Scribd
Upload
88 views

Keypad - I2C.cpp - Bloco de Notas

This library allows for the use of a matrix keypad connected via I2C. It uses a key encoder and interrupt pin to detect key presses. The library initializes the keypad with an address and interrupt pin. It provides functions to begin using the keypad, get the pressed key character, and get the pressed key number.

Uploaded by

Jackson Ferreira
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
88 views

Keypad - I2C.cpp - Bloco de Notas

This library allows for the use of a matrix keypad connected via I2C. It uses a key encoder and interrupt pin to detect key presses. The library initializes the keypad with an address and interrupt pin. It provides functions to begin using the keypad, get the pressed key character, and get the pressed key number.

Uploaded by

Jackson Ferreira
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

/*******************************************************************************

*************
* Arduino library for matrix keypad using key encoder and I2C
* Created 07/09/2014
* Christophe Caiveau [email protected]
*
* Use this library freely
*
* Instance :
* Keypad_I2C kpd(int i2c_addr, int int_pin); // i2c_addr I2C address of the
keypad adapter
* // int_pin interrupt input pin D2
or D3
*
* Functions :
* kpd.begin();
* kpd.getKey();
* kpd.getKeyNum();
*
* MM74C922N datasheet at http://www.ti.com/lit/ds/symlink/mm54c923.pdf
* PCF8574 datasheet at http://www.nxp.com/documents/data_sheet/PCF8574.pdf
*

********************************************************************************
***********/

#include <Keypad_I2C.h>
#include <Wire.h>

volatile int newkey;

char Keypad_I2C::keymap[17] = {'1', '2', '3', 'A',


'4', '5', '6', 'B',
'7', '8', '9', 'C',
'*', '0', '#', 'D'};

Keypad_I2C::Keypad_I2C(int i2c_addr, int int_pin) {


I2C_ADDR = i2c_addr;
INT_PIN = int_pin;
}

void Keypad_I2C::begin() {
begin_priv();
}
void Keypad_I2C::begin_priv() {
pinMode(INT_PIN, INPUT);
Wire.begin();
attachInterrupt(1, keyread, FALLING);
}

void Keypad_I2C::keyread(){
newkey = 1;
}
char Keypad_I2C::getKey (){
if(newkey == 1){
Wire.requestFrom(I2C_ADDR, 1);
keycode = Wire.read() & 0x0f;
newkey = 0;
return keymap[keycode];
}
return 0;
}
char Keypad_I2C::getKeyNum (){
if(newkey == 1){
Wire.requestFrom(I2C_ADDR, 1);
keycode = Wire.read() & 0x0f;
newkey = 0;
int tempkey = keymap[keycode] - '0';
if( tempkey >= 0 && tempkey <= 9){
return keymap[keycode];
}
}
return 0;
}

You might also like