0% found this document useful (0 votes)
52 views9 pages

Reviewer

The document contains a 22 question quiz about building design and construction codes. It covers topics like thermal insulation, building loads, floor types, codes for vertical transport and architectural design, construction phases like bidding and design development, building representations like site plans and perspectives, and elements of building codes and standards. The quiz contains multiple choice questions testing knowledge of key terms and concepts.

Uploaded by

Gab Dy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
52 views9 pages

Reviewer

The document contains a 22 question quiz about building design and construction codes. It covers topics like thermal insulation, building loads, floor types, codes for vertical transport and architectural design, construction phases like bidding and design development, building representations like site plans and perspectives, and elements of building codes and standards. The quiz contains multiple choice questions testing knowledge of key terms and concepts.

Uploaded by

Gab Dy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

Quiz 1

Question 1
5 out of 5 points
Thermal insulation reduces the noise that enters the building

Correct Answer:
b.
No
Question 2
5 out of 5 points
This criterion refers to the stability of buildings

Correct Answer:
b.
Must resist the loads coming to it

Question 3
5 out of 5 points
Floor next to the ground is called

Correct Answer:
d.
None of the above

Question 4
0 out of 5 points
Which among these codes is used as reference in the design of vertical transport in buildings?

Correct Answer: d.
Philippine Mechanical Engineering Code

Question 5
0 out of 5 points
Which among these codes is the primary reference of architects?

Correct Answer:
b.
National Building Code

Question 6
5 out of 5 points
The first step of this phase is the preparation of the bid documents to go out to potential
contractors for pricing.

Correct Answer: c.
Bid or Negotiation
Question 7
5 out of 5 points

This study source was downloaded by 100000820648477 from CourseHero.com on 11-09-2022 03:35:50 GMT -06:00

https://www.coursehero.com/file/146179631/Reviewerpdf/
This criterion refers to the durability of buildings

Correct Answer:
c.
Must continue to fulfill its function

Question 8
5 out of 5 points
is a general view of a project that includes the entirety of a property, accesses and related
structures that may represent an interest or a constraint

Correct Answer:
c.
Site development plan

Question 9
5 out of 5 points
This criterion refers to the economy of buildings

Correct Answer: c.
Must be achieved with the minimum use of resources

Question 10
5 out of 5 points
Acoustic insulation ensures that excessive heat loss from the building is prevented

Correct Answer:
b.
No

Question 11
5 out of 5 points
is a three-dimensional representation of a house or building or one of its elements that facilitates
understanding of the relationships between its different sides

Correct Answer: c.
Perspective
Question 12
0 out of 5 points
Which documents are used for bidding purposes?

Correct Answer: c.
Detailed drawings and Material specifications

Question 13
0 out of 5 points
Which among the codes is used as reference for the sanitary design of buildings?

This study source was downloaded by 100000820648477 from CourseHero.com on 11-09-2022 03:35:50 GMT -06:00

https://www.coursehero.com/file/146179631/Reviewerpdf/
Correct Answer: c.
National Plumbing Code

Question 14
5 out of 5 points
The primary focus in developing codes and standards in the early stage was

Correct Answer:
b.
Avoid loss of life and property

Question 15
5 out of 5 points
This phase lays out the mechanical, electrical, plumbing, structural, and architectural details of
the building.

Correct Answer: b.
Design Development

Question 16
0 out of 5 points
What is the disadvantage of codes and standards?

Correct Answer:
d.
None of the above

Question 17
5 out of 5 points
This refers to the portion of the structure above ground

Correct Answer: b.
Super structure
Question 18
5 out of 5 points
is a view from above showing the different spaces and limits (walls, doors and windows) of a
floor of a house or building

Correct Answer: c.
Floor plan

Question 19
5 out of 5 points
Codes and standards typically serve as minimum requirements for many of the high-
performance building attributes

This study source was downloaded by 100000820648477 from CourseHero.com on 11-09-2022 03:35:50 GMT -06:00

https://www.coursehero.com/file/146179631/Reviewerpdf/
Correct Answer: b.
Yes

Question 20
5 out of 5 points
In the design of building elements like foundation, columns, beams and slab, which among these
codes is used as reference?

Correct Answer:
a.
National Structural Code of the Phil

Question 21
5 out of 5 points
The basement is part of the super structure of the building

Correct Answer: b.
No

Question 22
5 out of 5 points
The building as a structure must continue to fulfill its function

Correct Answer:
a.
Yes

Question 23
5 out of 5 points
This criterion refers to the function of buildings

Correct Answer: a.
Satisfy the need for which it was built
Question 24
5 out of 5 points
Codes are developed with the intent of being adopted by a jurisdiction as criteria for design,
construction, or operation of buildings.

