMENT METHODS
Course Objectives:
 Familiarize basic principles of finite element analysis procedure.
 Explain theory and characteristics of finite elements that represent engineering structures.
 Apply finite element solutions to structural, thermal, dynamic problem.
 Learn to model complex geometry problems and solution techniques.
Course Outcomes:Upon successful completion of this course you should be able to

 Understand the concepts behind variational methods and weighted residual methods in FEM.
 Identify the application and characteristics of FEA elements such as bars, beams, and
isoparametric elements, and 3-D element.
 Develop element characteristic equation procedure and generation of global stiffness equation
will be applied.
 Able to apply Suitable boundary conditions to a global structural equation, and reduce it to a
solvable form.
 Able to identify how the finite element method expands beyond the structural domain, for
problems involving dynamics, heat transfer and fluid flow.
UNIT IIntroduction to finite element methods

Introduction to finite element methods for solving field problems, applications, Stress and
equilibrium, Boundary conditions, Strain-Displacement relations, Stress- strain relations for 2D and
3D Elastic problems. Potential energy and equilibrium, Rayleigh-Ritz method, Formulation of Finite
Element Equations.
One dimensional Problems: Finite element modelling of ID bar elements coordinates and shape
functions. Requirements for Convergence and Interpolation functions, Pascal’s Triangle, Assembly of
global stiffness matrix and load vector. Finite element equations, Treatment of boundary conditions,
Quadratic shape functions.
UNIT II1 D Analysis of Trusses and Beams
Analysis of trusses: Stiffness Matrix for 1D truss element, Stress Calculations and Problems with
maximum of three elements.
Analysis of beams: Element Stiffness Matrix and Load vector for 1 D beam element, Hermite shape
functions and simple problems.
UNIT III2D Analysis
Finite element modeling of two dimensional stress analysis with constant strain triangles and
treatment of boundary conditions. Estimation of load Vector, Stresses.
Finite element modeling of Axi-symmetric solids subjected to axi-symmetric loading with triangular
elements.
UNIT IVQuadrilateral Elements & Thermal Analysis
Quadrilateral Elements: Isoparametric, Sub parametric and Super parametric elements, Modelling
of 4 noded and 8 noded quadrilateral elements and simple problems. Numerical Integration.
Steady state heat transfer analysis: One dimensional analysis of composite slab and fin.
UNITVDynamic analysis
Analysis of a 1D uniform shaft subjected to torsion – Simple problems
Dynamic analysis: Formulation of finite element model, element – mass matrices, evaluation of
Eigen values and Eigen vectors for a bar and shaft.
Textbooks:
1. T. Chandraputla, Ashok Belegundu, Introduction to Finite Element in Engineering, Pearson
Publications, 4/e, 2011.
2. S.S.Rao, The Finite Element Methods in Engineering, Elsevier Butterworth -Heinemann, 2/e, 2011.
3. S.Md.Jalaludeen, Finite Element Analysis in Engineering, 2/e, Anuradha Publications, 2016.
Reference Books:
1. J N Reddy, An introduction to the Finite Element Method, McGraw – Hill, New York, 1993.
2. R D Cook, D S Malkus and M E Plesha, Concepts and Applications of Finite Element
Analysis, 3/e, John Wiley, New York, 1989.
3. K J Bathe, Finite Element Procedures in Engineering Analysis, Prentice-Hall, Englewood
Cliffs, 1982.
4. G.LakshmiNarasaiah, Finite Element Analysis, 1/e, B.S. Publications, 2008.
5. O C Zienkiewicz and R L Taylor, the Finite Element Method, 3/e. McGraw-Hill, 1989.

• https://nptel.ac.in/courses/112/104/112104193/

3 0 0 3
(20A03603) HEAT TRANSFER
Course Objectives:
• To impart the basic laws of conduction, convection and radiation heat transfer and their
applications
• To familiarize the convective heat transfer concepts
• To explain basics of radiation heat transfer
• To make conversant with the heat transfer analysis related to thermal systems like heat
exchangers, evaporator, and condenser.
Course Outcomes:
At the end of the course, the student will be able to
• Apply the concepts of different modes of heat transfer. (L3)
• Apply knowledge of conduction heat transfer in the design of insulation of furnaces and
pipes. (L3)
• Analyse free and forced convection phenomena in external and internal flows. (L4)
• Design of thermal shields using the concepts of black body and non-black body radiation.
(L5)
• Apply the basics of mass transfer for applications in diffusion of gases. (L3)
UNIT I
Introduction
Basic modes of heat transfer- rate equations- generalized heat conduction equation-various forms -
steady state heat conduction solution for plane and composite slabs - cylinders - critical thickness of
insulation- heat conduction through fins of uniform cross section- fin effectiveness and efficiency.
Unsteady State Heat Transfer Conduction- Transient heat conduction- lumped system analysis and
use of Heisler charts.
UNIT II
Convection
Convection: Basic concepts of convection–heat transfer coefficients - types of convection –forced
convection and free convection.
Free Convection: development of hydrodynamic and thermal boundary layer along a vertical plate –
use of empirical relations for convective heat transfer on plates and cylinders in horizontal and
vertical orientation
Forced convection: in external flow–concepts of hydrodynamic and thermal boundary layer- use of
empirical correlations for flow over plates and cylinders. Fluid friction – heat transfer analogy,
approximate solution to laminar boundary layer equation for external flow. Internal flow – Use of
empirical relations for convective heat transfer in horizontal pipe flow-problems.
UNIT III
Boiling and Condensation
Different regimes of boiling- nucleate, transition and film boiling – condensation – film wise and drop
wise condensation-problems.
UNIT IV
Heat Exchangers
Types of heat exchangers- parallel flow- counter flow- cross flow heat exchangers- overall heat
transfer coefficient- LMTD and NTU methods- fouling in heat exchangers-problems.
UNIT V
Radiation: Radiation heat transfer – thermal radiation – laws of radiation - Black and Gray bodies –
shape factor-radiation exchange between surfaces - Radiation shields - Greenhouse effect- simple
problems.
Mass Transfer: Conservation laws and constitutive equations - Fick's law of diffusion, isothermal
equi-mass - Equimolal diffusion- - diffusion of gases and liquids- mass transfer coefficient.
Textbooks:
1. P.K. Nag, Heat Transfer, 3/e, Tata McGraw-Hill, 2011.
2. J.P.Holman, Heat Transfer, 9/e, Tata McGraw-Hill, 2008.
3. S. C. Arora& S. Domkundwar , A Course in Heat and Mass Transfer, Dhan pat Rai & CO.(P)
LTD-Delhi , 2007.
4. R.C.Sachdeva, Fundamentals of Engineering Heat & Mass transfer, New Age International
Publishers, 2017.
Reference Books:
1. F. P. Incropera and D.P. Dewitt, Fundamentals of Heat and Mass Transfer, 6/e, John
Wiley, 2007.
2. Cengel. A.Yunus, Heat Transfer- A Practical Approach, 4/e, Tata McGraw-Hill, 2007.
3. S.P. Sukhatme, A Text book of Heat Transfer, Universities Press, 2005
4. Lienhard and Lienhard, A Heat and Mass Transfer, Cambridge Press, 2011.
5. C.P. Kothandaraman and S. Subramanyan, Heat and Mass Transfer data book, New Age
Publications, 2014.
6. Er.R.K.Rajput, A Text book of Heat & Mass Transfer, S.Chand publishers,1/e,2018.
• https://ocw.mit.edu/courses/mechanical-engineering/2-051-introduction-to-heat-transfer-fall-
2015/
• https://www.udemy.com/topic/heat-transfer/
• https://www.youtube.com/watch?v=TWTQx3W-2k8
• https://onlinecourses.nptel.ac.in/noc20_ch21/preview
• https://ekeeda.com/degree-courses/mechanical-engineering/heat-transfer
• https://www.coursera.org/lecture/thermodynamics-intro/02-04-heat-transfer-gyDfJ
• https://www.youtube.com/watch?v=cjJ2LV5lkB8

3 0 0 3
(20A03604a) NON-DESTRUCTIVE TESTING (NDT)
(Professional Elective – II)
Course Objectives:
 Introduce basic concepts of non-destructive testing.
 Familiarize with characteristics of ultrasonic test, transducers, rejection and effectiveness.
 Describe concept of liquid Penetrant, eddy current and magnetic particle tests, its
applications and limitations.
 Explain the principles of infrared and thermal testing, applications and honey comb and
sandwich structures case studies.
Course Outcomes:
At the end of the course, student will be able to
 Explain various methods of non-destructive testing.
 Apply relevant non-destructive testing method different applications.
 Explain the applications of railways, nuclear and chemical industries.
 Outline the limitations and disadvantages of nde.
 Explain the applications of NDA of pressure vessels, casting and welding constructions
UNIT - I Introduction to non-destructive testing 8 Hrs

Introduction to non-destructive testing: Radiographic test, Sources of X and Gamma Rays
and their interaction with Matter, Radiographic equipment, Radiographic Techniques, Safety
Aspects of Industrial Radiography.
UNIT - II Ultrasonic test 8 Hrs

Ultrasonic test: Principle of Wave Propagation, Reflection, Refraction, Diffraction, Mode
Conversion and Attenuation, Sound Field, Piezo-electric Effect , Ultrasonic Transducers and
their Characteristics, Ultrasonic Equipment and Variables Affecting Ultrasonic Test,
Ultrasonic Testing, Interpretations and Guidelines for Acceptance, Rejection - Effectiveness
and Limitations of Ultrasonic Testing.
UNIT - III Liquid penetrant, Eddy Current & Magnetic 10 Hrs

Particle Test
Liquid Penetrant Test: Liquid Penetrant Test, Basic Concepts, Liquid Penetrant System,
Test Procedure, Effectiveness and Limitations of Liquid Penetrant Testing.
Eddy Current Test: Principle of Eddy Current, Eddy Current Test System, Applications of
Eddy Current-Testing Effectiveness of Eddy Current Testing.
Magnetic Particle Test: Magnetic Materials, Magnetization of Materials, Demagnetization
of Materials, Principle of Magnetic Particle Test, Magnetic Particle Test Equipment,
Magnetic Particle Test Procedure, Standardization and Calibration, Interpretation and
Evaluation, Effective Applications and Limitations of the Magnetic Particle Test.
UNIT - IV Infrared & Thermal Testing 8 Hrs

Infrared And Thermal Testing: Introduction and fundamentals to infrared and thermal
testing–Heat transfer –Active and passive techniques –Lock in and pulse thermography–
Contact and non contact thermal inspection methods–Heat sensitive paints –Heat sensitive
papers –-thermally quenched phosphors liquid crystals –techniques for applying liquid
crystals –other temperature sensitive coatings –Inspection methods –Infrared radiation and
infrared detectors–thermo mechanical behavior of materials–IR imaging in aerospace
applications, electronic components, Honey comb and sandwich structures–Case studies.
UNIT - V Industrial Applications of NDE: 8 Hrs

Industrial Applications of NDE: Span of NDE Activities Railways, Nuclear, Non-nuclear
and Chemical Industries, Aircraft and Aerospace Industries, Automotive Industries, Offshore
Gas and Petroleum Projects, Coal Mining Industry, NDE of pressure vessels, castings,
welded constructions.
Textbooks:
1. J Prasad, GCK Nair ,Non destructive test and evaluation of Materials, Tata mcgraw-
Hill Education Publishers, 2008.
2. Josef Krautkrämer, Herbert Krautkrämer, Ultrasonic testing of materials, 3/e,
Springer-Verlag, 1983.
3. X. P. V. Maldague, Non destructive evaluation of materials by infrared
thermography, 1/e, Springer-Verlag, 1993.
Reference Books:
1. Gary L. Workman, Patrick O. Moore, Doron Kishoni, Non-destructive, Hand Book,
Ultrasonic Testing, 3/e, Amer Society for Nondestructive, 2007.
2. ASTM Standards, Vol 3.01, Metals and alloys.

 http://www.twivirtualacademy.com/online-courses/ndt/
 https://www.classcentral.com/course/swayam-theory-and-practice-of-non-destructive-
testing-9872
 https://onlinecourses.nptel.ac.in/noc20_mm07/preview
 https://www.youtube.com/watch?v=dyMR58TZMbo
 https://www.youtube.com/watch?v=Wam-Ewcn3aQ
 https://www.iare.ac.in/sites/default/files/lecture_notes/IARE_NDT_LECTURE_NOTES.pdf
 https://lecturenotes.in/subject/390/non-destructive-testing

3 0 0 3
(20A03604b) PRODUCTION AND OPERATIONS MANAGEMENT
Course Objectives:
At the end of the course, the student will be able to learn
 Introduction to the technical design and manufacturing operations and supply management to
the sustainability of an enterprise.
 Need for forecasting and types of forecasting.
 Import the basic principles of project management and other business functions such as value
engineering, purchasing, marketing, finance etc.
 Analyze the new demands of the globally competitive business environment that supply
chain managers face today.
 Knowledge on various scheduling algorithms applicable to single machine, parallel
machines, flow shop and job shop models.
Course Outcomes:
 Demonstrate the operations and supply management to the sustainability of an enterprise
 Identify the need for forecasting and understand different forecasting methods
 Identify various production and plant layouts
 Examine the quality control of the production
 Apply Just in Time (JIT) basic principles and applications
 Recommend the production schedule for productivity
 Design, analyze and implement single machine, parallel machine, flow shop and job shop
scheduling algorithms
UNIT - I Introduction 10 Hours
Introduction: Operations Management – Definition, Objectives, Types of Production
System, Difference between OM & PM, Historical Development of Operations
Management, Current Issues in Operation Management, Product Design – Requirements of
Good Product Design, Product Development – Approaches, Concepts in Product
Development, Standardization, Simplification, Speed to Market, Introduction to Concurrent
Engineering.
UNIT - II Forecasting: 8 Hours
Forecasting: Introduction, Statistical Forecasting Techniques, Moving Average,
Exponential Smoothing Technique, Errors in Forecasting and Evaluation of Forecasting
Techniques.
UNIT - III Value Engineering and Plant Layout: 8 Hours
Value Engineering and Plant Layout: Value Engineering – Objectives, Types of Values,
Function and Cost, Product Life Cycle, Steps in Value Engineering, Methodology in Value
Engineering, FAST Diagramand Matrix Method. Facility Location and Layout – Factor
Considerations in Plant Location, Comparative Study of Rural and Urban Sites, Methods of
Selection of Plant Layout, Objectives of Good layout, Principles, Types of Layout, Line
Balancing
UNIT - IV Aggregate Planning and MRP: 8 Hours
Aggregate Planning and MRP: Aggregate Planning – Definition, Different Strategies,
Various Models of Aggregate Planning- Transportation and Graphical Models, Master
scheduling, Material Requirement Planning(MRP)- Terminology, Types of Demands, Inputs
to MRP, Techniques of MRP, Lot Sizing Methods, Benefits and Drawbacks of MRP,
Manufacturing Resources Planning (MRP II), Just in Time (JIT) Philosophy, Kanban
System, Calculation of Number of Kanbans, Pull Systems vs. Push Systems, Requirements
for Implementation of JIT, JIT Production Process, Benefits of JIT.
UNIT - V Scheduling: 8 Hours
Scheduling: Policies, Types of Scheduling, Scheduling Strategies, Scheduling and Loading
Guidelines, Forward and Backward Scheduling, Grant Charts, Priority Decision Rules, Flow
Shop Scheduling, Job Shop Scheduling, Line of Balance.
Textbooks:
1. Buffa E.S. and Sarin R.K., Modern Production / Operations Management, 8 th Edition, Wiley
India Pvt. Ltd., New Delhi, 2009.
2. Joseph G. Monks, Operations Management-Theory and Problems, 3rd Edition, McGraw Hill
Education, 1987.
Reference Books:
1. James L. Riggs, Jim Rigs, Production Systems: Planning, Analysis and Control, 4 th Edition,
Wave Land Press, 1992.
2. Chary S.N., Production and Operations Management, 5th Edition, McGraw Hill Education,
2017.
3. Richard B.Chase, Ravi Shankar, Robert Jacobs F., Operations and Supply Chain
Management, 15th Edition, McGraw Hill Education, 2018.
4. Pannerselvam R., Production and Operations Management, 3 rd Edition, PHI Learning Pvt.
Ltd., New Delhi, 2012.
5. Steven Nahmias, Tava Lennon Olsen, Production and Operation Analysis: Strategy – Quality
– Analytics – Applications, 7th Edition, Waveland Press Inc., 2015.
 https://lecturenotes.in/subject/100/production-and-operation-management
 https://www.studocu.com/in/document/guru-gobind-singh-indraprastha-
university/production-operations-management/full-unit-1-lecture-notes-6/3528988
 https://mrcet.com/downloads/digital_notes/ME/III%20year/POM%20NOTES.pdf
 https://www.iare.ac.in/sites/default/files/lecture_notes/IARE_OM_NOTES.pdf

3 0 0 3
(20A03604c) TOTAL QUALITY MANAGEMENT (TQM)
Course Objectives:
● Introduce the students, the basic concepts of Total Quality Management.
● Expose with various quality issues in Inspection.
● Gain Knowledge on quality control and its applications to real time.
● Know the extent of customer satisfaction by the application of various quality
concepts.
● Understand the importance of Quality standards in Production.
Course Outcomes (CO):

At the end of this course, the student will be able to
● Develop an understanding on quality Management philosophies and frameworks
● Adopt TQM methodologies for continuous improvement of quality
● Measure the cost of poor quality, process effectiveness and efficiency to identify
areas for improvement
● Apply benchmarking and business process reengineering to improve management
processes.
● Determine the set of indications to evaluate performance excellence of an
organization.
UNIT - I Introduction Lecture Hrs: 10
Introduction: Definition of Quality, Dimensions of Quality, Definition of Total quality
management, Quality Planning, Quality costs – Analysis, Techniques for Quality costs,
Basic concepts of Total Quality Management.
UNIT - II Historical Review: Lecture Hrs: 9

Historical Review: Quality council, Quality statements, Strategic Planning, Deming
Philosophy, Barriers of TQM Implementation, Benefits of TQM, Characteristics of
successful quality leader, Contributions of Gurus of TQM, Case studies.
UNIT - III TQM Principles: Lecture Hrs:8
TQM Principles: Customer Satisfaction – Customer Perception of Quality, Customer
Complaints, Service Quality, Customer Retention, Employee Involvement – Motivation,
Empowerment teams, Continuous Process Improvement – Juran Trilogy, PDSA Cycle,
Kaizen, Supplier Partnership – Partnering, sourcing, Supplier Selection, Supplier Rating,
Relationship Development, Performance Measures – Basic Concepts, Strategy, Performance
Measure Case studies.
UNIT - IV TQM Tools: Lecture Hrs:9
TQM Tools: Benchmarking – Reasons to Benchmark, Benchmarking Process, Quality
Function Deployment (QFD) – House of Quality, QFD Process, Benefits, Taguchi Quality
Loss Function, Total Productive Maintenance (TPM) – Concept, Improvement Needs,
FMEA – Stages of FMEA, The seven tools of quality, Process capability, Concept of Six
Sigma, New Seven management tools, Case studies.
UNIT - V Quality Systems: Lecture Hrs:8

Quality Systems: Need for ISO 9000 and Other Quality Systems, ISO 9000: 2000 Quality
System – Elements, Implementation of Quality System, Documentation, Quality Auditing,
QS 9000, ISO 14000 – Concept, Requirements and Benefits, Case Studies.
Text Books:
1. Dale H Besterfield, Total Quality Management, Fourth Edition, Pearson Education,
2015.
2. Subburaj Ramaswamy, Total Quality Management, Tata Mcgraw Hill Publishing
Company Ltd., 2005.
3. Joel E.Ross , Total Quality Management, Third Eition, CRC Press, 2017.
Reference Books:
1. Narayana V and Sreenivasan N.S, Quality Management – Concepts and Tasks, New
Age International, 1996.
2. Robert L.Flood, Beyond TQM, First Edition, John Wiley & Sons Ltd, 1993.
3. Richard S. Leavenworth & Eugene Lodewick Grant, Statistical Quality Control,
Seventh Edition, Tata Mcgraw Hill, 2015
4. Samuel Ho , TQM – An Integrated Approach, Kogan Page Ltd, USA, 1995.
 https://www.youtube.com/watch?v=VD6tXadibk0
 https://www.investopedia.com/terms/t/total-quality-management-tqm.asp
 https://blog.capterra.com/what-is-total-quality-management/
 https://onlinecourses.nptel.ac.in/noc21_mg03/preview
 https://nptel.ac.in/noc/courses/noc18/SEM2/noc18-mg39/

0 0 3 1.5
(20A03606) COMPUTER AIDED DESIGN LABORATORY
Course Objectives:
 To use the commercial Finite Element packages to build Finite Element models and solve a
selected range of engineering problems.
 To validate a Finite Element model using a range of techniques.
 To communicate effectively in writing to report (both textually and graphically) the method
used, the implementation and the numerical results obtained.
 To discuss the accuracy of the Finite Element solutions.
Course Outcomes
 Ability to solve engineering problems using the commercial software’s such as ANSYS,
SIMUFACT, ABAQUS, SIMULIA, Mathematical, MAT LAB, GNU Octave, Scilab,
MAPLE/ COMSOL.
Finite Element Analysis using Simulation package for different structures. The discretization can be
done with 1-D, 2-D & 3-D elements to perform the following analysis for post processing:
1. Static Analysis
a. Stress analysis of 2D truss.
b. Stress analysis of a plate with a circular hole and L-Bracket – 2D and 3D
c. Stress analysis of beams (cantilever, simply supported & fixed ends)
d. Stress analysis of an axi-symmetric component
e. Torsion based Problem
2. Thermal Analysis
a. Conductive heat transfer analysis of a 2D and 3D components
b. Conduction and Convective heat transfer analysis of a 2D component
c. Heat transfer rate of a composite wall
d. Coupled field analysis of a component
3. Modal Analysis
a. Mode frequency analysis of a 2D component
b. Mode frequency analysis of beams (cantilever, simply supported)
Note: Students should practice the above problems with combinations of ANSYS, Octave,
Scilab, MATLAB/ Mathematica, MAPLE/COMSOLetc. based on the available software’s of
either licensed or freeware. Staff can make use of Freeware in solving the FEA Problems with
different combination of simulation packages.
References:
1. Nitin S Gokhale and Sanjay Deshpande, Practical Finite Element Analysis, Finite to Infinite
Publishers, 1/e, 2008.
2. Joe Stefanelli, Finite Element Analysis in Practice-Instructor Manual, Auto-desk, 2010.
3. J.M. Ferreira, MATLAB codes for Finite Element Method”, Springer Publications, 2020.
4. Heinrich, Juan C., Pepper, Darrell W, The finite element method: basic concepts and
applications with MATLAB, MAPLE, and COMSOL:,CRC Press, 3/e, 2017.
 https://www.youtube.com/watch?v=1gamqpyZjTg
 https://www.youtube.com/watch?v=4c-sPXolD0w
 https://www.youtube.com/watch?v=XSYRnEfPMqA
 https://au.mathworks.com/discovery/finite-element-analysis.html
 https://w3.pppl.gov/m3d/reference/fsem_intro.pdf
 https://www.youtube.com/watch?v=WXKUCky9CtA&list=PL3YYYtsmbXgdRoY27y3ZEjF
5qE7YYeX_I
 https://www.youtube.com/watch?v=n3FDQqrRJqA
• https://www.youtube.com/watch?v=oHYVzAih_VM

0 0 3 1.5
(20A03607) COMPUTER AIDED MANUFACTURING LABORATORY
Course Objectives:
 To get practical knowledge on manual part programming of CNC lathe machine by using G
codes and M codes.
 To get practical knowledge on manual part programming of CNC milling and drilling
machine by using G codes and M codes.
 To get the practical knowledge on APT language.
 To get practical application of Industrial Robots
Course Outcomes:Upon successful completion students should be able to:
 Use and understanding of Preparatory and Miscellaneous (G& M) codes to generate or edit a
program which will operate a CNC Lathe/ Milling and Drilling.
 Apply mathematical methods to calculate World/ Joint/ Tool coordinates in robotics.
 Apply the programming concepts of Robots for simple applications in material handling and
assembly
1. Manual part programming (using G and M codes) in CNC Lathe Machine:
a. Part programming for linear interpolation, circular interpolation, chamfering and grooving.
b. Part programming by using standard Canned cycles for facing, turning, taper turning and
thread cutting, Chess Bishop profile
c. Multiple turning operations which cover all lathe operations covering maximum G codes
and M codes
2. Manual part programming (using G and M codes) in CNC Milling Machine:
a. Part programming for linear interpolation, circular interpolation and contour motions.
b. Part programming involving Canned cycles for drilling, Peck drilling and boring and
pocketing & Mirroring.
c. Part programming for Gear cutting profile
3. APT (Automatically Programmed Tools) Language-Cutting tool path generation by using any
CAM simulation package / Experiment for different machining operations.
a. APT Lathe Programming’s – 2 Experiments
b. APT Milling Programming’s - 2 Experiments
4. Robotics: By using 5 or 6 – Axis robot
a. Pick and Place with palletizing/ de-palletizing of components
b. Nut, Bolt and Washer Assembly with robot.
References:
1. P Radhakrishnan, Computer Numerical Control (CNC) Machines, New Central Book
agency, 2013.
2. S.R.DEB, Robotics Technology and Flexible Automation, McGraw Hill Education, 2017.
3. CHAO- HWA CHANG and MICHEL. A. MELKANOFF, NC Machine Programming and
software Design, Prentice Hall Publishers, 1989.
 https://www.youtube.com/watch?v=NCEHRvFQqMo
 https://www.youtube.com/watch?v=Gwy_Vh46fCM
 https://www.youtube.com/watch?v=0sxLwytzT2Y
 https://www.youtube.com/watch?v=rgZT3RtfUqA
 https://www.youtube.com/watch?v=osqX7iQEnuI
 https://www.youtube.com/watch?v=-F0i1LDk2XI
 https://www.youtube.com/watch?v=i-PgeWbDgq4
 https://www.youtube.com/watch?v=sJm1Nyb-AkE
 https://www.youtube.com/watch?v=UxO0xqvvGcM
 https://www.youtube.com/watch?v=Ic-iKGSc7dk

