Scribd Logo
Upload

Welcome to Scribd!

  • 513 views

    90mm 316l Peeled and Polished

    Uploaded by

    B.M Industrial Works
    This inspection certificate provides details on a heat of grade 1.4401/1.4404 stainless steel bars. The bars have a diameter of 90 mm, length between 3.00-3.10 meters, and total weight of 0.316 metric tons. Chemical and mechanical test results confirming the steel composition and properties are within specification requirements. The material was ultrasonically tested and is certified to meet various international standards for stainless steel.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    90mm 316l Peeled and Polished

    Uploaded by

    B.M Industrial Works
    513 views1 page
    This inspection certificate provides details on a heat of grade 1.4401/1.4404 stainless steel bars. The bars have a diameter of 90 mm, length between 3.00-3.10 meters, and total weight of 0.316 metric tons. Chemical and mechanical test results confirming the steel composition and properties are within specification requirements. The material was ultrasonically tested and is certified to meet various international standards for stainless steel.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This inspection certificate provides details on a heat of grade 1.4401/1.4404 stainless steel bars. The bars have a diameter of 90 mm, length between 3.00-3.10 meters, and total weight of 0.316 metric tons. Chemical and mechanical test results confirming the steel composition and properties are within specification requirements. The material was ultrasonically tested and is certified to meet various international standards for stainless steel.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    513 views1 page

    90mm 316l Peeled and Polished

    Uploaded by

    B.M Industrial Works
    This inspection certificate provides details on a heat of grade 1.4401/1.4404 stainless steel bars. The bars have a diameter of 90 mm, length between 3.00-3.10 meters, and total weight of 0.316 metric tons. Chemical and mechanical test results confirming the steel composition and properties are within specification requirements. The material was ultrasonically tested and is certified to meet various international standards for stainless steel.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    852-1 %)Inspection Certificate 3.

    1 According To EN 10204 : 2005


    CONSIGNEE METALMAN (INDIA) Test Certificate No. : 170229
    SHOP NO.6/A, GROUND FLOOR, 22/26 Date of Issue : 26.05.2022
    SINDHI LANE, MUMBAI – 4000 04 P. O. No. & Date : -
    Invoice No. : LSL/22-23/1010
    Invoice Date : 26/05/2022

    Supply Process Length Weight Stamp of


    Heat No. Grade Size Product Tolerance Pcs
    Condition Route (Meter) (Mt.) Engineer
    1.4401/
    Bright
    1.4404 90 Peeled & EIF-AOD –
    22L0689 Round 3.00-3.10 h11 2 0.316
    316/ mm Polished CCM
    316L Bars

    CHEMICAL COMPOSITION (%)


    C Mn Si S P Cr Ni N Mo
    0.022 1.43 0.56 0.018 0.038 16.92 10.02 0.0590 2.02

    MECHANICAL TEST RESULT - Test Condition : Solution Annealed


    Impact, Joules
    Tensile
    Charpy - 2 mm V Notch,
    Proof Strength, Strength, Hardness
    Parameter Elongation Reduction Direction - Longitudinal
    N/MM2 ASTM EN ISO Test Method :- EN ISO 148-1,
    % of Area %
    A370 6506-1 HBW Test Temperature- 20° C
    0.2% (Rp 0.2) N/MM2 I II III Average
    Results
    265 637 57.10 73.12 165-168 270 274 272 272

    METALLURGICAL TEST RESULT


    JOMINY HARDENABILITY NON METALLIC INCLUSION RATING GRAIN
    IS 3848 ASTM E-45 MACRO TEST
    SIZE
    PARAMETER ASTM
    DISTANCE A B C D ASTM
    J1 J2 J3 J4 TYPE E 381
    MM /INCH T H T H T H T H E 112
    RESULT HRC - - - - RESULT - - - - - - - - - -

    Remarks:
     Material is ultrasonically tested as per ASTM A388 & found Satisfactory.
     The material is free from Radioactive contaminations.
     Lead has not added during manufacturing.
     IGC test as per ASTM A262 Practice E & found OK.
     Material confirms the requirements as per NACE MR 0175-2015 & NACE MR 0103-2015.
     Material confirms the requirements as per ASTM A276, ASTM A182, ASME SA479
     Material is as per AD 2000-MERKBLATT WO CERTIFICTAE NO. 07/ 203/1409/WP/1414/22 & PED 2014/68/EU CERTI NO
    07/202/1409/WZ/ 1414/22
     Reduction ratio = 6:1
    For Laxcon Steels Limited.
    We here by certify that above material described herein has been
    manufactured and tested with satisfactory results in accordance with
    the Specification & requirements
    Authorized Signatory (Q.C.)

    You might also like