SUNKOTE is a single component, elastomeric acrylic waterproof coating that can be applied by brush, roller, or spray. It is used to waterproof roofs, walls, and other surfaces. The coating provides high elasticity and resilience to withstand cracks and thermal movement. It is UV resistant, anti-fungal, and allows surfaces to breathe. SUNKOTE should be applied in 2-3 coats at a rate of 2-2.5 m2/kg per coat with 24 hours between coats. Proper surface preparation and use of a primer are required for application.
SUNKOTE is a single component, elastomeric acrylic waterproof coating that can be applied by brush, roller, or spray. It is used to waterproof roofs, walls, and other surfaces. The coating provides high elasticity and resilience to withstand cracks and thermal movement. It is UV resistant, anti-fungal, and allows surfaces to breathe. SUNKOTE should be applied in 2-3 coats at a rate of 2-2.5 m2/kg per coat with 24 hours between coats. Proper surface preparation and use of a primer are required for application.
SUNKOTE is a single component, elastomeric acrylic waterproof coating that can be applied by brush, roller, or spray. It is used to waterproof roofs, walls, and other surfaces. The coating provides high elasticity and resilience to withstand cracks and thermal movement. It is UV resistant, anti-fungal, and allows surfaces to breathe. SUNKOTE should be applied in 2-3 coats at a rate of 2-2.5 m2/kg per coat with 24 hours between coats. Proper surface preparation and use of a primer are required for application.
SUNKOTE is a single component, elastomeric acrylic waterproof coating that can be applied by brush, roller, or spray. It is used to waterproof roofs, walls, and other surfaces. The coating provides high elasticity and resilience to withstand cracks and thermal movement. It is UV resistant, anti-fungal, and allows surfaces to breathe. SUNKOTE should be applied in 2-3 coats at a rate of 2-2.5 m2/kg per coat with 24 hours between coats. Proper surface preparation and use of a primer are required for application.
SUNKOTE Single Component, UV Resistant, Elastomeric, High Build Waterproof Coating (Confirming to DIN 1048)
DESCRIPTION APPLICATION METHODOLOGY
SUNKOTE is a single component, elastomeric, Prepare the surface thoroughly by water based, acrylic waterproof coating for direct cleaning, washing and removing dust, dirt, application onto substrate using brush, roller or oil, grease and loose particles. spray. In existing roofs, the condition of the substrate must be checked. Damaged USES portions must be repaired with polymer It is used to waterproof all types of RCC modified mortar. surfaces such as roofs, chajjas, parapet walls Any bitumen based waterproofing coating and external walls, external walls sunken areas, must be completely removed prior to toilets etc. treatment by SUNKOTE system. Can be used for flat as well as sloping roofs, Surface cracks must be identified, cleaned existing and new and filled with POLYFILL AR as per Asbestos cement sheet roofs can also be specifications. waterproofed using scrim cloth at the junctions, Prime the surface. SUNPRIME is to be overlaps and J-bolts as reinforcement diluted in water in the 1:1 ratio at the rate of As a damp proof course applied under the first 8-10m²/kg/coat. Allow the primer to cure layer of bricks or blocks in masonry works before application of subsequent coats. Alternatively even POLYALK WP as per specifications can be used as primer in ADVANTAGES certain cases. High build, strong, thick, elastomeric, liquid Coating: Two-Three coats of SUNKOTE are applied waterproofing membrane system recommended. Apply first coat at the rate of Makes for a highly elastic & resilient coating to 2 - 2.5 m²/kg/coat. No need to dilute with withstand cracks up to 2 mm as well as water. accommodate thermal movements Apply the subsequent coats of SUNKOTE at Resistant to UV with Anti Fungal properties the rate of 2 - 2.5 m²/kg/coat with an interval Higher tensile strength, tear resistance & of 24 hours between coats. The second adhesion to substrate coat to be applied perpendicular to the first Single component and easily brush, roller or coat which ensures uniform masking & even spray applied application. Non-toxic in nature and the membrane allows If a protective coat is required, then concrete surface to breathe broadcast sand at the rate of 1kg/m² over Can be applied on damp surfaces the 3rd coat of SUNKOTE while it is still tacky. This will provide a mechanical key for bonding of the protective screed layer. Allow the membrane to cure for 24-48 hours and carry out a protective screed layer with adequate slope.
www.sunandaglobal.com SUNANDA SPECIALITY COATINGS PVT. LTD. ISO 9001:2015 COMPANY
TYPICAL PROPERTIES HAZARDS IDENTIFICATION
Method of Application Brush/Roller/Spray Health hazards: No particular hazard known. If the product spills on to the skin and dries Appearance Off White coating up, some irritation may occur. Solids > 65% pH 8.5 - 10.5 ACCIDENTAL RELEASE MEASURES Elongation at break @ 400% Environment Care: Clean small spillages (ASTM D 638) immediately with water. Contain large Coverage 2 - 2.5 m²/kg/coat spillages with suitable absorbent materials. Dispose the waste water / absorbent Tensile Strength 150 psi material in accordance with local regulations. (ASTM D 412) PRECAUTIONS Water Permeability Zero Do not dilute SUNKOTE with water. (DIN 1048) Proper surface preparation is a must. Flexibility Conforms to IS 101 Always use a primer as a prerequisite. Adhesion Conforms to IS 101 Repair existing damage and cracks on the Shelf life at 25ºC 1 year in tightly sealed roof before application of SUNKOTE. container QUALITY ASSURANCE Packing 20 kg HDPE buckets All products are manufactured under a Quality Management System for Design, Manufacturing FIRST AID MEASURES and Selling of Construction Chemicals as per the Skin contact: Immediately wash thoroughly with standards of ISO 9001:2015. soap and water. Inhalation: Remove to open air. Contact with eyes: Immediately wash under running water with eyelids open for at least 15 minutes. Seek medical attention. Ingestion: Rinse mouth thoroughly and drink plenty of water. Seek medical attention.
DISCLAIMER This information is accurate and reliable to the best of the knowledge. It is meant as a guideline only. Sunanda Speciality Coatings Pvt. Ltd. (SSCPL) cannot give any guarantees under any circumstances for the results, or assume any obligation or liability in connection with the use of this information. It is recommended that the product be tested to determine its suitability for specific applications. Since, SSCPL has no control over how others may use its products; it is recommended that the Specifier, Architect, Engineer, Contractor and Owner assume all the responsibilities in connection therewith.