Correct Answer: a.
Yes

Question 25
5 out of 5 points
It is a geometric projection along a vertical plane which represents the exterior aspect of a
building

This study source was downloaded by 100000820648477 from CourseHero.com on 11-09-2022 03:35:50 GMT -06:00

https://www.coursehero.com/file/146179631/Reviewerpdf/
Correct Answer: d.
Elevation

Question 26
5 out of 5 points
They provide a common language and requirements for the design, construction, and operations
of buildings.

Correct Answer:
d.
Both codes and standards

Question 27
5 out of 5 points
Establishes the vision and goals for the project and chooses the project team

Correct Answer: c. Owner

Question 28
5 out of 5 points
In contemporary times, codes and standards are made to address new design concepts and
have expanded beyond health and safety requirements to include other societal values such as:

Correct Answer:
d.
all of the above

Question 29
5 out of 5 points
In the schematic design of building, who normally discusses with the owner?

Correct Answer: b.
Architect
Question 30
5 out of 5 points
A view showing a house or building cut along an interesting vertical plane for understanding the
structure, in particular, to present the relationships between the different levels.

Correct Answer: d.
Section

HW1
• Question 1
10 out of 10 points
Is there a toilet and bath at bedroom 2, 3rd flr?

Correct Answer: b.

This study source was downloaded by 100000820648477 from CourseHero.com on 11-09-2022 03:35:50 GMT -06:00

https://www.coursehero.com/file/146179631/Reviewerpdf/
No

• Question 2
10 out of 10 points
nd
In the 2 flr, approximately how big is bedroom 2?

Correct Answer:
b.
6.8sq.m

• Question 3
10 out of 10 points
At the roofdeck, is the laundry flooring lower than the flooring of the open area?

Correct Answer:
a.
Yes

• Question 4
10 out of 10 points
Is the porch higher than the garage?

Correct Answer:
b.
No

• Question 5
10 out of 10 points
How many cars can park in the garage?

Correct Answer: b.
2

• Question 6
10 out of 10 points
rd
At the 3 flr, which door type should be installed in the Master Bedroom?
Correct Answer:
c.
D3

• Question 7
10 out of 10 points
Where can you find the porch?

Correct Answer: c.
Ground flr

• Question 8
10 out of 10 points
In the 3rd flr, approximately how big is bedroom 1?

This study source was downloaded by 100000820648477 from CourseHero.com on 11-09-2022 03:35:50 GMT -06:00

https://www.coursehero.com/file/146179631/Reviewerpdf/
Correct Answer: a.
12.3sq.m

• Question 9
10 out of 10 points
How tall is the building?

Correct Answer:
a.
11.5m

• Question 10
10 out of 10 points
In terms of flooring elevation, which is higher?

Correct Answer: d.
Reception

• Question 11
10 out of 10 points
In terms of flooring elevation, which is higher?

Correct Answer:
b.
Reception

• Question 12
10 out of 10 points
1. Where is the BBQ area located?

Correct Answer: c.
Roof deck
• Question 13
0 out of 0 points
Where is the drying area located?

Correct Answer: c.
Second flr.

• Question 14
10 out of 10 points
At the ground flr, which window type should be installed in the Grand’s Bedroom?

Correct Answer:
d.
W2

• Question 15
10 out of 10 points

This study source was downloaded by 100000820648477 from CourseHero.com on 11-09-2022 03:35:50 GMT -06:00

https://www.coursehero.com/file/146179631/Reviewerpdf/
In the 2nd flr, is the living room floor higher than the balcony?

Correct Answer: b.
Yes

HW2
• Question 1
10 out of 10 points
Which among these material properties fall into physical properties category?

Correct Answer:
c.
acoustical

• Question 2
10 out of 10 points
Dark color tend to recede.

Correct Answer:
a.
True
• Question 3
10 out of 10 points
Material decision tends to arise from the design concept.

Correct Answer:
a.
True

• Question 4
10 out of 10 points
Which among these material properties fall into context category?

Correct Answer:
a.
historical

• Question 5
10 out of 10 points
.Concrete has superior tensile strength.

Correct Answer: b.
False

• Question 6
10 out of 10 points
What type of wall cladding was used in the video?

This study source was downloaded by 100000820648477 from CourseHero.com on 11-09-2022 03:35:50 GMT -06:00

https://www.coursehero.com/file/146179631/Reviewerpdf/
Correct Answer: c.
Shingles

• Question 7
10 out of 10 points
Reinforced concrete is made up of steel and concrete

Correct Answer:
a.
True

• Question 8
10 out of 10 points
Which among these material properties fall into experiential category?

Correct Answer: b.
perceptions

• Question 9
10 out of 10 points
What material was used for window frame?

Correct Answer:
b.
Aluminum

• Question 10
10 out of 10 points
Steel is excellent in

Correct Answer: b.
Tension

This study source was downloaded by 100000820648477 from CourseHero.com on 11-09-2022 03:35:50 GMT -06:00

https://www.coursehero.com/file/146179631/Reviewerpdf/
Powered by TCPDF (www.tcpdf.org)

You might also like