Torque g04 Basic e

Basic Manual
Safety Precautions
Getting Ready
G04 Basic Operations
Telephone
Appendix
This manual is based on the contents of Android™ 9 Pie.

For the latest version of the manual, refer to the "Online Manual" (Japanese) or
" 取扱説明書詳細版 (Full Instruction Manual)" (Japanese) on the au website.
https://www.au.com/support/service/mobile/guide/manual/
Preface
Thank you for purchasing the "TORQUE G04"
(simply called the "product" or "main unit" from here
on). Battery pack (KYV46UAA) LOCK Rotating Tool (Sample)
Before using the product, be sure to read "Basic
Manual" (this manual) to ensure correct use.
After you have finished reading this manual, store
it in a safe place so you can retrieve it whenever
you need it.
List of Packaged Items Hexagon Wrench (Sample)
• 取扱説明書 (Basic Manual) (Japanese)

Before you start using the product, make sure that
• 設定ガイド (Setting Guide) (Japanese)
you have all the following packaged items with the
product.
The following items are not included in the
package.
・AC adapter ・KYOCERA 3.5ΦType-C
・USB Type-C cable conversion cable
・Wireless Charging (0401QNA)
Pad ・microSD memory card
・Earphone
Main unit Back cover (KYV46TLA,

* Sheet pasted on KYV46TRA, KYV46TKA)
front screen * Installed on back
of main unit
1
■"取扱説明書詳細版 (Full Instruction
Manual)" (Japanese)
◎ Purchase a specified charger (sold separately).
◎ Illustrations of cell phones in this manual are only For detailed descriptions of various functions, refer
for reference. They may look different from the to the "取扱説明書詳細版 (Full Instruction Manual)"
actual product.
(Japanese) available on the au homepage:
(https://www.au.com/support/service/mobile/
Operating Instructions guide/manual/)
■ "Setting Guide" and "Basic

　　
Manual" (This manual)
Handles only basic operations for main features.
■ "Online Manual" (Japanese)
■ TORQUE Special Site
For detailed descriptions of various functions, refer
https://www.kyocera.co.jp/prdct/telecom/torque/
to the "Online Manual" (Japanese) available on au
(Japanese)
homepage:
Home screen → [ ] → [サポート (Support)] → [取扱 ■ TORQUE Product Information
説明書 (Online Manual)] https://www.kyocera.co.jp/prdct/telecom/
consumer/lineup/g04/ (Japanese)
For detailed descriptions of various functions, refer

to the "Online Manual" (Japanese) available on the
au homepage:
https://www.au.com/online-manual/kyv46/
2
Illustrations and
l F
(Volume down button) (Power button)
Descriptions in This Manual r
(Volume up button)
■ Note on Button Illustrations
In this manual, the button illustrations are
simplified as shown below.
CH N
Navigation bar
d k
(Direct button) (Camera button)
3
■ Description of Operations for ■ Notes on Illustrations/Screenshots
Selecting Item/Icon/Button, etc. In this manual, screenshots and operations for
the product with au Nano IC Card 04 attached are
Notations used for operation procedures in this
described.
manual are as follows.
The illustrations and screenshots in this manual
Description Explanation may look different from the actual product or
Home screen → Tap " " at the bottom of the screens. In some cases, minor details or a part of a
[ ] → "DIALPAD" home screen. And after tapping screen may be omitted.
tab → [1] [4] [1] "DIALPAD" tab, tap " ", " ",
→[ ] and " ", then Example in
tap " " at the end Actual screen this manual
Some
Home screen → Tap " " at the bottom of icons etc.
[ ] → [Settings] the home screen. And tap
are
"Settings" on the displayed
omitted in
apps list.
this
In sleep mode, In sleep mode, press F
manual.
F (Power (Power button).
button)
• Tapping is to select a button or icon displayed on
the display by lightly tapping it with your finger.
4
◎ In this manual, screenshots for body color "Blue"
are provided as examples.
◎ In this manual, the operations with vertically
oriented screens are provided as examples.
With horizontally oriented screens, descriptions
for menu item/icon/onscreen button may be
different.
◎ In this manual, "au Nano IC Card 04" is
abbreviated as "au IC card".
◎ In this manual, "microSD™ memory card
(commercially available)", "microSDHC™ memory
card (commercially available)" and "microSDXC™
memory card (commercially available)" are
abbreviated as "microSD memory card" or
"microSD".
◎ All of the indicated amounts exclude tax unless
otherwise specified.
◎ Company names and product names referred
to in this manual are trademarks or registered
trademarks of the respective companies. TM or ®
may be omitted in this manual.
◎ Menu items, layers and icons described in this
manual may be different according to functions
and conditions to use.
5
Basic Operations...................................................... 72
Contents Using the Home Screen........................................... 72
Activating the Apps................................................... 72
Preface............................................................................... 1 Switching the Home App......................................... 72
List of Packaged Items................................................ 1 Monitoring the Product's Status........................... 73
Operating Instructions................................................. 2 Setting Silent Mode.................................................... 75
Illustrations and Descriptions in This Manual..... 3 Setting Airplane Mode.............................................. 76
Checking Your Phone Number............................... 77
Contents......................................................................... 6 Using the Fingerprint Function.............................. 77
Registering Fingerprints.......................................... 77
Safety Precautions..................................................... 7 Authenticating with Fingerprints.......................... 78
When Using the Product............................................. 7 Displaying Menu.......................................................... 78
Safety Precautions (Observe Strictly).............. 10 Setting Home Screen................................................ 78
Material List.................................................................. 23 Saving Battery Consumption................................. 79
Handling Precautions................................................ 24 Charging Other Mobile Devices............................ 79
Notes on Water, Dust, Seawater, and Shock Telephone.................................................................... 81
Resistance..................................................................... 33
Notes on Using Bluetooth®/Wireless LAN Making a Call................................................................ 81
(Wi-Fi®) Function.......................................................... 44 Receiving a Call........................................................... 81
Security Code/PIN Code.......................................... 46 Making a Call from Contacts.................................. 81
Notes on Data Communication Charges........... 48 Appendix...................................................................... 82
Notes on Applications............................................... 49
Setting the App Permissions................................. 49 Updating Software..................................................... 82
Cell Phone Etiquette.................................................. 50 Troubleshooting........................................................... 83
After-Sales Service.................................................... 87
Getting Ready............................................................ 52 SIM Unlock.................................................................... 90
Names and Functions of Parts.............................. 52 Related Accessories................................................. 91
Attaching/Removing the Front Cover................ 55 Using Earphones......................................................... 92
Attaching/Removing the Battery Pack.............. 56 Main Specifications.................................................... 93
au IC Card (SIM Card).............................................. 60 Specific Absorption Rate (SAR) of Cell
Attaching/Removing au IC Card........................... 61 Phones............................................................................ 95
Attaching/Removing microSD Memory Card.... 63 FCC Notice.................................................................... 96
Charging......................................................................... 64 Export Administration Regulations...................... 98
Turning the Power On/Off....................................... 69 Intellectual Property Rights.................................... 99
Switching to English Display.................................. 70
6 Start Screen................................................................. 71
Safety Precautions
When Using the Product • Communication is not possible even inside

the service area in places where the signal
• Before you start using the product, be sure
does not reach (e.g. tunnels and basements).
to read "Safety Precautions" in this manual to
Also, communication may not be possible in
ensure correct use.
poor reception areas. Communication may be
• Before you assume that the product is
interrupted if you move into poor reception areas
malfunctioning, check for possible remedies in "ク
Safety Precautions
during communications.
イック診断 (Quick check)" and "トラブル診断 (Trouble
• Since this product uses radio waves, the
check)" on "故障紛失サポート (Repair and Delivery
possibility of communication intercepts by third
Support)" app.
parties cannot be eliminated (though the LTE/
■ Quick check
WiMAX 2+/GSM/UMTS system has highly secure
Home screen → [ ] → [サポート (Support)] →
confidential communication features).
[故障紛失サポート (Repair and Delivery Support)]
• VoLTE (LTE network) by au is used when
→ [クイック診断してみる (Try quick check)]
connecting with emergency call receiving
(Displayed language is Japanese only)
agencies within Japan. You cannot connect using
■ Trouble check
3G (circuit-switched network).
Home screen → [ ] → [サポート (Support)] → [故
• The product is compatible with au World Service.
障紛失サポート (Repair and Delivery Support)] →
Each network service described in this manual
[便利な機能 (Useful functions)] → [トラブル診断を
varies depending on the area and service content.
試す (Try trouble check)] (Displayed language is
• Since the product is a radio station under the
Japanese only)
Radio Law, you may be asked to temporarily
Also available on the following au home page.
submit the product for inspection in accordance
https://www.au.com/trouble-check/ (Japanese)
with the Radio Law.
7
• The IMEI information of your cell phone is • Captured image data or downloaded data may
automatically sent to KDDI CORPORATION for sometimes be altered or lost due to faults, repair
maintenance and monitoring operational status or other handling of the product. The Company is
of your cell phone. not liable for any damage or lost income resulting
• If you are using the product overseas, check the from recovery of these data.
relevant laws and regulations of the country/ • It is recommended you keep a copy of important
region you visit beforehand. data on your PC's hard disk, etc. Whatever the
• The Company is not liable for any damages cause of the defect or malfunction may be, the
arising from earthquakes, lightning, storms, Company assumes no responsibility for alteration
floods or other natural disasters, as well as or loss of saved data.
fires, actions by third parties, other accidents, • Contents saved in the product, such as contacts,
Safety Precautions
intentional or mistaken operation by the mails and favorites might be altered or lost by
customer, or use under other unusual conditions an accident, fault, repair or mishandling. Be sure
outside the responsibility of the Company. to keep a copy of important contents. Note that
• The Company is not liable for any incidental the Company assumes no responsibility for any
damages (change/disappearance of saved damages or lost profits resulting from altered or
content, loss of business income, disruption of lost contents.
business, etc.) arising from use of or inability to • Note that content data (both charged or free of
use the product. charge) saved on the product cannot be returned
• The Company is not liable for any damages to the customer when the product is replaced for
arising from failure to observe the described repair of a fault, for example.
content of this manual. • The product uses liquid crystal for its main
• The Company is not liable for any damages display. The main display response speed may
arising, for example, from malfunction caused by become slow when the ambient temperature is
combination with connected devices or software low, which is due to the characteristics of liquid
not related to the Company. crystal and is not a malfunction. The main display
response speed will return to normal at room
temperature.
8
• Although the display used on the product is made
using high-precision technology, some pixels
(dots) might be lit or out at all times. This is not a ◎ Reproduction of the content of this manual in
malfunction. part or in whole is prohibited.
• You are recommended to store copies of ◎ The content of this manual is subject to change
individual data such as photos/movies you took without notice.
and music in your PC by sending each file as mail ◎ Due to the specification changes of the operating
system or termination of the services, some
attachment, etc. Note, however, that you may not
features become unavailable.
be able to make copies of some copyrighted data
◎ Every effort has been made in the preparation
even by the above-mentioned means. of this manual. Should you notice any unclear
• Do not discard the old product together with
Safety Precautions
points, omissions, etc., feel free to contact us.
regular trash. Please cooperate in the collection
of the product (including optional parts) when it
is no longer needed to protect the environment
and effectively use resources. Old products are
collected at au shops and other places.
* "The Company" as appears in this manual refers to the following
companies:
Sold by: KDDI CORPORATION, OKINAWA CELLULAR
TELEPHONE COMPANY
Manufactured by: KYOCERA Corporation
9
*2 Minor injury: This refers to injuries, burns (high- and low-
Safety Precautions (Observe temperature), electric shock, etc. that do not
require hospital admission for treatment or long-
Strictly) term hospital attendance as an outpatient.
*3 Physical damage:This refers to extended damage to buildings,
■ Before using the product, thoroughly read this furniture, livestock or pets.
"Safety Precautions" for proper use. Please keep ■ Explanation of Graphic Symbols
this manual carefully after reading it.
Used in This Manual
■ These precautions describe instructions that
should be observed to prevent injury to the Indicates that
Indicates an
customer and others, or damage to property handling with
action that is
using the product. wet hands is not
not allowed.
Safety Precautions
■ The signs below differentiate between the levels allowed.

of danger that can occur if the product is not Indicates an
Indicates that
used within the specified guidelines. action based on
disassembly is
instructions that
This sign denotes that "death not allowed.
must be done.
DANGER or serious injury*1 may directly
result from improper use".
Indicates
that use in a
This sign denotes that place where Indicates that the
the product is power plug must
WARNING "death or serious injury*1 may
result from improper use". likely to get be disconnected
wet or allowing from the power
This sign denotes that the product to outlet.
"minor injury*2 or damage to get wet is not
CAUTION property*3 may result from allowed.
improper use".
*1 Serious injury: This refers to loss of sight, injury, burns (high-
and low-temperature), electric shock, broken
bones, injuries with residual aftereffects from
poisoning, etc., and injuries requiring hospital
admission for treatment or long-term hospital
10 attendance as an outpatient.
■ Precautions Common to the Main Do not charge when the product is wet with
water (drinking water, perspiration, seawater,
Unit, Battery Pack, Charger, au urine of pet animals, etc.).
IC Card, LOCK Rotating Tool Do not use it near water, such as in a
bathroom.
(Sample), Hexagon Wrench Doing so may cause fire, burns, injuries, or
(Sample), Peripheral Devices electric shock.
For details on water resistance, refer to the
following.
DANGER ▶P.‌33 "Notes on Water, Dust, Seawater, and
Shock Resistance"
Do not use, store or leave the product in hot
Do not subject the product to strong pressure
Safety Precautions
places (e.g. by the fire, near a heater, under a
or break the product. Especially when bringing
kotatsu or futon, in direct sunlight, in a car in
the product putting in a pocket of clothes, do
the hot sun).
not let the product hit against surroundings or
Doing so may cause fire, burns, injuries, or
being put between the objects.
electric shock.
Doing so may cause fire, burns, or injury due to
Do not put the product into or near a heating battery damage.
cooking device such as a microwave oven or * Examples to avoid
IH cooker, or high-pressure container such as ・ Sitting or squatting with the product put in
a pressure cooker. a pocket of trousers or skirt
Doing so may cause fire, burns, injuries, or ・ Putting the product in a pocket of outer
electric shock. wear and catching them in a door or a door
of car
Do not put sand, dirt, or mud on the product ・ Stepping on the product on a soft object
or put it on them directly. Do not touch the such as a sofa, bed, or bedding, or on a floor
product with hands to which sand or others
adhere. Do not disassemble or modify.
Doing so may cause fire, burns, injuries, or Doing so may cause fire, burns, injuries, or
electric shock. electric shock.
For details on water/dust resistance, refer to
the following.
▶P.‌33 "Notes on Water, Dust, Seawater, and
Shock Resistance"
11
Do not let the product get wet with water Do not allow conductive materials (metal
(drinking water, perspiration, seawater, urine pieces, pencil lead, etc.) to come in contact
of pet animals, etc.). with the charging terminal or the external
Doing so may cause fire, burns, injuries, or connection terminal, and do not allow dust to
electric shock. get inside.
For details on water resistance, refer to the Doing so may cause fire, burns, injuries, or
following. electric shock.
Do not cover or wrap the product with
Shock Resistance"
bedding, etc. while using or charging the
Do not put water (drinking water, perspiration, product.
seawater, urine of pet animals, etc.) into the Doing so may cause fire or burns.
charging terminal or the external connection
Safety Precautions
Do not adhere anything metal (stickers, etc.

