LOCATION PLAN

20 19 18 17 16 15 14

4 32 1
UP
2 34 21 22 23 24 25 26 27 28

dfsdfdf

Ground Floor Plan

IDF
D

DRAWING, FIXED FINISHES AND FF & E

REFERENCES ZONE - 09
NOTES:
THE COPYRIGHT OF THIS DRAWING REMAINS WITH LWDG AND MAY NOT
BE REPRODUCED WITHOUT PRIOR WRITTEN CONSENT.

ALL PROPOSED WORKS TO BE CARRIED OUT IN ACCORDANCE WITH

LWDG'S 'FIXED FINISHES , FF & E AND TECHNICAL SPECIFICATIONS AND
SCHEDULES FOR INTERIOR WORKS.

ALL CONSULTANTS , SPECIALISTS , SUPPLIERS , MANUFACTURERS , ETC.

MUST REFER TO GENERAL LAYOUT PLANS FOR ACTUAL LOCATIONS OF
GUEST ROOMS , SUITES , APARTMENTS , ETC. AND ESPECIALLY THE
'HANDING' OF THE DIFFERENT TYPES.

ALL CONSULTANTS AS LISTED BELOW SHOULD CO-ORDINATE THEIR

DESIGNS IN ACCORDANCE WITH LWD DESIGN DRAWINGS.
- STRUCTURAL DESIGN.
- MEP SERVICES.
- LIGHTING.
- KITCHEN.
- AUDIO VISUAL.
- I.T.
- ACOUSTIC.
- LIFE AND SAFETY

READ THIS DRAWING IN CONJUNCTION WITH ALL CONSULTANT'S AND

SPECIALIST'S DRAWINGS , DETAILS , SCHEDULES AND SPECIFICATIONS.

IT IS THE RESPONSIBILITY OF THE LOCAL CONSULTANT / LEAD ARCHITECT

POLISHED POLISHED TO ENSURE THAT THE DESIGN COMPLIES WITH LOCAL REGULATIONS OR
PLASTER PLASTER INTERNATIONAL STANDARDS AS REQUIRED.

09.001 CH= +2900MM AFFL. CH= +2900MM AFFL. 09.001 FIT OUT CONTRACTOR MUST PREPARE FULL SHOP DRAWINGS AND
MATERIALS SUBMITTALS WITH SPECIFIC REFERENCE TO SITE CONDITIONS
FOR LWDG APPROVAL PRIOR TO MANUFACTURE INSTALLATION AND
SHOULD BE CO-ORDINATED WITH ALL CONSULTANTS INVOLVED.
Re Rf Rg Rh Rj Rk Rm Rn Rp FIGURED DIMENSIONS ARE TO BE USED IN PREFERENCE TO SCALES.
ALL DIMENSIONS MUST BE CHECKED AGAINST SITE SIZES BEFORE
COMMENCING WORK.
POLISHED POLISHED POLISHED
FIT OUT CONTRACTOR MUST APPLY FIRE RETARDANT LACQUER TO ALL
PLASTER PLASTER PLASTER MILLWORKS AND VENEERED PANELS WITH A PRODUCT WHICH IS
COMPLIANT TO ALL CIVIL DEFENSE REQUIREMENTS FOR SURFACE SPREAD
09.001 CH= +2700MM AFFL. CH= +2700MM AFFL. 09.001 CH= +2700MM AFFL. 09.001 OF FLAME. CONTRACTOR MUST SUBMIT APPROVED CERTIFICATES ON
COMPLETION OF THE WORKS ON SITE.

LEGEND :

Reference to F.F & E Reference to

01.001 Specification. Elevation Drawing.
Index Reference A Elevation Reference
POSTER Zone Reference Sheet No.
01.201
Reference to Finishes
FIRE EXIT ARCHERY
DISPLAY
01.001 Specification.
Index Reference
Zone Reference
Reference to
WASHROOM PANTRY Detail Drawing.
STORE Zone Reference
1 Detail No.
BICYCLE Reference to 01.310 SHEET No.
HORSE
RIDING RECEPTION Door Schedule. Zone Reference
DISPLAY D1 Door Type DETAIL
REFRESHMENT
01.01 Door no.
TOYS
NEW LOCATION Zone Reference
400

LIBRARY 450 2150 6000 FOR SLOT GRILLE

400

KID'S PLAY DISPLAY 800 WALL LEGEND :

