Scribd Logo
Upload

Welcome to Scribd!

  • 11 views

    Sheet 5

    Uploaded by

    Dhruv Mistry 19.9014
    The document provides instructions for drawing projections of different geometric planes and shapes. It includes: 1) A pentagonal plane with one corner inclined at 30 degrees to the horizontal plane (HP). Projections of the pentagonal plane are to be drawn. 2) A circular plane with a 60mm diameter, resting on the HP at a point and inclined at 30 degrees to the HP. The diameter of the circular plane makes an angle of 60 degrees with the vertical plane (VP). Projections of the circular plane are to be drawn.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Sheet 5

    Uploaded by

    Dhruv Mistry 19.9014
    11 views1 page
    The document provides instructions for drawing projections of different geometric planes and shapes. It includes: 1) A pentagonal plane with one corner inclined at 30 degrees to the horizontal plane (HP). Projections of the pentagonal plane are to be drawn. 2) A circular plane with a 60mm diameter, resting on the HP at a point and inclined at 30 degrees to the HP. The diameter of the circular plane makes an angle of 60 degrees with the vertical plane (VP). Projections of the circular plane are to be drawn.

    Original Description:

    Design engineering

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for drawing projections of different geometric planes and shapes. It includes: 1) A pentagonal plane with one corner inclined at 30 degrees to the horizontal plane (HP). Projections of the pentagonal plane are to be drawn. 2) A circular plane with a 60mm diameter, resting on the HP at a point and inclined at 30 degrees to the HP. The diameter of the circular plane makes an angle of 60 degrees with the vertical plane (VP). Projections of the circular plane are to be drawn.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    11 views1 page

    Sheet 5

    Uploaded by

    Dhruv Mistry 19.9014
    The document provides instructions for drawing projections of different geometric planes and shapes. It includes: 1) A pentagonal plane with one corner inclined at 30 degrees to the horizontal plane (HP). Projections of the pentagonal plane are to be drawn. 2) A circular plane with a 60mm diameter, resting on the HP at a point and inclined at 30 degrees to the HP. The diameter of the circular plane makes an angle of 60 degrees with the vertical plane (VP). Projections of the circular plane are to be drawn.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    AreuorPentano p t e o f . u5 nm s i e s nay one o f Corners or pon tne pentug on is inelines a ug to H.P.

    The s ise o f fne pertugon u i c h i s opros*


    corner, h ich is on HP, S inclined at 3 to the V.P. Drow rojeoHon5 ot the p l n G

    be

    1plune 4s
    b'e

    L NAL
    INITAL INTERMEDIATE
    POSTTION POSITION POSTTION GANS
    2)Acirculer Plone O 60 mm diometer 5 restin9 on H.P, on
    Point A o TS T C m terencC. he POhe S mchned ot

    30 to the H.P. The diomete hB of the Plone mukes


    an
    CAngle ot us w*h the VP Drow the ProJ etion
    ot te Circlov plone.

    e ' e l2, 3 u,io plane

    NOTEoe ALE OTMENTIONSAAE INn.mM


    DATE SIGN
    STD.28-1e SIGmA INSTITUTE OF
    ENGTNEERI NG
    FAIR.
    COMP. PROTEC TI ON OF PLANES
    6 VARS ANT AKASKH

    FINAL
    |SEM./BR.|1st/ t.T.
    TNETTA L INTERMEDTATE
    PoSTTTON POS1TION (ANS ROLL No.: 21s0o116o2
    POSLTION
    DRG. No.: 6
    SCALE: 1:1

    You might also like