terminal.
containing metal) between a wireless charger
product (sold separately) and the back of the
electric shock.
product, or the back cover or battery cover.
For details on water resistance, refer to the
Doing so may cause fire, burns, or injuries.
following.
▶P.‌33 "Notes on Water, Dust, Seawater, and Do not place anything metal (straps, clips, etc.
Shock Resistance" containing metal) between a wireless charger
product (sold separately) and the back of the
Use the optional products specified by au.
product.
Not doing so may cause fire, burns, injuries, or
electric shock.
Before charging with a wireless charger
product (sold separately), first remove any
WARNING commercially available cover, etc. attached to
the product.
Do not drop, trample, or throw the product or The material and thickness of the cover or any
give a strong force or vibration to it. foreign matter such as dirt caught between
Doing so may cause fire, burns, injuries, or the product and the cover may prevent normal
electric shock. charging and cause fire, burns, or injuries.
12
Turn the product off near precision control Follow the instructions given by the respective
and faint-signal electronic devices. institution regarding the use of the product in
Radio waves may cause malfunctioning or a gas station.
otherwise affect the electronic devices. Do not charge the product in a gas station.
*Examples of electronic devices to be careful Be careful not to drop the product in a place
of hearing aids, implanted cardiac pacemakers like a gas station, especially when you put gas
and implanted defibrillators, other medical into a vehicle.
electrical devices, other automatic control Using the product in places where a flammable
devices, etc. Those who use an implanted gas can be generated may cause an explosion
cardiac pacemaker, implanted defibrillator, or fire.
or other medical electrical device should
Perform the following operations while using,
check with the manufacturer of the medical
charging, or keeping the product if there are
Safety Precautions
electrical device or where they purchased the
odors, noise, smoke, overheating, discoloring,
device with regard to how it may be affected
deformation, or other abnormalities.
by radio waves.
・ Remove the power plug from the wall outlet.
If charging is not completed after the specified ・ Turn the product off.
charging time, stop charging. ・ Remove the battery pack from the product.
Overcharging may cause fire, burns, or injuries. Not doing so may cause fires, burns, bodily
injury, electric shock, etc.
Make sure to turn off or stop charging the
product before you get close to places where
a flammable gas or dust can be generated.
Using the product in places where a flammable
CAUTION
gas can be generated may cause an explosion
or fire. Do not use the damaged product.
Do not leave the product on unstable or

sloping surfaces. Be careful especially when
the product is set to vibrate.
The product may fall and cause injuries.
13
Do not use or store the product in humid or ■ Main Unit
dusty places, or places that get hot.
Doing so may cause fire, burns, or electric
shock. DANGER
For details on water/dust resistance, refer to
Do not throw the main unit into fire or apply
the following.
heat.
Shock Resistance"
Do not apply excessive force such as sticking
When children use the product, do not let
a sharp-edged tool (nail, etc.) into the product,
them use incorrectly without instruction by an
hitting it with a hard tool (hammer, etc.), or
adult for proper use.
stepping on it.
Doing so may cause injuries.
Safety Precautions

Do not store the product within the reach of If the substance inside the main unit comes
small children. into contact with your eyes or mouth,
Be careful especially when you store the small immediately rinse the area with clean water,
parts such as a LOCK Rotating Tool (sample) and then see a doctor right away.
or a hexagon wrench (sample). Not doing so may cause loss of sight or poor
Not doing so may cause accidental swallow, physical condition due to the influence of the
injuries, or electric shock. substance, etc. inside the main unit.
Be careful when using the product
continuously or charging as it gets hot. Also,
avoid touching the product continuously while
putting the product in a pocket of clothes or
falling asleep unintentionally.
The product or specified charger (sold
separately) may become hot when
using applications, calling, doing data
communication, watching videos continuously,
or while charging. Depending on your physical
predisposition and physical condition,
contacting with a high temperature part
continuously may cause skin redness, itching,
14 rash, or low-temperature burns.
Do not expose the camera lens to direct
WARNING sunlight for an extended period.
Doing so may cause fire, burns, or injuries by
Do not lighten or flash the lighting part of the light-collecting mechanism of the lens.
the light close to person's eye. Be especially
careful to keep a sufficient distance from When sounding the buzzer, do not sound it
small children. close to your ear.
Not doing so may cause vision disturbance. Doing so may cause hearing impairment or
Also, it may cause an accident such as injuries other difficulty.
due to dizziness or shocks. Turn off the product or set it to Airplane mode
Do not lighten or flash the light to point at the before going aboard an airplane.
eyes of someone driving a car, etc. Since using the product on airplanes is
Safety Precautions
Doing so may interfere with driving and cause restricted, follow the instructions given by the
an accident. respective airlines.
The product's signals may adversely affect on-
Do not watch a repeatedly flickering screen board electronic equipment.
for a long time. If you commit a prohibited act while using the
Doing so may cause muscle spasms or loss of product on an airplane, you might be punished
consciousness, etc. by law.
Do not allow water or other liquids (drinking Follow the instructions given by the respective
water, perspiration, seawater, urine of pet medical institution regarding the use of the
animals, etc.), metal pieces, flammable product in a hospital.
material or foreign object into the au IC card/ Turn off the product in areas where the use of
microSD card slot on the product. the product is prohibited.
Do not mistake the place and direction of the The product's signals may affect electronic
au IC card or the microSD memory card. equipment and electronic medical equipment.
electric shock.
15
When using the handsfree call, ringtone is When the display or camera lens is accidentally
ringing loudly, or in the standby mode, be sure broken, be careful of broken glass or exposed
to keep the product off of the ears. internal parts of the product.
Also, when playing games, video, or music Not doing so may cause burns, injuries, or
with an earphone microphone connected to electric shock with damaged parts or exposed
the product, adjust the volume to the proper parts.
level.
Prevent a pet from biting the product.
When using the handsfree call, note that the
Not doing so may cause fire, burns, or injuries
speaker may emit loud sound.
due to battery ignition, rupture, overheat, or
Ringtone or alarm sound can be heard even in
leak.
the standby mode.
Turning the sound on with the volume set too
Safety Precautions
loud or using the product continuously for a

long time may adversely affect your ears. CAUTION
Doing so may prevent surrounding sound from
Do not swing the product around by holding
being heard, causing an accident.
strap, etc.
If you have a weak heart, be careful when Doing so may cause an accident.
setting the ringtone vibration and incoming
Before calibrating the Compass, check for
volume.
safety around you, hold the product firmly, and
Sudden ringtone vibration and ringtone
do not wave the product more than necessary.
surprise you, and it may cause harmful effect
Doing so may cause an accident.
on heart.
If the display breaks and the fluid, etc. leaks
To use electronic medical equipment,
out from inside, do not let the fluid contact
check with electronic medical equipment
with the skin on your face or hands or clothes.
manufacturer or vendor to determine how
Doing so may cause eye or skin problems.
devices are affected by radio waves before
If the internal matter comes into contact with
using.
your eyes, mouth, skin or clothes, immediately
Radio waves may affect the performance of
rinse the contacted area with clean water.
electronic medical equipment.
If the fluid enters your eyes, mouth etc.,
immediately see a doctor after rinsing.
16
Do not forcibly remove the back cover. Make sure that there is no adhered metal
This can damage the back cover and may pieces (cutter blade, staples, etc.) as the
cause injuries. speaker or camera part of this product
generates magnetism.
Be careful not to get your finger or a part of
Not doing so may cause injuries with adhered
your body caught when installing the back
metal pieces.
cover.
Doing so may cause injuries. Use the product in a well-lighted area and put
some distance between you and the display
Do not use the product without the back
when watching the display.
cover.
Using the product in dark places or near eyes
Doing so may cause burns, injuries, or electric
may affect your vision.
shock.
Safety Precautions
To remove the back cover, always use the ■ Battery Pack
LOCK Rotating Tool (sample) to unlock the
cover before removing it.
▶P.‌56 "Attaching the Battery Pack" DANGER
To use the product in car, check with Do not allow metal fragments (necklace,
automobile manufacturer or dealer to hairpin) or conductive materials to come into
determine how vehicle devices are affected by contact with the battery pack. Do not bring
radio waves before using. or store the battery pack either with these
In rare cases, using the phone in some vehicle materials.
models can cause the vehicles electronic Doing so may cause fire, burns, or injuries.
equipment to malfunction. In that case, stop
Do not forcibly install the battery pack when
using the product immediately.
attaching the battery pack. Do not forcibly
If you develop skin problems, stop using the remove the battery pack when removing the
product immediately, and see a doctor. battery pack.
Itching, rashes, eczema, etc. sometimes Doing so may cause fire, burns, or injuries.
occurs depending on your physical constitution For details on installing/removing the battery
and condition. pack, refer to the following.
For material of each part ▶P.‌23 "Material List" ▶P.‌56 "Attaching the Battery Pack"
▶P.‌59 "Removing the Battery Pack"
17
Do not throw the battery pack into fire or Do not touch the battery pack with wet hands.
apply heat. Doing so may cause burns or electric shock.
Stop using the product immediately and move
Do not apply excessive force such as sticking
the battery pack away from fire if you notice
a sharp-edged tool (nail, etc.) into the product,
unusual odor or leakage of fluids inside the
hitting it with a hard tool (hammer, etc.), or
battery pack.
stepping on it.
The battery fluid is flammable and could ignite,
causing a fire, explosion, etc.
Check the orientation of the battery pack
Prevent a pet from biting the battery pack.
when installing the battery pack into the
product.
due to battery pack ignition, rupture, overheat,
Safety Precautions

or leak.
due to battery pack ignition, rupture, overheat,
or leak.
For details on installing the battery pack, refer
to the following. CAUTION
▶P.‌56 "Attaching the Battery Pack"
If fluid, etc. leaks out from the battery pack,
If the substance inside the battery pack do not let the fluid contact with the skin on
comes into contact with your eyes or mouth, your face or hands or clothes.
immediately rinse the area with clean water, Doing so may cause eye or skin problems.
and then see a doctor right away. If the internal matter comes into contact with
Not doing so may cause loss of sight or poor your eyes, mouth, skin or clothes, immediately
physical condition due to the influence of the rinse the contacted area with clean water.
substance, etc. inside the battery pack. If the fluid enters your eyes, mouth etc.,
immediately see a doctor after rinsing.
WARNING
Do not use the product if there are odors,
noise, smoke, overheating, discoloring,
deformation, or other abnormalities.
18
Do not discard the old battery pack together Do not short the charging terminal while it is
with regular trash. connected to an outlet. Do not allow any part
Doing so may cause fire, burns, or injuries. May of your body such as your hands or fingers to
damage the environment. After insulating the come into contact with the charging terminal.
battery pack no longer needed with tapes, etc. Doing so may cause fire, burns, or electric
on the connection terminal of the battery pack, shock.
and bring the battery pack to a sales outlet
such as au Shop. Alternatively, if your local Do not place heavy objects on the cord of the
municipality has a battery recycling program, specified charger (sold separately), or do not
dispose of it as provided for. pull the cord with excessive force.
Do not use or charge the product with the shock.
battery pack is wet.
Safety Precautions
Doing so may cause fire, burns, or injuries. When you plug/unplug the specified charger
(sold separately) into/from the outlet, do not
contact metal straps or other metal objects
■ Charger with the jack.
WARNING shock.
Do not connect a transformer for overseas
Do not use if the cord of the specified charger travel (travel converter) to the specified
(sold separately) is damaged. charger (sold separately).
Doing so may cause fire, burns, or electric Doing so may cause ignition, overheating, or
shock. electric shock.
Do not use the specified charger (sold Do not apply excessive force on the
separately) in a humid place such as a connection part with the specified charger
bathroom. (sold separately) connected to the product.
Doing so may cause fire, burns, or electric Doing so may cause fire, burns, injuries, or
shock. electric shock.
Do not touch the specified charger (sold
separately) if you hear thunder.
Doing so may cause electric shock.
19
Do not charge anything that has gotten wet When you disconnect the power plug
with water or other liquid (beverage, sweat, from an outlet, do not pull the cord of the
seawater, pet urine, etc.) with a wireless specified charger (sold separately) with
charger product (sold separately). excessive force. Instead, grasp the adapter to
Doing so may cause fire, burns, injuries, or disconnect.
electric shock. Pulling the cord of the specified charger (sold
separately) may damage the cord and cause
Do not touch the cord, charging terminal or
fires, burns, electric shock, etc.
power plug of the specified charger (sold
separately) with wet hands. If wearing an implanted cardiac pacemaker,
Doing so may cause fire, burns, or electric implanted defibrillator, or other medical
shock. electric device, consult carefully with a doctor
before using a wireless charger product (sold
Safety Precautions
Use the product at the specified power supply

separately).
voltage.
When charging the product overseas, use the
specified charger (sold separately) for global
use. When plugging/unplugging the specified
Incorrect power supply voltage may cause fire, charger (sold separately) into/from the
burns, or electric shock. product, do not pull the cord with excessive
AC adapter: 100 VAC (Connect to an AC force. Instead, plug/unplug it straightly toward
outlet for internal household use) the jack to connect.
AC adapter for global use: 100 VAC to 240 Not doing so may cause fire, burns, injuries, or
VAC (Connect to an AC outlet for internal electric shock.
household use)
Stop using the charger immediately if you
Wipe off dust on the power plug. notice deformation of the charging terminal.
Not doing so may cause fire, burns, or electric Also, stop using the charger after recovering
shock. the original form of the terminal.
Short-circuiting of the charging terminal may
Fully plug the specified charger (sold
cause fire, burns, injuries, or electric shock.
separately) into the outlet.
Not doing so may cause fire, burns, or electric
shock.
20
When the charger is not to be used for a long ■ au IC Card
time, disconnect the power plug from the
outlet.
Leaving it plugged in may cause fires, burns, or CAUTION
electric shock, etc.
Be careful of the cut surface when handling
Immediately remove the power plug from the the au IC card as it may damage a part of
outlet if water or other fluids (drinking water, your body such as fingers, etc.
perspiration, seawater, urine of pet animals, The cut surface may cause injuries with
etc.) get on the adapter. adhered metal pieces.
Short-circuiting due to the fluid may cause fire,
burns, or electric shock.
Safety Precautions
Always remove the power plug from an outlet
when cleaning the equipment.
Not doing so may cause fire, burns, or electric
shock.
CAUTION
Do not keep touching continuously the
specified charger (sold separately) when it is
connected to an outlet.
Doing so may cause burns.
21
■ LOCK Rotating Tool (Sample), ■ Use near Medical Instruments and
Hexagon Wrench (Sample) Inside Medical Facilities
WARNING WARNING
The hexagon wrench (sample) has a sharp Wearers of medical equipment such as
point. Do not use pointed at yourself or others. implanted pacemakers or defibrillators must
Doing so may allow it to strike yourself or carry and use the product at least 15 cm
others, causing injuries or blindness. away from the implanted device.
CAUTION
Safety Precautions
When using electronic medical devices

If using the LOCK Rotating Tool (sample) or as home medical treatment other than an
hexagon wrench (sample) causes any skin implanted pacemaker and an implanted
abnormality, immediately discontinue use and cardioverter-defibrillator outside medical
see a doctor. Itching, rashes, eczema, etc. facilities, check individually with the
sometimes occurs depending on your physical manufacturer of the electronic medical
constitution and condition. equipment regarding the influence of radio
For material of each part ▶P.‌23 "Material List" waves.
Store out of reach of infants and young electronic medical equipment.
children.
They may accidentally swallow it, causing Make sure that the product will not emit any
choking or injury. signals (turn off power, put it in Airplane
mode, etc.) if within 15 cm of those around
you, such as where crowded and you cannot
move freely.
There may be people with an implanted
pacemaker or an implanted cardioverter-
defibrillator nearby. Radio waves may affect the
performance of electronic medical equipment.
22
When using the product in medical facilities, Part Material Surface
be sure to observe the regulations of the Treatment
facility. Mobile light lens PMMA -
Radio waves may affect the performance of resin
electronic medical equipment. Camera lens periphery, Aluminum Anodizing
camera button
Case screws SWCH Baking finish
Material List Lock knob SUS Ni-plated
coating
■ TORQUE G04 main unit
Part Material Surface ■ Battery pack
Treatment Part Material Surface
Safety Precautions
Exterior case (display PA resin UV-cured Treatment
side) acrylic Exterior PC resin -
coating Seal PET -
Exterior case (front PA resin/ UV-cured Terminal Copper Gold-plated
cover) PET acrylic (Ni-plated
coating/hard undercoating)
coating
■ LOCK Rotating Tool (sample)
Exterior case (back, side), PC resin UV-cured
volume up/down button, acrylic Part Material Surface
Direct button, USB cover coating Treatment
Power button Epoxy resin Acrylic Exterior PA resin -
thermal cure ■ Hexagon wrench (sample)
coating
Part Material Surface
Exterior case (top/bottom TPU -
Treatment
bump protectors)
Exterior Palladium Electroless
Display, wide-angle Chemically Antifouling
steel nickel
camera lens, out-camera strengthened
plating
lens glass
23
■ Front screen ● To ensure the waterproof property (equivalent to
Part Material Surface IPX5 and IPX8) or the dustproof property (IP6X) of
Treatment the product, use the product with the back cover or
Exterior Acrylic resin - USB cover attached.
(silicon resin Note that the waterproof property is not guaranteed in
(adherend)) every usage condition. Do not allow water to get inside
the product, or splash water on a specified charger (sold
separately) or optional accessories. Do not attach/
Handling Precautions remove the back cover, or open/close the USB cover in
the rain or with any water on the surface of the product.
These precautions are provided to prevent product Doing so may cause water intrusion resulting in internal
faults and to ensure that performance can be fully corrosion.
Safety Precautions
Malfunctions determined to be caused by such