0 0 3 1.5
(20A03603P) HEAT TRANSFER LAB
Course Objectives:
Students undergoing this course would
● Understand different modes of heat transfer
● Gain knowledge about natural and force convection phenomenon
● Estimate experimental uncertainty in measurements
Course Outcomes:
Upon the successful completion of course, students will be able to
● Explain different modes of heat transfer
● Identify parameters for measurement for calculating heat transfer
● Determine effectiveness of heat exchanger
● Design new equipment related to heat transfer
● Apply principles of heat transfer in wide application in industries.
1. Determine the overall heat transfer coefficient across the width of composite wall
2. Determine the thermal conductivity of a metal rod
3. Determine the thermal conductivity of insulating powder material through concentric sphere
apparatus
4. Determine the thermal conductivity of insulating material through lagged pipe apparatus
5. Determine the efficiency of a pin fin in natural and forced convection.
6. Determine the heat transfer coefficient for a vertical cylinder in natural convection
7. Determine the heat transfer coefficient in forced convection of air in a horizontal tube.
8. Determine the heat transfer coefficients on film and drop wise condensation apparatus.
9. Determine the effectiveness of a parallel and counter flow heat exchanger.
10. Study the pool boiling phenomenon and different regimes of pool boiling.
11. Experiment on pool boiling
12. Determine the emissivity of the test plate surface.
13. Experiment on Stefan-Boltzmann apparatus
14. Determine the heat transfer rate coefficient in fluidized bed apparatus.
Virtual Lab:-
1. Determination of thermal conductivity of a metal rod
https://sites.google.com/view/vlab-bnmitmech/home/heat-transfer-lab/determination-of-
thermal-conductivity-of-a-metal-rod
2. Natural Convection heat transfer
https://sites.google.com/view/vlab-bnmitmech/home/heat-transfer-lab/natural-convection
3. Heat Transfer by Radiation
https://vlab.amrita.edu/index.php?sub=1&brch=194&sim=802&cnt=1
4. Heat transfer by Conduction
5. The Study of phase change
6. Black Body Radiation: Determination of Stefan's Constant
7. Newton's Law of Cooling
8. Lee's Disc Apparatus
9. Thermo Couple-See beck Effect
10. https://vlab.amrita.edu/index.php?sub=1&brch=194&sim=351&cnt=1
References:
1. Abdul Matheen, Heat Transfer Laboratory Manual, Laxmi Publications; 2/e, 2007.
 https://sites.google.com/view/vlab-bnmitmech/home/heat-transfer-lab
 https://www.iare.ac.in/sites/default/files/lab1/IARE_HT_LAB_MANUAL.pdf
 https://mrcet.com/downloads/digital_notes/ME/III%20year/(R18A0388)Heat%20Transfer%2
0Lab.pdf
 https://mrcet.com/downloads/ME/Mech%20III-II.pdf

1 0 2 2
(20A03608) 3D PRINTING PRACTICE
(Skill Oriented Course-IV)
Course Objectives:
Students undergoing this course would
 Understand different methods of 3D Printing.
 Gain knowledge about simulation of FDM process
 Estimate time and material required for manufacturing a 3D component
Course Outcomes:
Upon the successful completion of course, students will be able to
 Explain different types of 3d Printing techniques
 Identify parameters for powder binding and jetting process
 Determine effective use of ABS material for 3D Printing
 Apply principles of mathematics to evaluate the volume of material require.
Module 1:
Introduction to Prototyping, Working of 3D Printer, Types of 3D printing Machines:
Exp 1: Modelling of Engineering component and conversion of STL format.
Exp 2: Slicing of STL file and study of effect of process parameter like layer thickness,
orientation, and infill on build time using software.
Exercise 1 : Component-1
Exercise 2 : Component-2
Module 2:
Exp 1 : 3D Printing of modelled component by varying layer thickness.
Exp 2 : 3D Printing of modelled component by varying orientation.
Exp 3: 3D Printing of modelled component by varying infill.
Module 3:
Study on effect of different materials like ABS, PLA, Resin etc, and dimensional accuracy.
Module 4:
Identifying the defects in 3D Printed components.
Module 5
Exp1: Modelling of component using 3D Scanner of real life object of unknown dimension
in reverse engineering.
Exp 2: 3D Printing of above modelled component.
References:
1. Ian Gibson, David W. Rosen, Brent Stucker, Additive Manufacturing Technologies: Rapid
Prototyping to Direct Digital Manufacturing, 1/e, Springer, 2010.
2. Chua C.K., Leong K.F. and Lim C.S., Rapid Prototyping: Principles and Applications, 2/e,
World Scientific Publishers, 2003.
 https://www.hubs.com/knowledge-base/introduction-fdm-3d-printing/
 https://slideplayer.com/slide/6927137/
 https://www.mdpi.com/2073-4360/12/6/1334
 https://www.centropiaggio.unipi.it/sites/default/files/course/material/2013-11-29%20-
%20FDM.pdf
 https://lecturenotes.in/subject/197
 https://www.cet.edu.in/noticefiles/258_Lecture%20Notes%20on%20RP-ilovepdf-
compressed.pdf
 https://www.youtube.com/watch?v=NkC8TNts4B4

2 0 0 0
(20A99601) INTELLECTUAL PROPERTY RIGHTS AND PATENTS

(Mandatory Non-Credit Course)
Course Objectives:
This course introduces the student to the basics of Intellectual Property Rights, Copy Right Laws,
Cyber Laws, Trade Marks and Issues related to Patents. The overall idea of the course is to help and
encourage the student for startups and innovations
Course Outcomes:
 Understand IPR law & Cyber law
 Discuss registration process, maintenance and litigations associated with trademarks
 Illustrate the copy right law
 Enumerate the trade secret law.
UNIT I
Introduction to Intellectual Property Law – Evolutionary past – Intellectual Property Law Basics –
Types of Intellectual Property – Innovations and Inventions of Trade related Intellectual Property
Rights – Agencies Responsible for Intellectual Property Registration – Infringement – Regulatory –
Overuse or Misuse of Intellectual Property Rights – Compliance and Liability Issues.
UNIT II
Introduction to Copyrights – Principles of Copyright – Subject Matters of Copyright – Rights
Afforded by Copyright Law –Copyright Ownership – Transfer and Duration – Right to Prepare
Derivative Works –Rights of Distribution – Rights of performers – Copyright Formalities and
Registration – Limitations – Infringement of Copyright – International Copyright Law-Semiconductor
Chip Protection Act.
UNIT III
Introduction to Patent Law – Rights and Limitations – Rights under Patent Law – Patent
Requirements – Ownership and Transfer – Patent Application Process and Granting of Patent – Patent
Infringement and Litigation – International Patent Law – Double Patenting – Patent Searching –
Patent Cooperation Treaty – New developments in Patent Law- Invention Developers and Promoters.
UNIT IV
Introduction to Trade Mark – Trade Mark Registration Process – Post registration procedures – Trade
Mark maintenance – Transfer of rights – Inter parties Proceedings – Infringement – Dilution of
Ownership of Trade Mark – Likelihood of confusion – Trade Mark claims – Trade Marks Litigation –
International Trade Mark Law.
UNIT V
Introduction to Trade Secrets – Maintaining Trade Secret – Physical Security – Employee Access
Limitation – Employee Confidentiality Agreement – Trade Secret Law – Unfair Competition – Trade
Secret Litigation – Breach of Contract – Applying State Law. Introduction to Cyber Law –
Information Technology Act – Cyber Crime and E-commerce – Data Security – Confidentiality –
Privacy – International aspects of Computer and Online Crime.
Textbooks:
1. Deborah E.Bouchoux: “Intellectual Property”. Cengage learning, New Delhi
2. Kompal Bansal &Parishit Bansal “Fundamentals of IPR for Engineers”, BS Publications (Press)
3. Cyber Law. Texts & Cases, South-Western’s Special Topics Collections
References:
1. Prabhuddha Ganguli: ‘ Intellectual Property Rights” Tata Mc-Graw – Hill, New Delhi
2. Richard Stim: “Intellectual Property”, Cengage Learning, New Delhi.
3. R. Radha Krishnan, S. Balasubramanian: “Intellectual Property Rights”, Excel Books. New Delhi.
4. M. Ashok Kumar and Mohd. Iqbal Ali: “Intellectual Property Right” Serials Pub.

B.Tech (ME)– IV-I Sem L T P C
3 0 0 3
(20A03701a) MODERN MANUFACTURING METHODS
(Professional Elective-III)
Course Objectives:
 Define various Modern Machining Processes.
 Acquire knowledge in the elementary mechanism and machinability of materials with
different Modern Machining Processes.
 Determine basic principles of operation for each process and their applications.
 State various parameters influencing MRR in Non – Traditional Machining Process.
 Classify and understand the working of Additive Manufacturing Processes.
 Illustrate advanced machining processes, cutting tools and cutting fluids for a specific
material and part features.
 Classify the mechanism of Mechanical Energy based machining processes, its applications
and limitations.
 Differentiate Electrical Energy Based machining processes, mechanism of metal removal,
machine tool selection.
 Interpret Electro Chemical machining process, economic aspects of ECM and problems on
estimation of metal removal rate.
UNIT I
Non – Traditional Machining Processes: Introduction, Need, Classification and Brief Overview,
Considerations in Process selection, Materials, Applications.
Mechanical Energy Based Processes: Abrasive Jet Machining, Water Jet Machining, Abrasive
Water Jet Machining, Ultra Sonic Machining – Working Principle, Description of Equipment, Process
Parameters, Metal Removal Rate, Applications, Advantages and Limitations.
UNIT II
Electrical Energy Based Processes:Electric Discharge Machining – Working Principles, Description
of Equipment, Process Parameters, Surface Finish and MRR, Electrode / Tool, Power and Control
Circuits, Tool Wear, Dielectric Fluid, Flushing, Advantages, Limitations and Applications. Wire cut
EDM – Working Principle and Applications.
UNIT III
Chemical and Electro Chemical Energy Based Processes:Chemical Machining and Electro
Chemical Machining – Working Principle, Description of Equipment, Etchants, Maskants,
Techniques of Applying Maskants, Process Parameters, Surface Finish and MRR, Electro Chemical
Grinding, Electro Chemical Honing, Applications, Advantages and Limitations.
UNIT IV
Thermal Energy Based Processes: Laser Beam Machining and Drilling, Plasma Arc Machining,
Electron Beam Machining – Working Principle, Description of Equipment, Process Parameters,
Applications, Advantages and Limitations.
UNIT V
Additive Manufacturing: Introduction to Additive Manufacturing, Classification of Additive
Manufacturing Processes, Working Principle, Advantages, Limitations and Applications of
Sterolithography (SLA), Fused Deposition Modeling, Selective Laser Sintering, Laminated Object
Manufacturing
Textbooks:
1. Jain V.K., Advanced Machining Processes, 1st Edition, Allied Publishers Pvt. Ltd., New Delhi,
2007.
2. Pandey P.C and Shan H.S., Modern Machining Processes, 1/e, McGraw Hill, New Delhi, 2007.
3. Ian Gibson, David W. Rosen, Brent Stucker, Additive Manufacturing Technologies: Rapid
Prototyping to Direct Digital Manufacturing, 1/e, Springer, 2010.
Reference Books:
1. Chua C.K., Leong K.F. and Lim C.S., Rapid Prototyping: Principles and Applications, 2/e,
World Scientific Publishers, 2003.
2. Benedict G.F., Nontraditional Manufacturing Processes, 1/e, CRC Press, 1987.
3. Mishra P.K., Nonconventional Manufacturing, 1/e, Narosa Publishing House, New Delhi,
2014.
4. McGeough J.A., Advanced Methods of Machining, 1/e, Springer, 1988.
 https://youtu.be/t3y_Ys3LgGM
 https://www.youtube.com/watch?v=E4VZ_rFqpG4&t=1s
 https://youtu.be/-tcaR7oSx_w
 https://youtu.be/Uybg6VDLoRQ
 https://youtu.be/Uybg6VDLoRQ
 https://youtu.be/aWQsEX1TrSI

3 0 0 3
(20A03701b) DESIGN FOR MANUFACTURING
Course Objectives:
 Explain the product development cycle and manufacturing issues to be considered in design.
 Familiarize manufacturing consideration in cast, forged, and weld components.
 Describe the manufacture of sheet metal components.
 Impart knowledge plastics as substitution to metallic parts.
Course Outcomes:After successful completion of the course, the student will be able to
 Design mechanical components with economical consideration
 Select materials and machining processes
 Identify the necessity for redesigning components out of manufacturing considerations
 Consider the manufacturing considerations while designing cast, forged weld and sheet
metal components
 Design plastic parts with manufacturing considerations
UNIT IIntroduction
Introduction: Design philosophy-steps in design process-general design rules for manufacturability-
basic principles of designing for economical production-creativity in design.
Materials: Selection of materials for design-developments in material technology-criteria for material
selection-material selection interrelationship with process selection-process selection charts.
UNIT IIMachining processes
Overview of various machining processes-general design rules for machining-dimensional tolerance
and surface roughness-Design for machining – ease –redesigning of components for machining ease
with suitable examples. General design recommendations for machined parts.
UNIT IIIMetal Casting and Joining
Metal casting: Appraisal of various casting processes, selection of casting process,-general design
considerations for casting-casting tolerance-use of solidification, simulation in casting design-product
design rules for sand casting.
Metal joining: Appraisal of various welding processes, factors in design of weldments – general
design guidelines-pre and post treatment of welds-effects of thermal stresses in weld joints-design of
brazed joints.
UNIT IVForging, Extrusion & Sheet metal work
Forging: Design factors for forging – closed die forging design – parting lines of dies – drop forging
die design – general design recommendations.
Extrusion & Sheet metal work: Design guide lines extruded sections-design principles for punching,
blanking, bending, deep drawing-Keeler Goodman forging line diagram – component design for
blanking.
UNIT VPlastics
Visco elastic and creep behavior in plastics-design guidelines for plastic components-design
considerations for injection moulding – design guidelines for machining and joining of plastics.
Textbooks:
1. George E Dieter and Linda Schmidt, Engineering Design, 4/e, McGraw Hill, 2015.
2. A.K.Chitale and R.C.Gupta, Product Design and Manufacturing, 5/e, PHI Learning 2011.
3. David M Anderson, Design for Manufacturability, CRC Press, 2013.
Reference Books:
1. James G Bralla, Design For Manufacturability Handbook, 2/e, McGraw Hill, 2004.
2. Dr.P.C.Sharma, Production Technology, S.Chand& Company, 2009.
3. G. Boothroyd, Product Design for Manufacture & Assembly, CRC Press, 3/e, 2010.

 https://www.iare.ac.in/sites/default/files/lecture_notes/DFMA_LECTURE_NOTES.pdf
 https://ocw.mit.edu/courses/mechanical-engineering/2-008-design-and-manufacturing-ii-
spring-2004/lecture-notes/
 https://dokumen.tips/documents/design-for-manufacturing-and-assembly-1-lecture-notes-on-
design-for-manufacturing.html
 https://www.youtube.com/watch?v=ofmbhbVCUqI

3 0 0 3
(20A03701c) OPERATIONS RESEARCH
Course Objectives:
● To impart the basic concepts of modelling, models and statements of the operations research.
● Formulate and solve linear programming problem/situations.
● Model strategic behaviour in different economic situations.
● To solve transportation problems to minimize cost.
● Apply Queuing theory to solve problems of traffic congestion, counters in banks, railway
bookings etc.
● Explain scheduling and sequencing of production runs and develop proper replacement
policies.
● Develop mathematical models for practical problems. (L3)
● Apply linear programming to transportation problems. (L3)
● Solve games using various techniques. (L3)
● Solve production scheduling and develop inventory policies. (L6)
● Apply optimality conditions for constrained and unconstrained nonlinear problems. (L3)
● Apply dynamic programming methods. (L3)
UNIT IIntroduction to OR
Introduction to Operations Research (OR): OR definition - Classification of Models, modeling –
Methods of solving OR Models, limitations and applications of OR models
Linear Programming(LP): Problem Formulation, Graphical Method, Simplex Method, Big-M
Method, Two–Phase Simplex Method, Special Cases of LP- Degeneracy, Infeasibility and Multiple
Optimal Solutions; Concept of dual theorem
UNIT – IITransportation and Assignment Problems
Transportation Problem – Formulation; Different Methods of Obtaining Initial Basic Feasible Solution
–North West Corner Rule, Least Cost Method, Vogel's Approximation Method; Optimality Method –
Modified Distribution (MODI) Method; Special Cases – Unbalanced Transportation Problem,
Degenerate Problem. Assignment Problem – Formulation, Hungarian Method for Solving Assignment
Problems, Traveling Salesman problem.
UNIT – IIIGame theory & Job Sequencing
Game theory: Optimal solution of two person zero sum games, the max min and min max principle.
Games without saddle points, mixed strategies. Reduction by principles of dominance, arithmetic,
algebraic method and graphical method.
Job Sequencing: Introduction to Job shop Scheduling and flow shop scheduling, Solution of Job
Sequencing Problem, Processing of n Jobs through two machines, Processing of n Jobs through m
machines, graphical method.
UNIT – IVQueuing Theory & Inventory Control
Queuing Theory: Introduction – Terminology, Arrival Pattern, Service Channel, Population,
Departure Pattern, Queue Discipline, Birth & Death Process, Single Channel Models with Poisson
Arrivals, Exponential Service Times with infinite and finite queue length; Multichannel Models with
Poisson Arrivals, Exponential Service Times with infinite queue length.
Inventory Control: Introduction, Deterministic models – EOQ model with and without shortages,
Production model, Buffer stock and discount inventory models with single price breaks. Selective
inventory control.
UNIT – VReplacement and Maintenance Analysis & DP
Replacement and Maintenance Analysis: Introduction – Types of Maintenance, Make or buy
decision. Types of Replacement Problems, Determination of Economic Life of an Asset, and Simple
Probabilistic Model for Items which completely fail-Individual Replacement Model, Group
Replacement Model. Dynamic Programming (DP): Introduction –Bellman’s Principle of Optimality
– Applications of Dynamic Programming – Shortest Path Problem – Capital Budgeting Problem –
Solution of Linear Programming Problem by DP.
Textbooks:
1. Sharma S.D., Operations Research: Theory, Methods and Applications, 15/e, Kedar Nath Ram
Nath, 2010
2. Taha H.A., Operations Research, 9/e, Prentice Hall of India, New Delhi, 2010.
Reference Books:
1. Hiller F.S., and Liberman G.J., Introduction to Operations Research, 7/e, Tata McGraw Hill,
2010.
2. Sharma J.K., Operations Research: Theory and Applications, 4/e, Laxmi Publications, 2009.
3. Prem kumar Gupta and Hira, Operations Research, 3/e, S Chand Company Ltd., New Delhi,
2003.
4. Pannerselvam R., Operations Research, 2/e, Pentice Hall of India, New Delhi, 2006.
5. Sundaresan.V, and Ganapathy Subramanian.K.S, Resource Management Techniques:
Operations Research, A.R Publications, 2015.

● http://www2.informs.org/Resources/
● http://www.mit.edu/~orc/
● http://www.ieor.columbia.edu/
● http://www.universalteacherpublications.com/univ/ebooks/or/Ch1/origin.htm
 http://www.wolfram.com/solutions/OperationsResearch/

3 0 0 3
(20A03702a) AUTOMOBILE ENGINEERING
(Professional Elective-IV)
Course Objectives:
● Impart the knowledge of vehicle structure and its components.
● Demonstrate various components of petrol engines and diesel engines.
● Trains about the various electrical system, circuits, and testing of automobiles.
 Explain the concepts of steering, suspension and braking system in automobile.
Course Outcomes:After successful completion of this course, the student will be able to
● Identify different parts of automobile
● Explain the working of various parts like engine and brakes
● Describe the working of steering and the suspension systems.
● Summarize the wheels and tires
● Outline the future developments in the automobile industry
UNIT IIntroduction to vehicle structure and engine components

Vehicle construction - Chassis and body - Specifications - Engine - Types - Construction - Location
of engine - Cylinder arrangement - Construction details - Cylinder block - Cylinder head - Cylinder
liners - Piston – piston rings - Piston pin - Connecting rod - Crankshaft - Valves. Lubrication system -
Types - Oil pumps - Filters. Crankcase ventilation.
UNIT IIIgnition and fuel supply systems
Ignition system - Coil and Magneto - Spark plug - Distributor – Electronic ignition system - Fuel
system - Carburetor - Fuel pumps - Fuel injection systems - Mono point and Multi point – Unit
Injector – Nozzle types - Electronic Fuel Injection system (EFI) – GDI, MPFI, DTSI.
UNIT – IIISteering and suspension system
Principle of steering - Steering Geometry and wheel alignment - Steering linkages – Steering
gearboxes - Power steering - front axle - Suspension system - Independent and Solid axle – coil, leaf
spring and air suspensions - torsion bar - shock absorbers.
UNIT – IVWheels, Tyres and Braking System
Wheels and Tyres - Construction - Type and specification - Tyre wear and causes - Brakes - Needs –
Classification –Drum and Disc Mechanical - Hydraulic and pneumatic - Vacuum assist – Retarders –
Anti-lock Braking System(ABS).
UNIT – VAutomobile electrical systems and advances in automobile engineering
Battery-General electrical circuits- Active Suspension System (ASS) - Electronic Brake Distribution
(EBD) – Electronic Stability Program(ESP), Traction Control System (TCS) - Global Positioning
System (GPS), Hybrid vehicle, Fuel Cell.
Textbooks:
1. Kirpal Singh, Automobile Engineering, Vol.1&2, Standard Publications, 13/e, 2020.
2. William.H.Crouse, Automotive Mechanics, 10/e , McGraw-Hill, 2006.
3. David A. Corolla, Automotive Engineering: Powertrain, Chassis System and Vehicle Body,
Butterworth-Heinemann Publishing Ltd, 2009.
4. Richard Stone, Jeffrey K. Ball, Automotive Engineering Fundamentals" SAE International,
2004.
Reference Books:
1. Bosch, Automotive Hand Book, 6/e, SAE Publications, 2007.
2. K. Newton and W. Steeds, The motor vehicle, 13/e, Butterworth-Heinemann Publishing Ltd,
1989.
3. Joseph Heitner, Automotive Mechanics Principles and Practices, 2/e, CBS publishing 2004.

 https://hindustanuniv.ac.in/assets/pdf/ug/CBCS/cbcs-automobile-2018.pdf
 https://ed.iitm.ac.in/~shankarram/Course_Files/ED5160/ED5160.htm
 https://dbatu.ac.in/wp-content/uploads/2020/07/B-Tech-Automobile_Final-Yr_22.06.2020-
1.pdf
 https://www.youtube.com/channel/UCGLlbmSTaLNUPhDwsMe-SgQ

3 0 0 3
(20A03702b) MECHANICAL VIBRATIONS
Course Objectives:
● Demonstrate basic concepts and definitions of mechanical vibrations. To write equation of
motion for discrete spring-mass systems with different configuration using classical and
energy methods.
● To train the students about basic concepts of forced vibrations, vibration transmissibility and
isolation and seismic instruments. Further to understand about various vibration control
methods.
● To familiarize the students about two degree freedom system and various types of vibration
absorbers.
● To analyze the two degree and multi degree of freedom systems.
Course Outcomes:After successful completion of the course, the student will be able to
● Find natural frequency of un-damped single degree freedom systems
● Analyze the two degree freedom systems with and without damping
● Calculate transmissibility and isolation
● Solve problems on vibration absorber
● Calculate natural frequencies of multi degree freedom system
● Measure vibration parameters
● Use mechanical exciters and electro dynamic shaker
UNIT I Single Degree Freedom Systems
Single Degree Freedom Systems: Un-damped free vibration: Classical method, Energy method,
equivalent systems, torsional systems. Damped free vibration- Viscous damping, under damping,
critical damping, over damping. Coulomb damping, equivalent damping coefficient. Simple problems.
Whirling of shafts: Transverse vibrations:Dunkerley's lower bound approximation, Critical speed
of shafts.
UNIT II Forced vibrations of Single Degree Freedom Systems
Steady state forced vibration, sources of excitation, impressed harmonic force, resonance impressed
force due to unbalance, motion excitation, transmissibility and isolation, performance of different type
of isolators, power absorbed by viscous damping.
UNIT IIITwo Degree Freedom Systems:
Formulation of Equation of motion, Natural frequencies and modes of vibration by classical method,
coupled pendulum, forced vibration, dynamic vibration absorber.
UNIT IVMulti Degree Freedom Systems:
Lagrangian method for formulation of equation of motion Influence coefficient method, Lumped
mass and distributed mass systems, Stodola method, Holzer's method, model analysis of free and
forced vibrations.
UNIT VVibration measurement and Applications
Transducers: variable resistance transducers, Piezoelectric transducers, electro dynamic transducers
and linear variable differential transformer transducer; Vibration pickups: vibrometer, accelerometer,
velometer and phase distortion; Frequency-measuring instruments; Vibration exciters- Mechanical
exciters and electro dynamic shaker.
Textbooks:
1. Singiresu S. Rao, Mechanical Vibrations, 6/e, Pearson Education, 2018.
2. G.K.Groover, Mechanical Vibrations, Nemchand& Bro, 8/e, 2009.
Reference Books:
1. L. Meirovich, Elements of Vibrations Analysis, Tata McGraw Hill, 1986.
2. S. Graham Kelly, Mechanical Vibrations, Tata McGraw Hill, 1996
3. William Thomson, Theory of Vibrations with Applications, 5/e, Pearson, 2008
4. William Weaver, Timeoshenko, and Young, Vibration Problems in Engineering, 5/e, John
Wiley, 2013.
5. C. Nataraj, Vibration of Mechanical Systems, 1/e, Cenage Learning, 2012.

 https://www.iare.ac.in/sites/default/files/PPT/MVSD%20PPT.pdf
 https://www.iare.ac.in/sites/default/files/lecture_notes/MV_LECTURE_NOTES.pdf

