SCIENTIFIC DESIGN COMPANY, INC.

A SABIC – Clariant Partnership Company

PROCESS VOLUME

EG PLANT

FOR

JUPC EG-III

AL-JUBAIL, KINGDOM OF SAUDI ARABIA

SD PROJECT NO. 53133

SABIC PROJECT NO. MP-152200003

REV. NO. 3 – SEPTEMBER 2016

49 Industrial Avenue • Little Ferry, New Jersey 07643-1901, USA

Telephone: (201) 641-0500 • Web: www.scidesign.com • Fax: (201) 641-6986
 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133

TABLE OF CONTENTS

2.1 PROCESS DESCRIPTION

2.1.1 BASIC CHEMISTRY

2.1.2 DESCRIPTION OF FLOW

2.2 PROCESS FLOWSHEETS

2.3 UTILITY FLOW DIAGRAMS

2.4 MATERIAL OF CONSTRUCTION DIAGRAM

2.5 UTILITY SUMMARY

2.6 CONSUMPTION OF RAW MATERIALS, CATALYST AND

AUXILIARY CHEMICALS

2.7 PLANT WASTE

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page 2.1 - 1

2.1

PROCESS DESCRIPTION

This volume describes the ethylene glycols plant being designed by Scientific Design Company, Inc.
(SD) for the JUPC EG-III in Al-Jubail, Kingdom of Saudi Arabia. This plant produces ethylene glycols.

The plant consists of two reaction trains with a water-cooled ethylene oxide (EO) reactor system plus
recovery facilities, glycol reaction, evaporation and purification facilities. The design yearly reactor
production, based on 8,000 operating hours per year, is 548,500 metric tons of ethylene oxide.

The design yearly reactor production, based on 8,000 operating hours per year, is as follows:

CASE 1 CASE 2
Metric tons/year Metric tons/year

Monoethylene Glycol, Fibergrade 700,000 700,000

Diethylene Glycol, Refined 57,830 97,140

Triethylene Glycol, Refined 3,040 5,700

Purified Ethylene Oxide 0 0

EO Reactor Production 548,500 584,550

Included in this volume are: a discussion of the basic chemistry; description of the process flow schemes;
process flowsheets with material balances; steam grid diagrams; cooling water flow diagrams; material of
construction diagrams; summaries of raw materials, chemicals and utilities requirements; and plant waste
stream summary.

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133

2.1.1

BASIC CHEMISTRY

INDEX

Page

A. ETHYLENE OXIDE UNIT 2.1.1 - 1

B. ETHYLENE GLYCOL UNIT 2.1.1 - 3

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page No. 2.1.1 - 1

2.1.1

BASIC CHEMISTRY

A. ETHYLENE OXIDE UNIT

In the SD process, ethylene is oxidized by oxygen in the presence of a silver catalyst to make
ethylene oxide. The oxygen may be provided by air or pure oxygen. In this plant pure oxygen is
used. The reaction is represented by the following equation:

C2H4 + ½ O2

ΔH @ 25 ºC = - 106,901 kJ/kg-mol of C2H4

In addition, carbon dioxide and water are formed as by-products. It has been established that
carbon dioxide is formed by two different routes. In the first, ethylene reacts directly with oxygen
to form carbon dioxide and water with the formation of many intermediate partial oxidation
compounds of extremely short life. The rate controlling reaction is the reaction of ethylene itself
with molecular oxygen. The overall equation is as follows:

C2H4 + 3 O2 2 CO2 + 2 H2O

ΔH @ 25 ºC = - 1,323,065 kJ/kg-mol of C2H4

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page No. 2.1.1 - 2

A. ETHYLENE OXIDE UNIT (Continued)

Carbon dioxide is also formed by the oxidation of ethylene oxide. In this case, ethylene oxide
first isomerizes to acetaldehyde. The acetaldehyde is then very rapidly oxidized to carbon
dioxide and water. The rate controlling reaction is the isomerization of ethylene oxide. The
equations, which express these reactions, are as follows:

H H H H

H - C - C- H H - C -C=O

O H

H H

H - C - C = O + 5/2 O 2 2 CO2 + 2 H 2O

Because the acetaldehyde formed is very rapidly oxidized, it is present in the plant streams only
in very small amounts. In addition to acetaldehyde, a smaller amount of formaldehyde is also
formed in the Reactor, but the exact chemistry is unknown. The aldehydes are separated from
the ethylene oxide and the ethylene glycol in the purification sections. No other by-product is
formed in any appreciable amount.
Small amounts of some organic acids are formed in the cycle water. It is not known whether
these are formed in the reactor or in the cycle water system itself. They could be oxidation
products of ethylene glycol, which accumulates in the cycle water as a result of the hydrolysis of
ethylene oxide. In any case, the quantity of such by-products formed is very small and does not
affect the plant yield appreciably.
In order to explain reactor performance, selectivity and conversion must be defined. Selectivity
is defined as mols of ethylene oxide formed/mol of ethylene reacted. Conversion is defined as
ethylene reacted/ethylene fed per pass. In general, selectivity decreases with increasing
conversion.
Selectivity is controlled by the variation of the reaction temperature and by the addition to the
reaction mixture of a moderator - ethyl chloride (EC). An increase in temperature raises
conversion but lowers selectivity. The addition of EC increases the catalyst activity and can be
adjusted to achieve maximum selectivity at a given temperature. The moderator is added in very
small quantities to achieve optimum results.

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page No. 2.1.1 - 3

B. ETHYLENE GLYCOL UNIT

The SD process involves the direct (non-catalytic) reaction of ethylene oxide and water to
form ethylene glycol. Other reactions take place since ethylene oxide also reacts with
ethylene glycol and higher homologues. This brings about the formation of diethylene
glycol, triethylene glycol, etc. with no theoretical upper limit to the size of the molecular
chain that can be made. However, because the reactions are consecutive, the lower
homologues form in greater amounts and extremely high homologues rarely are formed.
The equations for the reactions are as follows:

H H H H

H - C - C - H + H2O H -C - C- H

O O O

H H
Monoethylene Glycol

H H H H H H H H

H-C- C -H + H - C - C- H H - C - C - O- C - C-H

O O O O H H O

H H H H
Diethylene Glycol

H H H H H H H H

H -C - C - H + H - C - C - O - R H - C - C - O - C- C - O - R

O O H O H H H

H H
Higher Homologue Next Higher Homologue

All of the above reactions occur simultaneously and the relative amount of each glycol produced
depends primarily upon the initial ratio of water to ethylene oxide in the reactor and, to a lesser
extent, upon the amount of glycols present in the feeds.

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133

2.1.2

DESCRIPTION OF FLOW

INDEX
Page

A. PROCESS SCHEME SUMMARY 2.1.2 - 1

B. EO REACTION, EO AND CO2 SCRUBBING SECTION 2.1.2 - 3

C. CO2 REMOVAL SYSTEM SECTION 2.1.2 - 7

D. EO STRIPPING AND EO REABSORPTION SECTION 2.1.2 - 9

E. GLYCOL REACTION AND GLYCOL 2.1.2 - 12

EVAPORATION SECTION

F. GLYCOL DRYING AND GLYCOL 2.1.2 - 16

PURIFICATION SECTION

G. DEG AND TEG PURIFICATION SECTION 2.1.2 - 19

H. MISCELLANEOUS UTILITIES, STEAM AND 2.1.2 – 21

CONDENSATE SYSTEMS SECTION

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
SABIC – Süd-Chemie Partnership Company

SD Project No. 53133

Page No. 2.1.2 - 1
2.1.2

DESCRIPTION OF FLOW

A. PROCESS SCHEME SUMMARY

Flowsheet No. Flowsheet Title Process Steps

61-SD-1011 EO Reaction System a. Catalytic reaction of ethylene with

oxygen in a boiling water reactor.
61-SD-1012 EO and CO2 Scrubbing b. Recovery of ethylene oxide by water
scrubbing.
c. Absorption of carbon dioxide with hot
potassium carbonate solution.
62-SD-1021 CO2 Removal System a. Regeneration of carbon dioxide from
rich carbonate solution by steam
stripping.

63-SD-1031 EO Stripping a. Ethylene oxide recovery from rich

cycle water by steam stripping.
63-SD-1032 EO Reabsorption b. Reabsorption of ethylene oxide with
cooled process water.

65-SD-1051 Recycle Water System and a. Removal of ionic impurities from the
Cycle Water Treating Unit cycle water bleed
b. Removal of CO2 from the ethylene
65-SD-1052 Glycol Reaction oxide water solution by steam
stripping
65-SD-1053 1st – 3rd Effect Evaporators c. Non-catalytic reaction of ethylene
oxide with water to form glycols
65-SD-1054 4th and 5th Effect Evaporators d. Concentration of glycols by
evaporation
65-SD-1055 6th and 7th Effect Evaporators e. Removal of acetaldehyde by steam
stripping
65-SD-1056 Eighth Effect Evaporator

66-SD-1061 Glycol Drying a. Drying of crude glycols by vacuum

distillation
66-SD-1062 Glycol Purification b. Recovery of monoethylene glycol
product by vacuum distillation
66-SD-1063 MEG Product Rundown

66-SD-1064 MEG Column Ejector

66-SD-1065 MEG Splitter

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page 2.1.2 - 2

A. PROCESS SCHEME SUMMARY (CONTINUED)

67-SD-1071 DEG Purification a. Recovery of diethylene glycol and

triethylene glycol products by
67-SD-1072 TEG Purification vacuum distillation

69-SD-1091 Condensate System

69-SD-1092 HP Nitrogen System and

Miscellaneous Utilities

69-SD-1093 Process Water System and

Waste Water System

69-SD-1094 Carbonate Sump & Glycol

Sump Collection Systems

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page 2.1.2 - 3
Rev 3 – 09/07/2016
B. EO REACTION, EO AND CO2 SCRUBBING SECTION

Flowsheets 61-SD-1011/61-SD-1012

Summary

Ethylene, oxygen, and methane ballast gas enter from battery limits and are mixed with lean
cycle gas before entering a preheating unit (the Gas-Gas Exchanger). The gas mixture flows
from the Gas-Gas Exchangers to the two Reactor/Gas Coolers where about 9.6% of the
ethylene is converted per pass. The ethylene to ethylene oxide selectivity is 90.2% at start-
of-run (SOR). The reactors produce approximately 584,550 metric tons per year of ethylene
oxide, based on 8,000 operating hours per year.

The ethylene oxide is scrubbed from the Reactor/Gas Coolers exit gas using lean cycle water
and the rich cycle water is sent to the EO Stripping Section. The (scrubbed) cycle gas is sent
through the CO2 Contactor Section of the Wash Tower to remove carbon dioxide made in
the Reactor/Gas Coolers. The CO2-lean gas is then recompressed back to the Reactor/Gas
Coolers. Boiling water on the shellside of the multi-tubular reactors removes the heat of
reaction. Water circulation through the shellside of the reactors is by thermosyphon action.
The steam-water mixture from the reactors shellside is sent to steam drums where make-up
boiler feed water is preheated and steam is separated from water and sent to the 21.4 Barg
steam header.

Details

Oxygen from outside battery limits (OSBL) at 27 Barg passes through the Oxygen Filters, F-
6110A/B. It is then blended thoroughly with the Reactor/Gas Coolers, R-6110/R-6120, feed
gases in a special injection device, the Oxygen Mixing Station Sparger, MX-6110, which
consists of sparger pipes placed perpendicularly to the flow path with the holes facing
downstream. This device is used for oxygen feed injection to provide rapid mixing with
essentially zero pressure drop in the cycle gas.

Ethylene from OSBL at 40 Barg passes through the Sulfur Guard Bed, R-6150, where
essentially all the sulfur entering with the ethylene feed is removed. It then passes through
the Ethylene Filter, F-6150, before entering the cycle gas line through a mixing device. The
concentration of ethylene entering the Reactor/Gas Cooler is approximately 30 vol% and the
oxygen concentration is maintained closely at 7.6 vol%. The carbon dioxide concentration at
the reactor inlet is normally held at 1 vol% by controlling the amount of CO2 removed in the
CO2 Contactor Section of the Wash Tower, C-6115. Argon and other impurities (such as
nitrogen and ethane), which are contained in the feed streams, are allowed to build up to a
concentration of approximately 12.8 vol% in the cycle gas. Ballast methane from OSBL, at
21 Barg, is added to make up the balance of the gas (approximately 48.1 vol% at the reactor
inlet).

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page 2.1.2 - 4
Rev 3 – 09/07/2016
Details (Continued)

In order to control the oxidation at the optimum point, and to suppress undesirable side
reactions, a small stream of EC moderator is introduced into the reactor feed gas via the
Moderator Feed Drum, V-6140. The moderator is introduced as a liquid stream.

The reactor feed gas is preheated in the tubeside of the Gas-Gas Exchangers, E-6111/E-
6121, by heat exchange with the reactor effluent gas. The feed gas then flows downward
through the Reactor/Gas Cooler where contained ethylene is partially converted to ethylene
oxide and by-products, CO2 and water. The feed gas is heated to reaction temperature in the
top section of the Reactor/Gas Cooler which is filled with inerts. The heated gas then enters
the catalyzed section of the Reactor/Gas Cooler where approximately 9.6% of the ethylene is
reacted per pass. The reactor selectivity of ethylene to ethylene oxide is 90.2% at start-of-run
(SOR). The Reactor Section of the Reactor/Gas Cooler operates at an average pressure of
20.7 Barg and at cycle gas temperatures which are slightly higher than the boiling water
temperature. The shellside temperature of boiling water will vary from approximately
235°C for new active catalyst to approximately 275°C for old, less active catalyst.

The heat of reaction is removed by boiling water in the shell of the Reactor Section. Water
circulation is by thermosyphon action with 2 to 4 wt% vaporization. The two-phase mixture
leaving the shell of the Reactor Section flows to the Reactor Steam Drums, V-6110/V-6120,
where the steam and water are separated. The water is then returned to the Reactor Section
shellside circulation loop. A portion of the steam is used to preheat the make-up boiler feed
water to the saturation temperature in a direct contact heat exchange section packed with 50
mm carbon steel Pall rings. The remaining steam passes through a de-entrainment device
where any entrained water is removed. The dry steam is then sent to the 21.4 Barg steam
header and is utilized in other sections of the plant. The reaction temperature is regulated by
controlling the pressure in the steam drums.

The hot effluent from the Reactor Section of the Reactor/Gas Cooler is cooled from 239°C to
215°C at start-of-run (SOR) condition in the Gas Cooler Section by generating 15.6 Barg
steam at SOR. The steam-water mixture leaving the shellside of the Gas Cooler Section
flows to the Reactor Gas Cooler Steam Drums, V-6112/V-6122, where the steam is
separated from water and sent to the 13.3 Barg steam header. The maximum operating outlet
gas temperature is kept below 227°C to limit the temperature of the reactor feed gas leaving
the Gas-Gas Exchanger to 200°C at end-of-run (EOR) condition. The integration of the Gas
Cooler and Reactor into a single unit reduces the residence time of the hot effluent thereby
minimizing the formation of undesirable by-products. The reactor effluent leaving the Gas
Cooler Section flows through the shellside of the Gas-Gas Exchanger where it is cooled to
about 86°C at SOR condition. The cooled gases from the two Gas-Gas Exchangers are
combined and then further cooled to 70°C in the Wash Tower Feed/Bottoms Exchanger, E-
6115, before entering the Scrubber Section of the Wash Tower, C-6115, where it is con-
tacted countercurrently with lean cycle water to absorb the ethylene oxide. Small quantities
of other gases which also dissolve in the scrubbing water are recovered in the overhead of
the Reabsorber, C-6320 (EO Reabsorption Section) and compressed back to the CO2
Contactor Section of the Wash Tower.

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page 2.1.2 - 5
Rev 3 – 09/07/2016

Details (Continued)

By-product water made in the Reactor is condensed in the Scrubber Section of the Wash
Tower. The Scrubber Section liquid (rich cycle water) is heated first in the Wash Tower
Feed/Bottoms Exchanger and then in the Cycle Water Exchanger, E-6312 (Dwg. 63-SD-
1031) before flowing to the Stripping Column, C-6310 (Dwg. 63-SD-1031) for recovery of
the ethylene oxide.

EO-lean gas from the Scrubber Section of the Wash Tower, containing approximately 1.48
vol% CO2, is combined with the gas from the Reclaim Compressor, K-6320 (Dwg. 63-SD-
1032). The combined gas, containing approximately 1.55 vol% CO2, is fed to the
Presaturator Section of the Wash Tower. In the Presaturator Section, the gas temperature is
raised by direct heat exchange with hot wash water flowing down from the Wash Section
located at the top of the Wash Tower. The heated gas is then sent to the CO2 Contactor
Section of the Wash Tower, where it is contacted with an activated lean potassium
carbonate/potassium borate/potassium vanadate solution from the Regenerator/Regenerator
Feed Flash Drums, C-6220 (Dwg. 62-SD-1021). In the CO2 Contactor Section, the CO2 in
the gas reacts with potassium carbonate to form potassium bicarbonate thereby reducing the
CO2 content of the gas to approximately 1 vol% CO2. The CO2-lean gas from the CO2
Contactor Section is cooled in the Wash Section (top of the Wash Tower) by direct heat
exchange with cooled water from the Wash Water Coolers, E-6116 (R-3). This reduces the
water content in the Reactor/Gas Cooler feed to a level that does not inhibit catalyst activity.
This process of scrubbing with water also ensures the complete removal of entrained
carbonate, borate and vanadate before the gas is returned to the Reaction Section. The net
water from the wash water loop is purged by taking a bleed from the discharge of the Wash
Water Pumps, P-6116A/B, and sending it to the flash drum of the Regenerator/Regenerator
Feed Flash Drums, C-6220 (Dwg. 62-SD-1021). The remaining wash water is cooled to
43°C in the Wash Water Coolers before it is recirculated to the top of the Wash Tower.

The CO2-lean gas from the top of the Wash Tower is sent through the KO Drum Section
located at the bottom of the Wash Tower. The gas leaving the KO Drum Section flows to
the Recycle Compressor, K-6115, where it is compressed to approximately 21.05 Barg to
restore the pressure lost in the reaction cycle gas loop.

To control the build-up of nitrogen and argon (which enter as impurities in the oxygen feed)
to 12 vol% in the EO Reactor/Gas Cooler feed, a small cycle gas purge stream is taken from
the EO-lean gas leaving the KO Drum Section of the Wash Tower. The cycle gas purge is
then sent to OSBL for incineration.

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page 2.1.2 - 6
Rev 3 – 09/07/2016

Details (Continued)

A portion of the lean carbonate solution from the Regenerator/Regenerator Feed Flash
Drums, C-6220 (Dwg. 62-SD-1021) is passed through the Carbonate Solution Filter, F-6117,
to remove particulate matter larger than 10 microns. It is then mixed with the remaining
solution before it is cooled to 80°C in the Carbonate Feed/Effluent Exchanger, E-6117 (R-
3), by heat exchange with the rich carbonate solution from the CO2 Contactor Section of the
Wash Tower. Afterwards the cooled lean carbonate solution enters the CO2 Contactor
Section of the Wash Tower.

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page 2.1.2 - 7
Rev 3 – 09/07/2016

C. CO2 REMOVAL SYSTEM SECTION

Flowsheet 62-SD-1021

Summary

The rich carbonate solution from the Carbonate Feed/Effluent Exchanger (EO and CO2
Scrubbing Section) is regenerated at essentially atmospheric pressure using stripping steam.
The regenerated lean carbonate solution is returned to the CO2 Contactor Section of the
Wash Tower (EO and CO2 Scrubbing Section) for CO2 absorption.

Details

The rich carbonate solution from the Carbonate Feed/Effluent Exchanger, E-6117 (R-3)
(Dwg. 61-SD-1012) is mixed with the wash water purge stream from the Wash Water
Pumps, P-6116A/B (Dwg. 61-SD-1012) before entering the first stage flash drum of the
Regenerator/Regenerator Feed Flash Drums, C-6220, by pressure letdown. In the first stage
flash drum operating at about 0.95 Barg, most of the hydrocarbons dissolved in the rich
carbonate solution are liberated into the vapor phase. The first stage flash drum liquid flows
by pressure let-down to the second stage flash drum operating at about 0.77 Barg. In the
second stage flash drum, which is equipped with a special internal, essentially all of the
dissolved hydrocarbons remaining in the first stage flash drum liquid are flashed overhead.
The overhead vapors from the two flash drums are combined and sent to the Reclaim
Compressor Aftercooler, E-6323 (Dwg. 63-SD-1032). The carbonate solution preheating
and the two-steps flashing of the rich carbonate solution ensures that the hydrocarbon
content in the vapor stream from the Regenerator Condenser KO Drum, V-6221 is in the
ppm level. A portion of the CO2 Vent is sent to OSBL for CO2 recovery and the remainder
is vented to the atmosphere.

The carbonate solution from the second stage flash drum flows by pressure let-down to the
Regenerator operating at near atmospheric pressure. The top of the Regenerator has special
internals designed to accommodate the flashing feed and to minimize carbonate solution
entrainment into the vapor.

In the Regenerator, the CO2 is stripped out from the rich carbonate solution using steam with
the heat supplied both directly (by live steam injection) and indirectly (by the Regenerator
Reboiler, E-6220, and Regenerator Extraction Reboiler, E-6223). The Regenerator Reboiler
is heated by utility steam while the Regenerator Extraction Reboiler is heated by extraction
steam from the Sixth Effect Evaporator, C-6536 (Dwg. 65-SD-1055). The steam provides
heat to strip out the CO2 and to make up sensible heat lost to the cycle gas in the CO2
Contactor Section of the Wash Tower, C-6115 (Dwg. 61-SD-1012). The amount of steam
added directly and indirectly is adjusted to maintain the solution strength at approximately
20 wt% equivalent of potassium carbonate, i.e. to maintain the water balance around the
unit.

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page 2.1.2 - 8
Rev 3 – 09/07/2016
Details (Continued)

The Regenerator overhead, containing mainly CO2, water and monoethylene glycol (MEG),
is sent to the Regenerator Precondenser, E-6222, where the bulk of the MEG is condensed,
collected in the Regenerator Precondenser KO Drum, V-6222, and sent to the flash drum
section of the Stripping Column/Flash Drum, C-6310 (Dwg. 63-SD-1031) via the
Regenerator Precondensate Condensate Pumps, P-6222A/B.

The vapor from the KO drum flows to the Regenerator Condenser, E-6221A-C, where the
bulk of the water vapor is condensed. The vapor-liquid mixture from the condenser flows to
the Regenerator Condenser KO Drum, V-6221, where the vapor and liquid are separated and
the CO2-rich vapor stream is either sent to OSBL for CO2 recovery or vented to the
atmosphere. The condensate is pumped by the Regenerator Condensate Pumps, P-6221A/B,
with a portion being used as seal flush water for the Carbonate Solution Pumps, P-6220A/B,
and as makeup water, if required, for the Wash Tower, C-6115 (Dwg. 61-SD-1012) wash
water circulation loop. The remainder of the condensate is sent to the bottom of the
Regenerator/Regenerator Feed Flash Drums.

The regenerated lean carbonate solution leaving the bottom of the Regenerator/Regenerator
Feed Flash Drums is recirculated to the CO2 Contactor Section of the Wash Tower, C-6115
(Dwg. 61-SD-1012) via the Carbonate Solution Pumps, P-6220A/B.

In the rich solution, approximately 61% of the carbonate is converted to bicarbonate, i.e., the
fractional conversion is 0.61. In contrast, the lean solution fractional conversion is about
0.50.

Foaming is minimized by adding a small amount of an antifoam agent via a dosing bottle
into the bottom of the Regenerator/Regenerator Feed Flash Drums.

Make-up carbonate solution is prepared by the mixture of several batches. Potassium

carbonate is dissolved first in water in the Carbonate Sump, SU-6972 (Dwg. 69-SD-1094.)
Then boric acid (H3BO3) and vanadium pentoxide (V2O5) are added to make the activated
carbonate solution. The fresh activated carbonate solution is pumped to the Carbonate
Storage Tank, TK-6230, via the Carbonate Transfer Pump, P-6230. The carbonate solution
is then pumped into the bottom of the Regenerator/Regenerator Feed Flash Drums via the
Carbonate Transfer Pump. The carbonate system (except for steam condensate facilities) is
constructed entirely of stainless steel. Corrosion inhibitors are therefore, not required.

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page 2.1.2 - 9
Rev 3 – 09/07/2016
D. EO STRIPPING AND EO REABSORPTION SECTION

Flowsheets 63-SD-1031/63-SD-1032/63-SD-1033

Summary

Rich cycle water containing ethylene oxide in solution is preheated before entering the
Stripping Column/Flash Drum where ethylene oxide is stripped out. The lean cycle water is
then pumped through a series of heat exchangers where the water is cooled prior to being
returned to the Scrubber Section of the Wash Tower (EO and CO2 Scrubbing Section). A
bleed stream is taken and sent to the glycol unit to purge the glycol made in the cycle water
loop.

The ethylene oxide in the overhead vapor from the Stripping Column/Flash Drum is
reabsorbed by contact with cooled process water in the Reabsorber. The overhead from the
Reabsorber is compressed back into the cycle gas system by the Reclaim Compressor while
the bottoms are sent to the Glycol Feed Stripper (Glycol Reaction Section).

Details

The rich cycle water from the Wash Tower Feed/Bottoms Exchanger, E-6115 (Dwg. 61-SD-
1012), is fed to the Cycle Water Exchanger, E-6312 (R-3), which is a feed-bottoms
exchanger for the Stripping Column/Flash Drum, C-6310. The Stripping Column/Flash
Drum is packed with structured packing. The rich cycle water at 93°C is flashed into the top
of the Stripping Column/Flash Drum, which operates at a top pressure of approximately 0.59
Barg. In the Stripping Column/Flash Drum, ethylene oxide in the cycle water is stripped
overhead. The heat necessary for stripping is supplied directly by steam from the MEG
Column Condenser, E-6621 (Dwg. 66-SD-1062) and extraction steam from the Seventh
Effect Evaporator, C-6537 (Dwg. 65-SD-1055) and indirectly by the Stripping Column
Reboiler, E-6310. The bottoms are stripped to an ethylene oxide concentration of 12 ppm wt
(5 ppm mol). In addition, the dissolved carbon dioxide, ethylene, ethane, oxygen, nitrogen,
argon and methane are also stripped out.

The lean (stripped) water from the bottom of the Stripping Column/Flash Drum at 115°C is
flashed into the Flash Drum section of the Stripping Column. The flashed vapor is sent to the
Cycle Water Flash Drum Compressor KO Drum, V-6315. Both drum pressures are
maintained by the Cycle Water Flash Drum Compressor, K-6315, where the flashed vapor is
recompressed and sent back to the Stripping. The flash cooling of the Stripping Column
bottoms reduces the heat requirement of the Stripping Column/Flash Drum and the cooling
requirement of the Cycle Water Cooler, E-6313A-F.

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page 2.1.2 - 10
Rev 3 – 09/07/2016

Details (Continued)

Condensate from the Regenerator Precondenser Condensate Pumps, P-6222A/B (Dwg. 62-
SD-1021), is sent to the Flash Drum section, for the recovery of contained glycol. If
required, water from the Recycle Water Tank, TK-6540 (Dwg. 65-SD-1051), is added to the
Flash Drum. Water from the drum is pumped by the Stripping Column Bottoms Pumps, P-
6310A/B, through the Cycle Water Exchanger where it is cooled to about 64°C. The lean
water then flows to the Cycle Water Cooler, E-6313A-F, where it is cooled to 43°C.
Afterwards it is sent to the Cycle Water Chiller Exchanger, E-6314, to be cooled further to
33°C against chilled water supplied from the Cycle Water Chiller located OSBL.
Afterwards, the cycle water is returned to the top of the Scrubber Section of the Wash
Tower, C-6115 (Dwg. 61-SD-1012), via the Cycle Water Pumps, P-6312A/B. A small
portion of the cycle water Flash Drum liquid is sent to the MEG Column Condenser, E-6621
(Dwg. 66-SD-1062), which acts as a waste heat reboiler for the Stripping Column.

The glycol concentration in the cycle water builds up (to about 2.3 wt%) due to a small
amount of glycol formation in the cycle water loop and from the glycols in the stripping
steam injected into the bottom of the Stripping Column. The glycols are removed from the
cycle water loop by taking a bleed from the discharge of the Stripping Column Bottoms
Pumps, P-6310A/B, to the Cycle Water Treating Unit, PK-6550 (Dwg. 65-SD-1051), where
it is deionized and used as reflux for the evaporators.

A small amount of antifoam is continuously added to the cycle water system via the Cycle
Water Antifoam Injection System, PK-6336, to prevent excessive foaming. Caustic addition
to the cycle water system is provided via the Caustic Injection System, PK-6335, to
neutralize acids make.

The ethylene oxide, dissolved gases, and water vapor from the Stripping Column are
condensed in the air-cooled Stripping Column Condenser, E-6311A-H, where rest of the
remaining water and heavy compounds are condensed. The two-phase mixture leaving the
Stripping Column Condenser flows to the Acid Scrubber, V-6311, which is packed column.
In the Acid Scrubber, the vapor is contacted with process water to scrub out acids present in
the vapor. All the liquid from the Acid Scrubber is returned to the top of the Stripping
Column as reflux via the Stripping Column Reflux Pumps, P-6311A/B, and the vapor
together with the overhead vapor from the Glycol Feed Stripper, C-6510 (Dwg. 65-SD-
1052), are sent to the Reabsorber, C-6320.

Ethylene oxide contained in the feed vapors is absorbed by cooled process water in the
Reabsorber, which is a packed column. Carbon dioxide and other noncondensible gases
leaving the top of this column are sent to the Reclaim Compressor KO Drum, V-6320.

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page 2.1.2 - 11
Rev 3 – 09/07/2016
Details (Continued)

The flash gas from the Regenerator/Regenerator Feed Flash Drums, C-6220 (Dwg. 62-SD-
1021) is cooled in the Reclaim Compressor Aftercooler, E-6323, and the vapor and
condensate from the aftercooler are fed also to the Reclaim Compressor KO Drum. The
condensate is sent to the Waste Water Sump, SU-6970 (Dwg. 69-SD-1093), while the gases
leaving the Reclaim Compressor KO Drum are fed to the Reclaim Compressor, K-6320,
where the gases are compressed and then recycled back to the Presaturator Section of the
Wash Tower, C-6115 (Dwg. 61-SD-1012). To improve the absorption of ethylene oxide in
the bottom section of the Reabsorber, part of the bottoms solution (at approximately 48°C) is
cooled and recirculated through the bottom packed bed. This recirculated solution is cooled
to 43°C in the Reabsorber Bottoms Coolers, E-6322 (R-3), using bypass control to maintain
the desired temperature.

The process water fed to the top of the Reabsorber is recycled water from the Recycle Water
Tank, TK-6540 (Dwg. 65-SD-1051). The water is cooled to 43°C in the Reabsorber Water
Cooler, E-6321 (R-3). The flow of water is adjusted to maintain a Reabsorber bottoms
concentration of approximately 12.9 wt% ethylene oxide. The net bottoms from the
Reabsorber are pumped to the Reabsorber Bottoms Heater, E-6324, where it is heated
against recycle water from the Reactor Feed Preheater, E-6520, (Dwg. 65-SD-1052). The net
bottoms are then sent to the Glycol Feed Stripper, C-6510 (Dwg. 65-SD-1052).

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page 2.1.2 - 12
Rev 3 – 09/07/2016

E. GLYCOL REACTION AND GLYCOL EVAPORATION SECTION

Flowsheets 65-SD-1051/65-SD-1052/65-SD-1053/65-SD-1054/65-SD-1055

Summary

Ethylene oxide solution from the Reabsorber is sent to the Glycol Feed Stripper for removal
of CO2. The CO2-free stream is then preheated and fed to the Glycol Reactor. The reactor
effluent is fed into the first stage of an Eight Effect Evaporator System. The cycle water
bleed from the cycle water is treated in a Cycle Water Treating Unit and then used in the
evaporator system as reflux.

The condensate from the reboilers of the evaporators is used to preheat the feed to the Glycol
Reactor, and is then sent to the Recycle Water Tank via the Reabsorber Bottoms Heater, E-
6324, (Dwg. 63-SD-1032) during the 25/1 case. During the 17/1 case, the heater is bypassed.
The overhead vapor from the Fifth Effect Evaporator is used to preheat the feed to the
Glycol Reactor and to reboil the Sixth Effect bottoms. The overhead vapor from the Sixth
Effect Evaporator is used to reboil Regenerator Bottoms and to reboil the Seventh Effect
bottoms. The overhead vapor from the Seventh Effect Evaporator is used as stripping steam
for both the Stripping Column and Glycol Feed Stripper and also is used to reboil the Eighth
Effect Evaporator bottoms and to preheat the feed to the Glycol Reactor. The overhead from
the Eighth Effect Evaporator is condensed with a portion returning to the column as reflux,
another portion is used as reflux for the Drying Column (Glycol Drying Section) and the
remainder is sent to the Recycle Water Tank. The concentrated glycol from the Eighth
Effect Evaporator is pumped to the Drying Column (Glycol Drying Section) for removal of
the remaining water.

Details

The Reabsorber, C-6320 (Dwg. 63-SD-1032), bottoms contain dissolved CO2 which would
present a corrosion problem in the glycol plant. It is therefore, stripped of its CO2 content in
the Glycol Feed Stripper, C-6510, by injecting extraction steam from the Seventh Effect
Evaporator, C-6537, into the bottom of the column. Additional steam from the Condensate
Flash Drum, V-6920 (Dwg. 69-SD-1091) and 5 Barg utility steam, if required, are also fed to
the bottom of the Glycol Feed Stripper. The overhead vapor from the Glycol Feed Stripper,
containing about 91 mol% ethylene oxide, is recycled back to the Reabsorber. The Glycol
Feed Stripper is a packed column operating at a pressure of approximately 0.46 Barg. The
bottoms from Glycol Feed Stripper are then pumped by the Reactor Feed Pumps, P-
6510A/B, to the Glycol Reactor, R-6520.

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page 2.1.2 - 13
Rev 3 – 09/07/2016

Details (Continued)

Prior to entry into the Glycol Reactor, the feed is first partially preheated to 85°C in the
Reactor Feed Preheater, E-6520, by heat exchange with the evaporators condensate which is
pumped from the Eighth Effect Reboiler Condensate Drum, V-6538, via the Evaporator
Condensate Pumps, P-6535A/B. The reactor feed temperature is then raised to 112°C in the
First Stage Reactor Feed Heater, E-6521, by condensing the extraction steam from the
Seventh Effect Evaporator, C-6537. For the 25/1 water to ethylene oxide molar ratio case,
the reactor feed temperature is raised to 127°C through the Second Stage Reactor Feed
Heater, E-6522, by condensing the extraction steam from the Fifth Effect Evaporator, C-
6535. For the 17/1 case, this heater is not used and therefore the temperature remains at
112°C. The reactor feed is preheated to 123°C for the 17/1 case (134°C for the 25/1 case) in
the Third Stage Reactor Feed Heater, E-6523, by condensing the overhead of the Aldehyde
Stripper, C-6560, and finally to the initial reaction temperature, which is 132°C for 17/1 case
and 151°C for the 25/1 case, in the Fourth Stage Reactor Feed Heater, E-6524, using 13.3
Barg steam.

The preheated ethylene oxide-water solution at 132°C is fed to the Glycol Reactor, an
adiabatic, pipeline reactor which is designed to produce the maximum amount of
monoethylene glycol (MEG) based on the water to ethylene oxide molar ratio of 17/1 in the
reactor feed. The reaction is non-catalytic and essentially complete conversion of the
ethylene oxide is attained. The reactor residence time is approximately 7 minutes.

The reactor effluent, containing about 81.7 wt% water and at approximately 195°C, flows
directly into the First Effect Evaporator. The evaporator train consists of eight effects: First
Effect Evaporator, C-6531; Second Effect Evaporator, C-6532; Third Effect Evaporator, C-
6533; Fourth Effect Evaporator, C-6534; Fifth Effect Evaporator, C-6535; Sixth Effect
Evaporator, C-6536; Seventh Effect Evaporator, C-6537; and Eighth Effect Evaporator, C-
6538, operating at successively lower pressures of 10.2, 8.4, 6.9, 5.6, 4.3, 2.7, 1.2 Barg and
140 mm Hg abs for the 17/1 case. The First and Second Effect Evaporators consists two
beds of structured packing, one above and one below the feed. The bottom bed is provided
to strip out the aldehydes that are present in the feed. Water reflux is provided on the top
bed. All the other evaporators are provided with one bed packed with structured packing
and water reflux. The heat requirement for the evaporators is supplied by their
corresponding reboilers, namely: First Effect Reboiler, E-6531; Second Effect Reboiler, E-
6532; Third Effect Reboiler, E-6533; Fourth Effect Reboiler, E-6534; Fifth Effect Reboiler,
E-6535; Sixth Effect Reboiler, E-6536; Seventh Effect Reboiler, E-6537; and Eighth Effect
Reboilers, E-6538A/B. All reboilers, except for the First Effect Reboiler, are mixed feed
type reboilers.

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page 2.1.2 - 14
Rev 3 – 09/07/2016

Details (Continued)

Deionized cycle water from the Cycle Water Treating Unit, PK-6550, is stored in the
Treated Water Tank, TK-6550, and then pumped to the first seven evaporators via the
Treated Water Pumps, P-6550A/B, to be used as reflux. The reflux to the evaporators helps
prevent glycol from passing overhead and recycling to the Glycol Reactor which would
increase the make of heavier glycols. The MEG recycle from the MEG Column Hotwell
Pumps, P-6623A/B (Dwg. 66-SD-1064) is mixed with the feed before entering the First
Effect Evaporator. The Eighth Effect Evaporator is refluxed by its own overhead vapor
condensate from the Evaporator Hotwell, SU-6538, via the Evaporator Hotwell Pumps, P-
6538A/B. Excess condensate from the Evaporator Hotwell not used as reflux is recycled to
the Recycle Water Tank, TK-6540, and if necessary to the Drying Column, C-6610 (Dwg.
66-SD-1061) as reflux.

The cycle water bleed from the Cycle Water Flash Drum Section of the Stripping Column,
C-6310 (Dwg. 63-SD-1031), combined with the blowdown bleed from the MEG Column
Condenser, E-6621, (Dwg. 66-SD-1062), is cooled in the Cycle Water Bleed Exchanger, E-
6552, by heat exchange with the treated water from the Treated Water Tank. The cycle water
bleed is further cooled by cooling water in the Cycle Water Bleed Coolers, E-6553A/B (R-
3), before being sent to the Cycle Water Treating Unit. This stream is passed through the
Cycle Water Treating Unit to remove small amounts of ionized impurities that are formed in
the ethylene oxide reactor and cycle water system. Deionization of the cycle water bleed is
necessary to prevent corrosion problems in the glycol plant and to enable the use of this
stream in fibergrade monoethylene glycol production.

Steam condensate from the First Effect Reboiler, enters the steam condensate system
through the First Effect Reboiler Condensate Drum, V-6531. Condensate from the Second
Effect Reboiler is collected in the Second Effect Reboiler Condensate Drum, V-6532, and
flashed into the Aldehyde Stripper, C-6560, mounted on top of the Third Effect Reboiler
Condensate Drum, V-6533. The condensate from the Third Effect Reboiler is also sent to
the Aldehyde Stripper. The aldehydes present in the condensates from the Second and Third
Effect Reboilers are steam stripped in the Aldehyde Stripper. The overhead from the
Aldehyde Stripper is condensed in the Third Stage Reactor Feed Heater, E-6523. The hot
condensate from the Third Stage Reactor Feed Heater is then fed to the top of the Waste
Water VOC Stripper, C-6570, where the aldehydes are stripped overhead and sent to OSBL
for incineration. The Waste Water VOC Stripper bottoms are cooled in the Aldehyde
Stripper Waste Water Cooler, E-6560, to 45°C before it is sent to the Waste Water Sump,
SU-6970 (Dwg. 69-SD-1093).

The condensate from the Third Effect Reboiler Condensate Drum, V-6533, the Fourth Effect
Reboiler Condensate Drum, V-6534, the Fifth Effect Reboiler Condensate Drum, V-6535,
the Sixth Effect Reboiler Condensate Drum, V-6536, and the Seventh Effect Reboiler
Condensate Drum, V-6537, is flashed into the Fourth Effect Reboiler Condensate Drum, the
Fifth Effect Reboiler Condensate Drum, the Sixth Effect Reboiler Condensate Drum, V-
6536, the Seventh Effect Reboiler Condensate Drum, V-6537, and the Eighth Effect
Reboiler Condensate Drum, V-6538, respectively. The flash steam from the condensate
drum is sent to its corresponding reboiler for additional heat recovery. The total condensate
from the reboilers of the Second Effect, Third Effect, Fourth Effect, Fifth Effect, Sixth

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page 2.1.2 - 15
Rev 3 – 09/07/2016
Details (Continued)

Effect, Seventh Effect, and Eighth Effect Evaporators is collected in the Eighth Effect
Reboiler Condensate Drum. Process condensate from the Regenerator Extraction Reboiler,
E-6223 (Dwg. 62-SD-1021), the condensate from the First Stage Reactor Feed Heater, E-
6521, and the condensate from the Second Stage Reactor Feed Heater, E-6522 are also
collected in the Eighth Effect Reboiler Condensate Drum. This condensate is pumped by the
Evaporator Condensate Pumps, P-6535A/B, to the Reactor Feed Preheater, E-6520, where it
is cooled to 63°C by preheating the Glycol Reactor feed. In the 25/1 water to ethylene oxide
molar ratio case only, additional cooling is provided by the Reabsorber Bottoms Heater, E-
6324, to get the temperature down to 63°C. The evaporator condensate is then further cooled
to 43°C in the Recycle Water Cooler, E-6540, before being sent to the Recycle Water Tank,
TK-6540. The water which is accumulated in the Recycle Water Tank is then pumped by
the Recycle Water Pumps, P-6540A/B, to the Reabsorber Water Cooler, E-6321 (Dwg. 63-
SD-1032).

