TATA Trucks Tractor Trailers Specifications

Product / Model TATA ULTRA 3021.
S BS6
Weight
Grosss Combination Weight (kg) 30000
ENGINE
Model TATA 5.0L Turbotronn (CRDI - TCIC)
Maximum Power (kW) 153 kW @ 2000 RPM
Maximum Torque (Nm) 850 Nm @ 1100 - 1600 RPM
No. of Cylinders, Displacement (cc) 5000
Emission Compliance BSVI
Transmission
Gearbox Model & Type G750 6F + 1R Manual Synchromesh
Gear Shift Cable
Gear Ratio (FGR/TGR) 8.47 / 1
Push type Single Plate Dry Friction Organic
Clutch Type
Lining
Clutch Diameter (mm) 380
Axle
Front Axle Model Type TATA Heavy Duty 6T Reverse Elliot Type
TATA 10.2T Banjo Type Single Reduction

Rear Axle Model Type
RA109RR
Dimensions
Body Size/Options 30000 kg
Wheel Base (mm) 3320
Car Carriers | LPG Bullets | E-Commerce |

Application
FMCG
Frame & Suspension

Chassis Type Ladder Type, Heavy Duty Frame
Frame Section (DxWxT) (mm) 250 x 68 x 7
Front Suspension
Rear Suspension
Tyres
295/90 R20 Tube Tyres or 275/80 R22.5
Tyre Size & Construction
Tubeless Tyres
Wheel Rims & Tyres 30T GCW

Fuel Tank & Exhaust
Fuel Tank HDPE
Fuel Tank Filing Capacity (ltr) 365 & 557 (365 + 192)
Emmission Control EGR + DOC + DPF + SCR + AMOX
Performance
Maximum Gradeability %
Maximum Geared Speed
Turning Circle Diameter (TDC)*
Cabin
Cabin Type Ultra Sleeper Cabin
Ventilation Type Blower and Air Conditioning
TATA SIGNA 4018.S/LPS 4018 TATA SIGNA 4625.S
39500 45500
Cummins ISBe 5.6L (CRDI - TCIC) Cummins ISBe 6.7L (CRDI - TCIC)
139 kW @ 2300 RPM 186 kW @ 2300 RPM
850 Nm @ 1000 - 1600 RPM 950 Nm @ 1000 - 1800 RPM
5600 6700
BSVI BSVI
G950 6F + 1R Manual Synchromesh G1150 8F +1C + 1R Manual Synchromesh

Linkage Linkage
9.36 / 1 9.36/1 (for 6 Speed) & 9.13/1 (for 9 Speed)
Push type Single Plate Dry Friction Organic Push type Single Plate Dry Friction Organic
Lining Lining as per applicable GB
380 430
TATA Heavy Duty 7T Reverse Elliot Type 7T Reverse Elliot Twin Steer
11.5T Banjo Type Single Reduction 11.5T Banjo Type Single Reduction
RA110LD RA110LD
Skeletal :7 m | 12 m | Rigid Axle | Lift Axle

Skeletal : 7m | 12m | Rigid Axle | Lift Axle Flat Bed :7m | 12m | Rigid Axle | Lift Axle
Flat Bed : 7m | 12m | Rigid Axle | Lift Axle Side Wall : 9 m (3-4 ft SW) | 10 m (4-5 ft
SW)
3320 3320
Cement | Flyash / Clinker | Limestones |
Cement | LPG Tankers | Iron Flat Sheets |
LPG/Chemical tanker Aggregates | Steel
Fly Ash | Agro | Coal Volumetric ODCs |
coil | Flats / Bars Volumetric ODCs | Agro |
Steel Coils, Bars | Marbles/Tiles
Const. Agg, Shipping containers
Ladder Type, Heavy Duty Frame Ladder Type, Heavy Duty Frame
285 x 65 x 7 285 x 65 x 7
295/90 R20 295/90 R20
39.5T GCW 45.5T GCW

HDPE HDPE
365 & 557 (365 + 192) 365 & 557 (365 + 192)
DOC + DPF + SCR + AMOX DOC + DPF + SCR + AMOX
Cowl | Signa Sleeper Cabin Signa Sleeper Cabin

Blower / AC Blower / AC
TATA SIGNA 4625.S.ESC TATA PRIMA 4625.S
45500 45500
186 kW @ 2300 RPM 186 kW @ 2300 RPM
950 Nm @ 1000 - 1800 RPM 950 Nm @ 1000 - 1800 RPM
6700 6700
BSVI BSVI
G1150 8F +1C + 1R Manual Synchromesh G1150 8F +1C + 1R Manual Synchromesh

Linkage Linkage
9.13 / 1 9.13 / 1
Lining Lining as per applicable GB
430 430
TATA Heavy Duty 7T Reverse Elliot Type 7T Reverse Elliot Twin Steer
11.5T Banjo Type Single Reduction 11.5T Banjo Type Single Reduction
RA110LD RA110LD
Skeletal :7 m | 12 m | Rigid Axle | Lift Axle Skeletal :7 m | 12 m |Rigid Axle | Lift Axle
Flat Bed :7m | 12m | Rigid Axle | Lift Axle Flat Bed :7m | 12m | Rigid Axle | Lift Axle
Side Wall : 9 m (3-4 ft SW) | 10 m (4-5 ft Side Wall : 9 m (3-4 ft SW) | 10 m (4-5 ft
SW) SW)
3320 3400
Cement | Flyash / Clinker | Limestones | Cement | Flyash / Clinker | Limestones |
LPG/Chemical tanker Aggregates | Steel LPG/Chemical tanker | Aggregates | Steel
coil | Flats / Bars Volumetric ODCs | Agro | coil | Flats / Bars | Volumetric ODCs | Agro
Const. Agg, Shipping containers | Const. Agg, Shipping containers
285 x 65 x 7 285 x 65 x 7
Parabolic Leaf Spring Parabolic Leaf Spring
Semi elliptical multi leaf spring Bogie/ Bell Crank Suspension
295/90 R20 295/90 R20
45.5T GCW 45.5T GCW

