TLE 1st Quarter Exam Final
TLE 1st Quarter Exam Final
TLE 1st Quarter Exam Final
Department of Education
REGION III
SCHOOLS DIVISION OF CABANATUAN CITY
IMELDA INTEGRATED SCHOOL
SUMMATIVE TEST IN ELECTRICAL INSTALLATION AND MAINTENANCE 8
Multiple Choice.
Directions: Read the statement carefully and identify what is being described or
defined. Write the letter of the correct answer on your answer sheet.
1. This is used for griping, holding, cutting electrical wires and cables and even small nails.
Usually used by linemen in doing heavy tasks.
a. Hammer c. Combination Pliers
b. Wire Stripper d. Philips Screw Driver
2. Used for cutting and holding fine wires. This can reach tight space or small opening where
other pliers cannot reach and also used in making terminal loops of copper wires.
a. Hammer c. Flat Screw Driver
b. Long Nose Pliers d. Allen Screw Driver
3. This has a cross tip resembling a positive (+) sign. It is used to drive screws with cross
slot heads.
a. Hacksaw c. Electrician’s Knife
b. Wire Stripper d. Philips Screw Driver
4. This tool is used in driving, pounding and pulling out nails.
a. Hammers c. Combination Pliers
b. Wire Stripper d. Philips Screw Driver
5. A tool used for removing insulation of medium sized wires ranging from gauge #10 to
gauge #16
a. Hacksaw c. Electrician’s Knife
b. Wire Stripper d. Philips Screw Driver
6. A small drilling machine with a chuck capacity of ¼” to 3/8”. It is used in making holes on
metal sheets and concrete walls.
a. Long Nose Pliers c. Stubby Screw Driver
b. Electrician’s Knife d. Portable Electric Drill
7. A document generated by a user department or storeroom-personnel to notify the
purchasing department of items it needs to order, their quantity, and the time frame
a. Inventory c. Job Order
b. Requisition Slip Form d. Borrowers Form
8. The raw materials, work-in-process goods and completely finished goods that are
considered to be the portion of a business's assets that are ready or will be ready for sale.
a. Inventory c. Job Order
b. Requisition Slip Form d. Borrowers Form
9. A form use to request for tools and equipment to be used for a particular job. is a written
instruction to perform a work
a. Inventory c. Job Order
b. Requisition Slip Form d. Borrowers Form
10. A written instruction to perform a work according to specified requirements, within
specified timeframe and cost estimates.
a. Inventory c. Job Order
b. Requisition Slip Form d. Borrowers Form
11. Purchase Requisition is also called _______________.
a. Inventory c. Purchase Request or Requisition
b. Purchase List d. Purchase Recommendation
12. All of the following are questions you should ask when receiving a shipment, EXCEPT?
a. Is it for me? c. Is it damaged?
b. Can I have a cash refund? d. Is the piece count correct?
13. An instrument used to measure the amount of electrical current intensity in a circuit.
a. Ammeter c. Ohmmeter
b. Voltmeter d. Micrometer
14. A pocket-sized tools used to test the line wire or circuit if there is current in it.
a. Ruler c. Wire gauge
b. Test light d. Pull-push rule
15. A measuring tool used to measure the length of an object in centimeter and inches.
a. Ruler c. Wire gauge
b. Test light d. Pull-push rule
16. It is used to measure the diameter of wires/conductors in circular mils. It can measure
small and big sizes of wires and cables.
a. Ammeter c. Ohmmeter
b. Voltmeter d. Micrometer
17. It is used to measure the voltage, resistance and current of a circuit. It is connected in
parallel or series with the circuit depending on what to measure.
a. Ammeter c. Ohmmeter
b. Voltmeter d. Volt-Ohmmeter
18. An instrument used to determine the size of wires/conductors.
a. Ruler c. Wire gauge
b. Test light d. Pull-push rule
19. It is a measuring tool used to measure length, width and thickness of short flat object and
in sketching straight lines.
a. Ruler c. Wire gauge
b. Test light d. Pull-push rule
20. It is an instrument used to measure the electrical pressure or voltage of a circuit.
a. Ammeter c. Ohmmeter
b. Voltmeter d. Micrometer
21. It is also called tong-tester. It is used to measure current flowing in a conductor.
a. Ammeter c. Ohmmeter
b. Voltmeter d. Clamp Ammeter
22. It is the process or the result of determining the ratio of a physical quantity such as
length, time, temperature, etc.