The overhead vapor (extraction steam) from the Fifth Effect Evaporator is used to preheat
the feed to the Glycol Reactor and to reboil the Sixth Effect bottoms. The overhead vapor
(extraction steam) from the Sixth Effect Evaporator is to reboil Regenerator Bottoms and to
reboil the Seventh Effect bottoms. The overhead vapor (extraction steam) from the Seventh
Effect Evaporator is used as stripping steam for both the Stripping Column, C-6310 (Dwg.
63-SD-1031) and the Glycol Feed Stripper, C-6510 and also is used to reboil the Eighth
Effect Evaporator bottoms and to preheat the feed to the Glycol Reactor, R-6520. Water
and a small amount of glycol passing overhead from the Eighth Effect Evaporator is
condensed in the Eighth Effect Condenser, E-6539, and collected in the Evaporator Hotwell,
SU-6538. A portion of the condensate is returned to the Eighth Effect Evaporator as reflux,
another portion is used as reflux for the Drying Column, C-6610 (Dwg. 66-SD-1061) and the
remainder is sent to the Recycle Water Tank via the Evaporator Hotwell Pumps. Vacuum is
maintained in the Eighth Effect Evaporator via the Drying Column Vacuum Pump System,
EJ-6612 (Dwg. 66-SD-1061).

The crude glycol from the Eighth Effect Evaporator, containing approximately 10 wt%
water, is pumped directly to the Drying Column, C-6610, (Dwg. 66-SD-1061) via the
Concentrated Glycol Pumps, P-6530A/B, for removal of the residual water.

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page 2.1.2 - 16
Rev 3 – 09/07/2016

F. GLYCOL DRYING AND GLYCOL PURIFICATION SECTION

Flowsheets 66-SD-1061/66-SD-1062/66-SD-1063/66-SD-1064/66-SD-1065

Summary

The crude wet glycol is dried by vacuum distillation in the Drying Column. The Drying
Column bottoms are fed to the MEG Column where fibergrade monoethylene glycol product
is taken as a sidestream product near the top of the column. The product is cooled and sent to
OSBL storage.

The MEG Column bottoms are sent to the MEG Splitter where the remaining MEG is
removed from the heavier glycols and recycled back to the MEG Column Hotwell. The
MEG Splitter bottoms are sent to the DEG Column (DEG and TEG Purification Section) for
DEG and TEG separation.

Details

Crude wet glycol from the bottom of the Eighth Effect Evaporator, C-6538, (Dwg. 65-SD-
1056), containing 10 wt% water is pumped directly to the Drying Column, C-6610, which is
packed with structured packing in the rectifying section and has 17 two-pass trays in the
stripping section. The column operates at a top pressure of 140 mm Hg abs. Before entering
the Drying Column, the crude glycol is passed through the Drying Column Feed Filters, F-
6610A/B, to remove particulates larger than 150 microns. Afterwards, the crude glycol is
heated by the hot MEG product in the Crude Glycol Heater, E-6613. If necessary, the crude
glycol can be cooled in the Crude Glycol Tank Feed Cooler, E-6615, stored in the Crude
Glycol Tanks, TK-6615A/B, and then pumped to the Drying Column via the Crude Glycol
Pump, P-6615. The Drying Column overhead vapors are condensed in the Drying Column
Condenser, E-6611, and together with the condensate from the Drying Column Vacuum
Pump System, EJ-6612, are collected in the Drying Column Hotwell, SU-6610. The hotwell
condensate is then pumped by the Drying Column Reflux Pumps, P-6611A/B, with a portion
going to the Drying Column as reflux, if required, and the balance going to the Waste Water
Sump, SU-6970 (Dwg. 69-SD-1093). Boil-up heat for the Drying Column is provided by
13.3 Barg steam in the Drying Column Reboiler, E-6610. Steam condensate from the
Drying Column Reboiler enters the steam condensate system through the Drying Column
Reboiler Condensate Drum, V-6610.

The evaporator reboiler vents from the Seventh Effect Reboiler, E-6537 (Dwg. 65-SD-
1055), and the Eighth Effect Reboiler, E-6538 (Dwg. 65-SD-1056), are fed together with the
Drying Column overheads to the Drying Column Condenser.

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page 2.1.2 - 17
Rev 3 – 09/07/2016

Details (Continued)

The Drying Column bottoms are pumped by the Drying Column Bottoms Pumps, P-
6610A/B, to the MEG Column Feed Filters, F-6620A/B, to remove particulates larger than
150 microns and then to the MEG Column, C-6620, which is packed with structured
packing. The MEG Column operates at an overhead pressure of 110 mm Hg abs. It has an
external condenser, the MEG Column Condenser, E-6621, which is used to generate low
pressure steam using cycle water from the Stripping Column Bottoms Pumps, P-6310A/B
(Dwg. 63-SD-1031). The generated low pressure process steam is then used as stripping
steam in the Stripping Column, C-6310 (Dwg. 63-SD-1031). The blowdown from the
shellside of the MEG Column Condenser along with the cycle water bleeds is sent to the
Cycle Water Treating Unit, PK-6550 (Dwg. 65-SD-1051).

The condensate from the MEG Column Condenser is collected in the MEG Column Reflux
Drum, V-6621, and returned to the top of the MEG Column as reflux via the MEG Column
Reflux Pumps, P-6621A/B. Boil-up heat is provided by 21 Barg steam in the MEG Column
Reboiler Preheater, E-6624, and the MEG Column Reboiler, E-6620. The MEG Column
Reboiler Circulation Pumps, P-6624A/B, provide circulation for the MEG Column Reboiler
Preheater. MEG Column Reboiler Filters, F-6624A/B, are provided to remove particulates
larger than 150 microns from the MEG Column Reboiler Preheater feed. Steam condensate
from the MEG Column Reboiler enters the steam condensate system through the MEG
Column Reboiler Condensate Drum, V-6620. Vacuum is maintained in the MEG Column
by the MEG Column Vacuum Pump System, EJ-6622. The fibergrade monoethylene glycol
product is withdrawn as a liquid sidestream and pumped by the MEG Product Pumps, P-
6622A/B, first to the Crude Glycol Heater, E-6613, where it is cooled by the Drying Column
feed, and then to the MEG Product Cooler, E-6622, where it is finally cooled to 48°C. The
cooled MEG product is then passed through the MEG Product Resin Drum, V-6640, to
reduce the aldehyde content in the MEG product, before sending to OSBL.

The MEG Column overhead system has been designed to purge about 10% of the MEG in
the feed as vapor from the MEG Column Condenser in order to minimize the aldehyde
concentration in the product. The MEG in this purge is condensed in the MEG Column
Ejector Precondenser, E-6623, and collected in Section "A" of the MEG Column Hotwell,
SU-6620. The condensate is then pumped by the MEG Column Hotwell Pumps, P-
6623A/B, to the First Effect Evaporator, C-6531 (Dwg. 65-SD-1053) for glycol recovery or
to the Cycle Water Treating Unit, PK-6550 (Dwg. 65-SD-1051) for treatment before glycol
recovery.

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page 2.1.2 - 18
Rev 3 – 09/07/2016

Details (Continued)

The MEG Column Bottoms Pumps, P-6620A/B, pump the column bottoms to the MEG
Splitter, C-6630. The MEG Splitter operates at a top pressure of 10 mm Hg abs, and has a
top-mounted, knock-back condenser, the MEG Splitter Condenser, E-6631. In the MEG
Splitter, the MEG is separated from the heavier glycols, withdrawn as a liquid sidestream
and sent to Section “A” of the MEG Column Hotwell or to the Eighth Effect Evaporator, C-
6538 (Dwg. 65-SD-1056). Boil-up heat for the MEG Splitter is provided by 21 Barg steam
in the MEG Splitter Reboiler, E-6630, which is designed for suppressed vaporization to
reduce fouling. The MEG Splitter Bottoms Pumps, P-6630A/B, provide recirculation for the
MEG Splitter Reboiler and transfer the net bottoms of the MEG Splitter to the DEG Column,
C-6710 (Dwg. 67-SD-1071).

The vacuum bleeds from the MEG Column Vacuum Pump System, and the MEG Splitter
Vacuum Pump System, EJ-6632, are sent to Section "B" of the MEG Column Hotwell.

The vents from the vacuum pump systems are sealed in Section "B" of the DEG/TEG
Column Hotwell, SU-6710 (Dwg. 67-SD-1071).

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page 2.1.2 - 19
Rev 3 – 09/07/2016

G. DEG AND TEG PURIFICATION SECTION

Flowsheets 67-SD-1071/67-SD-1072

Summary

Heavy glycols from the MEG Splitter bottoms are distilled in the DEG Column where the
diethylene glycol (DEG) product is taken overhead. The DEG product is cooled and sent to
OSBL storage. The DEG Column bottoms are then sent to the TEG Column for further
distillation where the triethylene glycol (TEG) product is taken overhead. The TEG product
is cooled and sent to OSBL storage. The TEG Column bottoms are sent to OSBL for
incineration.

Details

The bottoms from the MEG Splitter, C-6630 (Dwg. 66-SD-1065), are pumped to the DEG
Column, C-6710, which is packed with structured packing and operates at a top pressure of
10 mm Hg Abs. If necessary, the DEG Column feed can be cooled in the Crude Heavy
Glycol Cooler, E-6715, and stored in Section “A” of the Crude Glycol Tank, TK-6615B
(Dwg. 66-SD-1061) and then pumped to the DEG Column via the Crude Heavy Glycol
Pump, P-6715. The DEG Column overheads are condensed in the top-mounted knock-back
DEG Column Condenser, E-6711. Vacuum is maintained in the system by the DEG/TEG
Column Vacuum Pump System, EJ-6712. Boil-up heat for the DEG Column is supplied by
21 Barg steam in the DEG Column Reboiler, E-6710, which is designed for suppressed
vaporization to reduce fouling.

The DEG Column overhead condensate accumulates in a chimney draw-off tray located
below a pasteurization packed section. Part of the condensate is returned as reflux to the
column via the DEG Column Reflux Pumps, P-6711A/B. The remainder is taken as DEG
product and cooled to 48°C in the DEG Product Cooler, E-6712. The cooled DEG product is
then passed through the DEG Product Resin Drum, V-6730, to reduce the aldehyde content
in the DEG product, before sending to OSBL.

To purge impurities from the DEG Column System, a liquid purge is taken from the catch
pan at the top of the column and sent to the Glycol Sump, SU-6971 (Dwg. 69-SD-1094).

The DEG Column bottoms are pumped by the DEG Column Bottoms Pumps, P-6710A/B, to
the TEG Column, C-6720, for TEG distillation.

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
SABIC – Clariant Partnership Company

SD Project No. 53133

Page 2.1.2 - 20
Rev 3 – 09/07/2016

Details (Continued)

The TEG Column is packed with structured packing and operates at a top pressure of 10 mm
Hg abs. The TEG Column overheads are condensed in the top-mounted knock-back TEG
Column Condenser, E-6721. Vacuum is also maintained in the system by the DEG/TEG
Column Vacuum Pump System. Boil-up heat for the TEG Column is supplied by 21 Barg
steam in the TEG Column Reboiler, E-6720, which is designed for suppressed vaporization
to reduce fouling.

The TEG Column overhead condensate accumulates in a chimney drawoff tray located
below a pasteurization packed section. Part of the condensate is returned to the column as
reflux via the TEG Column Reflux Pumps, P-6721A/B, while the remainder (TEG product)
is cooled 48°C in the TEG Product Cooler, E-6722. The cooled TEG product is then passed
through the TEG Product Resin Drum, V-6740, to reduce the aldehyde content in the TEG
product, before sending to OSBL.

A liquid distillate purge is taken from the catch pan at the top of the column and recycled
back to the DEG Column. The column bottoms, consisting of some TEG plus heavier
polyethylene glycols, are pumped by the TEG Column Bottoms Pumps, P-6720A/B, to
OSBL for incineration.

The vacuum pump bleeds from the DEG/TEG Column Vacuum Pump System are sent to
Section "B" of the DEG/TEG Column Hotwell, SU-6710. The vents from the MEG Column
Vacuum Pump System, E-6622 (Dwg. 66-SD-1064), the MEG Splitter Vacuum Pump
System, E-6632 (Dwg. 66-SD-1065), and the DEG/TEG Vacuum Pump System are sealed in
Section "B" of the DEG/TEG Column Hotwell.

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page 2.1.2 - 21
Rev 3 – 09/07/2016
H. MISCELLANEOUS UTILITIES, STEAM AND
CONDENSATE SYSTEMS SECTION

Flowsheets 69-SD-1091/69-SD-1092/69-SD-1093/69-SD-1094

Steam and Condensate Systems

Steam condensates from the 21.4 Barg and 13.3 Barg steam users are collected in the upper
drum of the Condensate Flash Drum, V-6920, operating at 10 Barg. Flash steam from the
upper drum is sent to the 4 Barg steam header while the flash condensate at 184°C is sent to
the BFW/Condensate Exchanger, E-6920A/B, where it is cooled by preheating the boiler
feed water from 105°C to 165°C. The cooled clean condensate at about 116°C is then sent
to the bottom drum of the Condensate Flash Drum.

The steam condensate from the Fourth Stage Reactor Feed Heater, E-6524 (Dwg. 65-SD-
1052), which could potentially contain EO, is sent to the middle drum of the Condensate
Flash Drum operating at 1 Barg. The flash steam from the middle drum is used as stripping
steam in the Glycol Feed Stripper, C-6510 (Dwg. 65-SD-1052). The condensate from the
middle drum is pumped as suspect condensate via the Suspect Condensate Pumps, P-
6925A/B to the Suspect Condensate Cooler, E-6935, where it is cooled to 100°C and then
sent to OSBL.

Low pressure steam condensates from the Regenerator Reboiler, E-6220 (Dwg. 62-SD-
1021), and the Stripping Column Reboiler, E-6310 (Dwg. 62-SD-1031) are fed to the bottom
drum of the Condensate Flash Drum operating at 1 Barg. For pressure control, 4 Barg steam
is injected into the bottom drum. Also fed to the bottom drum, during start-up only, are the
Reactor Steam Drums blowdown from the Reactor Start-up Pumps, P-6110/P-6120 (Dwg.
61-SD-1011) and the blowdown from the Reactor Gas Cooler Steam Drums, V-6112/V-
6122 (Dwg. 61-SD-1011). Flash steam from the bottom drum, is sent to the
Regenerator/Regenerator Feed Flash Drums, C-6220 (Dwg. 62-SD-1021). The low pressure
clean condensate from the bottom drum is pumped by the Clean Condensate Pumps, P-
6920A/B, to users. A portion of the condensate is cooled in the Process Water Cooler, E-
6960, stored in the Process Water Tank, TK-6960, and pumped to process water users via
the Process Water Pumps, P-6960A/B. The balance of the clean condensate not used in the
process is pumped to OSBL. Condensate blowdowns from the Reactor Steam Drums, V-
6110/V-6120 (Dwg. 61-SD-1011) and the Reactor Gas Cooler Steam Drums, V-6112/V-
6122 (Dwg. 61-SD-1011) are sent to the Blowdown Flash Drum, V-6930. The flash steam
from the drum is sent to the Regenerator/Regenerator Feed Flash Drums, C-6220 (Dwg. 62-
SD-1021) and the condensate at 120°C is pumped to the OSBL Demineralizer via the
Blowdown Pumps, P-6930A/B.

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page 2.1.2 - 22
Rev 3 – 09/07/2016
Waste Water System

Waste water from the Cycle Water Treating Unit, PK-6550 (Dwg. 65-SD-1051) is collected
in Neutralization Sump, SU-6975 while the condensates from the KO Drum Section of the
Wash Tower, C-6115 (Dwg. 61-SD-1012), the Aldehyde Stripper Waste Water Cooler, E-
6560 (Dwg. 65-SD-1052), the Drying Column Reflux Pumps, P-6611A/B (Dwg. 66-SD-
1061), the Reclaim Compressor KO Drum, V-6320 (Dwg. 63-SD-1032), and the Section
“B” condensate of the DEG/TEG Column Hotwell, SU-6710 (Dwg. 67-SD-1071) are
collected in the Waste Water Sump, SU-6970. The waste water is pumped by the Waste
Water Pumps, P-6970A/B and the Neutralization Pumps, P-6975A/B to the OSBL treatment
plant.

Miscellaneous liquid drains and purges containing carbonate solution are collected in the
Carbonate Sump, SU-6972 and pumped by the Carbonate Sump Pumps, P-6972A/B to the
Carbonate Storage Tank, TK-6230 (Dwg 62-SD-1021). Miscellaneous liquid drains and
purges containing glycols are collected in the Ethylene Glycol Sump, SU-6971, and pumped
by the Ethylene Glycol Sump Pumps, P-6971A/B for disposal.

Nitrogen System

Low pressure nitrogen at 7 Barg enters the battery limits and is used for ejectors suction
pressure control, tanks padding and purging, and vacuum breaking services. In addition,
nitrogen is used for initial pressurization of the reaction system.

A dedicated supply of high pressure nitrogen is provided by intermittently compressing a

portion of the 7 Barg nitrogen supply in the High Pressure Nitrogen Compressor, K-6950, to
60 Barg. The high pressure nitrogen is stored in the High Pressure Nitrogen Surge Drum, V-
6950, and is used for start-up/shutdown purging of the Oxygen Mixing Station Sparger, MX-
6110 (Dwg. 61-SD-1011), and for pressurization of the Moderator Feed Drum, V-6140
(Dwg 61-SD-1011). The surge capacity of the High Pressure Nitrogen Surge Drum will
provide enough nitrogen for approximately eight (8) Oxygen Mixing Station Sparger start-
up/shutdown sequences.

Cooling Water Booster Pumps

Cooling Water Booster Pumps, P-6910A/B, are provided to pump cooling water to process
users that require higher pressure than normally available, which is 7 Barg at the battery
limits. The cooling water from the booster pumps is used in the MEG Splitter Condenser, E-
6631 (Dwg. 66-SD-1065), the DEG Column Condenser, E-6711 (Dwg. 67-SD-1071), and
the TEG Column Condenser, E-6721 (Dwg. 67-SD-1072).

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
SABIC – Clariant Partnership Company

SD Project No. 53133

2.2

PROCESS FLOWSHEETS

INDEX
Page

A. PROCESS FLOWSHEETS 2.2 - 1

B. MATERIAL BALANCES 2.2 - 2

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
SABIC – Clariant Partnership Company

SD Project No. 53133

Page 2.2 - 1

2.2

PROCESS FLOWSHEETS

A. PROCESS FLOWSHEETS

Flowsheet No. Flowsheet Title

00-SD-0001 Symbols and Nomenclature

00-SD-0002 Symbols and Nomenclature Typical Piping Components

61-SD-1011 EO Reaction System

61-SD-1012 EO and CO2 Scrubbing

62-SD-1021 CO2 Removal System

63-SD-1031 EO Stripping
63-SD-1032 EO Reabsorption

65-SD-1051 Recycle Water System and Cycle Water Treating Unit

65-SD-1052 Glycol Reaction
65-SD-1053 1st - 3rd Effect Evaporators
65-SD-1054 4th and 5th Effect Evaporators
65-SD-1055 6th and 7th Effect Evaporators
65-SD-1056 Eighth Effect Evaporator

66-SD-1061 Glycol Drying

66-SD-1062 Glycol Purification
66-SD-1063 MEG Product Rundown
66-SD-1064 MEG Column Ejector
66-SD-1065 MEG Splitter

67-SD-1071 DEG Purification

67-SD-1072 TEG Purification

69-SD-1091 Condensate System

69-SD-1092 HP Nitrogen System and Miscellaneous Utilities
69-SD-1093 Process Water System and Waste Water System
69-SD-1094 Carbonate Sump and Glycol Sump Collection Systems

Confidential Information of Scientific Design Company, Inc.

 A B C D E F G H J K

NOTES:
1. ILLUSTRATION ASSUMES FLOW TO BE LEFT TO RIGHT IN THIS EXAMPLE.
LINES, CONNECTORS AND ETC. HEAT EXCHANGERS COMMON SYMBOLS
2. THIS DRAWING DOCUMENTS ONLY A PARTIAL LISTING OF COMMONLY
USED PFD SYMBOLOGY.

3. VALVES WHICH ARE NORMALLY CLOSED ARE SO INDICATED BY

1 "DARKENED IN" SYMBOL. 1
PRIMARY (AG AND UG) GENERIC 1 EXAMPLE:
NORMALLY CLOSED GATE VALVE

NORMALLY CLOSED BUTTERLY VALVES ARE INDICATED BY THE

SECONDARY / UTILITY (AG AND UG) ABBREVIATION "NC".

4. XX = UTILITY SERVICE (SEE LINE SERVICE CODES ON DWG. 00-SD-0002).

FURNACE/HEATER HORIZONTAL VESSEL

INSTRUMENT GENERIC 2

ELECTRICAL SIGNAL LINE

2 2
STREAM NUMBER
PLATE TYPE

OFF-DRAWING CONNECTOR
PRESSURE (barg)
VERTICAL VESSEL
TEMPERATURE - oC

OFF-UNIT CONNECTOR
AIR COOLER BOILER

4 XX UTILITY CONNECTOR
3 3

COOLING TOWER

NOTE REFERENCE

REFERENCE DRAWING TITLE

PACKED VESSEL
STORAGE TANK
PIPING VALVE

MECHANICAL EQUIPMENT
4 REV DATE PROCESS CTRL SYS PIP EICS PROJ 4
GENERIC 2-WAY VALVE

Scientific Design Co., Inc.

Little Ferry, New Jersey
PUMP SD Project No. 53133

INSTRUMENT

STORAGE SPHERE

GENERIC REV DATE REVISIONS APPR.

This drawing and all information thereon is the property of "United" and shall not be
BLOWER TRAYED VESSEL reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
other than that for which it is specifically furnished without the priorwritten consent
of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 to "United.". 5
This space is reserved for the Arabic translation of the above paragraph.
CONTROL VALVES

COMPRESSOR /
EXPANDER

GENERIC 2-WAY CONTROL VALVE

POND
JUBAIL UNITED
PETROCHEMICAL COMPANY
JUPC EG-III

GENERIC 3-WAY CONTROL VALVE

PROCESS FLOW DIAGRAM
OVERALL PLANT
FILTER
6 SYMBOLS AND NOMENCLATURE 6

GENERIC REGULATOR VALVE AGITATOR SCALE: None CHECKED: EG/RG

DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
FILENAME:53133-00-SD-0001
SHT.: REV.
DWG. 00-SD-0001 0
A B C D E F G H J K
 A B C D E F G H J K

NOTES:
ABBREVIATIONS 1 2 VALVE SYMBOLS PIPING SPECIALITY ITEMS PIPING LINE SYMBOLS LINE SERVICE CODES
1. ILLUSTRATION ASSUMES FLOW TO BE LEFT TO RIGHT IN THIS EXAMPLE.
AG ABOVE GROUND NIL NORMAL INTERFACE LEVEL GATE (OR GENERIC) Y-TYPE STRAINER PRIMARY (AG AND UG) AB BREATHING AIR
2. VALVES WHICH ARE NORMALLY CLOSED ARE SO INDICATED BY
ATM ATMOSPHERE NLL NORMAL LIQUID LEVEL AC COMBUSTION AIR "DARKENED IN" SYMBOL.
BB BLOWBACK NNF NORMALLY NO FLOW AD DRYING AIR EXAMPLE:
BL BATTERY LIMIT SECONDARY / UTILITY (AG AND UG)
NO NORMALLY OPEN CHECK CONE STRAINER AI INSTRUMENT AIR
NORMALLY CLOSED GATE VALVE
BTL BOTTOM TANGENT LINE NOZ NOZZLE AP REGENERATION AIR
1 1
BYP BYPASS O/C OPEN/CLOSE FUTURE AND EXISTING ON NEW P&IDs AR PLANT AIR (UNITED REQUEST) NORMALLY CLOSED BUTTERLY VALVES ARE INDIATED BY THE
C CLOUD O/O ON/OFF STOP CHECK T-TYPE STRAINER BC COLD BLOWDOWN ABBREVIATION "NC".
CC CHEMICAL CLEANOUT OP OUTPUT BH HOT BLOWDOWN
JACKETED OR DOUBLE CONTAINMENT 3. DEFINED BY INSTRUMENT PIPING AND TUBING SPECIFICATION..
CL CENTERLINE OSBL OUTSIDE BATTERY LIMITS BL LOW PRESSURE BLOWDOWN
CO CLEANOUT OVHD OVERHEAD GLOBE DUPLEX STRAINER BO BOILER BLOWOFF 4. WORK BREAK DOWN STRUCTURE NUMBER WILL NOT APPEAR ON P&ID
CONN CONNECTION PES SLOPE REQUIREMENT CA CATALYST CALLOUT. IT IS INFERRED BY A NOTE IN THE NOTES COLUMN. EXAMPLE:
PROGRAMMABLE ELECTRONIC SYSTEM
ALL SPECIALTY ITEMS ARE PREFIXED BY XX UNLESS NOTED OTHERWISE.
CSC CAR SEAL CLOSED (FOR SAFETY INSTRUMENTED SYSTEM) CL CHLORINE
CSO CAR SEAL OPEN PLC PROGRAMMABLE LOGIC CONTROLLER BUTTERFLY BASKET STRAINER CPS PHOSPHATE SOLUTION
CTR CENTER PRESS PRESSURE DA ACID SEWER
DCS DISTRIBUTED CONTROL SYSTEM PV PROCESS VARIABLE LINE DATA IDENTIFICATION DB BENZENE SEWER
DE DE-ENERGIZED (R) RELOCATED NEEDLE TEMPORARY STRAINER DC CAUSTIC SEWER
DES DESIGN REQD REQUIRED DCH CHEMICAL SEWER
WBS - SERVICE - SEQUENCE - LINE CLASS - SIZE - INSUL
DIA DIAMETER ROC RATE OF CHANGE DM DMDS DRAIN
DSP DISPLACE TYPE LEVEL TRANSMITTER RTD RESISTANCE TEMPERATURE DETECTOR BALL FILTER XX - XXX - XXXX - XXXX - XXXX - XX DO OILY WATER SEWER
DP DESIGN PRESSURE SC SAMPLE CONNECTION DP PROCESS SEWER
D/P DIFFERENTIAL PRESSURE SCH SCHEDULE DR STORM SEWER
DS
2 DRN DRAIN SD SHUTDOWN ORBIT D DETONATION ARRESTOR OFF-PAGE AND DRAIN CONNECTORS SANITARY SEWER
2
DT DESIGN TEMPERATURE SDA SETPOINT DEVIATION ALARM EF POND EFFLUENT
DWG DRAWING SEQ SEQUENCE CONTROL PROGRAM GF FUEL GAS
(E) EXISTING SG SPECIFIC GRAVITY GENERIC ROTARY (1/4 TURN) F FLAME ARRESTOR OFF-PLOT CONNECTOR GH HYDROGEN
E ENERGIZED SIS SAFETY INSTRUMENTED SYSTEM GI INERT GAS (NITROGEN)
EIV EMERGENCY ISOLATION VALVE SO STEAM OUT SERVICE DESCRIPTION GLR GLYCOL RETURN
T
EL ELEVATION SP SET POINT PLUG STEAM TRAP CONNECTOR NUMBER XXXXX P&ID NO GLS GLYCOL SUPPLY PRESSURE (barg)
ESD EMERGENCY SHUTDOWN SS STAINLESS STEEL ORIGIN/DESTINATION GN NATURAL GAS
FOF FACE OF FLANGE S/S START/STOP HCL HYDROCHLORIC ACID TEMPERATURE - oC
(F) FURNISHED STD STANDARD POST INDICATOR EJECTOR/EDUCTOR HS SULFURIC ACID
PRIMARY / SECONDARY AND INSTRUMENT SIGNAL CONNECTOR
FC FAIL CLOSED T/C THERMOCOUPLE HOR HOT OIL RETURN
FI FAIL INDETERMINATE TDH TOTAL DIFFERENTIAL HEAD SERVICE DESCRIPTION HOS HOT OIL SUPPLY
FL FAIL LOCKED (LAST POSITION) TEMP TEMPERATURE DIAPHRAGM CONNECTOR NUMBER XXXXX P&ID NO IN INHIBITOR
FLG FLANGE THRD THREADED PULSATION DAMPENER ORGIN/DESTINATION KC CAUSTIC
FO FAIL OPEN TL TANGENT LINE KCS SPENT CAUSTIC
3-WAY
FP FULL PORT TSO TIGHT SHUT-OFF KO OXYGEN
FV FULL VACUUM T/T TANGENT TO TANGENT KP CHEMICALS
GC GAS CHROMATIGRAPH TYP TYPICAL S IN-LINE SILENCER
3 4-WAY ME METHANOL 3
GO GEAR OPERATED UG UNDERGROUND UTILITY CONNECTOR NH HIGH PRESSURE PURIFIED NITROGEN
GR GRADE (V) VENDOR NL LOW PRESSURE PURIFIED NITROGEN
H HIGH VAC VACUUM CONNECTOR NUMBER XXX OC COOLING OIL
PINCH
HDR HEADER VB VORTEX BREAKER S VENT SILENCER SERVICE DESCRIPTION YYY OF FUEL OIL
HH HAND HOLE VHP VERY HIGH PRESSURE DESTINATION PID NO OH HYDRAULIC OIL
HLL HIGH LIQUID LEVEL VNT VENT OL LUBE OIL
MINIMUM FLOW/BYPASS
HIL HIGH INTERFACE LEVEL W/ WIDTH OS SEAL OIL
CLOSED DRAIN
HHIL HIGH HIGH INTERFACE W/O WITHOUT REMOVABLE SPOOL OW WASH OIL
RS
HHLL HIGH HIGH LIQUID LEVEL ANGLE OX SLOP OIL
HOA HAND/OFF/AUTO REFERENCE DRAWING TITLE
HP HIGH PRESSURE
INSULATION TYPE CODES FLEXIBLE HOSE
CONNECTOR NUMBER XXXXX
P PROCESS PIPING
PC PROCESS CONDENSATE
HPT HIGH POINT LINE SERVICE CODE YYY
CJ CHILLED FLUID JACKETED KNIFE PE PE WASTEWATER
IAS INSTRUMENT AIR SUPPLY DESTINATION PID NO
CP CONDENSATION CONTROL RE ETHYLENE REFRIGERATION
ID INTERNAL DIAMETER CT CHILLED FLUID TRACED EXPANSION JOINT RP PROPYLENE REFRIGERATION
ISBL INSIDE BATTERY LIMITS OPEN DRAIN
ET ELECTRIC TRACED SA SERVICE AIR
L LOW SLIDE
FP FIRE PROTECTION INSULATION SC SUBCOOLED CONDENSATE
4 LC LOCKED CLOSED HJ HOT FLUID JACKETING DAMPER CONNECTOR NUMBER XXXXX SCD PROCESS CONDENSATE DIRTY REV DATE PROCESS CTRL SYS PIP EICS PROJ
4
LIL LOW INTERFACE LEVEL HT HOT FLUID TRACED RAM LINE SERVICE CODE YYY SCH HIGH PRESSURE STEAM CONDENSATE
LLIL LOW LOW INTERFACE LEVEL IA ACOUSTIC CONTROL INSULATION DESTINATION PID NO SCL LOW PRESSURE STEAM CONDENSATE
LLL LOW LIQUID LEVEL IC COLD SERVICE INSULATION BREATHER SCM MEDIUM PRESSURE STEAM CONDENSATE Scientific Design Co., Inc.
LLLL LOW LOW LIQUID LEVEL IH HEAT CONSERVATION INSULATION SCS SUSPECT CONDENSATE Little Ferry, New Jersey
LO LOCKED OPEN
LP LOW PRESSURE
IS PERSONAL PROTECTION INSULATION PIPING FITTINGS SPRAY NOZZLE
SCR MEDIUM PRESSURE REDUCED CONDENSATE SD Project No. 53133
PF PREVENTION FROM FREEZING INSULATION SH HIGH PRESSURE STEAM
LPT LOW POINT PS PROCESS STABILITY INSULATION SL LOW PRESSURE STEAM
FLANGE
MAX MAXIMUM SJ STEAM JACKETED SM MEDIUM PRESSURE STEAM
MIN MINIMUM VENT COVER
MOV MOTOR OPERATED VALVE
ST STEAM TRACED WELDED CONNECTION MISCELLANEOUS SMR MEDIUM PRESSURE REDUCED STEAM
SPD PROCESS STEAM DIRTY
MTL MATERIAL SV VERY HIGH PRESSURE STEAM
CAP
MW MANWAY VENT COVER W/ SCREEN VA ATMOSPHERIC VENT 1 04/21/16 PER P&ID REVIEW
xxxx PURGE CONNECTION
NC NORMALLY CLOSED WA POTABLE WATER REV DATE REVISIONS APPR.
CONCENTRIC (OR GENERIC) REDUCER P (XXXX = PURGE PRESSURE AND MEDIUM)
WB BOILER FEED WATER This drawing and all information thereon is the property of "United" and shall not be
IN-LINE MIXER reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
ECCENTRIC REDUCER xxxx SAMPLE CONNECTION WBV VERY HIGH PRESSURE BOILER FEEDWATER other than that for which it is specifically furnished without the priorwritten consent
SC
(XX/YY = TYPE/NUMBER WBZ BENZENE CONTAMINATED OILY WATER of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 WC COOLING WATER SUPPLY to "United.". 5
HOSE CONNECTION
EXCESS FLOW VALVE WD DRINKING WATER
NOTE REFERENCE SYMBOL This space is reserved for the Arabic translation of the above paragraph.
XX WF FIRE WATER
(XX = NOTE NUMBER, ROTATE ARROW AS REQUIRED)
SPACER WI DEMINERALIZED WATER
EXHAUST HEAD WJ JACKET WATER
T TIE-IN SYMBOL
BLANK (XXXX = IDENTIFICATION NUMBER) WL CHILLED WATER SUPPLY
WM CHILLED WATER RETURN
WP PROCESS WATER (R-1)
OPEN FIGURE 8 BLIND WPE PELLET WATER
JUBAIL UNITED
SAFETY/SHOWER EYEWASH POINT OF CHANGE
IN LINE CLASS OR INSULATION REQUIREMENT
WQ QUENCH WATER PETROCHEMICAL COMPANY
WR COOLING WATER RETURN
CLOSED FIGURE 8 BLIND
OR VENDOR BREAK
WRC RECOVERY WATER JUPC EG-III
WS WASTE SLUDGE
VALVE PLUG WSE SERVICE WATER
WSR SEAWATER RETURN
PIPING AND INSTRUMENTATION DIAGRAM
BLIND FLANGE
SP - XXXX PIPING SPECIALTY ITEM WSS SEAWATER SUPPLY OVERALL PLANT
6 TANGENTIAL ENTRY
PACKAGED EQUIPMENT LINES
WWN NEUTRALIZED WASTEWATER
SYMBOLS AND NOMENCLATURE 6
WWT TREATED WASTEWATER

BATTERY LIMITS (OR MATCH LINE)

TYPICAL PIPING COMPONENTS
SWING ELBOW
SCALE: None CHECKED: EG/RG
GRADE SYMBOL DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
ISOLATING FLANGE
FILENAME: 53133-00-SD-0002
SHT.: REV.
DWG.
00-SD-0002 1
A B C D E F G H J K
 A B C D E F G H J K

P-6110 V-6110 F-6110A/B R-6150 F-6150A/B R-6110 V-6112 E-6111 MX-6110 K-6115 V-6140
REACTOR REACTOR OXYGEN SULFUR GUARD ETHYLENE REACTOR/GAS REACTOR GAS COOLER GAS-GAS OXYGEN MIXING RECYCLE MODERATOR FEED
GENERAL:
START-UP PUMP STEAM DRUM FILTERS BED FILTER COOLER STEAM DRUM EXCHANGER STATION SPARGER COMPRESSOR DRUM 1. SD DRAWINGS 00-SD-0001 AND 00-SD-0002 FOR STANDARD SYMBOLS
690 m³/h 245.4 m³ 37 m³ 29.01 MW/11.26 MW (SOR) 93.2 m³ 54.37 MW (SOR)
1,519,200 Std. m³/h 1.6 m³ AND NOMENCLATURE.
31.23 MW/26.03 MW (EOR) 59.73 MW (EOR) 2. PRODUCTION IS BASED ON 8,000 OPERATING HOURS PER YEAR.
307.8 MW/210.1 MW (DES) 3. DESIGN REACTOR PRODUCTION IS 548,500 MTPY OF ETHYLENE OXIDE.
CASE 1 CASE 2
WATER/
1 40
AMB EO DESIGN ZERO STEAM 1
ETHYLENE MOLAR 25/1 17/1
OSBL 101 RATIO SOR EOR SOR EOR
Sel. 91.0% 86.0% 90.2% 85.7%
FC EO 2.2 2.2 2.6 2.3
R-6150
CASE 1 CASE 2
4. PLANT PRODUCTION (MTPY)
DESIGN ZERO STEAM
MONOETHYLENE GLYCOL (MEG) 700,000 700,000
DIETHYLENE GLYCOL (DEG) 53,830 97,140
TREMETHYLENE (TEG) 3040 5700
F-6150A/B PURIFIED EO (EO) 0 0
5. STANDARD CONDITIONS ARE 1.01325 barA AND 150C .
6. COOLING WATER SUPPLY TEMPERATURE IS 39 0C.
7. (NOR) - NORMAL OPERATION
(SOR) - START-OF-RUN
21 MIN FC (EOR) - END-OF-RUN
AMB
METHANE
OSBL
NOTES:
103
1. FOLLOWING ITEMS IN THE PARALLEL REACTOR TRAIN ARE
2 NOT SHOWN: V-6120, V-6122, E-6121, P-6120, AND R-6120. 2
2. MATERIAL BALANCES ARE BASED ON CASE 2 START-OF-RUN.
27 MIN FC HP NITROGEN 3. REACTOR STEAM DRUM STEAM, REACTOR GAS COOLER STEAM DRUM
AMB STEAM, AND BOILER FEED WATER FLOWS ARE BASED ON CASE 2.
OXYGEN 69-SD-1092
OSBL 102 FROM V-6950
24
PRESSURE (barg)
F-6110A/B
MP STEAM FROM V-6120
63,100 kg/h (SOR) TEMPERATURE - oC
60,190 kg/h (EOR) MODERATOR
PC V-6140
FT 21
126,200 kg/h (SOR)
121,820 kg/h (EOR)
SM

FFC
190 SOR
FT 200 EOR
START-UP ONLY IP STEAM FROM V-6122 245 MAX
3 SH 17,140 kg/h (SOR) 3
43,200 kg/h (EOR) 198 EOR HP NITROGEN FOR PURGING
36,600 kg/h (SOR) 203
PER REACTOR 29.6 58.5 20.71 SOR 69-SD-1092
SI MX-6110 FROM V-6950
SOR EOR PC
WB E-6111 104
LC 13.3 MAX SOR EOR
34,280 kg/h (SOR) TC
165 SOR 86,400 kg/h (EOR) LC
64,390 kg/h (SOR) V-6110 35.5 15.6 14.0 TO E-6121 IN PARALLEL
155 EOR 106
62,155 kg/h (EOR) 165 SOR REACTION SYSTEM
155 EOR
R-6110 SOR 215
WB V-6112 EOR 227 REFERENCE DRAWING TITLE
235 SOR
275 EOR
BLOWDOWN 1290 kg/h (SOR) 17,490 kg/h (SOR) 105
1245 kg/h (EOR) 44,080 kg/h (EOR) RICH CYCLE GAS
69-SD-1091
107 109 61-SD-1012
TO V-6930
TO E-6115
STARTUP BLOWDOWN
NNF 19.51 NNF PC
69-SD-1091
59 STARTUP LEAN CYCLE GAS
4 TO V-6920
112 61-SD-1012
REV DATE PROCESS CTRL SYS PIP EICS PROJ 4
START-UP ONLY
SH FROM E-6121 IN PARALLEL FROM E-6115
4,100 kg/h PER COOLER REACTION SYSTEM 108 21.06
18.04 NOR Scientific Design Co., Inc.
P-6110 Little Ferry, New Jersey
BLOWDOWN 350 kg/h (SOR)
880 kg/h (EOR) SD Project No. 53133
69-SD-1091
TO V-6930 K-6115

STREAM NUMBER 101 102 103 104 105 106 107 108 109
STREAM DESCRIPTION ETHYLENE OXYGEN METHANE TOTAL FEED TO FEED TO REACTOR REACTOR TOTAL
FEED FEED BALLAST REACTOR REACTOR REACTOR R- 6110 R- 6120 REACTOR
FEED R- 6110 R- 6120 OUTLET OUTLET OUTLET 2 09/07/16 REVISED PER EPDP MEETING
1 04/05/16 PER CLIENT COMMENTS
REV DATE REVISIONS APPR.
MOLE FRACTION LIQUID 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
TEMPERATURE (°C) 35 35 35 57 57 57 86 86 86 This drawing and all information thereon is the property of "United" and shall not be
PRESSURE (barg) 40.0 27.0 21.0 21.0 21.0 21.0 18.9 18.9 18.9 reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
PHASE VAPOR VAPOR VAPOR VAPOR VAPOR VAPOR VAPOR VAPOR VAPOR
other than that for which it is specifically furnished without the priorwritten consent
of "United". The drawing and any copies thereof (partial or complete) shall be returned
VAPOR MASS FLOW RATE (kg/h) 51,828.0 44,084.1 163.1 1,537,032.8 768,516.4 768,516.4 768,516.4 768,516.4 1,537,032.8
5 to "United.". 5
VAPOR FLOW @ PRES & TEMP (m³/h) 867.5 1,240.6 11.4 75,333.8 37,666.9 37,666.9 45,886.2 45,886.2 91,772.4
VAPOR MOLECULAR WEIGHT 28.05 32.01 16.04 24.09 24.09 24.09 24.41 24.41 24.41
This space is reserved for the Arabic translation of the above paragraph.
VAPOR DEN @ PRESS &TEMP (kg/m³) 59.741 35.533 14.256 20.403 20.403 20.403 16.748 16.748 16.748
VAPOR VISCOSITY (cP) 0.010 0.021 0.011 0.015 0.015 0.015 0.015 0.015 0.015
LIQUID MASS FLOW RATE (kg/h)
LIQUID FLOW @ PRES & TEMP (m³/h)
LIQUID MOLECULAR WEIGHT
LIQUID DEN @ PRESS &TEMP (kg/m³)
LIQUID VISCOSITY (cP)
COMPOSITION (WT.%) JUBAIL UNITED
ETHYLENE 99.92 34.93 34.93 34.93 31.57 31.57 31.57
OXYGEN 99.75 10.09 10.09 10.09 7.24 7.24 7.24 PETROCHEMICAL COMPANY
ETHYLENE OXIDE
CARBON DIOXIDE
0.00
1.83
0.00
1.83
0.00
1.83
4.75
2.86
4.75
2.86
4.75
2.86
JUPC EG-III
WATER 0.36 0.36 0.36 0.78 0.78 0.78
NITROGEN 0.00 0.35 0.35 0.35 0.35 0.35 0.35
ARGON 0.24 19.40 19.40 19.40 19.40 19.40 19.40 PROCESS FLOW DIAGRAM
METHANE
ETHANE
0.03
0.05
100.00 32.04
1.01
32.04
1.01
32.04
1.01
32.04
1.00
32.04
1.00
32.04
1.00
ETHYLENE GLYCOL PLANT
6 MEG 0.00 0.00 0.00 0.00 0.00 0.00
EO REACTION SYSTEM 6
DEG
TEG
PEG
FORMALDEHYDE 0.00 0.00 0.00 0.00 0.00 0.00 SCALE: None CHECKED: EG/RG
ACETALDEHYDE 0.00 0.00 0.00 0.00 0.00 0.00
DATE: 03/11/16 APPROVED: SK
K2CO3
KHCO3 DRAWN: CAD APPROVED:
TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 FILENAME: 53133-61-SD-1011
SHT.: REV.
DWG. 61-SD-1011 2
A B C D E F G H J K
 A B C D E F G H J K