3 0 0 3
(20A03702c) REFRIGERATION AND AIR CONDITIONING
Course Objectives:
 Provides insights in how thermodynamic principles are applied within the refrigeration and air
conditioning industry.
 Introduce the students how real systems used in commercial, industrial refrigeration and air
conditioning industries are built-up.
 Expose the students on various refrigeration methods like VCR, VAR and latest
developments.
 Know the various air conditioning methods like summer, winter and year round air
conditioning and to make the student to understand the practical applications of refrigeration
and air conditioning systems.
Course Outcomes:At the end the student will be able to
 Appraise the importance of humidifiers and dehumidifiers
 Select the requirements of temperature and humidity for human comfort
 Demonstrate the heat pump working and its components
 List the various air conditioning equipments
UNIT I
Introduction to Refrigeration
Necessity and Applications, Carnot Refrigerator, First and Second Law Applied to Refrigerating
Machines, Unit of Refrigeration, COP, EER, Different Refrigeration Methods.
Air Refrigeration: Bell-Coleman Cycle, Ideal and Actual Cycles, Open and Dense Air Systems -
Numerical Problems - Refrigeration Needs of Air Crafts.
UNIT IIVapour Compression Refrigeration ( VCR ) System
Vapour Compression Refrigeration ( VCR ) System - Basic Cycle - Working Principle and Essential
Components of the Plant - COP - Representation of Cycle On T-S and P-h Charts - Expander Vs.
Throttling, Effect of Sub Cooling and Super Heating - Cycle Analysis - Actual Cycle- Influence of
Various Parameters on System Performance - Construction and Use of P-h Charts - Numerical
Problems. Refrigerants - Desirable Properties - Classification of Refrigerants Used - Nomenclature-
Secondary Refrigerants- Lubricants - Ozone Depletion - Global Warming- Newer Refrigerants.
UNIT IIIVapor Absorption Refrigeration ( VAR ) System
Vapor Absorption Refrigeration ( VAR ) System-Description and Working of NH3 - Water System
and Li Br -Water ( Two Shell & Four Shell) System -Calculation of Max COP, Principle of Operation
of Three Fluid Absorption System
STEAM JET REFRIGERATION SYSTEM: Working Principle and Basic Components-Estimation
of Motive Steam Required Principle and Operation of: (I) Thermo-Electric Refrigerator (ii) Vortex
Tube or Hilsch Tube.
UNIT IVIntroduction to Air Conditioning:
Psychrometric Properties & Processes - Characterization of Sensible and Latent Heat Loads - Need
For Ventilation, Consideration of Infiltrated Air - Heat Load Concepts. Air Cooler (Evaporative
Cooling) ,Window, Split, Summer , Winter, Year Round, Central Air Conditioning Systems.
UNIT VAir Conditioning Equipment
Air Conditioning Equipment - Humidifiers - Dehumidifiers - Air Filters, Fans and Blowers.
Human Comfort: Requirements of Temperature, Humidity And Concept of Effective Temperature,
Comfort Chart. Heat Pump - Heat Sources - Different Heat Pump Circuits.
Textbooks:
1. Refrigeration and Air Conditioning, C P Arora, TMH, 15/e, 2013.
2. S. C Arora &Domkundwar, A Course in Refrigeration and Air conditioning, Dhanpat rai & Co,
2018.
Reference Books:
1. Refrigeration and Air Conditioning / Manohar Prasad / New Age, 2/e, 2013
2. Principles of Refrigeration - Dossat / Pearson Education, 4/e, 2007
3. Refrigeration and Air Conditioning-P.L.Ballaney, 2/e, 2012.
4. Basic Refrigeration and Air-Conditioning - P.N.Ananthanarayanan / TMH, 4/e, 2013.
NOTE: Tables/Codes: Thermal Engineering Data Book containing refrigerant and Psychrometric
property Tables and charts are permitted in Exam
 https://www.iare.ac.in/sites/default/files/lecture_notes/IARE_RAC_Lecture_Notes.pdf
 https://www.studocu.com/en-us/document/saint-louis-university/fluid-dynamics-
laboratory/refrigeration-lecture-notes-1/3020577
 http://home.iitk.ac.in/~samkhan/ME340A.htm
• http://dte.karnataka.gov.in/Institutes/gptkampli/GenericDocHandler/68-fc177b7d-f5d1-4580-
b577-b1118df994f4.pdf

3 0 0 3
(20A03703a) MECHATRONICS AND MEMS
(Professional Elective-V)
Course Objectives:
 Familiarize the technologies behind modern mechatronic systems.
 Explain fundamentals for the development of fully automated system.
 Develop a robotic or automated systems focusing on the hardware and software integration.
 Demonstrate the development of mechatronic system and MEMS.
Course Outcomes: At the end the student will be able to
 Demonstrate the knowledge of MEMS
 Classifying different fabrication techniques of MEMS
 Illustrate the application of MEMS in industry
UNIT I Introduction
Definition of Mechatronics, Need for Mechatronics in Industry, Objectives of mechatronics,
mechatronics design process, Mechatronics key elements, mechatronics applications – Computer
numerical control (CNC) machines, Tool monitoring systems, Flexible manufacturing system (FMS),
Industrial Robots, Automatic packaging systems, Automatic inspection systems.
UNIT II Sensors
Static and dynamic characteristics of sensors, Displacement, Position and Proximity sensors, Force
and torque sensors, Pressure sensors, Flow sensors, Temperature sensors, Acceleration sensors, Level
sensors, Light sensors, Smart material sensors, Micro and Nano sensors, Selection criteria for sensors.
UNIT III Actuators
Mechanical, Electrical, Hydraulic and Pneumatic Actuation systems, Characteristics and their
limitations, Design of Hydraulic and Pneumatic circuits, Piezoelectric actuators, Shape memory
alloys, Selection criteria for actuators.
UNIT IV Microprocessors, Microcontrollers and Programmable Logic Controllers
Architecture of Microprocessor, Microcontroller and Programmable Logic Controller, PLC
Programming using ladder diagrams, logics, latching, sequencing, timers relays and counters, data
handling, Analog input/output, selection of controllers.
UNIT V Micro Electro Mechanical Systems (MEMS)
History, Effect of scaling, Fabrication Techniques: Oxidation, Physical Vapor disposition, Chemical
Vapor Deposition, Lithography, Etching, Wafer bonding, LIGA, DRIE, Applications: Lab on chip.
Textbooks:
1. W. Bolton, Mechatronics Electronics Control Systems in Mechanical and Electrical Engineering, 3/e,
Pearson Education Press, 2005.
2. Devadas Shetty and Richard A Kolk, Mechatronic System Design, 2/e, Cengage learning, 2010.
3. N. Mahalik, MEMS, McGraw Hill Educations, 2017.
Reference Books:
1. Clarence W. de Silva, Mechatronics an Integrated Approach, CRC Press, 2004.
2. James J Allen, Micro Electro Mechanical Systems Design, CRC Press Taylor & Francis group, 2005.
3. Ganesh S Hedge, Mechatronics, Jones & Bartlett Learning, 2010.
4. Mohammed Gad, MEMS; Design and Fabrication, CRC Press, 2010.
 https://onlinecourses.nptel.ac.in/noc20_ee56/preview
 https://www.cet.edu.in/noticefiles/259_Lecturer%20Note%20on%20Mechatronics-ilovepdf-
compressed.pdf, https://lecturenotes.in/subject/1176/mechatronics-and-mems

3 0 0 3
(20A03703b) DESIGN OF HYDRAULIC AND PNEUMATIC SYSTEMS
Course Objectives:
 Familiarize on Fluid Power Engineering and Power Transmission System.
 Introduce the students, the basic concepts of hydraulic and pneumatic systems.
 Expose the students with various hydraulic and pneumatic actuators.
 Familiarize on fluid power systems and its applications to real time.
 Know the problem, which occur in fluid power systems and take necessary troubleshooting/
maintenance activities.
 Get practiced in designing hydraulic and pneumatic systems.
 Understand the design procedure available for Hydraulic and Pneumatic circuits.
Course Outcomes: At the end of the course, the student will be able to
 Compare the differences between hydraulic and pneumatic systems
 Identify the practical applications in automation
 Build the circuits for a given applications
 Develop hydraulic and pneumatic power packs
 Discuss the importance of PLC and microprocessor in hydraulic and pneumatic systems
UNIT I Introduction
Introduction to fluid power - Types, advantages and application of fluid power systems. Properties of
hydraulic fluids – General types of fluids – Fluid power symbols as per ISO/ANSI. Basic Components
of Hydraulic and Pneumatic Systems. Comparison of Mechanical, Electrical, Hydraulic & Pneumatic
systems for force and motion analysis in automation.
UNIT II
Hydraulic Pumps, Actuators: Types of hydraulic pumps - construction and working principle -
design considerations, selection, specifications and characteristics of pumps. Types of actuators-
construction and working principle - design considerations, selection, specifications and
characteristics of actuators.
Control And Regulation Elements: Direction control valves, Pressure control valves, Flow control
valves, Non-return valves, Reservoirs, Accumulators, Heating & cooling devices, Hoses. Selection of
valves for hydraulic circuits.
UNIT – III Design Of Hydraulic Circuits
Speed control circuits - Regenerative circuits- Accumulators and Intensifiers: Types of accumulators
– Accumulators circuits, sizing of accumulators, intensifier – Applications of Intensifier–Intensifier
circuit. - Reservoir design - Selection of components. Hydraulic circuits - Reciprocating - Quick
return - Sequencing synchronizing - Safety circuits - Industrial circuits - Press - Milling Machine -
Planner - Fork Lift.
UNIT – IV Pneumatic Systems
Pneumatic fundamentals - Properties of air – Compressors – Filter, Regulator, and Lubricator unit –
Air control valves, Quick exhaust valves, and pneumatic actuators. Control Elements - Logic
Circuits -Position - Pressure Sensing - Switching – Electro Pneumatic - Electro Hydraulic Circuits -
Robotic Circuits.
UNIT – V Design Of Pneumatic Circuits
Classic-Cascade-Step counter - Combination -Methods - PLC-Microprocessors -Uses - Selection
criteria for Pneumatic components - Installation and Maintenance of Hydraulic and Pneumatic power
packs - Fault finding - Principles of Low Cost Automation - Case studies.
Textbooks:
1. Anthony Esposito, “Fluid Power with Applications”, Pearson Education 2000.
2. Majumdar S.R, “Oil Hydraulics”, Tata McGraw Hill, 2000.
3. Majumdar S.R, “Pneumatic Systems – Principles and Maintenance”, Tata McGraw Hill,
2001.
Reference Books:
1. Andrew Parr, Hydraulic & Pneumatics, 2/e, Jaico Publishing House Elsevier, 1999.
2. Harry L. Stevart D.B, “Practical Guide to Fluid Power”, Taraoeala Sons and Port Ltd.
Broadey, 1976.
3. Dudelyt, A. Pease and John T. Pippenger, “Basic Fluid Power”, Prentice Hall, 1987.
 Chrome-extension://efaidnbmnnibpcaglefindmkaj/viewer.htms?pdfhrl
https%3A%2%2Fwww.iare.ac.in%2Fsites%2Fdefault%2Ffiles%2FDHPS%2520LECT
URER%2520NOTES%2520FINAL.pdf&chunk=true.
 chromeextension://efaidnbmnnnibpcajpcglclefindmkaj/viewer.html?pdfurl=https%3A%
2F%2Fwww.iare.ac.in%2Fsites%2Fdefault%2Ffiles%2FDHPS%2520PPT%2520%252
0FINAL.pdf&chunk=true.

3 0 0 3
(20A03703c) GEOMETRIC DIMENSIONING AND TOLERANCES
Course Objectives:
 Teach the basics of the geometric dimensioning and tolerances.
 Familiar with five groups of GD&T tolerances, form, orientation, location, runout and
profile tolerances.
 Introduce tolerances of profiles of lines and surfaces with or without datums.
 Expose the students to various surface roughness parameters and their measurements in two
dimensions.
 Understand the concepts of dimensional chains and inspection techniques.
Course Outcomes:
 This course systematically introduces the essentials of the language of geometric
dimensioning and tolerancing (GD&T) based on ASME standards, as well as the essentials of
surface roughness measurements in both 2D and 3D including filtering techniques.
 This course also introduces the related concepts of Vectorial dimensioning and tolerancing,
dimensional chains, measurement uncertainty, etc.
 The knowledge gained by the students by learning the above topics will help them to perform
very well in their profession as metrologists as well as product designers.
UNIT I Basic Concepts
General terms and definitions of geometrical features - General principle of sizes - System of limits
and fits - Inspection of dimensional and geometrical deviations - Datums, datum systems, and
selection of datums. Restraining degrees of freedom, DOF, Simulators. Rule #1(Boundary principle)
and Rule #2.
UNIT II Form and Orientation Tolerances
Principles of dimensioning - Introduction to geometric dimensioning and tolerancing (GD&T); Form
tolerances: types, specifications and interpretations - measurement and evaluation of straightness,
flatness and roundness - Orientation tolerances: types, specifications and interpretations, and
verification of orientation tolerances. Exercises on each group. RFS, MMC and LMC concepts.
UNIT III Location, Runout and Profile Tolerances
Tolerances of location: types, specifications and interpretations - verification techniques - Tolerances
of profiles of lines and surfaces with or without datums - Tolerances of runout - Tolerancing of angles
and cones. Exercises on each group. RFS, MMC and LMC concepts.
UNIT IV Surface Roughness
Various parameters and their measurements in two dimensions - filtering and filtering techniques -
areal parameters, symbology
UNIT V Inspection of GD&T call-outs
Vectorial dimensioning and tolerancing - Statistical tolerancing of mechanical assemblies -
Dimensional chains - Measurement uncertainty - Computer-aided tolerancing and verification.
Inspection techniques- conventional and CMM.
Textbooks:
1. Drake, P. J., Dimensioning and Tolerance Handbook, McGraw-Hill, Inc., New York. 1999.
2. Meadows, J. D., Geometric Dimensioning and Tolerancing: Applications and Techniques for
use in Design, Manufacturing and Inspection, Marcel Dekker, Inc., New York. 1995.
3. Gill, P. S., Geometric Dimensioning and Tolerancing, S. K. Kataria& Sons, New Delhi, 2/e,
2013.
4. ASME 14.5 - 2009 standards,
5. Alex Krulikowski, Fundamentals of geometric dimensioning and tolerancing, Cengage
Learning, 3/e, 2012.
6. James D Meadows, ―Measurement of Geometric Tolerances in Manufacturing, CRC Press,

1/e, 1998.
Reference Books:
1. Gupta, I. C., A Text book of Engineering Metrology, Dhanpat Rai Publications, New Delhi,
2018.
2. Galyer, J. F. W. and C. R. Shotbolt, Metrology for Engineers, Cassell Publishers, London,
5/e, 1990.
3. Henzold, G., Handbook of Geometrical Tolerancing: Design, Manufacturing and Inspection,
John Wiley & Sons, Chichester, 2/e, 2006.
4. Muralikrishnan, B. and J. Raja, Computational Surface and Roundness Metrology, Springer
USA, 1/e, 2010.
5. Relevant Indian and International Standards.
6. Whitehouse, D. J., Surfaces and their Measurement, Hermes Penton Science, London, 2002.
 https://www.youtube.com/watch?v=X_VepJhq_vk
 https://www.youtube.com/watch?v=cjzSXPDBA_Q&t=1s
 https://www.youtube.com/watch?v=-tLq1wXio0U
 https://digitaldefynd.com/best-gdt-courses/

3 0 0 3
20A52701a) ENTREPRENEURSHIP & INCUBATION
(HUMANITIES ELECTIVE II)
Course Objectives:
 To make the student understand about Entrepreneurship
 To enable the student in knowing various sources of generating new ideas in setting up of
New enterprise
 To facilitate the student in knowing various sources of finance in starting up of a business
 To impart knowledge about various government sources which provide financial assistance to
entrepreneurs/ women entrepreneurs
 To encourage the student in creating and designing business plans
Course Outcomes:
 Understand the concept of Entrepreneurship and challenges in the world of competition.
 Apply the Knowledge in generating ideas for New Ventures.
 Analyze various sources of finance and subsidies to entrepreneur/women Entrepreneurs.
 Evaluate the role of central government and state government in promoting ntrepreneurship.
 Create and design business plan structure through incubations.
UNIT I
Entrepreneurship - Concept, knowledge and skills requirement - Characteristics of successful
entrepreneurs - Entrepreneurship process - Factors impacting emergence of entrepreneurship -
Differences between Entrepreneur and Intrapreneur - Understanding individual entrepreneurial
mindset and personality - Recent trends in Entrepreneurship.
UNIT II
Starting the New Venture - Generating business idea – Sources of new ideas & methods of generating
ideas - Opportunity recognition - Feasibility study - Market feasibility, technical/operational
feasibility - Financial feasibility - Drawing business plan - Preparing project report - Presenting
business plan to investors.
UNIT III
Sources of finance - Various sources of Finance available - Long term sources - Short term sources -
Institutional Finance – Commercial Banks, SFC's in India - NBFC's in India - their way of financing
in India for small and medium business - Entrepreneurship development programs in India - The
entrepreneurial journey- Institutions in aid of entrepreneurship development
UNIT IV
Women Entrepreneurship - Entrepreneurship Development and Government - Role of Central
Government and State Government in promoting women Entrepreneurship - Introduction to various
incentives, subsidies and grants – Export- oriented Units - Fiscal and Tax concessions available -
Women entrepreneurship - Role and importance - Growth of women entrepreneurship in India -
Issues & Challenges - Entrepreneurial motivations.
UNIT V
Fundamentals of Business Incubation - Principles and good practices of business incubation- Process
of business incubation and the business incubator and how they operate and influence the
Type/benefits of incubators - Corporate/educational / institutional incubators - Broader business
incubation environment - Pre-Incubation and Post - Incubation process - Idea lab, Business plan
structure - Value proposition
Textbooks:
1. D F Kuratko and T V Rao, “Entrepreneurship” - A South-Asian Perspective – Cengage
Learning, 2012. (For PPT, Case Solutions Faculty may visit : login.cengage.com)
2. Nandan H, “ Fundamentals of Entrepreneurship”, PHI, 2013
References:
1. Vasant Desai, “Small Scale Industries and Entrepreneurship”, Himalaya Publishing 2012.
2. Rajeev Roy “Entrepreneurship”, 2nd Edition, Oxford, 2012.
3. B.JanakiramandM.Rizwana‖ “Entrepreneurship Development: Text & Cases”, Excel Books,

2011.
4. Stuart Read, Effectual “Entrepreneurship”, Routledge, 2013.
E-Resources
1. Entrepreneurship-Through-the-Lens-of-enture Capital
2. http://www.onlinevideolecture.com/?course=mba-programs&subject=entrepreneurship
3. http://nptel.ac.in/courses/122106032/Pdf/7_4.pd
4. http://freevideolectures.com/Course/3514/Economics-/-Management-/-Entrepreneurhip/50

3 0 0 3
(20A52701b) MANAGEMENT SCIENCE
(HUMANITIES ELECTIVE-II)
Course Objectives:
 To provide fundamental knowledge on Management, Administration, Organization & its
concepts.
 To make the students understand the role of management in Production
 To impart the concept of HRM in order to have an idea on Recruitment, Selection,Training&
Development, job evaluation and Merit rating concepts
 To create awareness on identify Strategic Management areas & the PERT/CPM for better
Project Management
 To make the students aware of the contemporary issues in management
Course Outcomes:
 Understand the concepts & principles of management and designs of organization in a
practical world
 Apply the knowledge of Work-study principles & Quality Control techniques in industry
 Analyze the concepts of HRM in Recruitment, Selection and Training & Development.
 Evaluate PERT/CPM Techniques for projects of an enterprise and estimate time & cost of
project & to analyze the business through SWOT.
 Create Modern technology in management science.
UNITI INTRODUCTION TO MANAGEMENT

Management - Concept and meaning - Nature-Functions - Management as a Science and Art and
both. Schools of Management Thought - Taylor’s Scientific Theory-Henry Fayol’s principles - Eltan
Mayo’s Human relations - Systems Theory - Organisational Designs - Line organization - Line &
Staff Organization - Functional Organization - Matrix Organization - Project Organization -
Committee form of Organization - Social responsibilities of Management.
UNIT II OPERATIONS MANAGEMENT

Principles and Types of Plant Layout - Methods of Production (Job, batch and Mass Production),
Work Study - Statistical Quality Control- Deming‘s contribution to Quality. Material Management -
Objectives - Inventory-Functions - Types, Inventory Techniques - EOQ-ABC Analysis - Purchase
Procedure and Stores Management - Marketing Management - Concept - Meaning - Nature-
Functions of Marketing - Marketing Mix - Channels of Distribution - Advertisement and Sales
Promotion - Marketing Strategies based on Product Life Cycle.
UNIT III HUMAN RESOURCES MANAGEMENT (HRM)

HRM - Definition and Meaning – Nature - Managerial and Operative functions - Evolution of HRM -
Job Analysis - Human Resource Planning(HRP) - Employee Recruitment-Sources of Recruitment -
Employee Selection - Process and Tests in Employee Selection - Employee Training and
Development - On-the- job & Off-the-job training methods - Performance Appraisal Concept -
Methods of Performance Appraisal – Placement - Employee Induction - Wage and Salary
Administration
UNIT IV STRATEGIC & PROJECT MANAGEMENT

Definition& Meaning - Setting of Vision - Mission - Goals - Corporate Planning Process -
Environmental Scanning - Steps in Strategy Formulation and Implementation - SWOT Analysis -
Project Management - Network Analysis - Programme Evaluation and Review Technique (PERT) -
Critical Path Method (CPM) Identifying Critical Path - Probability of Completing the project within
given time - Project Cost- Analysis - Project Crashing (Simple problems).
UNIT V CONTEMPORARY ISSUES IN MANAGEMENT

The concept of Management Information System(MIS) - Materials Requirement Planning (MRP) -
Customer Relations Management(CRM) - Total Quality Management (TQM) - Six Sigma Concept -
Supply Chain Management(SCM) - Enterprise Resource Planning (ERP) - Performance Management
- Business Process Outsourcing (BPO) - Business Process Re-engineering and Bench Marking -
Balanced Score Card - Knowledge Management.
Textbooks:
1. A.R Aryasri, “Management Science”, TMH, 2013
2. Stoner, Freeman, Gilbert, Management, Pearson Education, New Delhi, 2012.
References:
1. Koontz &Weihrich, “Essentials of Management”, 6th edition, TMH, 2005.
2. Thomas N.Duening& John M.Ivancevich, “Management Principles and Guidelines”, Biztantra.
3. Kanishka Bedi, “Production and Operations Management”, Oxford University Press, 2004.
4. Samuel C.Certo, “Modern Management”, 9th edition, PHI, 2005

3 0 0 3
(20A52701c) ENTERPRISE RESOURCE PLANNING
(HUMANITIES ELECTIVE-II)
Course Objectives:
 To provide a contemporary and forward-looking on the theory and practice of Enterprise
Resource Planning
 To enable the students in knowing the Advantages of ERP
 To train the students to develop the basic understanding of how ERP enriches the
 Business organizations in achieving a multidimensional growth.
 Impart knowledge about the historical background of BPR
 To aim at preparing the students, technologically competitive and make them ready to self-
upgrade with the higher technical skills.
Course Outcomes:
 Understand the basic use of ERP Package and its role in integrating business functions.
 Explain the challenges of ERP system in the organization
 Apply the knowledge in implementing ERP system for business
 Evaluate the role of IT in taking decisions with MIS
 Create reengineered business processes with process redesign
UNITI
Introduction to ERP: Enterprise – An Overview Integrated Management Information, Business
Modeling, Integrated Data Model Business Processing Reengineering(BPR), Data Warehousing, Data
Mining, On-line Analytical Processing(OLAP), Supply Chain Management (SCM), Customer
Relationship Management(CRM),
UNITII
Benefits of ERP: Reduction of Lead-Time, On-time Shipment, Reduction in Cycle Time, Improved
Resource Utilization, Better Customer Satisfaction, Improved Supplier Performance, Increased
Flexibility, Reduced Quality Costs, Improved Information Accuracy and Design-making Capability
UNITIII
ERP Implementation Lifecycle: Pre-evaluation Screening, Package Evaluation, Project Planning
Phase, Gap Analysis, Reengineering, Configuration, Implementation Team Training, Testing, Going
Live, End-user Training, Post-implementation (Maintenance mode)
UNITIV
BPR: Historical background: Nature, significance and rationale of business process reengineering
(BPR), Fundamentals of BPR. Major issues in process redesign: Business vision and process
objectives, Processes to be redesigned, Measuring existing processes,
UNITV
IT in ERP: Role of information technology (IT) and identifying IT levers. Designing and building a
prototype of the new process: BPR phases, Relationship between BPR phases. MIS - Management
Information System, DSS - Decision Support System, EIS - Executive Information System.
Textbooks:
1. Pankaj Sharma. “Enterprise Resource Planning”. Aph Publishing Corporation, New Delhi,
2004.
2. Alexis Leon, “Enterprise Resource Planning”, IV Edition, Mc.Graw Hill, 2019
References:
1. Marianne Bradford “Modern ERP”, 3rd edition.
2. “ERP making it happen Thomas f. Wallace and Michael
3. Directing the ERP Implementation Michael w pelphrey

3 0 0 3
(20A03706) INDUSTRIAL AUTOMATION
(Skill Oriented Course-V)
Course Objectives:
 Introduce basic concepts and principles of Industrial Automation.
 Familiarize with fluid power systems circuits.
 Describe concepts of SCADA software
 Explain the principles of PLC and 8085 microprocessor.
 Expose the students on Mechatronics.
Course Outcomes:At the end of the course, student will be able to
 Summarizes the how fluid power system work
 Discuss about SCADA software
 Develop the skills related to predict the output for various programs.
 Explain the concepts of mechatronics
Module 1: Design and testing of fluid power circuits to control
Introduction to Fluid power systems, Symbolic representation of hydraulic and pneumatic
components.
Tasks:-
1. Pneumatic trainer kit with FRL Unit, Single acting cylinder, push button.
2. Pneumatic training kit with FRL unit, Double acting cylinder, manually actuated DCV.
3. Pneumatic trainer kit with FRL unit, Double acting cylinder, Pilot actuated DCV.
4. Pneumatic trainer kit with FRL unit Double acting cylinder, Double solenoid actuated DCV,
DCV with sensor / magnetic reed.
5. Hydraulic power pack with pumps and pressure relief valve.
Module 2:
 Open source SCADA software such as Free SCADA, Open SCADA,
 Indigo SCADA Code Sys Open source for PLC programming and interfacing with real time
PLC
 Delta PLC software – free ware and corresponding PLC programming software.
 8085 Microprocessor Trainer with Power Supply
 Traffic Light Control System
Module 3:Mechatronics
 Experiment on P, PI and PID Controller.
 Simulation of Hydraulic Actuation System.
 Simulation of Pneumatic Actuation System.
 Simulation on Stepper Motor.
 Simulation on Logic gates, decoders and flip-flops.
References:
1. B. Gavali, S. A. Patil and A. R. Koli, "Technology-Based Learning system in
Programmable Logic Controller Education," 2016 IEEE Eighth International Conference
on Technology for Education (T4E), Mumbai, 2016, pp. 264-265.
2. Groover, Mikell , Fundamentals of Modern Manufacturing: Materials, Processes, and
Systems, 2014.
3. Lamb, Frank. Industrial Automation: Hands On (English Edition). NC, McGraw-Hill
Education, 2013. ISBN 978-0071816458.
Note:- Trainer can use freeware simulation software's.
http://iotmumbai.bharatividyapeeth.edu/media/pdf/lab_manuals/Manual_EE5I_EIA_22526.pdf
 https://faculty.ksu.edu.sa/sites/default/files/lab-manual_v3.pdf
• https://digitalcommons.calpoly.edu/cgi/viewcontent.cgi?article=1494&context=eesp
OPEN
ELECTIVES

B.Tech III-I Sem L T P C
3 0 0 3
(20A01505) BUILDING TECHNOLOGY
(Open Elective-I)
Course Objectives:
 To know different types of buildings, principles and planning of the buildings.
 To identify the termite control measure in buildings, and importance of grouping
circulation, lighting and ventilation aspects in buildings.
 To know the different modes of vertical transportation in buildings.
 To know the utilization of prefabricated structural elements in buildings.
 To know the importance of acoustics in planning and designing of buildings.

