Radian S
Radian S
Radian S
Radians are simply another way to measure angles. In many areas of mathematics and physics, using radians as opposed to Exam-style question
degrees turns out to be much more convenient. For example, the arc length formula which we will cover soon is greatly We will now go through an exam-style question where you can be expected to use what you have learnt so far.
simplified by using radians. Solving trigonometric equations
You also need to be able to solve trigonometric equations using radians. The method is exactly the same as with Example 5: The diagram shows the cross section 𝐴𝐵𝐶𝐷 of a glass prism. 𝐴𝐷 = 𝐵𝐶 = 4 𝑐𝑚 and both are at right
degrees, but you need to give your answers in radians. angles to 𝐷𝐶. 𝐴𝐵 is the arc of a circle, centre O and radius 6 cm. Given that ∠𝐴𝑂𝐵 = 2𝜃 radians, and
Using Radians that the perimeter of the cross section is 2(7 + 𝜋) cm,
To convert between radians and degrees, you can use the fact that:
▪ If the interval is given in radians, then you should leave your answers in radians.
180° 𝜋
▪ 1 𝑟𝑎𝑑𝑖𝑎𝑛 = Let’s go through an example. a) Show that (2𝜃 + 2𝑠𝑖𝑛𝜃 − 1) = 3 .
It helps to remember the following angles in radians: Example 2: Solve 8𝑡𝑎𝑛2𝑥 = 7 in the interval 0 ≤ 𝑥 ≤ 2. b) Verify that 𝜃 = 6 ,
𝜋
𝜋 𝜋 The interval is given in radians, so we must make sure we work in radians. Don’t forget to switch to
▪ 30° = ▪ 90° = c) Find the area of the cross-section.
6 2 the radians mode on your calculator.
d) Show that when 𝑥 is small,
▪ 45° = ▪ 180° = 𝜋 𝑡𝑎𝑛2𝑥 =
7
S A
4 8
𝜋(2(1−𝑐𝑜𝑠𝑥)−𝑠𝑖𝑛 2 𝑥+𝑠𝑖𝑛𝑥−1) 1
▪ 60° =
▪ 360° = 2𝜋 7
the expression
12𝑡𝑎𝑛𝑥−12
≈ 𝜃.
2
3 2𝑥 = arctan (8) = 0.719
0.719
You can be asked to sketch trigonometric functions giving your angles in radians, so you should be very efficient at Using CAST or a graphical method, our solutions are:
converting between radians and degrees. 0.719
2𝑥 = 0.719, + 0.719
You also need to learn the exact value of certain trigonometric ratios given in radians: ⇒ 2𝑥 = 0.719, 3.86
𝜋
Rearranging: 12𝜃 + 12𝑠𝑖𝑛𝜃 − 6 = 2𝜋
𝜋 √2
▪ 𝑠𝑖𝑛 ( ) =
𝜋 √2
▪ 𝑐𝑜𝑠 ( ) = ▪ 𝑡𝑎𝑛 ( ) = 1 Small angle approximations 𝜋
Dividing by 6 gives: 2𝜃 + 2𝑠𝑖𝑛𝜃 − 1 = 3 as required.
4 2 4 2 4
When 𝜃 is close to zero and measured in radians, we can use the following approximations:
▪ 𝑠𝑖𝑛𝜃 ≈ 𝜃
Arc length 𝜃2 𝜋
▪ 𝑐𝑜𝑠𝜃 ≈ 1 − b) We just need to plug in 𝜃 = 6 to the 𝐿𝐻𝑆 and check it is equal to the RHS.
To find the arc length 𝑙 of a sector of a circle, we can use the formula 2
▪ 𝑡𝑎𝑛𝜃 ≈ 𝜃 𝜋 𝜋 𝜋 𝜋
⇒ 2 ( 6 ) + 2𝑠𝑖𝑛 6 − 1 = 3 + 1 − 1 = 3 = 𝑅𝐻𝑆 so 𝜃 = 6 .
𝜋
▪ 𝑙 = 𝑟𝜃
where 𝑟 is the radius of the circle and 𝜃 is the angle c) A𝑟𝑒𝑎 𝑜𝑓 𝑐𝑟𝑜𝑠𝑠 𝑠𝑒𝑐𝑡𝑖𝑜𝑛 = 𝐴𝑟𝑒𝑎 𝑜𝑓 𝑟𝑒𝑐𝑡𝑎𝑛𝑔𝑙𝑒 𝐴𝐵𝐶𝐷 – 𝐴𝑟𝑒𝑎 𝑜𝑓 𝑠𝑒𝑔𝑚𝑒𝑛𝑡 𝐴𝐵
contained in the sector, given in radians. To see why these are good approximations, we can graph each of the functions against their approximations.
