ISO 9001 CERTIFIED

www.liteputer.com.tw

DX-610/626
6CH. DMX DIMMER PACK

Lite-Puter Enterprise Co., Ltd.

Lite-Puter DX-610/626 [EUM-E]

ISO 9001 CERTIFIED

www.liteputer.com.tw

INDEX
Safety Introductions ................. ........... 2
Chapter 1.Introduction of DX-610/626
1-1 1-2 1-3 1-4 1-5 1-6 Feature................................................................ 3 Brief device introduction................................... 3 Specification ...................................................... 3 Front panel ......................................................... 4 Output terminal board / Sockets panel ............ 4 Wiring Diagram .................................................. 6

Chapter 2Operation
2-1 2-2 2-3 2-4 2-5 2-6 2-7 2-8 Standard DMX512 Signal................................... 6 DMX start address setting................................. 6 Dimming/Switching setting............................... 7 Warm up setting (06%)................................... 7 Channel output status preview......................... 7 Manual dimming ................................................ 8 Display the dimming value of DMX channel, internal temperature.......................................... 8 DMX status & DMX address .............................. 8

Lite-Puter DX-610/626 [EUM-E]

ISO 9001 CERTIFIED

www.liteputer.com.tw

SAFETY INTRODUCTIONS
Please note the load power
Please refer to the data we suggest to ensure the normal total working hours of DX-610/626 1. If DX-610/626 is installed in a rack, please make sure the rack is airy. Otherwise the machine will become over-heat and result in the mis-function. DX-610: the max. output of each channel if 10A: For testing (DO Not over 30 minutes) DX-626: the max. output of each channel if 20A: For testing (DO Not over 30 minutes) 3. DX-610: the output of each channel is8A: For several hours use (Theaters, Stages) DX-626: the output of each channel is16A: For several hours use (Theaters, Stages) 4. DX-610: the output of each channel is 8A: Can work for the whole year without switching off (Hotels, Restaurants, Buildings) DX-626: the output of each channel is 12A: Can work for the whole year without switching off (Hotels, Restaurants, Buildings)

2.

Working Environment
1. Temperature Under 35C 2. If the machine is installed in a rack, then the temperature inside the rack must be under 45C 3. Humidity40% --- 80%

Suggested Dimming Lights

Lite-Puter DX-610/626 [EUM-E]

ISO 9001 CERTIFIED

www.liteputer.com.tw

Chapter 1.
1-1 Feature

Introductions of DX-610/626

6 dimming channels. Auto tracking of frequency and phase. Temperature control device: When the temperature is over 35the fan will start automatically. Auto tracking of frequency: Enables stable dimming output in different frequencies. Testing function: Can do test without connecting a console. Warm-up function to protect the loads. (Warm-up setting 0---6.0%)

1-2 Brief device introductions

1-3 Specification
Power Output AC100-240V, 45-63Hz, 34W, 12W DX-610: Maximal output is 10A each channel DX-626: Maximal output is 20A each channel (Please refer to the user manual) DMX signal output/ input DMX signal connector Analog signal power input Analog input channel DMX512/ 1990 XLR 5Pin, RJ11-6p4c phone jack DC 0-10V 9 channels PIN 1~6( CH1~6, PIN 7(NC, PIN 8(V+12V OUT,PIN 9(GND Analog signal connector D-Type Plug 9Pin(F)

Lite-Puter DX-610/626 [EUM-E]

ISO 9001 CERTIFIED

www.liteputer.com.tw

Dimension Location Weight 1-4 Front panel

482(W) x 88(H) x 300(D)mm 19" 2U standard rack 8Kg

4
CH1 CH2 CH3 CH4 CH5 CH6

2
DMX OUT

6CH. DMX DIMMER PACK

DX-610/626
ANALOG IN 0~10VDC

PUSH

1 2 3

4 5 6

PIN1~6:CH1~CH6 PIN7:NC PIN8:V+12V OUT PIN9:GND

10 9 8 7 6 5 4 3 2

10 9 8 7 6 5 4 3 2

10 9 8 7 6 5 4 3 2

ON FNC DMX

L
1:V+12V 2:Data+ 3:Data4:GND

T
4 3 2 1 4 3 2 1

DMX IN

CONTROL OFF

7
(1) Power on/ off switch

8
(5) (6) (7)

