Scribd
Upload
55 views2 pages

Specification

The document provides specifications for an absolute encoder model ENA 58/10S-360BCD/8-30V/3M/R, including: 1. Mechanical specifications such as dimensions, bearing life, torque, runout, and material. 2. Electrical specifications like input voltage, output voltage/current, frequency response, accuracy, and interface. 3. Environmental specifications for operating temperature, storage temperature, protection, and certifications. 4. Wire color code details for the output signals.

Uploaded by

Naveen Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
55 views2 pages

Specification

The document provides specifications for an absolute encoder model ENA 58/10S-360BCD/8-30V/3M/R, including: 1. Mechanical specifications such as dimensions, bearing life, torque, runout, and material. 2. Electrical specifications like input voltage, output voltage/current, frequency response, accuracy, and interface. 3. Environmental specifications for operating temperature, storage temperature, protection, and certifications. 4. Wire color code details for the output signals.

Uploaded by

Naveen Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

SPECIFICATIONS FOR ABSOLUTE ENCODER

(Model. ENA 58/10S-360BCD/8-30V/3M/R)


Ordering Informa on
ENA Body Dia Sha Dia Moun ng PPR O/P CODE Supply Voltage Wire Length Cable
Entry

Absolute 58mm 6 = ɸ6mm Loca ng Dia=36mm 360 BIN=Binary 5V=5Vdc (TTL) 1M = 1Meter - = Axial
Moun ng = M4 x up to
10 = ɸ10mm 3No’s on 48mm 11Bit BCD=BCD 8-30V=8-30Vdc 2M = 2Meter R = Radial
PCD at 120° (2048) (HTL)
6H = ID ɸ6mm G=GREY 3M = 3Meter
(Hollow Sha Blind
Bore) (free end)

6HT= ID ɸ6mm
(Hollow Sha
Through Bore

Mechanical:
1. Weight : 400 Gms (appx.)
2. Bearing Life : ≥ 2x109 Revolu ons
(2500 rpm at 10% rated load)
3. Star ng Torque : ≤ 5 Ncm
4. Running Torque : < 2 Ncm
5. Radial Play : ± 0.10 (max.)
6. End Play : ± 0.02 mm (max.)
7. Sha Runout : 30 Micron (max.)
8. Moment of Iner a : 30 gcm2
9. Direc on of rota on of sha
for increasing Count : Clock wise (sha side view)
10. Sha loading : 40N Axial, 110N Radial
11. Sha Material : SS-304
12. Housing Material : Aluminum-anodized finish (grade 6063-T6)
13. Cover Material : Aluminum-Powder Coated Paint finish
(grade 1100-H14)
Electrical :
1. Input Voltage : 8-30Vdc (± 5%)
2. Supply Current (No load) : 110 mA. (approx.)
3. Output Voltage : >22 Vdc Pulses (if supply Vtg =24vdc)
4. Output Waveform Configura on : Square wave, parallel output on 10-wires.
5. Rise me, Fall me : 300 nsec.
6. Output signal amplitude
Logic ‘1’ : ≥ 22V (20mA. Loading)
Logic ‘0’ : ≤ 0.1V
7. Opera ng speed : 2,000 RPM
8. Freq. response : 20 KHz.
9. Accuracy/Least count : 10.54 Minute
10. Interface : Parallel
11. Resolu on : 9-BIT (360 Count/Turn)
12. Output Code : BCD Code
13. Illumina on Source : Infra-red LED
14. Output Current : 20 mA max. each output.

Environmental :
1. Opera ng Temperature : 0 to 60°C
2. Storage Temperature : 0 to +65°C
3. Protec on (Electrical) : Reverse Polarity Protec on & Output Short Circuit Protec on
4. Protec on (Ingress) : IP-64
5. Shock : DIN EN 60068-2-27
6. Vibra on : DIN EN 60068-2-6
7. Humidity : DIN EN 60068-2-3, 95% RH Non-condensing

Cer fica on CE cer fied

WIRE DETAIL

WIRE COLOR CODE SIGNAL

BROWN +Ve (18-28Vdc)


WHITE 0VOLT
BLACK U-1
RED U-2
PINK U3
YELLOW U-4
GREEN T-1
BLUE T-2
VIOLET T-3
GREY T-4
RED/BLUE H-1
GREY/PINK H-2

You might also like