HDPE HDPE
365 365 & 557 (365 + 192)
Signa Sleeper Cabin Standard AC Cabin

Air Conditioner Air Conditioner
TATA SIGNA 5525.S 4X2 TATA SIGNA 5530.S 4x2
51,000 | 52,000 | 53,000 | 54,000 | 55,000 51,000 | 52,000 | 53,000 | 54,000 | 55,000
186 kW @ 2300 RPM 224kW @ 2300 RPM
950 Nm @ 1000 - 1800 RPM 1100 @ 1100 - 1700 RPM
6700 6700
BSVI BSVI

Linkage Linkage
9.13 / 1 9.13 / 1
Lining Lining
430 430
TATA 7T Reverse Elliot Type TATA 7T Reverse Elliot Type
11.5T Banjo Type Single Reduction

11.5T Banjo Type Single Reduction RA114
RA110LD
3320 3320
285 x 65 x 7 285 x 65 x 7
Semi elliptical multi leaf spring Semi elliptical multi leaf spring
295/90 R20 295/90 R20
Multiple GCW Nodes 51T|52T|53T|54T| Multiple GCW Nodes 51T|52T|53T|54T|

55T with appropriate trailer combinations 55T with appropriate trailer combinations
HDPE HDPE
365 365 & 557 (365 + 192)
Signa Sleeper Cabin Signa Sleeper Cabin

Blower / AC Blower / AC
TATA SIGNA 5530.S 6x4 TATA PRIMA 5530.S 6x4
55000 55000
224kW @ 2300 RPM 224kW @ 2300 RPM
1100 @ 1100 - 1700 RPM 1100 @ 1100 - 1700 RPM
6700 6700
BSVI BSVI

Linkage Linkage
9.13 / 1 9.13 / 1
Lining Lining
430 430
TATA Heavy Duty 7T Reverse Elliot Type TATA Heavy Duty 7T Reverse Elliot Type
21T Banjo Type Single Reduction RA109 21T Banjo Type Single Reduction RA109
SRT Tandem SRT Tandem
Flat Bed :12m | Side Flat Bed : 12m | Side

Wall :10m (3/4 ft SW) | 10.4 m (4/5/6 ft Wall : 10 m (3/4 ft SW) | 10.4 m (4/5/6 ft
SW) | Tip SW) | Tip
Trailer : 24 | 26 | 32 | 36 m3 Bulker : Trailer : 24 | 26 | 32 | 36 m3
40 m3 | SLB : 12.2 | 12.5 m Bulker : 40 m3 | SLB : 12.2 | 12.5 m
3890 3890
Cement | Flyash | Clinker | Limestones | Cement | Flyash | Clinker | Limestones |
Agro | Steel coils, flats, bars | Marvel / Agro | Steel coils, flats, bars | Marvel /
Tiles/ Stones | ODCs | LPG/Chemical Tiles/ Stones | ODCs | LPG/Chemical
Tankers | Const. Agg. | CKDs | Coal Tankers | Const. Agg. | CKDs | Coal
285 x 65 x 7 285 x 65 x 7
Bogie / Bell Crank Suspension Bogie / Bell Crank Suspension
295/90 R20 295/90 R20
55T GCW 55T GCW

HDPE HDPE
365 & 557 (365 + 192) 365 & 557 (365 + 192)
Signa Sleeper Cabin Prima Sleeper Cabin

Blower / AC Air Conditioned
PRODUCT
Model
Type
Fully Built Solution
Weight
Grosss Combination Weight (kg)
ENGINE
Model
Maximum Power (kW)

Maximum Torque (Nm)
No. of Cylinders, Displacement (cc)
Emission Compliance
Transmission
Gearbox Model & Type
Gear Shift
Gear Ratio (FGR/TGR)
Clutch Type
Clutch Diameter (mm)
Axle
Front Axle Model Type
Rear Axle Model Type
Rear Axle Ratio
Dimensions
Body Size/Options
Wheel Base (mm)
Cabin
Body Dimensions (LxWxH)
Loading Span (ft)/ Loadbody cpc
(Cu.m)
Overall Length (mm)
Overall Width (mm)
Overall Height (mm)(CBC)
Chassis
Landing Leg
Axles
King Pin
Suspension
Tyre & Wheel Rim
Brakes
Electricals
Surface Preparation
Painting
Other Fitments
Front Overhang (mm)

Rear Overhang (mm)
Minimum Ground Clearance (mm)
Application
Chassis Frame,
Suspension & Tyres
Chassis Type
Frame Section (DxWxT) (mm)
Front Suspension
Rear Suspension
Anti Roll Bar
Brakes & Tyres

Service Brake
Parking Brake
Front Axle Brake
Rear Axle Brake
Tyre Size (Section
Width(mm)/Section Height (%)/
Construction-Rim Diameter (In))
Wheel Rims & Tyres
Steering & Cabin

Steering Type
Cabin Type
Fuel Tank &

Electricals
Fuel Tank
Fuel Tank Filing Capacity (ltr)
Emmission Control
Adblue Tank/ Filling Capacity
Voltage
Battery Capacity
Performance
Ventilation
Ventilation Type
Instrument Cluster
Advanced Driver Information
Driver Coaching (Fuel
Economy/Overspeed)
Diagnostic and Driver Promt
Feature
TRAILER (TATA 4018.S)
SKELETAL 2 AXLE TRAILER ON 4018.S BS6
7 m 2A 12TL Skeletal Trailer 12 m 2A 12TL Skeletal Trailer
39500 39500
Cummins ISBe 5.6L BS6 (CRDI - TCIC)
139 kW @ 2300 RPM

