AQU4517R4v06

DXXXX-690-862/880-960/1710-2690/1710-2690-65/65/65/65-
14i/14.5i/17.5i/17.5i/-M/M/M/M-R
EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs - 1.4m
Antenna Specifications
Electrical Properties
690 – 862 (r) 2 x (1710 - 2690) (yL/yyR)
880 – 960
Frequency range (MHz) 1710 - 2490 -
690 - 803 790 - 862 (rr) 1920 - 2200 2200 - 2490
1990 2690
Polarization +45° , -45°
0 - 12 , continuously adjustable, each 0 - 10 , continuously adjustable, each band
Electrical downtilt (°)
band separately separately
at mid Tilt 13.8 13.9 14.2 17.4 17.8 18.2 18.3
Gain (dBi)
over all Tilts 14.0 ±0.5 14.1 ±0.3 14.3 ±0.3 17.3 ±0.5 17.7 ±0.5 18.1 ±0.5 18.2 ±0.4
Side lobe suppression for first side lobe
> 16 > 16 > 15 > 18 > 18 > 18 > 18
above main beam (dB)
Horizontal 3dB beam width (°) 66 ±1.7 64 ±2.6 64 ±3.5 65 ±3.9 63 ±3.3 62 ±4.8 60 ±4.5
Vertical 3dB beam width (°) 15.2 ±2.3 13.3 ±1.8 11.8 ±2.0 7.1 ±0.6 6.5 ±0.5 5.8 ±0.5 5.2 ±0.3
VSWR < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28 ≥ 28
≥ 28 (690 - 862 // 880 - 960 MHz)
≥ 30 (690 - 862 // 1710 - 2690 MHz)
Interband isolation (dB)
≥ 30 (880 - 960 // 1710 - 2690 MHz)
≥ 30 (1710 - 2690 // 1710 - 2690 MHz)
Front to back ratio, ±30° (dB) > 25 > 25 > 25 > 30 > 28 > 28 > 28
Cross polar ratio (dB) 0° > 18 > 20 > 20 > 19 > 19 > 20 > 20
Max. effective power per port (W) 300 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)
Max. effective power whole antenna (W) 700 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ -150 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

2. Electrical datasheet in XML format is available.

Mechanical Properties
68

(100)
Antenna dimensions (H x W x D) (mm) 1499 x 359 x 178
Packing dimensions (H x W x D) (mm) 1880 x 425 x 255
Antenna net weight (kg) 22.0
Bracket weight (kg) 4.2 (2 units)
Packing weight (kg) 36.3 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material Fiberglass
1347
1499

Radome colour Light grey

Operational temperature (℃) -40 .. +65
Frontal : 475 (at 150 km/h)
Wind load (N) Lateral: 140 (at 150 km/h)
Maximum: 495 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
52

Connector 8 x 4.3-10 Female

Connector position Bottom

Accessories
Item Model Description Weight Units per antenna

Downtilt kit ASMDT0D01 Mechanical downtilt: 0 - 16° 2.1 kg 1 (Separate packing)

136
Product Product
List Category
 AQU4517R4v06
DXXXX-690-862/880-960/1710-2690/1710-2690-65/65/65/65-
14i/14.5i/17.5i/17.5i/-M/M/M/M-R
EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs - 1.4m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/c RS-485B n/c RS-485A DC DC return n/c
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N: rr

HWxxxx…...yL
HWxxxx…….r
yL yyR
HWxxxx……rr

HWxxxx....yyR

r - Red y - Yellow r
L - Left array R - Right array

Pattern sample for reference

690 - 862 MHz 880 - 960 MHz 1710 - 2690 MHz

(r) (rr) (yL/yyR)

137
Product Product
List Category