6
Function Key

(2) DMX OUT/ IN (5 pin) (3) DMX IN (RJ11, phone jack)

Dimming VR of Channel 1- 6 No fuse breaker (Channel 1-3)

(4) LED display/ function keys

(8) No fuse breaker (Channel 4-6)

1-5 Output terminal board / Sockets panel

TERMINAL TYPE

10 11

12

13 (12) Power input terminal board. (DX-610: 20A Single phase; DX-626: 40A Single phase)

(9) DMX connector (RJ11, phone jack)

(10) DMX IN

(XLR-3 pin)

(13) Output terminal board (10A each channel, External power no fuse
4 Lite-Puter DX-610/626 [EUM-E]

ISO 9001 CERTIFIED

www.liteputer.com.tw

(11) DMX OUT (XLR-3 pin)

breaker is necessary when mounting.)

AMERICAN TYPE
Output sockets (DX-610: 10A each channel; DX-626: 15A each channel,External power no fuse breaker is necessary when mounting.)

SCHUKO TYPE
Output sockets (DX-610: 10A each channel; DX-626: 16A each channel,External power no fuse breaker is necessary when mounting.)

1-6 Wiring diagram

ISO 9001 CERTIFIED

www.liteputer.com.tw

3 PHASES 4 WIRES N THE BEST WIRING DIAGRAM R S T

E N V1 V2 V3

SINGLE PHASES 2 WIRES

N V

E N V1 V2 V3

PS.:

There are 3 PHASES 3 WIRES and SINGEL PHASE 3 WIRES as option.

Chapter 2.
2-1

Operation

Standard DMX512 Signal

This point flashing when receiving DMX

2-2

DMX start address setting

STEP-1 holdingDMX, pressorto find the start address.

: move 1 number forward : up to Channel 512

: move 1 number backward :down to Channel 1

Lite-Puter DX-610/626 [EUM-E]

ISO 9001 CERTIFIED

www.liteputer.com.tw

DX-626 is a 6 channel dimmer pack so when setting this unit: 1 as C.001, the output is from Channel 1 Channel 6. 2 as C.007, the output is from Channel 7 Channel 12. 3 It is allowed for setting more than 1 piece of DX-626 at the same start address.

2-3

Dimming/Switching setting

STEP-1 pressDMXkey into DMX status STEP-2 press and hold theFNCkey for 3 sec. Default settingall channel are dimming mode

STEP-3 pressFNCkey to select channel STEP-4 pressorto select dimming mode or switching mode

(dimming)

(Switching)

2-4

warm up setting (06%)

STEP-1 pressFNCkey

STEP-2 pressFNCkey to select the setting channel, EX :select channel 1 STEP-3 press,key to adjust Channel 1 set on 6% for warm up

2-5

Channel output status preview

STEP-1 Enter to DMX status and pressDMXkey STEP-2 pressorto preview

Lite-Puter DX-610/626 [EUM-E]

ISO 9001 CERTIFIED

www.liteputer.com.tw

2-6

Manual dimming

STEP-1 PushVR1-VR6to do the prompt dimming output of individual channel. When there is another signal inputting from a console, it will take the higher value as the output.

2-7

Display the dimming value of DMX channel,

internal temperature.

PressLto display the dimming value of DMX channel. PressTto display the internal temperature.

2-8

DMX status & DMX address

a.pressDMXto DMX status b.10 minutes unused of unit, the DMX will activate to DMX status

Lite-Puter DX-610/626 [EUM-E]