LOUNGE
TABLE
Existing Wall Stud Wall
09.005 CH= +2800MM AFFL. TODDLERS

POLISHED EXPERIENCE Block Wall Structural Wall

400 800 CENTRE
PLASTER MINI
IN TERRACOTA CINEMA ACCESSORIES Ex Wall / Demolish
400 400 150 400
EQ 50 EQ 50 EQ 50 EQ 50 EQ 50 EQ 50 EQ 50 EQ 50 EQ 50 EQ 50 EQ EQ 50 EQ 50 EQ 50 EQ 50 EQ 50 EQ 50 EQ 50 EQ 50 EQ 50 EQ 50 EQ 50 EQ

RECEPTION 5995 FLYERS / MAGAZINE 6520

150 400

400

MEDIA

ADDTIONAL GRILLE
NEW LOCATION
REQUIRED
FOR SLOT GRILLE

BASED ON ARCHITECTURE ISSUE 21.10.2022

BASED ON MEP ISSUE DD.MM.YYYY
BASED ON LIGHTING CONSULTANT ISSUE DD.MM.YYYY
BASED ON KITCHEN CONSULTANT ISSUE DD.MM.YYYY
CH= +2900MM AFFL. 09.001 CH= +2700MM AFFL. 09.001 CH= +2700MM AFFL. 09.001
POLISHED POLISHED POLISHED
PLASTER PLASTER PLASTER

CH= +2700MM AFFL. 09.001 CH= +2800MM AFFL. 09.001 CH= +2900MM AFFL. 09.001
POLISHED POLISHED POLISHED
PLASTER PLASTER PLASTER
IN TERRACOTA

