MEK Replies-1

Mulla Ebrahimji Karimbhoy responds to technical queries from the Tarbela 4JV project regarding door specifications. MJK provides clarification on door locking mechanisms, bracing and fireproofing details, and confirms door sizes will be verified on site before manufacturing. MJK recommends aluminum doors with textured glass for washrooms and confirms an SS mesh will be used for a louvered door instead of sheet metal. MJK offers to visit the site to verify all door requirements and sizes.

Uploaded by

mohammedpetiwala

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

29 views2 pages

MEK Replies-1

Uploaded by

mohammedpetiwala

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 2

Mulla Ebrahimji Karimbhoy

IMPORTER*MANUFACTURER*EXPORTER

Ref: 61/TAR-173/MEK-2018 Date: 9-FEB-2018

To,
Project Manager
Tarbela 4th Extension Hydropower Project
Site Office, Tarbela, Pakistan

SUBJECT: REPLY TO TECHNICAL QUERIES TAR4-323118-18-120-CV-WK03-01269

S/N QUERY FROM TARBELA 4JV REPLY FROM MEK

1 D1 - NOTE-A 1-Please provide one side door OK
locking and both sides door handles for all
doors
2 D1 - NOTE-A 2- Please mention the qty. of Qty. shall be as per your order, plz confirm order
each door type qty. for each door type
3 D1 - NOTE-B Details of bracing not provided, MS Flat Bars for Bracings 38mm x 3mm ,
also details and configuration of bracing as MS Angle 38mm x 38mm x 4mm for Framing
per TAR-360-0011-01 MS Sheets 1.2mm on Top
4 D1 - NOTE-C Provide Fire Proofing Details -- Fire Insulation 120-D Rock Wool BS EN 1364-4
Infilling Material
-- Fire Retardant Paint Coat FRC-10/60 Color:
RAL K11 Classic GREY
5 D1 - Height for D-1 only to be confirmed All door opening sizes shall be physically
from available opening size measured at site before manufacturing is
started as per our standard procedure
6 D4 – MS Door for washrooms are not Aluminum doors with textured glass panels shall
preferred be manufactured for washrooms, 2mm
Aluminium Door Frame and Border AA 6063
Confirming to ASTM B -221
8mm Double Tempered Textured Glass

OFFICE: - SERAI ROAD, KARACHI-74000

SHOW ROOM: - 11-AMBER CASTLE, PECHS, BLOCK-6, SHARE FAISAL, KARACHI-75400
TEL: 021-32410711, 021-34530931~32 WEB: www.mek.com.pk Email: [email protected]
Mulla Ebrahimji Karimbhoy
IMPORTER*MANUFACTURER*EXPORTER

Ref: 61/TAR-173/MEK-2018 Date: 9-FEB-2018

7 D6 – This door is not required OK

8 D7 – This door is not required OK, plz confirm order qty. for each door type
9 D9 – This is a louvered door, the MS sheet is Ok, SS mesh shall be installed at the back of
not required, instead provide on SS mesh louvers

We shall visit the site to verify all sizes and door requirements before manufacturing the doors
as per our standard procedure. Should you required any further clarifications, please do not hesitate to
contact the undersigned.

Sincerely,

Muhammad Abbas

OFFICE: - SERAI ROAD, KARACHI-74000

SHOW ROOM: - 11-AMBER CASTLE, PECHS, BLOCK-6, SHARE FAISAL, KARACHI-75400
TEL: 021-32410711, 021-34530931~32 WEB: www.mek.com.pk Email: [email protected]