E-6116 P-6116A/B E-6115 C-6115 E-6117A/B F-6117

WASH WATER WASH TOWER
GENERAL:
WASH WATER WASH TOWER CARBONATE FEED/ CARBONATE SOLUTION
COOLER PUMPS FEED/BOTTOMS EXCHANGER EFFLUENT EXCHANGER FILTER 1. SD DRAWINGS 00-SD-0001 AND 00-SD-0002 FOR STANDARD SYMBOLS
18.56 MW 1668 m³/h 16.72 MW AND NOMENCLATURE.
62.63 MW

NOTES:
1 1
43 1. THE CO2 REMOVAL SYSTEM IS DESIGNED FOR A REACTOR
SELECTIVITY OF 77% AND 2% CO2 AT REACTOR INLET.
18.14
45 106
RICH CARBONATE SOL'N 2. POTASSIUM CARBONATE, BORIC ACID AND VANADIUM PENTOXIDE
MAKE-UP AND ANTIFOAM INJECTION QUANTITIES ARE NOT INCLUDED
111 114 62-SD-1021 IN THE MATERIAL BALANCE.
51 E-6116 TO C-6220
FC 3. INSTRUMENT FLUSHES ARE NOT INCLUDED IN THE MATERIAL BALANCE.
WR
118
LC
FI
121 80 113 FC
CONDENSATE
LEAN CARBONATE SOL'N
62-SD-1021 39
202 62-SD-1021
FROM P-6221A/B
FROM P-6220A/B
67
WASH WATER WC E-6117A/B
172,200kg/h NNF 115
62-SD-1021 120
1331 m³/h
FROM E-6222
LC 73 F-6117
2 2

FC
47 LC
WASH WATER 47
172,200kg/h RECLAIM GAS
62-SD-1021
316 63-SD-1032
TO E-6222 116 PRESSURE (barg)
119 FROM K-6320

TEMPERATURE - oC
RICH CYCLE WATER 57 FC
33
LEAN CYCLE WATER
63-SD-1031 110
306 63-SD-1031
TO E-6312 18.38
86 70 2 FROM P-6312A/B
RICH CYCLE GAS 1
61-SD-1011 109
FROM E-6111/E-6121 52 LC
E-6115
LEAN RECYCLE GAS 45
CARRY OVER
61-SD-1011 112 NNF
3 62-SD-1021 3
TO K-6115
FC TO C-6220
CYCLE GAS PURGE CARRY OVER
C-6115 LC
OSBL 113 63-SD-1031
TO INCINERATOR TO C-6310
WASH WATER 47
62-SD-1021 117 CARRY OVER
TO C-6220 FLASH DRUM NNF
69-SD-1093
TO WASTE WATER SUMP

REFERENCE DRAWING TITLE

P-6116A/B

STREAM NUMBER 110 111 112 113 114 115 116 117 118 119 120 121
STREAM DESCRIPTION RICH CYCLE WASH TOWER LEAN CYCLE CYCLE GAS RICH WASH WATER PRE- WASH WATER WASH WATER SCRUBBER CONTACTOR CONTACTOR
WATER OVERHEAD GAS TO PURGE CARBONATE FROM SATURATOR PURGE TO OVERHEADS FEED GAS OVERHEADS
4 RECYCLE SOLUTION CARBONATE BOTTOMS CARBONATE REV DATE PROCESS CTRL SYS PIP EICS PROJ 4
COMPRESSO KO DRUM KO DRUM
R
MOLE FRACTION LIQUID 1.0 0.0 0.0 0.0 1.0 1.0 1.0 1.0 1.0 0.0 0.0 0.0 Scientific Design Co., Inc.
TEMPERATURE (°C) 57 45 45 45 106 68 47 47 43 34 66 80 Little Ferry, New Jersey
PRESSURE (barg) 18.1 18.5 18.4 18.5 17.5 18.5 18.7 28.7 27.7 18.6 18.6 18.5 SD Project No. 53133
PHASE LIQUID VAPOR VAPOR VAPOR LIQUID LIQUID LIQUID LIQUID LIQUID VAPOR VAPOR VAPOR
VAPOR MASS FLOW RATE (kg/h) 1,441,638.8 1,441,120.7 518.6 1,452,990.8 1,468,515.9 1,458,576.9
VAPOR FLOW @ PRES & TEMP (m³/h) 78,975.1 79,358.4 28.4 75,417.5 85,667.7 89,935.9
VAPOR MOLECULAR WEIGHT 23.79 23.79 23.79 23.92 23.87 23.70
VAPOR DEN @ PRESS &TEMP (kg/m³) 18.254 18.160 18.254 19.266 17.142 16.218
VAPOR VISCOSITY (cP) 0.014 0.014 0.014 0.014 0.015 0.015 1 09/07/16 REVISED PER EPDP MEETING
REV DATE REVISIONS APPR.
LIQUID MASS FLOW RATE (kg/h) 1,954,805.2 1,787,818.9 1,220,703.0 1,208,737.0 4,972.1 1,203,764.9
This drawing and all information thereon is the property of "United" and shall not be
LIQUID FLOW @ PRES & TEMP (m³/h) 2,005.3 1,458.1 1,250.3 1,225.3 5.0 1,218.3 reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
LIQUID MOLECULAR WEIGHT 18.73 23.30 18.02 18.02 18.02 18.02 other than that for which it is specifically furnished without the priorwritten consent
of "United". The drawing and any copies thereof (partial or complete) shall be returned
LIQUID DEN @ PRESS &TEMP (kg/m³) 975 1,226 976 986 986 988 to "United.".
5 5
LIQUID VISCOSITY (cP) 0.491 0.621 0.411 0.578 0.576 0.622
This space is reserved for the Arabic translation of the above paragraph.
COMPOSITION (WT.%)
ETHYLENE 0.04 33.66 33.66 33.66 0.02 0.03 0.04 0.04 0.04 33.34 33.06 33.26
OXYGEN 0.00 7.71 7.71 7.71 0.00 0.00 0.00 0.00 0.00 7.65 7.57 7.62
ETHYLENE OXIDE 3.74 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
CARBON DIOXIDE 0.03 1.95 1.95 1.95 0.01 0.03 0.03 0.03 2.99 3.06 1.91
WATER 93.93 0.38 0.38 0.38 72.27 99.92 99.89 99.89 99.89 0.20 1.04 1.56 JUBAIL UNITED
NITROGEN 0.00 0.37 0.37 0.37 0.00 0.00 0.00 0.00 0.00 0.37 0.37 0.37 PETROCHEMICAL COMPANY
ARGON 0.01 20.68 20.68 20.68 0.00 0.01 0.01 0.01 0.01 20.51 20.31 20.44
METHANE 0.02 34.17 34.17 34.17 0.00 0.01 0.01 0.02 0.01 33.87 33.55 33.77 JUPC EG-III
ETHANE 0.00 1.07 1.07 1.07 0.00 0.00 0.00 0.00 0.00 1.06 1.05 1.06
MEG 2.21 0.00 0.00 0.00 3.58 0.01 0.01 0.01 0.01 0.00 0.00 0.00 PROCESS FLOW DIAGRAM
DEG ETHYLENE GLYCOL PLANT
TEG
6 PEG EO AND CO2 SCRUBBING 6
FORMALDEHYDE 0.02 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
ACETALDEHYDE 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
SCALE: None CHECKED: EG/RG
K2CO3 7.06 DATE: 03/11/16 APPROVED: SK
KHCO3 17.06 DRAWN: CAD APPROVED:
TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 FILENAME: 53133-61-SD-1012
SHT.: REV.
DWG. 61-SD-1012 1
A B C D E F G H J K
 A B C D E F G H J K

P-6220A/B P-6223A/B V-6223 E-6223 C-6220 E-6220 E-6222 V-6222 P-6230 P-6222A/B TK-6230 E-6221 V-6221 P-6221A/B
GENERAL:
CARBONATE REGENERATOR REGENERATOR REGENERATOR REGENERATOR/REGENERATOR REGENERATOR CARBONATE REGENERATOR CARBONATE REGENERATOR REGENERATOR REGENERATOR
REGENERATOR REGENERATOR
EXTRACTION EXTRACTION EXTRACTION TRANSFER PUMP PRECONDENSER CONDENSER CONDENSER KO DRUM 1. SD DRAWINGS 00-SD-0001 AND 00-SD-0002 FOR STANDARD SYMBOLS
SOLUTION PUMPS REBOILER REBOILER FEED FLASH DRUMS REBOILER PRECONDENSER PRECONDENSER KO DRUM STORAGE TANK CONDENSATE PUMPS
REBOILER CONDENSATE AND NOMENCLATURE.
2000 m³/h CONDENSATE CONDENSATE 38.03 MW (DES) 4.00 MW 266 m³/h PUMPS 790.7 m³ 20.96 MW (DES) 13.7 m³ 81.3 m³/h
PUMPS DRUM 19.4 MW 2.60 MW (NOR)
1.11 MW (NOR)
39.4 m³/h 3.4 m³ NNF 13.7 m³/h NOTES:
ATM
1 105
CARBONATE FLASH GAS 1. ANTIFOAM INJECTION IS NOT INCLUDED IN THE MATERIAL BALANCE. 1
206 63-SD-1032
47
WASH WATER TO E-6323
61-SD-1012 117
FROM P-6116A/B WASH WATER
EOR 1.14 61-SD-1012
CARRY OVER PC
NNF TO E-6116
61-SD-1012 PC ATM
FROM C-6115 SOR 0.95
106
RICH CARBONATE SOL'N
1.00 EOR
61-SD-1012 114
FROM E-6117A/B 67 OSBL
0.77 SOR
LC 60
204
E-6221 PC

105 0.41 207

0.2
2 106
LC 203 V-6222 2
E-6222 60
201 LC
NNF
WI
47
WASH WATER PRESSURE (barg)
172,200 kg/h V-6221
61-SD-1012 LC
3370 kg/h (NOR)
FROM P-6116A/B
9140 kg/h (DES) 85 TEMPERATURE - oC
SL TO STRIPPING COLUMN
FLOW CONTROL
69-SD-X-1091 205 63-SD-1031
TO C-6310
SELECTOR SWITCH
69-SD-X-1091 FC P-6222A/B
ANTIFOAM FROM 1700 (NOR) FLASH STEAM
DOSING BOTTLE 2810 (DES)
69-SD-1091
FROM V-6920/6930

FC FC TO WASTE WATER SUMP

3 146 208 3
EXTRACTION STEAM 69-SD-1093
SL
65-SD-1055 573 NNF
FROM C-6536 2200 kg/h (NOR) TK-6230
65,000 kg/h (DES) NNF
CONDENSATE
C-6220 SL
65-SD-1056 E-6220
TO V-6538
113
LEAN CARBONATE SOL'N
E-6223 SCL
61-SD-1012 202
TO E-6117A/B LC V-6223 SCL
REFERENCE DRAWING TITLE
SEAL FLUSH

REGEN CONDENSATE P-6220A/B P-6223A/B P-6230 P-6221A/B CARBONATE SOLUTION

61-SD-1012
69-SD-1094
TO C-6115/P-6116A/B
FROM P-6972A/B

4 REV DATE PROCESS CTRL SYS PIP EICS PROJ 4

STREAM NUMBER 201 202 203 204 205 206 207 208
STREAM DESCRIPTION TOTAL REGEN LEAN REGEN REGEN. PRE- REGEN. PRE- TOTAL REGEN. REGEN.
FEED FLASH CARBONATE OVERHEAD CONDENSER CONDENSER REGEN. FEED CONDENSER CONDENSER Scientific Design Co., Inc.
LIQUID SOLUTION VAPOR COND. FLASH VENT COND. Little Ferry, New Jersey
VAPOR
SD Project No. 53133
MOLE FRACTION LIQUID 1.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0
TEMPERATURE (°C) 106 113 105 85 85 106 60 60
PRESSURE (barg) 0.77 31.7 0.41 0.30 0.30 0.77 0.2 0.2
PHASE LIQUID LIQUID VAPOR VAPOR LIQUID VAPOR VAPOR LIQUID
VAPOR MASS FLOW RATE (kg/h) 26,879.4 20,879.4 2,876.0 17,518.4 2 09/07/16 REVISED PER EPDP MEETING
VAPOR FLOW @ PRES & TEMP (m³/h) 21,293.5 14,347.1 2,073.7 10,290.4 1 04/05/16 PER CLIENT COMMENTS
VAPOR MOLECULAR WEIGHT 27.73 32.78 24.31 38.89 REV DATE REVISIONS APPR.
VAPOR DEN @ PRESS &TEMP (kg/m³) 1.262 1.455 1.387 1.702 This drawing and all information thereon is the property of "United" and shall not be
VAPOR VISCOSITY (cP) 0.016 0.017 0.016 0.016 reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
other than that for which it is specifically furnished without the priorwritten consent
LIQUID MASS FLOW RATE (kg/h) 1,790,078.0 1,771,880.0 6,000.0 3,361.0 of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 LIQUID FLOW @ PRES & TEMP (m³/h) 1,460.4 1,454.2 6.2 3.4 to "United.". 5
LIQUID MOLECULAR WEIGHT 23.27 23.07 18.05 18.02
This space is reserved for the Arabic translation of the above paragraph.
LIQUID DEN @ PRESS &TEMP (kg/m³) 1,226 1,218 967 981
LIQUID VISCOSITY (cP) 0.620 0.584 0.331 0.466
COMPOSITION (WT.%)
ETHYLENE 0.00 0.00 0.01 0.01 0.00 11.21 0.01
OXYGEN 0.38
ETHYLENE OXIDE
CARBON DIOXIDE 0.00 59.22 76.24 0.00 37.14 90.87
JUBAIL UNITED
WATER 72.42 73.40 40.71 23.74 99.76 42.75 9.12 99.94 PETROCHEMICAL COMPANY
NITROGEN 0.01
ARGON 1.19
JUPC EG-III
METHANE 7.27
ETHANE 0.05 PROCESS FLOWSHEET
MEG 3.58 3.61 0.06 0.01 0.24 0.00 0.06
DEG
ETHYLENE GLYCOL PLANT
6 TEG CO2 REMOVAL SYSTEM 6
PEG
FORMALDEHYDE
ACETALDEHYDE SCALE: None CHECKED: EG/RG
K2CO3 7.24 10.13 DATE: 03/11/16 APPROVED: SK
KHCO3 16.77 12.85 DRAWN: CAD APPROVED:
TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 FILENAME: 53133-62-SD-1021
SHT.: REV.
DWG. 62-SD-1021 2
A B C D E F G H J K
 A B C D E F G H J K

V-6315 E-6314 P-6310A/B C-6310 E-6311 E-6310 P-6311A/B V-6311

PK-6335 PK-6336 E-6313A-F E-6312 PK-6314 P-6312A/B
CYCLE WATER FLASH DRUM
K-6315 GENERAL:
CYCLE WATER CYCLE WATER CYCLE WATER STRIPPING COLUMN CYCLE WATER FLASH STRIPPING COLUMN/ STRIPPING COLUMN STRIPPING COLUMN STRIPPING COLUMN ACID SCRUBBER
CAUSTIC CYCLE WATER ANTIFOAM CYCLE WATER CYCLE WATER
CHILLER PUMPS COMPRESSOR KO DRUM CHILLER EXCHANGER BOTTOMS PUMPS DRUM COMPRESSOR FLASH DRUM CONDENSER REBOILER REFLUX PUMPS 1. SD DRAWINGS 00-SD-0001 AND 00-SD-0002 FOR STANDARD SYMBOLS
INJECTION SYSTEM INJECTION SYSTEM COOLER EXCHANGER 21.7 m³
2268 m³/h 29.01MW 2473 m³/h 54,173 Std. m³/h 32.41 MW (DES) 47.31 MW (DES) 58.4 m³/h
0.2 m³/h 0.0012 m³/h 78.94 MW (DES) 111.97 MW AND NOMENCLATURE.
12.64 MW (NOR) 1.014 MW (NOR)
45.49 MW (NOR)
NOTES:
FC
1 RECYCLE WATER 1. ANTIFOAM AND CAUSTIC INJECTION ARE NOT INCLUDED IN THE 1
NNF MATERIAL BALANCE.
65-SD-1051 60
FROM P-6540A/B REABSORBER FEED

PRECONDENSATE 308 63-SD-1032

E-6311
205 TO C-6320
62-SD-1021
FROM P-6222A/B
CYCLE WATER
66-SD-1062 304
TO E-6621 301
CYCLE WATER BLEED
94 0.49
65-SD-1051 305 FC
TO E-6552 303
0.59 60 9000 kg/h WI
V-6311
57 97
E-6312
RICH CYCLE WATER
2 61-SD-1012 110
307 LC 2
FROM E-6115

TC

SL

64 37 LOCATED AT OSBL PRESSURE (barg)

5697 m³/h WC FT

PACKAGE UNIT FC EXTRACTION STEAM TEMPERATURE - oC

39
PK-6314 546 65-SD-1055
FROM C-6537

51 FT PROCESS STEAM
43 27
CHILLED WATER 0.66 618 66-SD-1062
WR FROM E-6621

E-6313A-F E-6314 CARRYOVER

61-SD-1012
LC FROM C-6115 KO DRUM
3 33 157 C-6310 FC 3
SL 80,880 kg/h (DES)
33 2000 kg/h (NOR)
LEAN CYCLE WATER
61-SD-1012 306
TO C-6115
E-6310

SCL

0.18 REFERENCE DRAWING TITLE

0.69
ANTIFOAM

PC 115
302 kg/h (DES) LC
0 kg/h (NOR)
KC FC
K-6315 V-6315
105 SC
4 REV DATE PROCESS CTRL SYS PIP EICS PROJ 4
302 60

Scientific Design Co., Inc.

PK-6335 PK-6336 P-6312A/B P-6310A/B
Little Ferry, New Jersey
CARRY OVER P-6311A/B BLOWDOWN SD Project No. 53133
NNF
69-SD-1094 66-SD-1062
TO GLYCOL PUMP FROM P-6625A/B
STREAM NUMBER 301 302 303 304 305 306 307 308
STREAM DESCRIPTION STRIPPING STRIPPING STRIPPING MEG COL. CYCLE WATER LEAN CYLE STRIPPING REABSORBER
COLUMN COLUMN COLUMN CONDENSER BLEED WATER COLUMN FEED
OVERHEADS BOTTOMS BOTTOMS TO FEED REFLUX
E- 6312 1 09/07/16 REVISED PER EPDP
REV DATE REVISIONS APPR.
MOLE FRACTION LIQUID 0.0 1.0 1.0 1.0 1.0 1.0 1.0 0.0
TEMPERATURE (°C) 94 105 105 105 105 33 60 60 This drawing and all information thereon is the property of "United" and shall not be
PRESSURE (barg) 0.6 0.2 10.0 10.0 9.0 18.0 6.0 0.5
reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
other than that for which it is specifically furnished without the priorwritten consent
PHASE VAPOR LIQUID LIQUID LIQUID LIQUID LIQUID LIQUID VAPOR
of "United". The drawing and any copies thereof (partial or complete) shall be returned
VAPOR MASS FLOW RATE (kg/h) 109,243.9 78,122.7 to "United.".
5 VAPOR FLOW @ PRES & TEMP (m³/h) 66,205.5 35,030.0
5
VAPOR MOLECULAR WEIGHT 30.90 40.24 This space is reserved for the Arabic translation of the above paragraph.
VAPOR DEN @ PRESS &TEMP (kg/m³) 1.650 2.230
VAPOR VISCOSITY (cP) 0.012 0.011
LIQUID MASS FLOW RATE (kg/h) 1,964,407.4 1,870,824.7 64,745.5 28,857.0 1,870,763.5 40,120.8
LIQUID FLOW @ PRES & TEMP (m³/h) 2,053.9 1,956.4 67.7 30.2 1,881.1 41.7
LIQUID MOLECULAR WEIGHT 18.32 18.32 18.32 18.32 18.32 19.17
LIQUID DEN @ PRESS &TEMP (kg/m³) 956 956 956 956 995 962
LIQUID VISCOSITY
COMPOSITION
(cP)
(WT.%)
0.272 0.271 0.271 0.271 0.781 0.446
JUBAIL UNITED
ETHYLENE
OXYGEN
0.75
0.06
0.00
0.00
1.05
0.08
PETROCHEMICAL COMPANY
ETHYLENE OXIDE 69.45 0.00 0.00 0.00 0.00 0.00 10.11 91.93 JUPC EG-III
CARBON DIOXIDE 0.45 0.00 0.00 0.00 0.00 0.00 0.00 0.63
WATER 28.78 97.67 97.67 97.67 97.67 97.67 89.84 5.62
NITROGEN 0.00 0.00 PROCESS FLOW DIAGRAM
ARGON 0.17 0.24
METHANE 0.28 0.39 ETHYLENE GLYCOL PLANT
ETHANE 0.01 0.01
6 MEG 0.01 2.31 2.31 2.31 2.31 2.31 0.04 0.00 EO STRIPPING 6
DEG 0.00 0.00 0.00 0.00 0.00
TEG 0.00 0.00 0.00 0.00 0.00
PEG 0.00 0.00 0.00 0.00 0.00
SCALE: None CHECKED: EG/RG
FORMALDEHYDE 0.00 0.02 0.02 0.02 0.02 0.02 0.01 0.00
ACETALDEHYDE 0.03 0.00 0.00 0.00 0.00 0.00 0.01 0.04 DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
FILENAME: 53133-63-SD-1031
TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00
SHT.: REV.
DWG. 63-SD-1031 1
A B C D E F G H J K
 A B C D E F G H J K

V-6320 K-6320 E-6323 C-6320 P-6320A/B E-6322 E-6321 E-6324

RECLAIM COMPRESSOR RECLAIM RECLAIM COMPRESSOR REABSORBER REABSORBER REABSORBER REABSORBER REABSORBER
GENERAL:
KO DRUM COMPRESSOR AFTERCOOLER BOTTOMS PUMPS BOTTOMS COOLER WATER COOLER B OTTOM HEATER 1. SD DRAWINGS 00-SD-0001 AND 00-SD-0002 FOR STANDARD SYMBOLS
7.1 m³ 8480 Std. m³/h 1.84 MW (DES) 3083 m³/h 11.50 MW 20.3 MW (DES) 4.93 MW AND NOMENCLATURE.
0.66 MW (NOR) 1.84 MW (NOR)

1 105
1
CARBONATE FLASH GAS
206 62-SD-1021
FROM C-6220
20.19
127 MAX. RECLAIM GAS
60 316 61-SD-1012
NNF TO C-6115
ACID SCRUBBER OVHDS ATM.
63-SD-1031 308
56 25/1
FROM V-2311
50 17/1
GFS OVERHEADS
501 65-SD-1052
43 FROM C-6510
310
PC FC
43 WR
0.39
2 WR
309
MAX 2
E-6321 51
E-6323
44
39 43 25/1
39 46 17/1
RECYCLE WATER PRESSURE (barg)
WC 1585.3 m³/h WC 544 65-SD-1051
FROM P-6540A/B
45 TEMPERATURE - oC
317 m³/h 44

WR

314 43 E-6322

0.02
3 V-6320 3
1943 m³/h
39
C-6320
WC 73 25/1
LC 45 TC
63 17/1
PC LC EVAP. CONDENSATE
MAX 574 65-SD-1052
20.19
45 FROM E-6520
127 0.44
45
WASTE WATER E-6324 REFERENCE DRAWING TITLE
69-SD-1093 315 FC
53 25/1
TO WASTE WATER SUMP 48
312 48 17/1 REABSORBER BTMS
48
313 65-SD-1052
K-6320 311 TO C-6510
25/1 67
17/1 63 TC
EVAP. CONDENSATE
P-6320A/B
65-SD-1051 543 4
4 REV DATE PROCESS CTRL SYS PIP EICS PROJ
STREAM NUMBER 309 310 311 312 313 314 315 316 TO E-6540
STREAM DESCRIPTION REABSORBER REABSORBER REABSORBER REABSORBER REABSORBER RECLAIM RECLAIM RECLAIM GAS
WATER OVERHEAD GROSS RECIR- NET COMPRESSO COMP'R TO CO2 Scientific Design Co., Inc.
BOTTOMS CULATION BOTTOMS R FEED GAS KO DRUM REMOVAL
Little Ferry, New Jersey
COND
SD Project No. 53133
MOLE FRACTION LIQUID 1.0 0.0 1.0 1.0 1.0 0.0 1.0 0.0
TEMPERATURE (°C) 43 43 48 48 48 45 45 127
PRESSURE (barg) 6.0 0.4 0.5 5.1 5.1 0.1 0.1 20.2
PHASE LIQUID VAPOR LIQUID LIQUID LIQUID VAPOR LIQUID VAPOR
VAPOR MASS FLOW RATE (kg/h) 1,964.5 3,690.5 3,559.3
VAPOR FLOW @ PRES & TEMP (m³/h) 1,328.3 2,964.1 179.9
1 09/07/16 REVISED PER EPDP MEETING
VAPOR MOLECULAR WEIGHT 27.6 29.4 30.1 REV DATE REVISIONS APPR.
VAPOR DEN @ PRESS &TEMP (kg/m³) 1.5 1.245 19.784 This drawing and all information thereon is the property of "United" and shall not be
VAPOR VISCOSITY (cP) 0.013 0.013 0.018 reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
LIQUID MASS FLOW RATE (kg/h) 494,592.2 2,697,241.0 2,124,007.8 573,233.5 1,281.5 other than that for which it is specifically furnished without the priorwritten consent
of "United". The drawing and any copies thereof (partial or complete) shall be returned
LIQUID FLOW @ PRES & TEMP (m³/h) 499.8 2,791.8 2,198.6 593.3 1.3 to "United.".
5 5
LIQUID MOLECULAR WEIGHT 18.19 19.68 19.68 19.68 18.02
LIQUID DEN @ PRESS &TEMP (kg/m³) 990 966 966 966 989 This space is reserved for the Arabic translation of the above paragraph.
LIQUID VISCOSITY (cP) 0.632 0.549 0.548 0.549 0.657
COMPOSITION (WT.%)
ETHYLENE 0.00 41.62 0.00 0.00 0.00 30.92 0.00 32.06
OXYGEN 0.00 3.33 0.00 0.00 0.00 2.07 0.00 2.14
ETHYLENE OXIDE 0.00 0.00 12.94 12.94 12.94 0.00 0.00 0.00
CARBON DIOXIDE 0.00 25.07 0.00 0.00 0.00 42.28 0.04 43.83 JUBAIL UNITED
WATER 98.67 4.01 85.90 85.90 85.90 4.29 99.95 0.77 PETROCHEMICAL COMPANY
NITROGEN 0.00 0.09 0.00 0.00 0.00 0.06 0.00 0.06
ARGON 0.00 9.71 0.00 0.00 0.00 6.10 0.00 6.33 JUPC EG-III
METHANE 0.00 15.58 0.00 0.00 0.00 13.94 0.00 14.45
ETHANE 0.00 0.58 0.00 0.00 0.00 0.35 0.00 0.36 PROCESS FLOW DIAGRAM
MEG 1.33 0.00 1.15 1.15 1.15 0.00 0.00 0.00
DEG 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 ETHYLENE GLYCOL PLANT
6 TEG 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 EO REABSORPTION 6
PEG 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
FORMALDEHYDE 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
ACETALDEHYDE 0.00 0.00 0.01 0.01 0.01 0.00 0.00 0.00 SCALE: None CHECKED: EG/RG
DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 FILENAME: 53133-63-SD-1032
SHT.: REV.
DWG. 63-SD-1032 1
A B C D E F G H J K
 A B C D E F G H J K

E-6552 E-6553A/B PK-6550 TK-6550 P-6550A/B P-6540A/B TK-6540 E-6540A/B

CYCLE WATER CYCLE WATER CYCLE WATER TREATING UNIT RECYCLE WATER COOLER
GENERAL:
TREATED WATER TANK TREATED WATER PUMPS RECYCLE WATER PUMPS RECYCLE WATER TANK
BLEED EXCHANGER BLEED COOLER CYCLE TIME = 48 h 581 m³ 63 m³/h 1079 m³/h 1697.5 m³ 20.3 MW (DES) 1. SD DRAWINGS 00-SD-0001 AND 00-SD-0002 FOR STANDARD SYMBOLS
3.65 MW 3.56 MW 9.42 MW (NOR) AND NOMENCLATURE.

1 1
WC 219.7 m³/h

RECYCLE WATER 46 70 25/1 93 25/1

E-6553A/B 46 17/1 E-6552 93 17/1
63-SD-1032 544 39 TREATED WATER
TO E-6321 65-SD-1053
530
RECYCLE WATER 39 105 TO C-6531/6532/6533
NNF
63-SD-1031 CYCLE WATER BLEED
TO C-6310 305 63-SD-1031
FROM P-6310A/B

44 121
BLOWDOWN
WR 619 66-SD-1062
FROM P-6625A/B
43
2 PK-6550 2
20% NaOH 18,322 kg/CYCLE LEVEL CONTROL
CAUSTIC TO ANION
KC
DILUTION BED 65-SD-1056
MEG RECYCLE NNF FROM V-6538 LC VALVE
30% HCl 8310 kg/CYCLE ACID
66-SD-1064 HCL TO CATION EVAP. CONDENSATE
DILUTION BED
FROM P-6623A/B 536 65-SD-1052 PRESSURE (barg)
NaHSO3 22,080 kg/CYCLE CHEMICAL TO FRR FROM E-6520
KP FC
MAKE-UP BED 60
WC 1585.3 m³/h TEMPERATURE - oC
WP
14,454 kg/h
NL
39 67 25/1
PC 63 17/1
E-6540A/B EVAP. CONDENSATE

CATION

ANION

ANION
ARR
NL 543 63-SD-1032
FROM E-6324
43 51
PC
WR
3 WP
29,391 kg/h 3
LC

60 HOTWELL CONDENSATE
WASTE WATER LC
560 551 65-SD-1056
69-SD-1093 538 TK-6540
TK-6550 P-6538A/B
TO NEUTRALIZATION SUMP 512

554
(DISPL. WATER) P-6540A/B
P-6550A/B
REFERENCE DRAWING TITLE

STREAM NUMBER 512 530 536 538 543 544 551 554 560
STREAM DESCRIPTION TREATED TREATED EVAP. TREATING EVAP. RECYCLE EVAP. DISPLACE- TREATED
CYCLE WATER WATER CONDENSATE UNIT WASTE CONDENSATE WATER HOTWELL TO MENT WATER WATER TO
TO TREATED WATER TO RECYCLE RECYCLE
RECYCLE
WATER TANK WATER TANK WATER TANK
WATER TANK 4
4 REV DATE PROCESS CTRL SYS PIP EICS PROJ

MOLE FRACTION LIQUID 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0
TEMPERATURE (°C) 43 94 60 63 46 45 35 43 Scientific Design Co., Inc.
PRESSURE (barg) 6.1 19.6 3.9 1.0 6.5 5.4 2.0 20.6 Little Ferry, New Jersey
PHASE LIQUID LIQUID LIQUID LIQUID LIQUID LIQUID LIQUID LIQUID SD Project No. 53133
VAPOR MASS FLOW RATE (kg/h)
VAPOR FLOW @ PRES & TEMP (m³/h)
VAPOR MOLECULAR WEIGHT
VAPOR DEN @ PRESS &TEMP (kg/m³) 3 09/07/16 REVISED PER EPDP
VAPOR VISCOSITY (cP) 2 04/21/16 PER P&ID REVIEW
LIQUID MASS FLOW RATE (kg/h) 42,222.1 48,982.1 NNF 23,650.5 409,755.2 494,593.0 38,333.9 6,760.0 31,982.1 1 04/05/16 PER CLIENT COMMENTS
REV DATE REVISIONS APPR.
LIQUID FLOW @ PRES & TEMP (m³/h) 42.5 50.7 24.1 417.9 500.5 38.8 6.8 33.1 This drawing and all information thereon is the property of "United" and shall not be
LIQUID MOLECULAR WEIGHT 18.64 18.55 18.10 18.18 18.19 18.02 18.02 18.55 reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
other than that for which it is specifically furnished without the priorwritten consent
LIQUID DEN @ PRESS &TEMP (kg/m³) 993 965 982 980 988 987 991 965 of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 LIQUID VISCOSITY (cP) 0.659 0.311 0.463 0.453 0.595 0.598 0.728 0.311 to "United.". 5
COMPOSITION (WT.%) This space is reserved for the Arabic translation of the above paragraph.
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 98.50 95.91 99.86 98.72 98.67 99.98 100.00 95.91
NITROGEN
JUBAIL UNITED
ARGON PETROCHEMICAL COMPANY
METHANE JUPC EG-III
ETHANE
MEG 1.50 4.09 0.14 1.28 1.33 0.02 0.00 4.09 PROCESS FLOW DIAGRAM
DEG
TEG
ETHYLENE GLYCOL PLANT
6 PEG RECYCLE WATER SYSTEM 6
FORMALDEHYDE 0.00 0.00 AND CYCLE WATER TREATING UNIT
ACETALDEHYDE
SCALE: None CHECKED: EG/RG
DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 FILENAME: 53133-65-SD-1051
SHT.: REV.
DWG. 65-SD-1051 3
A B C D E F G H J K
 A B C D E F G H J K

C-6510 P-6510A/B C-6570 E-6520 E-6521 E-6522 E-6523 E-6524 R-6520 E-6560
GLYCOL FEED STRIPPER REACTOR FEED PUMPS WASTE WATER VOC STRIPPER REACTOR FEED PREHEATER FIRST STAGE SECOND STAGE THIRD STAGE FOURTH STAGE GLYCOL REACTOR ALDEHYDE STRIPPER GENERAL:
870 m³/h 33.95 MW REACTOR FEED HEATER REACTOR FEED HEATER REACTOR FEED HEATER REACTOR FEED HEATER WASTE WATER COOLER
22.03 MW 15.23 MW 7.16 MW 20.95 MW (DES) 1.31 MW 1. SD DRAWINGS 00-SD-0001 AND 00-SD-0002 FOR STANDARD SYMBOLS
5.85 MW (NOR) AND NOMENCLATURE.

133 ALDEHYDE VENT

1 553 OSBL 1
TO INCINERATOR
FC
36,250 kg/h (DES)
SI
9850 kg/h (NOR)
56 25/1
FC
50 17/1 E-6524 160
GFS OVERHEADS SUSPECT CONDENSATE
PC
63-SD-1032 501 2.0 69-SD-1091
TO C-6320 TO V-6920
195
GLYCOL REACTOR OUTLET
151 25/1
53 25/1 505 65-SD-1053
0.46 132 17/1
48 17/1 FC TO C-6531
REABSORBER BTMS TC
63-SD-1032 313
FROM E-6324 SL LC
1200 kg/h R-6520
189 25/1 134 25/1
EVAPORATOR CONDENSATE C-6570 190 25/1
2 FC 173 17/1 123 17/1 2
63-SD-1032 574 504 173 17/1 ALDEHYDE OVERHEAD VAPOR
TO E-6324
513 65-SD-1053
EVAPORATOR CONDENSATE FROM C-6560
E-6523 127 25/1 159 25/1
65-SD-1051 536 134 FC
TO TK-6550 112 17/1 157 17/1
EXTRACTION STEAM
561 65-SD-1054 PRESSURE (barg)
>
FROM C-6535
FC 159 25/1
E-6522 157 17/1 TEMPERATURE - oC
METHANE CONDENSATE
OSBL 0.51 65-SD-1056
123 25/1 TO V-6538
FT FC 126 17/1
STEAM EXTRACTION STEAM
410 kg/h
69-SD-1091 552 65-SD-1055
FROM V-6920 112 25/1 FROM C-6537
FT FC 112 17/1
119
SL CONDENSATE
E-6521 65-SD-1056
3 3
FC 113 25/1 TO V-6538
EXTRACTION STEAM
101 17/1
65-SD-1055 503 CONDENSATE
FROM C-6537 C-6510 528 65-SD-1056
126 FROM P-6535A/B
SETPOINT 25/1 99
65-SD-1053
17/1 85 51 45
TO C-6531 STEAM FC 73 25/1 WASTE WATER
LC 63 17/1 WR 539 69-SD-1093
TO WASTE WATER SUMP
39 REFERENCE DRAWING TITLE
WC 94 m³/h

E-6560
HC E-6520
FC
FC
65 25/1
55 17/1
4 REV DATE PROCESS CTRL SYS PIP EICS PROJ 4
502 LEVEL CONTROL
65-SD-1053
Scientific Design Co., Inc.
P-6510A/B Little Ferry, New Jersey
FROM C-6531 LC
65-SD-1053
SD Project No. 53133

STREAM NUMBER 501 502 503 504 505 513 528 539 552 553 574
TO R-6520 PRESSURE CONTROL VALVE
STREAM DESCRIPTION GLYCOL FEED GLYCOL FEED EXTRACTION GLYCOL GLYCOL ALDEHYDE EVAPORATOR ALDEHYDE EXTRACTION WASTE EVAPORATOR
STRIPPER STRIPPER STEAM TO REACTOR REACTOR STRIPPER CONDENSATE PURGE STEAM TO WATER VOC COND. TO
OVERHEADS BOTTOMS GLYCOL FEED FEED OUTLET OVERHEAD E- 6521 STRIPPER REABSORBER
STRIPPER OVERHEAD BTMS HEATER

MOLE FRACTION LIQUID 0.0 1.0 0.0 1.0 1.0 0.0 1.0 1.0 0.0 0.0 1.0
1 09/07/16 REVISED PER EPDP MEETING
TEMPERATURE (°C) 50 55 126 132 195 173 101 45 126 133 63
REV DATE REVISIONS APPR.
PRESSURE (barg) 0.5 0.5 1.2 22.0 22.0 7.7 4.4 2.1 1.2 2.0 0.1
PHASE VAPOR LIQUID VAPOR LIQUID LIQUID VAPOR LIQUID LIQUID VAPOR VAPOR LIQUID This drawing and all information thereon is the property of "United" and shall not be
reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
VAPOR MASS FLOW RATE (kg/h) 2,482.6 6,609.2 12,710.9 28,803.5 2,243.0
other than that for which it is specifically furnished without the priorwritten consent
VAPOR FLOW @ PRES & TEMP (m³/h) 1,055.1 5,482.9 2,889.2 23,895.1 1,381.9 of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 VAPOR MOLECULAR WEIGHT 41.95 18.16 18.05 18.16 18.15 to "United.". 5
VAPOR DEN @ PRESS &TEMP (kg/m³) 2.353 1.205 4.399 1.205 1.623
VAPOR VISCOSITY (cP) 0.010 0.013 0.015 0.013 0.013 This space is reserved for the Arabic translation of the above paragraph.
LIQUID MASS FLOW RATE (kg/h) 577,767.3 577,767.0 577,767.0 409,761.6 11,667.9 409,755.2
LIQUID FLOW @ PRES & TEMP (m³/h) 600.3 647.1 649.2 427.6 11.8 418.0
LIQUID MOLECULAR WEIGHT 19.62 19.62 20.77 18.18 18.02 18.18
LIQUID DEN @ PRESS &TEMP (kg/m³) 963 893 890 958 987 980
LIQUID VISCOSITY (cP) 0.489 0.205 0.155 0.280 0.600 0.453
COMPOSITION (WT.%)
ETHYLENE 0.16 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 JUBAIL UNITED
OXYGEN
ETHYLENE OXIDE
0.00
95.63
0.00
12.43
0.00
0.00
0.00
12.43
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
PETROCHEMICAL COMPANY
CARBON DIOXIDE
WATER
0.76
3.39
0.00
86.42
0.00
98.87
0.00
86.42
0.00
81.73
0.00
99.73
0.00
98.72
0.00
99.96
0.00
98.87
0.00
98.70
0.00
98.72
JUPC EG-III
NITROGEN 0.00 0.00
ARGON
METHANE
0.01
0.02
PROCESS FLOW DIAGRAM
ETHANE 0.00 ETHYLENE GLYCOL PLANT
MEG 0.00 1.15 1.13 1.15 15.98 0.04 1.28 0.04 1.13 0.00 1.28
6 DEG 2.13 GLYCOL REACTION 6
TEG 0.14
PEG 0.02
FORMALDEHYDE SCALE: None CHECKED: EG/RG
ACETALDEHYDE 0.03 0.23 0.00 0.00 0.00 1.29 0.00
DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 FILENAME: 53133-65-SD-1052
SHT.: REV.
DWG. 65-SD-1052 1
A B C D E F G H J K
 A B C D E F G H J K

V-6531 E-6531 C-6531 V-6532 E-6532 C-6532 V-6533 C-6560 E-6533 C-6533
ALDEHYDE
GENERAL:
FIRST EFFECT FIRST EFFECT FIRST EFFECT SECOND EFFECT SECOND EFFECT SECOND EFFECT THIRD EFFECT THIRD EFFECT THIRD EFFECT
REBOILER COND. DRUM REBOILER COND. EVAPORATOR REBOILER COND. DRUM REBOILER EVAPORATOR REBOILER COND. DRUM STRIPPER REBOILER EVAPORATOR 1. SD DRAWINGS 00-SD-0001 AND 00-SD-0002 FOR STANDARD SYMBOLS
8.4 m³ 53.8 MW 6.8 m³ 42.6 MW 13.5 m³ 48.8 MW AND NOMENCLATURE.

