The VHP Series Five Family

Just Got More Powerful

Now including the 2,500 HP P9394GSI S5

• More Power Across the Series Five Family:

- P9394GSI S5: 2,500 HP @ 1,200 rpm
- L7044GSI S5: 1,900 HP @ 1,200 rpm
- L7042GSI S5: 1,500 HP @ 1,200 rpm
• Better Fuel Flexibility
• Improved Performance at Higher Ambient Temperatures
• Reduced Fuel Consumption
• *Indicates
Lower Lifecycle
a trademark ofCosts
INNIO & Extended Service Intervals
Working Smarter, Not Harder
Waukesha Series Five rich-burn engines combine advanced technology from INNIO
with the history and experience of the VHP platform.
The Series Five family of engines now includes the 2,500 hp P9394GSI S5 in addition
to the 1,900 hp 7044GSI S5 and 1,500 hp 7042GSI S5. All three engines provide more
power, better fuel flexibility, improved performance at higher ambient
temperatures, lower fuel consumption and lifecycle costs, and longer service
intervals than previous models. A common ESM2 control system and service parts
across Series Five simplifies operation, maintenance, and troubleshooting.
The 1,500 hp L7042GSI S5 provides the same benefits as the L7044GSI S5 and
P9394GSI S5, with even better flexibility. There is no fuel derate with the L7042GSI S5.
When paired with a three-way catalyst, the L7042GSI S5 can operate at nearly any
site and provide the full 1,500 hp rating while meeting strict emissions standards.
These power increases and performance improvements come without raising
temperatures or pressures beyond other VHP models, illustrating why Series Five
engines are working smarter, not harder.

Series Five Performance Data

L7042GSI S5 L7044GSI S5 P9394GSI S5

Power @ RPM 1,500 hp @ 1,200 rpm 1,900 hp @ 1,200 rpm 2,500 hp @ 1,200 rpm

BSFC (Btu/bhp-hr; -0/+5% LHV) 7209 7063 6972

4,800 ft @ 100° F 5,000 ft @ 100° F

Altitude Capability Before Derate 4,000 ft @ 120° F
4,000 ft @ 120° F 4,200 ft @ 120° F

Ambient Capability Before Derate 120° F 120° F 120° F

55 WKI 58 WKI
Fuel Derate Begins No Fuel Derate
(~1,250 Btu/ft3 LHV) (~1,225 Btu/ft3 LHV)

Power @ 35 WKI (2,350 Btu/ft3 LHV) 1,500 hp 1,600 hp 2,135 hp

Spark Plug Interval 4,000 hours 4,000 hours 4,000 hours

Oil Change Interval 4,000 hours 4,000 hours 4,000 hours

% Change in Operating Cost vs

-12% -22% -15%
Previous Model ($/hp-hr)

2
The Series Five Story

Although Series Five engines are The improved cylinder head design Series Five engines come standard
capable of higher power levels than reduces key internal temperatures by with ESM2, INNIO’s next-generation
previous versions, the stresses on the up to 40%, improving reliability and engine controller. ESM2 uses a 12” full
components have not increased. This extending the life of the head. color customer interface panel,
is made possible by enhanced allowing users to see all engine
The Series Five piston design has been
rich-burn combustion through the parameters, trend data, view manuals,
optimized to reduce unburned
Miller Cycle, a modified cylinder head and walk through troubleshooting
hydrocarbons, which improves
design that reduces temperatures in steps, eliminating the need for a
emissions and fuel consumption while
key regions, and an optimized piston laptop computer.
lowering the temperature of the piston
design. itself, providing better fuel flexibility INNIO’s emPact Emission Control
Used previously on VHP engines, the even at a higher power rating. System is the option of choice for
Miller Cycle moves work from the reducing emissions below 0.15 g/
Improvements to the ignition system
piston to the turbocharger, reducing bhp-hr of NOx and 0.30 g/bhp-hr of
allow for 4,000-hour spark plug
combustion and exhaust CO. emPact optimizes the interaction
intervals with low-cost, non-precious
temperatures and making the Series between the Series Five engine, AFR2
metal plugs. Matching 4,000 oil
Five the most fuel efficient VHP ever, air/fuel ratio control, and the INNIO-
change intervals reduce operating
even though it's a rich-burn engine. supplied 3-way (NSCR) catalyst to
costs and trips to site.
maintain emissions compliance even
as engine speed, load, fuel, and
environmental conditions change. 3
 Series Five Benefits
Improved Fuel Flexibility Up to 22% Lower Operating Cost
Although the Series Five starts at a higher power rating • Reduced $/hr operating costs, even with increased
than previous models, improved fuel flexibilty helps ensure power
more power on more fuels thanks to Miller Cycle
• Non-precious metal spark plugs and next-generation
combustion, an improved piston design, and ESM2.
Ignition Power Module (IPMD2) extend spark plug
• 2,500 hp to 58 WKI (~1,225 Btu/ft3 LHV) on P9394GSI S5; intervals to 4,000 hours
2135 hp on 35 WKI (2,300 Btu/ft3 LHV) fuel
• Improved piston design extends oil change intervals to
• 1,900 hp to 55 WKI (~1,250 Btu/ft3 LHV) on L7044GSI S5; 4,000 hours
1,600 hp on 35 WKI (2,300 btu/ft3 LHV) fuel
• Fewer visits to engine reduces operating costs
• No fuel derate on L7042GSI S5; 1,500 hp on 35 WKI
The chart below shows the reduced lifecycle costs with
(2,300 btu/ft3 LHV) fuel
Series Five.
The chart below illustrates the fuel flexibility improvement
with Series Five compared to the previous version. Series Five Lifecycle Comparison
Lifecycle cost comparison
0.004
Series Five Fuel Flexibility Improvements 0.0035
0.003
2600 58 (12)%
0.0025
$/hp-hr