demonstrated. Thoroughly read these precautions
water intrusion are not covered by the warranty.
to ensure correct use.
■ Precautions Common to the Main Unit, Battery ● Do not use the product in extremely hot, cold or
humid places.
Pack, Charger, au IC Card, LOCK Rotating Tool
(Use within an ambient temperature range of 5℃ to
(Sample), Hexagon Wrench (Sample), Peripheral 35℃ and humidity range of 35% to 90%. Temporary
Devices use at -21℃ to 50℃ is allowed.)
- Main unit
● Do not apply excessive force to the product during
- Battery pack, au IC card (attached to the main
use. Be sure not to put the product into a tightly
unit)
packed bag or place a heavy object on the product
in a bag. Sitting on the product in your pocket ● Do not use the product in extremely hot, cold or
might damage the display or internal circuit board humid places.
resulting in a damage or malfunction. (Use within an ambient temperature range of 5℃ to
Keeping an external connection device connected 35℃ and humidity range of 35% to 85%.)
to the external connection terminal might damage - Charger
the connector resulting in a malfunction. Such - Related Accessories
damage and malfunction are not covered by the
warranty, even if there is no external damage. ● Do not use in places subject to lots of dust or
vibration. Doing so may cause malfunction.
24
● Clean the external connection terminal, wireless ● Be sure to use only the specified peripheral devices.
charging antenna connection, and charging Use of other peripheral devices might cause
connection area with dry cotton swabs, etc. malfunction.
every now and then. Soiling may result in a poor
● Do not put the product in a cooking apparatus such
connection. Do not exert a strong force to clean
as microwave oven or a pressure vessel. Doing so
the respective connection terminals to prevent
may cause malfunction.
deformation.
● The customer is not allowed to disassemble,
● Clean the product with a soft dry cloth (such as the
modify or repair the product. Doing so may cause
type used for eyeglasses). Forceful rubbing with a
malfunction. Modification of the product is in
dry cloth may scratch the display. The display may
violation of the Radio Law and Telecommunications
be stained if splash or smear is left attached to the
Business Law.
surface. Wiping the product using alcohol, thinner,
Safety Precautions
benzene, detergent, etc. might erase the printing on ● To prevent short-circuiting of the connection
the outer cover or cause malfunction. terminal, do not allow your fingers or any other part
of your body or conductive materials (metal, pencil
● Use as far away as possible from fixed-line phones,
lead, etc.) to come in contact with or enter these
TVs and radios. Use nearby might affect them.
areas. Doing so may cause malfunction.
● The product may become warm while charging,
● In the event that the product gets wet while
depending on the situation, but this is not abnormal.
charging, immediately disconnect the power plug of
● Remove the battery pack after turning off the the specified charger (sold separately).
product. Data stored in the product may sometimes
● Do not use the product while driving a car or riding
be altered or lost by removing the battery pack
a motorbike or bicycle or while walking. Use of a
before turning off the product.
mobile device while driving a car or motorbike is
● Do not place near corrosive chemicals or in places prohibited by law. Use of a cell phone while riding a
where corrosive gas is generated. Doing so may bicycle may be punishable by some regulations.
cause malfunction.
● Using or charging the product in a bag or while it is
● Do not use outside when you can hear thunder. covered with bedding might cause malfunction.
Doing so might risk lightning strikes and electric
shock.
25
● When using a specified charger (sold separately) ■ Main Unit
or external device, insert/remove the connector ● Do not forcefully press, tap or intentionally subject
straight to/from the terminal. Improper connection the display to strong impact. Doing so may cause
may cause a fault. scratching or damage.
● Do not expose the camera lens to direct sunlight ● The display surface of this product is protected
for an extended period. Doing so may cause by the hybrid shield. Do not use the hybrid shield
malfunction. without the sheet on its surface of the front screen
● Do not store the product in places subject to direct because it may affect the functionality of the
sunlight (e.g. in a car), places that get hot, places product.
that get extremely cold, and in humid or dusty ● Do not forcefully press your fingernails, sharp
places. Doing so may cause malfunction. objects, or hard objects against buttons or display
Safety Precautions
● Do not leave the product on unstable or sloping surface. Doing so may cause scratching or damage.
surfaces. Be careful especially when the product is ● The touch panel is designed to be lightly touched
charging or set to vibrate. The product may fall and by fingers. Avoid pressing forcefully or using sharp
cause malfunction. objects (fingernail, ballpoint pen, pin, etc.).
● For charging the product, do not exceed the rating The touch panel might not respond to the following
of an outlet or wiring device by overloading an types of operation. These may also result in
electrical circuit, etc. malfunction.
・with fingernails
・with another object placed on the operation area
・with the display covered with a sticker or sheet
(commercially available protective film or privacy
protector)
26
● Never use the modified product. Use of a ● When you put the product in your pocket or bag,
modified device violates the Radio Law and take care so that the display does not come in
Telecommunications Business Law. contact with metal objects or other hard objects.
The product has acquired such certification Not doing so may cause scratching or damage.
as conformity with technical regulations for a Be aware that any metal or other hard cell phone
specified radio station based on the Radio Law and strap that comes into contact with the display may
conformity with technical regulations for a terminal scratch or damage them.
device based on the Telecommunications Business
● When suddenly brought into a warm place from a
Law, and the "Technical Conformity Mark " can be
cold place, or when in a humid location, or when
confirmed internally in the product.
used where temperature suddenly changes (e.g.
From the home screen → [ ] → [Settings] →
near the air discharge port of an air conditioner),
[System] → [Compliance information]
water drops (i.e. condensation) sometimes are
Safety Precautions
If modifications are made to the internal
formed inside the product. Note that when used
components, the certifications of conformity with
under conditions such as this, humidity might cause
technical regulations will become invalid. Never use
corrosion or a fault.
the product without these certifications valid. Doing
so violates the Radio Law and Telecommunications ● Camera lens or inside of the display may mist over
Business Law. (dew formation) because of usage environment
such as temperature or humidity. This is not
● Take care not to place magnetized items such as
malfunctioning or abnormal.
magnetic cards, speakers and TV sets near the
product, as it might cause malfunction. ● Environment for easily generating dew formation on
Putting strong magnetism close to the product the camera lens or inside of the display
might cause false operation. In the following cases, such as large temperature
change or high humidity, camera lens or inside
● Do not bring magnetized cards such as cash
of the display mist over because of usage
cards, credit cards and prepaid cards closer to the
environment.
product. Doing so may result in loss of recorded
・ Bring the product from a high temperature land
information.
into a low temperature water.
・ Bring the product from a cold place into a warm
place such as an indoor.
・ Open/Close the USB cover of the product in a
high humidity environment.
27
● How to reduce condensation ● Do not use the product with the back cover or
Do not use the product in places that get hot front cover removed. Do not leave or store the
and humid, and sandy or dusty places. Leave the product in this condition. Doing so may allow dust
product with USB cover opened for a while until or other foreign matter to enter product and cause
the condensation is cleared when the ambient malfunction.
temperature is held constant.
● Keep the USB cover, etc. closed when using the
● While writing/reading data to/from a microSD product. Using the product with the covers opened
memory card, do not subject the product to can allow dust, water, etc. to enter and cause
vibration or impact, removing the battery pack, or malfunction.
turn off the power. Doing so may cause data loss or
● Do not allow liquids, metal objects, or other foreign
malfunction.
objects to get inside of the au IC card or microSD
Safety Precautions
● Do not remove the wireless charging antenna on memory card slot. Doing so may cause malfunction.
the back side of the back cover. Removing the
● Product speaker uses magnetic parts; be careful not
wireless charging antenna will prevent wireless
to allow anything metal (cutter blades, staples, etc.)
charging.
adhere to product when the front cover is removed.
● Do not cover the light sensor with your finger or Attaching the front cover with anything adhering
put a sticker on it. May hinder the sensor from can cause malfunction.
detecting the ambient light level and functioning
● Do not give strong impact on the product such as
correctly.
dropping, throwing, stomping. Doing so may cause
● Do not put a sticker, etc. on the proximity sensor. malfunction.
May cause the sensor to malfunction and make the
● Do not place the product directly on sand at a
display always turned off while receiving a call or
beach, etc. If sand or other small particles get
during a call.
inside the microphone or speaker, etc., it may cause
● Any soiling on the proximity sensor may cause the volume to drop or malfunction.
misoperation. Wipe the sensor with a soft, dry cloth.
28
■ Touch Panel ● Priority is given to operation with a bare hand if
● Any soiling on the display surface may cause false operating with a gloved hand and bare hand at the
operation. Wipe the display with a soft, dry cloth. same time.
● Putting stickers or sheets (e.g. commercially ■ Battery Pack

available protective films, peep prevention sheets)
on the display might cause incorrect operation of (The battery pack of the product is
the touch panel. a lithium-ion battery.)
The battery pack is not fully charged
● When carrying the product in your pocket or bag, at the time of purchase. Charge the
take care not to put the touch panel close to battery before using the product.
metals or other conductive materials, as it might Also charge the battery after long
cause false operation of the touch panel. periods of disuse before using the
Safety Precautions
product.
● Touching operation with gloved hands is available,
but touching the panel may not work properly
depending on the thickness and material of gloves. ● Use in very hot or cold environments, for example,
・ Wipe off any water droplets on gloves if you when left in an automobile with the windows closed
cannot operate the product with water drops in summer, will cause the battery capacity to drop
attached to gloves. and shorten the available battery usage time. This
・ If you cannot operate with gloved hands after will also shorten the battery pack's service life. Try
operating with bare hands, try entering the sleep to use the battery as much as possible at room
mode and canceling the sleep mode. If "Glove temperature.
touch mode" is set to "Always ON", operation with ● When the battery pack is not to be used for a long
gloved hands is available even after operating with time, remove the battery pack from the main unit,
bare hands. To set "Glove touch mode" to "Always and store it away from hot and humid places.
ON", from the home screen → [ ] → [Settings] →
[Display] → [Glove touch mode] → [Always ON] → ● The battery pack is a consumable item. If the
[OK] performance of a battery pack does not recover
・ If you cannot operate with gloves which does not (e.g. the usable time after each charge has become
fit your finger, try pressing the display with the extremely short), the battery is at the end of service
flat part of your finger. life, so stop use and buy a new one of the specified
type. Note that the length of service life varies
depending on the usage condition, etc.
29
● Battery packs sometimes swell up as they approach ■ Wireless Charging
the end of their service life depending on the usage ● Do not adhere anything metal (stickers, etc.
condition. This is due to the properties of lithium-ion containing metal) on Wireless Charger Pad (sold
batteries, and is not a problem in terms of safety. separately) or the back of the product. Doing so
● Do not use a battery pack that has been damaged may cause malfunction.
or that is leaking battery fluid. Doing so may cause ● The indicator LEDs on the Wireless Charging
malfunction. Pad (sold separately) remains on after charging
● Do not wet the battery pack with water, etc. A wet completes, but this is not abnormal.
battery pack may cause malfunction. If you drop the ● Charging may stop just before phone is completely
product into water by mistake, immediately turn off charged.
the power, remove the battery pack, and contact
Safety Precautions
an au shop or Repair and Delivery Support Center. ● If charging stops just before phone is completely
Never charge a wet battery pack. charged, charging may not immediately resume.
■ Charger ● Some Qi-specification products may experience

repeated starting/stopping of charging. Charge with
● Do not wrap power cords of the specified charger a specified au product.
(sold separately) around the charger. Do not forcibly
bend the specified charger's (sold separately) plug ● Above a certain temperature, the charging function
or the connection between the connector and may stop or charging may take a long time, but this
power cord. Do not place heavy objects on the is not abnormal. Wait for the temperature to cool.
cord of the specified charger (sold separately) or ● Charging is controlled at a reduced rate during
USB connection cable, or do not pull the cord with wireless charging to prolong the life of the battery
excessive force. Doing so may cause malfunction. pack.
● When unplugging the power plug of the specified ● Place the Wireless Charging Pad (sold separately)
charger (sold separately) from the power outlet, on a flat, stable surface before charging.
hold and pull the power plug. If you pull the cable, it
might be damaged. ● Turn the phone's vibration function off before
wireless charging. Vibrating of the phone may cause
it to move, preventing charging from completing or
causing it to fall.
30
● Before charging, remove any case, cover, stickers ● Reception (quality of data communication, etc.) may
or sheets (commercially available protective film or be affected while charging on Wireless Charging
privacy protector) attached to the product. Pad (sold separately).
● Make sure that the Wireless Charging Pad (sold ● Do not move the Wireless Charging Pad (sold
separately) and the main unit are not wet. separately) or the main unit while charging.
● Do not wirelessly charge while a separately-sold AC ● Battery may deplete if the main unit is left unused
adapter or USB Type-C cable is connected to the for a long period even after completing charging.
main unit.
● Do not let a credit card, contactless IC card, etc.
● Keep any other wireless chargeable device other between the product and the Wireless Charging Pad
than the product you are charging away from the (sold separately) when charging wirelessly. Doing
product. The au product you are charging may not so may prevent charging, or heat during charging
Safety Precautions
be detected and prevent charging. resulting in the product or card malfunctioning or
being damaged.
● If a TV, radio, etc. experience noise, charge as far
away from the TV, radio, etc. as possible. ■ au IC Card
● Depending on the Qi-specification product, calls ● Do not forcibly remove or insert the au IC card. Be
may not be received during charging. Charge with a careful not to exert excessive force when inserting
specified au product. the card into your au cell phone.
● Some Qi-specification products may experience ● You are responsible for any damage caused by inserting
interference with the Osaifu-Keitai® function, your au IC card into some other IC card reader/writer,
preventing charging from starting. Charge with a etc.
specified au product.
● Do not put stickers, etc. on the au IC card.
● Activating of apps, etc. during wireless charging
may prevent charging from completing. ● Do not insert your au IC card with a conversion
adapter attached. Doing so may cause malfunction.
● The main unit may become warm while on Wireless
Charging Pad (sold separately), but this is not ● Do not damage the card (use in a hot place, throw
abnormal. into fire, contact the metal part with foreign object,
give an impact, bend, apply a load, moisten, etc.).
Doing so may cause data loss or malfunction.
31
■ LOCK Rotating Tool (Sample), Hexagon Wrench ■ Backup Content On the Product
(Sample) ● Please back up important content registered to
● Do not apply excessive force to the LOCK Rotating the product or downloaded to the product from an
Tool (sample) or hexagon wrench (sample). Doing so outside source. Content recorded to memory on
may cause malfunction or damage. the product sometimes disappears or is altered by
unexpected factors, such as static electricity or a
● The LOCK Rotating Tool (sample) and hexagon fault, repair, mishandling, etc.
wrench (sample) are not covered by the free-of-
charge repair warranty. ■ FCC Certification Information
■ Camera ● This product is certified by the Federal

Communications Commission (FCC).
● When photographing important occasions, take a The product's FCC ID is JOYKB46.
Safety Precautions
trial shot and check the shot image to make sure it You can view this certification in the following way.
is correctly shot. How to confirm:
● Do not shoot in areas where shooting is prohibited. From the home screen → [ ] → [Settings] →
[System] → [Compliance information]
■ Copyrights and Rights of Portrait
● You are not allowed to copy, distribute, publish,
modify or edit the data you shot, recorded or
downloaded using the product without consent of
the copyright holder, except for personal use, under
the copyright law.
In addition, do not use or modify portraits or names
of other individuals without their consent, as it may
infringe on rights of portrait.
Note that shooting and recording might be
restricted at some live performances, shows and
exhibitions even for personal use.
● Be careful about the copyright and portrait right
when posting images you shot, etc. on Internet/
website.
32
*3 IP6X-equivalent indicates ability to resist dust intrusion even
Notes on Water, Dust, Seawater, when placed in a test device containing test dust particles
and Shock Resistance

(diameter 75 μm or less) for 8 hours.
Drop Tested by dropping from about 2.0 m in