93 25/1
1 TREATED WATER
93 17/1 1
TREATED WATER
65-SD-1051 530 65-SD-1054
FROM E-6552 TO C-6534/C-6535
531 532 ALDEHYDE STRIPPER OVHDS
513 65-SD-1052
201 25/1 FC 191 25/1 TO E-6523
FC 25/1 14.6 186 17/1 11.6 25/1 179 17/1 533 NON CONDENSIBLE VENT
515 OSBL
17/1 10.2 506 511 181
8.4 17/1 25/1
FC 172 17/1
THIRD EFFECT OVHDS
MEG RECYCLE 25/1 9 518 65-SD-1054
66-SD-1064 622 TO E-6534
P-6623A/B 17/1 6.9

CONTROL SIGNAL
65-SD-1052 <
FROM R-6520 FEED FC
2 2
195 PC
GLYCOL RX OUTLET
65-SD-1052 505 25/1 190
FROM R-6520 17/1 173
PRESSURE (barg)

TEMPERATURE - oC
TO R-6520 FEED CONTROL
65-SD-1052 LC C-6531 LC C-6532 LC
C-6533
C-6560

FROM C-6510 LEVEL CONTROL 11.6 25/1

65-SD-1052 FC 193 25/1
181 17/1 183 25/1
7.6 17/1
SM 174 17/1
E-6531 517 11.6 25/1 THIRD EFFECT BOTTOMS
102,620 kg/h (DES)
3 25/1
25/1 17/1
516 521 65-SD-1054
3
19.64 202 14.6 10.2 TO E-6534
200 7.6 17/1
E-6532 25/1 190 25/1 E-6533
188 FC
185 17/1 178 17/1
17/1
V-6533 LC
LC V-6531 V-6532
LC SM

190 25/1 10,000 kg/h

510
SCM 200 25/1 173 17/1 CONDENSATE
214 185 17/1 514 65-SD-1054 REFERENCE DRAWING TITLE

509 TO V-6534

STREAM NUMBER 505 506 509 510 511 513 514 515 516 517 518 521 530 531 532 533
STREAM DESCRIPTION GLYCOL 1ST EFFECT 2ND EFFECT 1ST EFFECT 2ND EFFECT ALDEHYDE ALDEHYDE 3RD EFFECT 2ND EFFECT 2ND EFFECT 3RD EFFECT 3RD EFFECT TREATED FIRST EFFECT 2ND EFFECT 3RD EFFECT
4 REACTOR OVERHEAD CONDENSATE BOTTOMS OVERHEAD STRIPPER STRIPPER REB. NON- REB. BOTTOMS OVERHEADS BOTTOMS WATER REFLUX REFLUX REFLUX
REV DATE PROCESS CTRL SYS PIP EICS PROJ 4
OUTLET OVERHEAD BOTTOMS CONDENSIBLE ALDEHYDE
VENT PURGE
Scientific Design Co., Inc.
MOLE FRACTION LIQUID 1.0 0.0 1.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 1.0 1.0 1.0 1.0 1.0 Little Ferry, New Jersey
TEMPERATURE (°C) 195 186 185 188 179 173 173 178 185 181 172 174 94 94 94 94 SD Project No. 53133
PRESSURE (barg) 22.0 10.4 10.4 10.4 8.6 7.7 7.7 8.6 10.4 8.7 7.1 7.1 19.6 19.6 19.6 19.6
PHASE LIQUID VAPOR LIQUID LIQUID VAPOR VAPOR LIQUID VAPOR VAPOR LIQUID VAPOR LIQUID LIQUID LIQUID LIQUID LIQUID
VAPOR MASS FLOW RATE (kg/h) 48,407.9 54,600.1 12,710.9 500.0 1,000.0 60,176.1
VAPOR FLOW @ PRES & TEMP (m³/h) 8,533.9 11,303.1 2,889.2 103.6 175.7 14,682.3
VAPOR MOLECULAR WEIGHT 18.12 18.12 18.05 18.03 18.11 18.14
VAPOR DEN @ PRESS &TEMP (kg/m³) 5.672 4.831 4.399 4.825 5.691 4.099
VAPOR VISCOSITY (cP) 0.016 0.015 0.015 0.015 0.016 0.015 REV DATE REVISIONS APPR.

LIQUID MASS FLOW RATE (kg/h) 577,767.0 47,407.9 541,830.7 99,799.8 489,230.6 431,054.5 48,982.1 2,000.0 2,000.0 2,000.0 This drawing and all information thereon is the property of "United" and shall not be
reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
LIQUID FLOW @ PRES & TEMP (m³/h) 649.2 53.6 601.7 111.2 537.5 468.6 50.7 2.1 2.1 2.1 other than that for which it is specifically furnished without the priorwritten consent
LIQUID MOLECULAR WEIGHT 20.77 18.12 21.32 18.12 21.73 22.33 18.55 18.55 18.55 18.55 of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 to "United.". 5
LIQUID DEN @ PRESS &TEMP (kg/m³) 890 885 901 897 910 920 965 965 965 965
LIQUID VISCOSITY (cP) 0.155 0.143 0.165 0.154 0.176 0.189 0.311 0.311 0.311 0.311 This space is reserved for the Arabic translation of the above paragraph.
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 81.73 99.21 99.21 78.64 99.22 99.73 99.22 99.91 99.16 76.41 99.04 73.35 95.91 95.91 95.91 95.91
JUBAIL UNITED
NITROGEN PETROCHEMICAL COMPANY
ARGON
METHANE
JUPC EG-III
ETHANE
MEG 15.98 0.73 0.75 18.76 0.78 0.04 0.78 0.04 0.05 20.70 0.96 23.38 4.09 4.09 4.09 4.09 PROCESS FLOW DIAGRAM
DEG 2.13 2.44 2.70 0.00 3.07 ETHYLENE GLYCOL PLANT
TEG 0.14 0.15 0.16 0.00 0.19
6 1ST - 3RD EFFECT EVAPORATORS 6
PEG 0.02 0.02 0.02 0.00 0.02
FORMALDEHYDE
ACETALDEHYDE 0.06 0.04 0.23 0.05 0.79 0.00
SCALE: None CHECKED: EG/RG
DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 FILENAME: 53133-65-SD-1053
SHT.: REV.
DWG. 65-SD-1053 0
A B C D E F G H J K
 A B C D E F G H J K

V-6534 E-6534 C-6534 V-6535 E-6535 C-6535

FOURTH EFFECT FOURTH EFFECT FOURTH EFECT FIFTH EFFECT FIFTH EFFECT FIFTH EFFECT GENERAL:
REBOILER COND. DRUM REBOILER EVAPORATOR REBOILER COND. DRUM REBOILER EVAPORATOR
19.4 m³ 55.7 MW 25.8 m³ 62.7 MW 1. SD DRAWINGS 00-SD-0001 AND 00-SD-0002 FOR STANDARD SYMBOLS
AND NOMENCLATURE.

NONCONDENSIBLE VENT
1 519 OSBL 1
NONCONDENSIBLE VENT
523 OSBL

TREATED REFLUX
65-SD-1055
159 25/1 TO C-6536/6537
171 25/1 535 157 17/1 FIFTH EFFECT OVHDS
165 17/1 65-SD-1055
537
FC TO E-6536
522
25/1 6.8 526
4.8 25/1 EXTRACTION STEAM
561 65-SD-1052
FC 17/1 5.6
TO E-6522
2 4.3 17/1 2
TREATED WATER
65-SD-1053 534
FROM E-6552

PRESSURE (barg)

TEMPERATURE - oC

THIRD EFFECT OVHDS C-6534

65-SD-1053 518 C-6535
LC LC
FROM C-6533

E-6535
CONDENSATE E-6534
3 25/1
3
65-SD-1053 514 173
FROM C-6533 167 17/1
25/1 9 25/1 6.8
25/1 162
17/1 160 FIFTH EFFECT BTMS
17/1 6.9 17/1 5.6 V-6535 LC
V-6534 LC 529 65-SD-1055
TO E-6536
25/1 180
183 25/1 25/1 169
17/1 170 520 CONDENSATE
174 17/1 17/1 163
THIRD EFFECT BTMS
524 65-SD-1055 REFERENCE DRAWING TITLE
65-SD-1053 521 TO V-6536
FROM C-2533 525

STREAM NUMBER 514 518 519 520 521 522 523 524 525 526 529 534 535 537 561
STREAM DESCRIPTION ALDEHYDE 3RD EFFECT 4TH EFFECT 4TH EFFECT 3RD EFFECT 4TH EFFECT 5TH EFFECT 5TH EFFECT 4TH EFFECT 5TH EFFECT 5TH EFFECT 4TH EFFECT 5TH EFFECT EXTRACTION EXTRACTION
4 STRIPPER OVERHEADS REB. NON- CONDENSATE BOTTOMS OVERHEADS REB. NON- CONDENSATE BOTTOMS OVERHEADS BOTTOMS REFLUX REFLUX STEAM TO STEAM TO
REV DATE PROCESS CTRL SYS PIP EICS PROJ 4
BOTTOMS CONDENSIBLE CONDENSIBLE 6TH EFFECT E- 6522
VENT VENT REBOILER
Scientific Design Co., Inc.
MOLE FRACTION LIQUID 1.0 0.0 0.0 1.0 1.0 0.0 0.0 1.0 1.0 0.0 1.0 1.0 1.0 0.0 0.0 Little Ferry, New Jersey
TEMPERATURE (°C) 173 172 170 170 174 165 163 163 167 157 160 94 94 157 157 SD Project No. 53133
PRESSURE (barg) 7.7 7.1 7.1 7.1 7.1 5.7 5.7 5.7 5.7 4.3 4.4 19.6 19.6 4.3 4.3
PHASE LIQUID VAPOR VAPOR LIQUID LIQUID VAPOR VAPOR LIQUID LIQUID VAPOR LIQUID LIQUID LIQUID VAPOR VAPOR
VAPOR MASS FLOW RATE (kg/h) 60,176.1 500.0 65,457.0 500.0 72,247.0 72,247.0 0.0
VAPOR FLOW @ PRES & TEMP (m³/h) 14,682.3 122.2 19,006.8 145.4 26,002.5 26,002.5 0.0
VAPOR MOLECULAR WEIGHT 18.14 18.02 18.16 18.02 18.20 18.20 18.20
VAPOR DEN @ PRESS &TEMP (kg/m³) 4.099 4.092 3.444 3.439 2.778 2.778 2.778
REV DATE REVISIONS APPR.
VAPOR VISCOSITY (cP) 0.015 0.015 0.015 0.015 0.014 0.014 0.014
This drawing and all information thereon is the property of "United" and shall not be
LIQUID MASS FLOW RATE (kg/h) 99,799.8 159,476.0 431,054.5 224,436.9 367,597.4 297,350.5 2,000.0 2,000.0 reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
LIQUID FLOW @ PRES & TEMP (m³/h) 111.2 177.0 468.6 247.1 395.0 314.9 2.1 2.1 other than that for which it is specifically furnished without the priorwritten consent
LIQUID MOLECULAR WEIGHT 18.12 18.13 22.33 18.14 23.26 24.89 18.55 18.55 of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 to "United.". 5
LIQUID DEN @ PRESS &TEMP (kg/m³) 897 901 920 908 931 944 965 965
LIQUID VISCOSITY (cP) 0.154 0.157 0.189 0.165 0.207 0.236 0.311 0.311 This space is reserved for the Arabic translation of the above paragraph.
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 99.22 99.04 99.95 99.15 73.35 98.89 99.95 99.07 68.92 98.57 61.90 95.91 95.91 98.58 98.58
JUBAIL UNITED
NITROGEN PETROCHEMICAL COMPANY
ARGON JUPC EG-III
METHANE
ETHANE
MEG 0.78 0.96 0.04 0.85 23.38 1.11 0.04 0.93 27.24 1.42 33.36 4.09 4.09 1.42 1.42 PROCESS FLOW DIAGRAM
DEG 3.07 3.59 0.01 4.44 ETHYLENE GLYCOL PLANT
TEG 0.19 0.22 0.00 0.27
6 4TH AND 5TH EFFECT EVAPORATORS 6
PEG 0.02 0.02 0.00 0.03
FORMALDEHYDE
ACETALDEHYDE 0.00 0.00 SCALE: None CHECKED: EG/RG
DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 FILENAME: 53133-65-SD-1054
SHT.: REV.
DWG. 65-SD-1054 0
A B C D E F G H J K
 A B C D E F G H J K

V-6536 E-6536 C-6536 V-6537 E-6537 C-6537

SIXTH EFFECT SIXTH EFFECT SIXTH EFECT SEVENTH EFFECT SEVENTH EFFECT SEVENTH EFFECT GENERAL:
REBOILER COND. DRUM REBOILER EVAPORATOR REBOILER COND. DRUM REBOILER EVAPORATOR
35.5 m³ 58.7 MW 43.6 m³ 55.6 MW
1. SD DRAWINGS 00-SD-0001 AND 00-SD-0002 FOR STANDARD SYMBOLS
AND NOMENCLATURE.

NONCONDENSIBLE VENT
1 571 OSBL 1
NONCONDENSIBLE VENT
572 66-SD-1061
EXTRACTION STEAM
TO E-6611
65-SD-1052 503
TO C-6510 FC
ALTERNATE TREATED WATER
EXTRACTION STEAM NNF
65-SD-1056
63-SD-1031 546 144 123 25/1
25/1 TO C-6538
TO C-6310 569
146 17/1 126 17/1 SEVENTH EFFECT OVHDS
EXTRACTION STEAM
570 65-SD-1056
62-SD-1021 573 576
FC TO E-6538
TO E-6223
25/1 3.0 PC
563 566
1.2 EXTRACTION STEAM
17/1 2.7 552 65-SD-1052
FC TO E-6521
2 TREATED WATER 2
65-SD-1054 568
FROM E-6552

PRESSURE (barg)

TEMPERATURE - oC

FIFTH EFFECT OVHDS C-6536

65-SD-1054 537 C-6537
LC LC
FROM C-6535

E-6537
CONDENSATE E-6536
3 3
65-SD-1054 524 150 25/1
FROM V-6535 150 17/1
25/1 4.8 25/1 3.0
133 25/1
138 17/1
17/1 2.7 SEVENTH EFFECT BTMS
17/1 4.3 V-6537
V-6536 LC LC 567 65-SD-1056
TO E-6538
25/1 158
162 25/1 25/1 144
17/1 154 562 CONDENSATE
160 17/1 17/1 141
FIFTH EFFECT BTMS
565 65-SD-1056 REFERENCE DRAWING TITLE
65-SD-1054 529 TO V-6538
FROM C-6535 564

STREAM NUMBER 503 524 529 537 546 552 562 563 564 565 566 567 568 569 570 571 572 573 576
STREAM DESCRIPTION EXTRACTION 5TH EFFECT 5TH EFFECT EXTRACTION EXTRACTION EXTRACTION 6TH EFFECT 6TH EFFECT 6TH EFFECT 7TH EFFECT 7TH EFFECT 7TH EFFECT 6TH EFFECT 7TH EFFECT EXTRACTION 6TH EFFECT 7TH EFFECT EXTRACTION EXTRACTION
4 STEAM TO CONDENSATE BOTTOMS STEAM TO STEAM TO STEAM TO CONDENSATE OVERHEADS BOTTOMS CONDENSATE OVERHEADS BOTTOMS REFLUX REFLUX STEAM TO REB. NON- REB. NON- STEAM TO STEAM TO REV DATE PROCESS CTRL SYS PIP EICS PROJ 4
GLYCOL FEED 6TH EFFECT STRIPPING E- 6521 8TH EFFECT CONDENSIBLE CONDENSIBLE E- 6223 7TH EFFECT
STRIPPER REBOILER COLUMN REBOILER VENT VENT REBOILER
Scientific Design Co., Inc.
MOLE FRACTION LIQUID 0.0 1.0 1.0 0.0 0.0 0.0 1.0 0.0 1.0 1.0 0.0 1.0 1.0 1.0 0.0 0.0 0.0 0.0 0.0 Little Ferry, New Jersey
TEMPERATURE (°C) 126 163 160 157 126 126 154 147 150 141 126 138 94 94 126 154 141 147 147 SD Project No. 53133
PRESSURE (barg) 1.2 5.7 4.4 4.3 1.2 1.2 4.3 2.8 2.8 2.8 1.2 1.2 19.6 19.6 1.2 4.3 2.8 2.8 2.8
PHASE VAPOR LIQUID LIQUID VAPOR VAPOR VAPOR LIQUID VAPOR LIQUID LIQUID VAPOR LIQUID LIQUID LIQUID VAPOR VAPOR VAPOR VAPOR VAPOR
VAPOR MASS FLOW RATE (kg/h) 6,609.2 72,247.0 21,313.0 28,803.5 80,746.4 61,753.6 5,027.9 500.0 500.0 30,000.0 50,746.4
VAPOR FLOW @ PRES & TEMP (m³/h) 5,482.9 26,002.5 17,681.1 23,895.1 40,100.4 51,227.8 4,170.9 180.2 248.8 14,898.7 25,201.8
VAPOR MOLECULAR WEIGHT 18.16 18.20 18.16 18.16 18.30 18.16 18.16 18.02 18.02 18.30 18.30
VAPOR DEN @ PRESS &TEMP (kg/m³) 1.205 2.778 1.205 1.205 2.014 1.205 1.205 2.774 2.010 2.014 2.014
VAPOR VISCOSITY (cP) 0.013 0.014 0.013 0.013 0.014 0.013 0.013 0.014 0.014 0.014 0.014 REV DATE REVISIONS APPR.
LIQUID MASS FLOW RATE (kg/h) 224,436.9 297,350.5 296,183.8 218,604.1 346,430.2 161,850.5 2,000.0 5,000.0 This drawing and all information thereon is the property of "United" and shall not be
LIQUID FLOW @ PRES & TEMP (m³/h) 247.1 314.9 323.1 226.5 373.0 163.0 2.1 5.2 reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
other than that for which it is specifically furnished without the priorwritten consent
LIQUID MOLECULAR WEIGHT 18.14 24.89 18.15 28.61 18.17 35.89 18.55 18.55 of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 LIQUID DEN @ PRESS &TEMP (kg/m³) 908 944 917 965 929 993 965 965 to "United.". 5
LIQUID VISCOSITY (cP) 0.165 0.236 0.176 0.302 0.194 0.458 0.311 0.311 This space is reserved for the Arabic translation of the above paragraph.
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 98.87 99.07 61.90 98.58 98.87 98.87 98.95 97.82 48.94 98.78 98.87 31.35 95.91 95.91 98.87 99.95 99.95 97.82 97.82
JUBAIL UNITED
NITROGEN PETROCHEMICAL COMPANY
ARGON
METHANE
JUPC EG-III
ETHANE
MEG 1.13 0.93 33.36 1.42 1.13 1.13 1.05 2.18 44.61 1.22 1.13 59.95 4.09 4.09 1.13 0.05 0.04 2.18 2.18 PROCESS FLOW DIAGRAM
DEG 4.44 6.04 0.00 8.16 ETHYLENE GLYCOL PLANT
TEG 0.27 0.37 0.00 0.50
6 6TH AND 7TH EFFECT EVAPORATORS 6
PEG 0.03 0.04 0.00 0.05
FORMALDEHYDE
ACETALDEHYDE 0.00 0.00 SCALE: None CHECKED: EG/RG
DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 FILENAME: 53133-65-SD-1055
SHT.: REV.
DWG. 65-SD-1055 0
A B C D E F G H J K
 A B C D E F G H J K

P-6535A/B V-6538 E-6538A/B C-6538 P-6530A/B E-6539 P-6538A/B SU-6538

GENERAL:
EVAPORATOR EIGHTH EFFECT EIGHTH EFFECT EIGHTH EFFECT CONCENTRATED EIGHTH EFFECT EVAPORATOR EVAPORATOR
CONDENSATE PUMPS REBOILER COND. DRUM REBOILERS EVAPORATOR GLYCOL PUMPS CONDENSER HOTWELL PUMPS HOTWELL 1. SD DRAWINGS 00-SD-0001 AND 00-SD-0002 FOR STANDARD SYMBOLS
66.3 m³
AND NOMENCLATURE.
650 m³/h 55.82 MW 123 m³/h 67.7 MW 148 m³/h 30.2 m³

1 1
NON CONDENSIBLE VENT
527 66-SD-1061
ALTERNATE TREATED WATER
NNF TO E-6611
65-SD-1054
FROM E-6552 59
51
132 kg/h 540
AIR LEAKAGE
WR
SEVENTH EFFECT OVHDS
E-6539 CONDENSER VENT
65-SD-1055 570
140 541 66-SD-1061
FROM C-6537 mm Hg
39 TO EJ-6612
4854 m³/h
FC FC WC
C-6538

549

2 2
CONDENSATE
65-SD-1052
FROM E-6522

CONDENSATE
MEG RECYCLE PRESSURE (barg)
62-SD-1021 NNF
FROM E-6223 66-SD-1065
FROM C-6630
TEMPERATURE - oC

CONDENSATE
65-SD-1052 TC LC
FROM E-6521 E-6538A/B
542
CONDENSATE ATM
65-SD-1055 565 FC
FROM V-6537 0.58 ALTERNATE REFLUX
45 550 66-SD-1061
90
3 3

NNF
LEVEL TO C-6610
65-SD-1051 LC V-6538 FC
TO LEVEL CONTROL VALVE CRUDE GLYCOL
133 25/1 545 66-SD-1061
138 17/1 TO F-6610A/B
SEVENTH EFFECT BOTTOMS
HOTWELL CONDENSATE
65-SD-1055 567
551 65-SD-1051
FROM C-6537 113 25/1
548 TO TK-6540
101 17/1
CONDENSATE LC 45
65-SD-1052 528
SU-6538 REFERENCE DRAWING TITLE
TO E-6520

P-6535A/B P-6530A/B P-6538A/B

STREAM NUMBER 527 528 540 541 542 545 548 549 550 551 567 570
4 STREAM DESCRIPTION 8TH EFFECT EVAPORATOR 8TH EFFECT 8TH EFFECT 8TH EFFECT CRUDE EVAPORATOR 8TH EFFECT EVAP. EVAP. 7TH EFFECT EXTRACTION REV DATE PROCESS CTRL SYS PIP EICS PROJ 4
REB. NON- CONDENSATE OVERHEAD CONDENSER CONDENSER GLYCOL HOTWELL REFLUX HOTWELL TO HOTWELL TO BOTTOMS STEAM TO
CONDENSIBLE VENT CONDENSATE CONDENSATE DRYING COL. RECYCLE 8TH EFFECT
VENT REFLUX WATER TANK REBOILER Scientific Design Co., Inc.
Little Ferry, New Jersey
MOLE FRACTION LIQUID 0.0 1.0 0.0 0.0 1.0 1.0 1.0 1.0 1.0 1.0 0.0
SD Project No. 53133
TEMPERATURE (°C) 101 101 59 45 45 91 45 45 45 138 126
PRESSURE (barg) 0.1 4.4 140 mm Hg 140 mm Hg 0.1 7.4 5.4 5.4 5.4 1.2 1.2
PHASE VAPOR LIQUID VAPOR VAPOR LIQUID LIQUID LIQUID LIQUID LIQUID LIQUID VAPOR
VAPOR MASS FLOW RATE (kg/h) 500.0 45,250.5 129.4 5,027.9
VAPOR FLOW @ PRES & TEMP (m³/h) 812.8 369,866.2 971.2 4,170.9
VAPOR MOLECULAR WEIGHT 18.02 18.03 22.02 18.16
VAPOR DEN @ PRESS &TEMP (kg/m³) 0.615 0.122 0.133 1.205
REV DATE REVISIONS APPR.
VAPOR VISCOSITY (cP) 0.012 0.010 0.014 0.013
This drawing and all information thereon is the property of "United" and shall not be
LIQUID MASS FLOW RATE (kg/h) 409,761.6 45,121.1 123,453.1 45,121.1 6,787.2 38,333.9 161,850.5 reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
LIQUID FLOW @ PRES & TEMP (m³/h) 427.6 45.7 117.3 45.7 6.9 38.8 163.0 other than that for which it is specifically furnished without the priorwritten consent
of "United". The drawing and any copies thereof (partial or complete) shall be returned
LIQUID MOLECULAR WEIGHT 18.18 18.02 51.90 18.02 18.02 18.02 35.89 to "United.".
5 LIQUID DEN @ PRESS &TEMP (kg/m³) 958 987 1,052 987 987 987 993
5
LIQUID VISCOSITY (cP) 0.280 0.600 1.590 0.598 0.598 0.598 0.458 This space is reserved for the Arabic translation of the above paragraph.
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 100.00 98.72 99.85 49.04 100.00 10.00 100.00 100.00 100.00 31.35 98.87
JUBAIL UNITED
NITROGEN 0.15 50.96 PETROCHEMICAL COMPANY
ARGON
JUPC EG-III
METHANE
ETHANE
MEG 1.28 78.59 59.95 1.13 PROCESS FLOW DIAGRAM
DEG 10.69 8.16 ETHYLENE GLYCOL PLANT
TEG 0.65 0.50
6 EIGHTH EFFECT EVAPORATOR 6
PEG 0.07 0.05
FORMALDEHYDE
ACETALDEHYDE 0.00
SCALE: None CHECKED: EG/RG
DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00
FILENAME: 53133-65-SD-1056
SHT.: REV.
DWG. 65-SD-1056 0
A B C D E F G H J K
 A B C D E F G H J K

E-6615 TK-6615A/B P-6615 F-6610A/B C-6610 E-6610 V-6610 P-6610A/B E-6611 EJ-6612 SU-6610 P-6611A/B E-6613 EJ-6612A
GENERAL:
CRUDE GLYCOL TANK CRUDE GLYCOL CRUDE GLYCOL DRYING COLUMN DRYING COLUMN DRYING COLUMN DRYING COLUMN REBOILER DRYING COLUMN DRYING COLUMN DRYING COLUMN DRYING COLUMN DRYING COLUMN CRUDE GLYCOL DRYING COLUMN
FEED COOLER TANKS PUMP FEED FILTERS REBOILER CONDENSATE DRUM BOTTOMS PUMPS CONDENSER VACUUM PUMP SYSTEM HOTWELL REFLUX PUMPS HEATER EJECTOR SYSTEM 1. SD DRAWINGS 00-SD-0001 AND 00-SD-0002 FOR STANDARD SYMBOLS
7.33 MW (DES) 3504 m³ 73 m³/h 30.46 MW (DES) 5.1 m³ 130 m³/h 24.53 MW (DES) 21.5 m³ 47 m³/h 3.55 MW AND NOMENCLATURE.
14.28 MW (NOR) 15.99 MW (NOR)
NOTES:
1 1. THE DRYING COLUMN SYSTEM IS DESIGNED FOR 15 WT% WATER IN 1
THE FEED (NORMAL WATER CONCENTRATION IS 10 WT%).

45 FC
ALTERNATE REFLUX
65-SD-1056 SM
550
FROM P-6538A/B
39
NNF
CONDENSER VENT WC
65-SD-1056 NL
541
FROM E-6539

NONCONDENSIBLE VENT
65-SD-1056 572
FROM E-6537 EJ-6612
NONCONDENSIBLE VENT 51
mm Hg
65-SD-1056 527 FC
WR
FROM E-6538 105 45
2 2
613
59

601
WR
39
51 51 EJ-6612A
MEG PRODUCT PC WC PRESSURE (barg)
140 mm Hg
66-SD-1062 WR
FROM P-6622A/B 603 AIR LEAKAGE BY VENDOR
608 218 kg/h 39 TEMPERATURE - oC
E-6611 MAKE-UP
WC TEG
144
NNF
TC
91 121 1759 m³/h
CRUDE GLYCOL NNF
65-SD-1056 545 C-6610 616
FROM P-6530A/B NNF
NNF 51 DES E-6613
F-6610A/B WASTE WATER
NNF

45 NOR
FC 604 69-SD-1093
56,000 kg/h (DES)
3 WR
17 30,350 kg/h (NOR) TO WASTE WATER SUMP 3
NL 100 mm Hg SI 164
15
E-6615 DRYING COL'N BOTTOMS
225 1
PC 602 66-SD-1062
45 NOR MEG PRODUCT TO F-6620A/B
COOLING WATER 45
85 66-SD-1063 E-6610 ATM 617
66-SD-1063 FC TO E-6622
FROM E-6622
LC
V-6610
SCM 45
LC
GLYCOL TK-6615A/B SU-6610
REFERENCE DRAWING TITLE
NNF
69-SD-1094
FROM P-6971A/B
P-6615 P-6611A/B
P-6610A/B
SET POINT
66-SD-1062
TO C-6620 FEED FC
STREAM NUMBER 601 602 603 604 613 616 617
4 STREAM DESCRIPTION DRYING DRYING DRYING DRYING VAPOR TO DRYING DRYING
REV DATE PROCESS CTRL SYS PIP EICS PROJ 4
COLUMN COLUMN COLUMN COLUMN EJ- 6612 COLUMN COLUMN
OVERHEADS BOTTOMS REFLUX CONDENSATE CONDENSER HOTWELL
TO WASTE CONDENSATE LIQUID
Scientific Design Co., Inc.
Little Ferry, New Jersey
MOLE FRACTION LIQUID 0.0 1.0 1.0 1.0 0.0 1.0 1.0 SD Project No. 53133
TEMPERATURE (°C) 59 164 45 45 45 45 45
PRESSURE (barg) 140 mm Hg 5.0 5.4 4.6 105 mm Hg 0.1 4.6
PHASE VAPOR LIQUID LIQUID LIQUID VAPOR LIQUID LIQUID
VAPOR MASS FLOW RATE (kg/h) 21,143.9 271.6
VAPOR FLOW @ PRES & TEMP (m³/h) 172,552.3 2,484.9
2 04/05/16 PER CLIENT COMMENTS
VAPOR MOLECULAR WEIGHT 18.05 21.04 1 03/28/16 PER CLIENT COMMENTS
VAPOR DEN @ PRESS &TEMP (kg/m³) 0.123 0.109 REV DATE REVISIONS APPR.
VAPOR VISCOSITY (cP) 0.010 0.013 This drawing and all information thereon is the property of "United" and shall not be
LIQUID MASS FLOW RATE (kg/h) 111,108.7 8,690.5 15,386.3 23,872.3 24,076.7 reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
other than that for which it is specifically furnished without the priorwritten consent
LIQUID FLOW @ PRES & TEMP (m³/h) 110.9 8.8 15.6 24.2 24.4 of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 LIQUID MOLECULAR WEIGHT 65.62 18.02 18.02 18.02 18.02 to "United.". 5
LIQUID DEN @ PRESS &TEMP (kg/m³) 1,002 987 987 987 987
This space is reserved for the Arabic translation of the above paragraph.
LIQUID VISCOSITY (cP) 1.003 0.598 0.598 0.600 0.600
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE JUBAIL UNITED
WATER 99.48 0.00 99.99 99.99 59.81 99.99 99.99
NITROGEN 0.52 0.00 0.00 0.00 40.12 0.00 0.00
PETROCHEMICAL COMPANY
ARGON JUPC EG-III
METHANE
ETHANE
MEG 0.00 87.32 0.01 0.01 0.00 0.01 0.01
PROCESS FLOWSHEET
DEG 0.00 11.88 0.00 0.00 0.00 0.00 0.00 ETHYLENE GLYCOL PLANT
6 TEG 0.00 0.72 0.00 0.00 0.00 0.00 0.00 6
PEG 0.00 0.08 0.00 0.00 0.00 0.00 0.00
GLYCOL DRYING
FORMALDEHYDE 0.00 0.00 0.00 0.00 0.00 0.00 0.00
ACETALDEHYDE 0.00 0.00 0.00 0.00 0.06 0.00 0.00 SCALE: None CHECKED: EG/RG
DATE: 03/28/16 APPROVED: SK
DRAWN: CAD APPROVED:
TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 FILENAME: 53133-66-SD-1061
SHT.: REV.
DWG. 66-SD-1061 2
A B C D E F G H J K
 A B C D E F G H J K

P-6625A/B F-6620A/B C-6620 E-6620 E-6621 F-6624A/B V-6621 E-6624 P-6624A/B P-6620A/B P-6621A/B V-6620 P-6622A/B
MEG COLUMN CONDENSER MEG COLUMN MEG COLUMN MEG COLUMN MEG COLUMN MEG COLUMN MEG COLUMN MEG COLUMN MEG COLUMN MEG COLUMN MEG COLUMN REBOILER MEG PRODUCT
GENERAL:
MEG COLUMN
BLOWDOWN PUMPS FEED FILTERS REBOILER CONDENSER REBOILER FILTERS REFLUX DRUM REBOILER PREHEATER REBOILER CIRCULATION BOTTOMS PUMPS REFLUX PUMPS CONDENSATE DRUM PUMPS 1. SD DRAWINGS 00-SD-0001 AND 00-SD-0002 FOR STANDARD SYMBOLS
18.5 m³/h 39.95 MW (DES) 38.68 MW 16.3 m³ 3.99 MW PUMPS 23 m³/h 165 m³/h 6.4 m³ 94.5 m³/h AND NOMENCLATURE.
24.92 MW (NOR) 909 m³/h

1 1
PC TC
135
STEAM 121 MEG CONDENSER VENT
63-SD-1031 618 607 66-SD-1064
TO C-6310 TO E-6623

NL

E-6621

LC 135
105 605
CYCLE WATER
V-6621
63-SD-1031 304
FROM P-6310A/B 143
121 LC

2 PC
2
110 MEG REFLUX FLOW
FC FF 66-SD-1063
192 kg/h mm Hg 135
AIR LEAKAGE TO MEG PROD. FLOW CONTROL

FROM C-6610 LEVEL CONTROL

66-SD-1061 144 PRESSURE (barg)
MEG PRODUCT
608 66-SD-1061
TO E-6613 TEMPERATURE - oC
FC
164 C-6620
DRYING COL'N BOTTOMS
76,250 kg/h (DES)
66-SD-1061 602 55,380 kg/h (NOR)
FROM P-6610A/B SM
TC FC
F-6620A/B
MEG COL BOTTOMS
66-SD-1065
BLOWDOWN 150 TO C-6630
65-SD-1051 619 FC
3 TO E-6552 mm Hg
3
E-6620 SM 7620 kg/h (DES)
6150 kg/h (NOR)
BLOWDOWN
NNF 624
63-SD-1031 LC E-6624
FC
V-6620 606
FC

170 SCM

REFERENCE DRAWING TITLE

F-6624A/B
P-6624A/B
P-6625A/B P-6620A/B P-6621A/B P-6622A/B

STREAM NUMBER 605 606 607 608 618 619 624

STREAM DESCRIPTION MEG COLUMN MEG COLUMN MEG COLUMN MEG MEG COLUMN MEG COLUMN MEG COLUMN
4 OVERHEADS BOTTOMS VAPOR PRODUCT TO CONDENSER CONDENSER REFLUX REV DATE PROCESS CTRL SYS PIP EICS PROJ 4
DISTILLATE CRUDE STEAM BLOWDOWN
GLYCOL
HEATER Scientific Design Co., Inc.
MOLE FRACTION LIQUID 0.0 1.0 0.0 1.0 0.0 1.0 1.0 Little Ferry, New Jersey
TEMPERATURE (°C) 143 170 135 144 121 121 135 SD Project No. 53133
PRESSURE (barg) 110 mm Hg 5.1 85 mm Hg 4.5 1.0 9.2 5.8
PHASE VAPOR LIQUID VAPOR LIQUID VAPOR LIQUID LIQUID
VAPOR MASS FLOW RATE (kg/h) 124,551.5 5,043.1 51,370.4
VAPOR FLOW @ PRES & TEMP (m³/h) 471,857.5 25,353.5 46,617.7
VAPOR MOLECULAR WEIGHT 61.95 59.32 18.06 2 09/07/16 REVISED PER EPDP MEETING
VAPOR DEN @ PRESS &TEMP (kg/m³) 0.264 0.199 1.102 1 04/05/16 PER CLIENT COMMENTS
VAPOR VISCOSITY (cP) 0.012 0.012 0.013 REV DATE REVISIONS APPR.

LIQUID MASS FLOW RATE (kg/h) 18,757.4 87,500.0 13,375.1 119,508.5 This drawing and all information thereon is the property of "United" and shall not be
reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
LIQUID FLOW @ PRES & TEMP (m³/h) 18.7 85.9 14.1 116.5 other than that for which it is specifically furnished without the priorwritten consent
LIQUID MOLECULAR WEIGHT 91.16 62.09 19.39 62.07 of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 to "United.". 5
LIQUID DEN @ PRESS &TEMP (kg/m³) 1,002 1,018 952 1,026
LIQUID VISCOSITY (cP) 1.064 1.189 0.250 1.307 This space is reserved for the Arabic translation of the above paragraph.
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 0.00 0.00 0.00 0.00 99.67 89.97
JUBAIL UNITED
NITROGEN 0.15 0.00 3.81 0.00 0.00 0.00 PETROCHEMICAL COMPANY
ARGON JUPC EG-III
METHANE
ETHANE
MEG 99.84 25.19 96.19 99.98 0.31 10.00 100.00
PROCESS FLOW DIAGRAM
DEG 0.00 70.07 0.00 0.02 0.00 0.00 0.00 ETHYLENE GLYCOL PLANT
6 TEG 0.00 4.28 0.00 0.00 0.00 0.00 0.00
GLYCOL PURIFICATION 6
PEG 0.00 0.46 0.00 0.00 0.00 0.00 0.00
FORMALDEHYDE 0.00 0.00 0.00 0.00 0.01 0.03 0.00
ACETALDEHYDE 0.00 0.00 0.00 0.00 0.00 0.00 0.00 SCALE: None CHECKED: EG/RG
DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 FILENAME: 51331-66-SD-1062
SHT.: REV.
DWG. 66-SD-1062 2
A B C D E F G H J K
 A B C D E F G H J K

E-6622 V-6640 TK-6640A/B P-6640A/B

MEG PRODUCT MEG PRODUCT
GENERAL:
MEG PRODUCT MEG PRODUCT
COOLER RESIN DRUM RUNDOWN TANKS TRANSFER PUMPS 1. SD DRAWINGS 00-SD-0001 AND 00-SD-0002 FOR STANDARD SYMBOLS
1016 m³ 242 m³/h AND NOMENCLATURE.
6.47 MW (DES) 33.4 m³
3.32 MW (NOR)
NOTES:
1 1. FLOW INDICATES THE MEG PRODUCT PUMP-OUT RATE TO OSBL 1
STORAGE.

MEG REFLUX FLOW

66-SD-1062
FROM MEG REFLUX FLOW CONTROL

WC 464 m³/h

39

100 48 FC
MEG PRODUCT
66-SD-1061
2 2
FROM E-6613
E-6622

51 DES PRESSURE (barg)

45 NOR
COOLING WATER NL
TEMPERATURE - oC
66-SD-1061
TO E-6615 PC

V-6640

3 3

MEG PRODUCT
TK-6640A/B
627 OSBL
(NOTE 1) TO OSBL STORAGE

P-6640A/B

REFERENCE DRAWING TITLE

STREAM NUMBER 608 627
STREAM DESCRIPTION MEG MEG
PRODUCT TO PRODUCT
CRUDE (PUMP- OUT
GLYCOL RATE)
HEATER
MOLE FRACTION LIQUID 1.0 1.0
4 REV DATE PROCESS CTRL SYS PIP EICS PROJ 4
TEMPERATURE (°C) 144 48
PRESSURE (barg) 4.5 7.7
Scientific Design Co., Inc.
PHASE LIQUID LIQUID
Little Ferry, New Jersey
VAPOR MASS FLOW RATE (kg/h)
SD Project No. 53133
VAPOR FLOW @ PRES & TEMP (m³/h)
VAPOR MOLECULAR WEIGHT
VAPOR DEN @ PRESS &TEMP (kg/m³)
VAPOR VISCOSITY (cP)
LIQUID MASS FLOW RATE (kg/h) 87,500.0 264,700.0
LIQUID FLOW @ PRES & TEMP (m³/h) 85.92 242.0
REV DATE REVISIONS APPR.
LIQUID MOLECULAR WEIGHT 62.09 62.09
This drawing and all information thereon is the property of "United" and shall not be
LIQUID DEN @ PRESS &TEMP (kg/m³) 1018.39 1,093 reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
other than that for which it is specifically furnished without the priorwritten consent
LIQUID VISCOSITY (cP) 1.19 7.010 of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 COMPOSITION (WT.%) to "United.". 5
ETHYLENE This space is reserved for the Arabic translation of the above paragraph.
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 0.00 0.00
NITROGEN JUBAIL UNITED
ARGON PETROCHEMICAL COMPANY
METHANE
ETHANE
JUPC EG-III
MEG 99.98 99.98
DEG 0.02 0.02 PROCESS FLOW DIAGRAM
TEG 0.00 0.00 ETHYLENE GLYCOL PLANT
6 PEG 0.00 0.00 MEG PRODUCT RUNDOWN 6
FORMALDEHYDE 0.00 0.00
ACETALDEHYDE 0.00 0.00
SCALE: None CHECKED: EG/RG
DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
TOTAL (WT.%) 100.00 100.00 FILENAME: 53133-66-SD-1063
SHT.: REV.
DWG. 66-SD-1063 0
A B C D E F G H J K
 A B C D E F G H J K

E-6623 EJ-6622A EJ-6622 SU-6620 P-6623A/B

GENERAL:
MEG COLUMN MEG COLUMN MEG COLUMN MEG COLUMN MEG COLUMN
EJECTOR PRECONDENSER EJECTOR SYSTEM VACUUM PUMP SYSTEM HOTWELL HOTWELL PUMPS 1. SD DRAWINGS 00-SD-0001 AND 00-SD-0002 FOR STANDARD SYMBOLS
3.52 MW 25.1 m³ 43 m³/h AND NOMENCLATURE.