850 Nm @ 1000 - 1600 RPM
5600
BSVI
TATA G950 6F + 1R Manual Synchromesh
Linkage
9.36 / 1
Push type Single Plate Dry Friction Organic Lining
380
TATA Heavy Duty 7T Reverse Elliot Type
11.5T Banjo Type Single Reduction RA110LD
Skeletal : 7m Skeletal : 12m

3320 3320
7 163 mm x 2 590 mm 12 200 mm x 2 590 mm
23ft 6inch 40 ft
7163 12200
2590 2590
All steel welded construction. 2 nos. main longitudinal members are of high strength
lighter weight parallel flange beam running along full length of the trailer. Cross
members - rolled or folded of material IS-2062 / equivalent - are positioned at suitable
locations. 12 nos. of twist lock shall be provided to suit 1 no.-40 feet or 2 nos.–20 feet or
1 no.-20 feet ISO container at middle.
Two-speed landing leg shall be provided at the front end. Make: York 25A / equivalent
2 nos. 12T heavy duty axles shall be provided. Make TATA/ York / equivalent
2" king pin equivalent to IS: 6763 Part I provided
9 leaves heavy duty tandem axle multi leaf spring suspension with load equalizing
brackets to be provided. Make: YORK / equivalent
10 x 20 / 10R X 20 - 16 PR – 08 nos.; 7.5.0 x 20 - 08 nos.
Twin line air brake system coupled to tractor brake system. Trailer brakes are actuated
from tractor.
T 24 / T 30 brake chamber/ Spring brake actuator shall be provided on all axles. Parking
brake shall be manually actuated
24 V DC electricals include tail lamp, brake lamp and direction indicator lamps fitted at
rear end of trailer. Side marker lamps shall be provided on both sides
Trailer surface shall be shot blasted and cleaned
One coat of primer and one coat of finish paint with colour of customer's choice
Fitments of SUPD, RUPD, reflectors on both sides and rear shall be provided as per
CMVR
Transportation of Shipping Containers
Ladder Type, Heavy Duty Frame

285 x 65 x 7
295/90 R20
39.5T GCW
Cowl | Signa Sleeper Cabin
HDPE
365 & 557 (365 + 192)
DOC + DPF + SCR + AMOX
Blower / AC
FLAT BED 2 AXLE TRAILER ON 4018.S BS6
7 m 2A 12TL Flatbed Trailer 12 m 2A 12TL Flatbed Trailer
39500 39500
139 kW @ 2300 RPM

850 Nm @ 1000 - 1600 RPM
5600
BSVI
TATA G950 6F + 1R Manual Synchromesh
Linkage
9.36 / 1
380
Flat Bed : 7m Flat Bed : 12m

3320
7 163 mm x 2 590 mm 12 200 mm x 2 590 mm
23ft 6 inch 40 ft
7163 12200
2590 2590
All steel welded construction. Main longitudinal members: 2 nos. “I” section of material
IS:2062 / equivalent running along full length of the trailer. Rolled cross member of
material IS-2062 / equivalent are positioned at suitable locations. 12 nos. of twist lock
shall be provided to suit 1 no.- 40 feet or 2 nos.–20 feet or 1 no.-20 feet ISO container at
middle. Floor shall be of 3.15 mm thick chequered sheet
2 nos. 12T heavy duty axles shall be provided. Make TATA / York or equivalent
9 leaves heavy duty tandem axle multi leaf spring suspension with load equalizing
10 x 20 / 10R x 20 - 16 PR – 08 nos.; 7.5.0 x 20 - 08 nos.
from tractor.
T 24 / T 30 brake chamber / spring brake actuator shall be provided on all axles. Parking
CMVR
Steel Coils, Shipping Containers, Marble Blocks, Agri Bags, Jumbo Bags, Cement Bags
etc.

285 x 65 x 7
295/90 R20
39.5T GCW
Cowl | Signa Sleeper Cabin
HDPE
365 & 557 (365 + 192)
Blower / AC
SKELETAL 3 AXLE TRAILER ON 4625.S BS6
7 m 3A 12TL Skeletal Trailer 12 m 3A 12TL Skeletal Trailer
45500 45500
186 kW @ 2300 RPM

950 Nm @ 1000 - 1800 RPM
6700
BSVI
G1150 8F +1C + 1R Manual Synchromesh
Linkage
9.36/1 (for 6 Speed) & 9.13/1 (for 9 Speed)
Push type Single Plate Dry Friction Organic Lining as per applicable GB
430
7T Reverse Elliot Twin Steer
Skeletal : 7 m Skeletal : 12 m
3320
7 163 mm x 2 590 mm 12 200 mm x 2 590 mm
23ft 6 inch 40 ft
7163 12200
2590 2590
All steel welded construction. 2 nos. main longitudinal members are of high strength
lighter weight Parallel flange beam running along full length of the trailer. Cross
members - rolled or folded of material IS-2062 / equivalent - are positioned at suitable
locations. 12 nos. of twist lock shall be provided to suit 1 no.-40 feet or 2 nos.–20 feet or
1 no.-20 feet ISO container at middle.
3 nos. 12T heavy duty axles shall be provided. Make TATA / York / equivalent
10 leaves heavy duty tridem axle multi leaf spring suspension with load equalizing
10 x 20 / 10R x 20 - 16 PR - 12 nos.; 7.5.0 x 20 - 12 nos.
from tractor.
T 24 / T 30 brake chamber / spring brake actuator shall be provided on all axles. Parking
CMVR
Transportation of Shipping Containers

