Scribd
Upload
64 views2 pages

User Manual POST Printer

1) The document provides instructions for installing a mini receipt printer, including installing the driver, setting the printer IP address, and connecting the cash drawer port. 2) It describes how to perform a self-test on the printer by pressing the FEED button during startup. 3) Additional sections cover setting the printing mode, performing cutter maintenance if it gets stuck, and general printer clearance and maintenance.

Uploaded by

Petit-Homme Ben-Jacques
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
64 views2 pages

User Manual POST Printer

1) The document provides instructions for installing a mini receipt printer, including installing the driver, setting the printer IP address, and connecting the cash drawer port. 2) It describes how to perform a self-test on the printer by pressing the FEED button during startup. 3) Additional sections cover setting the printing mode, performing cutter maintenance if it gets stuck, and general printer clearance and maintenance.

Uploaded by

Petit-Homme Ben-Jacques
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Mini Receipt Printer OUTLOOK AND INSTALL PAPER ROLL

Quick Start Guide

Roll paper cover

Control panel

Cutter cover

Cover open button

1 2 3 4 5
USB Port LAN Port

TOOL CHANGE PRINTER IP Add IP PORT FOR DRIVER


(1)Set computer IP to 192.168.1.xxx
(2)Right key receipt printer in Control Panel and
choose “Printer properties”
(3)Click “Ports”and choose “Add Ports...”
1)Double click “Printer Test V3.3C”
(4)Click “Standard TCP/IP Port” and “New Port”

Button name, indicator LED light and function

(5)Click “Next” until this.


2)Setting new printer IP in new IP box “Printer Name or IP”,write down printer IP.
3)Click “Set New IP”,after beep rings,
New IP address Successfully.

Method: When the printer is connect power off ,


press “FEED” button and turn on at the same (6)Click “Next” until “Finish”.Then click “Close”
time, 2 seconds later release “FEED” button,
a completed self test will be printed out to show CASH DRAWER PORT (Rj11 CABLE)
printer settings.

4)Other setting Click”Advanced”


Zy801
STEP 2 - INSTALL DRIVER
Scan For Driver
1) Install driver under WINDOWS OS (Steps as below). 8. Choose the right series, shown as below.

1. Double click driver.

6. Finished.

2. Select: Next.

3. Default installation folder.

7. Choose the right port, shown as below:

10. Choose the detect USB001,click apply, shown as below.

4. Create a shortcut on the desktop.

5. Install by below instruction.

SETTING PRINTING MODE CUTTER STUCK MAINTENANCE CLEARANCE AND MAINTENANCE

Cutter stuck maintenance

You might also like