Areas
To find the area of a sector, shown in blue, we can use the formula
1
𝑦 = 𝑐𝑜𝑠𝑥 𝑦 = 𝑠𝑖𝑛𝑥 𝑦 = 𝑡𝑎𝑛𝑥 𝜋
▪ 𝐴 = 2 𝑟2𝜃 Area of rectangle ABCD = 4 × 12𝑠𝑖𝑛 ( 6 ) = 24
𝑥2 𝑦=𝑥 𝑦=𝑥
𝑦 =1− 1 1 𝜋 𝜋 𝜋 √3
2 Area of segment AB = (𝑟)2 (2𝜃 − 𝑠𝑖𝑛2𝜃) = (6)2 ( − 𝑠𝑖𝑛 ) = 18 ( − ) = 6𝜋 − 9√3
2 2 3 3 3 2
To find the area of a segment, shown in yellow, we can use the formula
We can see that around 𝑥 = 0, the graphs are almost identical. This explains why these approximations are
1 suitable for 𝑥 close to zero. There is no set range for which these approximations are to be used. ⇒ 𝐴𝑟𝑒𝑎 𝑜𝑓 𝑐𝑟𝑜𝑠𝑠 𝑠𝑒𝑐𝑡𝑖𝑜𝑛 = 24 − (6𝜋 − 9√3) = 24 + 9√3 − 6𝜋
▪ 𝐴 = 2 𝑟 2 (𝜃 − 𝑠𝑖𝑛𝜃)
4𝑐𝑜𝑠3𝜃−2+5𝑠𝑖𝑛𝜃
1 Example 3: When 𝜃 is close to zero, show that can be rewritten as 9𝜃 + 2.
recall that the area of a triangle is 𝑎𝑏𝑠𝑖𝑛𝜃 1−𝑠𝑖𝑛2𝜃 e) Starting with the numerator:
2
You need to be able to apply the above formulae to problems. Inputting our approximations:
𝑥2
π(2(1 − 𝑐𝑜𝑠𝑥) − 𝑠𝑖𝑛2 𝑥 + 𝑠𝑖𝑛𝑥 − 1) ≈ 𝜋 [2 (1 − (1 − 2
)) − (𝑥)2 + 𝑥 − 1]
(3𝜃)2
Example 1: In the diagram below, AB is the diameter of a circle centre O of radius r cm and ∠𝐵𝑂𝐶 = 𝜃 ⇒ 4𝑐𝑜𝑠3𝜃 − 2 + 5𝑠𝑖𝑛𝜃 ≈ 4 (1 − ) − 2 + 5𝜃 = 2 + 5𝜃 − 18𝜃 2
2
radians. Given that the area of △ 𝐶𝑂𝐵 is equal to that of the shaded segment, show that
𝑥2
𝜃 + 2𝑠𝑖𝑛𝜃 = . ⇒ 1 − 𝑠𝑖𝑛2𝜃 ≈ 1 − 2𝜃 ⇒ 𝜋 [2 (( 2 )) − (𝑥)2 + 𝑥 − 1] = 𝜋[𝑥 2 − 𝑥 2 + 𝑥 − 1] = 𝜋(𝑥 − 1)
1
Area 𝐶𝑂𝐵 = 𝑟 2 𝑠𝑖𝑛𝜃 (area of a triangle, 𝑂𝐶 = 𝑂𝐵 = 𝑟) 4𝑐𝑜𝑠3𝜃−2+5𝑠𝑖𝑛𝜃 2+5𝜃−18𝜃2 (1−2𝜃)(2+9𝜃)
Now considering the denominator:
2 ∴ 1−𝑠𝑖𝑛2𝜃
≈ 1−2𝜃
= 1−2𝜃
= 2 + 9𝜃 as required.
1
Shaded segment = 𝑟 2 ((𝜋 − 𝜃) − sin (𝜋 − 𝜃)) Once you substitute your approximations, it becomes a matter of simplifying your expression to achieve the 12𝑡𝑎𝑛𝑥 − 12 ≈ 12𝑥 − 12 = 12(𝑥 − 1)
2
desired result.
1 1 𝜋(2(1−𝑐𝑜𝑠𝑥)−𝑠𝑖𝑛 2 𝑥+𝑠𝑖𝑛𝑥−1) 𝜋(𝑥−1) 𝜋
Equating: 2 𝑟 2 𝑠𝑖𝑛𝜃 = 2 𝑟 2 ((𝜋 − 𝜃) − sin(𝜋 − 𝜃)) ∴ = =
Example 4: When 𝜃 is close to zero, find the approximate value of 𝑐𝑜𝑠 𝜃 − 𝑠𝑖𝑛 𝜃. 4 4 12𝑡𝑎𝑛𝑥−12 12(𝑥−1) 12
https://bit.ly/pmt-cc
https://bit.ly/pmt-edu https://bit.ly/pmt-cc