This product is protection-rated (JIS C 0920) at 26 directions onto metal and concrete
IPX5/8-*1 water resistance and seawater capability*2 Tested by dropping from about 1.0 m
as well as IP6X-equivalent*3 dust resistance when the 500 times consecutively
back cover and USB cover are completely attached (by Tested by dropping a steel ball of
Company test methods). approximately 100 g on the display
The product also meets 27 ruggedization test surface from the height of 1 m
requirements, based on 22 categories of the US Shock Tested by attaching device to test
apparatus and subjecting to shock of
Safety Precautions
Department of Defense's MIL-STD-810G standards
and including 5 categories from proprietary tests 40 G from 6 directions 3 times
(by Company test methods). Product capabilities Immersion Tested by immersing in about 2.0 m
are confirmed in a test environment, and does of water for 60 minutes
not guarantee capabilities under all conditions of Blowing Tested by subjecting to rainfall of
actual use. No guarantees are made with regard to Rain 1.7 mm/min from 6 directions for 30
minutes each direction
non-breakage or non-fault.
*1 IPX5 equivalent means that the product will maintain its
Tested by subjecting to rainfall for 30
operability as a phone even if it is sprayed with water from a 6.3 minutes with wind of 18 m/sec.
mm diameter nozzle at a distance of about 3 meters for more Rain Drip Water resistance tested by dripping
than 3 minutes at a rate of about 12.5 liters per minute from
any direction. IPX8 equivalent indicates no water seepage and from 1 m (15 minutes)
phone capability is maintained even when gently submersed Sand and Dust resistance tested by subjecting
and left at the bottom of a tank for about 30 minutes filled Dust to dust continuously for 6 hours (wind
with still, normal-temperature tap water at a depth of 1.5 m.
*2 Indicates no water seepage and phone capability is maintained 8.9 m/sec, concentration
even when submersed in normal-temperature, 20-kPa 10.6 g/m3)
(maximum depth of 2.0 m) seawater* for about 60 minutes.
Salt Fog Resistance to salt water tested by
* Seawater: Evaluation made with Company original standards
using artificial seawater simulate the seawater composition subjecting continuously for 24 hours
of the Japanese coast. Regarding use at pools, product has to 5% salt fog and then drying for 24
been assessed according to Japanese domestic disinfection hours
standards. 33
Humidity Tested by subjecting continuously for Low Operation environment: Tested in
10 days (95% RH) Temperature an operation environment of -21ºC
Solar Tested by subjecting continuously for (Operation) continuously for 3 hours
Radiation 20 hours to 1,120 W/m2 followed by Low Storage environment: Tested in
shielding from radiation for 4 hours, Pressure a storage environment of -30ºC
repeated for 10 days (Storage) continuously for 4 hours
Vibration Tested by subjecting to vibration for Low Tested continuously for 2 hours (57.2
3 hours (in 3 directions at 1 hour Pressure kPa/ equivalent to altitude of about
each/20 to 2,000 Hz) (Operation) 4,572 m)
Icing/ Tested by exposing to -10ºC chilled Low
Freezing water until coated with ice to 6 mm Pressure
Safety Precautions
Rain (Storage)
Temperature Tested by subjecting to sudden Freeze- Tested by first subjecting to -10ºC
Shock temperature change from -21 to 50ºC Thaw environment with condensation and
continuously for 3 hours mist for 1 hour, and then checking
High Operation environment: Tested in operation in a 25ºC, 95% RH
Temperature an operation environment of 60ºC environment
(Operation) continuously for 3 hours, with 3 cycles Withstand Tested by subjecting to even surface
High of the temperature change ranged 32 load load of 100 kgf
Temperature to 49℃ Seawater Tested by immersing in normal-
(Storage) Storage environment: Tested in resistance temperature, 20-kPa seawater
a storage environment of 70ºC (maximum depth of 2.0 m) for about
continuously for 4 hours, with a 60 minutes
temperature change ranged 30 to
60ºC
34
Before using the product, thoroughly read ◦ Do not let the product submerged into or get wet
"Important Items to Remember before Use" to with the liquids (hot water of hot spring, water
ensure correct use. Failure to follow the contents containing soap, detergent, bath powder, alcohol,
described in these sections may cause the soft drink, seasoning, etc.) other than tap water.
intrusion of water, sand or other foreign material, Do not use it in a place where it gets wet with
resulting in overheating, ignition, electric shock, pet urine either.
injury or a fault. If the product gets splashed, immediately rinse it
Since operation of the product on each usage off with tap water.
scene was confirmed based on the above ◦ Do not place the product directly on sand at a
assumption, proper operation of the product in beach, etc. If sand or other small particles get
every possible condition during actual use is not inside the mouthpiece (microphone), etc., it may
Safety Precautions
guaranteed Malfunctions determined to be caused cause overheating or a fault.
by mishandling by the customer are not covered by ◦ Do not use or leave the product in a humid place
the warranty. such as a bathroom or kitchen for an extended
period of time.
Handling Precautions The product is tested to ensure its proper
operability when the product is exposed to hot
◦ Close firmly the USB cover of the product, and water of the temperature as hot as bath shower
make sure the back cover is completely attached. water (43ºC or less).
Water resistance is effective when completely ◦ Moisture may still remain after draining. While
sealed. this will not affect use, you should not leave the
◦ Never open/close the back cover or USB cover product next to items you do not want to get
when the product or your hands are wet. wet. The product may wet clothing, inside of
carry bag, etc.
◦ Drain any water in the mouthpiece (microphone)
that may be affecting audibility.
35
◦ The product is not designed to resist water ◦ USB cover
pressure. Avoid exposing to high water pressure • Close firmly the USB cover of the product, and
or submersing in water for a long period. make sure the back cover is completely attached.
◦ Do not wash the product in a washing machine Any minute particles becoming lodged between
or ultrasonic bath. contact surfaces (a single hair, etc.), no matter
◦ Do not immerse the product into a bathtub. The how small, can cause seepage.
product is not designed to be heat resistant. • Do not wear gloves while opening/closing the
◦ The rapid changes of temperature may cause USB cover or attaching/removing the back cover.
condensation, resulting in malfunction. Wait until Any minute particles becoming lodged between
the product reaches room temperature before contact surfaces (a single hair, etc.), no matter
you bring the product from a cold place into a how small, can cause seepage. Before closing
Safety Precautions
warm bathroom. the cover, wipe any water, soiling, etc. with a dry,
◦ The product does not float on water. clean cloth, no matter how small.
• Any deterioration or damage with the USB cover
will affect water resistance.
Back cover
USB cover
36
Closing the USB cover Attaching the back cover (▶P.‌56)
After stowing
the hinge of the 1 ① 2
cover ①, press
on the whole ②
cover with the

pad of your 3
finger. Press ① ②
along the cover
in directions 1 Attach the back cover
Insert the back cover diagonally from the two
Safety Precautions
shown ② to
close the cover claws on the edge of the back cover (①), and
firmly ensuring then push the bottom end of the back cover
there are no (②) to fit it.
gaps.
2 Press the back cover where shown
by the arrows making sure the
cover is pressed down completely
around
3 Rotate the lock
knob clockwise to
lock the back cover
Use the accompanied
LOCK Rotating Tool
(Sample).
37
◦ If any liquid other than water gets on the • Be careful not to pinch the rubber seal when
product closing the back cover and USB cover. Trying to
• If anything other than water (washing detergent, close the cover with a seal pinched can scratch
alcohol, etc.) gets on the product, immediately the seal and affect water resistance. Any minute
rinse with water. particles becoming lodged between contact
• You can wash the product under a mild flow surfaces (a single hair, etc.), no matter how small,
(up to 6 liters per minute) of tap water at room can cause seepage.
temperature (5℃ to 35℃) at a distance of about • Any liquid other than water (alcohol, etc.) on the
10 cm from the faucet or showerhead. product can affect product durability.
• If soiled, wash by hand without using a brush, • Do not insert pointed objects in the USB cover
etc., holding the product so that the back cover or back cover. Doing so may damage/deform the
Safety Precautions
and USB cover do not open. product or scratch the rubber seal, allowing water
◦ After the product gets wet seepage.
• After becoming wet, drain water, and then without • Parts used for maintaining water resistance
removing the back cover, wipe both the product should be replaced every 2 years regardless of
and back cover with a dry, clean cloth. their appearance. Contact your nearest au shop
• In cold regions, any water on the product may for replacement.
freeze. Using the product with frozen water may ◦ Heat resistance
cause malfunction. Do not leave water drop on • Do not submerge the product in hot water or get
the product. it wet with hot water. Do not use the product in
◦ Rubber seal saunas or expose it to hot air from hair dryer, etc.
• The rubber seal around the back cover and The product is not designed to be heat resistant.
USB cover is important in maintaining water ◦ Shock
resistance. Do not scratch or remove it. • The product shock resistance assumes usage
in daily situations; subjecting the product to
excessive shock such as by throwing or causing/
letting the product fall forcefully may break the
product.
38
◦ In seawater/Underwater • Wash the product referring to "Cleaning" (▶P.‌40).
• Check the following before using in seawater. * Always wash product after using or immersing in seawater,
and completely dry before charging.
* Close the USB cover and back cover securely. Water
resistance is effective when completely sealed. • Sunscreen or sun oil splashing on the product
* Any minute particles becoming lodged between contact may discolor the surface of the product or cause
surfaces (a single hair, etc.), no matter how small, can cause
seepage.
a fault. If on product, immediately rinse.
* Make sure the back cover is locked. • Touch panel cannot be operated underwater.
• Check the following during and after use in seawater.
* Never open/close the USB cover or back cover when the
product or your hands are wet. Precautions on Charging
* When opening the battery cover, open gently so as not to
allow water to enter inside. If water contacts the inner surface Accessories and optional accessories are not
Safety Precautions
of the back cover, always wipe away before using the product. water/dust resistant. Note the following before and
• Do not use the product in the water at after charging.
approximately 20-kPa (maximum depth of 2.0 m) • Never charge the battery if the product is wet.
or deeper. Do not use in the water continuously Doing so may cause fire, burns, injuries, or
for more than 60 minutes. electric shock.
• The product sinks; use a strap, etc. and be • Make sure the product is not wet. If charging
careful not to drop in the water. after the product has gotten wet, first drain water
• Close the USB cover and back cover securely well and wipe with a dry, clean cloth, etc., before
before using underwater. opening the USB cover, etc.
• After using in seawater, open the USB cover and • If the USB cover was opened to charge, close
front cover, and wash the product using fresh the cover firmly after charging. To prevent water
water. At this time, never open the back cover. intrusion from the USB cover, it is recommended
• Never open the back cover while it is wet. that a Wireless Charging Pad (sold separately) be
• Do not subject the product to shock in the water. used for charging.
Do not dive in water while holding the product, • Do not touch the specified charger (sold
and do not subject to harsh water pressure of separately) with wet hands. Doing so may cause
rapids, a waterfall, etc. Do not use the product in electric shock.
a way that subjects it directly to high-pressure
water. 39
• Do not expose the specified charger (sold
separately) to water. Do not use it near water,
such as in a bathroom, shower room, kitchen,
or washroom. Doing so may cause fire, burns,
electric shock, or malfunction. Do not bring it into
a bathroom, etc. even when you are not charging
with it. Doing so may cause fire, burns, electric
shock, or malfunction.
Cleaning
Safety Precautions
If using the product where seawater or sand, mud,

dust, and other foreign particles can get on it,
continuing to use it without cleaning may cause a
fault. Be sure to clean as follows.
1 Turn off the power, and with the back

cover attached, rinse the locations
below ( ) with mild flow (6 litters
per minute).
Sand or seawater remaining on rubber seals
may affect water resistance. Keep buttons
pressed while rinsing. 2 Remove the front cover (▶P.‌56),
open the USB cover, and rinse mainly
at the locations below ( ). Rinse the
front cover as well.
40
3 Wash the product by gently swishing
it in a bowl with 5 cm of fresh water
for 2 minutes. Rinse the front cover
as well.
Safety Precautions
4 Wipe away water with a soft cloth,
then lightly tap while holding
terminal covers and wipe away any
water. Lightly tap the speaker and
atmospheric pressure sensor areas
and wipe away any water.
If any water is in the atmospheric pressure
sensor, it may not work properly.
41
How to Drain Water
If you use the product after it gets wet, be sure
to drain water from the speaker, mouthpiece
(microphone), and atmospheric pressure sensor.
Water remaining in those parts might wet your
clothes or bag, or the sound might become hard to
hear.
Follow the steps below to drain water.
1 Wipe water thoroughly on the surface

Safety Precautions
of the product with a clean dry lint-

free cloth.
5 Drain water referring to "How to

Drain Water" (▶P.‌42).
6 Dry adequately, check that no water
is remaining in the connector areas,
close the USB cover, and attach the
front cover (▶P.‌55).
◎ Dry the USB cover and the front cover adequately such
as by leaving them in a well-ventilated, shaded place
before closing the USB cover and attaching the front
42 cover. Completely dry before charging the product.
2 Shake the product. 3 Press the product gently against a
①Hold the product firmly and shake it in the clean dry lint-free cloth, and wipe
direction of arrows until water does not come out. off water remained in the gaps such
* When shaking the product, stay alert to your
surroundings. as in the mouthpiece (microphone),
* Be careful not to have the product pop out, and hold it
firmly to drain water. speaker, atmospheric pressure
Receiver side: sensor, etc.
20 times or more
Safety Precautions
Mouthpiece side:
20 times or more
4 Leave the product for 1 hour or more

at room temperature to dry after
②Wipe drained water. removing drained water thoroughly.
* The mouthpiece (microphone), atmospheric pressure Even after you take these procedures, water may
sensor, speaker, and external connection terminal, and
buttons are particularly hard to drain water from. With remain on the product. Do not place the product
those parts facing down, press them against the cloth near things that you do not want to wet.
to wipe off any water.
Also, take care not to wet your clothes, bag, etc.
③Place the product on a dry towel or cloth,
43
then leave it at room temperature for a while.
• Do not use this product in places where
Notes on Using Bluetooth®/ electromagnetic waves are generated or near
Wireless LAN (Wi-Fi®) Function electric products, AV and OA equipment, or other
magnetized devices.
• The Bluetooth® function of the product confirms
• Subjecting this product to magnetic or electrical
to domestic standards of Japan, FCC standards,
noise might increase noise and prevent it from
and have been certified.
performing communications. (This product is
• In some countries/regions, the use of the
particularly susceptible to noise when used near
Bluetooth® function may be restricted. If you are
a microwave oven.)
using the product overseas, check the relevant
• Using this product near a TV, radio or similar
laws and regulations of the country/region you
appliance might cause reception interference and
Safety Precautions
visit.
disrupt TV images.
• The wireless LAN (Wi-Fi®) function of the product
• Searching might not be successful if there are
confirms to domestic standards of Japan, FCC
multiple wireless LAN (Wi-Fi®) access points near
standards, and have been certified.
the product or the same channel is being used.
• In some countries/regions, the use of the
• Since using the product on airplanes is restricted,
wireless LAN (Wi-Fi®) function may be restricted.
follow the instructions given by the respective
If you are using the product overseas, check the
airlines.
relevant laws and regulations of the country/
• The communication speed and connectable
region you visit.
range vary depending on the distance between
• The 2.4 GHz band used by wireless LAN (Wi-Fi®)
communication devices, obstacles and the
and Bluetooth® devices is operated by various
devices used.
other devices. For this reason, the communication
speed and connectable range may be decreased,
or disconnection may occur, due to interference
from other devices.
44
Cautions on Using 2.4 GHz
Band ◎ The connections between this product and
The frequencies used by the Bluetooth® and/or all other Bluetooth® and wireless LAN (Wi-Fi®)
wireless LAN (Wi-Fi®) functions of the product are devices have not been confirmed. Therefore,
in the 2.4 GHz band. In this frequency band, other connections with all Bluetooth® and wireless LAN
(Wi-Fi®) devices are not guaranteed.
similar wireless stations, in-plant wireless stations
◎ This product supports security features for wireless
for mobile unit identification that require a license communications that are compliant with the Bluetooth®
to use, such as factory production lines, specific and wireless LAN (Wi-Fi®) standard specifications,
small power wireless stations that do not require but the security may not be sufficient depending on
licenses, amateur wireless stations (collectively
Safety Precautions
the usage environment and configuration. Be careful
called "other wireless stations" from here on) are when making data communication using Bluetooth® or
operated in addition to home electrical appliances wireless LAN (Wi-Fi®) function.
such as microwave ovens, devices for industrial, ◎ Wireless LAN (Wi-Fi®) has the advantage that it
can be freely connected anywhere within the radio
scientific and medical devices.
wave range, as it uses radio waves for exchanging
1. Before using the product, make sure that "other information. At the same time, there is a risk that a
wireless stations" are not in operation nearby. malicious third party may obtain unauthorized access
2. In the event that instances of radio wave if security settings have not been configured. You
interference have occurred between the product are recommended to configure security settings
and "other wireless stations", immediately either before use at your decision and responsibility.
relocate the product or stop operation of the ◎ The Company assumes no responsibility for leakage
device (stop the emission of radio waves). of data or information that may occur during
Bluetooth®/wireless LAN (Wi-Fi®) communication.
3. If unsure or require assistance, contact an au
◎ Since Bluetooth® and wireless LAN (Wi-Fi®)
shop or Customer Center. functions use the same frequency band, using the
both functions at the same may cause radio wave
interference resulting in decreased communication
speed or disconnection from the network.
If connection fails, stop using either of the
Bluetooth® and Wireless LAN (Wi-Fi®) functions.
45
Bluetooth® and wireless LAN (Wi-Fi®) functions of Cautions on Using 5 GHz Band
the product use frequencies in the 2.4 GHz band.
Outdoor use of 5.2 GHz/5.3 GHz band (W52/W53)
• Bluetooth® function: 2.4FH1/XX1 2.4FH1/XX1
is prohibited under the Radio Law,
except communications with a base station or a
This product uses the 2.4 GHz band. FH-SS is
land mobile relay station for 5.2 GHz band high
used as the modulation scheme. The interference
output power data communication system.
distance is about 10 m or less.
The used channels of the product are as follows.
The band of mobile unit identification devices
• W52 (5.2GHz band / 36, 40, 44, 48ch)
cannot be avoided.
• W53 (5.3GHz band / 52, 56, 60, 64ch)
• Wireless LAN (Wi-Fi®) Function: • W56 (5.6GHz band / 100,104,108,112,116,
Safety Precautions
2.4DS4/OF4 120, 124,128,132,136,140ch)

