Scribd
Upload
171 views1 page

Dynamic Pass Box

The STARK Dynamic Pass Box consists of a blower/motor assembly and filter assembly to aid in controlling the ingress of particulate contaminants into clean rooms and between classified areas. It features a HEPA filter, centrifugal motor/blower, differential pressure gauge, stainless steel double-walled doors with glass view panels, and maintains ISO Class 5 air cleanliness and low noise levels. The Dynamic Pass Box can be customized to different sizes as required.

Uploaded by

Sahil Jadhav
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
171 views1 page

Dynamic Pass Box

The STARK Dynamic Pass Box consists of a blower/motor assembly and filter assembly to aid in controlling the ingress of particulate contaminants into clean rooms and between classified areas. It features a HEPA filter, centrifugal motor/blower, differential pressure gauge, stainless steel double-walled doors with glass view panels, and maintains ISO Class 5 air cleanliness and low noise levels. The Dynamic Pass Box can be customized to different sizes as required.

Uploaded by

Sahil Jadhav
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DYNAMIC PASS BOX

With added features to static pass box, STARK Dynamic Pass Box consists of blower/motor assemble and filter assembly. It
aids controlling ingress of particulate contaminants into clean room & between different classified areas.

General Specification:
 Minipleat HEPA Filter with hot melt technology, which conforms to EU-13/EU-14 Grade at supply position
 Motor Blower provided are statically and dynamically balanced, Sufficient capacity and static pressure is maintained to take
care of airflow requirement for entire life to HEPA
 Ebm-nadi Centrifugal Motor/Blower are used to minimize the vibrations and noise.
 DWYER make Magnehelic Differential Pressure Gauge across HEPA
 SS 304 Double walled doors with glass view panels
 SS Handles & Hinges
 Return Air grills on side walls
 Electromagnetic interlocking to ensure only one side door will be opened at a time
 DOP Test Port at upstream of HEPA Filter
 0.45 ± 0.05mps Air Velocities
 ISO Class 5 (ISO) 14644-1:1999€ Air Cleanliness
 Less than 67db on Scale A when ambient is not greater than 55 db on scale A
 230 V AC Single Phase 50 Hz Power Supply
 UV Tube with Hour Meter
 Grey Epoxy based silicon to fill gaps if any

Optional Features:
 Mechanical Interlocking
 Support Stand to mount the pass box on wall
 Flange for sealing the gap between the pass box and the cleanroom wall
 DWYER make Magnehelic Differential Pressure Gauge across HEPA
 Flame Proof Fitting

STARK Dynamic Pass Box can be custom engineered to any size as per user’s requirement.

You might also like