 Understand the principles in planning and design the buildings
 To get different types of buildings, principles and planning of the buildings
 To know the different methods of termite proofing in buildings.
 Know the different methods of vertical transportation in buildings.
 Know the implementation of prefabricated units in buildings and effect of earthquake on
buildings.
 Know the importance of acoustics in planning and designing of buildings.
UNIT I
Overview of the course, basic definitions, buildings-types-components-economy and design-
principles of planning of buildings and their importance. Definitions and importance of grouping and
circulation-lighting and ventilation-consideration of the above aspects during planning of building.
UNIT II
Termite proofing: Inspection-control measures and precautions-lighting protectionof buildings-
general principles of design of openings-various types of fire protection measures to be considered
while panning a building.
UNIT III
Vertical transportation in a building: Types of vertical transportation-stairs-different forms of stairs-
planning of stairs-other modes of vertical transportation –lifts-ramps-escalators.
UNIT IV
Prefabrication systems in residential buildings-walls-openings-cupboards-shelves etc., planning and
modules and sizes of components in prefabrication. Planning and designing of residential buildings
against the earthquake forces, principles, seismic forces and their effect on buildings.
UNIT V
Acoustics –effect of noise –properties of noise and its measurements, principles of acoustics of
building. Sound insulation-importance and measures.
Textbooks:
1. Building construction by Varghese, PHI Learning Private Limited 2 nd Edition 2015
2. Building construction by Punmia.B.C, Jain.A.K and Jain.A.K Laxmi Publications 11 th
edition 2016
Reference Books:
1. National Building Code of India, Bureau of Indian Standards
2. Building construction-Technical teachers training institute, Madras, Tata McGraw Hill.
3. Building construction by S.P.Arora and S.P.BrndraDhanpat Rai and Sons Publications, New
Delh 2014 edition
https://nptel.ac.in/courses/105102206

3 0 0 3
(20A02505) ELECTRIC VEHICLES
(Open Elective-I)
Course Objectives:
 To get exposed to new technologies of battery electric vehicles, fuel cell electric vehicles
 To get exposed to EV system configuration and parameters
 To know about electro mobility and environmental issues of EVs
 To understand about basic EV propulsion and dynamics
 To understand about fuel cell technologies for EV and HVEs
 To know about basic battery charging and control strategies used in electric vehicles
Course Outcomes:
 Understand and differentiate between conventional and latest trends in Electric Vehicles
 Analyze various EV resources, EV dynamics and Battery charging
 Apply basic concepts of EV to design complete EV system
 Design EV system with various fundamental concepts
UNIT I INTRODUCTION TO EV SYSTEMS AND PARAMETERS

Past, Present and Future EV, EV Concept, EV Technology, State-of-the Art EVs, EV configuration, EV
system, Fixed and Variable gearing, single and multiple motor drive, in-wheel drives, EV parameters:
Weight, size, force and energy, performance parameters.
UNIT II EV AND ENERGY SOURCES
Electro mobility and the environment, history of Electric power trains, carbon emissions from fuels,
green houses and pollutants, comparison of conventional, battery, hybrid and fuel cell electric systems
UNIT III EV PROPULSION AND DYNAMICS
Choice of electric propulsion system, block diagram, concept of EV Motors, single and multi motor
configurations, fixed and variable geared transmission, In-wheel motor configuration, classification,
Electric motors used in current vehicle applications, Recent EV Motors, Vehicle load factors, vehicle
acceleration.
UNIT IV FUEL CELLS
Introduction of fuel cells, basic operation, model, voltage, power and efficiency, power plant system –
characteristics, sizing, Example of fuel cell electric vehicle.
Introduction to HEV, brake specific fuel consumption, comparison of series, series-parallel hybrid
systems, examples
UNIT V BATTERY CHARGING AND CONTROL
Battery charging: Basic requirements, charger architecture, charger functions, wireless charging,
power factor correction.
Control: Introduction, modelling of electromechanical system, feedback controller design approach, PI
controllers designing, torque-loop, speed control loop compensation, acceleration of battery electric
vehicle
Textbooks:
1. C.C Chan, K.T Chau: Modern Electric Vehicle Technology, Oxford University Press Inc., New
York 2001.
2. James Larminie, John Lowry, Electric Vehicle Technology Explained, Wiley, 2003.
Reference Books:
1. Electric and Hybrid Vehicles Design Fundamentals, Iqbal Husain, CRC Press 2005.
2. Ali Emadi, Advanced Electric Drive Vehicles, CRC Press, 2015.

1. https://onlinecourses.nptel.ac.in/noc22_ee53/preview

3 0 0 3
(20A04505) DIGITAL ELECTRONICS
(Open Elective Course- I)
Course Objectives:
 To provide the fundamental concepts associated with the digital logic and circuit design.
 To introduce the basic concepts and laws involved in the Boolean algebra and logic families
and digital circuits.
 To familiarize with the different number systems, logic gates, and combinational and
sequential circuits, memory elements utilized in the different digital circuits and systems.
 To introduce different digital logic families
Course Outcomes:
 Become familiar with the Boolean algebra, logic gates, logical variables, the truth table,
number systems, codes, and their conversion from to others
 Learn the minimization techniques to simply the hardware requirements of digital circuits,
implement it, design and apply for real time digital systems
 Understand the working mechanism and design guidelines of different combinational,
sequential circuits, memory elements and their role in the digital system design.
 Understand different logic families and use the best combination of ICs during the design of a
digital system
UNIT 1
DIGITAL FUNDAMENTALS: Number Systems - Decimal, binary, octal, Hexadecimal,1's and 2's
complements,Codes - Binary, BCD, Excess 3, Gray, Alphanumeric codes, Booleantheorems. Logic
gates: Universal gates, Sum of products and product of sums, Minterms and Maxterms, Karnaugh
map Minimization.
UNIT II
COMBINATIONAL CIRCUITS: Half and Full Adders, Half and FullSubtractors, Binary Parallel
Adder Carry look ahead Adder, BCD 'Adder, Multiplexer,Demultiplexer, MagniudeComparator,
Decoder, Encoder, Priority Encoder.
UNIT III
SYNCHRONOUS SEQUENTIAL CIRCUITS: Flip flops - SR, JK, T, D, Master/Slave FF- operation
and excitation tables, Triggering of FF, conversion of FF. Counters- Ripple Counters, Ring Counters,
Shift registers, Universal Shift Register.
UNIT IV
MEMORY DEVICES: Basic memory structure - ROM, PROM, EPROM, EEPROM, EAPROM,
RAM, Static and dynamic RAM.Programmable Logic Devices: Programmable Logic Array (PLA),
Programmable Array Logic (PAL), Field Programmable Gate Arrays (FPGA).
UNIT V
Digital Logic Families: Logic levels,propagation delay, power dissipation, fan-out and fan-in, noise
margin, RTL, TTL, ECL, CMOS.
Textbooks:
1. Modern Digital Electronics(Edition III) : R. P. Jarn; TMH
2. Digital Fundamentals: Thomas I. Floyd
3. Digital circuits and design: S. Salivahanan, and S. Anvzzhagan
References:
1. Digital Integrated Electronics: Taub & Schilling; MGH
2. Digital Design: Morris Mano; PHI.Course

3 0 0 3
(20A05505a) JAVA PROGRAMMING
(Open Elective Course – I)
Course Objectives:
 To understand object-oriented concepts and problem-solving techniques
 To obtain knowledge about the principles of inheritance and polymorphism
 To implement the concept of packages, interfaces, exception handling and concurrency
mechanism.
 To design the GUIs using applets and swing controls.
 To understand the Java Database Connectivity Architecture
Course Outcomes:
 Solve real-world problems using OOP techniques.
 Apply code reusability through inheritance, packages and interfaces
 Solve problems using java collection framework and I/O classes.
 Develop applications by using parallel streams for better performance and develop applets for web
applications.
 Build GUIs and handle events generated by user interactions and Use the JDBC API to access the
database.
UNIT I Introduction
Introduction to Object Oriented Programming, The History and Evolution of Java, Introduction to Classes,
Objects, Methods, Constructors, this keyword, Garbage Collection, Data Types, Variables, Type
Conversion and Casting, Arrays, Operators, Control Statements, Method Overloading, Constructor
Overloading, Parameter Passing, Recursion, String Class and String handling methods
UNIT II Inheritance, Packages, Interfaces

Inheritance: Basics, Using Super, Creating Multilevel hierarchy, Method overriding, Dynamic Method
Dispatch, Using Abstract classes, Using final with inheritance, Object class,
Packages: Basics, Finding packages and CLASSPATH, Access Protection, Importing packages.
Interfaces: Definition, Implementing Interfaces, Extending Interfaces, Nested Interfaces, Applying
Interfaces, Variables in Interfaces.
UNIT III Exception handling, Stream based I/O

Exception handling - Fundamentals, Exception types, Uncaught exceptions, using try and catch, multiple
catch clauses, nested try statements, throw, throws and finally, built-in exceptions, creating own exception
subclasses.
Stream based I/O (java.io) – The Stream Classes-Byte streams and Character streams, Reading console
Input and Writing Console Output, File class, Reading and Writing Files, Random access file operations,
The Console class, Serialization, Enumerations, Autoboxing, Generics.
UNIT IV Multithreading, The Collections Framework

Multithreading: The Java thread model, creating threads, Thread priorities, Synchronizing threads,
Interthread communication.
The Collections Framework (java.util): Collections overview, Collection Interfaces, The Collectionclasses-
Array List, Linked List, Hash Set, Tree Set, Priority Queue, Array Deque. Hashtable, Properties, Stack,
Vector, String Tokenizer, Bit Set, Date, Calendar, Random, Formatter, Scanner.
UNIT V Applet, GUI Programming with Swings, Accessing Databases with JDBC
Applet: Basics, Architecture, Applet Skeleton, requesting repainting, using the status window, passing
parameters to applets
GUI Programming with Swings – The origin and design philosophy of swing, components and containers,
layout managers, event handling, using a push button, jtextfield, jlabel and image icon, the swing buttons,
jtext field, jscrollpane, jlist, jcombobox, trees, jtable, An overview of jmenubar, jmenu and jmenuitem,
creating a main menu, show message dialog, show confirmdialog, show input dialog, show option dialog,
jdialog, create a modeless dialog.
Accessing Databases with JDBC:
Types of Drivers, JDBC Architecture, JDBC classes and Interfaces, Basic steps in developing JDBC
applications, Creating a new database and table with JDBC.
Textbooks:
1. Java The complete reference, 9th edition, Herbert Schildt, McGraw Hill Education (India) Pvt. Ltd.
2. Java How to Program, 10th Edition, Paul Dietel, Harvey Dietel, Pearson Education.
Reference Books:
1. Understanding Object-Oriented Programming with Java, updated edition, T. Budd, Pearson Education.
2. Core Java Volume – 1 Fundamentals, Cay S. Horstmann, Pearson Education.
3. Java Programming for core and advanced learners, Sagayaraj, Dennis, Karthik andGajalakshmi,
University Press
4. Introduction to Java programming, Y. Daniel Liang, Pearson Education.
5. Object Oriented Programming through Java, P. Radha Krishna, University Press.
6. Programming in Java, S. Malhotra, S. Chaudhary, 2nd edition, Oxford Univ. Press.
7. Java Programming and Object-oriented Application Development, R.A. Johnson,
Cengage Learning.

https://www.w3schools.com/java/java_oop.asp
http://peterindia.net/JavaFiles.html

3 0 0 3
(20A05602T) ARTIFICIAL INTELLIGENCE
Open Elective Course - I
Course Objectives:
This course is designed to:
 Introduce Artificial Intelligence
 Teach about the machine learning environment
 Present the searching Technique for Problem Solving
 Introduce Natural Language Processing and Robotics
Course Outcomes:
After completion of the course, students will be able to
 Apply searching techniques for solving a problem
 Design Intelligent Agents
 Develop Natural Language Interface for Machines
 Design mini robots
 Summarize past, present and future of Artificial Intelligence
UNIT I Introduction Lecture 9Hrs

Introduction: What is AI, Foundations of AI, History of AI, The State of Art.
Intelligent Agents: Agents and Environments, Good Behaviour: The Concept of Rationality, The Nature of
Environments, The Structure of Agents.
UNIT II Solving Problems by searching Lecture 9 Hrs

Problem Solving Agents, Example problems, Searching for Solutions, Uninformed Search Strategies,
Informed search strategies, Heuristic Functions, Beyond Classical Search: Local Search Algorithms and
Optimization Problems, Local Search in Continues Spaces, Searching with Nondeterministic Actions,
Searching with partial observations, online search agents and unknown environments.
UNIT III Reinforcement Learning & Natural Language Processing Lecture 8Hrs
Reinforcement Learning: Introduction, Passive Reinforcement Learning, Active Reinforcement Learning,
Generalization in Reinforcement Learning, Policy Search, applications of RL
Natural Language Processing: Language Models, Text Classification, Information Retrieval, Information
Extraction.
UNIT IV Natural Language for Communication Lecture 8 Hrs

Natural Language for Communication: Phrase structure grammars, Syntactic Analysis, Augmented
Grammars and semantic Interpretation, Machine Translation, Speech Recognition
Perception: Image Formation, Early Image Processing Operations, Object Recognition by appearance,
Reconstructing the 3D World, Object Recognition from Structural information, Using Vision.
UNIT V Robotics Lecture 10Hrs

Robotics: Introduction, Robot Hardware, Robotic Perception, planning to move, planning uncertain
movements, Moving, Robotic software architectures, application domains
Philosophical foundations: Weak AI, Strong AI, Ethics and Risks of AI, Agent Components, Agent
Architectures, Are we going in the right direction, What if AI does succeed.
Textbooks:
1. Stuart J.Russell, Peter Norvig, “Artificial Intelligence A Modern Approach”, 3 rd Edition, Pearson
Education, 2019.
Reference Books:
1. Nilsson, Nils J., and Nils Johan Nilsson. Artificial intelligence: a new synthesis. Morgan Kaufmann,
1998.
2. Johnson, Benny G., Fred Phillips, and Linda G. Chase. "An intelligent tutoring system for the accounting
cycle: Enhancing textbook homework with artificial intelligence." Journal of Accounting Education 27.1
(2009): 30-39.
http://peterindia.net/AILinks.html
http://nptel.ac.in/courses/106106139/
https://nptel.ac.in/courses/106/105/106105152/

3 0 0 3
(20A05505c) MOBILE APPLICATION DEVELOPMENT USINGANDROID
(Open Elective-I)
Course Objectives:
 Facilitate students to understand android SDK.
 Help students to gain a basic understanding of Android application development.
 Inculcate working knowledge of Android Studio development tool.
Course Outcomes:
 Identify various concepts of mobile programming that make it unique from programming for
other platforms.
 Evaluate mobile applications on their design pros and cons.
 Utilize rapid prototyping techniques to design and develop sophisticated mobile interfaces.
 Develop mobile applications for the Android operating system that use basic and advanced
phone features.
 Demonstrate the deployment of applications to the Android marketplace for distribution.
UNIT I Introduction and Mobile User Interface Design
Introduction to Android: The Android Platform, Android SDK, Android Studio Installation,
Android Installation, building you First Android application, Understanding Anatomy of
Android Application, Android Manifest file.
UNIT II Activities, Intents and Android User Interface
Android Application Design Essentials: Anatomy of an Android applications, Android
terminologies, Application Context, Activities, Services, Intents, Receiving and Broadcasting
Intents, Android Manifest File and its common settings, Using Intent Filter, Permissions
UNIT III Advanced User Interface and Data Persistence
Android User Interface Design Essentials: User Interface Screen elements, Designing User
Interfaces with Layouts, Drawing and Working with Animation.
UNIT IV Android Services, Publishing Android Applications
Testing Android applications, Publishing Android application, Using Android preferences,
Managing Application resources in a hierarchy, working with different types of resources.
UNIT V Android Databases

Using Common Android APIs: Using Android Data and Storage APIs, managing data using SQLite,
Sharing Data between Applications with Content Providers, Using Android Networking APIs, Using
Android Web APIs, Using Android Telephony APIs, Deploying Android Application to the World.
Textbooks:
1. Lauren Darcey and Shane Conder, “Android Wireless Application Development”, Pearson
Education, 2nd ed. (2011).
2. Jeff McWherter and Scott Gowell, "Professional Mobile Application Development,"
Wiley India, FirstEdition,2012.
Reference Books:
1. Reto Meier, “Professional Android 2 Application Development”, Wiley India Pvt Ltd
2. Mark L Murphy, “Beginning Android”, Wiley India Pvt Ltd
3. Android Application Development All in one for Dummies by Barry Burd, Edition: I
1. https://developer.android.com/

3 0 0 3
(20A27505) COMPUTER APPLICATIONS IN FOOD TECHNOLOGY

(Open Elective-1)
Course Objectives:
 To know different software and applications in food technology.
 To understand the Chemical kinetics in food processing, Microbial distraction in thermal
processing of food.
 To acquire knowledge on computer aided manufacturing and control of food machinery,
inventory control, process control.
Course Outcomes:
 Students will gain knowledge on software in food technology, data analysis, Chemical
kinetics, microbial distortion in thermal process
 Use of linear regression in analyzing sensory data, application of computer in some common
food industries like, milk plant, bakery units & fruits vegetable plants.
UNIT I
Introduction to various software and their applications in food technology. Application of MS Excel
to solve the problems of Food Technology, SPSS and JMP for data analysis, Pro-Engineering for
design, Lab VIEW and SCADA for process control .
UNIT II
Chemical kinetics in food processing: Determining rate constant of zero order reaction First order
rate constant and half-life of reactions. Determining energy of activation of vitamin degradation
during food storage Rates of Enzymes catalyzed reaction. Microbial distraction in thermal processing
of food. Determining decimal reduction time from microbial survival data, Thermal resistance factor,
Z-values in thermal processing of food. Sampling to ensure that a lot is not contaminated with more
than a given percentage Statistical quality control. Probability of occurrence in normal distribution.
Using binomial distribution to determine probability of occurrence. Probability of defective items in a
sample obtained from large lot
UNIT III
Sensory evaluation of food Statistical descriptors of a population estimated from sensory data
obtained from a sample Analysis of variance. One factor, completely randomized design For two
factor design without replication. Use of linear regression in analyzing sensory data. Mechanical
transport of liquid food. Measuring viscosity of liquid food using a capillary tube viscometer . Solving
simultaneous equations in designing multiple effect evaporator while using matrix algebra available in
excel.
UNIT IV
Familiarization with the application of computer in some common food industries like, milk plant,
bakery units & fruits vegetable plants, stating from the receiving of raw material up to the storage &
dispatch of finished product.
UNIT V
Basic Introduction to computer aided manufacturing. Application of computers, instrumentation and
control of food machinery, inventory control, process control etc.
Recommended books:
1. Computer Applications in Food Technology: Use of Spreadsheets in Graphical, Statistical and
Process Analysis by R. Paul Singh, AP.
2. Manuals of MS Office.

3 0 0 3
(20A56501) MATERIALS CHARACTERIZATION TECHNIQUES
(Open Elective- I)
Course Objectives:
 To provide an exposure to different characterization techniques.
 To enlighten the basic principles and analysis of different spectroscopic techniques.
 To explain the basic principle of Scanning electron microscope along with its limitations and
applications.
 To identify the Resolving power and Magnification of Transmission electron microscope and
its applications.
 To educate the uses of advanced electric and magnetic instruments for characterization.
Course Outcomes: At the end of the course the student will be able
 To explain the structural analysis by X-ray diffraction.
 To understand the morphology of different materials using SEM and TEM.
 To recognize basic principles of various spectroscopic techniques.
 To study the electric and magnetic properties of the materials.
 To make out which technique can be used to analyse a material
UNIT I
Structure analysis by Powder X-Ray Diffraction: Introduction, Bragg’s law of diffraction, Intensity of
Diffracted beams, Factors affecting Diffraction, Intensities, Structure of polycrystalline Aggregates,
Determination of crystal structure, Crystallite size by Scherrer and Williamson-Hall (W-H) Methods,
Small angle X-ray scattering (SAXS) (in brief).
UNIT II
Microscopy technique -1 –Scanning Electron Microscopy (SEM)
Introduction, Principle, Construction and working principle of Scanning Electron Microscopy,
Specimen preparation, Different types of modes used (Secondary Electron and Backscatter Electron),
Advantages, limitations and applications of SEM.
UNIT III
Microscopy Technique -2 - Transmission Electron Microscopy (TEM): Construction and Working
principle, Resolving power and Magnification, Bright and dark fields, Diffraction and image
formation, Specimen preparation, Selected Area Diffraction, Applications of Transmission Electron
Microscopy, Difference between SEM and TEM, Advantage and Limitations of Transmission
Electron Microscopy.
UNIT IV
Spectroscopy techniques – Principle, Experimental arrangement, Analysis and advantages of the
spectroscopic techniques – (i) UV-Visible spectroscopy (ii) Raman Spectroscopy, (iii) Fourier
Transform infrared (FTIR) spectroscopy, (iv) X-ray photoelectron spectroscopy (XPS).
UNIT V
Electrical & Magnetic Characterization techniques: Electrical Properties analysis techniques (DC
conductivity, AC conductivity) Activation Energy, Effect of Magnetic field on the electrical
properties (Hall Effect). Magnetization measurement by induction method, Vibrating sample
Magnetometer (VSM) and SQUID.
Textbooks:
1. Material Characterization: Introduction to Microscopic and Spectroscopic Methods –Yang
Leng – John Wiley & Sons (Asia) Pvt. Ltd. 2008
2. Handbook of Materials Characterization -by Sharma S. K. - Springer
References:
1. Fundamentals of Molecular Spectroscopy – IV Ed. – Colin Neville Banwell and Elaine M.
McCash, Tata McGraw-Hill, 2008.
2. Elements of X-ray diffraction – Bernard Dennis Cullity& Stuart R Stocks, Prentice Hall, 2001 3.
Materials Characterization: Introduction to Microscopic and Spectroscopic Methods-Yang Leng- John
iley& Sons4. Characterization of Materials 2nd Edition, 3 Volumes-Kaufmann E N -John Wiley (Bp)

3 0 0 3
(20A51501) CHEMISTRY OF ENERGY MATERIALS
(Open Elective- I)
Course Objectives:
 To make the student understand basic electrochemical principles such as standard electrode
potentials, emf and applications of electrochemical principles in the design of batteries.
 To understand the basic concepts of processing and limitations of fossil fuels and Fuel cells &
their applications.
 To impart knowledge to the students about fundamental concepts of hydrogen storage in
different materials and liquification method
 Necessasity of harnessing alternate energy resources such as solar energy and its basic
concepts.
 To understand and apply the basics of calculations related to material and energy flow in the
processes.
Course Outcomes:
 Ability to perform simultaneous material and energy balances.
 Student learn about various electrochemical and energy systems
 Knowledge of solid, liquid and gaseous fuels
 To know the energy demand of world, nation and available resources to fulfill the demand
 To know about the conventional energy resources and their effective utilization
 To acquire the knowledge of modern energy conversion technologies
 To be able to understand and perform the various characterization techniques of fuels
 To be able to identify available nonconventional (renewable) energy resources and techniques
toutilize them effectively
UNIT I: Electrochemical Systems: Galvanic cell, standard electrode potential, application of EMF,
electrical double layer, dipole moments, polarization, Batteries-Lead-acid and Lithium ion batteries.
UNIT II: Fuel Cells: Fuel cell working principle, Classification of fuel cells, Polymer electrolyte
membrane (PEM) fuel cells, Solid-oxide fuel cells (SOFC), Fuel cell efficiency, Basic design of fuel
cell,.
UNIT III: Hydrogen Storage: Hydrogen Storage, Chemical and Physical methods of hydrogen
storage, Hydrogen Storage in metal hydrides, metal organic frame works (MOF), Carbon structures,
metal oxide porous structures, hydrogel storage by high pressure methods. Liquifaction method.
UNIT IV:Solar Energy: Solar energy introduction and prospects, photo voltaic (PV) technology,
concentrated solar power (CSP), Solar Fuels, Solar cells.
UNIT V: Photo and Photo electrochemical Conversions: Photochemical cells and applications of
photochemical reactions, specificity of photo electrochemical cell, advantage of photoelectron
catalytic conversions.
References:
1. Physical chemistry by Ira N. Levine
2. Essentials of Physical Chemistry, Bahl and Bahl and Tuli.
3. Inorganic Chemistry, Silver and Atkins
4. Fuel Cell Hand Book 7th Edition, by US Department of Energy (EG&G technical services and
corporation)
5. Hand book of solar energy and applications by Arvind Tiwari and Shyam.
6. Solar energy fundamental, technology and systems by Klaus Jagar et.al.
7. Hydrogen storage by Levine Klebonoff

