GAD-based iC CEBU

Lesson Exemplar

Grade Level: 9 Learning Area: TLE Quarter: 2 Duration: 60 minutes

Learning Area/s Integrated:
Integration Approach Used: (Please tick.)
Multidisciplinary √ Interdisciplinary Transdisciplinary
* Theme-based
I. 21st Century Skills to be developed (Please tick.)
√ Communication Learning and Innovation √ Problem Solving
√ Critical Thinking √ Information Media and Technology √ Life and Career

II. Focused Learning Competency

TLE_IACSS9- 12PMC-IIe-f-12 proper handling of measuring instruments to avoid damage and clean it
before and after using

III. Focused GAD-based Principle to be Integrated

use gender-responsive language to reflect inclusion
IV. Intended Learning Outcomes
Knowledge Identify non-functional and functional tools.
Skills Classify tools according to their uses.
Attitude Analyze the importance of proper handling of measuring instruments to
avoid damage.

Values show appreciation on the importance of proper handling of measuring

instruments to avoid damage
V. Learning Content/s Ensure proper handling of measuring instruments to avoid
damage and clean it before and after using.

Concept Maintenance of measuring instrument.

Themes

Learning Materials card board, manila paper, pentel pen, information

sheets, slide deck
 differentiate safe and unsafe (danger) situations
DRRE Concepts identify necessary basic actions, such as protecting
oneself, to cope with common natural hazards

Curriculum Guide, Computer System Servicing Learner’s

Module,
References https://westportcorp.com/blogs/calibration-repair-services/
how-to-properly-care-for-and-handle-precision-measuring-
instruments

VI. Learning Experiences (5 Es)

1. Engage A. TRUE or FALSE (PRE-TEST). Raise the TRUE card board if the statement is
(10 minutes)
true and the FALSE card board if otherwise.

1. The world’s best measuring instruments are all but worthless if

they can’t be relied on to provide accurate, reliable results.
Possible Answer: True
2. Maintain a high level of reliability and accuracy is by not taking
proper care of them

Possible Answer: False

EXPLANATION:
Maintain a high level of reliability and accuracy is by taking

proper care of them.

3. Do not use penetrating oils or other compounds designed for

purposes other than light lubrication.
Possible Answer: True
EXPLANATION:
For example, avoid spraying your instrument with WD-40, as it
may leave a film that can alter the calibration of the instrument.

4. Whenever you place an instrument in its storage location, be sure

the location is well-protected from destructive elements.
Possible Answer: True
EXPLANATION:
To avoid damage on instruments.
4. Do not drop, throw, or bang measuring instruments against hard
 surfaces.
Possible Answer: True
EXPLANATION:
To prevent damage or miscalibration during use, including
sudden
shock and rough treatment

5. If you use precision instrument often at a workbench, then

consider investing in a rubber mat that can rest on the floor
beneath the edge of the bench.

Possible Answer: True

EXPLANATION:
This will help protect your instrument from damage should they
be dropped.
2. Explore ANALYZE and SHARE. (Group Activity). Distribute envelopes into the
(10 minutes) three groups containing materials and information sheets.
Directions: Read carefully the information sheet/study closely.

How to Properly Care for and Handle Precision Measuring

Instruments
The world's best measuring instruments are all but worthless if they can't be
relied on to provide accurate, reliable results. One key to ensuring that
measuring instruments, such as micrometers, calipers and dial gauges,
maintain a high level of reliability and accuracy is by taking proper care of them.
Below is what you should know about the care and maintenance of these
special precision tools.

Lubricate Instruments Appropriately to Prevent Corrosion

Proper lubrication of measuring instruments will prevent damage due to

corrosion and oxidation. Precision measuring instruments should be lightly oiled
after each use, and any excess oil should be removed from metal surfaces with
a clean, dry cloth. A visibly "wet" instrument can attract and hold minute
particles that can cause internal wear of precisely fabricated parts, especially
those that move against one another.

In addition, do not use penetrating oils or other compounds designed for

purposes other than light lubrication. For example, avoid spraying your
instruments with WD-40, as it may leave a film that can alter the calibration of
the instrument. Even the thinnest layer of a foreign substance can throw off the
accuracy of some measuring instruments, such as calipers and micrometers.

Store Instruments in an Appropriate Environment

Whenever you place an instrument in its storage location, be sure the location
is well-protected from destructive elements. Do not store precision instruments
where they can jostle against one another in a drawer; instead, separate
instruments from one another using dividers or place them in padded cases.
Avoid stacking instruments on top of each other, unless they are well-protected
in cases.