- 21.10.22 AH 50% DETAILED DESIGN SUBMISSION

rev. date name description

1 REFLECTED CEILING PLAN
SCALE 1:50 Consultant:
-

CEILING LEGEND: NOTE 1: READ THIS DRAWING IN CONJUNCTION WITH ALLFURNITURE,

SYMBOL DESCRIPTION SYMBOL DESCRIPTION
CEILING AND ELECTRICAL LAYOUTS, SECTIONS AND ELEVATIONS,
DETAIL DRAWINGS AS APPROPRIATE, FIXED FINISHES AND FF&E
EMERGENCY LIGHTING SPECIFICATION AND FINAL LAYOUT BY SPECIFICATION SHEETS. ALL LIGHTING CIRCUITS ARE TO BE
CEILING MOUNTED AC SUPPLY GRILLE - SPECIFICATION BY SPECIALIST,
SPECIALIST, LAYOUT SHOWN I.D. INTENT ONLY, LAYOUT TO BE ZONED AS CONSIDERED APPROPRIATE TO THE INDIVIDUAL AREAS
E GRILLE DESIGN TO BE APPROVED BY LWD, LAYOUT SHOWN I.D. INTENT
APPROVED BY FIRE/ BUILDING REGULATIONS CONSULTANT AND AND CATEGORIZED INTO CONTROL ANDDIMMING CHANNELS. EACH
ONLY, LAYOUT TO BE APPROVED BY M.E.P CONSULTANT AND FINAL
FINAL REQUIRED LAYOUT APPROVED BY LWD AREA TO HAVE ITS OWN CONTROL PANEL/SCENE SETTER' WITH
REQUIRED LAYOUT IF AMENDED APPROVED BY LWD. ALL GRILLES TO BE
MOODS AGREED WITH OPERATOR/CLIENT, MEP CONSULTANT AND Client:
POWDER COATED TO MATCH CEILING FINISH.
FIRE SPRINKLER - SPECIFICATION AND FINAL LAYOUT BY SPECIALIST, LWDG. THE SPECIALIST CONTRACTOR IS REQUIRED TO ALLOCATE
S
LAYOUT SHOWN I.D. INTENT ONLY, LAYOUT TO BE APPROVED BY CEILING MOUNTED AC RETURN GRILLE - SPECIFICATION BY SPECIALIST, SUITABLE SPACE TO ACCOMMODATE APPROPRIATE DIMMING
FIRE/ BUILDING REGULATIONS CONSULTANT AND FINAL REQUIRED GRILLE DESIGN TO BE APPROVED BY LWD, LAYOUT SHOWN I.D. INTENT ONLY, CONTROL PANELS AND ASSOCIATED EQUIPMENT BASED ON MEYDAN CITY CORPORATION
LAYOUT APPROVED BY LWD. LAYOUT TO BE APPROVED BY M.E.P CONSULTANT AND FINAL REQUIRED NUMBERS OF CIRCUITS, SIZES AND CAPACITY. THE SPECIALIST
LAYOUT IF AMENDED APPROVED BY LWD. ALL GRILLES TO BE POWDER CONTRACTOR MEP CONSULTANT IS TO CONFIRM ALL SIZES OF
FIRE SPEAKER - SPECIFICATION BY SPECIALIST, LAYOUT SHOWN I.D. LIGHTING TYPES, TRANSFORMERS, ETC FOR INCORPORATION INTO
FS COATED TO MATCH CEILING FINISH.
INTENT ONLY, LAYOUT TO BE APPROVED BY FIRE/ BUILDING FIT OUT CONTRACTOR'S JOINERY AND GENERAL SHOP DRAWINGS Project Name:
REGULATIONS CONSULTANT AND FINAL REQUIRED LAYOUT FOR FULL APPROVAL PRIOR TO ANY MANUFACTURE AND SITE
BULKHEAD MOUNTED AC SUPPLY GRILLE - SPECIFICATION BY SPECIALIST,
APPROVED BY LWD. INSTALLATION.
GRILLE DESIGN TO BE APPROVED BY LWD, LAYOUT SHOWN I.D. INTENT ONLY,
LAYOUT TO BE APPROVED BY M.E.P CONSULTANT AND FINAL REQUIRED BAB AL SHAMS, DESERT RESORT AND SPA
SD SMOKE DETECTOR - SPECIFICATION BY SPECIALIST, LAYOUT SHOWN
LAYOUT IF AMENDED APPROVED BY LWD. ALL GRILLES TO BE POWDER NOTE 2: ALL CEILING LEVELS ARE TAKEN FROM FFL BEING +0.00MM DUBAI U.A.E.
I.D. INTENT ONLY, LAYOUT TO BE APPROVED BY FIRE/ BUILDING
REGULATIONS CONSULTANT AND FINAL REQUIRED LAYOUT COATED TO MATCH CEILING FINISH.
NOTE 3: ACCESS PANEL LOCATIONS REQUIRED FOR MECHANICAL AND
APPROVED BY LWD.
BULKHEAD MOUNTED AC RETURN GRILLE - SPECIFICATION BY SPECIALIST, ELECTRICAL TO BE LOCATED ON MEP DRAWINGS AND APPROVED Drawing Title:
AUDIO SPEAKER - SPECIFICATION BY SPECIALIST, GRILLE DESIGN TO BE APPROVED BY LWD, LAYOUT SHOWN I.D. INTENT ONLY, BY LW DESIGN.
SP
LAYOUT SHOWN I.D. INTENT ONLY, LAYOUT TO BE APPROVED LAYOUT TO BE APPROVED BY M.E.P CONSULTANT AND FINAL REQUIRED PUBLIC AREAS
BY A.V. CONSULTANT AND FINAL REQUIRED LAYOUT LAYOUT IF AMENDED APPROVED BY LWD. ALL GRILLES TO BE POWDER NOTE 4: ALL PUBLIC AREA LIGHTING, AIRCONDITIONING, VIDEO, AUDIO,
KID'S CLUB
IF AMENDED APPROVED BY LWD. COATED TO MATCH CEILING FINISH. SWITCHING AND ALARMING SYSTEMS, ETC.TO BE TO THE MEP
CONSULTANT'S CO-ORDINATED DESIGN AND DETAIL AND FIRST FLOOR
CEILING MOUNTED W.C. RETURN - SPECIFICATION BY SPECIALIST, FASCIA TO SWITCHED IN CONVENIENT BACK OF HOUSE AGREED LOCATION IN REFLECTED CEILING PLAN
SW SUBWOOFER TO BE RECESSED INTO CEILING. CONTRACTOR TO
SUBMIT SHOP DRAWING FOR LWD APPROVAL. BE APPROVED BY LWD, LAYOUT SHOWN I.D. INTENT ONLY, LAYOUT TO BE CONJUNCTION WITH AND TO THE FULL REQUIREMENTS OF THE
APPROVED BY M.E.P CONSULTANT AND FINAL REQUIRED LAYOUT IF OPERATOR AND LW DESIGN APPROVAL.
LIGHTING CONSULTANTS SUPPLY DETAILS AND SPECIFICATION AMENDED APPROVED BY LWD. 1:50 RG AH DETAILED DESIGN
Scale @ A1: Drawn by: Checked by: Issue Status:

Drawing Number
CEILING FAN AIR CURTAIN
4775 LW INT DWG 09 102 -
Project No. Originator Discipline Doc. Type Zone Number Revision