FIRST PERIODICAL EXAMINATION

TLE 7

Name: ____________________________________________________________________ Score: __________

I. Read the questions carefully. Encircle the letter of the correct answer.
1. A programmable device that can perform many days to day functions like simple to complex calculations, writing letters, drawing,
creating greeting cards, play songs, videos, and much more.
A. Hardware B. Software C. Computer D. Peopleware

2. A computer hardware that optically reads an image and converts it into a digital signal.
A. Optical Drive B. Monitor C. Modem D. Scanner

3. What is the function of VGA?

A. Used to connect monitors. It has 15 pins and is called female port
B. Used to connect printers. It has 15 pins and is called female port
C. Used to connect scanning devices. It has 15 pins and is called female port
D. None of these

4. Which internal parts of the computer do the Motherboard hold?

A. Central Processing Unit (CPU) C. Expansion Card
B. Random Access Memory (RAM) D. All of the above

5. What do you call the combination of hardware and software of a computer?

A. Hardware B. Computer System C. Publisher D. Software

6. What is a collection of computer programs that enables the computer to do specific tasks?
A. hardware B. application C. software D. computer system

7. All are input devices except one, what is it?

A. mouse B. CPU C. monitor D. microphone

8. What type of software controls and manages the computer resources and the execution of application software?
A. application software B. operating system C. utilities D. system software

9. What happens to Random Access Memory (RAM) when the computer is turned off?
A. The information from RAM is stored on the hard drive. C. Both A and B
B. The information disappears D. Neither A nor B

10. What does a computer perform?

A. input, process, output, and storage operations C. mouse, keyboard, monitor, and CPU
B. applications, hardware, storage, and input D. input, output, storage, applications

11. Which tool is used for hardware to stand on to prevent static electricity from building up?
A. Anti-Static Mat B. Hex Driver C. Philips Head Screwdriver D. Wire Cutter

12. Which tool is sometimes called a nut driver? It is used to tighten nuts in the same way that a screwdriver tightens screws?
A. Anti-Static Mat B. Hex Driver C. Philips Head Screwdriver D. Wire Cutter

13. Turn the screwdriver _________ to tighten the screw.

A. Clockwise B. Counterclockwise C. Upward D. Downward

14. On electrical components, an excessive buildup of dust will act like an _________ and trap the heat.
A. Insulator B. Conductor C. Part D. Peripheral
15. When compressed air is used to clean inside the computer, the air should be blown around the components with a minimum
distance of ______ inches from the nozzle.
A. 2 B. 3 C. 4 D. 5

16. Which of the following tools can be used to clean computer components?
A. multimeter B. part retriever C. lint-free cloth D. anti-static mat

17. Which of the following tools is used for tightening and loosening slotted screws?
A. anti-static mat B. flat head screwdriver C. hex driver D. wire cutter

18. When cleaning a computer system unit, which of the following tools is best used to blow away the dust in electronic components?
A. Compressed Air B. Lint Free Cloth C. Hex Driver D. Wire Cutter

19. Which tool is used to loosen or tighten screws that have a star-like depression on the top, a feature that is mainly found on
laptops?
A. Torx Screwdriver B. Philips Head Screwdriver C. Wire Cutter D. Anti-Static Mat

20. There are different tools needed in repairing a computer, which of the following categories does parts retriever, screwdriver, wire
cutter, and long nose plier belongs?
A. Cleaning tools C. Electro-Static Discharge (ESD) tools
B. Diagnostic tools D. Hand tools

21. Tools are necessary for disassembling computer system units, which tool is the technician’s best friend.
A. Screwdriver B. Anti-static wrist strap C. Long nose plier D. Foil

22. What is the first component of the system unit to be installed?

A. Motherboard B. Power Supply Unit C. Internal Drives D. Adapter Cards

23. What connection on the motherboard is used today mostly in the windows environment?
A. SATA B. IDE C. SALA D. SCSI

24. Which of the following is the last cable to be attached?

A. Power B. parallel C. monitor D. keyboard

25. Which is the VGA port?

A. B. C. D.

26. Identify the power connector based on the image shown.

A. Molex B. ATX Auxiliary C. ATX Motherboard D. SATA

27. Monica send this photo to Rachelle via messenger. Which step in PC assembly was it?

A. Preparing the workplace

B. Placing the motherboard into the case
C. Preparing the motherboard
D. Preparing the antistatic mat

28. Sir Kenneth wanted to post this photo on his Instagram account. Which of the following is the perfect caption for his post?

A. Installing the RAM

B. Connecting the Power Supply
C. Connect/Plug-in the Peripherals
D. Installing the sound cards

29. Edward wanted to know to assemble his computer, which step should he do first?
A. Place the motherboard into the case C. Prepare the workplace
B. Prepare the motherboard D. Prepare the components

30. Before starting computer disassembly, make sure to prepare the following tools EXCEPT:
A. Set of screwdrivers C. Computer Unit
B. Anti-static device D. Container for the screw
31. What set of systematic plans and actions prevents any work-related accidents and illnesses?
A. Operational Safety and Health Procedures C. Occupational Safety and Health Procedures
B. Structural Safety and Health Procedures D. Organizational Safety and Health Procedures

32. What do you call a potential source of any harm or adverse effect to anyone?
A. danger B. hazard C. risk D. threat

33. What step in managing OSH will help minimize the hazards in a workplace?
A. Hazard Control B. Hazard Identification C. Risk Assessment D. Risk Control

34-35. Identify what following hazards were encountered by the computer technician and users
34. Worn electrical cords and plugs, and exposed wiring
A. Chemical Hazard B. Mechanical Hazard C. Electrical Hazard D. Physical Hazard

35. Cables running across the floor

A. Electric Hazard B. Mechanical Hazard C. Chemical Hazard D. Physical Hazard

36-40. Arrange the following steps in developing a flowchart. (1-5)

____________36. Seiton

____________37. Shitsuke

____________38. Seiri

____________39. Seiketsu

____________40. Seiso