0% found this document useful (0 votes)
397 views8 pages

Horizontal Adjustable Carriers: Minimum Chase Requirements For Standard Wall Installation

This document provides the minimum chase requirements for standard wall installations of Zurn horizontal and vertical adjustable carriers. It specifies the dimensional data in inches and millimeters for single and double carrier installations in both metal stud walls and block walls. Clearances are provided for the carriers, including the required spacing between units to allow for vertical and horizontal adjustments during installation.

Uploaded by

wael hassan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
397 views8 pages

Horizontal Adjustable Carriers: Minimum Chase Requirements For Standard Wall Installation

This document provides the minimum chase requirements for standard wall installations of Zurn horizontal and vertical adjustable carriers. It specifies the dimensional data in inches and millimeters for single and double carrier installations in both metal stud walls and block walls. Clearances are provided for the carriers, including the required spacing between units to allow for vertical and horizontal adjustments during installation.

Uploaded by

wael hassan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

Minimum Chase Requirements for

Standard Wall Installation

Dimensional Data (inches and [mm]) are Subject to Manufacturing Tolerances and Change Without Notice

Horizontal Adjustable Carriers

Z1201-N4 SINGLE IN METAL STUD WALL Z1201-N4-F SINGLE IN METAL STUD WALL

613
16 9
616
[172.7] [166.8]
4 4
[101.6] [101.6] 4
[101.6]

419
32
438
[117.1] [111.1]

Z1201-ND4 DOUBLE IN BLOCK WALL Z1201-ND4 DOUBLE IN METAL STUD WALL

4 7 4
3 9 3 932
1532 [101.6] [101.6]
[76.2] [76.2] [234.2]
[388.1]
758 419
32
[194.1] [117.1]

Z1201-N4 SINGLE IN BLOCK WALL Z1201-N4-F SINGLE IN BLOCK WALL


3
3 1258 3 [76.2]
[76.2] [321.0] [76.2] 941 3
[235.0] [76.2]
758
[194.1]
1
716
[179.4]

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov


ADVERTENCIA: Cáncer y daño reproductivo - www.P65Warnings.ca.gov
AVERTISSEMENT: Cancer et effets néfastes sur la reproduction - www.P65Warnings.ca.gov
Zurn Industries, LLC | Specification Drainage Operation Rev. M
1801 Pittsburgh Avenue, Erie, PA U.S.A. 16502 · Ph. 855-663-9876, Fax 814-454-7929
Date: 10/27/2020
In Canada | Zurn Industries Limited
C.N. No. 143148
7900 Goreway Drive, Unit 10, Brampton, Ontario L6T 5W6 · Ph. 877-892-5216
Prod. | Form. No. C10
www.zurn.com Page 1 of 8
Minimum Chase Requirements for
Standard Wall Installation

Dimensional Data (inches and [mm]) are Subject to Manufacturing Tolerances and Change Without Notice

Vertical Adjustable Carriers


Z1202-ND4 DOUBLE IN METAL STUD WALL Z1202-ND4 DOUBLE IN BLOCK WALL

4 7 4 3 9 3
932 1532
[101.6] [234.2] [101.6] [76.2] [388.1] [76.2] 21
419 732
32
[117.1] [194.1]

Z1202-N4 SINGLE IN METAL STUD WALL Z1202-N4 SINGLE IN BLOCK WALL

613
16 3 1258 3
[172.7] 4 [76.2] [76.2]
4 [321.0]
[101.6] [101.6]
21
732
419
32
[194.1]
[117.1]

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov


ADVERTENCIA: Cáncer y daño reproductivo - www.P65Warnings.ca.gov
AVERTISSEMENT: Cancer et effets néfastes sur la reproduction - www.P65Warnings.ca.gov
Zurn Industries, LLC | Specification Drainage Operation Rev. M
1801 Pittsburgh Avenue, Erie, PA U.S.A. 16502 · Ph. 855-663-9876, Fax 814-454-7929
Date: 10/27/2020
In Canada | Zurn Industries Limited
C.N. No. 143148
7900 Goreway Drive, Unit 10, Brampton, Ontario L6T 5W6 · Ph. 877-892-5216
Prod. | Form. No. C10
www.zurn.com Page 2 of 8
Minimum Chase Requirements for
T
Standard Wall Installation