1 SM 1
NNF
135
MEG CONDENSER VENT
39
66-SD-1062 607 VACUUM PUMP VENT
FROM E-6621 WC
625 67-SD-1071
mm Hg
EJ-6622 TO SU-6710, SECT."B"
85
mm Hg 51
45 WR
45
NNF

51 BY VENDOR
39
WR
WC
39
2 E-6623 2
WC 201.8 m³/h EJ-6622A
MAKE-UP
TEG
VACUUM PUMP BLEED
615 67-SD-1071
TO SU-6710, SECT. "B" PRESSURE (barg)
51
45
WR VACUUM PUMP BLEED
610 TEMPERATURE - oC
620 66-SD-1065
NNF FROM EJ-6632

MEG RECYCLE
611 66-SD-1065
FROM C-6630
609

3 71
MEG RECYCLE 3
622 65-SD-1053
TO C-6531

NNF MEG RECYCLE

65-SD-1051
TO PK-6550
SU-6620 LC

C B A REFERENCE DRAWING TITLE

P-6623A/B
NNF WASTE WATER
69-SD-1093
TO WASTE WATER SUMP

STREAM NUMBER 609 610 615 622 625

4 STREAM DESCRIPTION MEG COLUMN MEG COLUMN MEG COLUMN MEG COLUMN MEG COLUMN REV DATE PROCESS CTRL SYS PIP EICS PROJ 4
PRE- VACUUM VACUUM LIGHTS VACUUM
CONDENSATE PUMP BLEED PUMP BLEED RECYCLE PUMP VENT
Scientific Design Co., Inc.
Little Ferry, New Jersey
MOLE FRACTION LIQUID 1.0 1.0 1.0 0.0
SD Project No. 53133
TEMPERATURE (°C) 45 45 72 45
PRESSURE (barg) 0.1 0.1 19.0 0.1
PHASE LIQUID LIQUID LIQUID VAPOR
VAPOR MASS FLOW RATE (kg/h) 192.3
VAPOR FLOW @ PRES & TEMP (m³/h) 164.7
VAPOR MOLECULAR WEIGHT 28.04 2 04/05/16 PER CLIENT COMMENTS
1 03/28/16 PER CLIENT COMMENTS
VAPOR DEN @ PRESS &TEMP (kg/m³) 1.168
REV DATE REVISIONS APPR.
VAPOR VISCOSITY (cP) 0.019
This drawing and all information thereon is the property of "United" and shall not be
LIQUID MASS FLOW RATE (kg/h) 4,843.6 6.2 10,471.7 reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
LIQUID FLOW @ PRES & TEMP (m³/h) 4.4 0.0 9.7 other than that for which it is specifically furnished without the priorwritten consent
of "United". The drawing and any copies thereof (partial or complete) shall be returned
LIQUID MOLECULAR WEIGHT 62.07 62.05 64.37 to "United.".
5 5
LIQUID DEN @ PRESS &TEMP (kg/m³) 1,097 1,097 1,077
This space is reserved for the Arabic translation of the above paragraph.
LIQUID VISCOSITY (cP) 7.734 7.728 3.710
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE JUBAIL UNITED
WATER 0.00 0.00 0.00 0.00
NITROGEN 0.00 0.01 0.00 99.81 PETROCHEMICAL COMPANY
ARGON JUPC EG-III
METHANE
ETHANE
MEG 100.00 99.98 91.41 0.19
PROCESS FLOW DIAGRAM
DEG 0.00 0.00 8.56 0.00 ETHYLENE GLYCOL PLANT
6 TEG 0.00 0.00 0.03 0.00 6
PEG 0.00 0.00 0.00 0.00
MEG COLUMN EJECTOR
FORMALDEHYDE 0.00 0.00 0.00 0.00
ACETALDEHYDE SCALE: None CHECKED: EG/RG
DATE: 03/28/16 APPROVED: SK
DRAWN: CAD APPROVED:
TOTAL (WT.%) 100.00 100.00 100.00 100.00 FILENAME: 53133-66-SD-1064
SHT.: REV.
DWG. 66-SD-1064 2
A B C D E F G H J K
 A B C D E F G H J K

E-6631 C-6630 E-6630 P-6630A/B EJ-6632A EJ-6632

MEG SPLITTER MEG SPLITTER MEG SPLITTER MEG SPLITTER MEG SPLITTER MEG SPLITTER
GENERAL:
CONDENSER REBOILER BOTTOMS PUMPS EJECTOR SYSTEM VACUUM PUMP SYSTEM 1. SD DRAWINGS 00-SD-0001 AND 00-SD-0002 FOR STANDARD SYMBOLS
3.86 MW (DES) 3.52 MW (DES) 482 m³/h AND NOMENCLATURE.
3.07 MW (NOR) 2.42 MW (NOR)
NOTES:
1 SM 1. THE MEG SPLITTER SYSTEM IS DESIGNED FOR 130% OF NORMAL 1
NNF HEAVY GLYCOL PRODUCTION.

39
WC VACUUM PUMP VENT
626 67-SD-1071
EJ-6632 TO SU-6710 SECT "B"
51
WR

WR NNF
NL

39
AFTER COOLER
39 51
COOLING WATER WC 621 67-SD-1071
276 m³/h 50
69-SD-1092 TO SU-6710 SECT "B"
2 BY VENDOR 2
FROM P-6910A/B
614 EJ-6632A
51 MAKE-UP
TEG
WR
E-6631
PRESSURE (barg)
PC
VACUUM PUMP BLEED
10 NNF
620 66-SD-1064
mm Hg TO SU-6620 SECT "B" TEMPERATURE - oC

AIR LEAKAGE 22
100 kg/h 91
MEG RECYCLE
21
611 66-SD-1064
TO SU-6620 SECT "A"
C-6630 FC
170
MEG COLUMN BOTTOMS
66-SD-1062 606 19 MEG RECYCLE
TC
FROM P-6620A/B FC NNF
65-SD-1056
16 6,720 m³/h (DES)
3 5,370 m³/h (NOR) TO C-6538 3
TC 185 SM
1

72

mm Hg
LC
E-6630
FC
MEG SPLITTER BOTTOMS
174 612 67-SD-1071
REFERENCE DRAWING TITLE
TO C-6710

SCM
P-6630A/B

4 REV DATE PROCESS CTRL SYS PIP EICS PROJ 4

STREAM NUMBER 611 612 614 620 621 626
STREAM DESCRIPTION MEG MEG MEG MEG EJ- 6632A MEG
SPLITTER SPLITTER SPLITTER SPLITTER AFTERSTAGE SPLITTER Scientific Design Co., Inc.
SIDEDRAW BOTTOMS VENT TO VACUUM CONDENSATE VACUUM Little Ferry, New Jersey
EJ- 6632 PUMP BLEED PUMP VENT
SD Project No. 53133
MOLE FRACTION LIQUID 1.0 1.0 0.0 1.0 0.0
TEMPERATURE (°C) 92 175 50 45 45
PRESSURE (barg) 0.1 5.1 7 mm Hg 0.1 0.1
PHASE LIQUID LIQUID VAPOR LIQUID VAPOR
VAPOR MASS FLOW RATE (kg/h) 67.6 100.2
VAPOR FLOW @ PRES & TEMP (m³/h) 5,954.8 85.8 1 03/28/16 PER CLIENT COMMENTS
VAPOR MOLECULAR WEIGHT 32.69 28.04 REV DATE REVISIONS APPR.
VAPOR DEN @ PRESS &TEMP (kg/m³) 0.011 1.168 This drawing and all information thereon is the property of "United" and shall not be
VAPOR VISCOSITY (cP) 0.017 0.019 reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
other than that for which it is specifically furnished without the priorwritten consent
LIQUID MASS FLOW RATE (kg/h) 5,605.1 13,136.6 16.9 of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 LIQUID FLOW @ PRES & TEMP (m³/h) 5.3 13.1 0.0 to "United.". 5
LIQUID MOLECULAR WEIGHT 66.51 108.37 62.12
This space is reserved for the Arabic translation of the above paragraph.
LIQUID DEN @ PRESS &TEMP (kg/m³) 1,062 1,000 1,097
LIQUID VISCOSITY (cP) 2.507 1.090 7.735
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
JUBAIL UNITED
WATER 0.00 0.00 0.00 0.00 0.00 PETROCHEMICAL COMPANY
NITROGEN 0.00 0.00 73.95 0.01 99.81
ARGON
JUPC EG-III
METHANE
ETHANE PROCESS FLOW DIAGRAM
MEG 83.95 0.02 25.99 99.76 0.19
DEG 16.00 93.23 0.06 0.23 0.00
ETHYLENE GLYCOL PLANT
6 TEG 0.05 6.09 0.00 0.00 0.00 MEG SPLITTER 6
PEG 0.00 0.66 0.00 0.00 0.00
FORMALDEHYDE
ACETALDEHYDE SCALE: None CHECKED: EG/RG
DATE: 03/28/16 APPROVED: SK
DRAWN: CAD APPROVED:
TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 FILENAME: 53133-66-SD-1065
SHT.: REV.
DWG. 66-SD-1065 1
A B C D E F G H J K
 A B C D E F G H J K

SU-6710 EJ-6712A EJ-6712 P-6715 E-6715 E-6711 C-6710 P-6710A/B E-6710 E-6712 P-6711A/B TK-6730A/B P-6730A/B V-6730
DEG/TEG COLUMN
GENERAL:
DEG/TEG COLUMN DEG/TEG COLUMN CRUDE HEAVY CRUDE HEAVY DEG COLUMN DEG COLUMN DEG COLUMN DEG COLUMN DEG PRODUCT DEG COLUMN DEG RUNDOWN DEG PRODUCT DEG PRODUCT
HOTWELL EJECTOR SYSTEM VACUUM PUMP SYSTEM GLYCOL PUMP GLYCOL COOLER CONDENSER BOTTOMS PUMPS REBOILER COOLER REFLUX PUMPS TANKS TRANSFER PUMPS RESIN DRUM 1. SD DRAWINGS 00-SD-0001 AND 00-SD-0002 FOR STANDARD SYMBOLS
13.2 m³ 14 m³/h 0.97 MW (DES) 5.89 MW (DES) 870 m³/h 6.43 MW (DES) 0.72 MW (DES) 38.6 m³/h 322.3 m³ 75 m³/h 5.1 m³ AND NOMENCLATURE.
0 MW (NOR) 5.43 MW (NOR) 4.33 MW (NOR) 0.69 MW (NOR)

TEG COND. VENT TEG CATCHPAN PURGE

NOTES:
1 67-SD-1072 710 708 67-SD-1072 1. THE DEG COLUMN DESIGN CONDITIONS ARE BASED ON 130% OF 1
FROM E-6721 NNF FROM C-6720 NORMAL FEED RATE AND 0.35 WT% DEG IN THE DEG COLUMN BOTTOMS.
2. MATERIAL BALANCE IS BASED ON NORMAL FEED RATE AND 0.35 WT%
SM DEG IN THE DEG COLUMN BOTTOMS.
3. FLOW INDICATES THE DEG PRODUCT PUMP-OUT RATE TO OSBL
WR STORAGE.
WC

39 mm Hg 51 39
COOLING WATER
422.5 m³/h
51 EJ-6712 69-SD-1092
5
50 FROM P-6910A/B
E-6711
WR NNF
709
mm Hg

PC 10
BY VENDOR DEG CATCHPAN PURGE
39 704 69-SD-1094
AIR
TO INCINERATION
2 51
WC NL LEAKAGE
81 kg/h
LC VIA GLYCOL SUMP 2
EJ-6712A 131
WR
MAKE-UP
TEG

NNF DEG COL'N BOTTOMS

NNF FC 705 67-SD-1072 PRESSURE (barg)
MEG SPLITTER BTMS
TO C-6720
66-SD-1065 612 20,090 kg/h (DES)
C-6710
FROM P-6630A/B 714 18,120 kg/h (NOR) TEMPERATURE - oC
175
VACUUM PUMP VENT
66-SD-1064 625
FROM EJ-6622 TC

NNF
V-6730 DEG PRODUCT
VACUUM PUMP VENT NOR
69.6 m³/h 39 mm Hg FC
66-SD-1065 626 711 706 188 131 48 716 OSBL
51 DES
FROM EJ-6632 (NOTE 3)
25
VACUUM PUMP BLEED WC WR SM
66-SD-1064 615 ATM.
FROM EJ-6622 E-6715 12,300 kg/h (DES)
3 AFTER COOLER 9,620 kg/h (NOR) 3
39 E-6710
66-SD-1065 621
51 NL
FROM EJ-6632A SCM
LC
WR
FC PC

FC E-6712
SU-6710

WASTE WATER 701

178

SECT. "A"
69-SD-1093 715
TO WASTE WATER SUMP 39 REFERENCE DRAWING TITLE
SECT. SECT.
"B" "A" WC TK-6730A/B

56.3 m³/h
P-6715 TK-6615B P-6710A/B P-6711A/B P-6730A/B

4 STREAM NUMBER 701 704 705 706 709 711 714 715 716
REV DATE PROCESS CTRL SYS PIP EICS PROJ 4
STREAM DESCRIPTION DEG DEG COLUMN DEG COLUMN DEG/TEG DEG DEG/TEG DEG/TEG DEG DEG
PRODUCT CATCHPAN BOTTOMS EJECTOR CONDENSER COLUMN COLUMN HOTWELL PRODUCT
PURGE INTER- VENT VACUUM VAUUM PUMP CONDENSATE (PUMP- OUT
Scientific Design Co., Inc.
CONDENSATE PUMP BLEED VENT RATE) Little Ferry, New Jersey
SD Project No. 53133
MOLE FRACTION LIQUID 1.0 1.0 1.0 0.0 1.0 0.0 1.0 1.0
TEMPERATURE (°C) 48 128 180 50 45 45 45 48
PRESSURE (barg) 4.8 0.1 5.8 7 mm Hg 0.1 0.1 0.1 5.9
PHASE LIQUID LIQUID LIQUID VAPOR LIQUID VAPOR LIQUID LIQUID
VAPOR MASS FLOW RATE (kg/h) 84.0 194.2 3 09/07/16 REVISED PER EPDP
VAPOR FLOW @ PRES & TEMP (m³/h) 5,888.6 166.4 2 04/05/16 PER CLIENT COMMENTS
VAPOR MOLECULAR WEIGHT 28.73 28.03 1 03/28/16 PER CLIENT COMMENTS
REV DATE REVISIONS APPR.
VAPOR DEN @ PRESS &TEMP (kg/m³) 0.014 1.167
This drawing and all information thereon is the property of "United" and shall not be
VAPOR VISCOSITY (cP) 0.019 0.019 reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
LIQUID MASS FLOW RATE (kg/h) 12,142.5 103.3 984.7 2.9 4.3 82,471.1 other than that for which it is specifically furnished without the priorwritten consent
LIQUID FLOW @ PRES & TEMP (m³/h) 11.0 0.1 1.0 0.0 0.0 75.0 of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 to "United.". 5
LIQUID MOLECULAR WEIGHT 106.12 105.18 153.01 90.99 84.57 106.12
LIQUID DEN @ PRESS &TEMP (kg/m³) 1,100 1,038 1,013 1,100 1,100 1,100 This space is reserved for the Arabic translation of the above paragraph.
LIQUID VISCOSITY (cP) 11.866 1.761 1.242 11.164 10.367 11.866
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE JUBAIL UNITED
WATER
NITROGEN
0.00
0.00
0.00
0.00
0.00
0.00
0.00
96.48
0.01
0.03
0.00
99.92
0.00
0.02
0.00
0.00
PETROCHEMICAL COMPANY
ARGON JUPC EG-III
METHANE
ETHANE
PROCESS FLOW DIAGRAM
MEG 0.01 1.25 0.00 0.45 23.51 0.06 36.80 0.01
DEG 99.99 98.74 0.35 3.07 75.91 0.02 60.78 99.99 ETHYLENE GLYCOL PLANT
6 TEG 0.00 0.00 90.83 0.00 0.54 0.00 2.39 0.00 DEG PURIFICATION 6
PEG 0.00 0.00 8.82 0.00 0.00 0.00 0.00 0.00
FORMALDEHYDE
ACETALDEHYDE SCALE: None CHECKED: EG/RG
DATE: 03/28/16 APPROVED: SK
DRAWN: CAD APPROVED:
TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 FILENAME: 53133-67-SD-1071
SHT.: REV.
DWG. 67-SD-1071 3
A B C D E F G H J K
 A B C D E F G H J K

E-6721 C-6720 P-6720A/B E-6720 V-6740 E-6722 TK-6740 P-6740A/B P-6721A/B

GENERAL:
TEG COLUMN TEG COLUMN TEG COLUMN TEG COLUMN TEG PRODUCT TEG PRODUCT TEG RUNDOWN TEG PRODUCT TEG COLUMN
CONDENSER BOTTOMS PUMPS REBOILER RESIN DRUM COOLER TANK TRANSFER PUMPS REFLUX PUMPS 1. SD DRAWINGS 00-SD-0001 AND 00-SD-0002 FOR STANDARD SYMBOLS
0.69 MW (DES) 202 m³/h 0.68 MW (DES) 0.6 m³ 0.067 MW (DES) 65.3 m³ 14 m³/h 5.5 m³/h AND NOMENCLATURE.
0.54 MW (NOR) 0.55 MW (NOR) 0.061 MW (NOR)
NOTES:
1 49 NOR TEG CATCHPAN PURGE 1. DEG COLUMN DESIGN CONDITIONS ARE BASED ON 130% OF NORMAL 1
39 51 DES 708 67-SD-1071 TEG PRODUCTION AND 3 WT% DEG COLUMN BOTTOMS.
COOLING WATER
49.4 m³/h TO C-6710 2. MATERIAL BALANCE IS BASED ON NORMAL TEG PRODUCTION RATE
69-SD-1092 WR
AND 0.35 WT% DEG IN THE DEG COLUMN BOTTOMS.
FROM P-6910A/B TEG CATCHPAN PURGE
3. FLOW INDICATES THE TEG PRODUCT PUMP-OUT RATE TO OSBL
E-6721 69-SD-1094 STORAGE.
TEG COND. VENT 50
mm Hg
TO SU-6971
67-SD-1071 710
10
TO EJ-6712 TEG COLUMN BOTTOMS
16 kg/h
AIR 707 OSBL
LEAKAGE TO INCINERATION
LC

C-6720
WR
3,850 kg/h (DES)
3,500 kg/h (NOR)
178 FC 48 NOR
2 DEG COL'N BOTTOMS
49 DES
2
67-SD-1071 705
FROM P-6710A/B 165
TC
194 E-6722
mm Hg FC
SM 1,300 kg/h (DES) PRESSURE (barg)
25 1,210 kg/h (NOR)
702

48 TEMPERATURE - oC
NL
LC
E-6720 PC
39 FC

TK-6740
190 TEG PRODUCT
SCM
717 OSBL
(NOTE 3)
48
V-6740 A B
3 FC 3
WC

6.1 m³/h
P-6721A/B P-6740A/B
P-6720A/B

STREAM NUMBER 702 707 708 710 717 REFERENCE DRAWING TITLE

STREAM DESCRIPTION TEG TEG COLUMN TEG COLUMN TEG TEG

PRODUCT BOTTOMS TO CATCHPAN CONDENSER PRODUCT
OSBL VENT (PUMP- OUT
INCINERATOR RATE)

MOLE FRACTION LIQUID 1.0 1.0 1.0 0.0 1.0

4 REV DATE PROCESS CTRL SYS PIP EICS PROJ 4
TEMPERATURE (°C) 48 86 146 50 48
PRESSURE (barg) 3.4 5.5 0.1 7 mm Hg 5.9
Scientific Design Co., Inc.
PHASE LIQUID LIQUID LIQUID VAPOR LIQUID
Little Ferry, New Jersey
VAPOR MASS FLOW RATE (kg/h) 16.1
SD Project No. 53133
VAPOR FLOW @ PRES & TEMP (m³/h) 1,152.9
VAPOR MOLECULAR WEIGHT 28.19
VAPOR DEN @ PRESS &TEMP (kg/m³) 0.014
VAPOR VISCOSITY (cP) 0.019
LIQUID MASS FLOW RATE (kg/h) 712.5 173.6 98.5 15,529.9
LIQUID FLOW @ PRES & TEMP (m³/h) 0.6 0.2 0.1 14.0 1 09/07/16 REVISED PER EPDP
REV DATE REVISIONS APPR.
LIQUID MOLECULAR WEIGHT 150.15 169.38 148.18 150.15
This drawing and all information thereon is the property of "United" and shall not be
LIQUID DEN @ PRESS &TEMP (kg/m³) 1,109 1,082 1,037 1,109 reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
other than that for which it is specifically furnished without the priorwritten consent
LIQUID VISCOSITY (cP) 14.370 4.604 1.686 14.370 of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 COMPOSITION (WT.%) to "United.". 5
ETHYLENE This space is reserved for the Arabic translation of the above paragraph.
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER
NITROGEN 0.00 0.00 0.00 99.22 0.00 JUBAIL UNITED
ARGON
PETROCHEMICAL COMPANY
METHANE
ETHANE
JUPC EG-III
MEG 0.00 0.00 0.00 0.00 0.00
DEG 0.03 0.00 3.24 0.14 0.03 PROCESS FLOW DIAGRAM
TEG 99.97 50.00 96.76 0.63 99.97 ETHYLENE GLYCOL PLANT
6 PEG 0.00 50.00 0.00 0.00 0.00 TEG PURIFICATION 6
FORMALDEHYDE
ACETALDEHYDE
SCALE: None CHECKED: EG/RG
DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 FILENAME: 53133-67-SD-1072
SHT.: REV.
DWG. 67-SD-1072 1
A B C D E F G H J K
 A B C D E F G H J K

P-6930A/B V-6930 E-6935 E-6930 P-6925A/B V-6920 P-6920A/B E-6920A/B

BLOWDOWN BLOWDOWN SUSPECT CONDENSATE CLEAN CONDENSATE SUSPECT CONDENSATE CONDENSATE CLEAN CONDENSATE BFW/CONDENSATE
GENERAL:
PUMPS FLASH DRUM COOLER COOLER PUMPS FLASH DRUM PUMPS EXCHANGER 1. SD DRAWINGS 00-SD-0001 AND 00-SD-0002 FOR STANDARD SYMBOLS
28 m³/h 4.8 m³ 0.61 MW 4.3 MW 35 m³/h 86.1 m³ 230 m³/h 11.6 MW AND NOMENCLATURE.

1 1
PC

160 SL
SUSPECT CONDENSATE
65-SD-1052 120 LP STEAM
FROM E-6524 410 kg/h
11 EOR 65-SD-1052
TO C-6510
214 10 SOR

SCM

FLASH STEAM 120 188 EOR

1,700 kg/h 192 LC
62-SD-1021 184 SOR 155 EOR
TO C-6220 SCI
165 SOR

WB
700 kg/h

2 1 2
1
105
BOILER FEED WATER
OSBL
235 SOR LC
BLOWDOWN
2,580 kg/h PRESSURE (barg)
61-SD-1011 E-6920A/B
FROM V-6110 AND V-6120
TEMPERATURE - oC
V-6930
< PC 114 EOR
203 SOR 1 116 SOR
BLOWDOWN 1,000 kg/h
700 kg/h
61-SD-1011
FROM V-6112 AND V-6122 START-UP BLOWDOWN
V-6920
LC 61-SD-1011
FROM P-6110/6120 AND
SCL 51 V-6112/6122
SL
3 LC
WR 3
51 100
120
WR
SCL
BLOWDOWN 120
100 120 E-6930
2,580 kg/h 9,440 kg/h
OSBL
SCS 39
TO DEMINERALIZER
39 WC 307.5 m³/h
E-6935
44 m³/h WC
P-6930A/B CONDENSATE
P-6925A/B P-6920A/B
69-SD-1093
REFERENCE DRAWING TITLE
TO E-6960
FLOW CONTROL
62-SD-1021

SELECTOR SWITCH
62-SD-1021

4 REV DATE PROCESS CTRL SYS PIP EICS PROJ 4

Scientific Design Co., Inc.

Little Ferry, New Jersey
SD Project No. 53133

1 09/06/16 REVISED PER EPDP MEETING

REV DATE REVISIONS APPR.
This drawing and all information thereon is the property of "United" and shall not be
reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
other than that for which it is specifically furnished without the priorwritten consent
of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 to "United.". 5
This space is reserved for the Arabic translation of the above paragraph.

JUBAIL UNITED
PETROCHEMICAL COMPANY
JUPC EG-III
PROCESS FLOW DIAGRAM
ETHYLENE GLYCOL PLANT
6 CONDENSATE SYSTEM 6

SCALE: None CHECKED: EG/RG

DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
FILENAME: 53133-69-SD-1091
SHT.: REV.
DWG. 69-SD-1091 1
A B C D E F G H J K
 A B C D E F G H J K

P-6910A/B K-6950 V-6950

GENERAL:
COOLING WATER HIGH PRESSURE HIGH PRESSURE
BOOSTER PUMPS NITROGEN COMPRESSOR NITROGEN SURGE DRUM 1. SD DRAWINGS 00-SD-0001 AND 00-SD-0002 FOR STANDARD SYMBOLS
830 m³/h 445 Std. m³/h 145.6 m³ AND NOMENCLATURE.

45 HP NITROGEN
1 61-SD-1011
1
7 TO MX-6110
AMB
WR WC
60
NITROGEN
OSBL NL

49 39 HP NITROGEN
61-SD-1011
TO V-6140

PACKAGE BY VENDOR

3.5
AMB
DEMIN. WATER
OSBL WP
V-6950
2 2

AMB 2.0
20% CAUSTIC
OSBL KC 45
PRESSURE (barg)

2.0 TEMPERATURE - oC
AMB
30% HCL
OSBL HCL

K-6950

3 COOLING WATER 3
66-SD-1065
TO E-6631
39
COOLING WATER
39
67-SD-1071
TO E-6711
WC

COOLING WATER
67-SD-1072
P-6910A/B TO E-6721 REFERENCE DRAWING TITLE

4 REV DATE PROCESS CTRL SYS PIP EICS PROJ 4

Scientific Design Co., Inc.

Little Ferry, New Jersey
SD Project No. 53133

REV DATE REVISIONS APPR.

This drawing and all information thereon is the property of "United" and shall not be
reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
other than that for which it is specifically furnished without the priorwritten consent
of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 to "United.". 5
This space is reserved for the Arabic translation of the above paragraph.

JUBAIL UNITED
PETROCHEMICAL COMPANY
JUPC EG-III
PROCESS FLOW DIAGRAM
ETHYLENE GLYCOL PLANT
6 HP NITROGEN SYSTEM 6
AND MISCELLANEOUS UTILITIES
SCALE: None CHECKED: EG/RG
DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
FILENAME: 53133-69-SD-1092
SHT.: REV.
DWG. 69-SD-1092 0
A B C D E F G H J K
 A B C D E F G H J K

E-6960 TK-6960 P-6960A/B SU-6970 P-6970A/B SU-6975 P-6975A/B

GENERAL:
PROCESS WATER COOLER PROCESS WATER TANK PROCESS WATER PUMPS WASTE WATER SUMP WASTE WATER PUMPS NEUTRALIZATION SUMP NEUTRALIZATION PUMPS
1000 m³ (R-1) 350 m³/h (R-1) 220.5 m³ 40 m³/h 3,456 m³ 580 m³/h 1. SD DRAWINGS 00-SD-0001 AND 00-SD-0002 FOR STANDARD SYMBOLS
AND NOMENCLATURE.

1 1

E-6960
120
WP
294,000 kg/h (DES)
CONDENSATE 43,850 kg/h (NOR)
69-SD-1091
FROM P-6920A/B 85,000 kg/h (DES)
43,850 kg/h (NOR)

TK-6960

60

WI

2 P-6960A/B 2

60
WASTE WATER
65-SD-1051 538 PRESSURE (barg)
FROM PK-6550 45
WASTE WATER
TEMPERATURE - oC
901 OSBL
WASTE WATER 45
66-SD-1061 604 60 WASTE WATER
FROM P-6611A/B
45 902 OSBL
WASTE WATER
65-SD-1052 539
FROM E-6560

45
WASTE WATER
63-SD-1032 315
3 3
FROM V-6320
GLYCOL WASTE
NNF
69-SD-1094
P-6970A/B P-6975A/B
FROM P-6971A/B
WASTE WASTE SU-6970 SU-6975
NNF
62-SD-1021
FROM P-6222A/B
WASTE WATER
66-SD-1064 NNF
FROM SU-6620 REFERENCE DRAWING TITLE
45
WASTE WATER
67-SD-1071 715
FROM SU-6710
CARRYOVER
NNF
61-SD-1012
FROM C-6115

4 REV DATE PROCESS CTRL SYS PIP EICS PROJ 4

STREAM NUMBER 315 538 539 604 715 901 902
STREAM DESCRIPTION RECLAIM TREATING ALDEHYDE DRYING DEG WASTE WASTE
COMP'R UNIT WASTE PURGE COLUMN HOTWELL WATER TO WATER TO Scientific Design Co., Inc.
KO DRUM WATER CONDENSATE CONDENSATE OSBL OSBL Little Ferry, New Jersey
COND TO WASTE
SD Project No. 53133
MOLE FRACTION LIQUID 1.0 1.0 1.0 1.0 1.0 1.0 1.0
TEMPERATURE (°C) 45.0 60 45 45 45 45 60
PRESSURE (barg) 3.0 3.9 2.1 4.6 0.1 8.0 8.0
PHASE LIQUID LIQUID LIQUID LIQUID LIQUID LIQUID LIQUID
VAPOR MASS FLOW RATE (kg/h)
VAPOR FLOW @ PRES & TEMP (m³/h) 1 04/21/16 PER P&ID REVIEW
VAPOR MOLECULAR WEIGHT REV DATE REVISIONS APPR.
VAPOR DEN @ PRESS &TEMP (kg/m³) This drawing and all information thereon is the property of "United" and shall not be
VAPOR VISCOSITY (cP) reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
other than that for which it is specifically furnished without the priorwritten consent
LIQUID MASS FLOW RATE (kg/h) 1,281.5 23,650.5 11,667.9 15,386.3 4.3 28,340.0 23,650.5 of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 LIQUID FLOW @ PRES & TEMP (m³/h) 1.3 24.1 11.8 15.6 0.0 28.6 24.1 to "United.". 5
LIQUID MOLECULAR WEIGHT 18.02 18.10 18.02 18.02 84.57 18.03 18.10
This space is reserved for the Arabic translation of the above paragraph.
LIQUID DEN @ PRESS &TEMP (kg/m³) 989 982 987 987 1100 990 983
LIQUID VISCOSITY (cP) 0.657 0.463 0.600 0.598 10.367 0.598 0.466
COMPOSITION (WT.%)
ETHYLENE 0.00
OXYGEN 0.00
ETHYLENE OXIDE 0.00
CARBON DIOXIDE 0.04
JUBAIL UNITED
WATER 99.95 99.86 99.96 99.99 0.00 99.96 99.86 PETROCHEMICAL COMPANY
NITROGEN 0.00 0.00 0.00 0.00 0.02 0.00 0.00
ARGON 0.00
JUPC EG-III
METHANE 0.00
ETHANE 0.00 PROCESS FLOW DIAGRAM
MEG 0.00 0.14 0.04 0.01 36.80 0.03 0.14
DEG 0.00 0.00 0.00 0.00 60.78 0.01 0.00
ETHYLENE GLYCOL PLANT
6 TEG 0.00 0.00 0.00 0.00 2.39 0.00 0.00 PROCESS WATER SYSTEM 6
PEG 0.00 0.00 0.00 0.00 0.00 0.00 0.00
FORMALDEHYDE 0.00 0.00 0.00 0.00 0.00 0.00 0.00 AND WASTE WATER SYSTEM
ACETALDEHYDE 0.00 0.00 0.00 0.00 0.00 0.00 0.00 SCALE: None CHECKED: EG/RG
DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 FILENAME: 53133-69-SD-1093
SHT.: REV.
DWG. 69-SD-1093 1
A B C D E F G H J K
 A B C D E F G H J K

SU-6972 P-6972A/B SU-6971 P-6971A/B

GENERAL:
CARBONATE SUMP CARBONATE SUMP PUMPS ETHYLENE GLYCOL SUMP ETHYLENE GLYCOL
141 m³ SUMP PUMPS
36 m³/h 526.5 m³ 1. SD DRAWINGS 00-SD-0001 AND 00-SD-0002 FOR STANDARD SYMBOLS
23 m³/h AND NOMENCLATURE.

1 NOTES: 1

2 2
CARBONATE SOLUTION
62-SD-1021
TO P-6230

PRESSURE (barg)

SL TEMPERATURE - oC

GLYCOL WASTE
69-SD-1093
WI TO SU-6970
GLYCOL
66-SD-1061
TO E-6615
K 2 CO 3
3 GLYCOL WATER 3
OSBL
V2O5
CARRY OVER
63-SD-1031
FROM D-6315
H 3 BO 3
GLYCOL DRAINS

P-6972A/B
GLYCOL PURGE
CARBONATE DRAINS 67-SD-1071 REFERENCE DRAWING TITLE
FROM C-6710 CATCHPAN
P-6971A/B
GLYCOL PURGE
67-SD-1072
FROM C-6720 CATCHPAN

4 REV DATE PROCESS CTRL SYS PIP EICS PROJ 4

Scientific Design Co., Inc.

Little Ferry, New Jersey
SD Project No. 53133

SU-6972 SU-6971

1 04/21/16 PER P&ID REVIEW

REV DATE REVISIONS APPR.
This drawing and all information thereon is the property of "United" and shall not be
reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
other than that for which it is specifically furnished without the priorwritten consent
of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 to "United.". 5
This space is reserved for the Arabic translation of the above paragraph.

JUBAIL UNITED
PETROCHEMICAL COMPANY
JUPC EG-III
PROCESS FLOW DIAGRAM
ETHYLENE GLYCOL PLANT
6 CARBONATE SUMP AND GLYCOL SUMP 6
COLLECTION SYSTEMS
SCALE: None CHECKED: EG/RG
DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
FILENAME: 53133-69-SD-1094
SHT.: REV.
DWG. 69-SD-1094 1
A B C D E F G H J K
 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page 2.2 - 2

B. MATERIAL BALANCES

The material balances for the following cases are presented:

1. SOR and 25/1 Water/EO Ratio with production capacity of 700,000 metric tons/year MEG
2. EOR and 25/1 Water/EO Ratio with production capacity of 700,000 metric tons/year MEG
3. SOR and 17/1 Water/EO Ratio with production capacity of 700,000 metric tons/year MEG
(located on the process flowsheets)
4. EOR and 17/1 Water/EO Ratio with production capacity of 700,000 metric tons/year MEG

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ SOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 61-SD-1011
DATE: 9/7/2016
(R-3) (R-3) (R-3)
STREAM NUMBER 101 102 103 104 105 106 107 108 109
STREAM DESCRIPTION ETHYLENE OXYGEN METHANE TOTAL FEED TO FEED TO REACTOR REACTOR TOTAL
FEED FEED BALLAST REACTOR REACTOR REACTOR R-6110 R-6120 REACTOR
FEED R-6110 R-6120 OUTLET OUTLET OUTLET

MOLE FRACTION LIQUID 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
TEMPERATURE (°C) 35 35 35 57 57 57 86 86 86
PRESSURE (barg) 40.0 27.0 21.0 21.0 21.0 21.0 18.9 18.9 18.9
PHASE VAPOR VAPOR VAPOR VAPOR VAPOR VAPOR VAPOR VAPOR VAPOR
VAPOR MASS FLOW RATE (kg/h) 48,202.7 39,906.2 147.2 1,704,690.8 852,345.4 852,345.4 852,345.4 852,345.4 1,704,690.8
VAPOR FLOW @ PRES & TEMP (m³/h) 806.9 1,123.1 10.3 84,993.2 42,496.6 42,496.6 51,048.9 51,048.9 102,097.9
VAPOR MOLECULAR WEIGHT 28.05 32.01 16.04 24.10 24.10 24.10 24.37 24.37 24.37
VAPOR DEN @ PRESS &TEMP (kg/m³) 59.741 35.533 14.256 20.057 20.057 20.057 16.697 16.697 16.697
VAPOR VISCOSITY (cP) 0.010 0.021 0.011 0.015 0.015 0.015 0.015 0.015 0.015
LIQUID MASS FLOW RATE (kg/h)
LIQUID FLOW @ PRES & TEMP (m³/h)
LIQUID MOLECULAR WEIGHT
LIQUID DEN @ PRESS &TEMP (kg/m³)
LIQUID VISCOSITY (cP)
COMPOSITION (WT.%)
ETHYLENE 99.92 34.93 34.93 34.93 32.11 32.11 32.11
OXYGEN 99.75 10.09 10.09 10.09 7.76 7.76 7.76
ETHYLENE OXIDE 0.00 0.00 0.00 4.02 4.02 4.02
CARBON DIOXIDE 1.83 1.83 1.83 2.62 2.62 2.62
WATER 0.36 0.36 0.36 0.69 0.69 0.69
NITROGEN 0.00 0.35 0.35 0.35 0.35 0.35 0.35
ARGON 0.24 19.40 19.40 19.40 19.40 19.40 19.40
METHANE 0.03 100.00 32.02 32.02 32.02 32.02 32.02 32.02
ETHANE 0.05 1.03 1.03 1.03 1.03 1.03 1.03
MEG 0.00 0.00 0.00 0.00 0.00 0.00
DEG
TEG
PEG
FORMALDEHYDE 0.00 0.00 0.00 0.00 0.00 0.00
ACETALDEHYDE 0.00 0.00 0.00 0.00 0.00 0.00
K2CO3
KHCO3
TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ SOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 61-SD-1012
DATE: 3/11/2016

STREAM NUMBER 110 111 112 113 114 115 116 117 118 119 120 121
STREAM DESCRIPTION RICH CYCLE WASH TOWER LEAN CYCLE CYCLE GAS RICH WASH WATER PRE- WASH WATER WASH WATER SCRUBBER CONTACTOR CONTACTOR
WATER OVERHEAD GAS TO PURGE CARBONATE FROM SATURATOR PURGE TO OVERHEADS FEED GAS OVERHEADS
RECYCLE SOLUTION CARBONATE BOTTOMS CARBONATE
COMPRESSOR KO DRUM KO DRUM

MOLE FRACTION LIQUID 1.0 0.0 0.0 0.0 1.0 1.0 1.0 1.0 1.0 0.0 0.0 0.0
TEMPERATURE (°C) 57 45 45 45 105 69 47 48 43 34 67 81
PRESSURE (barg) 18.1 18.5 18.4 18.5 17.5 18.5 18.7 28.7 27.7 18.6 18.6 18.5
PHASE LIQUID VAPOR VAPOR VAPOR LIQUID LIQUID LIQUID LIQUID LIQUID VAPOR VAPOR VAPOR
VAPOR MASS FLOW RATE (kg/h) 1,617,056.3 1,616,582.0 474.9 1,625,666.7 1,643,849.6 1,637,011.6
VAPOR FLOW @ PRES & TEMP (m³/h) 88,362.0 88,796.8 25.9 84,271.8 95,982.4 101,048.3
VAPOR MOLECULAR WEIGHT 23.85 23.85 23.85 23.95 23.90 23.75
VAPOR DEN @ PRESS &TEMP (kg/m³) 18.300 18.205 18.300 19.291 17.127 16.200
VAPOR VISCOSITY (cP) 0.014 0.014 0.014 0.014 0.015 0.015
LIQUID MASS FLOW RATE (kg/h) 2,124,255.2 2,225,150.0 1,383,319.1 1,369,408.0 6,044.0 1,363,364.0
LIQUID FLOW @ PRES & TEMP (m³/h) 2,177.0 1,814.9 1,417.3 1,388.5 6.1 1,379.8
LIQUID MOLECULAR WEIGHT 18.63 23.41 18.02 18.02 18.02 18.02
LIQUID DEN @ PRESS &TEMP (kg/m³) 976 1,226 976 986 986 988
LIQUID VISCOSITY (cP) 0.495 0.624 0.407 0.574 0.571 0.622
COMPOSITION (WT.%)
ETHYLENE 0.04 33.85 33.85 33.85 0.02 0.03 0.04 0.04 0.04 33.62 33.31 33.43
OXYGEN 0.00 8.18 8.18 8.18 0.00 0.00 0.00 0.00 0.00 8.13 8.05 8.08
ETHYLENE OXIDE 3.23 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
CARBON DIOXIDE 0.02 1.93 1.93 1.93 0.01 0.02 0.03 0.02 2.72 2.81 1.89
WATER 94.77 0.38 0.38 0.38 71.77 99.93 99.89 99.89 99.89 0.20 1.07 1.62
NITROGEN 0.00 0.37 0.37 0.37 0.00 0.00 0.00 0.00 0.00 0.37 0.36 0.36
ARGON 0.01 20.45 20.45 20.45 0.00 0.01 0.01 0.01 0.01 20.33 20.12 20.20
METHANE 0.02 33.76 33.76 33.76 0.00 0.01 0.01 0.01 0.01 33.55 33.21 33.35
ETHANE 0.00 1.09 1.09 1.09 0.00 0.00 0.00 0.00 0.00 1.08 1.07 1.07
MEG 1.89 0.00 0.00 0.00 4.19 0.01 0.01 0.01 0.01 0.00 0.00 0.00
DEG
TEG
PEG
FORMALDEHYDE 0.02 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
ACETALDEHYDE 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
K2CO3 7.35
KHCO3 16.67
TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ SOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 62-SD-1021
DATE: 3/11/2016

STREAM NUMBER 201 202 203 204 205 206 207 208
STREAM DESCRIPTION TOTAL REGEN LEAN REGEN REGEN. PRE- REGEN. PRE- TOTAL REGEN. REGEN.
FEED FLASH CARBONATE OVERHEAD CONDENSER CONDENSER REGEN. FEED CONDENSER CONDENSER
LIQUID SOLUTION VAPOR COND. FLASH VAPOR VENT COND.

