The document provides specifications for painting shed requirements including:
1. Item quantities for sheet, Z-purlin, corner sheet, and fasteners.
2. Dimensional requirements for the items including size and length.
3. Total estimated areas for the effected zone including 650 sqm for sheet, 650 rms for Z-purlin, and 90 rms for corner sheet.
The document provides specifications for painting shed requirements including:
1. Item quantities for sheet, Z-purlin, corner sheet, and fasteners.
2. Dimensional requirements for the items including size and length.
3. Total estimated areas for the effected zone including 650 sqm for sheet, 650 rms for Z-purlin, and 90 rms for corner sheet.
The document provides specifications for painting shed requirements including:
1. Item quantities for sheet, Z-purlin, corner sheet, and fasteners.
2. Dimensional requirements for the items including size and length.
3. Total estimated areas for the effected zone including 650 sqm for sheet, 650 rms for Z-purlin, and 90 rms for corner sheet.
The document provides specifications for painting shed requirements including:
1. Item quantities for sheet, Z-purlin, corner sheet, and fasteners.
2. Dimensional requirements for the items including size and length.
3. Total estimated areas for the effected zone including 650 sqm for sheet, 650 rms for Z-purlin, and 90 rms for corner sheet.
Download as XLSX, PDF, TXT or read online from Scribd
Download as xlsx, pdf, or txt
You are on page 1/ 14
PINAX STEEL INDUSTRIES PVT LTD
GIDDHA UNIT SHEET REQUIREMENTS - PAINTING SHED
SL NO ITEM SIZE QTY
1 SHEET 1M X 6M 100 Nos 2 Z-Purlin 6M LG 110 Nos 3 Corner Sheet 6M LG 15 Nos 4 Fasteners 5000 Sets VT LTD
REMARKS 650 SQM 650 RMS 90 RMS `
1. Scope Effected Zone (HAZ) on the parent metal and components. They are non-destructive testing methods fo discontinuities that are open to the surface such as cracks, porosity and lack of fusion by liquid penetr
2. Purpose
The purpose of this procedure is to explain the method of applying the liquid penetration non-destructive 3. References
1.1. ASME Code Section V -applicable edition/addenda.
1.2. ASME Code Section I -applicable edition/addenda.
1.6. ASTM-E165-Standard Test Method for Liquid Penetrant Examination.
1.7. Clients specification requirements for acceptance criteria.
1.8. TNE Written Practice
Note: In case of conflict between Code requirements and Client’s specifications, Code requirement prevail. 4. Definitions PT : Penetrant Examination PROCEDURE FOR LIQUID PENETRANT EXAMINATION Procedure No. TNE-LPT-Doc-05 Rev ‘0.’ This procedure & other NDT procedures are available for free download at
t metal and components. They are non-destructive testing methods for detecting he surface such as cracks, porosity and lack of fusion by liquid penetrant testing
o explain the method of applying the liquid penetration non-destructive test.
plicable edition/addenda.
licable edition/addenda.
Div1-applicable edition/addenda.
applicable edition/addenda.
ition.
t Method for Liquid Penetrant Examination.
uirements for acceptance criteria.
ween Code requirements and Client’s specifications, Code requirements shall
5. Responsibilities
The NDT Inspector shall be responsible for conducting and reporting the results of inspection in accord
6. Personnel Qualifications
6.1 All personnel involved in Penetrant Examinations shall be qualified in accordance with the Require
6.2 When the written practice is revised, the certification of NDE personnel remains valid to the requir
6.3 The certification of personnel shall be checked by the QA/QC Manager prior to work commenceme
7. Procedure
This procedure shall be demonstrated prior to use in accordance with the requirements of T-150, ASME
a) Penetrant. b) Penetrant remover/cleaner. c) Developer. d) Lint free cloth. e) Light meter capable o
7.2 Materials:
7.2.1 Only materials of a recognized commercial quality shall be used as identified by the manufacturer’s na
7.2.2 Penetrant materials of the same family group shall be used, mix between family groups is
7.2.3 Certification of contaminant content shall be provided by manufacturers for all liquid penetrant
7.3 Surface Condition:
7.3.1 Generally satisfactory results may be obtained when the surface of the part is in the as-welded, 1500 2250000 1300 1690000
3940000
1984.943 ults of inspection in accordance with project contract .
cordance with the Requirements of Trinity NDT Written Practice for NDE Personnel Qualification.
remains valid to the requirements of the previous revision until the expiry date of the personnel qualification certificate; then, re
rior to work commencement.
quirements of T-150, ASME Code Sec. V. The procedure qualification record shall be attached to this procedure.
h. e) Light meter capable of measuring visible light intensity in lux / foot candles (f.c.). The light meter shall meet the calibration
d by the manufacturer’s name i.e. Ardrox, Ely Chemicals or Magnaflux or as specified by the client.
between family groups is prohibited.
ers for all liquid penetrant materials used on nickel base alloys, austenitic or duplex stainless steels, and titanium. These certificat
e part is in the as-welded, as- rolled, as-cast, or as forged condition. Surface preparation by grinding, machining, or other methods fication certificate; then, recertification to the requirements of the new revision is required.
er shall meet the calibration requirement of T-660 of ASME Code Section V
nd titanium. These certifications shall include the penetrant manufacturers' batch numbers and the test results obtained in accord
machining, or other methods may be necessary where surface irregularities could mask indications of unacceptable discontinuities st results obtained in accordance with Mandatory Appendix II of Article 6, ASME Code Sec. V. These records shall be maintained as
unacceptable discontinuities. Precautions shall be made with the mechanical cleaning not to close the discontinuities open to the cords shall be maintained as required by the referencing Code Section.
discontinuities open to the surface. Etching of the cleaned surfaces may be necessary to open the discontinuities. continuities. 501 68 40 609
110 1800 50 POST + CLEAT ISA 75 X 75 X 8 1013 50 SUPPORT ISA 50 X 50 X 6 5760 50 PURLIL ISMC 100
8573
ITEMS DESCRIPCTION POST + CLEAT ISA 75 X 75 X 8 SUPPORT ISA 50 X 50 X 6 PURLIL ISMC 100
