This document provides a field quality plan that outlines the testing required for various materials used in civil works including mortar, concrete, stone, bricks, marble, wood, steel, and other materials. It lists the components, characteristics to be tested, acceptance standards to refer to, frequency of testing, and responsibilities for testing and documentation for each material. Testing is to be done in the lab or field as required and records are to be properly maintained.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online from Scribd
This document provides a field quality plan that outlines the testing required for various materials used in civil works including mortar, concrete, stone, bricks, marble, wood, steel, and other materials. It lists the components, characteristics to be tested, acceptance standards to refer to, frequency of testing, and responsibilities for testing and documentation for each material. Testing is to be done in the lab or field as required and records are to be properly maintained.
This document provides a field quality plan that outlines the testing required for various materials used in civil works including mortar, concrete, stone, bricks, marble, wood, steel, and other materials. It lists the components, characteristics to be tested, acceptance standards to refer to, frequency of testing, and responsibilities for testing and documentation for each material. Testing is to be done in the lab or field as required and records are to be properly maintained.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online from Scribd
This document provides a field quality plan that outlines the testing required for various materials used in civil works including mortar, concrete, stone, bricks, marble, wood, steel, and other materials. It lists the components, characteristics to be tested, acceptance standards to refer to, frequency of testing, and responsibilities for testing and documentation for each material. Testing is to be done in the lab or field as required and records are to be properly maintained.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online from Scribd
Download as doc, pdf, or txt
You are on page 1/ 15
NAME OF AGENCY & ADDRESS :
FIELD QUALITY PLAN
QP NO.: JOB DETAILS :Test of mortar used forREV.: 00 Civil Work DATE.: PAGE : 1 OF VALID UPTO SUB-ITEM : TYPE OF CHECK QUANTUM/ FREQUENCY OF CHECK 6. Water from each source shall be got tested before the commencement of work and thereafter once in every three months till tthe completion of work.Water from minicipal source need be tested only once in six months.Number of test for each source shall be 3. CPWD/IS3025 REFERENCE DOC. AND ACCEPTANCE STD. 7.
TO BE FILLED IN BY NTPC PROJECT : MUNPL PO NO. : DATE : FORMAT OF RECORDS REMARKS M U N P L
SL. COMPONENTS OF OPERATION CHARACTERISTICS CLASS OF NO. CHECK
1. Mortar 1 Water
2.
3. (i)PH Value
4. Lab
*5.
8.
9.
(II)Limits of acidity (iii) Limits of alkalinity (iv)Percentage of solids (a) Chlorides (b)Suspended solids (c) Sulphates (d)Inorganic Solids (e)Organic solids
Lab Lab Lab Lab lab Lab Lab Lab
Cement
Physical Requirement
(i)Fineness (ii)Soundness (iii)Setting time(initial & final) (iv)Compressive Strength (v)Consistency of 3 Sand standard cement paste (i)Organic Impurities (ii) Silt Content (iii) Particle size MANUFACTURER/ SUBCONTRACTOR
Lab lab Lab Lab Lab Field Field Field or lab as Once/50 ton
CPWD/IS4031 CPWD/IS4031 CPWD/4031 CPWD/4031 CPWD/4031 CPWD/appendix A CPWD/Appendix C CPWD/Appendix B FOR NTPC USE Reviewed By : DOC NO. Approved By
distributiona,b,c,d,e per EI CONTRACTOR LEGEND : *In column D record identified by NTPC with tick, shall be essentially included by contractor in QA documentation. ** M Manufacturer / Sub-contractor SIGNATURE C Nominated Inspection Agency P Perform; V Verification; N NTPC; W Witness; All W in column N shall be CHP of NTPC.