2400
(22)%
70 0.002
2200 0.0015
9394GSI 0.001
2000
9394GSI S5
0.0005
1800
0
L7044GSI L7042GSI S5 L7044GSI S5
2000 55 BHP 1680 1500 1900
Power (hp)

1800 45 58
Note: Chart data is representative only and may vary based on
1600
application, scope, etc.
1400
7044GSI
7042GSI S5
1200
7044GSI S5
1000
35 40 45 50 55 60 65 70 75 80 85 90
WKI

Btu/ft3 LHV 2300 1700 1350 1150 1000 900

4
 Increased Altitude and Ambient 7042GSI S5 Ultimate Flexibility
Capability The L7042GSI S5 provides the ultimate in application
flexibility. Because it uses the same components and has
Series Five achieves full power at up to 120° F ambient the same displacement as the 1,900 hp L7044GSI S5, the
temperature, providing more throughput in hot regions L7042GSI S5 operates at a lower BMEP, meaning it does not
such as West Texas and the Middle East. The altitude limits work as hard to achieve its 1,500 hp rating. This increases
without derate for Series Five are: the operating range, flexibility and reliability of the
• P9394GSI S5: full power to 120° F and 4,000 ft. L7042GSI S5.
• L7044GSI S5: full power to 120° F and 4,200 ft. or 100° F The L7042GSI S5 does not have a fuel derate, it makes the
and 5,000 ft. same 1,500 hp on 35 WKI (2,350 BTU/FT3 LHV) as it can on
sweet, commercial-quality natural gas. It also can make full
• L7042GSI S5: full power to 120° F and 4,000 ft. or 100° F
power with ambient temperatures up to 120° F.
and 4,800 ft.
The L7042GSI S5 can operate at 1,500 hp at virtually any site
These published ambient and altitude limits apply from
while meeting emissions requirements when paired with a
1,200 rpm down to 900 rpm; however, the L7042GSI S5 can
simple three-way (NSCR) catalyst, making this the ultimate
operate at full power at higher elevations when less speed
lease fleet engine.
turndown is required, as shown in the chart below:

L7042GSI S5 Altitude Capability without Derate

7042GSI S5

7000
Service Kits
Altitude Capability at
100° F for Given Speed
Upgrade existing engines to Series Five to get the
6000
Altitude Capability at
following benefits:
Elevation (ft)

120° F for Given Speed

5000 Published 100° F • Reduced operating cost
Altitude Capability
Published 120° F • Improved efficiency and reliability
4000 Altitude Capability
• Ability to increase power from 1,500 hp to 1,900 hp
3000 without changing engine hardware
900 1000 1100 1200
RPM

Most Fuel-Efficient VHP Ever

• 10% lower fuel consumption reduces carbon footprint
and emissions
• Rich-burn engines can be more fuel efficient than
lean-burn engines
• Reduced heat rejection allows for similar-size cooler
with higher power engine