285 x 65 x 7
295/90 R20
45.5T GCW
Prima / Signa Sleeper Cabin
HDPE
365 & 557 (365 + 192)
Blower / AC
FLATBED 3 AXLE TRAILER ON 4625.S BS6
7 m 3A 12TL Flatbed Trailer 12 m 3A 12TL Flatbed Trailer
45500 45500
186 kW @ 2300 RPM

950 Nm @ 1000 - 1800 RPM
6700
BSVI
Linkage
Push type Single Plate Dry Friction Organic Lining as per applicable GB
430
Flat Bed : 7m Flat Bed : 12m

3320
7 163 mm x 2 590 mm 12 200 mm x 2 590 mm
23ft 6 inch 40 ft
7163 12200
2590 2590
material IS-2062 / equivalent are positioned at suitable locations. 12 nos. of twist lock
shall be provided to suit 1 no.- 40 feet or 2 nos.–20 feet or 1 no.-20 feet ISO container at
middle. Floor shall be of 3.15 mm thick chequered sheet
3 nos. 12T heavy duty axles shall be provided. Make TATA / York / equivalent
10 leaves heavy duty tridem axle multi leaf spring suspension with load equalizing
10 x 20 / 10R x 20 - 16 PR - 12 nos.; 7.5.0 x 20 - 12 nos.
from tractor.
T 24 / T30 brake chamber / spring brake actuator shall be provided on all axles. Parking
CMVR
Steel Coils, Shipping Containers, Marble Blocks, Agri Bags, Jumbo Bags, Cement Bags
etc.

285 x 65 x 7
295/90 R20
45.5T GCW
HDPE
365 & 557 (365 + 192)
Blower / AC
SIDEWALL 3 AXLE TRAILER ON 4625.S BS6

9 000 mm (9 m)/30 ft (3 ft) Sidewall 9 000 mm (9 m)/30 ft (4 ft) Sidewall
Trailer Trailer
45500 45500
186 kW @ 2300 RPM

950 Nm @ 1000 - 1800 RPM
6700
BSVI
Linkage
Push type Single Plate Dry Friction Organic Lining as per applic
430
3320
9150 mm x 2590 mm x 914 mm 9150 mm x 2590 mm x 1219 mm
30 ft 30 ft
9150 9150
2590 2590
914 (3ft) 1219 (4ft)
All steel welded construction. Main longitudinal members: 2 nos. “I” section of material IS:2062 / equivalent running al
2062 / equivalent are positioned at suitable locations. Floor shall be of 4 m
One set of two-speed landing leg shall be provided at the front end. Make: YORK
3 nos. 12T heavy duty axles are provided. Make: YORK / equ
2” king pin - weldon equivalent to IS: 6763 Part I provided. Make: YO
10 leaves Tridem heavy duty suspension. Make: YORK YTE 75 /
10.00 x 20 – 16 PR – 12 nos. ; 7.50 x 20 – 12 nos.
Twin line air brake system coupled to tractor brake system. Trailer brakes are actuated from tractor. T24 / T 30 brake cham
actuated
24 V DC electricals include tail lamp, brake lamp and direction indicator fitted on rear end of trailer. Red reflectors are also
2 coat primer and one coat quick dry paint as finish paint with colour of
Fitments of SUPD, RUPD, reflectors on both sides and rear shall be prov
Cement Bags, Steel Pipes, tubes & bars, Agri Bags, Jumbo bags, Tile

285 x 65 x 7
295/90 R20
45.5T GCW
HDPE
365 & 557 (365 + 192)
Blower / AC
SIDEWALL 3 AXLE TRAILER ON 4625.S BS6

10 000 mm (10 m)/32 ft (4 ft) 10 000 mm (10 m)/32 ft (5 ft)
Sidewall Trailer Sidewall Trailer
45500 45500
186 kW @ 2300 RPM

950 Nm @ 1000 - 1800 RPM
6700
BSVI
Linkage
type Single Plate Dry Friction Organic Lining as per applicable GB
430
3320
32ft, 1-inch 32ft, 1-inch
9800 9800
2590 2590
1219 (4ft) 1524 (5ft)
nos. “I” section of material IS:2062 / equivalent running along full length of the trailer. Rolled cross member of material IS-
nt are positioned at suitable locations. Floor shall be of 4 mm thick plain sheet
anding leg shall be provided at the front end. Make: YORK (YTE 25A) / equivalent
os. 12T heavy duty axles are provided. Make: YORK / equivalent
weldon equivalent to IS: 6763 Part I provided. Make: YORK / equivalent
es Tridem heavy duty suspension. Make: YORK YTE 75 / equivalent
10.00 x 20 – 16 PR – 12 nos. ; 7.50 x 20 – 12 nos.
ler brakes are actuated from tractor. T24 / T 30 brake chamber shall be provided on all axles. Parking brake shall be manually
actuated
ndicator fitted on rear end of trailer. Red reflectors are also provided. Side marker lamps are provided at each side of the trailer
and one coat quick dry paint as finish paint with colour of customer's choice
PD, RUPD, reflectors on both sides and rear shall be provided as per CMVR
ags, Steel Pipes, tubes & bars, Agri Bags, Jumbo bags, Tiles, Pet coke et

285 x 65 x 7
295/90 R20
45.5T GCW
HDPE
365 & 557 (365 + 192)
Blower / AC
FLATBED 3 AXLE TRAILER ON 5530.S Bell
Crank / Bogie BS6
10 000 mm (10 m)/32 ft (4 ft
12 m 3A 12TL Flatbed Trailer
2LA_3PS) Sidewall Trailer
45500 55000
224kW @ 2300 RPM

1100 @ 1100 - 1700 RPM
6700
BSVI
Linkage
9.13 / 1
Push type Single Plate Dry Friction Organic
Lining
430

