TDS Elotex Era200 en

Technical Datasheet Specialty Additive ELOTEX® ERA200
Description
ELOTEX® ERA200 is a highly active, efflorescence reducing additive in powder form Benefits
for cement based building mortars.
 Efflorescence reducing additive in powder
ELOTEX® ERA200 is designed as specialty additive for cement based building form for cement based building mortars
plasters, renders and mortars. It eliminates or drastically reduces the occurrence of  Colour stability improvement
primary and secondary efflorescence.
 Colour brightness improvement
 Ideally suited to eliminate or drastically
ELOTEX® ERA200 is especially recommended for the use in tile grouts, renders,
such as one coat renders (monocouche) or skim coats (putty), brick layer mortars or reduce the occurrence of primary and
other outdoor mortar products. secondary efflorescence
 Increases surface hydrophobicity / water
ELOTEX® ERA200 works as a multifunctional additive with several efflorescence repellency
preventing mechanisms such as reduction of capillary connectivity, size reduction of  Maintains the aesthetics of building
efflorescence forming crystals and reduction of water permeability. It maintains the materials over time
aesthetics of building materials over time.  High efficiency
 Compatible with other additives
ELOTEX® ERA200 works excellent against primary and secondary efflorescence.  Good mixing and wetting properties
Despite reducing the problem of efflorescence ELOTEX® ERA200 improves the
 Excellent workability.
mortar stability, workability and acts also as dispersing / wetting agent and improves
 Improved mortar rheology
the colour stability and brightness. Furthermore it increases the surface
hydrophobicity what is required in coloured one coat renders like “monocouche”.  Dispersing and wetting properties
ELOTEX® ERA200 is free of plasticisers, solvents and film-forming agents. Recommended Application
 Tile grouts
 Base coat renders / plasters
 One coat renders (monocouche)
 Decorative texture renders / plasters
 Skim coat (Putty, Feather Finish, Satin,..)
 ETICS or EIFS composite mortar
 Stencil mortar
 Stone imitation mortars
 Brick layer mortars
TDS ELOTEX® ERA200 – 20.5.2014 - page 1/2

Technical Specifications Quality, Safety and Environment
We recommend all individuals using ELOTEX®
Composition Modified rosin with fatty acid derivative powder, or coming in contact with it, to observe
Appearance Free-flowing yellowish powder the separate Safety Data Sheets. Our safety
Odour Characteristic specialists will be pleased to advise you
Bulk Density 350 – 550 g/l regarding safety, health and environmental
Particle Size < 250 m issues of our products. Akzo Nobel Chemicals
Residual Moisture < 3.0 % AG has been certified according to DIN EN
pH-Value 8.0 – 10.0 (as 10% solution in water) ISO9001 and DIN EN ISO 14001.
Storage Stability 6 months
Packaging, Storage and Handling
Guidelines for use Standard packaging: 10 kg plastic bucket
Store in original packaging.
Powder Processing As a basic rule it is recommended to store
ELOTEX® ERA200 can be mixed with other dry additives in all standard compulsory ELOTEX® powders in a dry location at
type mixers to produce cement-based finished products in powder form. temperatures below 25°C and to process within
ELOTEX® ERA200 provides excellent and rapid homogenization. Major temperature six months after receipt of the delivery. Buckets
increases due to high shear forces should be avoided. Depending on the properties that are stored under pressure, at increased
of the other additives and mixer, the standard mixing time will be in the range of temperature, damaged or left open for an
approx. 1 to 5 minutes. extended period, increase the risk of caking of
the powder.
Dosage and Mixing
ELOTEX® ERA200 is highly efficient and easy to mix with water. Product Liability
Typical dosages of ELOTEX® ERA200 in cementitious dry mortars are from 0.1 to The above information and recommendations
0.4 % on total dry formulation. The optimum concentration is depending on the are based upon our experience and are offered
ultimate requirements on the product and should be tested. As short a mixing time as merely for advice. They do not absolve the
possible is recommendable. consumer from making his own tests. Akzo
Nobel Chemicals AG, their representatives or
Compatibility distributor organizations have no control over
ELOTEX® ERA200 is compatible with all types of cement. As well as with all standard the conditions under which ELOTEX® powders
mortar additives such as redispersible polymer powders, cellulose ethers, are transported, stored, handled or used.
accelerators, retarders, stabilizers, thickeners, defoamers, etc. Responsibility for damage arising from the use
of our products cannot be derived from the
recommendations given. The observance of any
Test Results
intellectual property rights of third parties is the
responsibility of the consumer in each case.
Technical information may not be passed on to

any third party without our previous consent.
with 0.2% ELOTEX® ERA200 w/o additive

Other Information
Version 6 / 20.5.2014
Quick test method for secondary efflorescence. Skim coat is applied on porous clay Replaces version from 20.5.2014
brick and partially immersed into salt solution for several days. Date of 1st issue 6.1.2009
Akzo Nobel Chemicals AG

Industriestrasse 17a, CH-6203 Sempach Station
T +41 41 469 69 69 F +41 41 469 69 00
[email protected], www.akzonobel.com/elotex
TDS ELOTEX® ERA200 - 20.5.2014 - page 2/2

TDS Elotex Era200 en

Uploaded by

Copyright:

Available Formats

TDS Elotex Era200 en

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

TDS Elotex Era200 en

Uploaded by

Copyright:

Available Formats

Technical Datasheet Specialty Additive ELOTEX® ERA200

TDS ELOTEX® ERA200 – 20.5.2014 - page 1/2

Technical information may not be passed on to

with 0.2% ELOTEX® ERA200 w/o additive

Akzo Nobel Chemicals AG

You might also like