Name & Designation
NAME & Designation And SEAL
NAME OF AGENCY & ADDRESS :
FIELD QUALITY PLAN
QP NO.: JOB DETAILS :Test required for mortarREV.: 00 used in civil work DATE.: PAGE : 1 OF VALID UPTO SUB-ITEM : TYPE OF CHECK QUANTUM/ FREQUENCY OF CHECK 6. For all material 45 Cum 40 Cum 40 Cum 40 Cum 40 Cum 40 Cum 40 Cum REFERENCE DOC. AND ACCEPTANCE STD. 7. CPWD/IS 2388 CPWD/Appendix A CPWD/IS 2388 CPWD/IS 2386 CPWD/IS 2386 CPWD/IS 2386 CPWD/IS 2386 CPWD/IS 2386
TO BE FILLED IN BY NTPC PROJECT : MUNPL PO NO. : DATE :
SL. COMPONENTS OF OPERATION CHARACTERISTICS CLASS OF NO. CHECK
FORMAT OF RECORDS
REMARKS
1. Concrete Work Stone Aggregate
2.
3. (a)percentage of soft or deleterious material (b) Particle size (i) Estimation of organic impurities (ii) Surface Mois ture (iii)Dtermination of 10 % fine value (iv) Specific gravity (v) Bulk Density (vi) aggregate crushing strength (vii) aggregate impact
4.
*5. Field or lab test as required Field/Lab Field/Lab Field/Lab Field/Lab Field/Lab Field/Lab Field/Lab
8.
9.
Field/Lab Field/lab
40 Cum 15 Cum
CPWD/IS 2386 CPWD/Appendix D
Concrete
value Slump test
CONTRACTOR MANUFACTURER/ SUBCONTRACTOR
SIGNATURE
LEGEND : *In column D record identified by NTPC with tick, shall be essentially included by contractor in QA documentation. ** M Manufacturer / Sub-contractor C Nominated Inspection Agency P Perform; V Verification; N NTPC; W Witness; All W in column N shall be CHP of NTPC.
FOR NTPC USE
DOC NO.
Reviewed By :
Approved By
Name & Designation
NAME & Designation And SEAL
NAME OF AGENCY & ADDRESS :
FIELD QUALITY PLAN
QP NO.: JOB DETAILS : Test required for RCCREV.: 00 used in civil work DATE.: PAGE : 1 OF VALID UPTO SUB-ITEM :
TO BE FILLED IN BY NTPC PROJECT : PO NO. : DATE :
SL. COMPONENTS OF OPERATION CHARACTERISTICS CLASS OF NO. CHECK
TYPE OF CHECK
QUANTUM/ REFERENCE DOC. FREQUENCY OF AND CHECK ACCEPTANCE STD. 6. 5 Cum 20 Cum 7. CPWD/AppendixD of Chapter-4 CPWD/AppendixD
FORMAT OF RECORDS
REMARKS
1. 1
2. RCC(Nominal MiX)
3. (a)Slump Test (b) Cube test
4.
*5. Field/lab Lab
8.
9.
RCC(Design Mix) Coarse Aggregate Fine aggregate Cement Fresh Concrete (a) Slump test (b) Cube Test Field Lab 50 Cum 50 Cum CPWD/Appendix DChapter-4 CPWD/Appendix A
RCC(Ready Mix) Coarse aggregate Fine aggregate Cement Fresh concrete (a)Slump Test (b) Cube Test Field/Lab Lab 50 Cum 50 Cum CPWD/AppendixD of chapter-4 CPWD/AppendixA
Steel for RCC MANUFACTURER/ SUBCONTRACTOR
Physical and chemical test CONTRACTOR LEGEND : FOR NTPC USE DOC NO.
SIGNATURE
*In column D record identified by NTPC with tick, shall be essentially included by contractor in QA documentation. ** M Manufacturer / Sub-contractor C Nominated Inspection Agency P Perform; V Verification; N NTPC; W Witness; All W in column N shall be CHP of NTPC.
Reviewed By :
Approved By
Name & Designation
NAME & Designation And SEAL
NAME OF AGENCY & ADDRESS :
FIELD QUALITY PLAN
QP NO.: JOB DETAILS : Test required for StoneREV.: 00 in civil work DATE.: PAGE : 1 OF VALID UPTO SUB-ITEM : TYPE OF CHECK QUANTUM/ REFERENCE DOC. FREQUENCY OF AND CHECK ACCEPTANCE STD. 6. 7. 100 Sqm/20 Cum CPWD/IS1124 100 Sqm/20 Cum CPWD/IS1121 100 Sqm/20 Cum CPWD/IS1706 100 Sqm/20 Cum CPWD/IS1126
TO BE FILLED IN BY NTPC PROJECT : MUNPL PO NO. : DATE :
SL. COMPONENTS OF OPERATION CHARACTERISTICS CLASS OF NO. CHECK
FORMAT OF RECORDS
REMARKS
1 1 Stone
2.
