Scribd
Upload
85 views8 pages

A.C. Program Area Aparatului

This document provides instructions for setting various timer and scheduling functions for a PC-P2HTE/PC-ART Program Timer. It describes how to: 1) Set the current time and day, 2) Program up to 4 schedules including setting on/off times and weekdays, 3) Add a "SHIFT" energy saving schedule with a temperature offset, 4) Enable automatic heating anti-freeze protection, and 5) Lock the remote control settings. The settings involve pressing multiple buttons in a specific sequence to select options and set values.

Uploaded by

Simona Prodanoiu
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
85 views8 pages

A.C. Program Area Aparatului

This document provides instructions for setting various timer and scheduling functions for a PC-P2HTE/PC-ART Program Timer. It describes how to: 1) Set the current time and day, 2) Program up to 4 schedules including setting on/off times and weekdays, 3) Add a "SHIFT" energy saving schedule with a temperature offset, 4) Enable automatic heating anti-freeze protection, and 5) Lock the remote control settings. The settings involve pressing multiple buttons in a specific sequence to select options and set values.

Uploaded by

Simona Prodanoiu
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

Number Subject Date

005 PC-P2HTE/PC-ART Program Timer Setting Thursday, 06 November 2008

Ensure that the Remote Controller is turned OFF before commencing any of the following settings

1)

Setting the actual time and day

2) a)

Setting/programming the timer schedule Press the TIMER button. SET and SCHEDULE will be indicated on the display. Schedule number 1 will flicker. All other schedule numbers will be shown but will not flicker

There are four standard schedule settings and an additional SHIFT (Energy Saving Mode) setting. This is labelled S.

b)

Press the SCHEDULE button. The Schedules will move from setting 1 to S (Energy Saving Mode.) This will be as follows: 1.., 2.., 3.., 4.., S.. Do not use the S setting for your initial set-up. Familiarise yourself with the basic timer setting first.

c)

Select Schedule 1 for the first timer setting. Press OK. The selected schedule number will stop flashing and will be indicated. The hour of the Hour ON time will be flashing.

d)

Press the - SCHEDULE and the hour time, in this case 8.

- DAY arrows to select

Press OK. The hour setting will stop flashing and remain steady. The minutes will flash.

e)

Press the and arrows to select the minutes time, in this case 15 (8.15am). Press OK. The minutes setting will stop flashing and remain steady. The Hour OFF time will now be flashing

f)

Select the Hour Off time by pressing the and buttons and the OK button, repeating the procedure in steps 4 and 5. The example below now shows an Hour On time of 8.15am and an Hour Off time of 9.00am. .

g)

The timer for Schedule 1 is now set. Press the TIMER button to go back to normal operation mode. . When the TIMER button is pressed the SET and SCHEDULE will go off and the operation mode showing the set temperature and the time-clock setting will resume.

h)

To set additional schedules follows steps 1-7 as listed above. Select Schedule 2, then Schedule 3 etc: Typical schedule setting is as follows: Schedule 1 Schedule 2 8.00am on 8.00am on 17.00pm off 13.00pm off

NOTE1:

It is not advisable to use this 7 day timer if you are already using a central station controller. Use the 7 day timer option on the central station for all schedule settings. This is because the central station may override all of your settings.

NOTE 2:

To delete any schedule settings, repeat the procedure as above. When you come to set the hours and minutes, press RESET followed by OK instead of setting hours and minutes. Complete the procedure by pressing the TIMER button to return to normal operation.

Now that the Schedules are set they need to be applied to specific days to allow the timer to work. See next page for step-by-step guide to this procedure.

3) a) b)

Setting schedules to specific week days. Ensure that the timer is off. Press and hold the TIMER button for at least three seconds. SET, the schedule numbers and the days of the week will all be highlighted.

c)

Press the

DAY button to scroll through all of the days.

These will scroll as follows: Mon Tues Weds Thurs Fri Sat Sun Mon, Tues, Wed, Thurs, Fri, Sat, Sun (flashing together) Mon, Tues, Wed, Thurs, Fri (flashing together) Sat, Sun (flashing together) When you have selected the days that you want leave this flashing. d) e) Press the SCHEDULE button to scroll through all of the schedules (1.., 2.., 3.., 4.., S..) Select the Schedule you need for the day you have selected. Press OK. By repeatedly pressing OK you can remove the non-operational schedule settings from the display. The day schedule is now set. Press the TIMER button to go back to normal operation mode.

f)

g)

The remote control display will now show the current time and the NEXT SCHEDULE setting.

Note:- If the operation does not work and NEXT SCHEDULE is flashing, press the SCHEDULE button for three seconds. This will give a constant display and the timer operation will work. 4) SHIFT Temperature Setting (Energy Saving Mode).

A setting of +/-3C or +/-5C can be applied to the schedule setting S. In cooling mode the temperature will differ by +3 or 5C. In heating mode the temperature will differ by -3 or 5C. a) Perform steps 2a to 2f. Select S as the schedule setting. b) After you have selected the Hour off time, press OK as normal. You will then be prompted to enter the temperature shift setting as shown below.

c) Press the and arrows to scroll between 3 or 5C.

d) The timer for Schedule S is now set. Press the TIMER button to go back to normal operation mode. 5) To set Automatic Heating operation (Anti-Freeze protection) In Normal operation mode, press and hold the MODE button for more than 3 seconds. This activates the AntiFreeze protection mode. This is indicated by the words ON in reversed out writing appearing next to the actual time shown here on the left.

a)

b)

c)

To cancel this setting press and hold the MODE button for more than 3 seconds, whilst in normal operation mode.

6)

Anti-Tamper setting (locking the Remote Control) This setting will prohibit the use of the operation mode, temperature adjustment, air-flow and auto-louver settings*.

a) b)

In normal operation mode, press and hold the and buttons for more than 3 seconds OPER. LOCK will appear on the remote control display.

c)

To cancel this setting press and hold the and buttons for more than 3 seconds, whilst in normal operation mode.
Enter controller optional set-up mode F8 Fb to set these parameters first.

You might also like