B.Tech IV-I Sem L T P C
3 0 0 3
(20A01605) ENVIRONMENTAL ECONOMICS

(Open Elective Course - II)
Course Objectives:
• To impart knowledge on sustainable development and economics of energy
• To teach regarding environmental degradation and economic analysis of degradation
• To inculcate the knowledge of economics of pollution and their management
• To demonstrate the understanding of cost benefit analysis of environmental resources
• To make the students to understand principles of economics of biodiversity
Course Outcomes :
• The information on sustainable development and economics of energy
• The information regarding environmental degradation and economic analysis of degradation
• The identification of economics of pollution and their management
• The cost benefit analysis of environmental resources
• The principles of economics of biodiversity
UNIT I
Sustainable Development: Introduction to sustainable development - Economy-Environment inter-
linkages - Meaning of sustainable development - Limits to growth and the environmental Kuznets
curve – The sustainability debate - Issues of energy and the economics of energy – Nonrenewable
energy, scarcity, optimal resources, backstop technology, property research, externalities, and the
conversion of uncertainty.
UNIT II
Environmental Degradation: Economic significance and causes of environmental degradation - The
concepts of policy failure, externality and market failure - Economic analysis of environmental
degradation – Equi –marginal principle.
UNIT - III
Economics of Pollution: Economics of Pollution - Economics of optimal pollution, regulation,
monitoring and enforcement - Managing pollution using existing markets: Bargaining solutions –
Managing pollution through market intervention: Taxes, subsidies and permits.
UNIT IV
Cost – Benefit Analysis: Economic value of environmental resources and environmental damage -
Concept of Total Economic Value - Alternative approaches to valuation – Cost-benefit analysis and
discounting.
UNIT V
Economics of biodiversity: Economics of biodiversity conservation - Valuing individual species and
diversity of species -Policy responses at national and international levels. Economics of Climate
Change – stern Report
Textbooks:
1. An Introduction to Environmental Economics by N. Hanley, J. Shogren and B. White Oxford
University Press.(2001)
2. Blueprint for a Green Economy by D.W. Pearce, A. Markandya and E.B. Barbier Earthscan,
London.(1989)
Reference Books:
1. Environmental Economics: An Elementary Introduction by R.K. Turner, D.W. Pearce and I.
Bateman Harvester Wheatsheaft, London. (1994),
2. Economics of Natural Resources and the Environment by D.W. Pearce and R.K. Turner
Harvester Wheat sheaf, London. (1990),
3. Environmental and Resource Economics: An Introduction by Michael S. Common and
Michael Stuart 2ndEdition, Harlow: Longman.(1996),
4. Natural Resource and Environmental Economics by Roger Perman, Michael Common, Yue
Ma and James Mc Gilvray 3rdEdition, Pearson Education.(2003),

B.Tech III-II Sem L T P C
3 0 0 3
(20A02605) SMART ELECTRIC GRID
(Open Elective Course-II)
Course Objectives:
 Understand recent trends in grids, smart grid architecture and technologies
 Analyze smart substations
 Apply the concepts to design smart transmission systems
 Apply the concepts to design smart distribution systems
Course Outcomes:
 Understand trends in Smart grids, needs and roles of Smart substations
 Design and Analyze Smart Transmission systems
 Design and Analyze Smart Distribution systems
 Analyze SCADA and DSCADA systems in practical working environment
UNIT I INTRODUCTION TO SMART GRID

Working definitions of Smart Grid and Associated Concepts – Smart Grid Functions – Traditional
Power Grid and Smart Grid – New Technologies for Smart Grid – Advantages – Indian Smart Grid –
Key Challenges for Smart Grid
UNIT II SMART GRID TECHNOLOGIES

Characteristics of Smart grid, Micro grids, Definitions, Drives, benefits, types of Micro grid, building
blocks, Renewable energy resources, needs in smart grid, integration impact, integration standards,
Load frequency control, reactive power control, case studies and test beds
UNIT III SMART SUBSTATIONS

Protection, Monitoring and control devices, sensors, SCADA, Master stations, Remote terminal unit,
interoperability and IEC 61850, Process level, Bay level, Station level, Benefits, role of substations
in smart grid, Volt/VAR control equipment inside substation
UNIT IV SMART TRANSMISSION SYSTEMS

Energy Management systems, History, current technology, EMS for the smart grid, Synchro Phasor
Measurement Units (PMUs), Wide Area Monitoring Systems (WAMS), protection & Control
(WAMPC), needs in smart grid, Role of WAMPC smart grid, Drivers and benefits, Role of
transmission systems in smart grid
UNIT V SMART DISTRIBUTION SYSTEMS

DMS, DSCADA, trends in DSCADA and control, current and advanced DMSs, Voltage fluctuations,
effect of voltage on customer load, Drivers, objectives and benefits, voltage-VAR control, VAR
control equipment on distribution feeders, implementation and optimization, FDIR - Fault Detection
Isolation and Service restoration (FDIR),faults, objectives and benefits, equipment, implementation
Textbooks:
1. Stuart Borlase, Smart Grids - Infrastructure, Technology and Solutions, CRC Press, 1e, 2013
2. Gil Masters, Renewable and Efficient Electric Power System, Wiley–IEEE Press, 2e, 2013.
Reference Books:
1. A.G. Phadke and J.S. Thorp, Synchronized Phasor Measurements and their Applications,
Springer Edition, 2e, 2017.
2. T. Ackermann, Wind Power in Power Systems, Hoboken, NJ, USA, John Wiley, 2e, 2012.
1. https://onlinecourses.nptel.ac.in/noc22_ee82/preview

3 0 0 3
(20A04605) SIGNAL PROCESSING
(Open Elective Course –II)
Course objectives:
 Understand, represent and classify continuous time and discrete time signals and systems,
together with the representation of LTI systems.
 Ability to represent continuous time signals (both periodic and non-periodic) in the time
domain, sdomain and the frequency domain
 Understand the properties of analog filters, and have the ability to design Butterworth filters
 Understand and apply sampling theorem and convert a signal from continuous time to discrete
time or from discrete time to continuous time (without loss of information)
 Able to represent the discrete time signal in the frequency domain
 Able to design FIR and IIR filters to meet given specifications
Course Outcomes:
 Understand and explain continuous time and discrete time signals and systems, in time and
frequency domain
 Apply the concepts of signals and systems to obtain the desired parameter/ representation
 Analyse the given system and classify the system/arrive at a suitable conclusion
 Design analog/digital filters to meet given specifications
 Design and implement the analog filter using components/ suitable simulation tools
 Design and implement the digital filter using suitable simulation tools, and record the input
and output of the filter for the given audio signal
UNIT I
Signal Definition, Signal Classification, System definition, System classification, for both continuous
time and discrete time. Definition of LTI systems
UNIT II
Introduction to Fourier Transform, Fourier Series, Relating the Laplace Transform to Fourier
Transform, Frequency response of continuous time systems
UNIT III
Frequency response of ideal analog filters, Salient features of Butterworth filters Design and
implementation of Analog Butterworth filters to meet given specifications
UNIT IV
Sampling Theorem- Statement and proof, converting the analog signal to a digital signal. Practical
sampling. The Discrete Fourier Transform, Properties of DFT. Comparing the frequency response of
analog and digital systems.
UNIT V
Definition of FIR and IIR filters. Frequency response of ideal digital filters
Transforming the Analog Butterworth filter to the Digital IIR Filter using suitable mapping
techniques, to meet given specifications. Design of FIR Filters using the Window technique, and the
frequency sampling technique to meet given specifications Comparing the designed filter with the
desired filter frequency response
Textbooks:
1. ‘Signals and Systems’, by Simon Haykin and Barry Van Veen, Wiley.
References:
1. 'Theory and Application of Digital Signal Processing', Rabiner and Gold
2. ‘Signals and Systems’, Schaum’s Outline series
3. ‘Digital Signal Processing’, Schaum’s Outline series

3 0 0 3
(20A04701b) INTRODUCTION TO INTERNET OF THINGS
(Open Elective Course-II)
Course Objectives:
Students will understand the concepts of Internet of Things and can able to build IoT applications.
Course Outcomes:
 Understand the concepts of Internet of Things
 Identify hardware and software components of Internet of Things
 Analyze basic communication protocols
 Design IoT applications in different domain and be able to analyze their performance
UNIT 1
Introduction to IoT: Architectural overview, Design principles and needed capabilities, IoT
Applications, Sensing, Actuation, Basics of Networking, M2M and IoT Technology
Fundamentals-Devices and gateways, Data management, Business processes in IoT, Role of cloud
in IoT
UNIT II
Elements of IoT: Hardware components – computing (Arduino, Raspberry Pi), communication,
Sensing, Actuation, I/O interfaces Software Components- Programming APIs (Using
python/Arduino) for communication protocols-MQTT, Zigbee, Bluetooth, CoAP, UDP, TCP
UNIT III
Sensing and Actuation: Definition of Sensor, Sensor features, Resolution, Classes, Different types
of sensors, Actuator, Different types of Actuators, purpose of Sensors and Actuators in IoT
UNIT IV
IoT Application Development: Solution frame work for IoT Applications-Implementation of
Device integration, Data acquisition and Integration, Device data storage on cloud/local server,
Authentication, authorization of Devices
UNIT V
IoT Case Studies: IoT Case studies and mini projects based on industrial Automation,
Transportation, Agriculture, Healthcare, Home Automation.
Textbooks:
1. Vijay Madisetti, ArshdeepBahga, “Internet of Things a Hands-On- Approach”,2014.
References:
1. Dr SRN Reddy, RachitThukral and Manasi Mishra ,” Introduction to Internet of Things”: A
practical Approach” ETI Labs
2. Raj Kamal , “ Internet of Things: Architecture and Design”, McGraw Hill
3. Adrian McEwen, “Designing the Internet of Things”, Wiley Publishers, 2013

3 0 0 3
(20A05605a) PRINCIPLES OF OPERATING SYSTEMS
(Open Elective Course – II)
Course Objectives:
● Understand basic concepts and functions of operating systems
● Understand the processes, threads and scheduling algorithms.
● Expose the students with different techniques of handling deadlocks
● Provide good insight on various memory management techniques
● Explore the concept of file-system and its implementation issues
Course Outcomes:
• Demonstrate and understand of computer systems and operating systems functions
• Distinguish between process and thread and classify scheduling algorithms
• Solve synchronization and deadlock problems
• Compare various memory management schemes
• Explain file systems concepts and i/o management
UNIT I Introduction to Computer and Operating system
Computer Types, Functional Units, Basic Operational Concepts, Number Representation and Arithmetic
Operations, Character Representation, Performance, Historical Perspective, Memory Locations and
Addresses, Memory operations, Instructions and Instruction Sequencing, Addressing modes
Architecture Operating System Structure, Operations Process, Memory, Storage Management, Protection
and Security Computing Environments Operating System Services User Operating System Interface
System Calls Types System Programs OS Structure OS Generation System Boot.
UNIT II Process, Threads and Scheduling
Process Concept Scheduling Operations on Processes Cooperating Processes Inter-Process Communication
Threads - Multithreading Models -Thread Libraries- Threading Issues – Scheduling Criteria Scheduling
Algorithms Algorithm Evaluation.
UNIT III Process Synchronization and Deadlocks
The Critical-Section Problem Synchronization Hardware Mutex Locks -Semaphores Classic Problems of
Synchronization Critical Regions Monitors Deadlocks System Model Deadlock Characterization Methods
for Handling Deadlocks Deadlock Prevention Deadlock Avoidance Deadlock Detection Recovery from
Deadlock.
UNIT IV Memory Management
Introduction - Swapping Contiguous Memory Allocation Paging Segmentation- Structure of the Page Table
- Virtual Memory- Background Demand Paging Copy on Write Page Replacement Allocation of Frames
Thrashing.
UNIT V Input/ Output and Files
Overview of Mass Storage Structure - Disk Structure - Disk Scheduling and Management-File System
Interface File Concept - Access Methods -Directory and Disk Structure- Directory Implementation -
Allocation Methods- I/O Systems I/O Hardware- Application I/O Interface - Kernel I/O Subsystem.
Textbooks:
1. Carl Hamacher, ZvonkoVranesic, SafwatZaky and NaraigManjikian, Computer Organization and Embedded
Systems, Sixth Edition, Tata McGraw Hill, 2012.
2. Abraham Silberschatz, Peter B. Galvin and Greg Gagne, Operating Systems Concepts, Ninth Edition,
Wiley,2012.
Reference Books:
1. William Stallings, Operating Systems: Internals and Design Principles, Ninth Edition, Prentice-Hall, 2018.
2. Andrew Tanenbaum, Modern Operating Systems, Third Edition, Prentice Hall, 2009.
http://peterindia.net/OperatingSystems.html

3 0 0 3
(20A05605b) FOUNDATIONS OF MACHINE LEARNING
Open Elective Course– II
Course Objectives:
 Acquire theoretical knowledge on setting hypothesis for pattern recognition.
 Apply suitable machine learning techniques for data handling and to gain knowledge from
it.
 Evaluate the performance of algorithms and to provide solution for various real-world
applications.
• Understand the characteristics of machine learning strategies.
• Apply various supervised learning methods to appropriate problems.
• Identify and integrate more than one technique to enhance the performance of
learning.
• Create probabilistic and unsupervised learning models for handling unknown
pattern.
• Analyse the co-occurrence of data to find interesting frequent patterns.
• Pre-process the data before applying to any real-world problem and can evaluate its
performance
UNIT - I Introduction to Machine Learning Lecture 8Hrs
What is machine learning, learning associations, classification, regression, unsupervised learning,
reinforcement learning
Supervised Learning: learning a class from examples, learning multiple classes, model selection
and generalization
UNIT - II Parametric, Non-Parametric methods Lecture 9Hrs
Parametric Methods: Introduction, maximum likelihood estimation, evaluating an estimator,
parametric classification, regression, model selection procedures
Nonparametric Methods: Introduction, nonparametric density estimation: histogram estimator,
kernel estimator, k-nearest neighbour estimator
UNIT - III Multivariate Methods Lecture 9Hrs
Multivariate Methods: Multivariate data, parameter estimation, estimation of missing values,
multivariate normal distribution, multi variate classification
UNIT - IV Dimensionality Reduction, Clustering Lecture 8Hrs
Dimensionality Reduction: Introduction, subset selection, principal component analysis, singular
value decomposition and matrix factorization
Clustering: Mixture densities, k-means clustering, expectation-maximization algorithm, mixtures
of latent variables
UNIT - V Deep Learning Lecture 8Hrs
Deep Learning: Introduction, train multiple hidden layers, improving training convergence,
regularization, convolution layers, tuning the network structure, learning sequences.
Textbooks:
1. EthemAlpaydin, Introduction to Machine Learning, Fourth Edition, MIT Press, Fourth
Edition, 2020
2. MehryarMohri, Afshin Rostamizadeh, Ameet Talwalkar "Foundations of Machine
Learning”, MIT Press, 2012
Reference Books:
1. Marc Peter Deisenroth, A. Aldo Faisal, Cheng Soon Ong, “Mathematics for Machine
Learning”, Cambridge University Press, 2019.
2. Stephen Marsland, “Machine Learning – An Algorithmic Perspective”, 2nd Edition, CRC
Press, 2015.
3. Charu C. Aggarwal, “Data Classification Algorithms and Applications”, CRC Press, 2014.

1. https://bloomberg.github.io/foml/
2. https://d1rkab7tlqy5f1.cloudfront.net/EWI/Over%20de%20faculteit/Afdelingen/Intelligent
%20Systems/Pattern%20Recognition%20Laboratory/PR/Reading%20Group/Foundations
_of_Machine_Learning.pdf

B.Tech (IT)– III-II Sem L T P C
3 0 0 3
(20A05605c) DATA ANALYTICS USING R

(Open Elective-II)
Course Objectives:
 Facilitate students to understand R programming
 Help students to gain a basic understanding of Data Analytics
 Inculcate working knowledge of plotting
Course Outcomes:
• Identify and execute basic syntax and programs in R
• Perform the Matrix operations using R built in functions
• Apply nonnumeric values in vectors
• Create the list and data frames
• Exploit the graph using ggplot2.
UNIT I Introduction to R Programming
History and Overview of R- Basic Features of R-Design of the R System- Installation of R- Console
and Editor Panes- Comments- Installing and Loading R Packages- Help Files and Function
Documentation-Saving Work and Exiting R- Conventions- R for Basic Math- Arithmetic- Logarithms
and Exponentials - E-Notation - Assigning Objects – Vectors - Creating a Vector-Sequences,
Repetition, Sorting and Lengths – Subsetting and Element Extraction -Vector – Oriented Behavior.
UNIT II Matrices and Arrays
Defining a Matrix – Defining a Matrix- Filling Direction- Row and Column Bindings- Matrix
Dimensions-Subsetting- Row, Column, and Diagonal Extractions- Omitting and Overwriting- Matrix
Operations and Algebra- Matrix Transpose- Identity Matrix- Matrix Addition and Subtraction- Matrix
Multiplication-Matrix Inversion-Multidimensional Arrays-Subsets, Extractions and Replacements.
UNIT III Non-Numeric values
Logical Values- Relational Operators- Characters- Creating a String- Concatenation- Escape
Sequences-Substrings and Matching- Factors- Identifying Categories- Defining and Ordering Levels-
Combining and Cutting.
UNIT IV Lists and Data frames
List of Objects - Component Access – Naming – Nesting - Data Frames - Adding Data Columns and
Combining Data Frames – Logical Record Subsets – Some Special Values – Infinity – NaN – NA -
NULL – Attributes – Object - Class-Is-Dot Object-Checking Functions-As-Dot Coercion Functions
UNIT V Basic Plotting
Using plot with Coordinate Vectors-Graphical Parameters-Automatic Plot Types-Title and Axis
Labels-Color-Line and Point Appearances-Plotting Region Limits-Adding Points, Lines, and Text to
an ExistingPlot-ggplot2 Package-Quick Plot with qplot-Setting Appearance Constants with Geoms—
Reading and Writing Files- R-Ready Data Sets- Contributed Data Sets- Reading in External Data
Files- Writing Out Data Files and Plots-AdHoc Object Read/Write Operations
Textbooks:
1. Tilman M. Davies, “The Book of R-A First Programming, Statistics” Library of Congress
Cataloging-in-Publication Data, 2016.
Reference Books:
1. Hadley Wickham, Garrett Grolemund,”R for Data Science”,Oreilly Publication,2017.
2. Roger D. Peng, “R Programming for Data Science” Lean Publishing, 2016.
3. Steven Keller, “R ProgrammingforBeginners”,CreateSpaceIndependentPublishingPlatform2016.
1. https://www.coursera.org/learn/data-analysis-r
2. https://www.careers360.com/courses-certifications/data-analysis-with-r-courses-brpg

3 0 0 3
(20A27605) FOOD REFRIGERATION AND COLD CHAIN MANAGEMENT
OPEN ELECTIVE II
Course Objectives:
 To know the equipment available to store perishable items for a long time
 To understand to increase the storage life of food items
Course Outcomes
By the end of the course, the students will
 Understand various principles and theories involved in refrigeration systems
 Understand the different equipment useful to store the food items for a long period.
 Understand how to increase the storage life of food items
UNIT I
Principles of refrigeration: Definition, background with second law of thermodynamics, unit of
refrigerating capacity, coefficient of performance; Production of low temperatures: Expansion of a
liquid with flashing, reversible/ irreversible adiabatic expansion of a gas/ real gas, thermoelectric
cooling, adiabatic demagnetization; Air refrigerators working on reverse Carnot cycle: Carnot cycle,
reversed Carnot cycle, selection of operating temperatures;
UNIT II
Air refrigerators working on Bell Coleman cycle: Reversed Brayton or Joule or Bell Coleman cycle,
analysis of gas cycle, polytropic and multistage compression; Vapour refrigeration: Vapor as a
refrigerant in reversed Carnot cycle with p-V and T-s diagrams, limitations of reversed Carnot cycle;
Vapour compression system: Modifications in reverse Carnot cycle with vapour as a refrigerant (dry
vs wet compression, throttling vs isentropic expansion), representation of vapor compression cycle on
pressure- enthalpy diagram, super heating, sub cooling;
UNIT III
Liquid-vapour regenerative heat exchanger for vapour compression system, effect of suction vapour
super heat and liquid sub cooling, actual vapour compression cycle; Vapour-absorption refrigeration
system: Process, calculations, maximum coefficient of performance of a heat operated refrigerating
machine, Common refrigerants and their properties: classification, nomenclature, desirable properties
of refrigerants- physical, chemical, safety, thermodynamic and economical; Azeotropes; Components
of vapour compression refrigeration system, evaporator, compressor, condenser and expansion valve;
UNIT IV
Ice manufacture, principles and systems of ice production, Treatment of water for making ice, brines,
freezing tanks, ice cans, air agitation, quality of ice; Cold storage: Cold store, design of cold storage
for different categories of food resources, size and shape, construction and material, insulation, vapour
barriers, floors, frost-heave, interior finish and fitting, evaporators, automated cold stores, security of
operations; Refrigerated transport: Handling and distribution, cold chain, refrigerated product
handling, order picking, refrigerated vans, refrigerated display;
UNIT V
Air-conditioning: Meaning, factors affecting comfort air-conditioning, classification, sensible heat
factor, industrial air-conditioning, problems on sensible heat factor; Winter/summer/year round air-
conditioning, unitary air-conditioning systems, central air-conditioning, physiological principles in
air-conditioning, air distribution and duct design methods; design of complete air-conditioning
systems; humidifiers and dehumidifiers; Cooling load calculations: Load sources, product cooling,
conducted heat, convicted heat, internal heat sources, heat of respiration, peak load; etc.
Textbooks:
1. Arora, C. P. “Refrigeration and Air Conditioning”. Tata MC Graw Hill Publishing Co.Ltd.,
New Delhi. 1993.
References:
1. Adithan, M. and Laroiya, S. C. “Practical Refrigeration and Air Conditioning”. Wiley Estern
Ltd., New Delhi 1991

3 0 0 3
(20A54701) WAVELET TRANSFORMS AND ITS APPLICATIONS
(Open Elective-II)
Course Objectives:
This course provides the students to understand Wavelet transforms and its applications.
Course Outcomes:
 Understand wavelets and wavelet expansion systems.
 Illustrate the multi resolution analysis ad scaling functions.
 Form fine scale to coarse scale analysis.
 Find the lattices and lifting.
 Perform numerical complexity of discrete wavelet transforms.
 Find the frames and tight frames using fourier series.
UNIT I Wavelets
Wavelets and Wavelet Expansion Systems - Wavelet Expansion- Wavelet Transform- Wavelet
System- More Specific Characteristics of Wavelet Systems -Haar Scaling Functions and Wavelets -
effectiveness of Wavelet Analysis -The Discrete Wavelet Transform the Discrete-Time and
Continuous Wavelet Transforms.
UNIT II A Multiresolution Formulation of Wavelet Systems

Signal Spaces -The Scaling Function -Multiresolution Analysis - The Wavelet Functions - The
Discrete Wavelet Transform- A Parseval's Theorem - Display of the Discrete Wavelet Transform and
the Wavelet Expansion.
UNIT III Filter Banks and the Discrete Wavelet Transform

Analysis - From Fine Scale to Coarse Scale- Filtering and Down-Sampling or Decimating -Synthesis
- From Coarse Scale to Fine Scale -Filtering and Up-Sampling or Stretching - Input Coefficients -
Lattices and Lifting - -Different Points of View.
UNIT IV Time-Frequency and Complexity

Multiresolution versus Time-Frequency Analysis- Periodic versus Nonperiodic Discrete Wavelet
Transforms -The Discrete Wavelet Transform versus the Discrete-Time Wavelet Transform-
Numerical Complexity of the Discrete Wavelet Transform.
UNIT V Bases and Matrix Examples

Bases, Orthogonal Bases, and Biorthogonal Bases -Matrix Examples - Fourier Series Example - Sine
Expansion Example - Frames and Tight Frames - Matrix Examples -Sine Expansion as a Tight
Frame Example.
Textbooks:
1. C. Sidney Burrus, Ramesh A. Gopinath, “Introduction to Wavelets and Wavelets
Transforms”,Prentice Hall, (1997).
2. James S. Walker, “A Primer on Wavelets and their Scientific Applications”, CRC Press,
(1999).
Reference Books:
1. Raghuveer Rao, “Wavelet Transforms”, Pearson Education, Asia.

https://www.slideshare.net/RajEndiran1/introduction-to-wavelet-transform-51504915

3 0 0 3
(20A56701) PHYSICS OF ELECTRONIC MATERIALS AND DEVICES
(Open Elective-II)
Course Objectives:
 To impart the fundamental knowledge on various materials, their properties and applications.
 To provide insight into various semiconducting materials, and their properties.
 To enlighten the characteristic behavior of various semiconductor devices.
 To provide the basics of dielectric and piezoelectric materials and their properties.
 To explain different categories of magnetic materials, mechanism and their advanced
applications.
Course Outcome: At the end of the course the student will be able
 To understand the fundamentals of various materials.
 To exploit the physics of semiconducting materials
 To familiarize with the working principles of semiconductor-based devices.
 To understand the behaviour of dielectric and piezoelectric materials.
 To identify the magnetic materials and their advanced applications.
UNIT I Fundamentals of Materials Science
Introduction, Phase rule, Phase Diagram, Elementary idea of Nucleation and Growth, Methods of
crystal growth. Basic idea of point, line and planar defects. Concept of thin films, preparation of thin
films, Deposition of thin film using sputtering methods (RT and glow discharge).
UNIT II Semiconductors
Introduction, charge carriers in semiconductors, effective mass, Diffusion and drift, Diffusion and
recombination, Diffusion length. The Fermi level & Fermi-Dirac distribution, Electron and Hole in
quantum well, Change of electron-hole concentration- Qualitative analysis, Temperature dependency
of carrier concentration, Conductivity and mobility, Effects of temperature and doping on mobility,
High field effects.
UNIT III Physics of Semiconductor devices
Introduction, Band structure, PN junctions and their typical characteristics under equilibrium and
under bias, Construction and working principles of: Light emitting diodes, Heterojunctions,
Transistors, FET and MOSFETs.
UNIT IV Dielectric Materials and their applications:
Introduction, Dielectric properties, Electronic polarizability and susceptibility, Dielectric constant and
frequency dependence of polarization, Dielectric strength and dielectric loss, Piezoelectric properties.
UNIT V Magnetic Materials and their applications
Introduction, Magnetism & various contributions to para and dia magnetism, Ferro and Ferri
magnetism and ferrites, Concepts of Spin waves and Magnons, Anti-ferromagnetism, Domains and
domain walls, Coercive force, Hysteresis, Nano-magnetism, Super-paramagnetism – Properties and
applications.
Textbooks
1. Principles of Electronic Materials and Devices- S.O. Kasap, McGraw-Hill Education (India)
Pvt. Ltd., 3rd edition, 2007.
2. Electronic Components and Materials- Grover and Jamwal, Dhanpat Rai and Co.
Reference Books:
1. Solid State Electronic Devices -B.G. Streetman and S. Banerjee, PHI Learning, 6th edition
2. Electronic Materials Science- Eugene A. Irene, , Wiley, 2005
3. An Introduction to Electronic Materials for Engineers-Wei Gao, Zhengwei Li, Nigel Sammes,
World Scientific Publishing Co. Pvt. Ltd., , 2nd Edition,2011
4. A First Course In Material Science- by Raghvan, McGraw Hill Pub.
5. The Science and Engineering of materials- Donald R.Askeland, Chapman& Hall Pub.
NPTEL courses links: https://nptel.ac.in/courses/113/106/113106062/,
https://onlinecourses.nptel.ac.in/noc20_mm02/preview,
https://nptel.ac.in/noc/courses/noc17/SEM1/noc17-mm07

