PUMPS

4X5
CENTRIFUGAL PUMPS
BEST-IN-CLASS FEATURES
• A lightweight, compact, extremely • Change of rotation may be easily
rugged pump requiring minimal accomplished by simply removing,
mounting space. turning and positioning the volute,
and changing the impeller.
• A cast steel frame and mounting
bracket for horizontal or vertical • The open impellers allow the free
positioning. movement of large particles and
extremely heavy, abrasive laden
• Every frame is pre-drilled to accept
slurries.
a direct drive SAE “B” hydraulic
motor, in conjunction with OPI’s • The impellers are secured to the
internal splined shaft to eliminate shaft by a superior designed locking
down time due to misalignment. system.
A key driven shaft is also available.
• We offer two packing choices.
• Segmented construction allows the Solid lip seals provide efficient
customer to purchase only those service with a minimum amount
parts necessary for repair. of attention. Split compression is
available for more severe service
• Sacrificial front and rear wear plates
conditions, and can easily be
are provided with every new pump.
replaced without dismantling the
Steel plates are normally provided,
pump.
although rubber coated plates are
available. • Bearings are double row inboard
for radial thrusts, and a single row
outboard for axial thrusts.
SPECIFICATIONS
250 250
240 240
230 230
220 220
210 210
200 200
NET POSITIVE SUCTION HEAD REQUIRED (FEET)

190 190
180 180
170 170
56% EFF
160 160
TOTAL HEAD (FEET)

60%
150 150
46%
140 140
70%
130 130
120 73% 120
2400
110 110
100 100
2200
90 90
30 BHP
2000
80 80
70 1800 70
25 BHP
60 60
20 BHP
1600
50 50
15 BHP
40 1400 RPM 40
10 BHP
30 30
5 BHP
20 20
NPSH
10 10
0 0
0 100 200 300 400 500 600 700 800 900 1000 1100 1200

FLOW (GPM)

CONNECT WITH US | gdenergyproducts.com | 1-866-GDPumps | +1-918-GDPumps