Scribd Logo
Upload

Welcome to Scribd!

  • 28 views

    Calcul Coalescer L-L

    Uploaded by

    Chitu Ionut-Laurentiu
    This document provides calculations and input data for sizing a coalescer unit. It specifies parameters like coalescer volume, liquid flow rates, minimum droplet diameter, viscosities and densities. Based on the input, it calculates the required coalescer width, surface area and actual volume. The minimum droplet size that can be achieved with the calculated thickness is also reported.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    Calcul Coalescer L-L

    Uploaded by

    Chitu Ionut-Laurentiu
    28 views4 pages
    This document provides calculations and input data for sizing a coalescer unit. It specifies parameters like coalescer volume, liquid flow rates, minimum droplet diameter, viscosities and densities. Based on the input, it calculates the required coalescer width, surface area and actual volume. The minimum droplet size that can be achieved with the calculated thickness is also reported.

    Original Description:

    calcul coalescer L-L

    Original Title

    calcul coalescer L-L

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides calculations and input data for sizing a coalescer unit. It specifies parameters like coalescer volume, liquid flow rates, minimum droplet diameter, viscosities and densities. Based on the input, it calculates the required coalescer width, surface area and actual volume. The minimum droplet size that can be achieved with the calculated thickness is also reported.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    28 views4 pages

    Calcul Coalescer L-L

    Uploaded by

    Chitu Ionut-Laurentiu
    This document provides calculations and input data for sizing a coalescer unit. It specifies parameters like coalescer volume, liquid flow rates, minimum droplet diameter, viscosities and densities. Based on the input, it calculates the required coalescer width, surface area and actual volume. The minimum droplet size that can be achieved with the calculated thickness is also reported.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    You are on page 1of 4

    SOT6 Ø2200

    DATE INTRARE calculations


    U.M. input data
    Vc [ft3] 67.46 Coalescer volume
    C1 - 164 for Plate -Pack w/horizontal sheets
    Q [US GPM] 25.18 Liquid/Liquid emulsion flow
    h [inch] 0.5 Corrugated plate spacing or structured packing crimp height
    d [micrones] 40 Minimum droplet diameter,
    μ [cP] 6.9 Continuos phase viscozity
    ΔS.G. kgf/m3 0.13 Specific gravity diference between the continuos and dispersed phase
    γoil kgf/m 3
    0.87 Specific gravity for oil
    γwater kgf/m3 1.006 Specific gravity for water
    ID [mm] 2176 Internal vesssel diameter
    hd [mm] 1760 oil overflow height
    hmin [mm] 310 Minimum avaialable height from bottom of vessel
    Ad ft2
    30.19 Available area for coalescer
    Wd ft 2.23
    Consideratii:
    Scop: separare titei emulsionat din apa
    Faza dispersata este considerata a fi 50% din faza continua
    Total debit: 5.72 m3/h 25.18 GPM
    Faza continua: titei 2.86 m /h
    3
    12.59 GPM
    Faza dispersata : apa 2.86 m /h
    3
    12.59 GPM

    W= 2.23 ft se alege latimea coalescerului 0.8 m


    0.68 m

    Actual coalescer volume: 2.24 m3


    sau 79.24 ft3
    Min drop size @ Actual thickness 36.9 μm
    SOT6 Ø2200
    DATE INTRARE
    U.M.
    Vc [ft3] 17.38 Coalescer volume
    C1 - 164 for Plate -Pack w/horizontal sheets
    Q [US GPM] 12.59 Liquid/Liquid emulsion flow
    h [inch] 0.5 Corrugated plate spacing or structured packing crimp height
    d [micrones] 15 Minimum droplet diameter,
    μ [cP] 0.5 Continuos phase viscozity
    ΔS.G. kgf/m3 0.13 Specific gravity diference between the continuos and dispersed p
    γoil kgf/m 3
    0.87 Specific gravity for oil
    γwater kgf/m3 1.006 Specific gravity for water
    ID [mm] 2176 Internal vesssel diameter
    hd [mm] 1760 oil overflow height
    hmin [mm] 310 Minimum avaialable height from bottom of vessel

    Consideratii:
    Scop: separare apa emulsionata din titei
    Faza dispersata este considerata a fi 1% din faza continua
    Total debit: 2.86 m3/h 12.5922 GPM
    Faza continua: apa 2.83 m /h
    3
    12.46628 GPM
    Faza dispersata : titei 0.03 m3/h 0.125922 GPM

    W= se alege latimea coalescerului 2 ft


    Suprafata necesara: 8.690 ft2 0.807334 m2 rezulta inaltimea:
    Actual coalescer volume: 0.521 m3
    sau 18.406 ft3
    Min drop size @ Actual thickness 14.6 μm
    calculations
    input data

    d packing crimp height

    e continuos and dispersed phase

    om of vessel

    rezulta inaltimea: 0.5 m (suprafata efect.)= 0.855 m2

    You might also like