Form PAUT

Download as xlsx, pdf, or txt
Download as xlsx, pdf, or txt
You are on page 1of 2

PHASED ARRAY ULTRASONIC TESTING

REPORT
Project Name: Report No.:
Item / Category.:

Client Name: Request No.:


Procedure No: Weld Preparation:
Acceptance Standard: Calibration, Reference Block:
PAUT instrument type: Material: DWG No.:
PAUT instrument: Surface Condition:
Scanner type: Couplant: WPS No.: Page
Matl.: SPP Date of inspection:
Probe Wedge
PCD/
Skew Range Sensitivity
Type Serial No Freq (MHz) PCS Type Serial No Angle
(mm)/µs (dB)
(mm)
PA-1(SK90)
PA-1(SK270)

location
Identification No.: dB higher than
reference level
(mm)
Length
of Discontinuity Type of weld Welder Remark
No.
defect Evaluation defect
Scanning
Position

length

Joint Size/ Thk Start End (mm)


(mm)
Scan

No. Length(inch) (mm) Xs Xe

ABBREVIATION: ACC: Accepted U: Under Cut PCS: Probes center seperation LF: Lack of Fusion P: Porosity
(note: all dimensions in REJ: Rejected O/D: Outside diameter LxT: Length x thickness CR:Crater Crack
millimeter) SI: Slag inclusion
R/S: Re-scan C: Crack CP:Cluster Porosity LOP : Lack Of Penetrate

CANDT PVC-MS ICA VIETSOVPETRO

Name: Name: Name: Name:

Signature: Signature: Signature: Signature:


Date: Date: Date: Date:

You might also like