MOLE FRACTION LIQUID 1.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0
TEMPERATURE (°C) 105 113 106 83 83 105 60 60
PRESSURE (barg) 0.50 31.7 0.41 0.30 0.30 0.50 0.2 0.2
PHASE LIQUID LIQUID VAPOR VAPOR LIQUID VAPOR VAPOR LIQUID
VAPOR MASS FLOW RATE (kg/h) 23,318.1 17,318.1 4,152.6 14,968.4
VAPOR FLOW @ PRES & TEMP (m³/h) 18,669.5 11,542.4 3,521.2 8,792.3
VAPOR MOLECULAR WEIGHT 27.51 33.61 24.22 38.89
VAPOR DEN @ PRESS &TEMP (kg/m³) 1.249 1.500 1.179 1.702
VAPOR VISCOSITY (cP) 0.016 0.017 0.015 0.016
LIQUID MASS FLOW RATE (kg/h) 2,227,188.5 2,218,312.0 6,000.0 2,349.7
LIQUID FLOW @ PRES & TEMP (m³/h) 1,816.9 1,819.5 6.2 2.4
LIQUID MOLECULAR WEIGHT 23.38 23.22 18.05 18.02
LIQUID DEN @ PRESS &TEMP (kg/m³) 1,226 1,219 968 981
LIQUID VISCOSITY (cP) 0.625 0.584 0.339 0.466
COMPOSITION (WT.%)
ETHYLENE 0.00 0.00 0.01 0.01 0.00 9.80 0.01
OXYGEN 0.34
ETHYLENE OXIDE
CARBON DIOXIDE 0.00 58.33 78.54 0.00 37.24 90.87
WATER 71.92 72.67 41.59 21.44 99.73 46.65 9.12 99.93
NITROGEN 0.01
ARGON 1.01
METHANE 4.90
ETHANE 0.04
MEG 4.18 4.20 0.08 0.01 0.27 0.00 0.07
DEG
TEG
PEG
FORMALDEHYDE
ACETALDEHYDE
K2CO3 7.56 9.52
KHCO3 16.33 13.61
TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ SOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 63-SD-1031
DATE: 3/11/2016

STREAM NUMBER 301 302 303 304 305 306 307 308
STREAM DESCRIPTION STRIPPING STRIPPING STRIPPING MEG COL. CYCLE WATER LEAN CYLE STRIPPING REABSORBER
COLUMN COLUMN COLUMN CONDENSER BLEED WATER COLUMN FEED
OVERHEADS BOTTOMS BOTTOMS TO E- FEED REFLUX
6312

MOLE FRACTION LIQUID 0.0 1.0 1.0 1.0 1.0 1.0 1.0 0.0
TEMPERATURE (°C) 95 105 105 105 105 33 60 59
PRESSURE (barg) 0.6 0.2 10.0 10.0 9.0 18.0 6.0 0.5
PHASE VAPOR LIQUID LIQUID LIQUID LIQUID LIQUID LIQUID VAPOR
VAPOR MASS FLOW RATE (kg/h) 106,145.1 73,425.7
VAPOR FLOW @ PRES & TEMP (m³/h) 65,716.3 32,837.3
VAPOR MOLECULAR WEIGHT 30.34 40.26
VAPOR DEN @ PRESS &TEMP (kg/m³) 1.615 2.236
VAPOR VISCOSITY (cP) 0.012 0.011
LIQUID MASS FLOW RATE (kg/h) 2,141,145.6 2,045,245.2 73,083.9 22,781.6 2,045,231.4 41,718.9
LIQUID FLOW @ PRES & TEMP (m³/h) 2,239.4 2,139.5 76.5 23.8 2,057.3 43.4
LIQUID MOLECULAR WEIGHT 18.27 18.27 18.27 18.27 18.27 19.19
LIQUID DEN @ PRESS &TEMP (kg/m³) 956 956 956 956 994 962
LIQUID VISCOSITY (cP) 0.271 0.270 0.270 0.270 0.778 0.451
COMPOSITION (WT.%)
ETHYLENE 0.85 0.00 1.23
OXYGEN 0.07 0.00 0.10
ETHYLENE OXIDE 67.53 0.00 0.00 0.00 0.00 0.00 10.30 91.77
CARBON DIOXIDE 0.47 0.00 0.00 0.00 0.00 0.00 0.00 0.67
WATER 30.52 98.02 98.02 98.02 98.02 98.02 89.65 5.43
NITROGEN 0.00 0.00
ARGON 0.19 0.28
METHANE 0.31 0.45
ETHANE 0.01 0.02
MEG 0.01 1.96 1.96 1.96 1.96 1.96 0.03 0.00
DEG 0.00 0.00 0.00 0.00 0.00
TEG 0.00 0.00 0.00 0.00 0.00
PEG 0.00 0.00 0.00 0.00 0.00
FORMALDEHYDE 0.00 0.02 0.02 0.02 0.02 0.02 0.01 0.00
ACETALDEHYDE 0.03 0.00 0.00 0.00 0.00 0.00 0.01 0.04

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ SOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 63-SD-1032
DATE: 3/11/2016

STREAM NUMBER 309 310 311 312 313 314 315 316
STREAM DESCRIPTION REABSORBER REABSORBER REABSORBER REABSORBER REABSORBER RECLAIM RECLAIM RECLAIM GAS
WATER OVERHEAD GROSS RECIR- NET BOTTOMS COMPRESSOR COMP'R TO CO2
BOTTOMS CULATION FEED GAS KO DRUM REMOVAL
COND

MOLE FRACTION LIQUID 1.0 0.0 1.0 1.0 1.0 0.0 1.0 0.0
TEMPERATURE (°C) 43 43 48 48 53 45 45 127
PRESSURE (barg) 6.0 0.4 0.5 5.1 5.1 0.1 0.1 20.2
PHASE LIQUID VAPOR LIQUID LIQUID LIQUID VAPOR LIQUID VAPOR
VAPOR MASS FLOW RATE (kg/h) 2,110.5 4,441.8 4,271.8
VAPOR FLOW @ PRES & TEMP (m³/h) 1,435.7 3,474.4 209.3
VAPOR MOLECULAR WEIGHT 27.5 30.2 31.0
VAPOR DEN @ PRESS &TEMP (kg/m³) 1.5 1.278 20.410
VAPOR VISCOSITY (cP) 0.013 0.014 0.018
LIQUID MASS FLOW RATE (kg/h) 673,285.1 2,461,399.5 1,714,414.8 747,028.6 1,991.6
LIQUID FLOW @ PRES & TEMP (m³/h) 680.9 2,534.4 1,765.4 771.5 2.0
LIQUID MOLECULAR WEIGHT 18.09 19.14 19.14 19.14 18.02
LIQUID DEN @ PRESS &TEMP (kg/m³) 989 971 971 968 988
LIQUID VISCOSITY (cP) 0.626 0.552 0.551 0.508 0.641
COMPOSITION (WT.%)
ETHYLENE 0.00 42.82 0.00 0.00 0.00 29.53 0.00 30.71
OXYGEN 0.00 3.59 0.00 0.00 0.00 2.03 0.00 2.11
ETHYLENE OXIDE 0.00 0.00 9.32 9.32 9.32 0.00 0.00 0.00
CARBON DIOXIDE 0.00 23.42 0.01 0.01 0.01 45.94 0.04 47.76
WATER 99.46 4.05 90.18 90.18 90.18 4.54 99.95 0.75
NITROGEN 0.00 0.09 0.00 0.00 0.00 0.05 0.00 0.05
ARGON 0.00 9.77 0.00 0.00 0.00 5.58 0.00 5.81
METHANE 0.00 15.65 0.00 0.00 0.00 12.01 0.00 12.48
ETHANE 0.00 0.60 0.00 0.00 0.00 0.32 0.00 0.34
MEG 0.54 0.00 0.49 0.49 0.49 0.00 0.00 0.00
DEG 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
TEG 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
PEG 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
FORMALDEHYDE 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
ACETALDEHYDE 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ SOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 65-SD-1051
DATE: 3/11/2016

STREAM NUMBER 512 530 536 538 543 544 551 554 560
STREAM DESCRIPTION TREATED TREATED EVAP. TREATING UNIT EVAP. RECYCLE EVAP. DISPLACE- TREATED
CYCLE WATER WATER CONDENSATE WASTE WATER CONDENSATE WATER HOTWELL TO MENT WATER WATER TO
TO TREATED TO RECYCLE RECYCLE RECYCLE
WATER TANK WATER TANK WATER TANK WATER TANK

MOLE FRACTION LIQUID 1.0 1.0 1.0 1.0 1.0 1.0 1.0
TEMPERATURE (°C) 43 93 60 67 43 45 35
PRESSURE (barg) 6.1 19.6 3.9 1.0 6.5 5.4 2.0
PHASE LIQUID LIQUID LIQUID LIQUID LIQUID LIQUID LIQUID
VAPOR MASS FLOW RATE (kg/h)
VAPOR FLOW @ PRES & TEMP (m³/h)
VAPOR MOLECULAR WEIGHT
VAPOR DEN @ PRESS &TEMP (kg/m³)
VAPOR VISCOSITY (cP)
LIQUID MASS FLOW RATE (kg/h) 35,224.0 41,984.0 NNF 23,650.5 596,168.9 673,285.7 65,622.4 6,760.0
LIQUID FLOW @ PRES & TEMP (m³/h) 35.5 43.5 24.1 609.8 681.0 66.5 6.8
LIQUID MOLECULAR WEIGHT 18.65 18.55 18.10 18.09 18.09 18.02 18.02
LIQUID DEN @ PRESS &TEMP (kg/m³) 993 966 982 978 989 987 991
LIQUID VISCOSITY (cP) 0.660 0.314 0.463 0.423 0.625 0.598 0.728
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 98.82 95.97 99.86 99.39 99.46 100.00 100.00
NITROGEN
ARGON
METHANE
ETHANE
MEG 1.18 4.03 0.14 0.61 0.54 0.00 0.00
DEG
TEG
PEG
FORMALDEHYDE 0.00 0.00
ACETALDEHYDE

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ SOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 65-SD-1052
DATE: 3/11/2016

STREAM NUMBER 501 502 503 504 505 513 528 539 552 553 574
STREAM DESCRIPTION GLYCOL FEED GLYCOL FEED EXTRACTION GLYCOL GLYCOL ALDEHYDE EVAPORATOR ALDEHYDE EXTRACTION WASTE WATER EVAPORATOR
STRIPPER STRIPPER STEAM TO REACTOR REACTOR STRIPPER CONDENSATE PURGE STEAM TO VOC STRIPPER COND. TO
OVERHEADS BOTTOMS GLYCOL FEED FEED OUTLET OVERHEAD E-6521 OVERHEAD REABSORBER
STRIPPER BTMS HEATER

MOLE FRACTION LIQUID 0.0 1.0 0.0 1.0 1.0 0.0 1.0 1.0 0.0 0.0 1.0
TEMPERATURE (°C) 56 65 123 151 195 190 113 45 123 133 73
PRESSURE (barg) 0.5 0.5 1.2 22.0 22.0 11.8 4.4 2.1 1.2 2.0 0.6
PHASE VAPOR LIQUID VAPOR LIQUID LIQUID VAPOR LIQUID LIQUID VAPOR VAPOR LIQUID
VAPOR MASS FLOW RATE (kg/h) 2,427.8 13,421.3 12,352.3 18,658.6 2,646.8
VAPOR FLOW @ PRES & TEMP (m³/h) 1,076.5 11,129.9 1,947.5 15,473.1 1,633.5
VAPOR MOLECULAR WEIGHT 41.06 18.05 18.04 18.05 18.13
VAPOR DEN @ PRESS &TEMP (kg/m³) 2.255 1.206 6.343 1.206 1.620
VAPOR VISCOSITY (cP) 0.011 0.013 0.016 0.013 0.013
LIQUID MASS FLOW RATE (kg/h) 760,003.4 760,003.4 760,003.4 596,170.8 10,905.5 596,168.9
LIQUID FLOW @ PRES & TEMP (m³/h) 790.3 862.8 858.8 628.0 11.0 611.7
LIQUID MOLECULAR WEIGHT 19.08 19.08 19.84 18.09 18.02 18.09
LIQUID DEN @ PRESS &TEMP (kg/m³) 962 881 885 949 987 975
LIQUID VISCOSITY (cP) 0.423 0.177 0.148 0.247 0.600 0.389
COMPOSITION (WT.%)
ETHYLENE 0.56 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
OXYGEN 0.02 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
ETHYLENE OXIDE 91.75 8.87 0.00 8.87 0.00 0.00 0.00 0.00 0.00 0.00 0.00
CARBON DIOXIDE 2.79 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
WATER 4.73 90.65 99.76 90.65 87.20 99.74 99.39 99.96 99.76 98.96 99.39
NITROGEN 0.00
ARGON 0.04
METHANE 0.07
ETHANE 0.00
MEG 0.00 0.48 0.24 0.48 11.78 0.04 0.61 0.04 0.24 0.00 0.61
DEG 0.96
TEG 0.06
PEG 0.01
FORMALDEHYDE
ACETALDEHYDE 0.03 0.22 0.00 0.00 0.00 1.03 0.00

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ SOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 65-SD-1053
DATE: 3/11/2016

STREAM NUMBER 505 506 509 510 511 513 514 515 516 517 518 521 530 531 532 533
STREAM DESCRIPTION GLYCOL 1ST EFFECT 2ND EFFECT 1ST EFFECT 2ND EFFECT ALDEHYDE ALDEHYDE 3RD EFFECT 2ND EFFECT 2ND EFFECT 3RD EFFECT 3RD EFFECT TREATED FIRST EFFECT 2ND EFFECT 3RD EFFECT
REACTOR OVERHEAD CONDENSATE BOTTOMS OVERHEAD STRIPPER STRIPPER REB. NON- REB. BOTTOMS OVERHEADS BOTTOMS WATER REFLUX REFLUX REFLUX
OUTLET OVERHEAD BOTTOMS CONDENSIBLE ALDEHYDE
VENT PURGE

MOLE FRACTION LIQUID 1.0 0.0 1.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 1.0 1.0 1.0 1.0 1.0
TEMPERATURE (°C) 195 201 200 202 191 190 190 190 200 193 181 183 93 93 93 93
PRESSURE (barg) 22.0 14.9 14.9 14.9 11.8 11.8 11.9 11.8 14.9 11.9 9.2 9.2 19.6 19.6 19.6 19.6
PHASE LIQUID VAPOR LIQUID LIQUID VAPOR VAPOR LIQUID VAPOR VAPOR LIQUID VAPOR LIQUID LIQUID LIQUID LIQUID LIQUID
VAPOR MASS FLOW RATE (kg/h) 65,245.4 76,885.2 12,352.3 500.0 1,000.0 87,034.5
VAPOR FLOW @ PRES & TEMP (m³/h) 8,382.8 12,123.9 1,947.5 78.9 128.2 17,099.7
VAPOR MOLECULAR WEIGHT 18.10 18.09 18.04 18.02 18.09 18.09
VAPOR DEN @ PRESS &TEMP (kg/m³) 7.783 6.342 6.343 6.334 7.801 5.090
VAPOR VISCOSITY (cP) 0.016 0.016 0.016 0.016 0.016 0.015
LIQUID MASS FLOW RATE (kg/h) 760,003.4 64,245.4 706,091.4 139,278.4 633,050.5 550,367.7 41,984.0 3,262.3 3,844.3 4,351.7
LIQUID FLOW @ PRES & TEMP (m³/h) 858.8 74.0 803.7 158.4 710.4 608.8 43.5 3.4 4.0 4.5
LIQUID MOLECULAR WEIGHT 19.84 18.10 20.18 18.09 20.45 20.87 18.55 18.55 18.55 18.55
LIQUID DEN @ PRESS &TEMP (kg/m³) 885 868 879 879 891 904 966 966 966 966
LIQUID VISCOSITY (cP) 0.148 0.131 0.145 0.138 0.155 0.168 0.314 0.314 0.314 0.314
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 87.20 99.37 99.38 85.11 99.43 99.74 99.42 99.95 99.34 83.44 99.40 81.02 95.97 95.97 95.97 95.97
NITROGEN
ARGON
METHANE
ETHANE
MEG 11.78 0.58 0.59 13.71 0.57 0.04 0.58 0.04 0.04 15.25 0.60 17.48 4.03 4.03 4.03 4.03
DEG 0.96 1.11 1.23 0.00 1.42
TEG 0.06 0.06 0.07 0.00 0.08
PEG 0.01 0.01 0.01 0.00 0.01
FORMALDEHYDE
ACETALDEHYDE 0.04 0.03 0.22 0.02 0.62

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ SOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 65-SD-1054
DATE: 3/11/2016

STREAM NUMBER 514 518 519 520 521 522 523 524 525 526 529 534 535 537 561
STREAM DESCRIPTION ALDEHYDE 3RD EFFECT 4TH EFFECT 4TH EFFECT 3RD EFFECT 4TH EFFECT 5TH EFFECT 5TH EFFECT 4TH EFFECT 5TH EFFECT 5TH EFFECT 4TH EFFECT 5TH EFFECT EXTRACTION EXTRACTION
STRIPPER OVERHEADS REB. NON- CONDENSATE BOTTOMS OVERHEADS REB. NON- CONDENSATE BOTTOMS OVERHEADS BOTTOMS REFLUX REFLUX STEAM TO STEAM TO
BOTTOMS CONDENSIBLE CONDENSIBLE 6TH EFFECT E-6522
VENT VENT REBOILER

MOLE FRACTION LIQUID 1.0 0.0 0.0 1.0 1.0 0.0 0.0 1.0 1.0 0.0 1.0 1.0 1.0 0.0 0.0
TEMPERATURE (°C) 190 181 180 180 183 171 169 169 173 159 162 93 93 159 159
PRESSURE (barg) 11.9 9.2 9.2 9.2 9.2 6.9 6.9 6.9 7.0 4.9 4.9 19.6 19.6 4.9 4.9
PHASE LIQUID VAPOR VAPOR LIQUID LIQUID VAPOR VAPOR LIQUID LIQUID VAPOR LIQUID LIQUID LIQUID VAPOR VAPOR
VAPOR MASS FLOW RATE (kg/h) 87,034.5 500.0 98,041.0 500.0 109,314.0 87,414.2 21,899.8
VAPOR FLOW @ PRES & TEMP (m³/h) 17,099.7 98.3 24,370.6 124.4 35,924.6 28,727.5 7,197.2
VAPOR MOLECULAR WEIGHT 18.09 18.02 18.09 18.02 18.10 18.10 18.10
VAPOR DEN @ PRESS &TEMP (kg/m³) 5.090 5.084 4.023 4.019 3.043 3.043 3.043
VAPOR VISCOSITY (cP) 0.015 0.015 0.015 0.015 0.015 0.015 0.015
LIQUID MASS FLOW RATE (kg/h) 139,278.4 225,812.9 550,367.7 323,354.0 457,228.8 353,380.5 4,902.1 5,465.7
LIQUID FLOW @ PRES & TEMP (m³/h) 158.4 253.5 608.8 358.7 498.2 378.3 5.1 5.7
LIQUID MOLECULAR WEIGHT 18.09 18.09 20.87 18.09 21.54 22.83 18.55 18.55
LIQUID DEN @ PRESS &TEMP (kg/m³) 879 891 904 901 918 934 966 966
LIQUID VISCOSITY (cP) 0.138 0.148 0.168 0.157 0.185 0.212 0.314 0.314
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 99.42 99.40 99.96 99.41 81.02 99.38 99.97 99.40 77.24 99.32 70.70 95.97 95.97 99.32 99.32
NITROGEN
ARGON
METHANE
ETHANE
MEG 0.58 0.60 0.03 0.59 17.48 0.62 0.03 0.60 20.95 0.68 26.96 4.03 4.03 0.68 0.68
DEG 1.42 1.71 0.00 2.21
TEG 0.08 0.09 0.00 0.12
PEG 0.01 0.01 0.00 0.01
FORMALDEHYDE
ACETALDEHYDE 0.00 0.00

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ SOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 65-SD-1055
DATE: 3/11/2016

STREAM NUMBER 503 524 529 537 546 552 562 563 564 565 566 567 568 569 570 571 572 573 576
STREAM DESCRIPTION EXTRACTION 5TH EFFECT 5TH EFFECT EXTRACTION EXTRACTION EXTRACTION 6TH EFFECT 6TH EFFECT 6TH EFFECT 7TH EFFECT 7TH EFFECT 7TH EFFECT 6TH EFFECT 7TH EFFECT EXTRACTION 6TH EFFECT 7TH EFFECT EXTRACTION EXTRACTION
STEAM TO CONDENSATE BOTTOMS STEAM TO STEAM TO STEAM TO CONDENSATE OVERHEADS BOTTOMS CONDENSATE OVERHEADS BOTTOMS REFLUX REFLUX STEAM TO REB. NON- REB. NON- STEAM TO STEAM TO
GLYCOL FEED 6TH EFFECT STRIPPING E-6521 8TH EFFECT CONDENSIBLE CONDENSIBLE E-6223 7TH EFFECT
STRIPPER REBOILER COLUMN REBOILER VENT VENT REBOILER

MOLE FRACTION LIQUID 0.0 1.0 1.0 0.0 0.0 0.0 1.0 0.0 1.0 1.0 0.0 1.0 1.0 1.0 0.0 0.0 0.0 0.0 0.0
TEMPERATURE (°C) 123 169 162 159 123 123 158 146 150 144 123 133 93 93 123 158 144 146 146
PRESSURE (barg) 1.2 6.9 4.9 4.9 1.2 1.2 4.9 3.1 3.1 3.1 1.2 1.2 19.6 19.6 1.2 4.9 3.1 3.1 3.1
PHASE VAPOR LIQUID LIQUID VAPOR VAPOR VAPOR LIQUID VAPOR LIQUID LIQUID VAPOR LIQUID LIQUID LIQUID VAPOR VAPOR VAPOR VAPOR VAPOR
VAPOR MASS FLOW RATE (kg/h) 13,421.3 87,414.2 14,635.3 18,658.6 100,323.5 92,736.0 46,020.8 500.0 500.0 23,000.0 77,323.5
VAPOR FLOW @ PRES & TEMP (m³/h) 11,129.9 28,727.5 12,136.7 15,473.1 46,734.1 76,900.1 38,162.1 164.4 233.0 10,714.2 36,019.9
VAPOR MOLECULAR WEIGHT 18.05 18.10 18.05 18.05 18.12 18.05 18.05 18.02 18.02 18.12 18.12
VAPOR DEN @ PRESS &TEMP (kg/m³) 1.206 3.043 1.206 1.206 2.147 1.206 1.206 3.041 2.146 2.147 2.147
VAPOR VISCOSITY (cP) 0.013 0.015 0.013 0.013 0.014 0.013 0.013 0.014 0.014 0.014 0.014
LIQUID MASS FLOW RATE (kg/h) 323,354.0 353,380.5 410,268.2 258,073.2 487,091.6 180,479.0 5,016.2 15,141.9
LIQUID FLOW @ PRES & TEMP (m³/h) 358.7 378.3 449.4 270.3 526.1 183.1 5.2 15.7
LIQUID MOLECULAR WEIGHT 18.09 22.83 18.10 25.27 18.10 30.64 18.55 18.55
LIQUID DEN @ PRESS &TEMP (kg/m³) 901 934 913 955 926 986 966 966
LIQUID VISCOSITY (cP) 0.157 0.212 0.171 0.262 0.190 0.389 0.314 0.314
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 99.76 99.40 70.70 99.32 99.76 99.76 99.38 99.19 60.12 99.35 99.76 42.75 95.97 95.97 99.76 99.97 99.97 99.19 99.19
NITROGEN
ARGON
METHANE
ETHANE
MEG 0.24 0.60 26.96 0.68 0.24 0.24 0.62 0.81 36.68 0.65 0.24 52.66 4.03 4.03 0.24 0.03 0.02 0.81 0.81
DEG 2.21 3.03 0.00 4.33
TEG 0.12 0.16 0.00 0.23
PEG 0.01 0.02 0.00 0.02
FORMALDEHYDE
ACETALDEHYDE 0.00 0.00

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ SOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 65-SD-1056
DATE: 3/11/2016

STREAM NUMBER 527 528 540 541 542 545 548 549 550 551 567 570
STREAM DESCRIPTION 8TH EFFECT EVAPORATOR 8TH EFFECT 8TH EFFECT 8TH EFFECT CRUDE EVAPORATOR 8TH EFFECT EVAP. EVAP. 7TH EFFECT EXTRACTION
REB. NON- CONDENSATE OVERHEAD CONDENSER CONDENSER GLYCOL HOTWELL REFLUX HOTWELL TO HOTWELL TO BOTTOMS STEAM TO
CONDENSIBLE VENT CONDENSATE CONDENSATE DRYING COL. RECYCLE 8TH EFFECT
VENT REFLUX WATER TANK REBOILER

MOLE FRACTION LIQUID 0.0 1.0 0.0 0.0 1.0 1.0 1.0 1.0 1.0 1.0 0.0
TEMPERATURE (°C) 113 113 59 45 45 91 45 45 45 133 123
PRESSURE (barg) 0.6 4.4 140 mm Hg 140 mm Hg 0.1 7.4 5.4 5.4 5.4 1.2 1.2
PHASE VAPOR LIQUID VAPOR VAPOR LIQUID LIQUID LIQUID LIQUID LIQUID LIQUID VAPOR
VAPOR MASS FLOW RATE (kg/h) 500.0 87,667.8 129.4 46,020.8
VAPOR FLOW @ PRES & TEMP (m³/h) 552.2 716,673.4 970.9 38,162.1
VAPOR MOLECULAR WEIGHT 18.02 18.02 22.02 18.05
VAPOR DEN @ PRESS &TEMP (kg/m³) 0.905 0.122 0.133 1.206
VAPOR VISCOSITY (cP) 0.013 0.010 0.014 0.013
LIQUID MASS FLOW RATE (kg/h) 596,170.8 87,538.4 114,793.2 87,538.4 21,916.0 65,622.4 180,479.0
LIQUID FLOW @ PRES & TEMP (m³/h) 628.0 88.7 109.1 88.7 22.2 66.5 183.1
LIQUID MOLECULAR WEIGHT 18.09 18.02 51.13 18.02 18.02 18.02 30.64
LIQUID DEN @ PRESS &TEMP (kg/m³) 949 987 1,052 987 987 987 986
LIQUID VISCOSITY (cP) 0.247 0.600 1.579 0.598 0.598 0.598 0.389
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 100.00 99.39 99.92 49.05 100.00 10.00 100.00 100.00 100.00 42.75 99.76
NITROGEN 0.08 50.95
ARGON
METHANE
ETHANE
MEG 0.61 82.79 52.66 0.24
DEG 6.81 4.33
TEG 0.37 0.23
PEG 0.03 0.02
FORMALDEHYDE
ACETALDEHYDE 0.00

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ SOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 66-SD-1061
DATE: 3/11/2016

STREAM NUMBER 601 602 603 604 613 616 617

STREAM DESCRIPTION DRYING DRYING DRYING DRYING VAPOR TO DRYING DRYING
COLUMN COLUMN COLUMN COLUMN EJ-6612 COLUMN COLUMN
OVERHEADS BOTTOMS REFLUX CONDENSATE CONDENSER HOTWELL
TO WASTE CONDENSATE LIQUID

MOLE FRACTION LIQUID 0.0 1.0 1.0 1.0 0.0 1.0 1.0
TEMPERATURE (°C) 59 163 45 45 45 45 45
PRESSURE (barg) 140 mm Hg 5.0 5.4 4.6 105 mm Hg 0.1 4.6
PHASE VAPOR LIQUID LIQUID LIQUID VAPOR LIQUID LIQUID
VAPOR MASS FLOW RATE (kg/h) 19,669.4 271.4
VAPOR FLOW @ PRES & TEMP (m³/h) 160,494.5 2,483.7
VAPOR MOLECULAR WEIGHT 18.05 21.03
VAPOR DEN @ PRESS &TEMP (kg/m³) 0.123 0.109
VAPOR VISCOSITY (cP) 0.010 0.013
LIQUID MASS FLOW RATE (kg/h) 103,316.0 8,083.3 14,519.1 22,398.0 22,602.4
LIQUID FLOW @ PRES & TEMP (m³/h) 103.1 8.2 14.7 22.7 22.9
LIQUID MOLECULAR WEIGHT 64.26 18.02 18.02 18.02 18.02
LIQUID DEN @ PRESS &TEMP (kg/m³) 1,002 987 987 987 987
LIQUID VISCOSITY (cP) 1.003 0.598 0.598 0.600 0.600
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 99.44 0.00 99.99 99.99 59.82 99.99 99.99
NITROGEN 0.55 0.00 0.00 0.00 40.14 0.00 0.00
ARGON
METHANE
ETHANE
MEG 0.00 91.99 0.01 0.01 0.00 0.01 0.01
DEG 0.00 7.56 0.00 0.00 0.00 0.00 0.00
TEG 0.00 0.41 0.00 0.00 0.00 0.00 0.00
PEG 0.00 0.04 0.00 0.00 0.00 0.00 0.00
FORMALDEHYDE 0.00 0.00 0.00 0.00 0.00 0.00 0.00
ACETALDEHYDE 0.00 0.00 0.00 0.00 0.04 0.00 0.00

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ SOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 66-SD-1062
DATE: 9/7/2016
(R-3)
STREAM NUMBER 605 606 607 608 618 619 624
STREAM DESCRIPTION MEG COLUMN MEG COLUMN MEG COLUMN MEG MEG COLUMN MEG COLUMN MEG COLUMN
OVERHEADS BOTTOMS VAPOR PRODUCT TO CONDENSER CONDENSER REFLUX
DISTILLATE CRUDE STEAM BLOWDOWN
GLYCOL
HEATER
MOLE FRACTION LIQUID 0.0 1.0 0.0 1.0 0.0 1.0 1.0
TEMPERATURE (°C) 143 170 135 144 121 121 135
PRESSURE (barg) 110 mm Hg 5.1 85 mm Hg 4.5 1.0 9.2 5.8
PHASE VAPOR LIQUID VAPOR LIQUID VAPOR LIQUID LIQUID
VAPOR MASS FLOW RATE (kg/h) 145,785.5 4,944.2 60,632.1
VAPOR FLOW @ PRES & TEMP (m³/h) 552,165.5 24,876.4 55,022.3
VAPOR MOLECULAR WEIGHT 61.97 59.27 18.06
VAPOR DEN @ PRESS &TEMP (kg/m³) 0.264 0.199 1.102
VAPOR VISCOSITY (cP) 0.012 0.012 0.013
LIQUID MASS FLOW RATE (kg/h) 11,063.7 87,500.0 12,451.8 140,841.3
LIQUID FLOW @ PRES & TEMP (m³/h) 11.0 85.9 13.1 137.2
LIQUID MOLECULAR WEIGHT 90.98 62.07 19.40 62.07
LIQUID DEN @ PRESS &TEMP (kg/m³) 1,002 1,018 952 1,026
LIQUID VISCOSITY (cP) 1.063 1.188 0.250 1.307
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 0.00 0.00 0.00 0.00 99.67 89.96
NITROGEN 0.13 0.00 3.88 0.00 0.00 0.00
ARGON
METHANE
ETHANE
MEG 99.87 25.24 96.12 99.98 0.31 10.00 100.00
DEG 0.00 70.61 0.00 0.02 0.00 0.00 0.00
TEG 0.00 3.80 0.00 0.00 0.00 0.00 0.00
PEG 0.00 0.35 0.00 0.00 0.00 0.00 0.00
FORMALDEHYDE 0.00 0.00 0.00 0.00 0.02 0.04 0.00
ACETALDEHYDE 0.00 0.00 0.00 0.00 0.00 0.00 0.00

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ SOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 66-SD-1063
DATE: 3/11/2016

STREAM NUMBER 608 627

STREAM DESCRIPTION MEG MEG PRODUCT
PRODUCT TO (PUMP-OUT
CRUDE RATE)
GLYCOL
HEATER
MOLE FRACTION LIQUID 1.0 1.0
TEMPERATURE (°C) 144 48
PRESSURE (barg) 4.5 7.7
PHASE LIQUID LIQUID
VAPOR MASS FLOW RATE (kg/h)
VAPOR FLOW @ PRES & TEMP (m³/h)
VAPOR MOLECULAR WEIGHT
VAPOR DEN @ PRESS &TEMP (kg/m³)
VAPOR VISCOSITY (cP)
LIQUID MASS FLOW RATE (kg/h) 87,500.0 264,700.0
LIQUID FLOW @ PRES & TEMP (m³/h) 85.92 242.0
LIQUID MOLECULAR WEIGHT 62.07 62.07
LIQUID DEN @ PRESS &TEMP (kg/m³) 1018.39 1,093
LIQUID VISCOSITY (cP) 1.19 7.010
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 0.00 0.00
NITROGEN
ARGON
METHANE
ETHANE
MEG 99.98 99.98
DEG 0.02 0.02
TEG 0.00 0.00
PEG 0.00 0.00
FORMALDEHYDE 0.00 0.00
ACETALDEHYDE

TOTAL (WT.%) 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ SOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 66-SD-1064
DATE: 3/11/2016

STREAM NUMBER 609 610 615 622 625

STREAM DESCRIPTION MEG COLUMN MEG COLUMN MEG COLUMN MEG COLUMN MEG COLUMN
PRE- VACUUM PUMP VACUUM PUMP LIGHTS VACUUM PUMP
CONDENSATE BLEED BLEED RECYCLE VENT

MOLE FRACTION LIQUID 1.0 1.0 1.0 0.0

TEMPERATURE (°C) 45 45 66 45
PRESSURE (barg) 0.1 0.1 19.0 0.1
PHASE LIQUID LIQUID LIQUID VAPOR
VAPOR MASS FLOW RATE (kg/h) 192.3
VAPOR FLOW @ PRES & TEMP (m³/h) 164.7
VAPOR MOLECULAR WEIGHT 28.04
VAPOR DEN @ PRESS &TEMP (kg/m³) 1.168
VAPOR VISCOSITY (cP) 0.019
LIQUID MASS FLOW RATE (kg/h) 4,744.7 6.2 8,071.4
LIQUID FLOW @ PRES & TEMP (m³/h) 4.3 0.0 7.5
LIQUID MOLECULAR WEIGHT 62.07 62.05 63.81
LIQUID DEN @ PRESS &TEMP (kg/m³) 1,097 1,097 1,081
LIQUID VISCOSITY (cP) 7.734 7.728 4.267
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 0.00 0.00 0.00 0.00
NITROGEN 0.00 0.01 0.00 99.81
ARGON
METHANE
ETHANE
MEG 100.00 99.98 93.43 0.19
DEG 0.00 0.00 6.55 0.00
TEG 0.00 0.00 0.02 0.00
PEG 0.00 0.00 0.00 0.00
FORMALDEHYDE 0.00 0.00 0.00 0.00
ACETALDEHYDE

TOTAL (WT.%) 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ SOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 66-SD-1065
DATE: 3/11/2016

STREAM NUMBER 611 612 614 620 621 626

STREAM DESCRIPTION MEG MEG SPLITTER MEG SPLITTER MEG SPLITTER EJ-6632A MEG SPLITTER
SPLITTER BOTTOMS VENT TO VACUUM PUMP AFTERSTAGE VACUUM PUMP
SIDEDRAW EJ-6632 BLEED CONDENSATE VENT

MOLE FRACTION LIQUID 1.0 1.0 0.0 1.0 0.0

TEMPERATURE (°C) 92 175 50 45 45
PRESSURE (barg) 0.1 5.1 7 mm Hg 0.1 0.1
PHASE LIQUID LIQUID VAPOR LIQUID VAPOR
VAPOR MASS FLOW RATE (kg/h) 67.6 100.2
VAPOR FLOW @ PRES & TEMP (m³/h) 5,954.7 85.8
VAPOR MOLECULAR WEIGHT 32.69 28.04
VAPOR DEN @ PRESS &TEMP (kg/m³) 0.011 1.168
VAPOR VISCOSITY (cP) 0.017 0.019
LIQUID MASS FLOW RATE (kg/h) 3,303.6 7,744.3 16.9
LIQUID FLOW @ PRES & TEMP (m³/h) 3.1 7.7 0.0
LIQUID MOLECULAR WEIGHT 66.50 108.07 62.12
LIQUID DEN @ PRESS &TEMP (kg/m³) 1,062 1,000 1,097
LIQUID VISCOSITY (cP) 2.513 1.091 7.735
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 0.00 0.00 0.00 0.00 0.00
NITROGEN 0.00 0.00 73.95 0.01 99.81
ARGON
METHANE
ETHANE
MEG 83.96 0.02 25.99 99.76 0.19
DEG 16.00 94.07 0.06 0.23 0.00
TEG 0.04 5.41 0.00 0.00 0.00
PEG 0.00 0.50 0.00 0.00 0.00
FORMALDEHYDE
ACETALDEHYDE

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ SOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 67-SD-1071
DATE: 3/11/2016

STREAM NUMBER 701 704 705 706 709 711 714 715 716
STREAM DESCRIPTION DEG DEG COLUMN DEG COLUMN DEG/TEG DEG DEG/TEG DEG/TEG DEG DEG PRODUCT
PRODUCT CATCHPAN BOTTOMS EJECTOR CONDENSER COLUMN COLUMN HOTWELL (PUMP-OUT
PURGE INTER- VENT VACUUM PUMP VAUUM PUMP CONDENSATE RATE)
CONDENSATE BLEED VENT

MOLE FRACTION LIQUID 1.0 1.0 1.0 0.0 1.0 0.0 1.0 1.0
TEMPERATURE (°C) 48 128 177 50 45 45 45 48
PRESSURE (barg) 4.8 0.1 5.8 7 mm Hg 0.1 0.1 0.1 5.9
PHASE LIQUID LIQUID LIQUID VAPOR LIQUID VAPOR LIQUID LIQUID
VAPOR MASS FLOW RATE (kg/h) 84.0 194.2
VAPOR FLOW @ PRES & TEMP (m³/h) 5,888.7 166.4
VAPOR MOLECULAR WEIGHT 28.73 28.03
VAPOR DEN @ PRESS &TEMP (kg/m³) 0.014 1.167
VAPOR VISCOSITY (cP) 0.019 0.019
LIQUID MASS FLOW RATE (kg/h) 7,228.7 53.2 508.7 2.8 4.3 82,471.1
LIQUID FLOW @ PRES & TEMP (m³/h) 6.6 0.1 0.5 0.0 0.0 75.0
LIQUID MOLECULAR WEIGHT 106.12 105.18 152.60 90.96 84.56 106.12
LIQUID DEN @ PRESS &TEMP (kg/m³) 1,100 1,038 1,013 1,100 1,100 1,100
LIQUID VISCOSITY (cP) 11.866 1.761 1.245 11.161 10.366 11.866
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 0.00 0.00 0.00 0.00 0.01 0.00 0.01 0.00
NITROGEN 0.00 0.00 0.00 96.48 0.03 99.92 0.02 0.00
ARGON
METHANE
ETHANE
MEG 0.01 1.26 0.00 0.45 23.56 0.06 36.81 0.01
DEG 99.99 98.74 0.35 3.07 75.87 0.02 60.77 99.99
TEG 0.00 0.00 92.01 0.00 0.54 0.00 2.39 0.00
PEG 0.00 0.00 7.64 0.00 0.00 0.00 0.00 0.00
FORMALDEHYDE
ACETALDEHYDE

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ SOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 67-SD-1072
DATE: 3/11/2016

STREAM NUMBER 702 707 708 710 717

STREAM DESCRIPTION TEG TEG COLUMN TEG COLUMN TEG TEG PRODUCT
PRODUCT BOTTOMS TO CATCHPAN CONDENSER (PUMP-OUT
OSBL VENT RATE)
INCINERATOR

MOLE FRACTION LIQUID 1.0 1.0 1.0 0.0 1.0

TEMPERATURE (°C) 48 86 146 50 48
PRESSURE (barg) 3.4 5.5 0.1 7 mm Hg 5.9
PHASE LIQUID LIQUID LIQUID VAPOR LIQUID
VAPOR MASS FLOW RATE (kg/h) 16.1
VAPOR FLOW @ PRES & TEMP (m³/h) 1,152.9
VAPOR MOLECULAR WEIGHT 28.19
VAPOR DEN @ PRESS &TEMP (kg/m³) 0.014
VAPOR VISCOSITY (cP) 0.019
LIQUID MASS FLOW RATE (kg/h) 379.9 77.8 50.9 15,529.9
LIQUID FLOW @ PRES & TEMP (m³/h) 0.3 0.1 0.0 14.0
LIQUID MOLECULAR WEIGHT 150.15 169.38 148.19 150.15
LIQUID DEN @ PRESS &TEMP (kg/m³) 1,109 1,082 1,037 1,109
LIQUID VISCOSITY (cP) 14.370 4.604 1.686 14.370
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER
NITROGEN 0.00 0.00 0.00 99.22 0.00
ARGON
METHANE
ETHANE
MEG 0.00 0.00 0.00 0.00 0.00
DEG 0.03 0.00 3.22 0.14 0.03
TEG 99.97 50.00 96.78 0.63 99.97
PEG 0.00 50.00 0.00 0.00 0.00
FORMALDEHYDE
ACETALDEHYDE

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ SOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 69-SD-1093
DATE: 3/11/2016

STREAM NUMBER 315 538 539 604 715 901 902

STREAM DESCRIPTION RECLAIM TREATING UNIT ALDEHYDE DRYING DEG WASTE WASTE
COMP'R WASTE WATER PURGE COLUMN HOTWELL WATER TO WATER TO
KO DRUM CONDENSATE CONDENSATE OSBL OSBL
COND TO WASTE