This product uses the 2.4 GHz band. DS-SS and
OFDM are used as the modulation schemes. The Security Code/PIN Code
interference distance is about 40 m or less.
This means that all bandwidths are used, and Security Code
that band of mobile unit identification devices
The product has various security codes that you
can be avoided.
can use.
The available security codes are as follows. Do
Available channels vary depending on countries.
not forget the various security codes that are set
For use in an airplane, check with the airline
as they are necessary for various operations and
company in advance.
contracts.
Be sure to change initial codes to your own codes
before using the product.
46
● Security code PIN Code
Example ①To do remote operation of voice mail and
of usage call forwarding services from a fixed-line
■ PIN code
phone
②To use Customer Center and to do To prevent unauthorized use of the au IC card by a
various inquiries, applications, and third party, you can set the product to require PIN
modifications on the au homepage code entry every time the power is turned on. You
Initial A four-digit number chosen by the also need to enter PIN code when setting whether
value customer and noted on the application
PIN code entry is required.
form
If PIN code is incorrectly entered three times
● Security setting for the start screen consecutively, the PIN code will be locked. You can
Safety Precautions
Example To enable/disable the security setting unlock the PIN code using PUK code.
of usage • At the time of purchase, the PIN code is "1234",
Initial Follow initial default settings. and entry is not required. You can change the PIN
value
code to any 4- to 8-digit number and the product
● Password ("NFC/Osaifu-Keitai Lock") to require entry if necessary.
Example To use "NFC/Osaifu-Keitai Lock" • To use the product with a PIN code required, be
of usage sure to change the PIN code to your own number
Initial 1234 you have chosen.
value
■ PUK Code
In case PIN code is locked, you can unlock it by
entering PUK code.
• PUK code is an 8-digit number given at the time
of purchase, which is printed on the back side
of the plastic card on which your au IC card is
attached.
• After entering PUK code, you need to set a new
PIN code.
47
• If PUK code is incorrectly entered ten times
consecutively, contact an au shop, TOYOTA Notes on Data
store dealing in au, or Customer Center. Communication Charges
• PIN code is not reset by initializing the product.
• Since constant Internet connection is possible
<Please copy this section and use> with the product, data communication may be
performed automatically by some applications,
resulting in high data communication charges.
【Password entry ﬁeld】
Therefore, subscription to a data flat-rate service/
Google account ID Security (start screen) Lock: Lock No.
data communication charge discount service is
@gmail.com
recommended.
Safety Precautions
Google account password Security (start screen) Lock: Password

• Connection for browsing homepages, downloading
applications, communication using applications,
au ID Security (start screen) Lock: Pattern
sending/receiving e-mails and configuring
various settings is by the Internet, and data
au ID password
communication charge applies.
* Data communication charge does not apply to wireless LAN
Facebook account ID (Wi-Fi®) connection.
Facebook account password
* Strictly manage your account and password to prevent a third

party from obtaining them.
48
Notes on Applications Setting the App Permissions
• Be sure to check the security of the application, The first time you launch an app/function that
then install it at your own risk. Some applications accesses the functions or information of the
may affect the operation of other applications product, a confirmation screen for requesting
or the whole operation of the product. Some access permission appears.
applications might cause virus infection, If the confirmation screen appears, confirm the
damage various data, and send out your location content and operate.
information, usage history or personal information Example: File Commander is activated for the first
stored in your cell phone via the Internet. time
• The Company assumes no responsibility for any
Safety Precautions
problems that might be caused by applications
1 Apps permission confirmation screen
→ [DENY] / [ALLOW]
you have installed. In such case, you may be
in normal cases to allow the use of the
charged a repair fee even during the warranty
function. Repeat the same operations to allow
period.
the use of multiple functions.
• The Company assumes no responsibility for any
disadvantage brought to you or any third party by
applications you have installed. Setting Permissions for
• Some applications require that a microSD Individual App/Function
memory card be inserted.
• Some applications prevent the screen from ■ Setting permissions for individual app
entering sleep mode while they are active, or
rapidly drain the battery while running in the 1 Home screen → [ ] → [Settings] →
background. [Apps & notifications]
• Changes to method of operation or to screen
display may occur without notice due to version 2 [See all (number of apps) apps]
upgrades of applications installed on the select an app → [Permissions] → set
product. Note that there may be differences with the function
descriptions in this manual. 49
■ Setting permissions for individual function
Cell Phone Etiquette
1 Home screen → [ ] → [Settings] →
[Apps & notifications] ■ Use of Cell Phones is Not Allowed
in the Following Places!
2 [App permissions] → select a
• Do not listen to music, watch videos while driving
function → set the app a car or motorbike, or riding a bicycle. Use of
cell phones while driving a car or motorbike is
prohibited by law. (Use of cell phones while riding
◎ If you do not permit, app/function may not be a bicycle may also be punishable by law.) In
Safety Precautions
activated or use of function may be limited. addition, stay alert to the traffic around you even
◎ For some apps/functions, an explanation screen when walking. Surrounding sounds might not
for the permission appears. The confirmation be heard clearly, and gazing at the screen may
screen may also appear multiple times, or the distract your attention causing a traffic accident.
display may differ. Confirm the displayed content
Be especially careful at railroad crossings, station
and follow the onscreen instructions.
◎ In this manual, description of confirmation
platforms and pedestrian crossings.
screens may be omitted. • Since using the product on airplanes is restricted,
follow the instructions given by the respective
airlines.
50
■ Be Considerate of People Around • When a medical institution has laid down
designated areas where use of the product is
You
prohibited or is not allowed to be brought in, abide
• Do not make calls in theaters, museums, libraries, by the instructions of that medical institution.
and other similar places. Turn power off or turn on
manner mode so as not to disturb others around
you with your ringtones.
• In a city area, use in a place where you do not
bother people walking.
• It is extremely dangerous to walk while looking
at the screen of the cell phone. Do not suddenly
Safety Precautions
stop to talk on/operate the cell phone or do so
while walking.
• Move to a place where you do not disturb others
while you are in shinkansen, a hotel lobby, etc.
• Be careful not to be loud while talking.
• Be careful of sound leakage from earphones in
trains or other places with many people around
you.
• Ask permission if you take photos with your cell
phone camera.
• When using the camera, follow common rules of
etiquette regarding camera use.
• There may be a person with a cardiac pacemaker
nearby at a place filled with people such as in a
crowded train. Turn on "Airplane mode" or turn the
cell phone off in such places.
51
① Strap eyelet
Getting Ready ② rl Volume up/down button
Adjust media sound volume such as music or
videos.
Names and Functions of Parts ③ d Direct button
Press and hold to activate the set function.
④ Incoming (charging) lamp
④ ⑤⑥ ⑦ Lights in red during charging.
Flashes in green for a missed call or new mail.
⑧ ⑤ Proximity sensor/Light sensor
①
If the display becomes covered during a call, the
proximity sensor turns the display off to prevent
erroneous touch panel operation.
②
Light sensor detects the ambient light level to
Getting Ready
⑨ adjust the display brightness.

⑬
⑥ In camera (lens)
③ ⑦ Receiver/speaker
⑭ Hear the other party's voice on call, playback
sound of the auto answering, etc.
①
⑧ ⑧ Front cover
Remove when performing maintenance or
⑩ replacing the front screen.
⑪
"Attaching/Removing the Front Cover" (▶P.‌55)
⑨ Display (touch panel)
52
⑩ Mouthpiece (microphone)/atmospheric ⑬ F Power button / fingerprint sensor
pressure sensor/speaker Use to turn on/off, activate/deactivate the
Relays your voice to the other party. Or used to sleep mode.
record voice sound. Take care not to cover the If a fingerprint is registered, unlock the screen
mouthpiece (microphone) with your fingers, etc. by fingerprint authentication.
during calling or video recording.
⑮
⑯ ㉔
㉕
⑰ ㉖
⑱
㉗
㉘
Getting Ready
⑲
㉙
⑳
㉚
㉛
㉑
Back cover (rear)
㉒
㉓ ⑭ k Camera button
Press and hold to activate the camera. Also
⑪ USB cover
use as shutter for still photos and underwater
The opening in the cover is a necessary part of
camera screen.
its waterproof construction. Do not poke with a
⑮ Built-in sub antenna*1
pointed object or block it.
⑯ Built-in GPS antenna*1
⑫ External connection terminal
⑰ Built-in Bluetooth®/Wi-Fi® antenna*1
Used to connect Type-C Common AC Adapter
02 (sold separately), etc.
53
⑱ NFC (FeliCa compatible) antenna*1 *2 Avoid adhering stickers, etc. on the back cover
Hold over a reader/writer when using Osaifu- where the wireless charging antenna/charging
Keitai®. connection area are located. Doing so may affect
wireless charging.
Send or receive data via IC transmission.
⑲ Wireless charging area*1
For wireless charging, place the "R" letter of
"TORQUE" logo on the q mark on a separately- ◎ Do not put stickers, etc. on the proximity sensor/
sold wireless charging pad. light sensor.
⑳ Back cover*2 ◎ Product is equipped with an atmospheric pressure
sensor. You can display barometric pressure and
Lock knob
elevation when using a barometric display app,
Built-in WiMAX 2+ antenna※1 however, values are not absolute due to a number
Built-in main antenna※1 of variables, and are approximate only.
Out camera (lens) ◎ Do not remove the film sheet from the
mouthpiece (microphone)/atmospheric pressure
Getting Ready
Shooting/simple light
Wide camera (lens) sensor/speaker.
◎ A front screen is adhered to the product to
au Nano IC Card 04 slot
protect the display (touch panel). If the screen
Wireless charging antenna connection terminal becomes damaged or worn, it can be replaced
Battery pack with the front screen (KYV46KGA) (sold
Under the battery back, au Nano IC Card 04 slot separately).
and microSD memory card slot are found.
microSD memory card slot
Battery lock
Wireless charging antenna/charging connection
area
*1 Do not cover antennas with your hand or put
stickers etc. Doing so may affect calling/
communication quality or wireless charging.
54
Incoming Lamp/Charging Lamp Attaching/Removing the
Lighting/blinking of the incoming/charging light Front Cover
notifies you the charging status, missed calls, or
new mail, etc. Remove the front cover when performing
LED Color and Notification maintenance or replacing the front screen. Do not
Functioning remove in any other circumstances.
Lighting-up in red Indicates that the product is in Attaching the Front Cover
charging.
Lighting-up in green Indicates that the charging is 1 Use the hexagon wrench (sample) to
complete.
turn the four screws where circled ○
Blinking in green Indicates missed calls or
notification messages. in the direction of arrows
Avoid tightening more than necessary. Doing
Getting Ready
so may cause damage.
55
Removing the Front Cover Attaching/Removing the
1 Use the hexagon wrench (sample) to Battery Pack
turn the four screws where circled ○
Attach/remove the battery pack after turning off
in the direction of arrows the product.
The non-loss screws are designed to remain • Use the specified battery pack of the product.
installed on the front cover. Remove the front
cover with the screws attached. Attaching the Battery Pack
1 Use the LOCK Rotating Tool (sample)
to turn the lock to "FREE"
LOCK Rotating
Tool (sample)
Getting Ready
Lock knob
56
2 Remove the back cover on the rear
side of the product
Lift the back cover by the center notch of the
cover using fingertips (fingernail, etc.) in the Battery lock
direction of the arrow to remove.
• Remove the cover while releasing the tabs on
the back side of the back cover.
4 Attach the battery pack

Confirm the position of connection, and then
slide the battery pack in and press it firmly into
Getting Ready
Tab place.
Notch • Install the battery pack after confirming
the au IC card or microSD memory card is
3 Slide the battery lock to the (open)
properly inserted.
direction
The battery lock is unlocked. ②
• The battery pack can be attached only when
①
the battery lock is unlocked.
Connection
Battery pack
57
Claws
①
5 Slide the battery lock to the (close)
direction
The battery lock is locked and the battery pack
②
is fixed.
• The battery lock can be slid to the (close)
direction only when the microSD memory
card is inserted to the rear end.
7 Press the back cover where shown

by the arrows making sure the cover
is pressed down completely around
Battery lock
• The back cover can be closed only when the

Getting Ready
battery lock is locked.
6 Attach the back cover

Insert the back cover diagonally from the two
claws on the edge of the back cover (①), and
then push the bottom end of the back cover (②)
to fit it.
58
8 Use the LOCK Rotating Tool (sample) Removing the Battery Pack
to turn the lock to "LOCK"
Avoid tightening more than necessary. Doing ₁ Remove the back cover (▶P.‌56)
so may cause damage.
• The lock knob can be turned to "LOCK" only 2 Slide the battery lock to the (open)
when the battery lock is locked. direction
LOCK Rotating The battery lock is unlocked and the battery
Tool (sample) pack is also released.
Battery lock
Getting Ready
Lock knob
◎ Attaching incorrectly may cause damage to the

battery pack.
59
3 Remove the battery pack au IC Card (SIM Card)
Use one hand to catch the battery pack as
shown, and tap the product while bringing The au IC card contains your au Nano IC Card 04
hands together to remove. phone number and other (Back) (Front)
information.
The product is compatible
with au Nano IC Card 04.
IC (metal) part
◎ Note that mishandling au IC card might cause

malfunction or damage. Remember the following
Getting Ready
points.
• Do not touch the IC (metal) part of the au IC
card.
• Check the correct insert direction.
4 Slide the battery lock to the (close) • Do not forcefully attach/remove the card.
direction, and attach the back cover ◎ If the au IC card is not attached correctly or the
au IC card has any abnormality, an error message
(▶P.‌56) is displayed.
◎ Do not lose the removed au IC card.
◎ Do not insert your au IC card with a conversion
adapter attached. Doing so may cause
◎ Do not use a screwdriver, etc. to remove the malfunction.
battery pack. Doing so may damage the battery
pack.
60
When au IC Card is Not Attaching/Removing au IC Card
Inserted Attach/remove the au IC card after turning off the
When au IC Card is not inserted, the following product.
operations are not available.
• Making*/Receiving a call Attaching au IC Card
• Sending/receiving SMS
• Sending/receiving +Message 1 Turn the power off and remove the
• Initial setting and sending/receiving of au-mail battery pack (▶P.‌59 "Removing the
• PIN code setting
Battery Pack")
• Checking your phone number and e-mail address
of the product
2 Check the correct insert direction,
Besides the items above, functions that require and slowly insert the au IC card
your phone number may also be unavailable.
Getting Ready
* Emergency calls such as 110 (Police), 119 (Fire/Ambulance), straight until it clicks
118 (Maritime rescue) are also unavailable. However, only Note the orientations of the notch and IC (metal)
emergency calls may be available in overseas. (Emergency call
numbers differ depending on the countries/regions.)
surface.
Make sure that the au IC card clicks and is
■ PIN Code Limit Settings locked when inserting it. The au IC card may fly
To protect your personal information, you can limit out if you release your finger before the au IC
unauthorized use of the au IC card by a third party card is locked. Be careful not to let the au IC
by changing PIN code or locking SIM card (▶P.‌47 card come off.
"PIN Code")
61
Notch
IC (metal)
part
3 Install the battery pack and back 3 Slowly pull the au IC card
cover (▶P.‌56) Slowly pull out the card as straight as possible.
• Depending on the card, it is difficult to
Removing au IC Card pull out from the slot due to the failure of
Getting Ready
unlocking. In that case, remove the card by

1 Turn the power off and remove the pulling lightly with your fingers.
battery pack (▶P.‌59 "Removing the
Battery Pack") 4 Install the battery pack and back
cover (▶P.‌56)
2 Push the au IC in the direction of
arrow
Pushing the au IC card until you hear a click, the
au IC card comes out.
• Keep your fingers on while the au IC card
slightly comes out. Be aware that the card
may fly out if you release your finger while
pressing hard.
62
Attaching/Removing
microSD Memory Card ◎ Make sure that the top/bottom and front/rear of
the microSD memory card are facing correctly.
Attaching microSD Memory Trying to force a wrongly oriented card into the
slot could make it impossible to remove the card
Card or result in damage.
1 Turn the power off and remove the

battery pack (▶P.‌59 "Removing the Removing microSD Memory
Battery Pack")
Card
2 Confirm the direction of the microSD 1 Turn the power off and remove the
memory card and slowly insert it into
battery pack (▶P.‌59 "Removing the
Getting Ready
the slot straight
Battery Pack")
microSD
logo
2 Slowly pull the microSD memory card
upward in the direction of arrow
Slowly slide and pull out the card as straight
as possible.
3 Install the battery pack and back

cover (▶P.‌56)
63
Charging
The battery pack is not fully charged at the time
of purchase. Charge the battery sufficiently before
use. When charging is complete, the charging light
that lights up in red turns into green.
◎ The specified charger (sold separately) is not

water proof. Never charge the battery if the
3 Install the battery pack and back product is wet.
◎ The product may become warm while charging,
cover (▶P.‌56)
this is not abnormal.
◎ When temperature of environment or the product
Getting Ready
is extremely high or low, charging may be