3 0 0 3
(20A51701) CHEMISTRY OF POLYMERS AND ITS APPLICATIONS

Course Objectives:
• To understand the basic principles of polymers
• To synthesize the different polymeric materials and their characterization by various
instrumental methods.
• To impart knowledge to the students about fundamental concepts of Hydro gels of polymer
networks, surface phenomenon by micelles
• To enumerate the applications of polymers in engineering
Course Outcome
• At the end of the course, the student will be able to:
• Understand the state of art synthesis of Polymeric materials
• Understand the hydro gels preparation, properties and applications in drug delivery system.
• Characterize polymers materials using IR, NMR, XRD.
• Analyze surface phenomenon fo micelles and characterise using photoelectron spectroscopy,
ESCA and Auger spectroscopy
UNIT I : Polymers-Basics and Characterization
Basic concepts: monomers, repeat units, degree of polymerization, linear, branched and network
polymers, classification of polymers, Polymerization: condensation, addition, radical chain, ionic and
coordination and copolymerization. Average molecular weight concepts: number, weight and
viscosity average molecular weights, polydispersity and molecular weight distribution Measurement
of molecular weight: end group, viscosity, light scattering, osmotic and ultracentrifugation methods,
analysis and testing of polymers.
Unit II : Synthetic Polymers

Addition and condensation polymerization processes – Bulk, Solution, Suspension and Emulsion
polymerization.
Preparation and significance, classification of polymers based on physical properties, Thermoplastics,
Thermosetting plastics, Fibers and elastomers, General Applications.
Preparation of Polymers based on different types of monomers, Olefin polymers, Diene polymers,
nylons, Urea - formaldehyde, phenol - formaldehyde and melamine Epoxy and Ion exchange resins.
Characterization of polymers by IR, NMR, XRD.
UNIT III : Natural Polymers & Modified cellulosics

Natural Polymers: Chemical & Physical structure, properties, source, important chemical
modifications, applications of polymers such as cellulose, lignin, starch, rosin, shellac, latexes,
vegetable oils and gums, proteins.
Modified cellulosics: Cellulose esters and ethers such as Ethyl cellulose, CMC, HPMC, cellulose
acetals, Liquid crystalline polymers; specialty plastics- PES, PAES, PEEK, PEAK.
Learning Outcomes:
UNIT IV: Hydrogels of Polymer networks and Drug delivery

Definitions of Hydrogel, polymer networks, Types of polymer networks, Methods involved in
hydrogel preparation, Classification, Properties of hydrogels, Applications of hydrogels in drug
delivery.
Introduction to drug systems including, drug development, regulation, absorption and disposition,
routes of administration and dosage forms. Advanced drug delivery systems and controlled release.
UNIT V : Surface phenomena

Surface tension, adsorption on solids, electrical phenomena at interfaces including electrokinetics,

micelles, reverse micelles, solubilization. Application of photoelectron spectroscopy, ESCA and
Auger spectroscopy to the study of surfaces.
References :
1. A Text book of Polymer science, Billmayer
2. Organic polymer Chemistry, K.J.Saunders, Chapman and Hall
3. Advanced Organic Chemistry, B.Miller, Prentice Hall
4. Polymer Chemistry – G.S.Mishra
5. Polymer Chemistry – Gowarikar
6. Physical Chemistry –Galston
7. Drug Delivery- Ashim K. Misra

3 0 0 3
(20A01704) COST EFFECTIVE HOUSING TECHNIQUES

(Open Elective Course - III)
Course Objectives:
• To understand the requirements of structural safety for future construction.
• To know about the housing scenario, housing financial systems land use and physical
• planning for housing and housing the urban poor
• To know the traditional practices of rural housing
• To know the different innovative cost effective construction techniques
• To know the alternative building materials for low cost housing.
Course Outcomes :
• To know the repair and restore action of earthquake damaged non engineered buildings and
ability to understand the requirements of structural safety for future construction
• To know about the housing scenario, housing financial systems land use and physical
planning for housing and housing the urban poor
• Apply the traditional practices of rural housing
• Understand the different innovative cost effective construction techniques
• Suggest the alternative building materials for low cost housing
UNIT I
a) Housing Scenario :Introducing - Status of urban housing - Status of Rural Housing
b) Housing Finance: Introducing - Existing finance system in India - Government role as
facilitator - Status at Rural Housing Finance - Impedimently in housing finance and related
issues
c) Land use and physical planning for housing :Introduction - Planning of urban land -
Urban land ceiling and regulation act - Efficiency of building bye lass - Residential
Densities
d) Housing the urban poor :Introduction - Living conditions in slums - Approaches and
strategies for housing urban poor
UNIT II
Development and adoption of low cost housing technology
Introduction - Adoption of innovative cost effective construction techniques - Adoption of precast
elements in partial prefatroices - Adopting of total prefactcation of mass housing in India- General
remarks on pre cast rooting/flooring systems -Economical wall system - Single Brick thick loading
bearing wall - 19cm thick load bearing masonry walls - Half brick thick load bearing wall – Fly-ash
gypsum thick for masonry - Stone Block masonry - Adoption of precast R.C. plank and join system
for roof/floor in the building
UNIT III
Alternative building materials for low cost housing
Introduction - Substitute for scarce materials – Ferro-cement - Gypsum boards - Timber substitutions
- Industrial wastes - Agricultural wastes - alternative building maintenance
Low cost Infrastructure services:
Introduce - Present status - Technological options - Low cost sanitation - Domestic wall - Water
supply, energy
UNIT IV
Rural Housing: Introduction traditional practice of rural housing continuous - Mud Housing
technology Mud roofs - Characteristics of mud - Fire treatment for thatch roof - Soil stabilization -
Rural Housing programs
UNIT V
Housing in Disaster prone areas:
Introduction – Earthquake - Damages to houses - Traditional prone areas - Type of Damages and
Railways of non-engineered buildings - Repair and restore action of earthquake Damaged non-
engineered buildings recommendations for future constructions. Requirement’s of structural safety of
thin precast roofing units against Earthquake forces Status of R& D in earthquake strengthening
measures - Floods, cyclone, future safety
Textbooks:
1. Building materials for low – income houses – International council for building research
studies and documentation.
2. Hand book of low cost housing by A.K.Lal – Newage international publishers.
3. Low cost Housing – G.C. Mathur by South Asia Books
Reference Books:
1. Properties of concrete – Neville A.m. Pitman Publishing Limited, London.
2. Light weight concrete, Academic Kiado, Rudhai.G – Publishing home of Hungarian
Academy of Sciences 1963.
3. Modern trends in housing in developing countries – A.G. Madhava Rao, D.S. Rama chandra
Murthy &G.Annamalai. E. & F. N. Spon Publishers

3 0 0 3
(20A02704) IoT APPLICATIONS IN ELECTRICAL ENGINEERING
(Open Elective Course – III)
Course Objectives:
 Understand basics of Internet of Things and Micro Electro Mechanical Systems (MEMS)
fundamentals in design and fabrication process
 Analyze motion less and motion detectors in IoT applications
 Understand about Analyze applications of IoT in smart grid
 Apply the concept of Internet of Energy for various applications
Course Outcomes:
 Understand the concept of IoT in Electrical Engineering
 Analyze various types of motionless sensors and various types of motion detectors
 Apply various applications of IoT in smart grid
 Design future working environment with Energy internet
UNIT I SENSORS
Definitions, Terminology, Classification, Temperature sensors, Thermoresistive, Resistance,
temperature detectors, Silicon resistive thermistors, Semiconductor, Piezoelectric, Humidity and
moisture sensors. Capacitive, Electrical conductivity, Thermal conductivity, time domain
reflectometer, Pressure and Force sensors: Piezoresistive, Capacitive, force, strain and tactile sensors,
Strain gauge, Piezoelectric
UNIT II OCCUPANCY AND MOTION DETECTORS
Capacitive occupancy, Inductive and magnetic, potentiometric - Position, displacement and level
sensors, Potentiometric, Capacitive, Inductive, magnetic velocity and acceleration sensors,
Capacitive, Piezoresistive, piezoelectric cables, Flow sensors, Electromagnetic, Acoustic sensors -
Resistive microphones, Piezoelectric, Photo resistors
UNIT III MEMS
Basic concepts of MEMS design, Beam/diaphragm mechanics, electrostatic actuation and
fabrication, Process design of MEMS based sensors and actuators, Touch sensor, Pressure sensor, RF
MEMS switches, Electric and Magnetic field sensors
UNIT IV IoT FOR SMART GRID
Driving factors, Generation level, Transmission level, Distribution level, Applications, Metering and
monitoring applications, Standardization and interoperability, Smart home
UNIT V INTERNET of ENERGY (IoE)
Concept of Internet of Energy, Evaluation of IoE concept, Vision and motivation of IoE,
Architecture, Energy routines, information sensing and processing issues, Energy internet as smart
grid
Textbooks:
1. Jon S. Wilson, Sensor Technology Hand book, Newnes Publisher, 2004
2. Tai Ran Hsu, MEMS and Microsystems: Design and manufacture, 1 st Edition, Mc Grawhill
Education, 2017
3. Ersan Kabalci and Yasin Kabalci, From Smart grid to Internet of Energy, 1 st Edition,
Academic Press, 2019
Reference Books:
1. Raj Kumar Buyya and Amir Vahid Dastjerdi, Internet of Things: Principles and Paradigms,
Kindle Edition, Morgan Kaufmann Publisher, 2016
2. Yen Kheng Tan and Mark Wong, Energy Harvesting Systems for IoT Applications:
Generation, Storage and Power Management, 1st Edition, CRC Press, 2019
3. RMD Sundaram Shriram, K. Vasudevan and Abhishek S. Nagarajan, Internet of Things,
Wiley, 2019

1.https://onlinecourses.nptel.ac.in/noc22_cs96/preview
2. https://nptel.ac.in/courses/108108123

3 0 0 3
(20A04704) ELECTRONIC SENSORS
(Open Elective Course –III)
Course Objectives:
 Learn the characterization of sensors.
 Known the working of Electromechanical, Thermal, Magnetic and radiation sensors
 Understand the concepts of Electro analytic and smart sensors
 Able to use sensors in different applications
Course Outcomes:
 Learn about sensor Principle, Classification and Characterization.
 Explore the working of Electromechanical, Thermal, Magnetic, radiation and Electro analytic
sensors
 Understand the basic concepts of Smart Sensors
 Design a system with sensors
UNIT I
Sensors / Transducers: Principles, Classification, Parameters, Characteristics, Environmental
Parameters (EP), Characterization
Electromechanical Sensors: Introduction, Resistive Potentiometer, Strain Gauge, Resistance Strain
Gauge, Semiconductor Strain Gauges -Inductive Sensors: Sensitivity and Linearity of the Sensor –
Types-Capacitive Sensors: Electrostatic Transducer, Force/Stress Sensors Using Quartz Resonators,
Ultrasonic Sensors
UNIT II
Thermal Sensors: Introduction, Gas thermometric Sensors, Thermal Expansion Type Thermometric
Sensors, Acoustic Temperature Sensor ,Dielectric Constant and Refractive Index thermo sensors,
Helium Low Temperature Thermometer ,Nuclear Thermometer ,Magnetic Thermometer ,Resistance
Change Type Thermometric Sensors, Thermo emf Sensors, Junction Semiconductor Types, Thermal
Radiation Sensors, Quartz Crystal Thermoelectric Sensors, NQR Thermometry, Spectroscopic
Thermometry, Noise Thermometry, Heat Flux Sensors
UNIT III
Magnetic sensors: Introduction, Sensors and the Principles Behind, Magneto-resistive Sensors,
Anisotropic Magneto resistive Sensing, Semiconductor Magneto resistors, Hall Effect and Sensors,
Inductance and Eddy Current Sensors, Angular/Rotary Movement Transducers, Synchros.
UNIT IV
Radiation Sensors: Introduction, Basic Characteristics, Types of Photo resistors/ Photo detectors,
Xray and Nuclear Radiation Sensors, Fibre Optic Sensors
Electro analytical Sensors: The Electrochemical Cell, The Cell Potential - Standard Hydrogen
Electrode (SHE), Liquid Junction and Other Potentials, Polarization, Concentration Polarization,
Reference Electrodes, Sensor Electrodes, Electro ceramics in Gas Media.
UNIT V
Smart Sensors: Introduction, Primary Sensors, Excitation, Amplification, Filters, Converters,
Compensation, Information Coding/Processing - Data Communication, Standards for Smart Sensor
Interface, the Automation Sensors –Applications: Introduction, On-board Automobile Sensors
(Automotive Sensors), Home Appliance Sensors, Aerospace Sensors, Sensors for Manufacturing –
Sensors for environmental Monitoring
Textbooks:
1. “Sensors and Transducers - D. Patranabis” –PHI Learning Private Limited., 2003.
2. Introduction to sensors- John veteline, aravindraghu, CRC press, 2011
References: 1. Make sensors: Terokarvinen, kemo, karvinen and villeyvaltokari, 1st edition, maker
media,2014.
Sensors handbook- Sabriesoloman, 2nd Ed. TMH, 2009

3 0 0 3
(20A05704a) WEB TECHNOLOGIES
(Open Elective-III)
Course Objectives:
The course is designed to Introduce the key technologies that have been developed as part of the birth and
maturation of the World Wide Web.
Course Outcomes:
 Understand the Web essentials.
 Develop web pages using XHTML
 Apply style to web pages using CSS
 Write scripts for client side
 Develop and transform XML documents.
UNIT I Web Essentials: Clients, Servers, and Communication

The Internet, Basic Internet protocols, WWW, HTTP request message, HTTP response message, Web
clients, Web Servers, Case study.
UNIT II Markup Languages: XHTML 1.0

An introduction to HTML, Basic XHTML syntax and semantics, fundamental HTML elements, Relative
URLs, Lists, Tables, Frames, Forms, Defining XHTML’s abstract syntax, Creating HTML documents.
UNIT III Cascading Style Sheets

Introduction, features, core syntax, style sheets and HTML, style rule cascading and inheritance, text
properties, Box model, normal flow box layout, beyond the normal flow, lists, tables, cursor styles.
UNIT IV Client-side programming: JavaScript

Basic syntax, variables and data types, statements, operators, literals, functions, objects, Arrays, built-in
objects, JavaScript debuggers.
UNIT V Representing Web Data: XML

Documents and vocabularies, Versions and declaration, Namespaces, Ajax, DOM and SAX parsers,
transforming XML documents, XPath, XSLT, Displaying XML documents in Web browsers.
Textbooks:
1. J.C. Jackson, Web technologies: A computer science perspective, Pearson.
Reference Books:
1. Sebesta, Programming world wide web, Pearson.
2. Dietel and Nieto , Internet and World Wide Web – How to program, Pearson Education
3. Chris Bates , Web Programming, building internet applications, 2nd edition, WILEY, Dreamtech
http://getbootstrap.com/
https://www.w3schools.com/whatis/

3 0 0 3
(20A05704b) VR & AR FOR ENGINEERS
Course Objectives:
 Introduce to the design of visualization tools
 Demonstrate Virtual reality
 Learn Virtual reality animation and 3D Art optimization
 Understand the foundational principles describing how hardware, computer vision algorithms
function
 Explore the history of spatial computing and design interactions
Course Outcomes:
 Apply VR/MR/AR in various fields in industry
 Design Data visualization tools
 Design audio and video interaction paradigms
 Apply technical and creative approaches to make successful applications and experiences.
 Explain how the humans interact with computers
UNIT I
Computer generated worlds: what is augmented reality? what is virtual reality?
Understanding virtual space: defining visual space and content, defining position and orientation in
three dimensions, navigation
The Mechanics of Sight: the visual path way, spatial vision, and Depth Cues.
Component Technologies of Head mounted Displays: Display fundamentals, related terminology
and concepts, optical Architectures.
UNIT II
Augmented Displays: Binocular augmenting displays, Monocular augmenting displays.
Fully immersive Displays: PC-Console driven displays, smartphone based displays, CAVES and
Walls, Hemispheres and Domes.
The Mechanics of hearing: Defining sound, the auditory pathway, sound cues and localization, the
vestibular system.
Audio displays: Conventional audio
UNIT III
The Mechanics of Feeling: The Science of feeling, Anatomy and Composition of the skin.
Tactile and force feedback Devices:Haptic illusions, tactile feedback devices, Force feedback
devices.
Sensors for tracking Position, and orientation and motion: introduction to sensor technologies,
optical trackers, beacon trackers,electromagnetic trackers, inertial sensors, acoustic sensors.
Devices to enable navigation and interaction: 2D vs 3D interaction and navigation, the importance
of a manual interface, hand and gesture tracking, whole body tracking, gaming and entertainment
interfaces, navigating with your mind.
UNIT IV
Gaming and Entertainment:Virtual reality and the arts, gaming, immersive video/ cinematic virtual
reality.
Architecture and Construction:Artificial spaces, architectural design: Manage group architectures,
Construction management, real estate sales applications, architectural acoustics.
Science and engineering: Simulate and innovate, naval architecture and marine engineering,
automotive engineering, aerospace engineering, nuclear engineering and manufacturing.
Health and medicine: advancing the field of medicine, training applications, treatment applications.
UNIT V
Aerospace and Defence: Flight simulation and training, mission planning and rehearsal, dismounted
soldier situational awareness, advanced cockpit avionics, space operations.
Education: Tangible skills education, theory, knowledge acquisition and concept formation.
Information control and big data visualization: What is big data?, big data analytics and human
vision.
Telerobotics and Telepresence: Defining Telerobotics and Telepresence, space applications and
robonaut, undersea applications, Terrestrial and airborne applications.
Textbooks:
1. Steve Aukstakalnis, “Practical Augmented Reality”, Pearson Education, 2017.
Reference Books:
1. 1. Erin Pangilinan, Steve lukas, and Vasanth Mohan, “Creating Augmented& Virtual Realities”,
O’REILLY

1. https://www.coursera.org/learn/intro-augmented-virtual-mixed-extended-reality-technologies-
applications-issues
2. https://www.coursera.org/learn/ar

3 0 0 3
(20A05704c) SOFTWARE ENGINEERING
Course Objectives:
 To learn the basic concepts of software engineering and life cycle models
 To explore the issues in software requirements specification and enable to write SRS
documents for software development problems
 To elucidate the basic concepts of software design and enable to carry out procedural and
object oriented design of software development problems
 To understand the basic concepts of black box and white box software testing and enable to
design test cases for unit, integration, and system testing
 To reveal the basic concepts in software project management
 Obtain basic software life cycle activity skills.
 Design software requirements specifications for given problems.
 Implement structure, object oriented analysis and design for given problems.
 Design test cases for given problems.
 Apply quality management concepts at the application level.
UNIT - I Basic concepts in software engineering and software Lecture 8Hrs
project management
Basic concepts: abstraction versus decomposition, evolution of software engineering techniques,
Software development life cycle (SDLC) models: Iterative waterfall model, Prototype model,
Evolutionary model, Spiral model, RAD model, Agile models, software project management: project
planning, project estimation, COCOMO, Halstead’s Software Science, project scheduling, staffing,
Organization and team structure, risk management, configuration management.
UNIT - II Requirements analysis and specification Lecture 8Hrs
The nature of software, The Unique nature of Webapps, Software Myths, Requirements gathering
and analysis, software requirements specification, Traceability, Characteristics of a Good SRS
Document, IEEE 830 guidelines, representing complex requirements using decision tables and
decision trees, overview of formal system development techniques, axiomatic specification, algebraic
specification.
UNIT - III Software Design Lecture 9Hrs
Good Software Design, Cohesion and coupling, Control Hierarchy: Layering, Control Abstraction,
Depth and width, Fan-out, Fan-in, Software design approaches, object oriented vs. function oriented
design. Overview of SA/SD methodology, structured analysis, Data flow diagram, Extending DFD
technique to real life systems, Basic Object oriented concepts, UML Diagrams, Structured design,
Detailed design, Design review, Characteristics of a good user interface, User Guidance and Online
Help, Mode-based vs Mode-less Interface, Types of user interfaces, Component-based GUI
development, User interface design methodology: GUI design methodology.
UNIT - IV Coding and Testing Lecture 9Hrs
Coding standards and guidelines, code review, software documentation, Testing, Black Box Testing,
White Box Testing, debugging, integration testing, Program Analysis Tools, system testing,
performance testing, regression testing, Testing Object Oriented Programs.
UNIT - V Software quality, reliability, and other issues Lecture 9Hrs
Software reliability, Statistical testing, Software quality and management, ISO 9000, SEI capability
maturity model (CMM), Personal software process (PSP), Six sigma, Software quality metrics,
CASE and its scope, CASE environment, CASE support in software life cycle, Characteristics of
software maintenance, Software reverse engineering, Software maintenance processes model,
Estimation maintenance cost. Basic issues in any reuse program, Reuse approach, Reuse at
organization level.
Textbooks:
1. Rajib Mall, “Fundamentals of Software Engineering”, 5th Edition, PHI, 2018.

2. Pressman R, “Software Engineering- Practioner Approach”, McGraw Hill.
Reference Books:
1. Somerville, “Software Engineering”, Pearson 2.
2. Richard Fairley, “Software Engineering Concepts”, Tata McGraw Hill.
3. JalotePankaj, “An integrated approach to Software Engineering”, Narosa
http://peterindia.net/SoftwareDevelopment.html

3 0 0 3
(20A27704) HUMAN NUTRITION
(OPEN ELECTIVE-III)
Course Objectives:
 To get knowledge on Concepts and content of nutrition source and metabolic functions.
 To know about Balanced diets for various groups; Diets and disorders, recommended dietary
allowances
 To learn about Epidemiology of under nutrition and over nutrition.
 To understand Nutrition and immunity.
Course Outcomes:
 To study the Salient features of Concepts and content of nutrition, Malnutrition, Nutrition
education
 Assessment of nutritional status, disorders Food fad and faddism.
UNIT I
Concepts and content of nutrition: Nutrition agencies; Nutrition of community; Nutritional policies
and their implementation; Metabolic function of nutrients. Nutrients: Sources, functions, digestion,
absorption, assimilation and transport of carbohydrates, proteins and fats in human beings;
UNIT II
Water and energy balance: Water intake and losses; Basal metabolism- BMR; Body surface area and
factors affecting BMR Formulation of diets: Classification of balanced diet; Balanced diets for
various groups; Diets and disorders. Recommended dietary allowances (RDA); For various age group;
According physiological status; Athletic and sports man; Geriatric persons
UNIT III
Malnutrition: Type of Malnutrition; Multi-factorial causes; Epidemiology of under nutrition and over
nutrition; Nutrition and immunity.
UNIT IV
Nutrition education Assessment of nutritional status: Diet surveys; Anthropometry; Clinical
examination; Biochemical assessment; Additional medical information
UNIT V
Blood constituents; Hormone types; Miscellaneous disorders Food fad and faddism. Potentially toxic
substances in human food.
Textbooks:
1. Swaminathan M, Advanced Text Book on Food & Nutrition (Volume I and II) , The
Bangalore Printing and Publishing Co.Ltd, Bangalore. 2006
2. Stewart Truswell, ABC of Nutrition (4th edition) , BMJ Publishing Group 2003, ISBN
0727916645.
3. Martin Eastwood, Principles of Human Nutrition , Blackwell Publishing, Boca Rotan
Reference:
1. Mike Lean and E. Combet ,Barasi’s Human Nutrition – A Health Perspective , Second
Edition CRC Press, London
2. Introduction to Human Nutrition, Micheal J. G., Susan A.L. Aedin C. and Hester H.V, Wiley-
Blackwell Publication, UK 2009 , ISBN 9781405168076
3. Bogert L.J., Goerge M.B, Doris H.C., Nutrition and Physical Fitness, W.B. Saunders
Company, Toronto, Canada

3 0 0 3
(20A54702) NUMERICAL METHODS FOR ENGINEERS
(OPEN ELECTIVE-III)
Course Objectives:
This course aims at providing the student with the knowledge on various numerical methods for
solving equations, interpolating the polynomials, evaluation of integral equations and solution of
differential equations.
Course Outcomes:
 Apply numerical methods to solve algebraic and transcendental equations.
 Understand fitting of several kinds of curves.
 Derive interpolating polynomials using interpolation formulae.
 Solve differential and integral equations numerically.
UNIT I Solution of Algebraic & Transcendental Equations

Introduction-Bisection Method-Iterative method-Regula falsi method-Newton Raphson method.
System of Algebraic equations: Gauss Jordan method-Gauss Siedal method.
UNIT II Curve Fitting

Principle of Least squares- Fitting of curves- Fitting of linear, quadratic and exponential curves.
UNIT III Interpolation

Finite differences-Newton’s forward and backward interpolation formulae – Lagrange’s formulae
Gauss forward and backward formula, Stirling’s formula, Bessel’s formula
UNIT IV Numerical Integration