21T Banjo Type Single Reduction RA109 SRT
Tandem
Flat Bed : 12m

3890
9800 mm x 2590 mm x 1219 mm 12200 mm x 2590 mm
32ft, 1-inch 40 ft
9800 12200
2590 2590
1219 (4ft) All steel welded construction. Main longitudinal
members: 2 nos. “I” section of material IS:2062 /
equivalent running along full length of the trailer.
Rolled cross member of material IS-2062 /
he trailer. Rolled cross member of material IS-
equivalent are positioned at suitable locations. 12
t
nos. of twist lock shall be provided to suit 1 no.-
40 feet or 2 nos.–20 feet or 1 no.-20 feet ISO
One setatofmiddle.
container two-speed landing
Floor legofshall
shall be 3.15bemm
ivalent provided at the front
thick end. Make:
chequered sheetYORK (YTE
25A) / equivalent
3 nos. 13T heavy duty axles are provided. Make:
TATA / YORK / equivalent
2” king pin - weldon equivalent to IS: 6763 Part I
provided.
10 leaves Tridem heavy duty suspension. Make:
YORK YTE 75 / equivalent
10 x 20 / 10R x 20- 16 PR - 12 nos.; 7.50 x 20 -
12 nos.
Twin line air brake system coupled to tractor
brake system. Trailer brakes are actuated from
ded on all axles. Parking brake shall be manually
tractor. T 24 / T 30 brake chamber / spring brake
actuator shall be provided on all axles. Parking
24 V DC electricals include tail lamp, brake lamp
and direction indicator fitted on rear end of trailer.
arker lamps are provided at each side of the trailer
Red reflectors are also provided. Side marker
lamps are provided at each side of the trailer
Trailer surface shall be shot blasted and cleaned.
Surface cleaned by shot blasting, 2 coat primer

and one coat quick dry paint as finish paint with
colour of customer's choice
Fitments of SUPD, RUPD, reflectors on both
sides and rear shall be provided as per CMVR
Steel Coils, Shipping Containers, Marble Blocks,

Agri Bags, Jumbo Bags, Cement Bags etc.

285 x 65 x 7
Parabolic Leaf Spring
Bogie / Bell Crank Suspension
295/90 R20
55T GCW
HDPE
365 & 557 (365 + 192)
Blower / AC
FLATBED 3 AXLE TRAILER ON 5530.S Bell Crank / Bogie BS6
12.2 m Semi Lowbed Trailer 12.5 m Semi Lowbed Trailer
55000 55000
224kW @ 2300 RPM

1100 @ 1100 - 1700 RPM
6700
BSVI
Linkage
9.13 / 1
430
21T Banjo Type Single Reduction RA109 SRT Tandem
Flat Bed : 12m Flat Bed : 12.5m

3890 3890
12200 mm x 2590 mm 12500 mm x 2590 mm
40 ft 41 ft
12200 12500
2590 2590
material IS-2062 / equivalent are positioned at suitable locations. Floor shall be of 3.15
mm thick chequered sheet
One set of two-speed landing leg shall be provided at the front end. Make: YORK (YTE
25A) / equivalent
3 nos. 13T heavy duty axles are provided. Make: TATA / YORK / equivalent
2” king pin - weldon equivalent to IS: 6763 Part I provided.
10 leaves Tridem heavy duty suspension. Make: YORK YTE 75 / equivalent
10 x 20 / 10R x 20 - 16 PR - 12 nos.; 7.50 x 20 - 12 nos.
from tractor. T 24 / T 30 brake chamber / spring brake actuator shall be provided on all
axles. Parking brake shall be manually actuated
24 V DC electricals include tail lamp, brake lamp and direction indicator fitted on rear
end of trailer. Red reflectors are also provided. Side marker lamps are provided at each
side of the trailer
Trailer surface shall be shot blasted and cleaned.
Surface cleaned by shot blasting, 2 coat primer and one coat quick dry paint as finish
paint with colour of customer's choice
CMVR
Transportation of Machines Like Excavators, Steel Coils, Marble Blocks, Agri Bags,
Jumbo Bags, Cement Bags etc.

285 x 65 x 7
295/90 R20
55T GCW
HDPE
365 & 557 (365 + 192)
Blower / AC
SIDE WALL 3 AXLE TRAILER ON 5530.S Bell Crank/ Bog
10 m/32 ft (3 ft) Sidewall Trailer 10 m/32 ft (4 ft) Sidewall Trailer
55000 55000
224kW @ 2300 RPM

1100 @ 1100 - 1700 RPM
6700
BSVI
Linkage
9.13 / 1
430
Side Wall : 10 m (3ft SW) Side Wall : 10 m (4ft SW)

3890
32 ft 32 ft
9800 9800
2590 2590
914 (3ft) 1219 (4ft)
All steel welded construction. Main longitudinal members: 2 nos. “I” section of material IS:2062 / equivalent running al
2062 / equivalent are positioned at suitable locations. Floor shall be of 4 m
One set of two-speed landing leg shall be provided at the front end. Make: YORK
3 nos. 13T heavy duty axles are provided. Make: TATA / YORK /
2” king pin - weldon equivalent to IS: 6763 Part I provide
11 leaves Tridem heavy duty suspension. Make: YORK YTE 75 /
10 x 20 / 10R x 20 - 16 PR - 12 nos.; 7.50 x 20 - 12 nos
Twin line air brake system coupled to tractor brake system. Trailer brakes are actuated from tractor. T24 / T 30 brake cham
24 V DC electricals include tail lamp, brake lamp and direction indicator fitted on rear end of trailer. Red reflectors are also
Surface cleaned by shot blasting, 2 coat primer and one coat quick dry paint as finish pain
Fitments of SUPD, RUPD, reflectors on both sides and rear shall be prov
Cement Bags, Steel Pipes, tubes & bars, Agri Bags, Jumbo bags, Tile

