0% found this document useful (0 votes)
20 views

FT ComputerSmartIII EN

The document describes a smart power factor regulator called Computer SMART III. It can measure power using either 1 or 3 current transformers, offering more measurement options than other regulators. It also functions as a power analyzer and monitors leakage currents. Computer SMART III allows configurable alarms and capacitor testing for preventative maintenance. It is suitable for installations of various sizes and compensation needs.

Uploaded by

Jovan Nikolic
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
20 views

FT ComputerSmartIII EN

The document describes a smart power factor regulator called Computer SMART III. It can measure power using either 1 or 3 current transformers, offering more measurement options than other regulators. It also functions as a power analyzer and monitors leakage currents. Computer SMART III allows configurable alarms and capacitor testing for preventative maintenance. It is suitable for installations of various sizes and compensation needs.

Uploaded by

Jovan Nikolic
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Power Factor regulators

Smart Power Factor regulator


Computer
SMART III
Description
Measurement with three current transformers guarantees an analogue reading of the
company meter. The Computer SMART III reactive energy regulator is the only regulator on
the market that offers the possibility of using 3 measurement transformers in addition to the
conventional method of measuring with a single current transformer, as well as providing the
functions of an integral power analyzer and controlling residual leakage currents.

Computer SMART III is a regulator that ensures excellent preventive maintenance by


means of programming its alarms and the options for testing the capacitor status, offering
maximum supervision and safety of your compensation unit.

Application
The connection of 1 or 3 transformers makes computer SMART III the perfect regulator
in any installation, allowing the following:
—— Changing from 1 to 3 transformers in the following cases:
–– Changes in reactive energy penalties
–– Changes in consumption habits
–– Significant imbalances in the system
—— Replacing the regulator of any capacitor bank
—— Perfect for installations with up to 4 objective cos φ, since it can
—— adapt to any compensation need (different time periods).
—— It can be used with Medium Voltage compensation units.

Technical features
Voltage circuit Power supply voltage 110...480 Vac
Tolerance 10%
Consumption 6 VA
Frequency 45...65 Hz
Measurement circuit Measurement voltage 525 Vac P-P
300 Vac P-N
Current measurement x1 or x3 transformers .../5 A or .../1 A
Leakage current Measurement range I∆prim = 10 mA...1 A AC
Current transformers WGC series
Accuracy Voltage and Current 1%
Cos φ 2% ±1 digit
Temperature Measurement range 0 ºC...80 ºC ±3 ºC
measurement
Alarm relay Output contact Switched
Umax and Imax (operation) 250 Vac / 6 A
Output relay No. of relays 6 or 12, depending on the type
Umax and Imax (operation) 250 Vac / 6 A
Fan relay Output contact Not switched
Umax and Imax (operation) 250 Vac / 6 A
Digital outputs No. of outputs 2
Type NPN transistor
Umax and Imax (operation) 24 Vdc /50 mA
Digital inputs No. of inputs 2
Alarms No. of alarms 17, fully configurable
Communications Port RS-485
Protocol Modbus / RTU
Operating conditions Temperature -20 ºC...+60 ºC
Relative humidity 95% without condensation
Maximum altitude 2,000 m
Control system PFC (Program that minimises the number of operations)
Safety Insulation Category III Class II EN 61010-1
Protection degree IP 40 assembled
IP 30 not assembled, in
accordance with EN-60529
Standards IEC 62053-23 (2003-01), IEC 61326-1, EN 61010-1, UL 508

R3-1
Power Factor regulators

Smart Power Factor regulator


Computer
SMART III
References
Type Code No. relays
Computer Smart III 6 R13851 6
Computer Smart III 12 R13862 12

Dimensions
71 144
7 21.75 5.84

137.6
106

144
Connections

Connection of 3 phases + neutral Connection of 3 phases + neutral


3 current transformers 1 current transformer

A B VL1 VL2 VL3 VLN COM 1 2 3 4 5 6 A B VL1 VL2 VL3 VLN COM 1 2 3 4 5 6

RELAY C1...C6 RELAY C1...C6


L1 L1
L2 L2
L3 L3
N N
RELAY C7...C12 RELAY C7...C12

S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2
IL1 IL2 IL3 IL1 IL2 IL3
7 8 9 10 11 12 7 8 9 10 11 12

Connection of 2 phases +
1 current transformer

A B VL1 VL2 VL3 VLN COM 1 2 3 4 5 6

RELAY C1...C6
L1
L2
L3
N
RELAY C7...C12

S1 S2 S1 S2 S1 S2
IL1 IL2 IL3
7 8 9 10 11 12

R3-2

You might also like