Vibrodynamics - HH28
DEFINITION
WIRE ROPE ISOLATOR series HH28
• All metal multidirectional anti-vibration/shock mounts
• Exceptional reliability and long life
• High damping
• No aging
• Corrosion resistant
• Unequalled temperature range : - 180°C to 300°C (-290°F to
570°F)
• Great adaptability/versatility
Specials on request
(material size and number of loops, etc.)
Dimensions are in milimeters. For reference only
SERIES MODEL INTERFACES
Materials and finishes height width weight Bar 1
H (mm) W (mm) (kg) fixtures holes D
(meets RoHS requirements) 2 through holes
-16 45 54 0.16 2 through holes ø7mm
2 inserts M6
HH28 ø7mm countersunk
-32 51 61 0.17 Bar 2 90°
Cable:
stainless steel -34 56 69 0.18 2 through holes
TM2 not standard not standard
galvanized available: HHG ø7mm
-36 60 78 0.20
Retainer bars:
2 through holes
aluminium alloy/ -38 60 87 0.21 ø7mm TCM CM2 not standard
SurTec
countersunk 90°
Screws: -40 64 93 0.21
alloy steel/zinc plate 2 inserts M6 TIM CIM IM2
-44 64 98 0.22
Inserts:
stainless steel -46 79 106 0.24
-48 95 127 0.28
All stainless steel: HHSS
Other materials on request
H H 2 8 - 1 6 0 4 C I M
SERIE: HH28 MODEL: -16 LOOPS: 04 INTERFACE: CIM
'Half-Helical' mount
from height: 45mm Serie 2 through holes ø7mm
the HH28 series width: 54mm standard is countersunk 90° in bar 1,
weight: 0.16kg 04 loops 2 inserts M6 in bar 2
PERFORMANCE DATA
WIRE ROPE ISOLATOR series HH28
COMPRESSION AND TENSION
HH28 Series Model -16 -32 -34 -36 -38 -40 -44 -46 -48
F daN 36.7 28.8 22.3 17.2 14.0 11.7 10.9 9.6 7.1
1.Max Static
d mm 3.3 4.3 5.2 5.8 5.8 6.5 6.5 9.0 11.6
F daN 110 86.5 66.9 51.5 42.1 35.2 32.7 28.7 21.3
2.Max Shock
d mm 18 23 27 31 31 35 35 48 63
2a mm 2.0 2.6 3.1 3.5 3.5 3.9 3.9 5.4 6.9
3.Max Vibration
f Hz 9.2 8.0 7.4 7.1 7.3 6.9 7.0 5.7 5.0
F daN 36.7 28.8 22.3 17.2 14.0 11.7 10.9 9.6 7.1
1.Max Static
d mm 2.9 3.6 4.4 5.4 5.8 6.5 6.5 8.4 10.5
F daN 415 315 253 212 202 175 126 119 84.8
2.Max Shock
d mm 13 16 21 28 36 42 40 44 52
2a mm 1.5 1.8 2.4 3.1 4.0 4.7 4.5 4.9 5.8
3.Max Vibration
f Hz 12.0 10.7 9.6 8.6 8.0 7.5 7.5 6.9 6.2
COMPRESSION/ROLL 45° - TENSION/ROLL 45°
HH28 Series Model -16 -32 -34 -36 -38 -40 -44 -46 -48
F daN 27.6 21.6 16.7 12.9 10.5 8.8 8.2 7.2 5.3
1.Max Static
d mm 5.3 6.7 8.2 9.6 10.2 11.5 11.7 14.9 18.9
F daN 73.7 57.5 44.7 34.9 29.2 24.5 22.9 19.5 14.4
2.Max Shock
d mm 27 35 41 47 47 52 52 72 94
2a mm 3.0 3.9 4.6 5.2 5.2 5.8 5.8 8.0 10.4
3.Max Vibration
f Hz 7.8 6.8 6.2 6.0 6.1 5.8 5.8 4.8 4.2
F daN 27.6 21.6 16.7 12.9 10.5 8.8 8.2 7.2 5.3
1.Max Static
d mm 3.7 4.7 5.8 7.1 7.9 8.9 9.2 11.0 13.7
F daN 208 157 126 106 102 88.9 66.2 60.2 42.6
2.Max Shock
d mm 15 19 24 32 41 48 46 50 60
2a mm 1.7 2.1 2.7 3.5 4.6 5.3 5.2 5.6 6.7
3.Max Vibration
f Hz 10.7 9.6 8.6 7.7 7.2 6.7 6.8 6.2 5.6
SHEAR OR ROLL
HH28 Series Model -16 -32 -34 -36 -38 -40 -44 -46 -48
F daN 18.4 14.4 11.1 8.6 7.0 5.9 5.4 4.8 3.6
1.Max Static
d mm 4.4 5.9 7.2 8.4 8.6 9.8 9.9 13.5 17.6
F daN 112 81.9 64.1 52.5 48.8 41.4 34.7 28.3 19.8
2.Max Shock
d mm 18 23 29 35 41 47 46 56 69
2a mm 2.1 2.6 3.2 3.9 4.6 5.3 5.2 6.2 7.6
3.Max Vibration
f Hz 8.8 7.8 7.1 6.5 6.2 5.9 5.9 5.2 4.7
1. Max static load (F) with corresponding deflection (d)
2. Max shock load (F) with corresponding deflection (d)
3. Uncoupled resonant frequency (f) under max static loading 1. and max peak to peak sinusoidal vibration
input (2a)
*IMPORTANT: Performance characteristics are given here for reference only. They can be increased under
specific conditions. Contact us
TYPICAL SHOCK/VIBRATION SPECIFICATIONS:
Air AIR 7306, MIL-E-5400, MIL-C-172, MIL-STD-810
Ground Forces GAM EG13A, SEFT 001, MIL-STD-810, VG 9533
Marine GAM EG13C, IT25-21/96-31/15-86, MIL-S-167, MIL-S-901, STANAG 042, BV 043.73, BV 044
Others GAM EMB1, GAM EMBT4, DEF STAN 07-55, IEC 571, FINABEL 2C