285 x 65 x 7
295/90 R20
55T GCW
HDPE
365 & 557 (365 + 192)
Blower / AC
DE WALL 3 AXLE TRAILER ON 5530.S Bell Crank/ Bogie BS6
10.4 m/34 ft (4 ft) Sidewall Trailer 10.4 m/34 ft (5 ft) Sidewall Trailer
55000 55000
224kW @ 2300 RPM

1100 @ 1100 - 1700 RPM
6700
BSVI
Linkage
9.13 / 1
430
Side Wall : 10.4 m (4ft SW) Side Wall : 10.4 m (5ft SW)
3890
34 ft 34 ft
10400 10400
2590 2590
1219 (4ft) 1524 (5ft)
nos. “I” section of material IS:2062 / equivalent running along full length of the trailer. Rolled cross member of material IS-
nt are positioned at suitable locations. Floor shall be of 4 mm thick plain sheet
anding leg shall be provided at the front end. Make: YORK (YTE 25A) / equivalent
3T heavy duty axles are provided. Make: TATA / YORK / equivalent
2” king pin - weldon equivalent to IS: 6763 Part I provided.
es Tridem heavy duty suspension. Make: YORK YTE 75 / equivalent
10 x 20 / 10R x 20 - 16 PR - 12 nos.; 7.50 x 20 - 12 nos.
iler brakes are actuated from tractor. T24 / T 30 brake chamber / spring brake actuator shall be provided on all axles. Parking
ndicator fitted on rear end of trailer. Red reflectors are also provided. Side marker lamps are provided at each side of the trailer
g, 2 coat primer and one coat quick dry paint as finish paint with colour of customer's choice
PD, RUPD, reflectors on both sides and rear shall be provided as per CMVR
gs, Steel Pipes, tubes & bars, Agri Bags, Jumbo bags, Tiles, Pet coke etc.

285 x 65 x 7
295/90 R20
55T GCW
HDPE
365 & 557 (365 + 192)
Blower / AC
10.4 m/34 ft (6 ft plain sheet)
Sidewall Trailer
55000
Side Wall : 10.4 m (6ft SW)
10400 mm x 2590 mm x 1829 mm
34 ft
10400
2590
1829 (6ft)
he trailer. Rolled cross member of material IS-

t
ivalent
e actuator shall be provided on all axles. Parking
arker lamps are provided at each side of the trailer
stomer's choice
PRODUCT
Model TIP TRAILER
Type TIP TRAILER 3 AX
Fully Built Solution 24m3 Tip Trailer
Weight
ENGINE
Model Cummins ISBe 6.7L
Maximum Power (kW) 186 kW @

Maximum Torque (Nm) 950 Nm @ 10
Emission Compliance BS
Transmission
Gearbox Model & Type G1150 8F +1C + 1R
Gear Shift Lin
Gear Ratio (FGR/TGR) 9.36/1 (for 6 Speed)
Clutch Type Push type Single Plate Dry Friction
Axle
Front Axle Model Type 7T Reverse E
Rear Axle Model Type 11.5T Banjo Type Sing
Rear Axle Ratio
Dimensions
Body Size/Options 24 m3
Cabin
Body Dimensions Internal (LxWxH) 6882 mm x 2400 mm x 1450 mm
Loadbody cpc (Cu.m) 24 m3

Overall Length (mm) 6882
Overall Width (mm) 2400
Overall Height (mm)(CBC) 1450
Steel YS (MPA) - 450-500 min, UT
Steel Thickness - Flr x SB x HB x
4 mm x 3 mm x 3 mm x 3
TD
Tipping Kit FE-149 (HYVA) / equivalent
Axles 3 nos. 12T heavy duty axles with manual slack adju
Suspension Tridem; MAKE - Y
King Pin 2" bolt-in type as
Landing Leg Twin-speed telescopic; Make -
Tyre & Wheel Rim 10 x 20 /10R x 20 - 16 PR
Brakes Air operated T 24 / T 30 brake
1 - PU paint with colour of customer's choice; 2 - Inn
Painting
before paint at wat
Surface Preparation All child parts, chassis and body to be sho
Electricals Side marker lamp - 5 nos each side; To
Stabilizer Fabricated (To be mounted on f
Chassis Rolled Beam
Front Overhang (mm)
Rear Overhang (mm)
Application Pet Coke, Coal, Co
Chassis Frame,
Suspension & Tyres
Chassis Type Ladder Type, H
Frame Section (DxWxT) (mm) 285 x
Front Suspension
Rear Suspension
Anti Roll Bar
Brakes & Tyres

Service Brake
Parking Brake
Front Axle Brake
Rear Axle Brake
Tyre Size (Section
Width(mm)/Section Height (%)/ 295/9
Wheel Rims & Tyres 45.5T
Steering & Cabin

Steering Type
Cabin Type Prima / Signa
Fuel Tank &

Electricals
Fuel Tank HD
Fuel Tank Filing Capacity (ltr) 365 & 557
Emmission Control DOC + DPF +
Voltage
Battery Capacity
Performance
Ventilation
Ventilation Type Blow
Instrument Cluster
Economy/Overspeed)
Feature
TIP TRAILER (TATA 4625.S)
TIP TRAILER 3 AXLE ON 4625.S BS6 TIP
26m3 Tip Trailer 30m3 Tip Trailer 24 m3 Tip Trailer
45500 45500 55000
186 kW @ 2300 RPM