5
Series Five Technology
Miller Cycle Enhanced Piston
Miller Cycle combustion modifies A new turbocharger match was used
on the Series Five to provide that
Design
valve timing to shift work from the
piston to the turbocharger. It also boost. Series Five turbochargers have Series Five uses a piston design that
reduces temperatures at the end of a 30,000 hour lifetime and are built decreases crevice volume. The result
the compression stroke. Miller Cycle with higher material specifications is:
combines the benefits of higher than previous models for better • 100° F temperature reduction in the
compression ratio pistons—improved reliability. critical area
power and reduced fuel
• Reduced carbon deposits for
consumption—with the improved fuel
increased robustness, durability,
flexibility typically seen with lower
and oil life
compression ratio pistons.
• Reduced fuel slip for improved
The Miller Cycle requires more boost
efficiency and lower hydrocarbon
than a traditional rich-burn engine.
emissions
• Improved fuel flexibility
The chart below shows the relative
Modified Cylinder The charts below show that worst-
temperature comparison between a
case exhaust valve and guide
Heads temperatures at 1,900 hp on a Series
Series Five piston and Series Four. At
the same 1,680 hp rating, the Series
Series Five engines use a Miller Cycle Five engine are lower than nominal
Five piston temperature is 131° F lower.
variant of the newest VHP rich-burn operating temperature on a 1,680 hp
At 1,900 hp, the Series Five piston is 101°
cylinder head design. Also released Series Four engine.
F lower than the Series Four piston
on higher temperature Series Four Again, this illustrates how the Series operating at 1,680 hp.
applications, these heads look Five engine makes more power
identical to previous versions from without increasing temperature. Piston Temperature Comparison
the outside, but have modified Relative to L7044GSI @ 1,680 hp
Series Five engines are working
internal passages to improve heat
smarter, not harder.
transfer and reduce temperatures 0
L7044GSI S5 @ 1680 hp L7044GSI S5 @ 1900 hp
∆ Temperature (F)

within the head.

-50

Series Five vs. Series Four -84

-70
-100 -85
Comparison - Exhaust Valve -101 -101

Temperature Series Five vs. Series Four -150 -131

top land 2nd land 3rd land

Series Four Series Five

Comparison - Exhaust Valve
Guide Temperature
0
L7044GSI S5 @ 1680 hp L7044GSI S5 @ 1900 hp top land
∆ Temperature (F)

2nd land
3rd land
-50

Series Four Series Five

Temperature (F)

-70
3% -100 -85 -84
-101 -101
5%
-150 -131
3%
top land 2nd land 3rd land
Temperature (F)

7044GSI 7044GSI 1680 hp @ 7044GSI S5 7044GSI S5 1900 hp @

1680 hp @ 1200 RPM 1200 RPM 1680 hp @ 1200 RPM 1200 RPM
90 WKI 58 WKI 90 WKI 55 WKI

Hotter, lower WKI fuels require the engine 7044GSI 7044GSI 1680 hp @ 7044GSI S5 7044GSI S5 1900 hp @
to retard timing to prevent knock. This 1680 hp @ 1200 RPM
90 WKI
1200 RPM
58 WKI
1680 hp @ 1200 RPM
90 WKI
1200 RPM
55 WKI
timing change increases temperatures
within the head. Similar to the exhaust valve, the worst-
The worst-case, highest temperature of case exhaust valve guide temperatures
the exhaust valve is 3% lower on a Series are lower on the 1,900 hp Series Five engine
Five engine than the best-case than the best-case temperatures on the
temperature on a Series Four engine, even 1,680 hp Series Four. A VHP Series Five piston after field
though Series Five operates at 1,900 hp vs validation illustrates reduced carbon
1,680 hp on a Series Four. deposits
6
ESM2
ESM2 is Distributed Power’s next- • Optimizes ignition timing based on • Incorporates Asset Performance
generation engine controller. fuel quality to increase power, fuel Management (APM) solution
Previously released on Series Four flexibility and efficiency, while through myPlant* software and
engines, it brings the following lowering temperatures mobile app, specially designed for
features and benefits to the Series reciprocating engine operators and
• Does not require a laptop for
Five: service
commissioning or parameter
providers, to:
• Provides a touch-screen HMI panel changes
with all operating parameters, fault - Monitor equipment health and
• Allows for proper engine lubrication
monitoring, and data logging diagnose faults
with oil pressure differential and oil
displayed in full color pressure permissive - Proactively manage asset
• Integrates a step-by-step performance with analytics
• Reads exhaust and main bearing
troubleshooting tool into the HMI temperatures for each cylinder;
panel provides ability to display alarms
and shutdown engine when values
are out of range

ESM2 HMI display panel operating on a L7044GSI S5 gas compression package

7
 INNIO is a leading solutions provider of gas engines, power
equipment, a digital platform and related services for power
generation and gas compression at or near the point of use.
With our Jenbacher and Waukesha product brands, INNIO pushes
beyond the possible and looks boldly toward tomorrow.
Our diverse portfolio of reliable, economical and sustainable industrial gas
engines generates 200 kW to 10 MW of power for numerous industries globally.
We can provide life cycle support to the more than 48,000 delivered gas engines
worldwide. And, backed by our service network in more than 100 countries,
INNIO connects with you locally for rapid response to your service needs.
Headquartered in Jenbach, Austria, the business also has primary operations in
Welland, Ontario, Canada, and Waukesha, Wisconsin, US.

Visit https://www.innio.com for more information on INNIO technology:

IWK-019012-EN

© Copyright 2019 INNIO. Information provided is subject to change without notice. All values are design or typical values when measured under
laboratory conditions. *Indicates a trademark of INNIO