Numerical Integration: Trapezoidal rule – Simpson’s 1/3 Rule – Simpson’s 3/8 Rule
UNIT V Solution of Initial value problems to Ordinary differential equations
Numerical solution of Ordinary Differential equations: Solution by Taylor’s series-Picard’s Method

of successive Approximations-Modified Euler’s Method-Runge-Kutta Methods.
Textbooks:
1. Higher Engineering Mathematics, B.S.Grewal, Khanna publishers.
2. Probability and Statistics for Engineers and Scientists, Ronald E. Walpole,PNIE.
3. Advanced Engineering Mathematics, by Erwin Kreyszig, Wiley India
Reference Books:
1. Higher Engineering Mathematics, by B.V.Ramana, Mc Graw Hill publishers.
2. Advanced Engineering Mathematics, by Alan Jeffrey, Elsevier.

https://slideplayer.com/slide/8588078/

3 0 0 3
(20A56702) SENSORS AND ACTUATORS FOR ENGINEERING APPLICATIONS
(OPEN ELECTIVE-III)
Course Objectives:
 To provide exposure to various kinds of sensors and actuators and their engineering
applications.
 To impart knowledge on the basic laws and phenomenon behind the working of sensors and
actuators
 To enlighten the operating principles of various sensors and actuators
 To educate the fabrication of sensors
 To identify the required sensor and actuator for interdisciplinary application
Course Outcomes:
• To recognize the need of sensors and actuators
• To understand working principles of various sensors and actuators
• To identify different type of sensors and actuators used in real life applications
• To exploit basics in common methods for converting a physical parameter into an electrical
quantity
• To make use of sensors and actuators for different applications
UNIT I Introduction to Sensors and Actuators

Sensors: Types of sensors: temperature, pressure, strain, active and passive sensors, General
characteristics of sensors (Principles only), Materials used and their fabrication process: Deposition:
Chemical Vapor Deposition, Pattern: photolithography and Etching: Dry and Wet Etching.
Actuators: Functional diagram of actuators, Types of actuators and their basic principle of working:
Hydraulic, Pneumatic, Mechanical, Electrical, Magnetic, Electromagnetic, piezo-electric and piezo-
resistive actuators, Simple applications of Actuators.
UNIT II Temperature and Mechanical Sensors

Temperature Sensors: Types of temperature sensors and their basic principle of working: Thermo-
resistive sensors: Thermistors, Resistance temperature sensors, Silicon resistive sensors, Thermo-
electric sensors: Thermocouples, PN junction temperature sensors
Mechanical Sensors: Types of Mechanical sensors and their basic principle of working: Force
sensors: strain gauges, tactile sensors, Pressure sensors: semiconductor, piezoresistive, capacitive,
VRP.
UNIT III Optical and Acoustic Sensors
Optical Sensors: Basic principle and working of: Photodiodes, Phototransistors and Photo-resistors
based sensors, Photomultipliers, Infrared sensors: thermal, PIR, thermopiles
Acoustic Sensors: Principle and working of Ultrasonic sensors, Piezo-electric resonators,
Microphones.
UNIT IV Magnetic, Electromagnetic Sensors and Actuators
Motors as actuators (linear, rotational, stepping motors), magnetic valves, inductive sensors (LVDT,
RVDT, and Proximity), Hall Effect sensors, Magneto-resistive sensors, Magneto-strictive sensors and
actuators, Voice coil actuators (speakers and speaker-like actuators).
UNIT V Chemical and Radiation Sensors

Chemical Sensors: Principle and working of Electro-chemical, Thermo-chemical, Gas, pH, Humidity
and moisture sensors.
Radiation Sensors: Principle and working of Ionization detectors, Scintillation detectors, Geiger-
Mueller counters, Semiconductor radiation detectors and Microwave sensors (resonant, reflection,
transmission)
Textbooks:
1. Sensors and Actuators – Clarence W. de Silva, CRC Press, 2nd Edition, 2015
2. Sensors and Actuators, D.A.Hall and C.E.Millar, CRC Press, 1999
Reference Books:
1. Sensors and Transducers- D.Patranabhis, Prentice Hall of India (Pvt) Ltd. 2003
2. Measurement, Instrumentation, and Sensors Handbook-John G.Webster, CRC press 1999
3. Sensors – A Comprehensive Sensors- Henry Bolte, John Wiley.
4. Handbook of modern sensors, Springer, Stefan Johann Rupitsch.
5. Principles of Industrial Instrumentation By D. Patranabhis
NPTEL courses links

https://onlinecourses.nptel.ac.in/noc21_ee32/preview

3 0 0 3
(20A51702) CHEMISTRY OF NANOMATERIALS AND APPLICATIONS
(OPEN ELECTIVE-III)
Course Objectives:
 To understand synthetic principles of Nanomaterials by various methods
 To characterize the synthetic nanomaterials by various instrumental methods
 To enumerate the applications of nanomaterials in engineering
Course Outcomes:
 Understand the state of art synthesis of nano materials
 Characterize nano materials using ion beam, scanning probe methodologies, position sensitive
atom probe and spectroscopic ellipsometry.
 Analyze nanoscale structure in metals, polymers and ceramics
 Analyze structure-property relationship in coarser scale structures
 Understand structures of carbon nano tubes
UNIT I
Introduction: Scope of nanoscience and nanotecnology, nanoscience in nature, classification of
nanostructured materials, importance of nano materials.
Synthetic Methods: Bottom-Up approach: Sol-gel synthesis, microemulsions or reverse micelles, co-
precipitation method, solvothermal synthesis, hydrothermal synthesis, microwave heating synthesis
and sonochemical synthesis.
UNIT II
Top-Down approach: Inert gas condensation, arc discharge method, aerosol synthesis, plasma arc
technique, ion sputtering, laser ablation, laser pyrolysis, and chemical vapour deposition method,
electrodeposition method, high energy ball milling.
UNIT III
Techniques for characterization: Diffraction technique, spectroscopy techniques, electron microscopy
techniques for the characterization of nanomaterials, BET method for surface area analysis, dynamic
light scattering for particle size determination.
UNIT IV
Studies of Nano-structured Materials: Synthesis, properties and applications of the following
nanomaterials, fullerenes, carbon nanotubes, core-shell nanoparticles, nanoshells, self- assembled
monolayers, and monolayer protected metal nanoparticles, nanocrystalline materials, magnetic
nanoparticles and important properties in relation to nanomagnetic materials, thermoelectric materials,
non-linear optical materials, liquid crystals.
UNIT V
Engineering Applications of Nanomaterials
Textbooks:
1. NANO: The Essentials: T Pradeep, MaGraw-Hill, 2007.
2. Textbook of Nanoscience and nanotechnology: B S Murty, P Shankar, BaldevRai, BB Rath
and James Murday, Univ. Press, 2012.
References:
1. Concepts of Nanochemistry; Ludovico Cademrtiri and Geoffrey A. Ozin& Geoffrey A. Ozin,
Wiley-VCH, 2011.
2. Nanostructures & Nanomaterials; Synthesis, Properties & Applications: Guozhong Cao,
Imperial College Press, 2007.
3. Nanomaterials Chemistry, C. N. R. Rao, Achim Muller, K.Cheetham, Wiley-VCH, 2007.

3 0 0 3
(20A01705) HEALTH, SAFETY AND ENVIRONMENTAL MANAGEMENT PRACTICES

(Open Elective Course-IV)
Course Objectives:
• To understand safety, health and environmental management.
• To be familiar with hazard classification and assessment, hazard evaluation and hazard .
control, environmental issues and management
• To get exposed to accidents modeling, accident investigation and reporting, concepts of.
HAZOP and PHA
• To be familiar with safety measures in design and process operations.
• To get exposed to risk assessment and management, principles and methods
Course Outcomes :
• To understand safety, health and environmental management.
• To be familiar with hazard classification and assessment, hazard evaluation and hazard.
• To get exposed to accidents modelling, accident investigation and reporting control,
environmental issues and management
• To get concepts of HAZOP and PHA.
• To be familiar with safety measures in design and process operations.
UNIT I
Introduction to safety, health and environmental management - Basic terms and their definitions -
Importance of safety - Safety assurance and assessment - Safety in design and operation - Organizing
for safety.
UNIT II
Hazard classification and assessment - Hazard evaluation and hazard control.
Environmental issues and Management - Atmospheric pollution - Flaring and fugitive release -
Water pollution - Environmental monitoring - Environmental management.
UNIT III
Accidents modelling - Release modelling - Fire and explosion modelling - Toxic release and
dispersion Modelling
UNIT IV
Accident investigation and reporting - concepts of HAZOP and PHA.
Safety measures in design and process operations - Inserting, explosion, fire prevention, sprinkler
systems.
UNIT V
Risk assessment and management - Risk picture - Definition and characteristics - Risk acceptance
criteria - Quantified risk assessment - Hazard assessment - Fatality risk assessment - Risk
management principles and methods.
Textbooks:
1. Process Safety Analysis, by Skelton. B, Gulf Publishing Company, Houston, 210pp.,
1997.
2. Risk Management with Applications from Offshore Petroleum Industry, by TerjeAven
and Jan Erik Vinnem, Springer, 200pp., 2007.
Reference Books:
1. Introduction to Safety and Reliability of Structures, by Jorg Schneider
2. Structural Engineering Documents Vol. 5, International Association for Bridge and
Structural Engineering (IABSE), 138pp., 1997.

3. Safety and Health for Engineers, by Roger L. Brauer, John Wiley and Sons Inc. pp. 645-
663, 2006.
4. Health, Safety and Environmental Management in Offshore and Petroleum Engineering,
Srinivasan Chandrasekaran, John Wiley and Sons, 2016.

3 0 0 3
(20A02705) RENEWABLE ENERGY SYSTEMS
(Open Elective Course – IV)
Course Objectives:
 Understand various sources of Energy and the need of Renewable Energy Systems.
 Understand the concepts of Solar Radiation, Wind energy and its applications.
 Analyze solar thermal and solar PV systems
 Understand the concept of geothermal energy and its applications, biomass energy, the
concept of Ocean energy and fuel cells.
Course Outcomes:
 Understand various alternate sources of energy for different suitable application
requirements
 Understand the concepts of solar energy generation strategies and wind energy system
 Analyze Solar and Wind energy systems
 Understand the basics of Geothermal Energy Systems, various diversified energy scenarios
of ocean, biomass and fuel cells
UNIT I SOLAR ENERGY

Solar radiation - beam and diffuse radiation, solar constant, earth sun angles, attenuation and
measurement of solar radiation, local solar time, derived solar angles, sunrise, sunset and day length.
flat plate collectors, concentrating collectors, storage of solar energy-thermal storage.
UNIT II PV ENERGY SYSTEMS

Introduction, The PV effect in crystalline silicon basic principles, the film PV, Other PV
technologies, Electrical characteristics of silicon PV cells and modules, PV systems for remote
power, Grid connected PV systems.
UNIT III WIND ENERGY

Principle of wind energy conversion; Basic components of wind energy conversion systems;
windmill components, various types and their constructional features; design considerations of
horizontal and vertical axis wind machines: analysis of aerodynamic forces acting on wind mill
blades and estimation of power output; wind data and site selection considerations.
UNIT IV GEOTHERMAL ENERGY

Estimation and nature of geothermal energy, geothermal sources and resources like hydrothermal,
geo-pressured hot dry rock, magma. Advantages, disadvantages and application of geothermal
energy, prospects of geothermal energy in India.
UNIT V MISCELLANEOUS ENERGY TECHNOLOGIES

Ocean Energy: Tidal Energy-Principle of working, performance and limitations. Wave Energy-
Principle of working, performance and limitations.
Bio mass Energy: Biomass conversion technologies, Biogas generation plants, Classification,
advantages and disadvantages, constructional details, site selection, digester design consideration
Fuel cell: Principle of working of various types of fuel cells and their working, performance and
limitations.
Textbooks:
1. Stephen Peake, “Renewable Energy Power for a Sustainable Future”, Oxford International
Edition, 2018.
2. G. D. Rai, “Non-Conventional Energy Sources”, 4th Edition, Khanna Publishers, 2000.
Reference Books:
1. S. P. Sukhatme, “Solar Energy”,3rd Edition, Tata Mc Graw Hill Education Pvt. Ltd, 2008.
2. B H Khan , “ Non-Conventional Energy Resources”, 2nd Edition, Tata Mc Graw Hill
Education Pvt Ltd, 2011.
3. S. Hasan Saeed and D.K.Sharma,“Non-Conventional Energy Resources”,3rd Edition,
S.K.Kataria& Sons, 2012.
4. G. N. Tiwari and M.K.Ghosal, “Renewable Energy Resource: Basic Principles and
Applications”, Narosa Publishing House, 2004.

3 0 0 3
(20A04705) MICROCONTROLLERS & APPLICATIONS
(Open Elective Course –IV)
Course Objectives:
 Describe the Architecture of 8051 Microcontroller and Interfacing of 8051 to external
memory.
 Write 8051 Assembly level programs using 8051 instruction set.
 Describe the Interrupt system, operation of Timers/Counters and Serial port of 8051.
 Interface simple switches, simple LEDs, ADC 0804, LCD and Stepper Motor to 8051.
Course Outcomes:
 Understand the importance of Microcontroller and Acquire the knowledge of Architecture of
8051 Microcontroller.
 Apply and Interface simple switches, simple LEDs, ADC 0804, LCD and Stepper Motor to
using 8051 I/O ports.
 Develop the 8051 Assembly level programs using 8051 Instruction set
 Design the Interrupt system, operation of Timers/Counters and Serial port of 8051
UNIT 1 8051 Microcontroller:

Microprocessor Vs Microcontroller, Embedded Systems, Embedded Microcontrollers, 8051
Architecture- Registers, Pin diagram, I/O ports functions, Internal Memory organization. External
Memory (ROM & RAM) interfacing.
UNIT II
Addressing Modes, Data Transfer instructions, Arithmetic instructions, Logical instructions, Branch
instructions, Bit manipulation instructions. Simple Assembly language program examples to use
these instructions.
UNIT III
8051 Stack, Stack and Subroutine instructions. Simple Assembly language program examples to use
subroutine instructions.8051 Timers and Counters – Operation and Assembly language programming
to generate a pulse using Mode-1 and a square wave using Mode- 2 on a port pin.
UNIT IV
8051 Serial Communication- Basics of Serial Data Communication, RS- 232 standard, 9 pin RS232
signals, Simple Serial Port programming in Assembly and C to transmit a message and to receive data
serially.8051 Interrupts. 8051 Assembly language programming to generate an external interrupt
using a switch.
UNIT V
8051 C programming to generate a square waveform on a port pin using a Timer interrupt. Interfacing
8051 to ADC-0804, DAC, LCD and Interfacing with relays and opto isolators, Stepper Motor
Interfacing, DC motor interfacing, PWM generation using 8051.
Textbooks:
1. Muhammad Ali Mazidi and Janice Gillespie Mazidi and Rollin D. McKinlay; “The 8051
Microcontroller and Embedded Systems – using assembly and C”, PHI, 2006 / Pearson, 2006.
2. Kenneth J. Ayala, “The 8051 Microcontroller”, 3rd Edition, Thomson/Cengage Learning.
References:
1. Manish K Patel, “The 8051 Microcontroller Based Embedded Systems”, McGraw Hill, 2014,
ISBN: 978-93-329-0125-4.
2. Raj Kamal, “Microcontrollers: Architecture, Programming, Interfacing and System Design”,
Pearson Education, 2005.

3 0 0 3
(20A05705a) CYBER SECURITY
(Open Elective-IV)
Course Objectives:
The course is designed to provide awareness on different cyber crimes, cyber offenses, tools and methods
used in cybercrime.
Course Outcomes:
 Classify the cybercrimes and understand theIndian ITA 2000
 Analyse the vulnerabilities in any computing system and find the solutions
 Predict the security threats of the future
 Investigate the protection mechanisms
 Design security solutions for organizations
UNIT I Introduction to Cybercrime

Introduction, Cybercrime, and Information Security, Who are Cybercriminals, Classifications of
Cybercrimes, And Cybercrime: The legal Perspectives and Indian Perspective, Cybercrime and the Indian
ITA 2000, A Global Perspective on Cybercrimes.
UNIT II Cyber Offenses: How Criminals Plan Them
Introduction, How Criminals plan the Attacks, Social Engineering, Cyber stalking, Cyber Cafe and
Cybercrimes, Botnets: The Fuel for Cybercrime, Attack Vector, Cloud Computing
UNIT III Cybercrime: Mobile and Wireless Devices
Introduction, Proliferation of Mobile and Wireless Devices, Trends in Mobility, Credit card Frauds in
Mobile and Wireless Computing Era, Security Challenges Posed by Mobile Devices, Registry Settings for
Mobile Devices, Authentication service Security, Attacks on Mobile/Cell Phones, Mobile Devices:
Security Implications for Organizations, Organizational Measures for Handling Mobile, Organizational
Security Policies an Measures in Mobile Computing Era, Laptops.
UNIT IV Tools and Methods Used in Cybercrime
Introduction, Proxy Servers and Anonymizers, Phishing, Password Cracking, Keyloggers and Spywares,
Virus and Worms, Trojan Horse and Backdoors, Steganography, DoS and DDoS attacks, SQL Injection,
Buffer Overflow.
UNIT V Cyber Security: Organizational Implications
Introduction, Cost of Cybercrimes and IPR issues, Web threats for Organizations, Security and Privacy
Implications, Social media marketing: Security Risks and Perils for Organizations, Social Computing and
the associated challenges for Organizations.
Textbooks:
1. Cyber Security: Understanding Cyber Crimes, Computer Forensics and Legal Perspectives, Nina
Godbole and Sunil Belapure, Wiley INDIA.
Reference Books:
1. Cyber Security Essentials, James Graham, Richard Howard and Ryan Otson, CRC Press.
2. Introduction to Cyber Security, Chwan-Hwa(john) Wu,J.David Irwin. CRC Press T&F Group

http://nptel.ac.in/courses/106105031/40

3 0 0 3
(20A05705b)INTRODUCTION TO FULL STACK DEVELOPMENT
(Open Elective Course – IV)
Course Objectives:
 To build foundation on HTML this will help developer to use HTML concepts for building
responsive web application.
 To Develop HTML based Single application for Browsers.
 To Understand OOPs concepts and its applications by building competency in object –oriented
Programming.
 To implement frontend and backend scenarios using Web Sockets.
 To become proficient in Bootstrap concepts.
Course Outcomes:
 Able to how to program a browser like using JavaScript, jQuery, Angular, or Vue.
 Distinguishing trends in multi-device implementation.
 Create webpages that function using external data.
 Disambiguate the different structures that a no SQL database may represent.
 Derive information from data and implement data into applications.
UNIT I
e The Modern Web: Rise of the Web, Mobile Web, The State of HTML, Applications vs Web
Sites, Keeping Up.
Planning Your Work: Identifying Requirements, Defining the Work, Tracking the Work
Continuous Improvement, Prioritization &Estimation, Managing Bugs, Continuous Delivery
User Experience: Information Architecture, Getting the User Experience Right, Polishing the User
Experience, Implementing the User Experience.
UNIT II
Designing Systems: System Architectures, Identifying Concepts, Identifying User Interactions,
Handling Commonalities, Working with Legacy and External Dependencies, Component
Interactions, Applications vs. Modules, Cross-Functional Requirements, Caching, Designing for
Failure, Designing Modules, Refactoring, Tools, Changing Your Architecture.
Ethics: Privacy, Cognitive Load, Energy Usage, Trust.
Front End: HTML, From Server to Browser, Styling, Components, Responsive Design, Progressive
Enhancement to Progressively Enhance, or Not? Mobile First, Feature Detection, Progressive
Enhancement of Style, When Not Using Progressive Enhancement, Search Engine Optimization,
Build Tools.
UNIT III
Testing: Test-Driven Development, Test Pyramid, Behaviour-Driven Development, Three Amigos,
Manual Testing, Visual Testing, Cross-Functional Testing,
JavaScript: Asynchronicity, JavaScript in the Browser, Offline-First Development, Document
Object Model, Server-Side JavaScript, Table of Contents viii JavaScript Modules, Structuring Your
JavaScript, JavaScript Types, Object-Oriented Programming, Functional Programming,
Communicating Between Components, Connecting Components Together, Testing, Build Tools.
Accessibility: Accessible from the Start, Working with Assistive Technologies, Dealing with
Interactive UI, Testing for Accessibility, Avoiding Common Mistakes.
UNIT IV
APIs: API Responsibilities, designing a REST API, Securing Your API, Event-Based APIs,
Discovering APIs, Using APIs
Storing Data: Types of Databases, To SQL, or NoSQL?,Where to Store Your Data, Accessing
Data from Your App, Managing Your Data, Protecting Your Data.
Security: Trust, Responding to Incidents, The Golden Rule, Threats, Security Checklists, Passwords,
Indirect Attacks.
UNIT V
Deployment: Twelve Factor Apps, Developer Machines, Production Environments, Moving Code
into Production, Configuring Your Box, Infrastructure, Immutable Infrastructure, Continuous
Delivery & Continuous Deployment.
In Production: Fire Drills, Run Books, Monitoring, Responding to Incidents
Constant Learning: Collecting, Experiments, Analysing Results, Hypothesis-Driven.
Textbook:
1. Chris Northwood, The full Stack Developer, Apress, 2018.
Reference Books:
1. Modern Full-Stack Development: Using TypeScript, React, Node.js, Webpack, and Docker,
Frank Zammetti.
2. Full Stack Web Development for Beginners, Riaz Ahmed.
1. Learn Full Stack Web Development with 40+ Projects and Exercises | Udemy

3 0 0 3
(20A05705c) INDUSTRIAL IOT
(Open Elective-IV)
Course Objectives:
 Acquire theoretical knowledge on Industrial Internet of Things.
 Apply suitable machine learning techniques for data handling and to gain knowledge from it.
 Evaluate the performance of algorithms for sensors and data transmission.
Course Outcomes:
 Understand the characteristics of Internet of Things and its industry strategies.
 Apply various Internet of Things models to appropriate problems.
 Identify and integrate more than one technology to enhance the performance.
 Understand the sensors and data transmission used in Internet of Things.
 Analyse the co-occurrence of data to find interesting frequent patterns.
 Pre-process the data before applying to any real-world problem and can evaluate its
performance.
UNIT I Overview of Internet of Things

Introduction, IOT Architecture, Application –based IOT protocols, Cloud Computing, Fog
Computing, Sensor Cloud, Big Data.
Overview of Industry 4.0 and Industrial Internet of Things: IIoT- Prerequisites of IIOT, Basics of
CPS, CPS and IIOT, Applications of IIoT.
UNIT II Industrial Internet of Things

Introduction, Industrial Internet Systems, Industrial sensing, Industrial sensing, Industrial Processes.
Business Models and Reference Architecture of IIoT: Definition of a business model, Business
models of IOT, Business models of IIOT.
UNIT III Key and On-site Technologies

Key Technologies: Off-site Technologies- Introduction, Cloud Computing- Necessity, Cloud
Computing and IIot, Industrial Cloud Platform Providers, SLA, Requirements of Industry 4.0, Fog
Computing.
On-site Technologies- Introduction, Augmented Reality- History, Categorization, Applications,
Virtual Reality- History, Categorization, Applications.
UNIT IV Sensors and Data Transmission

Sensors: Introduction to Sensors, Characteristics-Sensor calibration, Sensor profile, Operating
voltage, Sensor Categories. Actuators:Introduction, Thermal Actuators, Hydraulic Actuators,
Pneumatic Actuators, Electromechanical Actuators.
Industrial Data Transmission:Foundation fieldbus, Profibus, HART, Interbus, Bitbus.
UNIT V Machine learning and Data science, applications in healthcare

Machine Learning and Data Science in Industries:Introduction, Machine Learning, Categorization on
ML, Applications and Data Science of ML in industries, Deep Learning, Applications of Deep
Learning in industries.
Applications of Healthcare in Industries: Smart Devices, Advanced Technologies using in
Healthcare, Open Research Issues to be Addressed.
Textbooks:
1. S. Misra, C. Roy, and A. Mukherjee, 2020. Introduction to Industrial Internet of Things and
Industry 4.0. CRC Press.
Reference Books:
1. Industrial IoT. Available online: https://medium.com/iotforall/whatproduct-managers-need-
to-know-about-industrial-iot-8c92eec1d9d2
2. IIoT Cloud Platforms. Available online: https://fr.farnell.com/willthere-be-a-dominant-iiot-
cloud-platform.
3. Kajima, T. and Kawamura, Y., 1995. Development of a high-speed solenoid valve:
Investigation of solenoids. IEEE Transactions on industrial electronics, 42(1), pp.1-8.
1. https://www.coursera.org/learn/industrial-internet-of-things
2. https://www.coursera.org/specializations/developing-industrial-iot

3 0 0 3
(20A27705) WASTE AND EFFLUENT MANAGEMENT
(OPEN ELECTIVE-IV)
Course Objectives:
 To understand the wastewater treatment process.
 To gain knowledge on waste disposal in various ways.
 To know about advances in wastewater treatment.
Course Outcomes:
 Acquires knowledge on technologies used for chemical and biological methods of waste
water and effluent treatment
UNIT I
Wastewater Treatment an Overview: Terminology – Regulations – Health and Environment Concerns
in waste water management – Constituents in waste water inorganic – Organic and metallic
constituents. Process Analysis and Selection: Components of waste water flows – Analysis of Data –
Reactors used in waste water treatment – Mass Balance Analysis – Modeling of ideal and non ideal
flow in Reactors – Process Selection
UNIT II
Waste disposal methods – Physical, Chemical & Biological; Economical aspects of waste treatment
and disposal. Treatment methods of solid wastes: Biological composting, drying and incineration;
Design of Solid Waste Management System: Landfill Digester, Vermicomposting Pit.
UNIT III
Introduction: Classification and characterization of food industrial wastes from Fruit and Vegetable
processing industry, Beverage industry; Fish, Meat & Poultry industry, Sugar industry and Dairy
industry.
Chemical Unit Processes: Role of unit processes in waste water treatment chemical coagulation –
Chemical precipitation for improved plant performance chemical oxidation – Neutralization –
Chemical Storage
UNIT IV
Biological Treatment: Overview of biological Treatment – Microbial metabolism – Bacterial growth
and energetics – Aerobic biological oxidation – Anaerobic fermentation and oxidation – Trickling
filters – Rotating biological contractors – Combined aerobic processes – Activated sludge film
packing.
UNIT V
Advanced Wastewater Treatment: Technologies used in advanced treatment – Classification of
technologies. Removal of Colloids and suspended particles – Depth Filtration – Surface Filtration –
Membrane Filtration- Absorption – Ion Exchange – Advanced oxidation process.
Textbooks:
1. Herzka A & Booth RG; “Food Industry Wastes: Disposal and Recovery”; Applied Science
Pub Ltd. 1981,
2. Fair GM, Geyer JC & Okun DA; “Water & Wastewater Engineering”; John Wiley & Sons,
Inc. 1986,
References:
1. GE; “Symposium: Processing Agricultural & Municipal Wastes”; AVI. 1973,
2. Inglett Green JH & Kramer A; “Food Processing Waste Management”; AVI. 1979,
3. Rittmann BE & McCarty PL; “Environmental Biotechnology: Principles and Applications”;
Mc-Grow-Hill International editions2001,.
4. Bhattacharyya B C & Banerjee R; “Environmental Biotechnology”; Oxford University Pre
5. Bartlett RE; “ Wastewater Treatment; Applied Science” Pub Ltd.
6. G. Tchobanoglous, FI Biston, “Waste water Engineering Treatment and Reuse”: Mc Graw
Hill, 2002.
7. “Industrial Waste Water Management Treatment and Disposal by Waste Water” 3 rd Edition
Mc Graw Hill 2008