If your work is in an environment where vibration is a problem, keep measuring

instruments stored in an area as far away as possible from vibration and
movement. Over time, these forces can slowly cause your instruments to fall
out of calibration.

In addition, if the storage location is subject to dampness, be sure to use

moisture-removal methods that can help lower the humidity. Silica gel packets
placed in drawers or keeping a storage room air conditioned can also greatly
lessen ambient moisture. If air conditioning isn't possible, then consider
investing in a dehumidifier that can dry the air to appropriate levels.

Know How to Properly Handle Instruments During Use

Once you have a precise measuring instrument in your hand, it becomes that
much more important to protect that tool from harm or providing false readings.
There are a few things you should do that will help prevent damage or
miscalibration during use, including avoiding sudden shocks or rough treatment.
Do not drop, throw, or bang measuring instruments against hard surfaces.

If you use precision instruments often at a workbench, then consider investing

in a rubber mat that can rest on the floor beneath the edge of the bench. This
will help protect your instruments from damage should they be dropped. In
addition, it should go without saying to never use a measuring instrument to pry
or hammer another object.

In addition, keep instruments from experiencing temperature extremes. If you

are handling a measuring instrument, it is important to avoid permitting it to
either heat up or cool down. Expansion and contraction can alter the calibration
of the instrument, and that is why you should endeavor to keep it within a
normal room temperature range. Avoid holding instruments in your hands for an
extended period of time, for example, and don't rest them on surfaces that are
either too hot or cold.

Obtain Professional Recalibration Assistance

Some measuring instruments require occasional recalibration to ensure they

continue to function as designed, and that is why it is important to have a
professional relationship with a precision instrument manufacturer or supplier.
They can keep your instruments in top-notch condition so they'll provide years
of reliable service.
Source: https://www.slideshare.net/kenjoyb/cg-domrac-1?next_slideshow=1
Source: https://www.google.com/search?sxsrf=ACYBGNTzselmK9Y5x66M-
hTqw9Swm4hD3w:1575941924452&q=classify+the+computer+tools+acc
ording+to+their+uses&tbm=isch&source=univ&sa=X&ved=2ahUKEwjItt-
U-
anmAhWOZt4KHWj5CaEQsAR6BAgGEAE&biw=1242&bih=597#imgrc=Xra
2Y4bL_CSTOM
3. Explain POST and EMPHASIZE.
(8 minutes)
Possible Answer: 1. Method of identifying non-functional
tools and equipment
2. Classifications of tools and equipment according to their uses.
3. How to properly care for and handle precision measuring
instruments.

4. Elaborate SELECT and COMPLETE. (Individual Activity)

(5 minutes)
Directions: Classify tools according to their uses.(Students will be given
 different tools and they are going to classify tools according to their
uses and handling safety must be observed).
Possible Answers:
1. measuring 2. holding 3. cutting 4. driving 5. Boring
6. Electrical equipment 7. Miscellaneous tools/instrument/equipment
5. Evaluate COLLABORATE and PERFORM (Differentiated Activity).
(15 minutes)
NOTE: Divide the class into three groups and provide the instructions on
how to accomplish the task.

Note: 8 minutes to accomplish the task

4 minutes to present output/performance
3 minutes to give the rating and comments

Rubric

Directions:
Group A - On a manila paper, write a paragraph with at least five
sentences persuading others on the importance of
proper handling of measuring instruments to avoid damage
and clean it before and after using .

Group B – Classify tools according to their uses. Present it in a rap.

Group C - Make a poster that indicates functional and non-
functional, present and explain the poster.

VII. Learning Enablement REFLECT and POST. Research about the 5 s and its meaning and uses.
(2 minutes)

Reflection (DepED Order No. 42, s. 2016)

A. No. of learners who earned 80% in the evaluation

 B. No. of learners who require additional activities for remediation
C. Did the remedial lessons work?
D. No. of learners who have caught up with the lesson
E. No. of learners who continue to require remediation
F. Which of my learning strategies worked well? Why did these work?
G. What difficulties did I encounter which my principal or supervisor can help me solve?

Prepared by

FLOREMAE L. PUNAY
Teacher I
Paypay National High School, Paypay District I

Reviewed: Verified:

MA. CHONA B. REDOBLE, Ed.D. MARY ANN P. FLORES, Ed.D.

Education Program Supervisor-English Chief, Curriculum Implementation Division

Recommending Approval:

LEAH B. APAO, Ed.D., CESE

Assistant Schools Division Superintendent

Approved:

MARILYN S. ANDALES, Ed.D., CESO V

Schools Division Superintendent