3. (i) Water absorption (ii) Transverse strength (iii) Resistance to wear (iv) Durability
4. Lab Lab Lab Lab
*5.
8.
9.
MANUFACTURER/ SUBCONTRACTOR
CONTRACTOR
SIGNATURE
LEGEND : *In column D record identified by NTPC with tick, shall be essentially included by contractor in QA documentation. ** M Manufacturer / Sub-contractor C Nominated Inspection Agency P Perform; V Verification; N NTPC; W Witness; All W in column N shall be CHP of NTPC.
FOR NTPC USE Reviewed By :
DOC NO. Approved By
Name & Designation
NAME & Designation And SEAL
NAME OF AGENCY & ADDRESS :
FIELD QUALITY PLAN
JOB DETAILS :Test required BRICK used in civil work QP NO.: forREV.: 00 DATE.: PAGE : 1 OF VALID UPTO
TO BE FILLED IN BY NTPC PROJECT : PO NO. : DATE :
SL. NO.
COMPONENTS OF OPERATION
CHARACTERISTICS
SUB-ITEM : CLASS OF TYPE OF CHECK CHECK
QUANTUM/ REFERENCE DOC. FREQUENCY OF AND CHECK ACCEPTANCE STD. 6. CPWD/Appendix A,B,C & D of Chapter 6 CPWD/Appendix A,B,C,D CPWD/Appendix A, B, C, D 7.
FORMAT OF RECORDS
REMARKS
1. 1
2. Bricks/Brick Tiles
3. Dimensions, compressive strength, water absorption and efflorescence Dimensions, compressive strength, water absorption Dimensions, Compressive strength, water absorption and efflorescence
*In column D record identified by NTPC with tick, shall be essentially included by contractor in QA documentation. ** M Manufacturer / Sub-contractor C Nominated Inspection Agency P Perform; V Verification; N NTPC; W Witness; All W in column N shall be CHP of NTPC.
Reviewed By :
Approved By
Name & Designation
NAME & Designation And SEAL
NAME OF AGENCY & ADDRESS :
FIELD QUALITY PLAN
JOB DETAILS :Test required Marble used in civil work QP NO.: forREV.: 00 DATE.: PAGE : 1 OF VALID UPTO
TO BE FILLED IN BY NTPC PROJECT : PO NO. : DATE :
SL. NO.
COMPONENTS OF OPERATION
CHARACTERISTICS
SUB-ITEM : CLASS OF TYPE OF CHECK CHECK
QUANTUM/ REFERENCE DOC. FREQUENCY OF AND CHECK ACCEPTANCE STD. 6. 100 Sqm 100 Sqm 100 Sqm 100 Sqm 100 Sqm 7. CPWD/IS 1124 Mhos Scale CPWD/IS1122 CPWD/IS1124 CPWD/IS1122
FORMAT OF RECORDS
REMARKS
1. 1 Marble
2.
3. (i)Moisture absorption (ii) hardness Test (iii)Specific Gravity
4. Lab Lab Lab Lab Lab
*5.
8.
9.
Granite
(i) Moisture (ii) specific Gravity
MANUFACTURER/ SUBCONTRACTOR
CONTRACTOR
SIGNATURE
LEGEND : *In column D record identified by NTPC with tick, shall be essentially included by contractor in QA documentation. ** M Manufacturer / Sub-contractor C Nominated Inspection Agency P Perform; V Verification; N NTPC; W Witness; All W in column N shall be CHP of NTPC.
FOR NTPC USE Reviewed By :
DOC NO. Approved By
Name & Designation
NAME & Designation And SEAL
NAME OF AGENCY & ADDRESS :
FIELD QUALITY PLAN
QP NO.: JOB DETAILS :Test Required for WoodREV.: 00 and P.V.C used in civil work DATE.: PAGE : 1 OF VALID UPTO SUB-ITEM : CLASS OF CHECK TYPE OF CHECK QUANTUM/ REFERENCE DOC. FREQUENCY OF AND CHECK ACCEPTANCE STD. 6. 1 Cum AS per clause 9.7.11/CPWD 100 No. 7. CPWD/AppendixC CPWD/IS2202 CPWD/IS 2209-Appendix G
TO BE FILLED IN BY NTPC PROJECT : PO NO. : DATE :
SL. NO.