a. Measurement c. Requisition Slip Form
b. Extension Cord d. Common Wire Splice
23.
a. Fuse c. Circuit Breaker
b. Switch d. Connected Wires
24.
a. Bell c. Conductor
b. Cell d. Push Button
25.
a. Cell c. Conductor/Wire
b. Fuse d. Connected Wires
26.
a. Fuse c. Circuit Breaker
b. Switch d. Connected Wires
27.
a. Fuse c. Circuit Breaker
b. Switch d. Connected Wires
28.
a. Fuse c. Circuit Breaker
b. Switch d. Connected Wires
29.
a. Floor Outlet c. Incandescent Lamp
b. Fluorescent Lamp d. Duplex Convenience Outlet
30.
a. Diode c. Male Plug
b. Ground d. Service Entrance
31.
a. Floor Outlet c. Incandescent Lamp
b. Fluorescent Lamp d. Duplex Convenience Outlet
32.
a. Diode c. Lightning Arrester
b. Ground d. Kilowatt-Hour Meter
33.
a. Antenna c. Weatherproof Outlet
b. Floor Outlet d. Special Purpose Outlet
34.
a. Diode c. Male Plug
b. Capacitor d. Service Entrance
35.
a. Diode c. Male Plug
b. Capacitor d. Service Entrance
36.
a. Diode c. Capacitor
b. Battery d. Male Plug
37. An action to clean your work place thoroughly so that there is no dust on floor, machines
and equipment?
a. sorting c. sanitizing
b. sweeping d. self-discipline
39. An action to identify and eliminate all unnecessary items from your work place and
dispose them.
a. sorting c. sanitizing
b. sweeping d. self-discipline
40. An action to arrange or put every necessary item in good order so that they can be easily
picked for use. ‖ A place for everything, everything is in place‖
a. sweeping c. sanitizing
b. systematizing d. sorting
41. A condition of maintaining high standard of cleaning and workshop organization at all
times.
a. sweeping c. sanitizing
b. systematizing d. sorting
42. It is a condition of training people to follow cleaning disciplines independently.
a. Seiri c. Seiso
b. Seiketsu d. Shitsuke
43. What is hazard?
a. Something that has the potential to cause harm
b. Something that can make you fall over
c. The possibility that harm may occur
d. All things that cause death
44. What is a risk?
a. Something that has the potential to cause harm
b. Something that can make you fall over
c. The possibility that harm may occur
d. All things that cause death
45. A leather shoes can protect you from what hazard?
a. Stepping on a sharp objects, dropping something heavy on your foot and slipping
over.
b. Completing a student plan for being unprepared for learning.
c. Hurting your foot.
d. Excessive Noise
46. Safety could define as _________.
a. Not likely to be harmed or lost
b. The condition of being protected from or unlikely to cause danger, risk or injury.
c. Avoiding an accident.
d. Wearing all PPE in the workshop.
47. What hazard will an apron protect you from?
a. Getting your clothes tangled in equipment.
b. Looking fashionable.
c. Staining your uniform
d. Looking good at work
48. It can affect your skin by contact or the body either through lungs if air is contaminated
with chemicals vapor, mist or dust.
a. Biological Hazards c. Chemical Hazards
b. Physical Hazards d. Psychological Hazards
49. Excessive noise is an example of what hazard?
a. Biological Hazards c. Chemical Hazards
b. Physical Hazards d. Psychological Hazards
50. Stress caused by the environment is an example of what hazard?
a. Biological Hazards c. Chemical Hazards
b. Physical Hazards d. Psychological Hazards
TLE 8 PERIODICAL EXAM
ANSWER KEY
1. C 26. A
2. B 27. D
3. D 28. C
4. A 29. C
5. C 30. B
6. D 31. B
7. B 32. D
8. A 33. A
9. C 34. B
10. C 35. A
11. C 36. B
12. B 37. B
13. A 38. D
14. B 39. A
15. A 40. B
16. D 41. C
17. D 42. D
18. C 43. A
19. D 44. C
20. B 45. A
21. D 46. B
22. A 47. A
23. B 48. C
24. F 49. B
25. C 50. D