950 Nm @ 1000 - 1800 RPM
6700
BSVI
Linkage
type Single Plate Dry Friction Organic Lining as per applicable GB
430
11.5T Banjo Type Single Reduction RA110LD 2
26 m3 30 m3 Tip Trailer : 24 m3
3320 3320
6902 mm x 2400 mm x 1560 mm 7788 mm x 2400 mm x 1600 mm 7732 mm x 2400 mm x 1290 mm
26 m3 30 m3 24 m3
6902 7788 7732
2400 2400 2400
1560 1600 1290
YS (MPA) - 450-500 min, UTS (MPA) - 500-640 / equivalent YS (
5 mm x 3 mm x 3 mm x 3 mm (BSK-
4 mm x 3 mm x 3 mm x 3 mm (BSK-46) / equivalent
46) / equivalent
-149 (HYVA) / equivalent FE-169 (HYVA) / equivalent FE-169
y axles with manual slack adjuster are provided. Make: TATA / YORK / equivalent 3 nos. 12T heavy duty axl
Tridem; MAKE - YTE 75/90 / equivalent
2" bolt-in type as per AS 2175-1995.
win-speed telescopic; Make - ARAI Approved, Capacity - 28T Twin
10 x 20 /10R x 20 - 16 PR - 12 nos.; 7.50 x 20 - 12 nos. 1
Air operated T 24 / T 30 brake chamber / spring brake actuator Air-o
r of customer's choice; 2 - Inner body to be pretreated before paint; 3 - Anti-rust agent
1 - PU paint with colour of customer's choice; 2
before paint at water accumulation area
rts, chassis and body to be shot blasted & primed before top coat assembly All child parts, c
ker lamp - 5 nos each side; Top marker lamp - 2 nos; Tail lamp - 2 nos Side marker l
abricated (To be mounted on floor plate with 6 mm thick plate) Fabric
Rolled Beam / equivalent
Pet Coke, Coal, Construction aggregates

285 x 65 x 7
295/90 R20
45.5T GCW
HDPE
365 & 557 (365 + 192)
Blower / AC
TIP TRAILER (TATA 5530.S)
TIP TRAILER 3 AXLE ON 5530.S Bell Crank / Bogie BS6
26 m3 Tip Trailer 32 m3 Tip Trailer 36 m3 Tip Trailer
55000 55000 55000
224kW @ 2300 RPM

1100 @ 1100 - 1700 RPM
6700
BSVI
Linkage
9.13 / 1
430
Tip Trailer : 26 m3 Tip Trailer : 32 m3 Tip Trailer : 36 m3

3890
7750 mm x 2400 mm x 1400 mm 7811 mm x 2400 mm x 1700 mm 9139 mm x 2400 mm x 1640 mm
26 m3 32 m3 36 m3
7750 7811 9139
2400 2400 2400
1400 1700 1640
YS (MPA) - 450-500 min, UTS (MPA) - 500-640 / equivalent
5 mm x 3 mm x 3 mm x 3 mm (BSK- 4 mm x 3 mm x 3 mm x 3 mm (BSK- 5 mm x 3 mm x 3 mm x 3 mm (BSK-
46) / equivalent 46) / equivalent 46) / equivalent
FE-169 (HYVA) / equivalent FE-191 (HYVA) / equivalent
nos. 12T heavy duty axles with manual slack adjuster are provided. Make: TATA / YORK / equivalent
Tridem; Make - YTE 75/90 / equivalent
2" bolt-in type as per AS 2175-1995.
Twin-speed telescopic; Make - ARAI approved; Capacity - 28T
10 x 20 / 10R x 20- 16 PR - 12 nos.; 7.50 x 20 - 12 nos.
Air-operated T-24 / T 30 brake chamber / spring brake actuator
of customer's choice; 2 - Inner body to be pretreated before paint; 3 - Anti-rust agent before paint at water accumulation area
All child parts, chassis and body to be shot blasted & primed before top coat assembly
Side marker lamp - 5 nos each side; Top marker lamp - 2 nos; Tail lamp - 2 nos
Fabricated (To be mounted on floor plate with 6 mm thick plate)
Rolled Beam or equivalent
Pet Coke, Coal, Construction aggrega

285 x 65 x 7
295/90 R20
55T GCW
HDPE
365 & 557 (365 + 192)
Blower / AC
PRODUCT
Model BULKER (TATA 5530.S
Type BULKER 3 AXLE TRAILER ON 5
Fully Built Solution 40 m3 Bulker
Weight
ENGINE
Model Cummins ISBe 6.7L BS6 (CRDI
Maximum Power (kW) 224kW @ 2300 RPM
Maximum Torque (Nm) 1100 @ 1100 - 1700 RPM
Emission Compliance BSVI
Transmission
Gearbox Model & Type G1150 8F +1C + 1R Manual Sync
Gear Shift Linkage
Gear Ratio (FGR/TGR) 9.13 / 1
Clutch Type Push type Single Plate Dry Friction O
Axle
Front Axle Model Type TATA Heavy Duty 7T Reverse E
Rear Axle Model Type 21T Banjo Type Single Reduction RA10
Rear Axle Ratio
Dimensions
Body Size/Options Bulker : 40 m3
Cabin
Body Dimensions Internal (LxWxH)
Loadbody cpc (Cu.m)

Overall Length (mm)
Overall Width (mm)
Overall Height (mm)(CBC)
Shell Thickness / Material 5 mm ST 52 / equivalent
Dish End 5 mm ST 52 / equivalent

Manhole (Loading) Dia 450 mm
Test pressure: 2.86 bar (with certificate);
Operating Parameters Operating pressure: 2 bar; Air feed: approx.
1 200 cum/hr
Main Beam The main chassis is a ladder type construction
Landing Legs Two-speed landing legs
Axles TATA / YORK / FUWA / BPW /
Suspension Tridem suspension
Tyres 10 x 20 / 10R x 20 / 11 x 20 / 11R x
Electricals & Reflective Tapes As per regulations
Shot blast, one coat of epoxy primer and final top c
Painting
requirement
Mudguards, one side catwalk with handrail and spra
Accessories
reflective markings, SUPD & RUPD as
Front Overhang (mm)
Rear Overhang (mm)
Application Cement & Fly ash
Chassis Frame,
Suspension & Tyres
Chassis Type Ladder Type, Heavy Duty Fr
Frame Section (DxWxT) (mm) 285 x 65 x 7
Front Suspension Parabolic Leaf Spring
Rear Suspension Bogie / Bell Crank Suspens
Anti Roll Bar
Brakes & Tyres

