Data Sheet Tps Engine Heater

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Thermosiphon Heating Systems

TPS
Hotstart’s TPS thermosiphon heating
system is a coolant preheater,
developed to maintain optimal
temperatures for diesel and gas
engines in stationary land power,
marine, construction equipment, and
truck applications.

PROVEN DESIGN EASY INSTALLATION $


Depend on consistent, reliable heating with the The TPS’s inlet and outlet positions allow
proven design of the TPS thermosiphon heater. for quick and simple installations, reducing
Heated coolant rises through the engine block, complicated plumbing requirements. Each
maintaining critical fluid temperatures for easy heater comes with a mounting kit for optimized
engine starts when needed. installations.

VERSATILE & ADAPTABLE $


The TPS can be configured for almost any
weather-protected application. Multiple options
and voltages are available, including UL/C-US
listed and CE-compliant models.

hotstart.com [email protected] DS-TPS-E


© 2020 Hotstart 2021-12/rev6
Thermosiphon Heating System

TPS
OUTLET Ordering Information
TPS
Engine Power Supply Heating System
Displacement V Ø Hz kW A Model Number
H
120 1 60 0.5 4.2 TPS051GT8-000

120 1 60 0.5 4.2 TPS051GT10-000

INLET 120 1 60 0.5 4.2 TPS051GT12-000

150 CID
240 1 60 0.5 2.1 TPS052GT8-000
2.5 L
D 240 1 60 0.5 2.1 TPS052GT10-000

Height (H) Depth (D) Weight 240 1 60 0.5 2.1 TPS052GT10-013

7.9" 4.6" 1.7 lb 240 1 60 0.5 2.1 TPS052GT12-000


200 mm 117 mm 771 g
120 1 60 1 8.4 TPS101GT8-000
48" 16-3 HPN
TPS System 120 1 60 1 8.4 TPS101GT10-000
Phase single-phase (1 Ø)
120 1 60 1 8.4 TPS101GT12-000
Voltage 120 V 240 V 277 V
350 CID
240 1 60 1 4.2 TPS102GT8-000
Ingress IP41 5.7 L

Tank Material Polyphenylene Sulfide (PPS) 240 1 60 1 4.2 TPS102GT10-000

Heating Element Material Incoloy 800 240 1 60 1 4.2 TPS102GT10-013


Min./Max. Ambient Temp -40–40 °C (-40–104 °F)
240 1 60 1 4.2 TPS102GT12-000
Certification UL/C-US-listed, CE-compliant
120 1 60 1.5 12.5 TPS151GT8-000
TPS Coolant
120 1 60 1.5 12.5 TPS151GT10-000
Fluid Type Water Coolant mix (50% water/50% glycol)
120 1 60 1.5 12.5 TPS151GT12-000
Heat Power* 0.5 kW 1 kW 1.5 kW 1.8 kW 2 kW
350–500 CID
Temp. Control Fixed, 100 – 120 °F (38 – 49 °C) 240 1 60 1.5 6.3 TPS152GT8-000
5.7–8.2 L
Max. Pressure 90 psi (620 kPa) 240 1 60 1.5 6.3 TPS152GT10-000
Inlet/Outlet 0.625” hose barb (15.9 mm)
240 1 60 1.5 6.3 TPS152GT10-013

Temperature Range Numerical 240 1 60 1.5 6.3 TPS152GT12-000

ON OFF Code 120 1 60 1.8 15 TPS181GT8-000

80 °F (27 °C) 100 °F (38 °C) 8 120 1 60 1.8 15 TPS181GT10-000


120 1 60 1.8 15 TPS181GT12-000
100 °F (38 °C) 120 °F (49 °C) 10
500–700 CID
240 1 60 2 8.3 TPS202GT8-000
120 °F (49 °C) 140 °F (60 °C) 12 8.2–11.5 L
240 1 60 2 8.3 TPS202GT10-000

Options shown represent typical tested or certified configurations. 240 1 60 2 8.3 TPS202GT10-013
Additional options or configurations may be available. For assistance with 240 1 60 2 8.3 TPS202GT12-000
your heating system application, contact Hotstart at 509.536.8660 or
[email protected]. Power cord length on all models – 48” (1219 mm). Part numbers ending
in -013 feature 2 meter round cord & Schuko plug - CE compliant
*2 kW available in 240 V only, 1.8 kW available in 120 V only.
TPS engine preheaters include a fixed setting thermostat. A single or
double digit numeral at the end of the model number prefix designates
the temperature range. Example: TPS101GT10-000
TPS heaters are available with in-line adjustable and remote thread-in
fixed thermostat. Please reference Hotstart's product catalog for part
numbers.

hotstart.com [email protected] DS-TPS-E


© 2020 Hotstart 2021-12/rev6

You might also like