Scribd
Upload
337 views5 pages

Dte Practical 11

This document describes a laboratory manual for constructing a decade counter using the IC 7490. It provides background on decade counters and the IC 7490. The IC 7490 is an asynchronous BCD counter with 4 flip flops internally connected to provide mod-2 and mod-5 counting. The circuit diagram and observations of the decade counter are presented, showing the output transitions from 0 to 9 with each clock pulse before resetting. Questions about the internal design of IC 7490 and constructing a mod-6 counter are also included.

Uploaded by

03 - Mayuresh Gaikwad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
337 views5 pages

Dte Practical 11

This document describes a laboratory manual for constructing a decade counter using the IC 7490. It provides background on decade counters and the IC 7490. The IC 7490 is an asynchronous BCD counter with 4 flip flops internally connected to provide mod-2 and mod-5 counting. The circuit diagram and observations of the decade counter are presented, showing the output transitions from 0 to 9 with each clock pulse before resetting. Questions about the internal design of IC 7490 and constructing a mod-6 counter are also included.

Uploaded by

03 - Mayuresh Gaikwad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

A Laboratory Manual

for
Digital Techniques
Practical No 11: -Decade Counter using IC 7490.
Enrollment No: - 2001160167
Name of Student: - Gaikwad Mayuresh Suresh

Practical Significance: - Counter is a sequential circuit used for


counting the number of clock pulses. It is a group of Flip-Flops with a
clock signal applied to it. A counter has natural count of 2n where "n" is
number of flip-flop in the counter. Decade counter is a counter which
has ten states from 0 to 9.
Relevant Course Outcomes:- Build simple combinational circuits.
Practical outcome: -• Use IC 7490 to construct decade counter (MOD-
10).
Minimum Theoretical Background: - Decade counter is the one that
goes through 10 unique combinations of output and then resets as the
clock proceeds further. Since it is MOD -10 counters, it can be
constructed with a minimum of four flip-flops. A four bit counter
would have 16 states. By skipping any of six states by using some kind
of feedback or some kind of additional logic, we can convert a normal
four bit binary counter into a decade counter.

IC 7490 is a BCD asynchronous counter. It consists of 4 flip flops,


internally connected so as to provide Mod-2 and Mod -5 counter
functions. These ICs have set and reset inputs. These inputs help in
designing a modulus -M counter. The Mod -2 and Mod -5 counters can
be used independently or in combinations. Flip flop FFA operates as a
mod-2 counter whereas the combination of flip flops FFB, FFC, and
FFD form a mod-5 counter. There are two reset inputs R1 and R2 both
of which are to be connected to logic 1 level to reset the flip flops. The
two set inputs S1 and S2, when connected to logic 1 level, are used for
setting the counter to 1001.for normal operation set and rest inputs are
connected to 0.

Practical Circuit diagram:-


Observation and Result: -
Input Output
No of QD QC QB QA Decimal
Clock Equivalent
Pulses
0 0 0 0 0 0
1 0 0 0 1 1
2 0 0 1 0 2
3 0 0 1 1 3
4 0 1 0 0 4
5 0 1 0 1 5
6 0 1 1 0 6
7 0 1 1 1 7
8 1 0 0 0 8
9 1 0 0 1 9
10 Counter Resets its Output back to Zero
Practical Related Questions: -
Q.1) Draw the internal circuit of IC 7490.
Answer:

Q.2) Draw mod-6 counter using IC 7490.


Answer:

Q.3) How many clock pulses are required for mod 7 counter.
Answer: 7 clock pulses are required for mod 7 counter.
Conclusion: -In this practical, we get to know about Decade
Counter and IC 7490.

You might also like