Scribd
Upload
98 views1 page

TG19264A (L) : Tinsharp Electronics Co - LTD

1. This document provides specifications for an LCD module including its dimensions, pin configurations, electrical characteristics, and block diagram. 2. The module has a viewing area of 104mm x 39mm with 192 x 64 dots at a pitch of 0.508mm x 0.508mm. It operates at a supply voltage of 4.75-5.25V for logic and 0-15V for the LCD. 3. The 20-pin connector includes data, clock, enable signals, chip selects, and power supply pins. Maximum current draw is 150mA with backlight on.

Uploaded by

Canh Luongtien
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
98 views1 page

TG19264A (L) : Tinsharp Electronics Co - LTD

1. This document provides specifications for an LCD module including its dimensions, pin configurations, electrical characteristics, and block diagram. 2. The module has a viewing area of 104mm x 39mm with 192 x 64 dots at a pitch of 0.508mm x 0.508mm. It operates at a supply voltage of 4.75-5.25V for logic and 0-15V for the LCD. 3. The 20-pin connector includes data, clock, enable signals, chip selects, and power supply pins. Maximum current draw is 150mA with backlight on.

Uploaded by

Canh Luongtien
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

TG19264A(L) TINSHARP ELECTRONICS CO.

LTD
EXTERNAL DIMENSIONS AND DISPLAY PATTERN

MECHANICAL DATA (Nominal dimensions) PIN CONFIGURATION

ITEM SPECFICATION UNIT ITEM SYMBOL Level Function


Module Size( WxH ) 130.0X65.0 mm 1 VSS 0V 0V
2 VDD 5.0V +5V
Viewing Area( WxH ) 104.0X39.0 mm
3 V0 -- Operation Voltage for lcd
Internel Area( WxH ) 97.49X32.46 mm L:Instruction code input
4 D/I H/L
Dot pitch( WxH ) 0.508X0.508 mm H:Data input
Dot Size(WxH ) 0.458X0.458 mm H:Data read
5 R/W H/L
L:Data write
DOTS 192x64 dot
6 E H,H/L Enable signal
Absolute Maximum Ratings 7-14 D0-D7 H/L Data bus line*
Standard Value 15 CS1 L Chip select signal
Item Symbol Condition unit
min max 16 RET L RESET Signal
17 CS2 L Chip select signal
Supply Voltage for Logic VDD-VSS 0 6.7 V
18 CS3 L Chip select signal
Supply Voltage for LCD VDD-VEE Ta=25℃ 0 15 V Negative Voltage for LCD
19 Vee -10V
Input Voltage V1 0 VDD V driving
20 LED+ +5.0V The LED supply
ELECTRICAL CHARACTERISTICS Power supply

Standard value
Item Symbol Condition Unit
min. typ. max.
Supply Voltage
VDD-VSS - 4.75 5.0 5.25 V
for Logic
Supply Voltage
VDD-V0 - 0 12.0 15.0 V
for LCD
Input high
VIH - 0.7VDD - VDD V
Voltage
Block diagram
Input low
VIL - 0 - 0.3VDD V
Voltage
Supply Current
VOH -IOH=0.2mA - 15.0 - mA
for Logic
Supply Currrent
VOL IOL=1.2mA - 4.0 - mA
for LCD
With B/L ILED VDD=5.0V - 150 - mA
Drive method 1/64Duty 1/9Bias

PDF created with FinePrint pdfFactory trial version http://www.fineprint.com

You might also like