◎ Do not touch the terminal part of a microSD stopped. Charge the battery at room temperature
memory card. as much as possible.
◎ Be careful not to pull out the microSD memory ◎ Charging the product while using the camera
card forcefully. Doing so may cause malfunction function, etc., the charging time may take longer
or data erasure. than usual.
◎ After using the product for a long time, the removed ◎ Handle the battery pack after carefully reading
microSD memory card may become warm. This is "Safety Precautions (Observe Strictly)" (▶P.‌10).
not a malfunction. ◎ When you operate the product with the specified
charger (sold separately) connected, the product
may repeat short-time charging/discharging
resulting in short battery life.
64
◎ Make sure that the battery pack is correctly Charging with the Specified
attached and connection is correct if the
charging lamp of the product blinks in red. If AC Adapter
the indicator keeps blinking, stop charging and
How to charge the product using Type-C Common
then contact an au shop or Repair and Delivery
AC Adapter 02 (sold separately) is described
Support Center.
◎ Close the USB cover firmly after charging to here. For details on the specified AC adapter (sold
prevent moisture and dust from entering. Do not separately), see "Related Accessories" (▶P.‌91).
pull or twist forcefully.
◎ Do not wirelessly charge while the specified
1 Insert the power plug of Type-C
charger (sold separately) or USB Type-C cable
Common AC Adapter 02 (sold
(commercially available) is connected to the separately) into an outlet (100 to 240
product. The product will not charge properly, and VAC)
it may also cause malfunctioning.
◎ Keep a metal accessory or conductive materials
Getting Ready
(metal pieces, pencil lead, etc.) from coming in
contact with the connection terminal and prevent
them from getting inside.
◎ A magnetic field created by current during
charging may affect the geomagnetic sensor.
Type-C Common AC Adapter 02

(sold separately)
2 Open the USB cover of the product
65
3 Insert the USB Type-C plug of 4 When charging is complete, pull
Type-C Common AC Adapter 02 (sold out the USB Type-C plug of Type-C
separately) straight into the external Common AC Adapter 02 (sold
connection terminal separately) straight from the external
The USB Type-C plug is reversible and can be connection terminal
inserted to the terminal which side is up.
Make sure that the charging light lights up
5 Close the USB cover
in red. When the product is turned on, " " 6 Unplug the power plug of Type-C
appears on the status bar. Common AC Adapter 02 (sold
When charging is complete, the charging lamp separately) from the outlet
turns into green.
Getting Ready
◎ Note that applying unnecessary force with

an external device connected to the external
connection terminal may cause damage.
2 ◎ When the battery is charged in the case it has
run out, charging light may not light up soon, but
charging is started.
3
Type-C Common AC Adapter 02
(sold separately)
66
Charging with the Wireless 1 Connect the microUSB connector
Charging Pad of an AC adapter (sold separately)
compatible with the Wireless
How to use the Wireless Charging Pad 02 (sold
separately) for charging is explained here.
Charging Pad 02 (sold separately)
For usage precautions and details, also see the to its microUSB jack, and plug
instructions included with the Wireless Charging the compatible AC adapter (sold
Pad 02 (sold separately). separately) into an outlet (100V -
Simply placing the product on top 240V AC)
of an au-specified wireless charger Compatible AC adapter
product (sold separately) displaying Wireless Charging Pad 02 (sold separately)
the mark on the left allows charging
q
without the need to connect a cable.
Getting Ready
Be sure to also read the instructions
for any supported product.
Products with the mark are
compliant with the wireless charging
specifications of the Wireless Power
Consortium (WPC).
Indicator LEDs
* 4 locations microUSB
This product supports "おくだけ充電®
connector
(okudake juden)" place-and-charge microUSB jack
functionality.
"おくだけ充電" and the "おくだけ充電"
logo are registered trademarks of NTT
DOCOMO, INC.
67
2 With the wireless charging area on the Charging light
back of the product downward, place
the product so that the "R" of the
"TORQUE" logo comes in contact with
the mark on the Wireless Charging
Pad 02 (sold separately)
The indicator LEDs flash in blue; after about
12 seconds, check that they remain lit and
that the charging light on the product is lit red
If the indicator LEDs still flash blue after about
12 seconds, the product is not positioned Wireless charging area
where it can charge. Adjust the position of the
Getting Ready
product.
When charging is complete, the charging light
turns into green. 3 After charging, remove the product,
* The indicator LEDs on the Wireless Charging Pad 02 (sold and unplug the compatible AC adapter
separately) will remain lit blue after charging with this
product. For further information on lighting and charging (sold separately) from the outlet
conditions of the indicator LEDs, read the instructions that
come with the Wireless Charging Pad 02 (sold separately).
68
Turning the Power On/Off
◎ If you move the product from its position after the
indicator LEDs have already lit blue, the product
Turning the Power On
may not charge or may take a long time to charge.
Remove the product, wait about 15 seconds, and 1 Press and hold F (Power button)
place again where the indicator LEDs light blue. until the incoming light turns on
◎ If charging does not start, check that the back The start screen is displayed. (▶P.‌71).
cover is properly attached. Also check that the • For the first time you turn on the product,
charging connection under the back cover is not the initial setting activates. Configure the
soiled.
settings as necessary. For details, refer to
◎ Charging is controlled at a reduced rate during
wireless charging to prolong the life of the
"Initial Settings" in the packaged "Setting
battery pack. Guide".
Getting Ready
◎ When logos are being displayed on the screen, do
not touch the screen because the initial setting of
the touch panel activates. Doing so may prevent
the touch panel from working properly.
◎ If you skip the operation of the initial settings at
the first start-up, you can set later.
69
Turning the Power Off Switching to English Display
1 Press and hold F (Power button) You can switch the language displayed on the
for at least 1 second screen to English.
2 [Power off] 1 Home screen → [ ] → [設定 (Settings)]

→ [システム (System)] → [言語と入
Forcing the Product to Shut 力 (Languages & input)] → [言語
Down and Restart (Languages)]
You can force the product to power off and reboot 2 [English]
when the screen does not respond, or the power The message "起動中のアプリ、メール送受信、ダウン
cannot be turned off. ロードなどが終了される場合があります。"
(Applications, mail transmission/reception,
1 Hold down F (Power button) and
Getting Ready
and downloads may be terminated.) appears,

r (Volume up button) at the same
confirm the message and then tap [OK].
time for at least 11 seconds
◎ If you turn off the product forcibly and restart, an

unsaved data will be lost. Do not perform except
when the product does not respond.
70
③ START icon
Start Screen
The start screen is displayed when the product is
turned on or the sleep mode is deactivated.
◎ Alternatively, tap [ ] → [START]/[CAMERA]/
[PHONE] to display the home screen or activate
Switching to the Home the camera/phone.
Screen from the Start Screen
When the start screen is displayed, you can display Sleep Mode
the home screen by the following operation.
If you press F (Power button) while the backlight of
1 Slide/flick " ① the display is turned on, or no operation is performed
" to the "START" for a certain period, the product enters sleep
direction mode. You can cancel sleep mode by the following
Getting Ready
The home screen is operation.
displayed (▶P.‌72). Or
②
the previous screen
1 In sleep mode, press F (Power
button)
before the sleep mode is
activated is displayed. The start screen is displayed. (▶P.‌71).
• Slide/flick toward ③
"CAMERA"/"PHONE" to 《Start Screen》
activate camera/phone ◎ To change the time to enter sleep mode, home
(▶P.‌81). screen → [ ] → [Settings] → [Display] → [Sleep],
① Clock and select the time.
② Notifications ◎ When you press F (Power button) to display
Displays notifications such as a missing call. the screen in sleep mode, do not touch the
screen. Doing so may prevent the touch panel
• Double-tap a notification to activate notifying
from working properly.
application.
71
Activating the Apps
Basic Operations
Some functions activated by tapping app icons
may incur communication charges.
Using the Home Screen
1 Home screen → [ ]
The home screen consists of multiple screens. The list of applications is displayed.
Slide/flick right or left to switch them. • Also, swipe the bottom of the home screen
① Status bar ① upward to display the app list.
② Shortcut/folder
2 Tap the app to activate
③ Quick start area • If you tapped a folder, tap the app to activate
④ Apps icons from the app list in the folder.
② Switching the Home App

If you installed a home app, you can switch the
③
home app of the product.
④
1 Home screen → [
Basic Operations
] → [Settings] →
《Home Screen》
[Apps & notifications] → [Default
apps] → [Home app] → select the
home app
72
Icon Description
Monitoring the Product's File receiving request from other
Status Bluetooth® device
Send/upload data
Viewing Icons Receive/download data
Notification icons for missed calls, new mail, Installed completely
running operations, etc. are displayed on the left of Notification of updating installed apps
the status bar, and status icons for product status Software update
are displayed on the right. Screenshot completed
■ Main Notification Icons USB tethering
Bluetooth® tethering
Icon Description
Bluetooth® tethering is used with USB
Time tethering
Missed call microSD memory card is mounted
New +Message/New SMS
New e-mail message (au-mail) ■ Main Status Icons
Basic Operations
New e-mail message (Gmail) Icon Description
Emergency rapid mail Battery level
Snooze alarm or alarm ended without 100%/ Empty/ Charging/
canceling Battery care mode ON
Notification of calendar
During calling or receiving a call
Auto answering exists
Audio notification for Outdoor Portal
enabled
Internal memory low
73
Icon Description * The 2 networks, "LTE" and "WiMAX 2+", are
available in Japan. In any case of the screen display
Signal strength/Signal condition (LTE/
is "4G". The Company determines the network
WiMAX 2+) less congested to connect due to busy network
Level 4/ Out of service area/ In conditions.
communication
LTE/WiMAX 2+ available*/ Notification Panel
roaming (communication mode
In the notification panel, you can check
according to the network is also notifications and activate apps. Also, ON/OFF
shown.) setting icons appear and the frequently used
Airplane mode is set functions can be set immediately.
Wi-Fi® signal strength
1 Slide down the status bar
Level 4/ Level 0 The notification panel is displayed.
Alarm setting • Tap C to disable the notification panel.
Manner mode ON
Vibration ON/
Mute ON/
Basic Operations
Drive mode ON ◎ Also, slide up the notification panel to disable the

notification panel.
Connecting with Bluetooth® device
◎ To delete notifications individually, flick the
Auto answering set notifications left/right to delete. Tap "CLEAR ALL"
Auto answering: Set/ : Full on the bottom right of the screen to delete all
VPN connection the notifications. Some notifications cannot be
deleted.
GPS in use
Data saver set
Wi-Fi® tethering
74
Setting Silent Mode
Set the silent mode so as not to disturb others ◎ Using the sound volume adjustment bar, you can
around you in public places. adjust media sound volume such as music or
videos. Also, tap " " to display the sound setting
1 Press r (Volume up button) or l screen to specify the detailed sound settings.
(Volume down button) ◎ Even in the silent mode, the shutter clicks for
The silent mode icon and sound volume photos. Also during movie shooting, start/stop
adjustment bar is displayed. and timer beeps sound.
◎ By selecting "Drive", a guidance is played to
2 Tap the silent mode icon to switch notify the caller that you are driving a car when
the silent mode type receiving a call and auto answering activates
automatically.
◎ While data is played in the muting state in the
Silent mode silent mode, press r (Volume up button)/l
icon (Volume down button) to adjust the volume.
Volume
Basic Operations
adjustment
bar
Silent mode type is switched as follows every

time you tap the silent mode icon.
• : Silent mode OFF
• : Silent mode (vibration)
• : Silent mode (mute)
• : Driver mode 75
Setting Airplane Mode
When airplane mode is set to ON, all the wireless ◎ Even if the airplane mode is set to ON, the wireless
functions (telephone, data communication, wireless LAN (Wi-Fi®)/Bluetooth® function can be set to ON.
LAN (Wi-Fi®) function, and Bluetooth® function) are Using the product on airplanes or in hospitals may
disabled. be restricted, follow the instructions given by the
respective airlines and institutions.
1 Slide down the status bar → [Airplane ◎ When the airplane mode is set to ON, the
mode] telephone function (calling) is disabled. Even
if the airplane mode is set, you can call 110
When the airplane mode is set to ON, " " is
(Police), 119 (Fire/Ambulance), 118 (Maritime
displayed in the status bar.
rescue). After making a call, the airplane mode is
• Alternatively, from home screen → [ ] → automatically set to OFF.
[Settings] → [Network & internet] → set ◎ When the airplane mode is set to ON, the
"Airplane mode" to "ON" to enable airplane telephone function (receiving) is disabled.
mode. Sending/receiving mail, wireless LAN (Wi-Fi®)
function, and communication using Bluetooth®
function are also disabled.
Basic Operations
76
Checking Your Phone Registering Fingerprints
Number
[Security & location] → [Fingerprint]
• To additionally register a fingerprint, from the
[Profile]
home screen → [ ] → [Settings] → [Security
The profile screen is displayed.
& location] → [Fingerprint] → deactivate the
security → [Add fingerprint].
Using the Fingerprint 2 [NEXT]
Function From here on, follow the on-screen instructions.
The product is equipped with a fingerprint sensor

(F) for fingerprint authentication, which allows
you to unlock the screen by touching the sensor
with your registered finger.
• For precautions on using fingerprint
Basic Operations
authentication and using fingerprint sensor,
see "取扱説明書詳細版 (Full Instruction Manual)"
(Japanese) available on the au homepage.
77
Authenticating with Displaying Menu
Fingerprints There are two types of methods to display a menu
screen: by tapping " " or " ", and by long-touching
1 While the start screen is displayed, the entry field or item.
touch the fingerprint sensor (F)
with the registered finger Setting Home Screen
By sliding/flicking " " on the start screen, a
Set various displays of the home screen.
screen to enter the specified unlocking method
of screen lock is displayed. 1 Home screen → long-touch an empty
space → [Home settings]
The home settings screen is displayed.
◎ If your fingerprint is not recognized five times
successively, you can no longer authenticate.
2 Notification Set whether to display
dots notification dots on the app
Wait for a while and try again, or slide/flick " " and icons.
enter the specified unlocking method of screen Add icon to Set whether add the icon on the
Basic Operations
lock. Home screen home screen when a new app is

downloaded.
Left side of Set the display that appears
the main home when the home screen is slid/
screen flicked to the right.
Order of the Set the display order of the apps
apps list on the app list.
3 Set each item
78
Saving Battery Consumption Charging Other Mobile
You can extend the battery life without fully Devices
charging the battery.
You can charge mobile devices that are compatible
1 Home screen → [ ] → [Settings] → with USB PD standard by using the product and
[Battery] → [Battery care mode] → USB Type-C cable (sold separately).
[ON] 1 Insert the USB Type-C cable
When the battery care mode is set, the heart (commercially available) with the
mark " " is attached to the battery icon on the
other mobile device connected
status bar.
straight into the external connection
terminal of the product
◎ Charging stops at 85% when the battery care 2 Home screen → [ ] → [Settings] →
mode is set to ON. The battery usable time
[Connected devices] → [USB]
becomes short on one charge.
Basic Operations
◎ When the battery care mode is set to ON at 86%
or more, charging does not start until charging 3 Set "Charge connected device" to ON
decreases to 85%. The connected mobile device is charged.
• When charging the product using other
mobile device, set "Charge connected device"
to OFF.
79
◎ Use a USB Type-C cable that is compatible with
USB PD (Power Delivery) (sold separately).
◎ Charging may not be possible when the battery
level of the product is low. Charge the product
before using this function.
◎ Charging may not be possible when a long cable
is used. Also, charging may not be possible via a
hub or a conversion connector.
◎ Connected devices that are not compatible with
USB PD standard cannot be charged. Charging
all the USB PD compatible devices is not
guaranteed.
Basic Operations
80
Receiving a Call
Telephone
1 Incoming call panel on the top of the
screen → [ANSWER]
Making a Call The call starts.
• You can also answer the call by sliding [
1 Home screen → [ ] → tap "DIALPAD"
Answer] to the right during sleep mode or
tab
when the start screen is displayed.
The phone number input screen is displayed.
2 Talk → [ ]
2 Enter a phone number
When calling to fixed-line phones, enter the
area code first even if the recipient is in the Making a Call from Contacts
same city.
1 Contacts list screen → tap the
3 [ ] → talk → [ ] contact
Press r (Volume up button)/ l (Volume The details screen of the contact is displayed.
down button) during a call to adjust volume
(other party's voice). 2 [ ]
Telephone
◎ If you cover the screen by your face etc. while
dialing/calling, the display turns off to prevent
false operation.
◎ Note that even if you cover the mouthpiece
(microphone), the sound can be conveyed to the
other party.
81
happens, bring it to an au shop or TOYOTA store
Appendix dealing in au (not accepted by some shops).
・ When using the product overseas, the software
update functions may not be available.
Updating Software ・ Any operations are not available during software
update. Calling 110 (Police), 119 (Fire/
You can update the product to the most recent Ambulance), 118 (Maritime rescue) and 157
software for optimal performance and to get the (Customer Center) is not available. Alarm does
latest enhancements. not work, either.
■ Notes on Software Update
・ You are charged for data communication when
Downloading Software into
connecting to the Internet from the product using the Product to Update
data communication. Data communication takes Downloading updated software via the Internet
place in large amounts especially for updating directly from the product is available.
the OS. Use of Wi-Fi® is recommended.
・ When software update is necessary, you will be 1 Home screen → [ ] → [Settings] →
informed on the au homepage, etc. For details, [System] → [System update]
contact an au shop or Customer Center (call toll- From here on, follow the on-screen instructions.
free 157). In addition, users of the product will
receive a notice from au, when software update
is necessary to improve the functionality of the
◎ Note that depending on the terms of your
product. subscription contract, communication charges
・ It is recommended to back up your data before may be incurred for the product to automatically
Appendix
updating software. search for available networks.

