GV65 Series 20210910

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

www.queclink.com sales@queclink.

com +86 21 5108 2965

Compact Size

Multipe I/O Interfaces

1-wire Interface

Scheduled Timing Report

Geo-fences

Motion Detection

Driving Behavior Monitoring

Crash Detection

Power Supply Monitoring

GV65 Series Tow Alarm

Fuel Level Monitoring


Compact multi-interface GNSS trackers for a wide
range of vehicle tracking applications Temperature Monitoring Driver

ID Identify
56g (GV65) 73mm(L) × 54mm(W) × 22.7mm(H)
S
62g (GV65 Plus) Support Virtual Odometer
Operating Voltage: 8V to 32V DC
-30℃ ~ +80℃
Li-Polymer, 250 mAh (GV65 Plus) Up to 10,000 Buffer Messages

The GV65 series includes two compact GNSS trackers designed for a wide variety of vehicle tracking applications. The series
includes multiple digital/analog I/Os that can be used for monitoring or controlling external devices, and has a 1-wire interface
for iButton driver ID or temperature monitoring.

Stolen Vehicle Recovery Transportation Monitoring Fleet Management

Driving Smarter IoT


Queclink Wireless Solutions Co., Ltd.

GV65 Series Models

Position Accuracy Backup


Region Operating Band GNSS Type Certificate
(CEP) Battery

GSM u-blox All-in-One


GV65 Worldwide Autonomous: < 2.5m N/A CE/E-Mark
850/900/1800/1900 MHz GNSS receiver

GSM u-blox All-in-One Li-Polimer,


GV65 Plus Worldwide Autonomous: < 2.5m CE/E-Mark/
850/900/1800/1900 MHz GNSS receiver 250 mAh
Anatel

Interfaces

GNSS Connector

10 PIN Interface

CEL LED
GPS LED
Power LED

1 positive trigger input for ignition detection


Digital Inputs
2 negative trigger inputs for normal use

Digital Output 1 digital output, open drain, 150 mA max drive current

Latched Digital Output 1 digital output with internal latch circuit, open drain, 150 mA max drive current

Analog Input 1 analogue input with selectable input voltage range (0V-12V or 0V-30V)

1-wire Interface Support 1-wire temperature sensor and iButton driver ID

GSM Antenna Internal only

GNSS Antenna Internal antenna and optional external antenna

LED Indicators CEL, GNSS, PWR

Mini USB Interface Used for upgrading and debugging

www.queclink.com [email protected] +86 21 5108 2965


Queclink Wireless Solutions Co., Ltd.

Accessories

1-wire Temperature Sensor


1-wire temperature sensor (DS18B20)
Cable length: 8m

CAN100_INV with Cable


Decodes information from vehicles digital buses CAN
bus and J1708) for tracking device
Power supply voltage: 7V to 36V
Current consumption (operating mode @12V,)6,5 mA
Current consumption (operating mode @24V,)4 mA
Current consumption (sleep mode)below 1 mA
Output current (outputs OUT1, OUT2, OUT3)50 mA
Operating temperature -40℃ ~+80℃
serial port UART compatible
Include UART cable

iButton Kit without AC100


Used for driver ID identification (Dallas keys) Parts list:
iButton reader x 1pc; 1-wire interface
iButton (with handle) x 2pcs Cable length: AC100 1M;
iButton reader 18cm

Active_Buzzer_1M
Active buzzer with 1m cable
Can be drived by the digital output on any GV Series devices

Film_Panic_Button_2M
Film panic button with 2M cable

Relay with Socket


Relay with socket for GV Series
Cable length: 14.5cm
NO/NC 40A/30A (14V DC)
With internal freewheeling diode

Antenna_GPS_SMA_3M
GPS active antenna with SMA type RF conntector
Cable length: 3m

EIO100
Expander for input and output can connect with tracking device through
UART or 1-Wire
Digital input x4 Digital output x4
Cable Length: 1.2m

Power Protection Cable


Power protection TVS cable
Used to improve the anti surge capacity of GV series
Features:
Reverse stand-off voltage: 30V
5000W x 2 peak pulse power capability on 10/1000us waveform

www.queclink.com [email protected] +86 21 5108 2965

You might also like