Scribd
Upload
187 views2 pages

Post Processes Modification Is Required For FeatureCAM

The documents discuss issues with post processors in FeatureCAM and modifications required for post processes in PowerMill. It is noted that customizing or modifying post processors is now the responsibility of the reseller rather than Autodesk directly. Links are provided to articles on finding, customizing, or purchasing post processors for various Autodesk CAM software and working with resellers on post processor issues.

Uploaded by

komal katke
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
187 views2 pages

Post Processes Modification Is Required For FeatureCAM

The documents discuss issues with post processors in FeatureCAM and modifications required for post processes in PowerMill. It is noted that customizing or modifying post processors is now the responsibility of the reseller rather than Autodesk directly. Links are provided to articles on finding, customizing, or purchasing post processors for various Autodesk CAM software and working with resellers on post processor issues.

Uploaded by

komal katke
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Post processes modification is required for FeatureCAM.

The issue regarding post processors in the Hindi language.

How to find, customize, or purchase Post Processors for PowerMill,


PartMaker, PowerInspect or FeatureCAM.

https://knowledge.autodesk.com/support/powermill/troubleshooting/
caas/sfdcarticles/sfdcarticles/How-to-deal-with-post-processor-requests-
for-Powermill-and-Featurecam.html

Thank you for contacting Autodesk Customer Support. 


 
Unless I'm mistaken, post-processor requests and customization are now the responsibility of the
reseller, as this is a service that we no longer provide at Autodesk.

Please see this article:

https://knowledge.autodesk.com/support/powermill/troubleshooting/caas/sfdcarticles/sfdcarticles/
How-to-deal-with-post-processor-requests-for-Powermill-and-Featurecam.html

Of course, if you are unable to do this, perhaps the post-processor team can assist.

I hope this helps.


 
Kind regards,

Thank you for contacting Autodesk Customer Support.

My name is Jagdish, and I will be assisting you with your service request.
As per the telephonic discussion, my understanding is that you need to modify the Post processes for
PowerMill 4th axis.

We had a good discussion on the call, but we are not connecting remote sessions because you do not
have a permit.

I have informed you that the post-processor requests and customization are now the responsibility of
the reseller, as this is a service that we no longer provide at Autodesk.

Please see this article: How to find, customize, or purchase Post Processors for PowerMill, Part Maker,
Power Inspect, or FeatureCAM.

Of course, if you are unable to do this, perhaps the reseller or post-processor team can assist.

I hope this helps.


 
Kind regards,
We are having some issues with Post Processing. Please support us to solve the issue.

Thank you for contacting Autodesk Customer Support.

My name is Jagdish, and I will be assisting you with your service request.
As per the TeamViewer session, my understanding is that you are having some issues with Post
Processing multi axis drilling toolpath.

We have a good discussion on call, you informed me that the toolpath taking the wrong position on
the machine. I have checked your project your toolpath creation process is ok, I also suggested to you
tried to calculate the toolpath by using the output workplane.

If you st

We had a good discussion on call, and I have informed you that the post-processor requests and
customization are now the responsibility of the reseller, as this is a service that we no longer provide
at Autodesk.

Please see this article: How to find, customize, or purchase Post Processors for PowerMill, Part Maker,
Power Inspect, or FeatureCAM.

Of course, if you are unable to do this, perhaps the reseller or post-processor team can assist.

I hope this helps.

Thank you for contacting Autodesk Customer Support.

My name is Jagdish, and I will be assisting you with your service request.
As per the TeamViewer session, my understanding is that you are having some issues with Post
Processing multi axis drilling toolpath.

We have a good discussion on call, you informed me that the toolpath taking the wrong position on
the machine. I have checked your project your toolpath creation process is ok, I also suggested to you
tried to calculate the toolpath by using the output workplane.

If you still facing the issue so please connect to our reseller team, I have informed you that the post-
processor requests and customization are now the responsibility of the reseller, as this is a service
that we no longer provide at Autodesk.

Please see this article: How to find, customize, or purchase Post Processors for PowerMill, Part Maker,
Power Inspect, or FeatureCAM.

Of course, if you are unable to do this, perhaps the reseller or post-processor team can assist.

I hope this helps.

You might also like