Service Brake
Parking Brake
Front Axle Brake
Rear Axle Brake
Tyre Size (Section
Width(mm)/Section Height (%)/ 295/90 R20
Wheel Rims & Tyres 55T GCW
Steering & Cabin
Steering Type
Cabin Type Signa Sleeper Cabin
Fuel Tank &

Electricals
Fuel Tank HDPE
Fuel Tank Filing Capacity (ltr) 365 & 557 (365 + 192)
Emmission Control DOC + DPF + SCR + AMO
Voltage
Battery Capacity
Performance
Ventilation
Ventilation Type Blower / AC
Instrument Cluster
Economy/Overspeed)
Feature
ULKER (TATA 5530.S)
AXLE TRAILER ON 5530.S BS6
42 m3 Bulker
55000
s ISBe 6.7L BS6 (CRDI - TCIC)

224kW @ 2300 RPM
100 @ 1100 - 1700 RPM
6700
BSVI
+1C + 1R Manual Synchromesh

Linkage
9.13 / 1
gle Plate Dry Friction Organic Lining
430
avy Duty 7T Reverse Elliot Type

Single Reduction RA109 SRT Tandem
Bulker : 42 m3
3890
5 mm & 4 mm (IS2062 & BSK46) /
equivalent
5 mm (BSK46) / equivalent
450 mm
Operating pressure: 1.85 bar
ladder type construction with cross members

Two-speed landing legs
ORK / FUWA / BPW / equivalent
Tridem suspension
R x 20 / 11 x 20 / 11R x 20 - 16 Ply
As per regulations
xy primer and final top coat with one colour, as per
requirement
k with handrail and spray suppression system, retro
ings, SUPD & RUPD as per regulation
Cement & Fly ash
er Type, Heavy Duty Frame

285 x 65 x 7
gie / Bell Crank Suspension
295/90 R20
55T GCW
Signa Sleeper Cabin
HDPE
365 & 557 (365 + 192)
C + DPF + SCR + AMOX
Blower / AC

TATA Trucks Tractor Trailers Specifications

Uploaded by

Copyright:

Available Formats

TATA Trucks Tractor Trailers Specifications

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

TATA Trucks Tractor Trailers Specifications

Uploaded by

Copyright:

Available Formats

Product / Model TATA ULTRA 3021.

TATA 10.2T Banjo Type Single Reduction

Body Size/Options 30000 kg

Wheel Base (mm) 3320

Car Carriers | LPG Bullets | E-Commerce |

Frame & Suspension

Wheel Rims & Tyres 30T GCW

G950 6F + 1R Manual Synchromesh G1150 8F +1C + 1R Manual Synchromesh

Skeletal :7 m | 12 m | Rigid Axle | Lift Axle

295/90 R20 295/90 R20

39.5T GCW 45.5T GCW

Cowl | Signa Sleeper Cabin Signa Sleeper Cabin

G1150 8F +1C + 1R Manual Synchromesh G1150 8F +1C + 1R Manual Synchromesh

295/90 R20 295/90 R20

45.5T GCW 45.5T GCW

Signa Sleeper Cabin Standard AC Cabin

G1150 8F +1C + 1R Manual Synchromesh G1150 8F +1C + 1R Manual Synchromesh

TATA 7T Reverse Elliot Type TATA 7T Reverse Elliot Type

11.5T Banjo Type Single Reduction

295/90 R20 295/90 R20

Multiple GCW Nodes 51T|52T|53T|54T| Multiple GCW Nodes 51T|52T|53T|54T|

Signa Sleeper Cabin Signa Sleeper Cabin

G1150 8F +1C + 1R Manual Synchromesh G1150 8F +1C + 1R Manual Synchromesh

Flat Bed :12m | Side Flat Bed : 12m | Side

295/90 R20 295/90 R20

55T GCW 55T GCW

Signa Sleeper Cabin Prima Sleeper Cabin

Fully Built Solution

Maximum Power (kW)

Gear Ratio (FGR/TGR)

Clutch Diameter (mm)

Rear Axle Model Type

Rear Axle Ratio

Tyre & Wheel Rim

Front Overhang (mm)

Brakes & Tyres

Steering & Cabin

Fuel Tank &

SKELETAL 2 AXLE TRAILER ON 4018.S BS6

7 m 2A 12TL Skeletal Trailer 12 m 2A 12TL Skeletal Trailer

Cummins ISBe 5.6L BS6 (CRDI - TCIC)

139 kW @ 2300 RPM

TATA G950 6F + 1R Manual Synchromesh

Push type Single Plate Dry Friction Organic Lining

TATA Heavy Duty 7T Reverse Elliot Type

11.5T Banjo Type Single Reduction RA110LD

Skeletal : 7m Skeletal : 12m

7 163 mm x 2 590 mm 12 200 mm x 2 590 mm

2" king pin equivalent to IS: 6763 Part I provided

10 x 20 / 10R X 20 - 16 PR – 08 nos.; 7.5.0 x 20 - 08 nos.

Trailer surface shall be shot blasted and cleaned

Transportation of Shipping Containers

Ladder Type, Heavy Duty Frame

Cowl | Signa Sleeper Cabin

FLAT BED 2 AXLE TRAILER ON 4018.S BS6

7 m 2A 12TL Flatbed Trailer 12 m 2A 12TL Flatbed Trailer

Cummins ISBe 5.6L BS6 (CRDI - TCIC)

139 kW @ 2300 RPM

TATA G950 6F + 1R Manual Synchromesh