Dimensional Data (inches and [mm]) are Subject to Manufacturing Tolerances and Change Without Notice

Horizontal Adjustable Carriers


Z1203-ND4 DOUBLE IN METAL STUD WALL Z1203-N4 SINGLE IN METAL STUD WALL

4 9 4 4 7 4
[101.6] [228.6] [101.6] [101.6] [177.8] [101.6]
1
42
1
42
[114.3]
[114.3]

Z1203-ND4 DOUBLE IN BLOCK WALL Z1203-N4 SINGLE IN BLOCK WALL

3 16 3 3 1
112 3
[76.2] [406.4] [76.3] [76.2] [76.2]
[292.1]
8 8
[203.2] [203.2]

Zurn Industries, LLC | Specification Drainage Operation Rev. M


1801 Pittsburgh Avenue, Erie, PA U.S.A. 16502 · Ph. 855-663-9876, Fax 814-454-7929
Date: 10/27/2020
In Canada | Zurn Industries Limited
C.N. No. 143148
7900 Goreway Drive, Unit 10, Brampton, Ontario L6T 5W6 · Ph. 877-892-5216
Prod. | Form. No. C10
www.zurn.com Page 3 of 8
Minimum Chase Requirements for
Standard Wall Installation

Dimensional Data (inches and [mm]) are Subject to Manufacturing Tolerances and Change Without Notice

Vertical Adjustable Carriers


Z1204-N4 SINGLE IN METAL STUD WALL Z1204-ND4 DOUBLE IN METAL STUD WALL

4 9 4
4 63
4
4
[101.6] [101.6] [101.6] [228.6] [101.6]
[171.5] 421
1
42 [114.3]
[114.3]

Z1204-N4 SINGLE IN BLOCK WALL Z1204-ND4 DOUBLE IN BLOCK WALL

3 1 3 3 16 3
122
[76.2] [76.2] [76.2] [406.4] [76.2]
[317.5]
8 8
[203.2] [203.2]

Zurn Industries, LLC | Specification Drainage Operation Rev. M


1801 Pittsburgh Avenue, Erie, PA U.S.A. 16502 · Ph. 855-663-9876, Fax 814-454-7929
Date: 10/27/2020
In Canada | Zurn Industries Limited
C.N. No. 143148
7900 Goreway Drive, Unit 10, Brampton, Ontario L6T 5W6 · Ph. 877-892-5216
Prod. | Form. No. C10
www.zurn.com Page 4 of 8
Minimum Chase Requirements for
Standard Wall Installation

Dimensional Data (inches and [mm]) are Subject to Manufacturing Tolerances and Change Without Notice

Horizontal Adjustable Carriers


Z1203-N4 PRE-FABRICATED INSTALLATION Z1208-N4 SINGLE IN BLOCK WALL
SINGLE IN BLOCK WALL
3 10 7 3
16
[76.2] [265.1] [76.2]
3 111 3 1
2 52
[76.2] [292.1] [76.2]
8 [139.7]
[203.2]

Z1208-N4 SINGLE IN STUD WALL Z1209-N4 SINGLE IN BLOCK WALL

37
16 3
[87.3] 3 94 3
4 4 [76.2] [247.7] [76.2]
[101.6] [101.6] 55
3 8
14 [142.9]
[44.5]

Z1209-N4 SINGLE IN STUD WALL

5
28
[66.7]
4 [101.6] 4 [101.6]

Zurn Industries, LLC | Specification Drainage Operation Rev. M


1801 Pittsburgh Avenue, Erie, PA U.S.A. 16502 · Ph. 855-663-9876, Fax 814-454-7929
Date: 10/27/2020
In Canada | Zurn Industries Limited
C.N. No. 143148
7900 Goreway Drive, Unit 10, Brampton, Ontario L6T 5W6 · Ph. 877-892-5216
Prod. | Form. No. C10
www.zurn.com Page 5 of 8
Minimum Chase Requirements for
Standard Wall Installation