COMPONENTS OF OPERATION
CHARACTERISTICS
FORMAT OF RECORDS
REMARKS
1. 1 2 3
2. Timber Flush Door Mortice Locks
3. Moisture Content End immersion test,Knife test,Adhesion test Testing of spring
4.
*5. Field/Lab Lab Lab
8.
9.
MANUFACTURER/ SUBCONTRACTOR
CONTRACTOR
LEGEND :
FOR NTPC USE
DOC NO.
SIGNATURE
*In column D record identified by NTPC with tick, shall be essentially included by contractor in QA documentation. ** M Manufacturer / Sub-contractor C Nominated Inspection Agency P Perform; V Verification; N NTPC; W Witness; All W in column N shall be CHP of NTPC.
Reviewed By :
Approved By
Name & Designation
NAME & Designation And SEAL
NAME OF AGENCY & ADDRESS :
FIELD QUALITY PLAN
QP NO.: JOB DETAILS : Test required for SteelREV.: 00 in civil work DATE.: PAGE : 1 OF VALID UPTO SUB-ITEM : CLASS OF TYPE OF CHECK CHECK
TO BE FILLED IN BY NTPC PROJECT : PO NO. : DATE :
SL. NO.
COMPONENTS OF OPERATION
CHARACTERISTICS
QUANTUM/ REFERENCE DOC. FREQUENCY OF AND CHECK ACCEPTANCE STD. 6. 20 tonne 8 tonne 7. CPWD/IS 1599 CPWD/IS 1608 CPWD/IS 2329 CPWD/IS 2328
FORMAT OF RECORDS
REMARKS
1. 1 2 Steel
2.
3. (i) Tensile Strength (ii) Bend Test (i) (ii) (iii) Tensile Test Bend Test Flattening Test
4. Lab Lab
*5.
8.
9.
Steel tubular pipes
MANUFACTURER/ SUBCONTRACTOR
CONTRACTOR
SIGNATURE
LEGEND : *In column D record identified by NTPC with tick, shall be essentially included by contractor in QA documentation. ** M Manufacturer / Sub-contractor C Nominated Inspection Agency P Perform; V Verification; N NTPC; W Witness; All W in column N shall be CHP of NTPC.
FOR NTPC USE Reviewed By :
DOC NO. Approved By
Name & Designation
NAME & Designation And SEAL
NAME OF AGENCY & ADDRESS :
FIELD QUALITY PLAN
QP NO.: JOB DETAILS : Test required forREV.: 00 Flooring in civil work DATE.: PAGE : 1 OF VALID UPTO SUB-ITEM : CLASS OF Type OF CHECK CHECK
TO BE FILLED IN BY NTPC PROJECT : PO NO. : DATE :
SL. NO.
COMPONENTS OF OPERATION
CHARACTERISTICS
QUANTUM/ REFERENCE DOC. FREQUENCY OF AND CHECK ACCEPTANCE STD. 6. 10000 Nos. 7. CPWD/IS 1237
FORMAT OF RECORDS
REMARKS
1. 1
2. Terrazzo Tiles (iii)
3. (i) Transverse Strength (ii) Abrasion Test Water absorption Dimensions and surface
4. Lab
4.
8.
9.
Pressed Ceramic
(i) (ii) (iii)
Tiles(For floor and wall) quality Physical properties Chemical properties
Lab 3000 Nos. CPWD/IS13630
MANUFACTURER/ SUBCONTRACTOR
CONTRACTOR
LEGEND :
FOR NTPC USE
DOC NO.
SIGNATURE
*In column D record identified by NTPC with tick, shall be essentially included by contractor in QA documentation. ** M Manufacturer / Sub-contractor C Nominated Inspection Agency P Perform; V Verification; N NTPC; W Witness; All W in column N shall be CHP of NTPC.
