Sandvik RD314B TS2-137 - 01

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

SANDVIK RD314B

HYDRAULIC
ROCK DRILL TECHNICAL SPECIFICATION

Sandvik RD314B high-frequency hydraulic rock drill is


designed for bolting on Sandvik DS411, DS511, DS211L-V
and DD211L-V rock reinforcement rigs. Sandvik RD314 is
primarily used in electrically-controlled Sandvik rigs.

Sandvik RD314B is a compact, robust and universal hydraulic


percussive rock drill. It is known for its hydraulic efficiency and
high penetration rate.

Sandvik RD314B has excellent serviceability through modular


construction and visual wear indicators. Robustness is achieved
by reducing pressurized seams (one single body) between the
functional modules.

1. SANDVIK MINING / TS2-137:01/ENG


SANDVIK RD314B ROCK DRILL TECHNICAL SPECIFICATION

MAIN SPECIFICATIONS
Hole diameter bolting 33 - 43 mm 1”5/16 - 1”23/32

Power class 14 kW A

Percussion rate 110 Hz


C
Operating pressure
B
Percussion 120 - 160 bar
Rotation (max) 175 bar

Rotation motor type OMS 100

Drill steels R32 - HEX25 - R25

R32 (female)
Shanks
R32 (male short, only for bolting)
E
Weight 115 kg 253.5 lb D

ROTATION MECHANISM
Motor Orbit type

Motor type 1 OMS100 DIMENSIONS

Torque (at 175 bar) 340 Nm A 573 mm 22.5 in

B 352 mm 13.8 in
Rotation speed 0 - 530 rpm
C 199 mm 7.8 in
Flow (at max speed) 75 l/min
D 116 mm 4.6 in

E 211 mm 8.3 in
ACCUMULATORS
Accumulator gas Nitrogen N2
SHANK LUBRICATION
High pressure (HP) 40 bar
Air flow 150 - 250 Nl/min
Low pressure (LP) 4 bar
Pressure 4 - 5 bar
Filling valve Vg8 DIN7756
Oil consumption 100 - 200 g/h

OIL RECOMMENDATION
Oil operating temperature +40°C up to +60°C

See Sandvik drill rigs lubricant


Oil recommendation
recommendation for detailed information
© Sandvik Mining 2014 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries.

OPTION
Special tools for RD314 / Complete set, Spec sheet TS2-118

Special tools for RD314 / Field tools set, Spec sheet TS2-119

DISTRIBUTOR:

Sandvik Mining reserves the right to make changes to the information


on this data sheet without prior notification to users. Please contact a
Sandvik representative for clarification on specifications and options. www.mining.sandvik.com

2. SANDVIK MINING / TS2-137:01/ENG

You might also like