Mineral Slag Blasting
Mineral Slag Blasting
Mineral Slag Blasting
SIEVING RANGE
PERFORMANCE CHARACTERISTICS
CODE SIZE RANGE
Profile range m2/hour kg/m2
MINERAL SLAG
VER. 1.1
All statements, technical information and recommendations contained herein are based on tests believed to be reliable but the accuracy and completeness thereof is not guaranteed. Specifications are subject to change without notice.
MATERIAL SAFETY DATA SHEET
SECTION 1 IDENTIFICATION
Product name Blastrite®
Chemical family Mineral Slag
Colour Black
Chemical formula Amorphous Glass, see Section 3 below
Manufacturers name Blastrite (Pty) Ltd
Factory address Waterval Smelter, Anglo Platinum, Rustenburg, South Africa
SECTION 2 PHYSICAL CHARACTERISTICS
Appearance and odour Crystalline particles: no odour
Specific gravity 3.2
Melting point +/-1,280˚ C
Volatiles (% by weight) Not applicable/Inert
Water solubility Not applicable/Inert
SECTION 3 CHEMICAL CHARACTERISTICS
Si02 42% (combined)
Al203 5%
Fe2O3 31%
CaO 6%
MgO 15%
SECTION 4 FIRE AND EXPLOSION DATA
Flashpoint Not applicable
Flammability limits Not applicable
Extinguishing media Not applicable
Unusual fire and explosion hazards Not applicable
Special fire fighting procedures Not applicable
SECTION 5 HEALTH HAZARD DATA
Threshold limit value +/-10mg/m3 as total dust
Effects of over exposure Not applicable
MINERAL SLAG