MOLE FRACTION LIQUID 1.0 1.0 1.0 1.0 1.0 1.0 1.0
TEMPERATURE (°C) 45.0 60 45 45 45 45 60
PRESSURE (barg) 3.0 3.9 2.1 4.6 0.1 8.0 8.0
PHASE LIQUID LIQUID LIQUID LIQUID LIQUID LIQUID LIQUID
VAPOR MASS FLOW RATE (kg/h)
VAPOR FLOW @ PRES & TEMP (m³/h)
VAPOR MOLECULAR WEIGHT
VAPOR DEN @ PRESS &TEMP (kg/m³)
VAPOR VISCOSITY (cP)
LIQUID MASS FLOW RATE (kg/h) 1,991.6 23,650.5 10,905.5 14,519.1 4.3 27,420.4 23,650.5
LIQUID FLOW @ PRES & TEMP (m³/h) 2.0 24.1 11.0 14.7 0.0 27.7 24.1
LIQUID MOLECULAR WEIGHT 18.02 18.10 18.02 18.02 84.56 18.03 18.10
LIQUID DEN @ PRESS &TEMP (kg/m³) 988 982 987 987 1100 990 983
LIQUID VISCOSITY (cP) 0.641 0.463 0.600 0.598 10.366 0.598 0.466
COMPOSITION (WT.%)
ETHYLENE 0.00
OXYGEN 0.00
ETHYLENE OXIDE 0.00
CARBON DIOXIDE 0.04
WATER 99.95 99.86 99.96 99.99 0.01 99.96 99.86
NITROGEN 0.00 0.00 0.00 0.00 0.02 0.00 0.00
ARGON 0.00
METHANE 0.00
ETHANE 0.00
MEG 0.00 0.14 0.04 0.01 36.81 0.03 0.14
DEG 0.00 0.00 0.00 0.00 60.77 0.01 0.00
TEG 0.00 0.00 0.00 0.00 2.39 0.00 0.00
PEG 0.00 0.00 0.00 0.00 0.00 0.00 0.00
FORMALDEHYDE 0.00 0.00 0.00 0.00 0.00 0.00 0.00
ACETALDEHYDE 0.00 0.00 0.00 0.00 0.00 0.00 0.00

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 61-SD-1011
DATE: 9/7/2016
(R-3) (R-3) (R-3)
STREAM NUMBER 101 102 103 104 105 106 107 108 109
STREAM DESCRIPTION ETHYLENE OXYGEN METHANE TOTAL FEED TO FEED TO REACTOR REACTOR TOTAL
FEED FEED BALLAST REACTOR REACTOR REACTOR R-6110 R-6120 REACTOR
FEED R-6110 R-6120 OUTLET OUTLET OUTLET

MOLE FRACTION LIQUID 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
TEMPERATURE (°C) 35 35 35 57 57 57 89 89 89
PRESSURE (barg) 40.0 27.0 21.0 21.0 21.0 21.0 18.9 18.9 18.9
PHASE VAPOR VAPOR VAPOR VAPOR VAPOR VAPOR VAPOR VAPOR VAPOR
VAPOR MASS FLOW RATE (kg/h) 51,070.0 49,491.5 163.4 1,750,490.5 875,245.2 875,245.2 875,245.2 875,245.2 1,750,490.5
VAPOR FLOW @ PRES & TEMP (m³/h) 854.9 1,392.8 11.5 84,683.7 42,341.9 42,341.9 51,334.8 51,334.8 102,669.6
VAPOR MOLECULAR WEIGHT 28.05 32.01 16.04 24.75 24.75 24.75 25.02 25.02 25.02
VAPOR DEN @ PRESS &TEMP (kg/m³) 59.741 35.533 14.256 20.671 20.671 20.671 17.050 17.050 17.050
VAPOR VISCOSITY (cP) 0.010 0.021 0.011 0.015 0.015 0.015 0.015 0.015 0.015
LIQUID MASS FLOW RATE (kg/h)
LIQUID FLOW @ PRES & TEMP (m³/h)
LIQUID MOLECULAR WEIGHT
LIQUID DEN @ PRESS &TEMP (kg/m³)
LIQUID VISCOSITY (cP)
COMPOSITION (WT.%)
ETHYLENE 99.92 39.68 39.68 39.68 36.78 36.78 36.78
OXYGEN 99.75 10.35 10.35 10.35 7.53 7.53 7.53
ETHYLENE OXIDE 0.00 0.00 0.00 3.92 3.92 3.92
CARBON DIOXIDE 1.78 1.78 1.78 3.06 3.06 3.06
WATER 0.35 0.35 0.35 0.87 0.87 0.87
NITROGEN 0.00 0.34 0.34 0.34 0.34 0.34 0.34
ARGON 0.24 18.89 18.89 18.89 18.89 18.89 18.89
METHANE 0.03 100.00 27.76 27.76 27.76 27.76 27.76 27.76
ETHANE 0.05 0.86 0.86 0.86 0.86 0.86 0.86
MEG 0.00 0.00 0.00 0.00 0.00 0.00
DEG
TEG
PEG
FORMALDEHYDE 0.00 0.00 0.00 0.00 0.00 0.00
ACETALDEHYDE 0.00 0.00 0.00 0.00 0.00 0.00
K2CO3
KHCO3
TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 61-SD-1012
DATE: 3/11/2016

STREAM NUMBER 110 111 112 113 114 115 116 117 118 119 120 121
STREAM DESCRIPTION RICH CYCLE WASH TOWER LEAN CYCLE CYCLE GAS RICH WASH WATER PRE- WASH WATER WASH WATER SCRUBBER CONTACTOR CONTACTOR
WATER OVERHEAD GAS TO PURGE CARBONATE FROM SATURATOR PURGE TO OVERHEADS FEED GAS OVERHEADS
RECYCLE SOLUTION CARBONATE BOTTOMS CARBONATE
COMPRESSOR KO DRUM KO DRUM

MOLE FRACTION LIQUID 1.0 0.0 0.0 0.0 1.0 1.0 1.0 1.0 1.0 0.0 0.0 0.0
TEMPERATURE (°C) 59 45 45 45 106 71 48 49 43 34 68 83
PRESSURE (barg) 18.1 18.5 18.4 18.5 17.5 18.5 18.6 28.7 27.7 18.6 18.6 18.5
PHASE LIQUID VAPOR VAPOR VAPOR LIQUID LIQUID LIQUID LIQUID LIQUID VAPOR VAPOR VAPOR
VAPOR MASS FLOW RATE (kg/h) 1,650,529.7 1,649,929.0 601.1 1,667,711.4 1,687,347.1 1,673,349.4
VAPOR FLOW @ PRES & TEMP (m³/h) 87,579.9 88,005.7 31.9 83,727.5 96,052.3 101,165.7
VAPOR MOLECULAR WEIGHT 24.49 24.49 24.49 24.65 24.57 24.36
VAPOR DEN @ PRESS &TEMP (kg/m³) 18.846 18.748 18.846 19.918 17.567 16.541
VAPOR VISCOSITY (cP) 0.014 0.014 0.014 0.014 0.015 0.015
LIQUID MASS FLOW RATE (kg/h) 2,132,642.2 2,229,324.5 1,434,363.6 1,419,204.0 7,660.0 1,411,544.0
LIQUID FLOW @ PRES & TEMP (m³/h) 2,188.4 1,818.2 1,470.9 1,439.5 7.8 1,428.5
LIQUID MOLECULAR WEIGHT 18.62 23.18 18.02 18.02 18.02 18.02
LIQUID DEN @ PRESS &TEMP (kg/m³) 975 1,226 975 986 986 988
LIQUID VISCOSITY (cP) 0.480 0.619 0.398 0.565 0.562 0.622
COMPOSITION (WT.%)
ETHYLENE 0.05 39.01 39.01 39.01 0.02 0.03 0.05 0.05 0.05 38.54 38.17 38.46
OXYGEN 0.00 7.98 7.98 7.98 0.00 0.00 0.00 0.00 0.00 7.90 7.81 7.87
ETHYLENE OXIDE 3.21 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
CARBON DIOXIDE 0.03 1.89 1.89 1.89 0.01 0.03 0.03 0.03 3.17 3.24 1.85
WATER 94.83 0.37 0.37 0.37 72.82 99.92 99.89 99.88 99.89 0.20 1.12 1.76
NITROGEN 0.00 0.36 0.36 0.36 0.00 0.00 0.00 0.00 0.00 0.36 0.35 0.36
ARGON 0.01 20.03 20.03 20.03 0.00 0.01 0.01 0.01 0.01 19.81 19.60 19.76
METHANE 0.01 29.45 29.45 29.45 0.00 0.01 0.01 0.01 0.01 29.12 28.81 29.05
ETHANE 0.00 0.91 0.91 0.91 0.00 0.00 0.00 0.00 0.00 0.90 0.89 0.90
MEG 1.82 0.00 0.00 0.00 2.98 0.01 0.01 0.01 0.01 0.00 0.00 0.00
DEG
TEG
PEG
FORMALDEHYDE 0.03 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
ACETALDEHYDE 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
K2CO3 6.96
KHCO3 17.21
TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 62-SD-1021
DATE: 3/11/2016

STREAM NUMBER 201 202 203 204 205 206 207 208
STREAM DESCRIPTION TOTAL REGEN LEAN REGEN REGEN. PRE- REGEN. PRE- TOTAL REGEN. REGEN.
FEED FLASH CARBONATE OVERHEAD CONDENSER CONDENSER REGEN. FEED CONDENSER CONDENSER
LIQUID SOLUTION VAPOR COND. FLASH VAPOR VENT COND.

MOLE FRACTION LIQUID 1.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0
TEMPERATURE (°C) 106 114 105 89 89 106 60 60
PRESSURE (barg) 0.67 31.7 0.41 0.30 0.30 0.67 0.2 0.2
PHASE LIQUID LIQUID VAPOR VAPOR LIQUID VAPOR VAPOR LIQUID
VAPOR MASS FLOW RATE (kg/h) 37,811.9 31,811.9 3,871.9 24,600.4
VAPOR FLOW @ PRES & TEMP (m³/h) 29,983.5 23,514.1 2,913.5 14,450.1
VAPOR MOLECULAR WEIGHT 27.70 30.80 24.66 38.89
VAPOR DEN @ PRESS &TEMP (kg/m³) 1.261 1.353 1.329 1.702
VAPOR VISCOSITY (cP) 0.016 0.017 0.016 0.016
LIQUID MASS FLOW RATE (kg/h) 2,233,275.9 2,215,326.9 6,000.0 7,211.5
LIQUID FLOW @ PRES & TEMP (m³/h) 1,821.7 1,819.5 6.2 7.4
LIQUID MOLECULAR WEIGHT 23.15 22.91 18.05 18.02
LIQUID DEN @ PRESS &TEMP (kg/m³) 1,226 1,218 965 981
LIQUID VISCOSITY (cP) 0.620 0.579 0.316 0.466
COMPOSITION (WT.%)
ETHYLENE 0.00 0.00 0.01 0.01 0.00 12.60 0.01
OXYGEN 0.37
ETHYLENE OXIDE
CARBON DIOXIDE 0.00 59.12 70.27 0.00 37.80 90.87
WATER 72.99 74.19 40.82 29.71 99.73 42.53 9.12 99.96
NITROGEN 0.01
ARGON 1.09
METHANE 5.56
ETHANE 0.04
MEG 2.98 3.00 0.05 0.01 0.27 0.00 0.04
DEG
TEG
PEG
FORMALDEHYDE
ACETALDEHYDE
K2CO3 7.15 10.38
KHCO3 16.88 12.43
TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 63-SD-1031
DATE: 3/11/2016

STREAM NUMBER 301 302 303 304 305 306 307 308
STREAM DESCRIPTION STRIPPING STRIPPING STRIPPING MEG COL. CYCLE WATER LEAN CYLE STRIPPING REABSORBER
COLUMN COLUMN COLUMN CONDENSER BLEED WATER COLUMN FEED
OVERHEADS BOTTOMS BOTTOMS TO E- FEED REFLUX
6312

MOLE FRACTION LIQUID 0.0 1.0 1.0 1.0 1.0 1.0 1.0 0.0
TEMPERATURE (°C) 95 105 105 105 105 33 60 59
PRESSURE (barg) 0.6 0.2 10.0 10.0 9.0 18.0 6.0 0.5
PHASE VAPOR LIQUID LIQUID LIQUID LIQUID LIQUID LIQUID VAPOR
VAPOR MASS FLOW RATE (kg/h) 106,455.0 73,628.4
VAPOR FLOW @ PRES & TEMP (m³/h) 65,933.5 32,935.3
VAPOR MOLECULAR WEIGHT 30.33 40.26
VAPOR DEN @ PRESS &TEMP (kg/m³) 1.615 2.236
VAPOR VISCOSITY (cP) 0.012 0.011
LIQUID MASS FLOW RATE (kg/h) 2,149,449.5 2,049,934.2 72,473.3 27,089.7 2,049,863.2 41,826.6
LIQUID FLOW @ PRES & TEMP (m³/h) 2,248.4 2,144.7 75.8 28.3 2,062.2 43.5
LIQUID MOLECULAR WEIGHT 18.26 18.26 18.26 18.26 18.26 19.19
LIQUID DEN @ PRESS &TEMP (kg/m³) 956 956 956 956 994 962
LIQUID VISCOSITY (cP) 0.271 0.270 0.270 0.270 0.777 0.451
COMPOSITION (WT.%)
ETHYLENE 0.99 0.00 1.43
OXYGEN 0.07 0.00 0.10
ETHYLENE OXIDE 67.33 0.00 0.00 0.00 0.00 0.00 10.27 91.52
CARBON DIOXIDE 0.55 0.00 0.00 0.00 0.00 0.00 0.00 0.79
WATER 30.54 98.08 98.08 98.08 98.08 98.08 89.68 5.43
NITROGEN 0.00 0.00
ARGON 0.19 0.28
METHANE 0.28 0.40
ETHANE 0.01 0.01
MEG 0.01 1.89 1.89 1.89 1.89 1.89 0.03 0.00
DEG 0.00 0.00 0.00 0.00 0.00
TEG 0.00 0.00 0.00 0.00 0.00
PEG 0.00 0.00 0.00 0.00 0.00
FORMALDEHYDE 0.00 0.03 0.03 0.03 0.03 0.03 0.01 0.00
ACETALDEHYDE 0.02 0.00 0.00 0.00 0.00 0.00 0.00 0.03

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 63-SD-1032
DATE: 3/11/2016

STREAM NUMBER 309 310 311 312 313 314 315 316
STREAM DESCRIPTION REABSORBER REABSORBER REABSORBER REABSORBER REABSORBER RECLAIM RECLAIM RECLAIM GAS
WATER OVERHEAD GROSS RECIR- NET BOTTOMS COMPRESSOR COMP'R TO CO2
BOTTOMS CULATION FEED GAS KO DRUM REMOVAL
COND

MOLE FRACTION LIQUID 1.0 0.0 1.0 1.0 1.0 0.0 1.0 0.0
TEMPERATURE (°C) 43 43 48 48 53 45 45 127
PRESSURE (barg) 6.0 0.4 0.5 5.1 5.1 0.1 0.1 20.2
PHASE LIQUID VAPOR LIQUID LIQUID LIQUID VAPOR LIQUID VAPOR
VAPOR MASS FLOW RATE (kg/h) 2,310.3 4,642.7 4,476.3
VAPOR FLOW @ PRES & TEMP (m³/h) 1,531.0 3,624.5 219.0
VAPOR MOLECULAR WEIGHT 28.2 30.2 31.0
VAPOR DEN @ PRESS &TEMP (kg/m³) 1.5 1.281 20.438
VAPOR VISCOSITY (cP) 0.013 0.013 0.018
LIQUID MASS FLOW RATE (kg/h) 672,616.5 2,461,408.0 1,715,022.0 746,367.6 1,705.2
LIQUID FLOW @ PRES & TEMP (m³/h) 680.3 2,534.7 1,766.2 770.9 1.7
LIQUID MOLECULAR WEIGHT 18.07 19.13 19.13 19.13 18.02
LIQUID DEN @ PRESS &TEMP (kg/m³) 989 971 971 968 989
LIQUID VISCOSITY (cP) 0.625 0.552 0.551 0.507 0.651
COMPOSITION (WT.%)
ETHYLENE 0.00 45.43 0.00 0.00 0.00 33.12 0.00 34.35
OXYGEN 0.00 3.26 0.00 0.00 0.00 1.93 0.00 2.00
ETHYLENE OXIDE 0.00 0.00 9.33 9.33 9.33 0.00 0.00 0.00
CARBON DIOXIDE 0.00 25.21 0.01 0.01 0.01 44.06 0.04 45.69
WATER 99.56 3.94 90.26 90.26 90.26 4.30 99.95 0.75
NITROGEN 0.00 0.09 0.00 0.00 0.00 0.05 0.00 0.05
ARGON 0.00 8.92 0.00 0.00 0.00 5.35 0.00 5.55
METHANE 0.00 12.69 0.00 0.00 0.00 10.93 0.00 11.34
ETHANE 0.00 0.46 0.00 0.00 0.00 0.26 0.00 0.27
MEG 0.44 0.00 0.40 0.40 0.40 0.00 0.00 0.00
DEG 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
TEG 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
PEG 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
FORMALDEHYDE 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
ACETALDEHYDE 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 65-SD-1051
DATE: 3/11/2016

STREAM NUMBER 512 530 536 538 543 544 551 554 560
STREAM DESCRIPTION TREATED TREATED EVAP. TREATING UNIT EVAP. RECYCLE EVAP. DISPLACE- TREATED
CYCLE WATER WATER CONDENSATE WASTE WATER CONDENSATE WATER HOTWELL TO MENT WATER WATER TO
TO TREATED TO RECYCLE RECYCLE RECYCLE
WATER TANK WATER TANK WATER TANK WATER TANK

MOLE FRACTION LIQUID 1.0 1.0 1.0 1.0 1.0 1.0 1.0
TEMPERATURE (°C) 43 93 60 67 43 45 35
PRESSURE (barg) 6.1 19.6 3.9 1.0 6.5 5.4 2.0
PHASE LIQUID LIQUID LIQUID LIQUID LIQUID LIQUID LIQUID
VAPOR MASS FLOW RATE (kg/h)
VAPOR FLOW @ PRES & TEMP (m³/h)
VAPOR MOLECULAR WEIGHT
VAPOR DEN @ PRESS &TEMP (kg/m³)
VAPOR VISCOSITY (cP)
LIQUID MASS FLOW RATE (kg/h) 38,889.2 45,649.2 NNF 23,650.5 589,367.0 672,615.4 75,398.0 6,760.0
LIQUID FLOW @ PRES & TEMP (m³/h) 39.2 47.3 24.1 602.9 680.4 76.4 6.8
LIQUID MOLECULAR WEIGHT 18.59 18.50 18.10 18.08 18.07 18.02 18.02
LIQUID DEN @ PRESS &TEMP (kg/m³) 993 966 982 978 989 987 991
LIQUID VISCOSITY (cP) 0.656 0.312 0.463 0.423 0.624 0.598 0.728
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 98.77 96.29 99.86 99.50 99.56 100.00 100.00
NITROGEN
ARGON
METHANE
ETHANE
MEG 1.23 3.71 0.14 0.50 0.44 0.00 0.00
DEG
TEG
PEG
FORMALDEHYDE 0.00 0.00
ACETALDEHYDE

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 65-SD-1052
DATE: 3/11/2016

STREAM NUMBER 501 502 503 504 505 513 528 539 552 553 574
STREAM DESCRIPTION GLYCOL FEED GLYCOL FEED EXTRACTION GLYCOL GLYCOL ALDEHYDE EVAPORATOR ALDEHYDE EXTRACTION WASTE WATER EVAPORATOR
STRIPPER STRIPPER STEAM TO REACTOR REACTOR STRIPPER CONDENSATE PURGE STEAM TO VOC STRIPPER COND. TO
OVERHEADS BOTTOMS GLYCOL FEED FEED OUTLET OVERHEAD E-6521 OVERHEAD REABSORBER
STRIPPER BTMS HEATER

MOLE FRACTION LIQUID 0.0 1.0 0.0 1.0 1.0 0.0 1.0 1.0 0.0 0.0 1.0
TEMPERATURE (°C) 56 65 123 151 195 190 113 45 123 133 73
PRESSURE (barg) 0.5 0.5 1.2 22.0 22.0 11.8 4.4 2.1 1.2 2.0 0.6
PHASE VAPOR LIQUID VAPOR LIQUID LIQUID VAPOR LIQUID LIQUID VAPOR VAPOR LIQUID
VAPOR MASS FLOW RATE (kg/h) 2,433.3 13,384.5 12,261.7 19,147.3 2,636.1
VAPOR FLOW @ PRES & TEMP (m³/h) 1,078.7 11,099.5 1,933.5 15,878.5 1,628.1
VAPOR MOLECULAR WEIGHT 41.06 18.05 18.04 18.05 18.11
VAPOR DEN @ PRESS &TEMP (kg/m³) 2.256 1.206 6.342 1.206 1.619
VAPOR VISCOSITY (cP) 0.011 0.013 0.016 0.013 0.013
LIQUID MASS FLOW RATE (kg/h) 759,299.9 759,299.6 759,299.6 589,368.3 10,825.6 589,367.0
LIQUID FLOW @ PRES & TEMP (m³/h) 789.6 862.1 858.1 620.9 11.0 604.8
LIQUID MOLECULAR WEIGHT 19.07 19.07 19.83 18.08 18.02 18.08
LIQUID DEN @ PRESS &TEMP (kg/m³) 962 881 885 949 987 974
LIQUID VISCOSITY (cP) 0.422 0.177 0.148 0.247 0.600 0.389
COMPOSITION (WT.%)
ETHYLENE 0.61 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
OXYGEN 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
ETHYLENE OXIDE 91.55 8.87 0.00 8.87 0.00 0.00 0.00 0.00 0.00 0.00 0.00
CARBON DIOXIDE 2.98 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
WATER 4.72 90.73 99.75 90.73 87.28 99.77 99.50 99.96 99.75 99.09 99.50
NITROGEN 0.00
ARGON 0.04
METHANE 0.06
ETHANE 0.00
MEG 0.00 0.39 0.25 0.39 11.70 0.04 0.50 0.04 0.25 0.00 0.50
DEG 0.96
TEG 0.06
PEG 0.01
FORMALDEHYDE
ACETALDEHYDE 0.02 0.19 0.00 0.00 0.00 0.90 0.00

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 65-SD-1053
DATE: 3/11/2016

STREAM NUMBER 505 506 509 510 511 513 514 515 516 517 518 521 530 531 532 533
STREAM DESCRIPTION GLYCOL 1ST EFFECT 2ND EFFECT 1ST EFFECT 2ND EFFECT ALDEHYDE ALDEHYDE 3RD EFFECT 2ND EFFECT 2ND EFFECT 3RD EFFECT 3RD EFFECT TREATED FIRST EFFECT 2ND EFFECT 3RD EFFECT
REACTOR OVERHEAD CONDENSATE BOTTOMS OVERHEAD STRIPPER STRIPPER REB. NON- REB. BOTTOMS OVERHEADS BOTTOMS WATER REFLUX REFLUX REFLUX
OUTLET OVERHEAD BOTTOMS CONDENSIBLE ALDEHYDE
VENT PURGE

MOLE FRACTION LIQUID 1.0 0.0 1.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 1.0 1.0 1.0 1.0 1.0
TEMPERATURE (°C) 195 201 200 202 191 190 190 190 200 193 181 183 93 93 93 93
PRESSURE (barg) 22.0 14.9 14.9 14.9 11.8 11.8 11.9 11.8 14.9 11.9 9.2 9.2 19.6 19.6 19.6 19.6
PHASE LIQUID VAPOR LIQUID LIQUID VAPOR VAPOR LIQUID VAPOR VAPOR LIQUID VAPOR LIQUID LIQUID LIQUID LIQUID LIQUID
VAPOR MASS FLOW RATE (kg/h) 61,168.2 73,048.0 12,261.7 500.0 1,000.0 83,504.5
VAPOR FLOW @ PRES & TEMP (m³/h) 7,859.4 11,519.3 1,933.5 78.9 128.2 16,407.1
VAPOR MOLECULAR WEIGHT 18.09 18.09 18.04 18.02 18.08 18.09
VAPOR DEN @ PRESS &TEMP (kg/m³) 7.783 6.341 6.342 6.334 7.799 5.090
VAPOR VISCOSITY (cP) 0.016 0.016 0.016 0.016 0.016 0.015
LIQUID MASS FLOW RATE (kg/h) 759,299.6 60,168.2 709,260.8 131,454.6 639,865.3 560,531.3 45,649.2 3,058.4 3,652.4 4,170.6
LIQUID FLOW @ PRES & TEMP (m³/h) 858.1 69.3 807.4 149.5 718.2 620.2 47.3 3.2 3.8 4.3
LIQUID MOLECULAR WEIGHT 19.83 18.09 20.15 18.09 20.41 20.79 18.50 18.50 18.50 18.50
LIQUID DEN @ PRESS &TEMP (kg/m³) 885 868 878 879 891 904 966 966 966 966
LIQUID VISCOSITY (cP) 0.148 0.131 0.145 0.138 0.154 0.167 0.312 0.312 0.312 0.312
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 87.28 99.39 99.39 85.28 99.45 99.77 99.44 99.95 99.39 83.72 99.42 81.48 96.29 96.29 96.29 96.29
NITROGEN
ARGON
METHANE
ETHANE
MEG 11.70 0.57 0.58 13.56 0.55 0.04 0.56 0.04 0.04 14.98 0.58 17.05 3.71 3.71 3.71 3.71
DEG 0.96 1.10 1.22 0.00 1.39
TEG 0.06 0.06 0.07 0.00 0.08
PEG 0.01 0.01 0.01 0.00 0.01
FORMALDEHYDE
ACETALDEHYDE 0.04 0.03 0.19 0.02 0.57

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 65-SD-1054
DATE: 3/11/2016

STREAM NUMBER 514 518 519 520 521 522 523 524 525 526 529 534 535 537 561
STREAM DESCRIPTION ALDEHYDE 3RD EFFECT 4TH EFFECT 4TH EFFECT 3RD EFFECT 4TH EFFECT 5TH EFFECT 5TH EFFECT 4TH EFFECT 5TH EFFECT 5TH EFFECT 4TH EFFECT 5TH EFFECT EXTRACTION EXTRACTION
STRIPPER OVERHEADS REB. NON- CONDENSATE BOTTOMS OVERHEADS REB. NON- CONDENSATE BOTTOMS OVERHEADS BOTTOMS REFLUX REFLUX STEAM TO STEAM TO
BOTTOMS CONDENSIBLE CONDENSIBLE 6TH EFFECT E-6522
VENT VENT REBOILER

MOLE FRACTION LIQUID 1.0 0.0 0.0 1.0 1.0 0.0 0.0 1.0 1.0 0.0 1.0 1.0 1.0 0.0 0.0
TEMPERATURE (°C) 190 181 180 180 183 171 169 169 172 159 162 93 93 159 159
PRESSURE (barg) 11.9 9.2 9.2 9.2 9.2 6.9 6.9 6.9 7.0 4.9 4.9 19.6 19.6 4.9 4.9
PHASE LIQUID VAPOR VAPOR LIQUID LIQUID VAPOR VAPOR LIQUID LIQUID VAPOR LIQUID LIQUID LIQUID VAPOR VAPOR
VAPOR MASS FLOW RATE (kg/h) 83,504.5 500.0 94,706.4 500.0 106,198.7 84,250.6 21,948.2
VAPOR FLOW @ PRES & TEMP (m³/h) 16,407.1 98.3 23,543.2 124.4 34,903.3 27,689.8 7,213.6
VAPOR MOLECULAR WEIGHT 18.09 18.02 18.09 18.02 18.10 18.10 18.10
VAPOR DEN @ PRESS &TEMP (kg/m³) 5.090 5.084 4.023 4.019 3.043 3.043 3.043
VAPOR VISCOSITY (cP) 0.015 0.015 0.015 0.015 0.015 0.015 0.015
LIQUID MASS FLOW RATE (kg/h) 131,454.6 214,459.1 560,531.3 308,665.8 470,560.2 369,671.4 4,735.3 5,309.9
LIQUID FLOW @ PRES & TEMP (m³/h) 149.5 240.8 620.2 342.4 513.1 396.2 4.9 5.5
LIQUID MOLECULAR WEIGHT 18.09 18.09 20.79 18.09 21.40 22.53 18.50 18.50
LIQUID DEN @ PRESS &TEMP (kg/m³) 879 891 904 901 917 933 966 966
LIQUID VISCOSITY (cP) 0.138 0.148 0.167 0.157 0.183 0.209 0.312 0.312
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 99.44 99.42 99.96 99.43 81.48 99.42 99.97 99.43 78.01 99.37 72.14 96.29 96.29 99.37 99.37
NITROGEN
ARGON
METHANE
ETHANE
MEG 0.56 0.58 0.03 0.57 17.05 0.58 0.03 0.57 20.23 0.63 25.62 3.71 3.71 0.63 0.63
DEG 1.39 1.66 0.00 2.11
TEG 0.08 0.09 0.00 0.11
PEG 0.01 0.01 0.00 0.01
FORMALDEHYDE
ACETALDEHYDE 0.00 0.00

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 65-SD-1055
DATE: 3/11/2016

STREAM NUMBER 503 524 529 537 546 552 562 563 564 565 566 567 568 569 570 571 572 573 576
STREAM DESCRIPTION EXTRACTION 5TH EFFECT 5TH EFFECT EXTRACTION EXTRACTION EXTRACTION 6TH EFFECT 6TH EFFECT 6TH EFFECT 7TH EFFECT 7TH EFFECT 7TH EFFECT 6TH EFFECT 7TH EFFECT EXTRACTION 6TH EFFECT 7TH EFFECT EXTRACTION EXTRACTION
STEAM TO CONDENSATE BOTTOMS STEAM TO STEAM TO STEAM TO CONDENSATE OVERHEADS BOTTOMS CONDENSATE OVERHEADS BOTTOMS REFLUX REFLUX STEAM TO REB. NON- REB. NON- STEAM TO STEAM TO
GLYCOL FEED 6TH EFFECT STRIPPING E-6521 8TH EFFECT CONDENSIBLE CONDENSIBLE E-6223 7TH EFFECT
STRIPPER REBOILER COLUMN REBOILER VENT VENT REBOILER

MOLE FRACTION LIQUID 0.0 1.0 1.0 0.0 0.0 0.0 1.0 0.0 1.0 1.0 0.0 1.0 1.0 1.0 0.0 0.0 0.0 0.0 0.0
TEMPERATURE (°C) 123 169 162 159 123 123 158 144 149 144 123 132 93 93 123 158 144 144 144
PRESSURE (barg) 1.2 6.9 4.9 4.9 1.2 1.2 4.9 3.1 3.1 3.1 1.2 1.2 19.6 19.6 1.2 4.9 3.1 3.1 3.1
PHASE VAPOR LIQUID LIQUID VAPOR VAPOR VAPOR LIQUID VAPOR LIQUID LIQUID VAPOR LIQUID LIQUID LIQUID VAPOR VAPOR VAPOR VAPOR VAPOR
VAPOR MASS FLOW RATE (kg/h) 13,384.5 84,250.6 14,754.8 19,147.3 96,827.5 107,315.6 60,029.0 500.0 500.0 5,000.0 91,827.5
VAPOR FLOW @ PRES & TEMP (m³/h) 11,099.5 27,689.8 12,235.9 15,878.5 45,118.7 88,990.6 49,778.6 164.4 233.0 2,329.8 42,788.8
VAPOR MOLECULAR WEIGHT 18.05 18.10 18.05 18.05 18.06 18.05 18.05 18.02 18.02 18.06 18.06
VAPOR DEN @ PRESS &TEMP (kg/m³) 1.206 3.043 1.206 1.206 2.146 1.206 1.206 3.041 2.146 2.146 2.146
VAPOR VISCOSITY (cP) 0.013 0.015 0.013 0.013 0.014 0.013 0.013 0.014 0.014 0.014 0.014
LIQUID MASS FLOW RATE (kg/h) 308,665.8 369,671.4 392,416.3 282,526.2 483,743.9 190,250.8 9,682.3 15,040.2
LIQUID FLOW @ PRES & TEMP (m³/h) 342.4 396.2 429.9 296.6 522.5 193.4 10.0 15.6
LIQUID MOLECULAR WEIGHT 18.09 22.53 18.09 24.43 18.08 29.57 18.50 18.50
LIQUID DEN @ PRESS &TEMP (kg/m³) 901 933 913 952 926 984 966 966
LIQUID VISCOSITY (cP) 0.157 0.209 0.171 0.253 0.189 0.375 0.312 0.312
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 99.75 99.43 72.14 99.37 99.75 99.75 99.41 99.67 63.53 99.46 99.75 45.69 96.29 96.29 99.75 99.97 99.98 99.67 99.67
NITROGEN
ARGON
METHANE
ETHANE
MEG 0.25 0.57 25.62 0.63 0.25 0.25 0.59 0.33 33.54 0.54 0.25 49.96 3.71 3.71 0.25 0.03 0.02 0.33 0.33
DEG 2.11 2.77 0.00 4.11
TEG 0.11 0.15 0.00 0.22
PEG 0.01 0.01 0.00 0.02
FORMALDEHYDE
ACETALDEHYDE 0.00 0.00

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 65-SD-1056
DATE: 3/11/2016

STREAM NUMBER 527 528 540 541 542 545 548 549 550 551 567 570
STREAM DESCRIPTION 8TH EFFECT EVAPORATOR 8TH EFFECT 8TH EFFECT 8TH EFFECT CRUDE EVAPORATOR 8TH EFFECT EVAP. EVAP. 7TH EFFECT EXTRACTION
REB. NON- CONDENSATE OVERHEAD CONDENSER CONDENSER GLYCOL HOTWELL REFLUX HOTWELL TO HOTWELL TO BOTTOMS STEAM TO
CONDENSIBLE VENT CONDENSATE CONDENSATE DRYING COL. RECYCLE 8TH EFFECT
VENT REFLUX WATER TANK REBOILER

MOLE FRACTION LIQUID 0.0 1.0 0.0 0.0 1.0 1.0 1.0 1.0 1.0 1.0 0.0
TEMPERATURE (°C) 113 113 59 45 45 91 45 45 45 132 123
PRESSURE (barg) 0.6 4.4 140 mm Hg 140 mm Hg 0.1 7.4 5.4 5.4 5.4 1.2 1.2
PHASE VAPOR LIQUID VAPOR VAPOR LIQUID LIQUID LIQUID LIQUID LIQUID LIQUID VAPOR
VAPOR MASS FLOW RATE (kg/h) 500.0 100,704.1 129.4 60,029.0
VAPOR FLOW @ PRES & TEMP (m³/h) 552.2 823,270.5 970.8 49,778.6
VAPOR MOLECULAR WEIGHT 18.02 18.02 22.02 18.05
VAPOR DEN @ PRESS &TEMP (kg/m³) 0.905 0.122 0.133 1.206
VAPOR VISCOSITY (cP) 0.013 0.010 0.014 0.013
LIQUID MASS FLOW RATE (kg/h) 589,368.3 100,574.7 114,789.5 100,574.7 25,176.7 75,398.0 190,250.8
LIQUID FLOW @ PRES & TEMP (m³/h) 620.9 101.9 109.1 101.9 25.5 76.4 193.4
LIQUID MOLECULAR WEIGHT 18.08 18.02 51.14 18.02 18.02 18.02 29.57
LIQUID DEN @ PRESS &TEMP (kg/m³) 949 987 1,052 987 987 987 984
LIQUID VISCOSITY (cP) 0.247 0.600 1.579 0.598 0.598 0.598 0.375
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 100.00 99.50 99.93 49.05 100.00 10.00 100.00 100.00 100.00 45.69 99.75
NITROGEN 0.07 50.95
ARGON
METHANE
ETHANE
MEG 0.50 82.80 49.96 0.25
DEG 6.80 4.11
TEG 0.37 0.22
PEG 0.03 0.02
FORMALDEHYDE
ACETALDEHYDE 0.00

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 66-SD-1061
DATE: 3/11/2016

STREAM NUMBER 601 602 603 604 613 616 617

STREAM DESCRIPTION DRYING DRYING DRYING DRYING VAPOR TO DRYING DRYING
COLUMN COLUMN COLUMN COLUMN EJ-6612 COLUMN COLUMN
OVERHEADS BOTTOMS REFLUX CONDENSATE CONDENSER HOTWELL
TO WASTE CONDENSATE LIQUID

MOLE FRACTION LIQUID 0.0 1.0 1.0 1.0 0.0 1.0 1.0
TEMPERATURE (°C) 59 163 45 45 45 45 45
PRESSURE (barg) 140 mm Hg 5.0 5.4 4.6 105 mm Hg 0.1 4.6
PHASE VAPOR LIQUID LIQUID LIQUID VAPOR LIQUID LIQUID
VAPOR MASS FLOW RATE (kg/h) 19,662.8 271.4
VAPOR FLOW @ PRES & TEMP (m³/h) 160,440.3 2,483.7
VAPOR MOLECULAR WEIGHT 18.05 21.03
VAPOR DEN @ PRESS &TEMP (kg/m³) 0.123 0.109
VAPOR VISCOSITY (cP) 0.010 0.013
LIQUID MASS FLOW RATE (kg/h) 103,316.2 8,080.5 14,515.2 22,391.3 22,595.7
LIQUID FLOW @ PRES & TEMP (m³/h) 103.1 8.2 14.7 22.7 22.9
LIQUID MOLECULAR WEIGHT 64.26 18.02 18.02 18.02 18.02
LIQUID DEN @ PRESS &TEMP (kg/m³) 1,002 987 987 987 987
LIQUID VISCOSITY (cP) 1.003 0.598 0.598 0.600 0.600
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 99.44 0.00 99.99 99.99 59.82 99.99 99.99
NITROGEN 0.55 0.00 0.00 0.00 40.14 0.00 0.00
ARGON
METHANE
ETHANE
MEG 0.00 91.99 0.01 0.01 0.00 0.01 0.01
DEG 0.00 7.56 0.00 0.00 0.00 0.00 0.00
TEG 0.00 0.41 0.00 0.00 0.00 0.00 0.00
PEG 0.00 0.04 0.00 0.00 0.00 0.00 0.00
FORMALDEHYDE 0.00 0.00 0.00 0.00 0.00 0.00 0.00
ACETALDEHYDE 0.00 0.00 0.00 0.00 0.03 0.00 0.00

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 66-SD-1062
DATE: 9/7/2016
(R-3)
STREAM NUMBER 605 606 607 608 618 619 624
STREAM DESCRIPTION MEG COLUMN MEG COLUMN MEG COLUMN MEG MEG COLUMN MEG COLUMN MEG COLUMN
OVERHEADS BOTTOMS VAPOR PRODUCT TO CONDENSER CONDENSER REFLUX
DISTILLATE CRUDE STEAM BLOWDOWN
GLYCOL
HEATER
MOLE FRACTION LIQUID 0.0 1.0 0.0 1.0 0.0 1.0 1.0
TEMPERATURE (°C) 143 170 134 144 121 121 135
PRESSURE (barg) 110 mm Hg 5.1 85 mm Hg 4.5 1.0 9.2 5.8
PHASE VAPOR LIQUID VAPOR LIQUID VAPOR LIQUID LIQUID
VAPOR MASS FLOW RATE (kg/h) 145,704.0 4,972.2 60,657.5
VAPOR FLOW @ PRES & TEMP (m³/h) 551,976.0 25,159.7 55,043.7
VAPOR MOLECULAR WEIGHT 61.96 58.90 18.06
VAPOR DEN @ PRESS &TEMP (kg/m³) 0.264 0.198 1.102
VAPOR VISCOSITY (cP) 0.012 0.012 0.013
LIQUID MASS FLOW RATE (kg/h) 11,063.7 87,500.0 11,815.8 140,731.8
LIQUID FLOW @ PRES & TEMP (m³/h) 11.0 85.9 12.4 137.1
LIQUID MOLECULAR WEIGHT 90.98 62.07 19.40 62.07
LIQUID DEN @ PRESS &TEMP (kg/m³) 1,002 1,018 951 1,026
LIQUID VISCOSITY (cP) 1.063 1.189 0.250 1.312
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 0.00 0.00 0.00 0.00 99.66 89.94
NITROGEN 0.15 0.00 4.42 0.00 0.00 0.00
ARGON
METHANE
ETHANE
MEG 99.85 25.24 95.57 99.98 0.31 10.00 100.00
DEG 0.00 70.61 0.00 0.02 0.00 0.00 0.00
TEG 0.00 3.80 0.00 0.00 0.00 0.00 0.00
PEG 0.00 0.35 0.00 0.00 0.00 0.00 0.00
FORMALDEHYDE 0.00 0.00 0.00 0.00 0.03 0.06 0.00
ACETALDEHYDE 0.00 0.00 0.00 0.00 0.00 0.00 0.00

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 66-SD-1063
DATE: 3/11/2016

STREAM NUMBER 608 627

STREAM DESCRIPTION MEG MEG PRODUCT
PRODUCT TO (PUMP-OUT
CRUDE RATE)
GLYCOL
HEATER
MOLE FRACTION LIQUID 1.0 1.0
TEMPERATURE (°C) 144 48
PRESSURE (barg) 4.5 7.7
PHASE LIQUID LIQUID
VAPOR MASS FLOW RATE (kg/h)
VAPOR FLOW @ PRES & TEMP (m³/h)
VAPOR MOLECULAR WEIGHT
VAPOR DEN @ PRESS &TEMP (kg/m³)
VAPOR VISCOSITY (cP)
LIQUID MASS FLOW RATE (kg/h) 87,500.0 264,700.0
LIQUID FLOW @ PRES & TEMP (m³/h) 85.92 242.0
LIQUID MOLECULAR WEIGHT 62.07 62.07
LIQUID DEN @ PRESS &TEMP (kg/m³) 1018.39 1,093
LIQUID VISCOSITY (cP) 1.19 7.010
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 0.00 0.00
NITROGEN
ARGON
METHANE
ETHANE
MEG 99.98 99.98
DEG 0.02 0.02
TEG 0.00 0.00
PEG 0.00 0.00
FORMALDEHYDE 0.00 0.00
ACETALDEHYDE

TOTAL (WT.%) 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 66-SD-1064
DATE: 3/11/2016

STREAM NUMBER 609 610 615 622 625

STREAM DESCRIPTION MEG COLUMN MEG COLUMN MEG COLUMN MEG COLUMN MEG COLUMN
PRE- VACUUM PUMP VACUUM PUMP LIGHTS VACUUM PUMP
CONDENSATE BLEED BLEED RECYCLE VENT