3 0 0 3
(20A54703) NUMBER THEORY AND ITS APPLICATIONS
(OPEN ELECTIVE-IV)
Course Objectives:
This course enables the students to learn the concepts of number theory and its applications to
information security.
Course Outcomes:
 Understand number theory and its properties.
 Understand principles on congruences
 Develop the knowledge to apply various applications
 Develop various encryption methods and its applications.
UNIT I Integers, Greatest common divisors and prime Factorization
The well-ordering property-Divisibility-Representation of integers-Computer operations with
integers-Prime numbers-Greatest common divisors-The Euclidean algorithm -The fundamental
theorem of arithmetic-Factorization of integers and the Fermat numbers-Linear Diophantine
equations
UNIT II Congruences
Introduction to congruences -Linear congruences-The Chinese remainder theorem-Systems of linear
congruences
UNIT III Applications of Congruences

Divisibility tests-The perpetual calendar-Round-robin tournaments-Computer file storage and
hashing functions. Wilson's theorem and Fermat's little theorem- Pseudo primes- Euler's theorem-
Euler's p hi-function- The sum and number of divisors- Perfect numbers and Mersenne primes.
UNIT IV Finite fields & Primality, factoring

Finite fields- quadratic residues and reciprocity-Pseudo primes-rho method-fermat factorization and
factor bases.
UNIT V Cryptology
Basic terminology-complexity theorem-Character ciphers-Block ciphers-Exponentiation ciphers-
Public-key cryptography-Discrete logarithm-Knapsack ciphers- RSA algorithm-Some applications to
computer science.
Textbooks:
1. Elementary number theory and its applications, Kenneth H Rosen, AT & T Information
systems & Bell laboratories.
2. A course in Number theory & Cryptography, Neal Koblitz, Springer.
Reference Books:
1. An Introduction To The Theory Of Numbers, Herbert S. Zuckerman, Hugh L.
Montgomery, Ivan Niven, wiley publishers
2. Introduction to Analytic number theory-Tom M Apostol, springer
3. Elementary number theory, VK Krishnan, Universities press

https://www.slideshare.net/ItishreeDash3/a-study-on-number-theory-and-its-applications

3 0 0 3
(20A56703) SMART MATERIALS AND DEVICES
(OPEN ELECTIVE-IV)
Course Objectives:
• To provide exposure to smart materials and their engineering applications.
• To impart knowledge on the basics and phenomenon behind the working of smart materials
• To enlighten the properties exhibited by smart materials
• To educate various techniques used to synthesize and characterize smart materials
• To identify the required smart material for distinct applications/devices
Course Outcomes:
• to recognize the need of smart materials
• to understand the working principles of smart materials
• to know different techniques used to synthesize and characterize smart materials
• to exploit the properties of smart materials
• to make use of smart materials for different applications
UNIT I
Introduction: Historical account of the discovery and development of smart materials, Two phases:
Austenite and Martensite, Temperature induced phase changes, Shape memory effect,
Pseudoelasticity, One-way shape memory effect, Two-way shape memory effect.
UNIT II: Properties of Smart Materials: Physical principles of optical, Electrical, Dielectric,
Piezoelectric, Ferroelectric, Pyroelectric and Magnetic properties of smart materials
UNIT III: Synthesis of smart materials: Solid state reaction technique, Chemical route: Chemical
vapour deposition, Sol-gel technique, Hydrothermal method, Co-precipitaiton. Green synthesis,
Mechanical alloying and Thin film deposition techniques: Chemical etching, Sol-gel, spray pyrolysis.
UNIT IV: Characterization techniques: X-ray diffraction, Raman spectroscopy (RS), Fourier-
transform infrared reflection (FTIR), UV-Visible spectroscopy, Scanning electron microscopy (SEM),
Transmission electron microscopy, Atomic force microscopy (AFM) and Differential Scanning
Calorimetry (DSC).
UNIT V: Materials and Devices: Characteristics of shape memory alloys, Magnetostrictive,
Optoelectronic, Piezoelectric, Metamaterials, Electro-rheological and Magneto-rheological materials
and Composite materials.
Devices based on smart materials: Sensors & Actuators, MEMS and intelligent devices, Future scope
of the smart materials.
Textbooks:
1. Encyclopaedia of Smart Materials- Mel Schwartz, John Wiley & Sons, Inc.2002
2. Smart Materials and Structures - M. V. Gandhi and B.S. Thompson, Champman and Hall,
1992
References:
1. Smart Materials and Technologies- M. Addington and D. L. Schodek, , Elsevier, 2005.
2. Characterization and Application of smart Materials -R. Rai, Synthesis, , Nova Science, 2011.
3. Electroceramics: Materials, Properties, Applications -A.J. Moulson and J.M. Herbert, 2ndEdn.,
John Wiley & Sons, 2003.
4. Piezoelectric Sensorics: Force, Strain, Pressure, Acceleration and Acoustic 1. Emission
Sensors, Materials and Amplifiers, G. Gautschi, Springer, 2002.
5. Optical Metamaterials: Fundamentals and Applications -W. Cai and V. Shalaev,
springer,2010.
6. Smart Materials and Structures - P. L Reece, New Research, Nova Science, 2007
NPTEL courses links
https://nptel.ac.in/content/storage2/courses/112104173/Mod_1_smart_mat_lec

3 0 0 3
(20A51703) GREEN CHEMISTRY AND CATALYSIS FOR SUSTAINABLE
ENVIRONMENT (OPEN ELECTIVE-IV)
Course Objectives:
 Learn an interdisciplinary approach to the scientific and societal issues arising from industrial
chemical production, including the facets of chemistry and environmental health sciences that
can be integrated to promote green chemistry and the redesign of chemicals, industrial
processes and products.
 Understand the use of alternatives assessments that combine chemical, environmental health,
regulatory, and business considerations to develop safer products.
Course Outcomes:
 Recognize and acquire green chemistry concepts and apply these ideas to develop respect for
the inter connectedness of our world and an ethic of environmental care and sustainability.
UNIT I: PRINCIPLES AND CONCEPTS OF GREEN CHEMISTRY
Introduction, Green chemistry Principles, sustainable development and green chemistry, atom
economy, atom economic: Rearrangement and addition reactions and un-economic reactions:
Substitution, elimination and Wittig reactions, Reducing Toxicity. Waste - problems and Prevention:
Design for degradation, Polymer recycling.
UNIT II: CATALYSIS AND GREEN CHEMISTRY
Introduction to catalysis, Heterogeneous catalysts: Basics of Heterogeneous Catalysis, Zeolites and
the Bulk Chemical Industry, Heterogeneous Catalysis in the Fine Chemical and Pharmaceutical
Industries, Catalytic Converters, Homogeneous catalysis: Transition Metal Catalysts with Phosphine
Ligands, Greener Lewis Acids, Asymmetric Catalysis, Heterogenising the Homogenous catalysts,
Phase transfer catalysis: Hazard Reduction, C–C Bond Formation, Oxidation Using Hydrogen
Peroxide, Bio-catalysis and photo-catalysis with examples.
UNIT III: ORGANIC SOLVENTS: ENVIRONMENTALLY BENIGN SOLUTIONS
Organic solvents and volatile organic compounds, solvent free systems, supercritical fluids: Super
critical carbondioxide, super critical water and water as a reaction solvent: water-based coatings, Ionic
liquids as catalyst and solvent
UNIT IV: EMERGING GREENER TECHNOLOGIES AND ALTERNATIVE ENERGY
SOURCES
Biomass as renewable resource, Energy: Fossil Fuels, Energy from Biomass, Solar Power, Other
Forms of Renewable Energy, Fuel Cells, Chemicals from Renewable feedstocks: Chemicals from
Renewable Feedstocks: Chemicals from Fatty Acids, Polymers from Renewable Resources, Some
Other Chemicals from Natural Resources, Alternative Economies: The Syngas Economy, The
Biorefinery, Design for energy efficiency: Photochemical Reactions: Advantages of and Challenges
Faced by Photochemical Processes, Examples of Photochemical Reactions, Chemistry Using
Microwaves: Microwave Heating, Microwave-assisted Reactions, Sonochemistry: Sonochemistry and
Green Chemistry, Electrochemical Synthesis: Examples of Electrochemical Synthesis. Industrial
applications of alternative environmentally benign catalytic systems for carrying out the important
reactions such as selective oxidation, reduction and C-C bond formations (specific reactions).
UNIT V: GREEN PROCESSES FOR GREEN NANOSCIENCE
Introduction and traditional methods in the nanomaterials synthesis, Translating green chemistry
principles for practicing Green Nanoscience. Green Synthesis of Nanophase Inorganic Materials and
Metal Oxide Nanoparticles: Hydrothermal Synthesis, Reflux Synthesis, Microwave-Assisted
Synthesis, Other methods for Green synthesis of metal and metal oxide nanoparticles, Green
chemistry applications of Inorganic nanomaterials
Textbooks:
1. M. Lancaster, Green Chemistry an introductory text, Royal Society of Chemistry, 2002.
2. Paul T. Anastas and John C. Warner, Green Chemistry Theory and Practice, 4 th Edition,
Oxford
University Press, USA

References:
1. Green Chemistry for Environmental Sustainability, First Edition, Sanjay K. Sharma and
AckmezMudhoo, CRC Press, 2010.
2. Edited by AlvisePerosa and Maurizio Selva , Hand Book of Green chemistry Volume 8:Green
Nanoscience, wiley-VCH, 2013.
HONORS

B.Tech (ME) L T P C
3 1 0 4
(20A03H01) MECHANICS AND MANUFACTURING OF COMPOSITE MATERIALS
Course Objectives:
 Understand the properties of composite materials.
 Familiarize the manufacturing methods for composites.
 Teach the practical requirements associated with joining and manufacturing
Course Outcomes:
 Design and manufacture composite materials for various applications.
 Conduct mechanical testing of composite structures and analyse failure modes.
 Synthesize structures for environmental effects.
 Analyse economic aspects of using composites.
UNIT I Introduction To Composite Materials

Introduction To Composite Materials: Definition, classification and characteristics of composite
Materials – fibrous composites, laminated composites, particulate composites. Applications:
Automobile, Aircrafts. missiles. Space hardware, Electrical and electronics, Marine, recreational and
sports equipment, future potential of composites.
Fiber Reinforced Plastic Processing: Lay-up and curing, fabricating process, open and closed
mould process, hand lay-up techniques; structural laminate bag molding, production procedures for
bag molding; filament winding, pultrusion, pulforming, thermo-forming, injection molding, blow
molding.
UNIT II Micro & Macro Mechanics of Materials

Micro Mechanical Analysis of a Lamina:
Micro Mechanical Analysis of a Lamina: Introduction, Evaluation of the four elastic moduli by Rule
of mixture, Numerical problems.
Macro Mechanics of a Lamina: Hooke's law for different types of materials, Number of elastic
constants, Two - dimensional relationship of compliance and stiffness matrix. Hooke's law for two-
dimensional angle lamina, engineering constants - Numerical problems. Stress-Strain relations for
lamina of arbitrary orientation, Numerical problems.
UNIT III Biaxial Strength

Biaxial Strength Theories
Maximum stress theory, Maximum strain theory, Tsai-Hill theory, Tsai, Wu tensor theory,
Numerical problems.
Macro Mechanical Analysis of Laminate
Introduction, code, Kirchoff hypothesis, CL T, A, B, and D matrices (Detailed derivation) , Special
cases of laminates, Numerical problems.
UNIT IV Metal Matrix Composite

Metal Matrix Composites: Metal Matrix Composites: Reinforcement materials, types,
characteristics and selection base metals selection. Need for production MMC’s and its application.
Fabrication Process For MMC's: Powder metallurgy technique, liquid metallurgy technique and
secondary processing, special fabrication techniques.
Study Properties Of MMC's: Physical Mechanical, Wear, machinability and Other Properties.
Effect of size, shape and distribution of particulate on properties.
UNIT V Failure Theories

Micromechanics of Failure of Unidirectional Lamina, Anisotropic Strength and Failure Theories,
Importance of Shear Strength, Choice of Failure Criteria, Examples.
Textbooks:
1. K.K. Chawla, Composite Materials, Springer-Verlag, New York, 1998.
2. B.T. Astrom, Manufacturing of Polymer Composites, Chapman & Hall, 1997.
3. Stuart M Lee, J. Ian Gray, Miltz, Reference Book for Composites Technology, CRC press,
1989.
Reference Books:
1. Frank L Matthews and R D Rawlings, Composite Materials: Engineering and Science, Taylor
and Francis, 2006.
2. D. Hull and T.W. Clyne, Introduction to Composite Materials, Cambridge University Press,
1996.
3. M.R. Piggott, Load Bearing Fibre Composites, Pergamon press, Oxford, 1998.
4. F. Ashby and D.R.H. Jones, Engineering Materials, Pergamon press, 1999.
5. R.W. Davidge and A. Kelly, Mechanical behavior of ceramics, Cambridge university press,
1999.
6. Andrew C. Marshall, Composite Basics, Marshall Consulting. Mode of Evaluation
Quiz/Assignment/ Seminar/Written Examination, 1998.


B.Tech (ME) L T P C
3 1 0 4
(20A03H02) APPLICATIONS OF COMPUTATIONAL FLUID DYNAMICS
Course Objectives:
● Teach the basics of the major theories, approaches and methodologies used in CFD.
● Familiar with the differential equations for flow phenomena and numerical methods for
their solutions.
● Introduce explicit and implicit schemes in hyperbolic equations.
● Expose the students to solve the problems through finite volume method.
● Understand the concepts of linear fluid flow problems, steady state problems and transient
problems.
Course Outcomes:
● Summarize the major theories, approaches and methodologies used in CFD.
● formulate finite volume method for two and three dimensional fluid flow problems.
● apply numerical models to fluid flow and heat transfer calculations
UNIT I Introduction and Solution methods

Introduction: Finite difference method, finite volume method, finite element method, governing
equations and boundary conditions, Derivation of finite difference equations.
Solution methods: Solution methods of elliptical equations — finite difference formulations,
interactive solution methods, direct method with Gaussian elimination. Parabolic equations-explicit
schemes and Von Neumann stability analysis, implicit schemes, alternating direction implicit
schemes, approximate factorization, fractional step methods, direct method with tridiagonal matrix
algorithm.
UNIT II Hyperbolic equations:

explicit schemes and Von Neumann stability analysis, implicit schemes, multi step methods,
nonlinear problems, second order one-dimensional wave equations. Burgers equations: Explicit and
implicit schemes, Runge-Kutta method.
UNIT III Formulations Of Incompressible Viscous Flows

Formulations Of Incompressible Viscous Flows: Formulations of incompressible viscous flows by
finite difference methods, pressure correction methods, vortex methods.
Treatment of compressible flows: potential equation, Euler equations, Navier-stokes system of
equations, flow field-dependent variation methods, boundary conditions, example problems.
UNIT IV Finite Volume Method:
Finite volume method via finite difference method, formulations for two and three-dimensional
problems.
UNIT V Standard Variational Methods:

Linear fluid flow problems, steady state problems, Transient problems.
Textbooks:
1. T. J. C’hung, Computational fluid dynamics, Cambridge University press,2002.
2. John D. Anderson, Computational Fluid Dynamics: Basics with applications, Mc Graw Hill.
2017
Reference Books:
1. Frank Choriton, Text book of fluid dynamics, CBS Publishers & distributors, 1985.
2. Suhas V. Patankar, Numerical heat transfer and fluid flow, Hema shava Publishers
corporation & Mc Graw Hill, 1990.
3. Muralidaran, Computational Fluid Flow and Heat Transfer, Narosa Publications, 2003.
4. Tapan K. Sengupta, Fundamentals of Computational Fluid Dynamics, Universities Press,
2004.
5. C. Pozrikidis, Introduction to Theoretical and Computational Fluid Dynamics, Oxford
University press, 2/e, 2012.

 https://www.youtube.com/watch?v=3QFT7pGx03I
 https://www.youtube.com/watch?v=t7jS7V_6TGQ

B.Tech (ME) L T P C
3 1 0 4
(20A03H03) ADVANCED AUTOMOTIVE ELECTRONICS
Course Objectives:
 Explain the use of electronics in the automobile.
 Explain the importance of various types of sensors and actuators in automotive electronics.
 Demonstrate the various control elements in Engine Management system.
 Familiarize with Vehicle management systems
 Identify various electronic and the instrumentation systems used in automobile.
Course Outcomes:
After completion of this course the student can be able to:
 Obtain an overview of automotive components, like sensors, actuators, communication
protocols and safety systems employed in today’s automotive industry.
 Interface automotive sensors and actuators with microcontrollers.
 Know, the various display devices that are used in automobiles.
 Identify the elements in the engine management and vehicle management system.
UNIT I Introduction to microcomputer
Microcomputer: Buses, memory, timing, CPU registers; Microprocessor architecture: Initialization,
operation codes, program counter, branch and jump instructions, subroutine. Analog to digital
converters and Digital to analog converters, sampling, polling and interrupts, digital filters, lookup
table.
UNIT II Sensors and actuators
Speedsensors,Pressuresensors:ManifoldAbsolutePressuresensor,knocksensor,Temperaturesensors:C
oolantandExhaustgastemperature,ExhaustOxygenlevelsensor,Positionsensors:Throttlepositionsenso
r,acceleratorpedalpositionsensorandcrankshaftpositionsensor,Airmassflowsensor.Solenoids,stepper
motorsandrelays.
UNIT III Electronicenginemanagementsystem
Electronicenginecontrol:Input,outputandcontrolstrategies,electronicfuelcontrolsystem,fuelcontrolmo
des:openloopandclosedloopcontrolatvariousmodes,EGRcontrol,Electronicignitionsystems–
Sparkadvancecorrectionschemes,fuelinjectiontimingcontrol.
UNIT IV Electronicvehiclemanagementsystem
Cruisecontrolsystem,Anti-
lockbrakingsystem,electronicsuspensionsystem,electronicsteeringcontrol,tractioncontrolsystem,Tran
smissioncontrol,Safety:Airbags,collisionavoidingsystem,lowtirepressurewarningsystem.
UNIT V Automotiveinstrumentationsystem
Inputandoutputsignalconversion,multiplexing,fuelquantitymeasurement,coolanttemperatureandoilpr
essuremeasurement,displaydevices-LED,LCD,VFDandCRT,Onboarddiagnostics(OBD),OBD-
II,offboarddiagnostics.
Textbooks:
1. UnderstandingAutomotiveElectronics,WilliamBRibbens,NewneButterworth-Heinermann,6/e,2003.
2. Crouse W H, Automobile Electrical Equipment, McGraw Hill Book Co.Inc, Newyork,
2005.
Reference Books:
1. Bechhold“UnderstandingAutomotiveElectronics”,SAE,1998.
2. RobertBosch“AutomotiveHandBook”,SAE, 5/e,2000.
3. TomDenton, “AutomobileElectricalandElectronicSystems”3/e, EdwardArnold, London,
2004.
4. EricChowanietz-‘AutomotiveElectronics’-SAEInternationalUSA, 1995.

 https://www.youtube.com/watch?v=BOP8qLQzhDc
 https://intranet.cb.amrita.edu/sites/default/files/164-AutomotiveElectronics.pdf
 http://digimat.in/nptel/courses/video/108108147/L01.html
 https://jssstuniv.in/wp-content/uploads/2020/09/M.Tech-Automotive-Electronics-_Final.pdf

B.Tech (ME) L T P C
3 1 0 4
(20A03H04) APPLICATIONS OF OPTIMIZATION TECHNIQUES
Course Objectives:
 Explain principles of optimization and its need.
 Familiarization with theory of optimization methods and algorithms developed for solving
various types of optimization problems.
 Understand the mathematical foundations for Genetic Algorithm, Operators.
 Know fundamental theory and concepts of neural networks, neuro – modelling, several
neural network paradigms and its applications.
 Identify the application of optimization to design of machine elements.
Course Outcomes:
 Know the principles of optimization and its need
 Identify optimization methods and algorithms developed for solving various types of
optimization problems
 Understand and appreciate the basic concepts of Genetic Algorithms and results of applying
various genetic operators
 Solve the concepts of Neural Networks for training and validation of neural network models
UNIT I Introduction
Classical Optimization Techniques: Single variable optimization with and without Constraints,
Multi – Variable Optimization without constraints, Multi – Variable Optimization with Constraints –
Method of Lagrange Multipliers, Kuhn-Tucker Conditions.
Numerical Methods for Optimization: Interval Halving Method, Fibonacci Method, Quadratic
Interpolation Method, Newton Method, Quasi Newton Method, Secant Method.
UNIT II Genetic Algorithm (GA):

Differences and Similarities between Conventional and Evolutionary Algorithms, Working Principle,
Reproduction, Crossover, Mutation, Termination Criteria, Different Reproduction and Crossover
Operators, GA for Constrained Optimization, Draw Backs of GA.
UNIT III Genetic Programming (GP):
Principles of Genetic Programming, Terminal Sets, Functional Sets, Differences between GA & GP,
Random Population Generation, Solving Differential Equations using GP.
UNIT IV Neural networks

Introduction to Neural networks: Knowledge base information processing, General View of
Knowledge Based Algorithm, Neural Information Processing, Hybrid Intelligence and Artificial
Neurons.
Characteristics of Artificial Neural Networks: Single Neural Networks, Multi – Layer Neural
Networks, Training of ANN – Objective, Supervise Training, Unsupervised Training, Overview of
training.
UNIT V Applications of Optimization in Design and

Manufacturing Systems:
Some typical applications like Optimization of Path Synthesis of a Four – bar Mechanism,
Minimization of Weight of a Cantilever Beam, Optimization of Springs and Gears, General
Optimization model of a Machining Process, Optimization of Arc Welding Parameters and General
Procedure in Optimizing Machining Operations Sequence.
Textbooks:
1. Singiresu S. Rao, Engineering Optimization, 3/e, New Age Publishers, 2010.
2. Bart Kosko, Neural Networks and Fuzzy System, 2/e, Prentice Hall of India, 2001.
3. Goldberg D.E., Genetic algorithms in Search, Optimization, and Machine learning, 4/e,
Pearson, 2009.
4. Kalyanmoy Deb, Optimization for Engineering Design: Algorithms and Examples, 2/e, PHI
Learning Pvt. Ltd., 2012.
Reference Books:
1. Kalyanmoy Deb, Multi Objective Optimization using Evolutionary Algorithms, 1/e, John
Wiley and Sons, 2001.
2. Jasbir S. Arora, Introduction to Optimum Design, 4/e, Academic Press, 2016.
3. Ravindran A., Engineering Optimization Methods and Applications, 2/e, John Wiley and
Sons, 2006.
4. Fox R.L., Optimization Methods for Engineering Design, 1/e, Addison Wesley Publication
Co., 1971.

JNTU R20 B.Tech - Mechnaical Engineering III IV Year Course Structure Syllabus

Uploaded by

Copyright:

Available Formats

JNTU R20 B.Tech - Mechnaical Engineering III IV Year Course Structure Syllabus

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

JNTU R20 B.Tech - Mechnaical Engineering III IV Year Course Structure Syllabus

Uploaded by

Copyright:

Available Formats

JNTUA B.Tech.

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR

B.TECH. - MECHANICAL ENGINEERING

Open Elective Course – I

Open Elective Course – II

S.No Course Code Course Name Offered by the Dept.

Honors/Minor courses (The hours distribution can be 3-0-2 or 3-1-0 also) 4 0 0 4

1. 20A03801 Full Internship & Project work PR 12

COURSES OFFERED FOR HONOURS DEGREE IN MECHANICAL ENGINEERING

LIST OF MINORS OFFERED TO MECHANICAL ENGINEERING

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR

UNIT IIntroduction to CAD/CAM

Online Learning Resources:

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR

Online Learning Resources:

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR

UNIT IINTRODUCTION TO TOOL DESIGN

3. Venkataraman K., “Design of Jigs, Fixtures and Presstools”, TMH, 2005.

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR

UNIT IIntroduction to the Sources of Energy

Online Learning Resources:

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR

Online Learning Resources/Virtual Labs:

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR

2. Martin Bates, Interfacing PIC Microcontrollers, Embedded Design by Interative Simulation,

Online Learning Resources/Virtual Labs:

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR

Course Outcomes:Upon successful completion of this course you should be able to

UNIT IIntroduction to finite element methods

Online Learning Resources:

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR

Online Learning Resources:

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR

UNIT - I Introduction to non-destructive testing 8 Hrs

UNIT - II Ultrasonic test 8 Hrs

UNIT - III Liquid penetrant, Eddy Current & Magnetic 10 Hrs

UNIT - IV Infrared & Thermal Testing 8 Hrs

UNIT - V Industrial Applications of NDE: 8 Hrs

Online Learning Resources:

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR

Course Outcomes (CO):

UNIT - II Historical Review: Lecture Hrs: 9

UNIT - V Quality Systems: Lecture Hrs:8

Online Learning Resources:

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR

Online Learning Resources/Virtual Labs:

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR

(20A99601) INTELLECTUAL PROPERTY RIGHTS AND PATENTS

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR

Online Learning Resources: