Trigem Micro-Atx Motherboard Hardware Document: Cognac
Trigem Micro-Atx Motherboard Hardware Document: Cognac
1/16
R&D Center
Hardware Document
Doc_Form# :RPR404-IB1 Board Development Team
Revision
Rev. 0.9
Description
First released version for this document. This document describes the major specification of the Cognac motherboard and the functional feature to be extended by the customer. The motherboard revision number is EVT3(PR1) 1. PCB Rev Up (A C) 2. It is modified in the connector option of M/B
July, 27 1999
Rev. 1.0
Marketing Information
Address Telephone Fax Email
45-2 Yoidodong, Youngdeungpoku, Seoul, Korea 82-2-3774-4251 (International Business Team) 82-2-786-9478 [email protected] (Jin Hyun Park)
1055 Shingil-Dong, Ansan, Kyunggi-Do, Korea 82-345-491-9528 (Ext. 608) 82-345-593-6721 [email protected] (Seung Eung Hong) [email protected] (Young chul Park) [email protected] (Jin Soo Kim)
Technical Support
Address Telephone Fax Email
Users Notice
No part of this product, including the schematics and BIOS may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by any means without the express written permission of TriGem Computer Inc. except the document kept by the purchaser for backup purposes.
2/16
R&D Center
Hardware Document
Doc_Form# :RPR404-IB1 Board Development Team
Contents of Table
I. Introduction 1. Generation Description 2. Function Block Diagram II. System Overview 1. Major Units ----------------------------------------------------------------------------2. Upgrade ability ------------------------------------------------------------------------2-1. Processor -------------------------------------------------------------------------2-2. Main chipset Configuration ---------------------------------------------------2-3. Memory ----------------------------------------------------------------------------2-4. BIOS --------------------------------------------------------------------------------2-5. Expansion Slot -------------------------------------------------------------------2-6. Advanced Configuration and Power Interface (ACPI) ------------------2-7. Manufacturing Options ---------------------------------------------------------III. Jumper & Connector Description 1. Motherboard Jumper Setting -----------------------------------------------------1-1. Selection for Processor CPU Clock -----------------------------------------1-2. Other functionality --------------------------------------------------------------1-3. PCI graphics device function ------------------------------------------------1-4. OEM/ODM selector -------------------------------------------------------------2. Motherboard Connector Description --------------------------------------------2-1.Motherboard Internal Connector --------------------------------------------2-2.Motherboard External I/O Port -----------------------------------------------11 11 11 12 12 14 14 16 7 8 8 9 8 9 9 10 10 ----------------------------------------------------------------------------------------------------------------------4 6
3/16
R&D Center
Hardware Document
Doc_Form# :RPR404-IB1 Board Development Team
I.
Introduction
The COGNAC Micro ATX motherboard offers a time to market consumer and corporate desktop solution featuring the Intel Celeron PPGA processor with 66/100MHz front side bus and the Whitney chipsets in a Micro ATX low profile motherboards. In addition, the integrated onchip graphics controller supports 4MB of SDRAM purpose of Display cache memory. The Cognac motherboard was designed to be highly minimized system cost. In this effort a smaller form factor, Micro-ATX, gives the greater space economy and more affordable systems. Integrating onchip graphics controller and SDRAM, as well as onchip AC97 audio solution with AC97 Codec onto the motherboard eliminates the need for more expensive graphic and audio add-in cards. The end result is a system platform with a primary component level of integration with translates into affordable solution for entry level users.
1. General description
Motherboard Small PCB size in the Micro ATX form factor (ATX V1.2 form factor) 238mm * 238mm * 1.6t (4 Layers) Processor Intel Socket-370 (370pin PPGA Socket) - Intel Celeron 400/433/466/500MHz processor @66MHZ Host clock - Intel TBD @100MHZ Host clock Main Chipset Graphics and Memory Controller Hub (GMCH) : Intel FW82810-DC100 / FW82810 I/O Controller Hub (ICH) : Intel FW82801AA / FW82801AB AC 97 Controller : Intel FW82801AA/AB included Audio Codec : Cirrus CS4299-JQ Super I/O : ITE IT8702F-A DC-DC Converter : HARRIS HIP6021CB Clock : ICS 9250BF-10 (66/100MHz host clock, 100Mhz SDRAM Clock support) Memory Configuration System Memory - Two banks of 3.3V SDRAM (168pin unbuffered DIMM) with max 256MB - SDRAM operation in 100MHz front side bus Display Cache Memory - Two 1M*16 3.3V SDRAM (4MB) - SDRAM operation in 100MHz Flash Memory - Intel N82802AB, 4Mb PLCC Type - FirmWare Hub(FWH) Interface for platform operation - Address/Address Multiplexed Interface for programming during manufacturing I/O Feature Integrated standard I/O functions in the rear side - One multi-mode parallel port - One FIFO serial ports and optional port by header type - PS/2 styles keyboard and mouse port - Two USB port - Three audio jack for Speaker output ,Line input and MIC input - One Joystick port I/O Controller (IT8702F-A) - Low Pin Count (LPC) interface with Host controller(ICH) - FDC, Parallel, Serial, keyboard/Mouse supported - Joystick port and MPU-401 compatible MIDI interface Audio Subsystem Intel 82801AA/AB AC97 Audio/Modem controller Independent channels for PCM in and PCM out, Microphone in
4/16
R&D Center
Hardware Document
Doc_Form# :RPR404-IB1 Left and Right audio channels 16 bit sample resolution multiple sample rates AC97 2.1 compliant AC-link interface Board Development Team
GMCH Subsystem Host/Memory(DRAM) Controller features - 66/100Mhz System Bus Frequency - 100Mhz system memory bus frequency - Refresh mechanism: CBR only supported - Support for Asymmetrical DRAM addressing only - Support for Asymmetrical DRAM addressing only - Support for 64-bit data interface - Suspend to RAM support Graphics Controller features - 3D Hyper Pipelined Architecture ( PDP, PPI) - full 2D H/W Acceleration - Motion Video Acceleration - H/W motion Compensation Assistance for S/W MPEG2 Decode - Software DVD at 30fps 3D Graphics features - Flat & Gouraud Shading - Mip Maps with Bilinear and Anisotropic Filtering - Fogging Atmospheric Effects - Z Buffering - 3D Pipe 2D Clipping - Backface Culling - Per Pixel Perspective Correction Texture Mapping - Texture Compositing - Texture Color Keying/Croma Keying Display features - Integrated 24-bit 230Mhz RAMDAC - Gamma Corrected Video - DDC2B Compliant Graphics memory controller features - Intel D.V.M Technology (Dynamic Video Memory) Display Cache Interface (FW82810-DC100 only) ICH Subsystem PCI Bus Interface Integrated IDE controller USB AC97 Link for Audio and Modem Interrupt Controller Low Pin Count Interface SM Bus Firmware Hub Interface
GMCH,ICH vs GMCH0,ICH0 Configuration Difference GMCH0, ICH0 GMCH, ICH No Display Cache (4MB) Support Display Cache (4MB) Support Up to Ultra 33 ATA Spec. Support Up to Ultra 66 ATA Spec. Support 4 PCI Slots Support 6 PCI Slots Support N/A Alert on LAN Support Note : Pavilion 6530/6535 uses the GMCH0, ICH0
5/16
R&D Center
Hardware Document
Doc_Form# :RPR404-IB1 Board Development Team
SDRAM
2M
HD
HA
DCMA DCMA
DCMD Video
DCMD RGB
HDD
PCI Slot
CDROM
Speaker
Code c
MIC Line in
CS4299
FWH
I/O
IT8702F
Joystick Midi
II.
System Overview
6/16
R&D Center
Hardware Document
Doc_Form# :RPR404-IB1 Board Development Team
1.
Major Units
82802AB(ROM)
RTC Battery
IT8702
FDD CONNECTOR
7/16
R&D Center
Hardware Document
Doc_Form# :RPR404-IB1 Board Development Team
2.
2-1.
Upgradeability
Processor
COGNAC motherboard provides the 370pin PGA370 socket that is not backward compatible with ZIF socket-7 processors The Processors VID pins automatically program the voltage regulator on the motherboard to the required processor voltage. The motherboard supports processors that run internally at 300/333/366/400 /433/466/500MHz. Supported Intel Celeron Processors (PPGA Socket Type) Host Clock 66MHz : Celeron 400MHz : Celeron 433MHz : Celeron 466MHz : Celeron 500MHz : tbd Host Clock 100MHz : tbd Supported Cyrix Goby Processors (PPGA Socket Type) Host Clock 66MHz : tbd
2-2.
Cognac Motherboard has two main chipset configurations. 810DC100 Configuration GMCH + ICH : FW82810DC100 + FW82801AA 810L Configuration GMCH0 + ICH0 : FW82810 + FW82801AB Its applied to Cognac, Cognac+
2-3.
Memory
The motherboard has two, dual inline memory module (DIMM), minimum 16MB to maximum 256MB memory size. The BIOS can automatically detect the memory type, size, and speed through SMBUS interface between the core chipset and DIMM module. The motherboard supports the following memory features 3.3V and unbuffered168-pin DIMM Voltage detection 3.3V Version Unbuffered detection Unbuffered Buffered 100MHz unbuffered SDRAM (PC100) Non-ECC memory only Single or double-sided DIMM with the following types (per each side of each DIMM) DIMM size 8MB 16MB 32MB 32MB Non-ECC memory 4*(1M * 16 bit) 8*(2M * 8 bit) 4*(4M * 16 bit) 2*(4M * 32 bit) DIMM size 64MB 64MB 128MB Non-ECC memory 8*(8M * 8 bit) 4*(8M * 16 bit) 8*(16M * 8 bit) 5V Version
8/16
R&D Center
Hardware Document
Doc_Form# :RPR404-IB1 Board Development Team
2-4 BIOS
The motherboard uses a TriGem-Phoenix BIOS, which is stored in flash memory and can be upgraded using a disk-based program. A new version of the BIOS can be upgraded from a diskette using the Flash Memory Update utility. Flash memory organization Address (Hex) FFFF0000 - FFFFFFFF FFF82000 - FFFEFFFF FFF80000 - FFF81FFF On-board device management The BIOS can manage the devices on the motherboard over the CMOS setup menu. Device Description CMOS setup menu PS/2 Mouse Intel 82801AB (ICH) Enabled / Disabled / Auto Detect Legacy USB Intel 82801AB (ICH) Enabled/ Disabled AC97 Audio ICH with CS4299 Codec Enabled / Disabled On board FDC Super I/O (ITE8702) Enabled / Disabled On board serial A Super I/O (ITE8702) Enabled / Disabled On board serial B Super I/O (ITE8702) Enabled / Disabled On board parallel Super I/O (ITE8702) Enabled / Disabled Midi port Super I/O (ITE8702) Enabled / Disabled / Auto Game port Super I/O (ITE8702) Enabled / Disabled / Auto Default value Auto Detect Disabled Enabledd Enabled Enabled Disabled Enabled Auto Auto Size 64KB 440KB 8KB Functional description Boot block Main BIOS block ESCD block
2-5.
Expansion Slot
The motherboard support PCI and GMCH function. PCI functions are extended to the additional slot with 3 PCI, and GMCH function is designed in the motherboard with Integrated System/Graphics controller. PCI configuration space map Bus number 00 00 00 00 00 00 00 00 00 00 00 01 01 01 Device number 30 31 31 31 31 31 31 31 31 00 01 0E 0D 0C Function number 00 00 01 02 03 04 05 06 07 00 00 00 00 00 Device Intel 82801AB(ICH0) PCI Bridge Intel 82801AB(ICH0) LPC Bridge Intel 82801AB(ICH0) Bus master IDE Intel 82801AB(ICH0) USB Host Controller Intel 82801AB(ICH0) SM Bus Controller Reserved Intel 82801AB(ICH0) AC97 Audio Controller Intel 82801AB(ICH0) AC97 Modem Controller Reserved Intel 82810(GMCH0) System/Graphics Controller Intel 82810(GMCH0) Internal Graphics Device PCI slot1 PCI slot2 PCI slot3
9/16
R&D Center
Hardware Document
Doc_Form# :RPR404-IB1 Board Development Team
PCI interrupts & Master Number Routing Maps Intel 82801AB (ICH0) PCI bridge has four programmable interrupt request input signals. Any PCI interrupt source connects to one of these interrupt signals and Its assigned to the free proper interrupt number by PnP BIOS. ICH INT signals PIRQA PIRQB PIRQC PIRQD Master IDSEL ICH INT signals PIRQA PIRQB PIRQC PIRQD Master IDSEL First PCI slot INTA INTB INTC INTD REQ0 AD30 ICH0 AC97 Audio Second PCI slot INTB INTC INTD INTA REQ1 AD29 ICH0 AC97 Modem Third PCI slot INTC INTD INTA INTB REQ2 AD27 ICH0 USB device ICH0 SM Bus
INTC
INTB
INTB
INTB
INTA
10/16
R&D Center
Hardware Document
Doc_Form# :RPR404-IB1 Board Development Team
III.
1.
J1 J8
1-1. Selection for Processor CPU Clock Intel Celeron PPGA Processor is auto set the core to bus frequency ratio. 1-2. System functionality (J1,2,3,4,5,8 is TG Option)
Function Clear CMOS Audio Function(AMR) Primary Down * Note : Pavilion 6530 uses J6,7 Pavilion 6535 uses J6 DIP Switch J6 J7 1-2(Default) Disable Enable 2-3 Enable Disable
11/16
R&D Center
Hardware Document
Doc_Form# :RPR404-IB1 Board Development Team
These jumpers (J1, J2 & J3) will be optional parts for the OEM/ODM logo message selector of Trigem.
J2(2-3), J3(2-3),J4(2-3) J2(2-3), J3(1-2), J4(2-3) J2(1-2), J3(2-3), J4(2-3) J2(1-2), J3(1-2), J4(2-3)
J2(2-3), J3(2-3),J4(1-2) J2(2-3), J3(1-2), J4(1-2) J2(1-2), J3(2-3), J4(1-2) J2(1-2), J3(1-2), J4(1-2)
12/16
R&D Center
Hardware Document
Doc_Form# :RPR404-IB1 Board Development Team
JOY_USB (CN72)
HPD INDICATOR(CN73)
TG INDICATOR(CN48)
CN53
Pin number 1 2 3
Pin number 1 2 3
13/16
R&D Center
Hardware Document
Doc_Form# :RPR404-IB1 Board Development Team
Pin 4 5 6
Signal description VCC GD(4) GD(0) GND GND GD(1) GD(5) VCC GND Negative DATA
Pin 9 10 11 12 13 14 15 16 3 4
Signal description VCC GD(6) GD(2) MIDI OUT GD(3) GD(7) MIDI IN Key Positive DATA VCC
Pin 1 2
Pin 3 4
Signal description MIC GND MONO OUT Signal description MONO IN GND
Pin 4 5
Pin 1 2
Pin 3 4
Pin 1 2
Pin 3 4
Pin 1 2
Pin 3 4
14/16
R&D Center
Hardware Document
Doc_Form# :RPR404-IB1 Board Development Team
Pin 1 2
Pin 3
Pin 1 2
Pin 3
Pin 1 2 3 4 5 6 7 8
Signal description NC GND LED POWER NC LED POWER HDD access signal GND Power-ON switch signal
Pin 1 3 5 7
Signal description Key lock Signal to Super I/O Key GND Sleep Function signal
Pin 2 4 6 8
15/16
R&D Center
Hardware Document
Doc_Form# :RPR404-IB1 Board Development Team
Joystick port
Mic in
Trademarks Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation.
16/16
R&D Center