Scribd
Upload
50 views

SolidWorks Tutorial

This document provides an overview of the basics for using SolidWorks software to design 3D parts. It explains how to start a new part file, use the design tree and sketch tools to create 2D sketches on different planes, and then extrude those sketches to add thickness and create 3D features. It also describes how to use additional tools like fillets, chamfers, holes and cut features to further refine the part design. The tutorial concludes by demonstrating how to add text and imported images to the part design.

Uploaded by

hermanto
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
50 views

SolidWorks Tutorial

This document provides an overview of the basics for using SolidWorks software to design 3D parts. It explains how to start a new part file, use the design tree and sketch tools to create 2D sketches on different planes, and then extrude those sketches to add thickness and create 3D features. It also describes how to use additional tools like fillets, chamfers, holes and cut features to further refine the part design. The tutorial concludes by demonstrating how to add text and imported images to the part design.

Uploaded by

hermanto
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 31

Basics of

SolidWorks Tutorial
This is your screen when you start a new part
The Design Tree lets
select and modify
sketches and features

Units can be changed in


the bottom-right corner
To begin designing your part, select a plane using the Sketch tool
Tools within the Sketch Tab

Dimensions Modify Lines and Create Patterns

Lines, Curves, and Shapes


Start with basic
shapes using the line,
rectangle, circle, and
arc tools
Shift-click on lines
to add constraints
Use the Fillet tool to
round your corners
Using the Smart Dimension
Tool, add measurements to
your lines
Under the Features Tab, select Extruded
Boss/Base to add depth to your sketch
Tools within the Feature Tab

Extrusion Tools used


to add volume from Specialty Tools
sketches
Cutting tools used to
remove volume
Use the Fillet Tool to round the edges
Right-click on a surface
to begin a new sketch
Use the view selector
to rotate the part for
a better view
Use the Convert Entities tool to
add lines to the sketch surface
You can use Trim Entities to remove unwanted lines
Fillet the corners and add dimensions to the sketch
Use Extruded Cut to
remove part of the object
Select the Chamfer tool under Fillet
Using the chamfer tool, select
either the face, or individual lines
Create a new sketch
Use the Text tool to write
your name on the part

Don’t forget to uncheck this box


Select Font to
adjust the style and
size of your text
Use Extruded Boss/Base to add depth
To add a picture into your sketch,
use the Sketch Picture Tool
Resize and place your image
Trace over your image using lines, arcs, and shapes
Then extrude the sketch
Your finished part should
look something like this
Save a copy of your part as
a .STL file for 3-D Printing

You might also like