・ If software update has failed or stopped, perform ◎ After a software/OS update, the product cannot
the same procedure again. revert to the previous version software.
・ If the software update fails, it may become
impossible to operate the product. If this
82
https://www.au.com/online-manual/kyv46/
Troubleshooting https://www.au.com/support/service/mobile/
Before you assume that the product is guide/manual/
malfunctioning, check for possible remedies in "ク Trouble Detail Page
イック診断 (Quick check)" and "トラブル診断 (Trouble Cannot turn on Is the battery pack charged? P.‌64
check)" on "故障紛失サポート (Repair and Delivery power Is the battery pack attached
P.‌56
Support)" app. properly?
■ Quick check Are the terminals of the
－
battery pack dirty?
Home screen → [ ] → [サポート (Support)] →
F (Power button) pressed
[故障紛失サポート (Repair and Delivery Support)]
and held until the charging P.‌69
→ [クイック診断してみる (Try quick check)] light turns on?
(Displayed language is Japanese only) Cannot charge Is the specified charger
■ Trouble check (sold separately) connected P.‌65
Home screen → [ ] → [サポート (Support)] → [故 properly?
障紛失サポート (Repair and Delivery Support)] → Is the battery pack attached
P.‌56
[便利な機能 (Useful functions)] → [トラブル診断を properly?
試す (Try trouble check)] (Displayed language is Is the product or the battery
at a high or low temperature?
Japanese only)
The product may stop P.‌64
Also available on the following au home page. charging depending on
https://www.au.com/trouble-check/ temperature.
Is the specified accessory
(adapter, etc.) used for P.‌65
charging?
Appendix
Cannot Check for scratches on the
authenticate fingerprint sensor and wipe P.‌77
See also "Online Manual" (Japanese) or "取扱説 the fingerprint off dirt on it.
明書詳細版 (Full Instruction Manual)" (Japanese) Check if your fingerprint is
P.‌77
available on the au homepage. stained, wet, or dry.
83
Trouble Detail Page Trouble Detail Page
Cannot Is the product placed in the Charging The charging indicator is still
charge with correct orientation and within does not lit after completing charging,
the Wireless a chargeable area on the P.‌67 complete with but this is not abnormal. P.‌67
Charging Wireless Charging Pad (sold the Wireless Check the display on the
Pad (sold separately)? Charging phone.
separately) Is there any foreign object Pad (sold Is the product or the battery
between the product and the separately). at a high or low temperature?
P.‌67
Wireless Charging Pad (sold Charging sometimes takes a －
separately)? long time depending on the
Are the Wireless Charging temperature.
Pad (sold separately) and Charging while using the
P.‌67
special AC Adapter properly product can also cause －
connected? charging to take a long time.
Is the product or the battery Cannot You can force the product
at a high or low temperature? operate/The to power off and restart by
The product may stop P.‌64 screen does holding down F (Power
－
charging depending on not respond/ button) and r (Volume up
temperature. Cannot turn off button) at the same time for
Is the back cover attached the power at least 11 seconds.
P.‌56
properly? The power Is the battery pack
If the battery pack is at the is turned off adequately charged? P.‌64
end of its service life and is automatically
bulging, you may not be able － The power Is the battery pack
to charge wirelessly Replace is turned off adequately charged?
the battery. while the wake- P.‌64
up logo is
Appendix
displayed
84
Cannot make Is the power turned on? P.‌69 Cannot connect Is Wi-Fi® signal strong
P.‌74
calls Is the au IC card inserted? P.‌61 to Wi-Fi®
enough?
Was the number entered Is Wi-Fi® setting completed? －
correctly? P.‌81 Is the product or the battery
(Was the area code entered?) at a high temperature?
Did you tap " " after entering The product may stop －
P.‌81 functioning if at a high/low
the number?
Is "Airplane mode" still set? P.‌76 temperature.
Cannot receive Is the signal strong enough? P.‌74 Is "Airplane mode" still set? P.‌76
calls Is the product within the Display/ Is the "Ring volume" set to
P.‌74 －
service area? incoming light the minimum?
turns on but Is "Silent mode" set?
Is the power turned on? P.‌69
ringtone does P.‌75
Is the au IC card inserted? P.‌61 not sound
Is "Incoming Reject" still set? － Cannot operate Is the power turned on? P.‌69
Is "Airplane mode" still set? P.‌76 the buttons or Is the security setting for the
Is "Call forwarding services" touch panel －
－ start screen set?
still set? Turn off the power and then
Is the product within the P.‌69
" " (out of turn it on again.
service area) service area or where signal P.‌74 Cannot operate Check for the correct
appears is good enough? －
the touch panel operation of the touch panel.
Is the built-in antenna as intended Turn off the power and then
P.‌52 P.‌69
covered with finger, etc.? turn it on again.
Is a card inserted other than A message The battery is almost empty.
P.‌60
the au IC card? indicating that
Appendix
charging P.‌64
is necessary is
displayed
85
The product Is "Auto answering" set? Cannot hear/ Is the call volume set to the
P.‌81
answers hard to hear minimum?
－
calls when it the other Is the receiver/speaker
shouldn't party's voice covered with your ear?
P.‌52‌
The battery Is it adequately charged? Place the receiver/speaker to
pack can only • Charge until the red P.‌64 your earhole.
be used for a charging lamp turns green. Cannot use Is the connector inserted
short time Does the battery pack microphone correctly?
have adequate service life P.‌29 of earphone Insert the connector straight P.‌92‌
remaining? microphone into the external connection
Is the product left in the terminal.
place for a long period where Operation Operation becomes unstable
P.‌74
" " (out of service area) speed when available memory is low.
appears? decreased/ When available memory is
When making a Is the product within the apps operate low, delete unnecessary apps P.‌73
call, there is a service area or where signal P.‌74 unstably/ to secure free memory.
busy signal and is good enough? cannot activate
the call does some apps
The wireless line is extremely
not go through Settings made Is the caller ID notified? If
busy or the party is calling. －
the receiver for specified the caller does not notify the
Retry later.
contacts do caller ID, ringtone setting in
Display goes Is the time period before not work Contacts is not effective. －
－
off shortly entering "Sleep" set to short? Group's incoming settings
Display is dark Is the "Brightness level" set in Contacts is not effective,
－
to dark? either.
Is the product or the battery Are two or more same
Appendix
at a high temperature? telephone number registered －

The display may become － in the phone book?
dark depending on the
temperature of the product.
86
Trouble
microSD
Detail
Is the microSD memory card
Page
After-Sales Service
P.‌63
memory card correctly inserted?
cannot be Is the microSD memory card
■ When Asking for Repair
recognized －
unmounted? For repair, contact Repair and Delivery Support
Camera does Is the product or the battery Center.
not operate at a high temperature? The
P.‌64 During the Repairs will be done based on the terms
product may stop functioning
warranty of services of the free-of-charge repair
if at a high/low temperature.
period warranty.
Cannot make Is the specified au IC card
P.‌61 Outside We shall repair the product for a charge
an emergency inserted?
the as requested by the customer if repair
call Is a card other than specified
－ warranty renders it usable.
au IC card used? period
Is the product within the * The warranty period is one year from the day when you purchase
service area or where signal P.‌74 the product.
is good enough?
Appendix
87
◎ The battery pack is not covered by the free-
of-charge repair warranty except for events
◎ Before handing the product for repair, make a arising from defects in battery materials and
backup of the contents of memory since they manufacturing.
may disappear during repair. Note that the ◎ The accessories and samples such as the front
Company shall not be liable for any damages and screen other than the product are not covered by
loss of income should the contents of memory be the free-of-charge repair warranty.
altered or lost.
◎ Recycled parts that meet the Company's quality ■ Performance Parts for Repair
standards are sometimes used for repair.
◎ au portable terminals collected by Replacement
The Company retains performance parts for
cell phone delivery service which you used before repair of the KYV46 main unit and its peripherals
are recycled to portable terminals for replacement for 4 years after discontinuation of production.
after repairs. Also, parts replaced by au after- Performance parts for repair refers to parts required
sales service are collected and recycled by the for maintaining the functions of the product.
Company. They are not returned to customers.
◎ Instances where the product has been changed, ■ Terms of Services of Free-of-
modified, or analyzed (including software Charge Repair Warranty
modification or analysis (including rooting,
etc.) reverse-engineered, reverse-compiled, or 1. When you apply for repair, inform us of your
reverse-assembled) or has been repaired at a serial number (IMEI number). You can check
location other than an authorized repair location the main unit or the sticker attached on the
designated by the Company may not be covered packaging box for the serial number (IMEI
by warranty or may prevent the product from number).
being accepted for repairs.
2. Repairs will be done based on the terms of
Appendix
services of the free-of-charge repair warranty

when the product is used correctly based
on the instruction manual and the product is
malfunctioning.
88
3. Repairs will be charged in the following cases * The warranty guarantees that free-of-charge repairs will be done
based on the terms of period and conditions indicated above.
even during the warranty period. (Also, the Therefore, the warranty does not limit your legal rights against
product cannot be repaired in some cases.) persons in charge of the warranty and other operators.
① When the product is not used correctly
■ Repair and Delivery Support
based on the instruction manual. ② When the
product is malfunctioning or damaged due to An after-sales service membership program on a
inappropriate modification and repair. ③ When monthly basis called "Repair and Delivery Support"
the product is repaired by repair offices other is available for using your au portable terminal for
than the company specified. ④ When the a long time without worries. This service expands
product is malfunctioning or damaged due to coverage for many troubles including malfunction,
a handling fault or accident. Or when there are theft and loss.
some traces that the product is damaged by For the monthly fee and details of this service,
falling, water or humidity. ⑤ When the product is check on the au homepage.
malfunctioning or damaged due to earthquakes, https://www.au.com/mobile/service/kosho-
storms, floods or other natural disasters, as well funshitsu/
as fires, salt, abnormal voltage, etc.
4. Repairs may be refused depending on the
damage condition of devices.
5. Note that the company shall not be liable for
any damages and loss arising from the product
malfunction.
6. The Company assumes no responsibility for any
accidents when the product is connected with
Appendix
an unspecified device.
7. On-site repair is not available.
8. This warranty is valid only in Japan.
89
SIM Unlock
◎ You can apply for membership only at the time of This product can be SIM-unlocked. SIM-unlocking
purchasing your au portable terminal. the product allows other-carrier SIM cards to be
◎ Once you cancel the membership, you cannot used with it.
reapply for it until you purchase an au portable • Requests can be made for SIM-unlocking on the
terminal next time.
au homepage or at an au shop.
◎ Note that when changing the model or purchasing
an extra portable terminal, this service only
• Some services, functions, etc. may have
covers the most recently purchased au portable restrictions when an other-carrier SIM card is
terminal. used. The Company does not guarantee operation
◎ When an au portable terminal is handed over to whatsoever.
you or someone else, the "Repair and Delivery • To set up your phone after unlocking SIM lock,
Support" membership is also handed over to the from the home screen, [ ] → [Settings] →
successor of the portable terminal. [System] → [About phone] → [SIM card status] →
◎ When you get a new au portable terminal by
[SIM STATUS UPDATE].
changing the model, purchasing an extra portable
terminal, etc., the "Repair and Delivery Support"
• For details, refer to the au homepage.
membership for the old au portable terminal is (https://www.au.com/support/service/mobile/
automatically canceled. procedure/simcard/)
◎ Service contents are subject to change without
notice.
■ au IC Card
The au IC card is lent to you by au. In case of
Appendix
loss or damage, the card will be replaced at your

expense. When malfunction is suspected, or
in case of theft or loss, contact an au shop or
TOYOTA store dealing in au.
90
■ Wireless Charging Pad 01 (0101PUA)
Related Accessories (sold separately)
■ Battery pack (KYV46UAA) ■ Wireless Charging Pad 02 (0102PUA)
■ Back cover (KYV46TLA/KYV46TRA/ (sold separately)
KYV46TKA) ■ KYOCERA 3.5ΦType-C conversion cable
■ Front cover (KYV46VLA/KYV46VRA/ (0401QNA)
* Requires a MicroB to Type-C Conversion Adapter (sold
KYV46VKA)
separately).
■ Front screen (KYV46KGA)
■ USB cover (KYV46WAA)
■ Type-C Common AC Adapter 01 (0601PQA)
(sold separately) ◎ Accessories can be purchased at au online shop.
■ Type-C Common AC Adapter 02 (0602PQA) https://onlineshop.au.com/
(sold separately)
■ MicroB to Type-C Conversion Adapter
(0601PHA) (sold separately)
■ Common AC Adapter 05 (0501PWA)
(sold separately)*
■ au Carrying Case G Black (0106FCA)
(sold separately)
Appendix
91
Using Earphones Earphone
(commercially
■ Using an Earphone (Commercially available)
Available) with a KYOCERA 3.5

φType-C Conversion Cable
KYOCERA
(0401QNA) (Sold Separately) 3.5φType-C
conversion cable
An earphone (sold separately) can be used by
(sold separately)
connecting a KYOCERA 3.5φType-C conversion
cable (0401QNA) (sold separately).
1 Connect the earphone (commercially External

available) and KYOCERA 3.5φType-C connection
terminal
conversion cable (0401QNA) (sold
separately)
2 Open the USB cover of the product (▶
P.‌65)
3 Insert the KYOCERA 3.5φType-C
conversion cable (0401QNA) (sold
◎ Depending on an earphone (commercially
separately) in the product available), you may not be able to connect
Insert the plug of KYOCERA 3.5φType-C the KYOCERA 3.5φType-C conversion cable
Appendix
conversion cable (0401QNA) (sold separately) (0401QNA) (sold separately).

straight into the external connection terminal.
92
Main Specifications Charging
times
Type-C
Common
Approx. 170 minutes
(estimate) AC Adapter
■ Main Unit 01 (sold
Display Approx. 5.0 inches, approx. 16.77 separately)
million colors, Transparent TFT Type-C Approx. 170 minutes
1,080 × 1,920 dots (FHD) Common
Weight Approx. 200 g AC Adapter
02 (sold
Dimensions Approx. 73 × 150 × 13.4 mm (thickest
separately)
(W × H × D) part approx. 17.4 mm)
* Excluding protrusions Wireless Approx. 230 minutes
Charging
Internal memory*1 ROM: Approx. 64GB
Pad 02 (sold
RAM: Approx. 4GB
separately)
Continuous In Japan Approx. 1,300 minutes
Camera image pixel CMOS
call time Overseas Approx. 690 minutes
Effective out-camera pixels Approx. 24 million pixels
(GSM)
Effective wide-camera Approx. 8 million pixels
Continuous In Japan Approx. 490 hours
pixels
standby Overseas Approx. 520 hours
time Effective in-camera pixels Approx. 8 million pixels
(GSM)
Wireless LAN (Wi-Fi®) IEEE802.11 a/b/g/n/ac
Continuous tethering time Approx. 830 minutes
function compatible
Maximum number of Wi- 10 devices
Fi tethering connection
®
devices
Appendix
93
Bluetooth® Compatible Bluetooth® standards Bluetooth® Supported AAC
function version Ver.5.0 compatible*2 function Bluetooth LDAC
Output Bluetooth® standards profile*4 DUN (Dial-Up
Class 1 Networking Profile)*5
Communication Within 10 m with no Frequency 2.4 GHz band
range*3 obstacles in the range bands
Supported GATT (Generic Attribute *1 Since the storage is shared by data and apps, storage space
Bluetooth Profile) may be reduced depending on the usage of apps.
*2 It is confirmed that the product and all Bluetooth® devices are
profile*4
SPP (Serial Port Profile)
compliant with Bluetooth® standards designated by Bluetooth
A2DP (Advanced Audio SIG, and they are authenticated. However, procedures may
Distribution Profile) differ or data transfer may not be possible depending on the
AVRCP (Audio/Video device's characteristics or specifications.
Remote Control Profile) *3 It changes according to objects obstructing devices and
HSP (Headset Profile) signal reception.
HFP (Hands-Free Profile) *4 Specifications provided in Bluetooth® standards for making
communication between Bluetooth® compatible devices in
OPP (Object Push Profile)
accordance with their intended use.
PBAP (Phone Book *5 Supported for some car navigation systems only. See the au
Access Profile) homepage for usage. (JAPANESE)
HID (Human Interface
Device Profile)
PAN (Personal Area
Networking Profile) ◎ The continuous talk time and continuous standby
PAN-NAP (Personal Area
time may drop to less than half depending on
Networking-Network
the battery charging status, usage environment
Access Point)
such as temperature, reception condition at
PAN USER (Personal
Area Networking-User) the location where the product is used, and the
Appendix
HOGP (HID over GATT function settings.