Dimensional Data (inches and [mm]) are Subject to Manufacturing Tolerances and Change Without Notice

Vertical Adjustable Carriers


Z1203-ND4 PRE-FABRICATED INSTALLATION Z1209-ND4 DOUBLE IN STUD WALL
DOUBLE IN BLOCK WALL

1
48
3 16 3 4 [104.8] 4
[76.2] [406.4] [76.3] [101.6] [101.6]
8
[203.2]

Z1209-ND4 DOUBLE IN BLOCK WALL

3 1
118 3
[76.2] [282.6] [76.2]
9
516
[141.3]

Zurn Industries, LLC | Specification Drainage Operation Rev. M


1801 Pittsburgh Avenue, Erie, PA U.S.A. 16502 · Ph. 855-663-9876, Fax 814-454-7929
Date: 10/27/2020
In Canada | Zurn Industries Limited
C.N. No. 143148
7900 Goreway Drive, Unit 10, Brampton, Ontario L6T 5W6 · Ph. 877-892-5216
Prod. | Form. No. C10
www.zurn.com Page 6 of 8
Minimum Chase Requirements for
Standard Wall Installation

Dimensional Data (inches and [mm]) are Subject to Manufacturing Tolerances and Change Without Notice

Hanger Plate Carriers


Z1221 FOR LAVATORY Z1221 FOR LAVATORY W/ CLEARANCE FOR WASTE PIPE

1 5
32 1
1 [127]
[88.9] 2
2 [12.7]
[12.7] 1
1 2
2 [12.7] 117
[12.7] 117
32
32
[39.0]
[39.0]

Z1222 FOR URINAL Z1222 FOR URINAL W/ CLEARANCE FOR WASTE PIPE

31
2 5
[88.9] 1 [127.0] 1
2 2
1 [12.7] 1 [12.7]
2 2
[12.7] 117
32
[12.7]
117
32
[39.0] [39.0]

Zurn Industries, LLC | Specification Drainage Operation Rev. M


1801 Pittsburgh Avenue, Erie, PA U.S.A. 16502 · Ph. 855-663-9876, Fax 814-454-7929
Date: 10/27/2020
In Canada | Zurn Industries Limited
C.N. No. 143148
7900 Goreway Drive, Unit 10, Brampton, Ontario L6T 5W6 · Ph. 877-892-5216
Prod. | Form. No. C10
www.zurn.com Page 7 of 8
Minimum Chase Requirements for
Standard Wall Installation

Dimensional Data (inches and [mm]) are Subject to Manufacturing Tolerances and Change Without Notice

Arm Lavatory Carriers


Z1231 CONCEALED ARM
Z1231 CONCEALED ARM Z1231EZ CONCEALED ARM
W/ CLEARANCE FOR WASTE PIPE

7
316 319
32 [91.3] 1 415
1 16
[87.3] 2 2 [125.4]
[12.7] 1
1 [12.7] 1 2
2 1
[12.7]
13
116
2 113
16 2 113
[12.7]
[12.7] 16
[46.0] [46.0] [12.7]
[46.0]

Z1231EZ-WL CONCEALED ARM Z1236 EXPOSED ARM


Z1236 EXPOSED ARM
W/ CLEARANCE FOR WASTE PIPE W/ CLEARANCE FOR WASTE PIPE

7
319
316 415
1 32 [91.3] 16
[87.3] 1 [125.4] 1
2 1 2
[12.7] 2 1 1 2
2 [12.7] [12.7]
[12.7] 113 2 113
113
16
[12.7] 16 [12.7] 16
[46.0] [46.0]
[46.0]

Zurn Industries, LLC | Specification Drainage Operation Rev. M


1801 Pittsburgh Avenue, Erie, PA U.S.A. 16502 · Ph. 855-663-9876, Fax 814-454-7929
Date: 10/27/2020
In Canada | Zurn Industries Limited
C.N. No. 143148
7900 Goreway Drive, Unit 10, Brampton, Ontario L6T 5W6 · Ph. 877-892-5216
Prod. | Form. No. C10
www.zurn.com Page 8 of 8

You might also like