Profile)
apt-X
Bluetooth SSP
MAP (Message Access
Profile)
94
Specific Absorption Rate (SAR) kg (*2). There may be slight differences in SAR levels
among individual products, but they all satisfy the
of Cell Phones limit.
This model KYV46 mobile phone complies with The actual SAR of this cell phone while talking
Japanese technical regulations and international on the phone can be well below that indicated
guidelines regarding exposure to radio waves. above. This is due to the cell phone being designed
This cell phone has been designed in observance to only output the minimum power required to
of the Japanese technical regulations (*1) regarding communicate with a base station. Therefore in
exposure to radio waves and limits to exposure general, the closer you are to a base station, the
to radio waves recommended by equivalent lower the power output of the cell phone is.
international guidelines. These international This cell phone can be used in positions other than
guidelines were set out by the International against your head. Use a carrying case or similar
Commission on Non-Ionizing Radiation Protection accessory that holds the phone at least 1.5 cm
(ICNIRP), which is in collaboration with the World separated from the body and ensure no metal
Health Organization (WHO), and the permissible parts are located between you and the cell phone.
limits include a substantial safety margin designed Under these conditions, this cell phone satisfies
to assure the safety of all persons, regardless of Japanese technical regulations and international
age and health condition. guidelines for radio wave protection.
The Japanese technical regulations and The World Health Organization has stated that "a
international guidelines define the limits using large number of studies have been performed over
a unit of measurement known as the Specific the last two decades to assess whether mobile
Absorption Rate (SAR), which represents the phones pose a potential health risk. To date, no
average amount of radio frequency energy adverse health effects have been established as
Appendix
absorbed by the human body. The SAR limit for cell being caused by mobile phone use".
phones is 2.0 W/kg. The highest SAR value for If you would like to know more detailed information,
this cell phone when tested for use at the ear is please refer to the WHO website.
0.607W/kg (*2). The highest SAR value for this cell https://www.who.int/emf
phone when tested for use on the body is 0.793W/ Please refer to the websites listed below if you
95
would like to know more detailed information
regarding SAR.
FCC Notice
This device complies with part 15 of the FCC
○ Ministry of Internal Affairs and Communications
Rules. Operation is subject to the following two
website:
conditions: (1) This device may not cause harmful
https://www.tele.soumu.go.jp/e/sys/ele/index.
interference, and (2) this device must accept any
htm
interference received, including interference that
○ Association of Radio Industries and Businesses
may cause undesired operation.
website:
https://www.arib-emf.org/01denpa/
Note:
denpa02-02.html (Japanese)
This equipment has been tested and found to
○ au homepage:
comply with the limits for a Class B digital device,
https://www.au.com/english
pursuant to part 15 of the FCC Rules. These limits
*1 Technical regulations are defined by the Ministerial Ordinance are designed to provide reasonable protection
Related to Radio Law (Article 14-2 of Radio Equipment
Regulations). against harmful interference in a residential
*2 This includes the wireless function that can be used installation. This equipment generates, uses,
simultaneously.
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to radio
Appendix
or television reception, which can be determined

by turning the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
96
- Reorient or relocate the receiving antenna. complies with the FCC guidelines and these
- Increase the separation between the equipment international standards.
and receiver.
- Connect the equipment into an outlet on circuit Body-worn Operation
different from that to which the receiver is This device was tested for typical body-worn
connected. operations with the back of the phone kept
- Consult the dealer or an experienced radio/TV 0.39 inches (1.0 cm) from the body. To comply
technician for help and for additional suggestions. with FCC RF exposure requirements, a minimum
separation distance of 0.39 inches (1.0 cm)
Warning must be maintained between the user's body and
The user is cautioned that changes or the back of the phone, including the antenna. All
modifications not expressly approved by the beltclips, holsters and similar accessories used
manufacturer could void the user's authority to by this device must not contain any metallic
operate the equipment. components. Body-worn accessories that do not
meet these requirements may not comply with FCC
FCC RF EXPOSURE INFORMATION RF exposure limits and should be avoided. This
Warning! Read this information before using your phone. device is not intended to be used with a lanyard or
strap on the body. The device contains a mounting
Warning! Read this information before using point that may be used to attach the device to
your phone. In August 1996, the Federal equipment, a backpack or tool belt, etc.
Communications Commission (FCC) of the United
States, with its action in Report and Order FCC Turn off your phone before flying
96-326, adopted an updated safety standard for You should turn off your phone when boarding
Appendix
human to radio frequency electromagnetic energy any aircraft. To prevent possible interference
emitted by FCC regulated transmitters. Those with aircraft systems, U.S. Federal Aviation
guidelines are consistent with the safety standard Administration (FAA) regulations require you to
previously set by both U.S. and international have permission from a crew member to use your
standards bodies. The design of this phone phone while the plane is on the ground. To prevent
97
any risk of interference, FCC regulations prohibit
using your phone while the plane is in the air. Export Administration
Regulations
■ FCC Certification Information
● The product is certified by Federal This product and its accessories may be subject
Communications Commission (FCC). to the Japan Export Administration Regulations
The product's FCC ID is JOYKB46. ("Foreign Exchange and Foreign Trade Law"
You can view this certification in the following way. and its related laws). In addition, U.S. Re-export
How to confirm: Regulations (Export Administration Regulations
From [ ] on the Home screen, [Settings] → and the related laws and regulations) may apply
[System] → [Compliance information] to this product and its accessories. To export and
re-export this product and its accessories take
the required measures on your responsibility and
at your expenses. For details on the procedures,
contact the Ministry of Economy, Trade and
Industry, the U.S. Department of Commerce.
Appendix
98
Microsoft®, Microsoft® Excel®, Microsoft® PowerPoint®,
Intellectual Property Rights Windows Media®, and Exchange® are trademarks or
registered trademarks of Microsoft Corporation in the
Trademarks United States and other countries.
Microsoft® Word and Microsoft® Office are product
Company names and product names referred names of Microsoft Corporation in the United States.
to in this manual are trademarks or registered
QR code is a registered trademark of DENSO WAVE
trademarks of the respective companies.
INCORPORATED.
microSD, microSDHC and microSDXC logos are
trademarks of SD-3C, LLC.
Bluetooth® and logo are registered trademarks owned
by the Bluetooth SIG, Inc., and KYOCERA Corporation is
licensed to use those trademarks.
Powered by
WiMAX is a trademark of WiMAX Forum.

Google and Google logo, Android and Android logo, Wi-Fi®, WPA®, Wi-Fi CERTIFIED logo, Wi-Fi Direct®, and
Google Play and Google Play logo, Play Music and Play Miracast® are registered trademarks of Wi-Fi Alliance.
Music logo, Play Movies & TV and Play Movies & TV Wi-Fi CERTIFIED™ is trademark of Wi-Fi Alliance.
logo, Gmail and Gmail logo, Google Maps and Google "Qi (chi)" and the qi symbol are trademarks of the
Maps logo, Google Drive and Google Drive logo, Google Wireless Power Consortium (WPC).
Maps Navigation and Google Maps Navigation logo,
Google Chrome and Google Chrome logo, Google Voice FeliCa is a contactless IC card technology developed
Search and Google Voice Search logo, YouTube and by Sony Corporation.
YouTube logo are trademarks or registered trademarks FeliCa is a registered trademark of Sony Corporation.
of Google LLC. is a registered trademark of FeliCa Networks, Inc.
Appendix
Microsoft®, Windows® and Windows® 7/Windows® 8.1/ Facebook and Facebook logo are trademarks or
Windows® 10 are registered trademarks of Microsoft registered trademarks of Facebook, Inc.
Corporation in the U.S.A. and other countries. Twitter and Twitter logo are trademarks of Twitter, Inc.
The official name for Microsoft® Windows® is Microsoft® Instagram and Instagram logo are trademarks or
Windows® Operating System. registered trademarks of Instagram, LLC.
99
Amazon, Amazon.co.jp, and Amazon.co.jp logo are the THIS PRODUCT IS LICENSED UNDER THE AVC PATENT
trademarks or registered trademarks of Amazon.com, PORTFOLIO LICENSE FOR THE PERSONAL USE OF A
Inc. or its affiliates. CONSUMER OR OTHER USES IN WHICH IT DOES NOT
Terminal Eleven, the Terminal Eleven logo, and RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN
SkyView® are registered trademarks of Terminal Eleven COMPLIANCE WITH THE AVC STANDARD ("AVC VIDEO")
LLC in the U.S. AND/ OR (ii) DECODE AVC VIDEO THAT WAS ENCODED
BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY
iWnn of OMRON SOFTWARE Co., Ltd. is used for AND/OR WAS OBTAINED FROM A VIDEO PROVIDER
conversion methods for Japanese language, and for LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS
phrase prediction methods for English. GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE.
iWnn IME©OMRON SOFTWARE Co., Ltd. 2009-2019 ADDITIONAL INFORMATION MAY BE OBTAINED FROM
All Rights Reserved. MPEG LA, LLC. SEE HTTPS://WWW.MPEGLA.COM.
THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL (1) ACCESS, the ACCESS logo, and NetFront are
PATENT PORTFOLIO LICENSE FOR THE PERSONAL registered trademarks or trademarks of ACCESS
AND NON-COMMERCIAL USE OF A CONSUMER FOR (i) CO., LTD. in the United States, Japan and/or other
ENCODING VIDEO IN COMPLIANCE WITH THE MPEG- countries.
4 VISUAL STANDARD ("MPEG-4 VIDEO") AND/OR (2) This software is based in part on the work of the
(ii) DECODING MPEG-4 VIDEO THAT WAS ENCODED Independent JPEG Group.
BY A CONSUMER ENGAGED IN A PERSONAL AND
NONCOMMERCIAL ACTIVITY AND/OR WAS OBTAINED "デイリーステップ", "TORQUE (logo)", "LIVE MORE. FEAR
FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO LESS.", "HYBRID SHIELD", "ウェットタッチ", "グローブタッ
PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR チ", and "ACTION OVERLAY" are registered trademarks
SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL of KYOCERA Corporation.
INFORMATION INCLUDING THAT RELATING TO "もじチェン" by LIM Corporation LTD. is used for switching
PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND font. "もじチェン" is a registered trademark of LIM
LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE Corporation LTD.
Appendix
HTTPS://WWW.MPEGLA.COM. The product contains fonts provided by LIM Corporation

LTD.
The product contains fonts provided by Morisawa Inc.
100
"PhotoSolid", the function to avoid blurring still images,
License
is a product of Morpho, Inc. "PhotoSolid" is a registered
trademark of Morpho, Inc.
Users of the product are authorized to use software
"Morpho Rapid Effect", the image effect technology,
installed into the product described in this instruction
is a product of Morpho, Inc. "Morpho Rapid Effect" is a
manual. Pay attention to the following points when
trademark of Morpho, Inc.
using the software.
"Morpho HDR", the HDR (High Dynamic Range)
⒜ The software installed on this product or part of it
technology, is a product of Morpho, Inc. "Morpho HDR"
may not be altered, delivered, modified, analyzed,
is a trademark of Morpho, Inc.
reverse-engineered, derived, and any such actions
USB Type-C™ is a trademark of USB Implementers are prohibited.
Forum. (b) Illegally importing the software or a part of it is
All other company names and product names in this prohibited.
manual are trademarks or registered trademarks of ⒞ This Software is provided without implied warranties
respective companies. of merchantability, fitness for a particular purpose
and noninfringement of third party rights.
Note that the existing license agreement takes priority
for usage of GNU General Public License (GPL),
GNU Library/Lesser General Public License (LGPL)
included in software, software based on other open
source software license and software that KYOCERA
Corporation is licensed.
For information on the Open source software, refer to
"Open source software" as follows;
Appendix
101
■ Open Source Software ■ Recording Diagnosis and Usage
Note that the existing license agreement takes priority for Condition Data
usage of GNU General Public License (GPL), GNU Library/
KYOCERA Corporation asks for users' cooperation in
Lesser General Public License (LGPL) included in software,
order to improve the quality of products and services.
software based on other open source software license
KYOCERA Corporation records and saves data of
and software that KYOCERA Corporation is licensed. The
failure diagnosis and the usage conditions (application
exact terms of GPL, LGPL and some other licenses are
usage by users, log elated to error, detail information of
reproduced in "About phone" in this product. For details, refer
application usage by users (specified functions, usage
to KYOCERA homepage.
frequency, memory/battery status)) in the product in
This product includes software copyrighted by
order to track and cope with diagnosis events such
KYOCERA Corporation and licensed software.
as unexpected shutdown or system error for the
Copyright of the software designed and developed
purpose of improvement of quality and services. Those
complying with the open source software standard
information may be collected upon repair request by
belongs to KYOCERA Corporation or the third
user after obtaining the user agreement.
parties, distribution, reproduction, transformation and
transmission over public lines without consent of
KYOCERA Corporation are prohibited, unless you are
authorized or permitted by Copyright Law.
Appendix
102
For inquiries, call:
Customer Center
For general, charge, operations (toll free)
Business hours 9:00 to 20:00 (7 days a week)
From au cell phones: 157area code not required

From fixed-line phones: 0077-7-111
For service canceling procedure
in case of loss or theft (toll free)
Business hours 24-hour (7 days a week)
From au cell phones: 113 area code not required

From fixed-line phones: 0077-7-113
In case above numbers are not available,
0120- 977- 033 (except Okinawa)

0120- 977- 699 (Okinawa)
Cell phone and PHS operators collect and recycle unused
telephones, batteries and battery chargers at stores
bearing the logo regardless of brand and manufacturer
Repair and Delivery Support Center to protect the environment and reuse valuable resources.
For loss, theft or damage (toll free)
Business hours 9:00 to 20:00 (7 days a week)
From fixed-line phones/au cell phones,
0120- 925- 919

September 2019, 1st Edition
Sales: KDDI CORPORATION • OKINAWA CELLULAR TELEPHONE COMPANY
Manufactured by: KYOCERA Corporation

Torque g04 Basic e

Uploaded by

Copyright:

Available Formats

Torque g04 Basic e

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Torque g04 Basic e

Uploaded by

Copyright:

Available Formats

Basic Manual

G04 Basic Operations

This manual is based on the contents of Android™ 9 Pie.

List of Packaged Items Hexagon Wrench (Sample)

• 取扱説明書 (Basic Manual) (Japanese)

Main unit Back cover (KYV46TLA,

■ "Setting Guide" and "Basic

For detailed descriptions of various functions, refer

When Using the Product • Communication is not possible even inside

■ The signs below differentiate between the levels allowed.

Do not adhere anything metal (stickers, etc.

Do not leave the product on unstable or

Doing so may cause fire, burns, or injuries.

loud or using the product continuously for a

Not doing so may cause fire, burns, or injuries

Use the product at the specified power supply

When using electronic medical devices

Malfunctions determined to be caused by such

● Putting stickers or sheets (e.g. commercially ■ Battery Pack

■ Charger ● Some Qi-specification products may experience

■ Camera ● This product is certified by the Federal

and Shock Resistance

Drop Tested by dropping from about 2.0 m in

cover with the

If using the product where seawater or sand, mud,

1 Turn off the power, and with the back

1 Wipe water thoroughly on the surface

of the product with a clean dry lint-

5 Drain water referring to "How to

4 Leave the product for 1 hour or more

2.4DS4/OF4 120, 124,128,132,136,140ch)

Google account password Security (start screen) Lock: Password

Facebook account password

* Strictly manage your account and password to prevent a third

⑨ adjust the display brightness.

4 Attach the battery pack

7 Press the back cover where shown

• The back cover can be closed only when the

battery lock is locked.

6 Attach the back cover

◎ Attaching incorrectly may cause damage to the

◎ Note that mishandling au IC card might cause

unlocking. In that case, remove the card by

1 Turn the power off and remove the

3 Install the battery pack and back

◎ The specified charger (sold separately) is not

is extremely high or low, charging may be

Type-C Common AC Adapter 02

2 Open the USB cover of the product

◎ Note that applying unnecessary force with

2 [Power off] 1 Home screen → [ ] → [設定 (Settings)]

and downloads may be terminated.) appears,

◎ If you turn off the product forcibly and restart, an

② Switching the Home App

Drive mode ON ◎ Also, slide up the notification panel to disable the

Silent mode type is switched as follows every

The product is equipped with a fingerprint sensor

lock. Home screen home screen when a new app is

3 Set each item