MOLE FRACTION LIQUID 1.0 1.0 1.0 0.0

TEMPERATURE (°C) 45 45 66 45
PRESSURE (barg) 0.1 0.1 19.0 0.1
PHASE LIQUID LIQUID LIQUID VAPOR
VAPOR MASS FLOW RATE (kg/h) 220.3
VAPOR FLOW @ PRES & TEMP (m³/h) 188.7
VAPOR MOLECULAR WEIGHT 28.04
VAPOR DEN @ PRESS &TEMP (kg/m³) 1.168
VAPOR VISCOSITY (cP) 0.019
LIQUID MASS FLOW RATE (kg/h) 4,743.6 7.1 8,071.2
LIQUID FLOW @ PRES & TEMP (m³/h) 4.3 0.0 7.5
LIQUID MOLECULAR WEIGHT 62.07 62.05 63.81
LIQUID DEN @ PRESS &TEMP (kg/m³) 1,097 1,097 1,081
LIQUID VISCOSITY (cP) 7.734 7.728 4.267
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 0.00 0.00 0.00 0.00
NITROGEN 0.00 0.01 0.00 99.81
ARGON
METHANE
ETHANE
MEG 100.00 99.98 93.43 0.19
DEG 0.00 0.00 6.55 0.00
TEG 0.00 0.00 0.02 0.00
PEG 0.00 0.00 0.00 0.00
FORMALDEHYDE 0.00 0.00 0.00 0.00
ACETALDEHYDE

TOTAL (WT.%) 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 66-SD-1065
DATE: 3/11/2016

STREAM NUMBER 611 612 614 620 621 626

STREAM DESCRIPTION MEG MEG SPLITTER MEG SPLITTER MEG SPLITTER EJ-6632A MEG SPLITTER
SPLITTER BOTTOMS VENT TO VACUUM PUMP AFTERSTAGE VACUUM PUMP
SIDEDRAW EJ-6632 BLEED CONDENSATE VENT

MOLE FRACTION LIQUID 1.0 1.0 0.0 1.0 0.0

TEMPERATURE (°C) 92 175 50 45 45
PRESSURE (barg) 0.1 5.1 7 mm Hg 0.1 0.1
PHASE LIQUID LIQUID VAPOR LIQUID VAPOR
VAPOR MASS FLOW RATE (kg/h) 67.6 100.2
VAPOR FLOW @ PRES & TEMP (m³/h) 5,954.7 85.8
VAPOR MOLECULAR WEIGHT 32.69 28.04
VAPOR DEN @ PRESS &TEMP (kg/m³) 0.011 1.168
VAPOR VISCOSITY (cP) 0.017 0.019
LIQUID MASS FLOW RATE (kg/h) 3,303.6 7,744.5 16.9
LIQUID FLOW @ PRES & TEMP (m³/h) 3.1 7.7 0.0
LIQUID MOLECULAR WEIGHT 66.50 108.07 62.12
LIQUID DEN @ PRESS &TEMP (kg/m³) 1,062 1,000 1,097
LIQUID VISCOSITY (cP) 2.513 1.091 7.735
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 0.00 0.00 0.00 0.00 0.00
NITROGEN 0.00 0.00 73.95 0.01 99.81
ARGON
METHANE
ETHANE
MEG 83.96 0.02 25.99 99.76 0.19
DEG 16.00 94.07 0.06 0.23 0.00
TEG 0.04 5.41 0.00 0.00 0.00
PEG 0.00 0.50 0.00 0.00 0.00
FORMALDEHYDE
ACETALDEHYDE

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 67-SD-1071
DATE: 3/11/2016

STREAM NUMBER 701 704 705 706 709 711 714 715 716
STREAM DESCRIPTION DEG DEG COLUMN DEG COLUMN DEG/TEG DEG DEG/TEG DEG/TEG DEG DEG PRODUCT
PRODUCT CATCHPAN BOTTOMS EJECTOR CONDENSER COLUMN COLUMN HOTWELL (PUMP-OUT
PURGE INTER- VENT VACUUM PUMP VAUUM PUMP CONDENSATE RATE)
CONDENSATE BLEED VENT

MOLE FRACTION LIQUID 1.0 1.0 1.0 0.0 1.0 0.0 1.0 1.0
TEMPERATURE (°C) 48 128 177 50 45 45 45 48
PRESSURE (barg) 4.8 0.1 5.8 7 mm Hg 0.1 0.1 0.1 5.9
PHASE LIQUID LIQUID LIQUID VAPOR LIQUID VAPOR LIQUID LIQUID
VAPOR MASS FLOW RATE (kg/h) 84.0 194.2
VAPOR FLOW @ PRES & TEMP (m³/h) 5,888.6 166.4
VAPOR MOLECULAR WEIGHT 28.73 28.03
VAPOR DEN @ PRESS &TEMP (kg/m³) 0.014 1.167
VAPOR VISCOSITY (cP) 0.019 0.019
LIQUID MASS FLOW RATE (kg/h) 7,228.7 53.3 508.7 2.9 4.4 82,471.1
LIQUID FLOW @ PRES & TEMP (m³/h) 6.6 0.1 0.5 0.0 0.0 75.0
LIQUID MOLECULAR WEIGHT 106.12 105.18 152.60 90.97 83.54 106.12
LIQUID DEN @ PRESS &TEMP (kg/m³) 1,100 1,038 1,013 1,100 1,100 1,100
LIQUID VISCOSITY (cP) 11.866 1.761 1.245 11.161 10.238 11.866
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 0.00 0.00 0.00 0.00 0.01 0.00 0.01 0.00
NITROGEN 0.00 0.00 0.00 96.48 0.03 99.92 0.02 0.00
ARGON
METHANE
ETHANE
MEG 0.01 1.26 0.00 0.45 23.56 0.06 38.94 0.01
DEG 99.99 98.74 0.35 3.07 75.87 0.02 58.72 99.99
TEG 0.00 0.00 92.01 0.00 0.54 0.00 2.31 0.00
PEG 0.00 0.00 7.64 0.00 0.00 0.00 0.00 0.00
FORMALDEHYDE
ACETALDEHYDE

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 67-SD-1072
DATE: 3/11/2016

STREAM NUMBER 702 707 708 710 717

STREAM DESCRIPTION TEG TEG COLUMN TEG COLUMN TEG TEG PRODUCT
PRODUCT BOTTOMS TO CATCHPAN CONDENSER (PUMP-OUT
OSBL VENT RATE)
INCINERATOR

MOLE FRACTION LIQUID 1.0 1.0 1.0 0.0 1.0

TEMPERATURE (°C) 48 86 146 50 48
PRESSURE (barg) 3.4 5.5 0.1 7 mm Hg 5.9
PHASE LIQUID LIQUID LIQUID VAPOR LIQUID
VAPOR MASS FLOW RATE (kg/h) 16.1
VAPOR FLOW @ PRES & TEMP (m³/h) 1,152.9
VAPOR MOLECULAR WEIGHT 28.19
VAPOR DEN @ PRESS &TEMP (kg/m³) 0.014
VAPOR VISCOSITY (cP) 0.019
LIQUID MASS FLOW RATE (kg/h) 379.9 77.8 50.9 15,529.9
LIQUID FLOW @ PRES & TEMP (m³/h) 0.3 0.1 0.0 14.0
LIQUID MOLECULAR WEIGHT 150.15 169.38 148.19 150.15
LIQUID DEN @ PRESS &TEMP (kg/m³) 1,109 1,082 1,037 1,109
LIQUID VISCOSITY (cP) 14.370 4.604 1.686 14.370
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER
NITROGEN 0.00 0.00 0.00 99.22 0.00
ARGON
METHANE
ETHANE
MEG 0.00 0.00 0.00 0.00 0.00
DEG 0.03 0.00 3.22 0.14 0.03
TEG 99.97 50.00 96.78 0.63 99.97
PEG 0.00 50.00 0.00 0.00 0.00
FORMALDEHYDE
ACETALDEHYDE

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 1 - DESIGN CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 69-SD-1093
DATE: 3/11/2016

STREAM NUMBER 315 538 539 604 715 901 902

STREAM DESCRIPTION RECLAIM TREATING UNIT ALDEHYDE DRYING DEG WASTE WASTE
COMP'R WASTE WATER PURGE COLUMN HOTWELL WATER TO WATER TO
KO DRUM CONDENSATE CONDENSATE OSBL OSBL
COND TO WASTE

MOLE FRACTION LIQUID 1.0 1.0 1.0 1.0 1.0 1.0 1.0
TEMPERATURE (°C) 45.0 60 45 45 45 45 60
PRESSURE (barg) 3.0 3.9 2.1 4.6 0.1 8.0 8.0
PHASE LIQUID LIQUID LIQUID LIQUID LIQUID LIQUID LIQUID
VAPOR MASS FLOW RATE (kg/h)
VAPOR FLOW @ PRES & TEMP (m³/h)
VAPOR MOLECULAR WEIGHT
VAPOR DEN @ PRESS &TEMP (kg/m³)
VAPOR VISCOSITY (cP)
LIQUID MASS FLOW RATE (kg/h) 1,705.2 23,650.5 10,825.6 14,515.2 4.4 27,050.4 23,650.5
LIQUID FLOW @ PRES & TEMP (m³/h) 1.7 24.1 11.0 14.7 0.0 27.3 24.1
LIQUID MOLECULAR WEIGHT 18.02 18.10 18.02 18.02 83.54 18.03 18.10
LIQUID DEN @ PRESS &TEMP (kg/m³) 989 982 987 987 1100 990 983
LIQUID VISCOSITY (cP) 0.651 0.463 0.600 0.598 10.238 0.598 0.466
COMPOSITION (WT.%)
ETHYLENE 0.00
OXYGEN 0.00
ETHYLENE OXIDE 0.00
CARBON DIOXIDE 0.04
WATER 99.95 99.86 99.96 99.99 0.01 99.96 99.96
NITROGEN 0.00 0.00 0.00 0.00 0.02 0.00 0.00
ARGON 0.00
METHANE 0.00
ETHANE 0.00
MEG 0.00 0.14 0.04 0.01 38.94 0.03 0.03
DEG 0.00 0.00 0.00 0.00 58.72 0.01 0.01
TEG 0.00 0.00 0.00 0.00 2.31 0.00 0.00
PEG 0.00 0.00 0.00 0.00 0.00 0.00 0.00
FORMALDEHYDE 0.00 0.00 0.00 0.00 0.00 0.00 0.00
ACETALDEHYDE 0.00 0.00 0.00 0.00 0.00 0.00 0.00

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 2 - ZERO STEAM CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 61-SD-1011
DATE: 9/7/2016
(R-3) (R-3) (R-3)
STREAM NUMBER 101 102 103 104 105 106 107 108 109
STREAM DESCRIPTION ETHYLENE OXYGEN METHANE TOTAL FEED TO FEED TO REACTOR REACTOR TOTAL
FEED FEED BALLAST REACTOR REACTOR REACTOR R-6110 R-6120 REACTOR
FEED R-6110 R-6120 OUTLET OUTLET OUTLET

MOLE FRACTION LIQUID 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
TEMPERATURE (°C) 35 35 35 57 57 57 89 89 89
PRESSURE (barg) 40.0 27.0 21.0 21.0 21.0 21.0 18.9 18.9 18.9
PHASE VAPOR VAPOR VAPOR VAPOR VAPOR VAPOR VAPOR VAPOR VAPOR
VAPOR MASS FLOW RATE (kg/h) 54,616.5 53,390.7 176.4 1,750,428.5 875,214.2 875,214.2 875,214.2 875,214.2 1,750,428.5
VAPOR FLOW @ PRES & TEMP (m³/h) 914.2 1,502.6 12.4 84,657.7 42,328.9 42,328.9 51,272.9 51,272.9 102,545.7
VAPOR MOLECULAR WEIGHT 28.05 32.01 16.04 24.74 24.74 24.74 25.04 25.04 25.04
VAPOR DEN @ PRESS &TEMP (kg/m³) 59.741 35.533 14.256 20.677 20.677 20.677 17.070 17.070 17.070
VAPOR VISCOSITY (cP) 0.010 0.021 0.011 0.015 0.015 0.015 0.015 0.015 0.015
LIQUID MASS FLOW RATE (kg/h)
LIQUID FLOW @ PRES & TEMP (m³/h)
LIQUID MOLECULAR WEIGHT
LIQUID DEN @ PRESS &TEMP (kg/m³)
LIQUID VISCOSITY (cP)
COMPOSITION (WT.%)
ETHYLENE 99.92 39.68 39.68 39.68 36.58 36.58 36.58
OXYGEN 99.75 10.35 10.35 10.35 7.31 7.31 7.31
ETHYLENE OXIDE 0.00 0.00 0.00 4.18 4.18 4.18
CARBON DIOXIDE 1.78 1.78 1.78 3.17 3.17 3.17
WATER 0.35 0.35 0.35 0.92 0.92 0.92
NITROGEN 0.00 0.34 0.34 0.34 0.34 0.34 0.34
ARGON 0.24 18.89 18.89 18.89 18.89 18.89 18.89
METHANE 0.03 100.00 27.76 27.76 27.76 27.76 27.76 27.76
ETHANE 0.05 0.85 0.85 0.85 0.85 0.85 0.85
MEG 0.00 0.00 0.00 0.00 0.00 0.00
DEG
TEG
PEG
FORMALDEHYDE 0.00 0.00 0.00 0.00 0.00 0.00
ACETALDEHYDE 0.00 0.00 0.00 0.00 0.00 0.00
K2CO3
KHCO3
TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 2 - ZERO STEAM CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 61-SD-1012
DATE: 3/11/2016

STREAM NUMBER 110 111 112 113 114 115 116 117 118 119 120 121
STREAM DESCRIPTION RICH CYCLE WASH TOWER LEAN CYCLE CYCLE GAS RICH WASH WATER PRE- WASH WATER WASH WATER SCRUBBER CONTACTOR CONTACTOR
WATER OVERHEAD GAS TO PURGE CARBONATE FROM SATURATOR PURGE TO OVERHEADS FEED GAS OVERHEADS
RECYCLE SOLUTION CARBONATE BOTTOMS CARBONATE
COMPRESSOR KO DRUM KO DRUM

MOLE FRACTION LIQUID 1.0 0.0 0.0 0.0 1.0 1.0 1.0 1.0 1.0 0.0 0.0 0.0
TEMPERATURE (°C) 59 45 45 45 107 67 46 47 43 34 65 78
PRESSURE (barg) 18.1 18.5 18.4 18.5 17.5 18.5 18.6 28.7 27.7 18.6 18.6 18.5
PHASE LIQUID VAPOR VAPOR VAPOR LIQUID LIQUID LIQUID LIQUID LIQUID VAPOR VAPOR VAPOR
VAPOR MASS FLOW RATE (kg/h) 1,643,066.3 1,642,421.2 645.6 1,662,279.3 1,679,542.3 1,661,529.1
VAPOR FLOW @ PRES & TEMP (m³/h) 87,260.6 87,682.4 34.3 83,478.3 94,544.5 98,838.4
VAPOR MOLECULAR WEIGHT 24.47 24.47 24.47 24.64 24.58 24.37
VAPOR DEN @ PRESS &TEMP (kg/m³) 18.829 18.731 18.829 19.913 17.765 16.811
VAPOR VISCOSITY (cP) 0.014 0.014 0.014 0.014 0.015 0.015
LIQUID MASS FLOW RATE (kg/h) 2,149,458.7 1,793,801.3 1,359,906.9 1,346,838.0 5,393.9 1,341,444.1
LIQUID FLOW @ PRES & TEMP (m³/h) 2,206.3 1,462.2 1,392.0 1,364.9 5.5 1,357.6
LIQUID MOLECULAR WEIGHT 18.66 23.25 18.02 18.02 18.02 18.02
LIQUID DEN @ PRESS &TEMP (kg/m³) 974 1,227 977 987 987 988
LIQUID VISCOSITY (cP) 0.478 0.617 0.418 0.586 0.583 0.622
COMPOSITION (WT.%)
ETHYLENE 0.05 38.97 38.97 38.97 0.02 0.03 0.05 0.05 0.05 38.46 38.13 38.52
OXYGEN 0.00 7.78 7.78 7.78 0.00 0.00 0.00 0.00 0.00 7.69 7.61 7.70
ETHYLENE OXIDE 3.40 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
CARBON DIOXIDE 0.03 1.90 1.90 1.90 0.01 0.03 0.03 0.03 3.31 3.37 1.86
WATER 94.51 0.37 0.37 0.37 72.49 99.92 99.88 99.89 99.88 0.20 1.00 1.51
NITROGEN 0.00 0.36 0.36 0.36 0.00 0.00 0.00 0.00 0.00 0.36 0.35 0.36
ARGON 0.01 20.12 20.12 20.12 0.00 0.01 0.01 0.01 0.01 19.88 19.69 19.90
METHANE 0.01 29.59 29.59 29.59 0.00 0.01 0.01 0.01 0.01 29.22 28.95 29.26
ETHANE 0.00 0.91 0.91 0.91 0.00 0.00 0.00 0.00 0.00 0.90 0.89 0.90
MEG 1.97 0.00 0.00 0.00 3.07 0.01 0.01 0.01 0.01 0.00 0.00 0.00
DEG
TEG
PEG
FORMALDEHYDE 0.02 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
ACETALDEHYDE 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
K2CO3 6.29
KHCO3 18.12
TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 2 - ZERO STEAM CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 62-SD-1021
DATE: 3/11/2016

STREAM NUMBER 201 202 203 204 205 206 207 208
STREAM DESCRIPTION TOTAL REGEN LEAN REGEN REGEN. PRE- REGEN. PRE- TOTAL REGEN. REGEN.
FEED FLASH CARBONATE OVERHEAD CONDENSER CONDENSER REGEN. FEED CONDENSER CONDENSER
LIQUID SOLUTION VAPOR COND. FLASH VAPOR VENT COND.

MOLE FRACTION LIQUID 1.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0
TEMPERATURE (°C) 106 114 105 89 89 106 60 60
PRESSURE (barg) 0.99 31.7 0.41 0.30 0.30 0.99 0.2 0.2
PHASE LIQUID LIQUID VAPOR VAPOR LIQUID VAPOR VAPOR LIQUID
VAPOR MASS FLOW RATE (kg/h) 40,607.3 34,607.3 3,042.4 26,871.1
VAPOR FLOW @ PRES & TEMP (m³/h) 31,907.2 25,506.9 1,865.5 15,783.8
VAPOR MOLECULAR WEIGHT 27.95 30.89 25.37 38.89
VAPOR DEN @ PRESS &TEMP (kg/m³) 1.273 1.357 1.631 1.702
VAPOR VISCOSITY (cP) 0.017 0.017 0.016 0.016
LIQUID MASS FLOW RATE (kg/h) 1,796,329.2 1,775,788.1 6,000.0 7,736.2
LIQUID FLOW @ PRES & TEMP (m³/h) 1,464.3 1,459.3 6.2 7.9
LIQUID MOLECULAR WEIGHT 23.22 22.89 18.05 18.02
LIQUID DEN @ PRESS &TEMP (kg/m³) 1,227 1,217 965 981
LIQUID VISCOSITY (CP) 0.620 0.579 0.316 0.466
COMPOSITION (WT.%)
ETHYLENE 0.00 0.00 0.00 0.01 0.00 12.66 0.01
OXYGEN 0.38
ETHYLENE OXIDE
CARBON DIOXIDE 0.00 60.13 70.56 0.00 41.49 90.87
WATER 72.66 74.28 39.82 29.43 99.74 37.07 9.12 99.96
NITROGEN 0.01
ARGON 1.17
METHANE 7.17
ETHANE 0.04
MEG 3.07 3.10 0.05 0.01 0.26 0.00 0.04
DEG
TEG
PEG
FORMALDEHYDE
ACETALDEHYDE
K2CO3 6.51 10.90
KHCO3 17.77 11.72
TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 2 - ZERO STEAM CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 63-SD-1031
DATE: 3/11/2016

STREAM NUMBER 301 302 303 304 305 306 307 308
STREAM DESCRIPTION STRIPPING STRIPPING STRIPPING MEG COL. CYCLE WATER LEAN CYLE STRIPPING REABSORBER
COLUMN COLUMN COLUMN CONDENSER BLEED WATER COLUMN FEED
OVERHEADS BOTTOMS BOTTOMS TO E- FEED REFLUX
6312

MOLE FRACTION LIQUID 0.0 1.0 1.0 1.0 1.0 1.0 1.0 0.0
TEMPERATURE (°C) 94 105 105 105 105 33 60 59
PRESSURE (barg) 0.6 0.2 10.0 10.0 9.0 18.0 6.0 0.5
PHASE VAPOR LIQUID LIQUID LIQUID LIQUID LIQUID LIQUID VAPOR
VAPOR MASS FLOW RATE (kg/h) 111,940.0 78,351.1
VAPOR FLOW @ PRES & TEMP (m³/h) 68,770.1 35,020.7
VAPOR MOLECULAR WEIGHT 30.55 40.29
VAPOR DEN @ PRESS &TEMP (kg/m³) 1.628 2.237
VAPOR VISCOSITY (cP) 0.012 0.011
LIQUID MASS FLOW RATE (kg/h) 2,157,917.2 2,061,314.9 62,704.6 33,919.7 2,061,309.9 42,588.3
LIQUID FLOW @ PRES & TEMP (m³/h) 2,256.7 2,156.1 65.6 35.5 2,073.2 44.3
LIQUID MOLECULAR WEIGHT 18.28 18.28 18.28 18.28 18.28 19.19
LIQUID DEN @ PRESS &TEMP (kg/m³) 956 956 956 956 994 962
LIQUID VISCOSITY (CP) 0.271 0.270 0.270 0.270 0.779 0.451
COMPOSITION (WT.%)
ETHYLENE 0.94 0.00 1.34
OXYGEN 0.07 0.00 0.09
ETHYLENE OXIDE 68.07 0.00 0.00 0.00 0.00 0.00 10.29 91.66
CARBON DIOXIDE 0.54 0.00 0.00 0.00 0.00 0.00 0.00 0.78
WATER 29.88 97.93 97.93 97.93 97.93 97.93 89.66 5.43
NITROGEN 0.00 0.00
ARGON 0.19 0.27
METHANE 0.26 0.38
ETHANE 0.01 0.01
MEG 0.01 2.05 2.05 2.05 2.05 2.05 0.03 0.00
DEG 0.00 0.00 0.00 0.00 0.00
TEG 0.00 0.00 0.00 0.00 0.00
PEG 0.00 0.00 0.00 0.00 0.00
FORMALDEHYDE 0.00 0.02 0.02 0.02 0.02 0.02 0.01 0.00
ACETALDEHYDE 0.03 0.00 0.00 0.00 0.00 0.00 0.01 0.04

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 2 - ZERO STEAM CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 63-SD-1032
DATE: 3/11/2016

STREAM NUMBER 309 310 311 312 313 314 315 316
STREAM DESCRIPTION REABSORBER REABSORBER REABSORBER REABSORBER REABSORBER RECLAIM RECLAIM RECLAIM GAS
WATER OVERHEAD GROSS RECIR- NET BOTTOMS COMPRESSOR COMP'R TO CO2
BOTTOMS CULATION FEED GAS KO DRUM REMOVAL
COND

MOLE FRACTION LIQUID 1.0 0.0 1.0 1.0 1.0 0.0 1.0 0.0
TEMPERATURE (°C) 43 43 48 48 48 45 45 127
PRESSURE (barg) 6.0 0.4 0.5 5.1 5.1 0.1 0.1 20.2
PHASE LIQUID VAPOR LIQUID LIQUID LIQUID VAPOR LIQUID VAPOR
VAPOR MASS FLOW RATE (kg/h) 2,341.5 4,336.4 4,194.4
VAPOR FLOW @ PRES & TEMP (m³/h) 1,547.3 3,413.7 207.6
VAPOR MOLECULAR WEIGHT 28.3 30.0 30.7
VAPOR DEN @ PRESS &TEMP (kg/m³) 1.5 1.270 20.200
VAPOR VISCOSITY (cP) 0.013 0.013 0.018
LIQUID MASS FLOW RATE (kg/h) 489,775.1 2,666,814.1 2,098,565.1 568,266.8 1,188.8
LIQUID FLOW @ PRES & TEMP (m³/h) 495.5 2,763.3 2,174.6 588.9 1.2
LIQUID MOLECULAR WEIGHT 18.05 19.56 19.56 19.56 18.02
LIQUID DEN @ PRESS &TEMP (kg/m³) 989 965 965 965 989
LIQUID VISCOSITY (CP) 0.624 0.543 0.542 0.542 0.666
COMPOSITION (WT.%)
ETHYLENE 0.00 44.90 0.00 0.00 0.00 33.13 0.00 34.25
OXYGEN 0.00 3.15 0.00 0.00 0.00 1.97 0.00 2.04
ETHYLENE OXIDE 0.00 0.00 13.06 13.06 13.06 0.00 0.00 0.00
CARBON DIOXIDE 0.00 25.94 0.00 0.00 0.00 43.11 0.04 44.57
WATER 99.71 3.93 86.69 86.69 86.69 4.00 99.95 0.75
NITROGEN 0.00 0.08 0.00 0.00 0.00 0.05 0.00 0.05
ARGON 0.00 8.88 0.00 0.00 0.00 5.62 0.00 5.81
METHANE 0.00 12.65 0.00 0.00 0.00 11.84 0.00 12.24
ETHANE 0.00 0.45 0.00 0.00 0.00 0.28 0.00 0.28
MEG 0.29 0.00 0.25 0.25 0.25 0.00 0.00 0.00
DEG 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
TEG 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
PEG 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
FORMALDEHYDE 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
ACETALDEHYDE 0.00 0.00 0.01 0.01 0.01 0.00 0.00 0.00

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 2 - ZERO STEAM CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 65-SD-1051
DATE: 3/11/2016

STREAM NUMBER 512 530 536 538 543 544 551 554 560
STREAM DESCRIPTION TREATED TREATED EVAP. TREATING UNIT EVAP. RECYCLE EVAP. DISPLACE- TREATED
CYCLE WATER WATER CONDENSATE WASTE WATER CONDENSATE WATER HOTWELL TO MENT WATER WATER TO
TO TREATED TO RECYCLE RECYCLE RECYCLE
WATER TANK WATER TANK WATER TANK WATER TANK

MOLE FRACTION LIQUID 1.0 1.0 1.0 1.0 1.0 1.0 1.0
TEMPERATURE (°C) 43 93 60 62 43 45 35
PRESSURE (barg) 6.1 19.6 3.9 1.0 6.5 5.4 2.0
PHASE LIQUID LIQUID LIQUID LIQUID LIQUID LIQUID LIQUID
VAPOR MASS FLOW RATE (kg/h)
VAPOR FLOW @ PRES & TEMP (m³/h)
VAPOR MOLECULAR WEIGHT
VAPOR DEN @ PRESS &TEMP (kg/m³)
VAPOR VISCOSITY (cP)
LIQUID MASS FLOW RATE (kg/h) 45,186.2 51,946.2 NNF 23,650.5 416,695.5 489,775.3 62,378.0 6,760.0
LIQUID FLOW @ PRES & TEMP (m³/h) 45.5 53.8 24.1 425.3 495.5 63.2 6.8
LIQUID MOLECULAR WEIGHT 18.55 18.48 18.10 18.06 18.05 18.02 18.02
LIQUID DEN @ PRESS &TEMP (kg/m³) 992 965 982 980 988 987 991
LIQUID VISCOSITY (CP) 0.653 0.310 0.463 0.451 0.624 0.598 0.728
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 98.53 96.49 99.86 99.67 99.71 99.98 100.00
NITROGEN
ARGON
METHANE
ETHANE
MEG 1.47 3.51 0.14 0.33 0.29 0.02 0.00
DEG
TEG
PEG
FORMALDEHYDE 0.00 0.00
ACETALDEHYDE

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 2 - ZERO STEAM CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 65-SD-1052
DATE: 3/11/2016

STREAM NUMBER 501 502 503 504 505 513 528 539 552 553 574
STREAM DESCRIPTION GLYCOL FEED GLYCOL FEED EXTRACTION GLYCOL GLYCOL ALDEHYDE EVAPORATOR ALDEHYDE EXTRACTION WASTE WATER EVAPORATOR
STRIPPER STRIPPER STEAM TO REACTOR REACTOR STRIPPER CONDENSATE PURGE STEAM TO VOC STRIPPER COND. TO
OVERHEADS BOTTOMS GLYCOL FEED FEED OUTLET OVERHEAD E-6521 OVERHEAD REABSORBER
STRIPPER BTMS HEATER

MOLE FRACTION LIQUID 0.0 1.0 0.0 1.0 1.0 0.0 1.0 1.0 0.0 0.0 1.0
TEMPERATURE (°C) 50 55 124 132 195 173 101 45 124 133 62
PRESSURE (barg) 0.5 0.5 1.2 22.0 22.0 7.7 4.4 2.1 1.2 2.0 0.1
PHASE VAPOR LIQUID VAPOR LIQUID LIQUID VAPOR LIQUID LIQUID VAPOR VAPOR LIQUID
VAPOR MASS FLOW RATE (kg/h) 2,481.1 6,328.8 12,620.9 27,882.6 2,235.9
VAPOR FLOW @ PRES & TEMP (m³/h) 1,053.9 5,248.6 2,868.9 23,123.5 1,377.5
VAPOR MOLECULAR WEIGHT 41.95 18.05 18.04 18.05 18.15
VAPOR DEN @ PRESS &TEMP (kg/m³) 2.354 1.206 4.399 1.206 1.623
VAPOR VISCOSITY (cP) 0.010 0.013 0.015 0.013 0.013
LIQUID MASS FLOW RATE (kg/h) 572,519.1 572,519.4 572,519.4 416,693.8 11,585.0 416,695.5
LIQUID FLOW @ PRES & TEMP (m³/h) 595.3 642.0 643.8 435.2 11.7 425.4
LIQUID MOLECULAR WEIGHT 19.50 19.50 20.64 18.06 18.02 18.06
LIQUID DEN @ PRESS &TEMP (kg/m³) 962 892 889 957 987 980
LIQUID VISCOSITY (CP) 0.486 0.203 0.154 0.278 0.600 0.450
COMPOSITION (WT.%)
ETHYLENE 0.16 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
OXYGEN 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
ETHYLENE OXIDE 95.69 12.54 0.00 12.54 0.00 0.00 0.00 0.00 0.00 0.00 0.00
CARBON DIOXIDE 0.71 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
WATER 3.38 87.21 99.71 87.21 82.48 99.75 99.67 99.98 99.71 98.70 99.67
NITROGEN 0.00 0.00
ARGON 0.01
METHANE 0.02
ETHANE 0.00
MEG 0.00 0.25 0.29 0.25 15.22 0.02 0.33 0.02 0.29 0.00 0.33
DEG 2.15
TEG 0.14
PEG 0.02
FORMALDEHYDE
ACETALDEHYDE 0.03 0.23 0.00 0.00 0.00 1.29 0.00

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 2 - ZERO STEAM CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 65-SD-1053
DATE: 3/11/2016

STREAM NUMBER 505 506 509 510 511 513 514 515 516 517 518 521 530 531 532 533
STREAM DESCRIPTION GLYCOL 1ST EFFECT 2ND EFFECT 1ST EFFECT 2ND EFFECT ALDEHYDE ALDEHYDE 3RD EFFECT 2ND EFFECT 2ND EFFECT 3RD EFFECT 3RD EFFECT TREATED FIRST EFFECT 2ND EFFECT 3RD EFFECT
REACTOR OVERHEAD CONDENSATE BOTTOMS OVERHEAD STRIPPER STRIPPER REB. NON- REB. BOTTOMS OVERHEADS BOTTOMS WATER REFLUX REFLUX REFLUX
OUTLET OVERHEAD BOTTOMS CONDENSIBLE ALDEHYDE
VENT PURGE

MOLE FRACTION LIQUID 1.0 0.0 1.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 1.0 1.0 1.0 1.0 1.0
TEMPERATURE (°C) 195 185 185 188 178 173 173 178 185 181 171 174 93 93 93 93
PRESSURE (barg) 22.0 10.4 10.4 10.4 8.6 7.7 7.7 8.6 10.4 8.7 7.1 7.1 19.6 19.6 19.6 19.6
PHASE LIQUID VAPOR LIQUID LIQUID VAPOR VAPOR LIQUID VAPOR VAPOR LIQUID VAPOR LIQUID LIQUID LIQUID LIQUID LIQUID
VAPOR MASS FLOW RATE (kg/h) 46,049.3 51,594.6 12,620.9 500.0 1,000.0 56,693.5
VAPOR FLOW @ PRES & TEMP (m³/h) 8,125.6 10,690.8 2,868.9 103.6 175.7 13,847.7
VAPOR MOLECULAR WEIGHT 18.06 18.06 18.04 18.02 18.11 18.06
VAPOR DEN @ PRESS &TEMP (kg/m³) 5.667 4.826 4.399 4.825 5.691 4.094
VAPOR VISCOSITY (cP) 0.016 0.015 0.015 0.015 0.016 0.015
LIQUID MASS FLOW RATE (kg/h) 572,519.4 45,049.3 542,941.9 94,524.8 497,347.3 446,653.9 51,946.2 6,000.0 6,000.0 6,000.0
LIQUID FLOW @ PRES & TEMP (m³/h) 643.8 50.9 603.4 105.4 547.0 486.2 53.8 6.2 6.2 6.2
LIQUID MOLECULAR WEIGHT 20.64 18.06 21.15 18.06 21.49 21.97 18.48 18.48 18.48 18.48
LIQUID DEN @ PRESS &TEMP (kg/m³) 889 885 900 897 909 919 965 965 965 965
LIQUID VISCOSITY (CP) 0.154 0.143 0.164 0.153 0.175 0.186 0.310 0.310 0.310 0.310
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 82.48 99.63 99.64 79.58 99.68 99.75 99.68 99.93 99.17 77.70 99.65 75.17 96.49 96.49 96.49 96.49
NITROGEN
ARGON
METHANE
ETHANE
MEG 15.22 0.31 0.32 17.82 0.32 0.02 0.32 0.02 0.02 19.46 0.35 21.68 3.51 3.51 3.51 3.51
DEG 2.15 2.43 2.65 0.00 2.96
TEG 0.14 0.15 0.16 0.00 0.18
PEG 0.02 0.02 0.02 0.00 0.02
FORMALDEHYDE
ACETALDEHYDE 0.06 0.04 0.23 0.05 0.81

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 2 - ZERO STEAM CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 65-SD-1054
DATE: 3/11/2016

STREAM NUMBER 514 518 519 520 521 522 523 524 525 526 529 534 535 537 561
STREAM DESCRIPTION ALDEHYDE 3RD EFFECT 4TH EFFECT 4TH EFFECT 3RD EFFECT 4TH EFFECT 5TH EFFECT 5TH EFFECT 4TH EFFECT 5TH EFFECT 5TH EFFECT 4TH EFFECT 5TH EFFECT EXTRACTION EXTRACTION
STRIPPER OVERHEADS REB. NON- CONDENSATE BOTTOMS OVERHEADS REB. NON- CONDENSATE BOTTOMS OVERHEADS BOTTOMS REFLUX REFLUX STEAM TO STEAM TO
BOTTOMS CONDENSIBLE CONDENSIBLE 6TH EFFECT E-6522
VENT VENT REBOILER

MOLE FRACTION LIQUID 1.0 0.0 0.0 1.0 1.0 0.0 0.0 1.0 1.0 0.0 1.0 1.0 1.0 0.0 0.0
TEMPERATURE (°C) 173 171 170 170 174 164 163 163 167 155 159 93 93 155 155
PRESSURE (barg) 7.7 7.1 7.1 7.1 7.1 5.7 5.7 5.7 5.7 4.3 4.4 19.6 19.6 4.3 4.3
PHASE LIQUID VAPOR VAPOR LIQUID LIQUID VAPOR VAPOR LIQUID LIQUID VAPOR LIQUID LIQUID LIQUID VAPOR VAPOR
VAPOR MASS FLOW RATE (kg/h) 56,693.5 500.0 61,669.5 500.0 68,313.9 68,313.9 0.0
VAPOR FLOW @ PRES & TEMP (m³/h) 13,847.7 122.2 17,927.5 145.4 24,618.7 24,618.7 0.0
VAPOR MOLECULAR WEIGHT 18.06 18.02 18.06 18.02 18.07 18.07 18.07
VAPOR DEN @ PRESS &TEMP (kg/m³) 4.094 4.092 3.440 3.438 2.775 2.775 2.775
VAPOR VISCOSITY (cP) 0.015 0.015 0.015 0.015 0.014 0.014 0.014
LIQUID MASS FLOW RATE (kg/h) 94,524.8 150,718.2 446,653.9 211,891.8 390,984.3 328,670.4 6,000.0 6,000.0
LIQUID FLOW @ PRES & TEMP (m³/h) 105.4 167.4 486.2 233.4 421.0 349.2 6.2 6.2
LIQUID MOLECULAR WEIGHT 18.06 18.06 21.97 18.06 22.68 23.85 18.48 18.48
LIQUID DEN @ PRESS &TEMP (kg/m³) 897 900 919 908 929 941 965 965
LIQUID VISCOSITY (CP) 0.153 0.156 0.186 0.164 0.202 0.226 0.310 0.310
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 99.68 99.65 99.98 99.67 75.17 99.63 99.98 99.66 71.64 99.59 66.28 96.49 96.49 99.59 99.59
NITROGEN
ARGON
METHANE
ETHANE
MEG 0.32 0.35 0.02 0.33 21.68 0.37 0.02 0.34 24.76 0.41 29.43 3.51 3.51 0.41 0.41
DEG 2.96 3.38 0.00 4.02
TEG 0.18 0.21 0.00 0.24
PEG 0.02 0.02 0.00 0.03
FORMALDEHYDE
ACETALDEHYDE 0.00 0.00

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 2 - ZERO STEAM CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 65-SD-1055
DATE: 3/11/2016

STREAM NUMBER 503 524 529 537 546 552 562 563 564 565 566 567 568 569 570 571 572 573 576
STREAM DESCRIPTION EXTRACTION 5TH EFFECT 5TH EFFECT EXTRACTION EXTRACTION EXTRACTION 6TH EFFECT 6TH EFFECT 6TH EFFECT 7TH EFFECT 7TH EFFECT 7TH EFFECT 6TH EFFECT 7TH EFFECT EXTRACTION 6TH EFFECT 7TH EFFECT EXTRACTION EXTRACTION
STEAM TO CONDENSATE BOTTOMS STEAM TO STEAM TO STEAM TO CONDENSATE OVERHEADS BOTTOMS CONDENSATE OVERHEADS BOTTOMS REFLUX REFLUX STEAM TO REB. NON- REB. NON- STEAM TO STEAM TO
GLYCOL FEED 6TH EFFECT STRIPPING E-6521 8TH EFFECT CONDENSIBLE CONDENSIBLE E-6223 7TH EFFECT
STRIPPER REBOILER COLUMN REBOILER VENT VENT REBOILER

MOLE FRACTION LIQUID 0.0 1.0 1.0 0.0 0.0 0.0 1.0 0.0 1.0 1.0 0.0 1.0 1.0 1.0 0.0 0.0 0.0 0.0 0.0
TEMPERATURE (°C) 124 163 159 155 124 124 154 142 148 141 124 134 93 93 124 154 141 142 142
PRESSURE (barg) 1.2 5.7 4.4 4.3 1.2 1.2 4.3 2.8 2.8 2.8 1.2 1.2 19.6 19.6 1.2 4.3 2.8 2.8 2.8
PHASE VAPOR LIQUID LIQUID VAPOR VAPOR VAPOR LIQUID VAPOR LIQUID LIQUID VAPOR LIQUID LIQUID LIQUID VAPOR VAPOR VAPOR VAPOR VAPOR
VAPOR MASS FLOW RATE (kg/h) 6,328.8 68,313.9 20,398.4 27,882.6 76,640.0 88,075.2 33,465.4 500.0 500.0 0.0 76,640.0
VAPOR FLOW @ PRES & TEMP (m³/h) 5,248.6 24,618.7 16,916.7 23,123.5 38,129.0 73,038.7 27,752.1 180.2 248.8 0.0 38,129.0
VAPOR MOLECULAR WEIGHT 18.05 18.07 18.05 18.05 18.05 18.05 18.05 18.02 18.02 18.05 18.05
VAPOR DEN @ PRESS &TEMP (kg/m³) 1.206 2.775 1.206 1.206 2.010 1.206 1.206 2.774 2.010 2.010 2.010
VAPOR VISCOSITY (cP) 0.013 0.014 0.013 0.013 0.014 0.013 0.013 0.014 0.014 0.014 0.014
LIQUID MASS FLOW RATE (kg/h) 211,891.8 328,670.4 279,705.7 262,030.3 355,845.8 185,901.3 10,000.0 11,946.2
LIQUID FLOW @ PRES & TEMP (m³/h) 233.4 349.2 305.3 273.2 383.4 188.2 10.4 12.4
LIQUID MOLECULAR WEIGHT 18.06 23.85 18.06 26.00 18.06 31.81 18.48 18.48
LIQUID DEN @ PRESS &TEMP (kg/m³) 908 941 916 959 928 988 965 965
LIQUID VISCOSITY (CP) 0.164 0.226 0.175 0.273 0.193 0.402 0.310 0.310
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 99.71 99.66 66.28 99.59 99.71 99.71 99.64 99.73 57.65 99.66 99.71 40.22 96.49 96.49 99.71 99.98 99.99 99.73 99.73
NITROGEN
ARGON
METHANE
ETHANE
MEG 0.29 0.34 29.43 0.41 0.29 0.29 0.36 0.27 36.97 0.34 0.29 52.20 3.51 3.51 0.29 0.02 0.01 0.27 0.27
DEG 4.02 5.04 0.00 7.10
TEG 0.24 0.31 0.00 0.43
PEG 0.03 0.03 0.00 0.05
FORMALDEHYDE
ACETALDEHYDE 0.00 0.00

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 2 - ZERO STEAM CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 65-SD-1056
DATE: 3/11/2016

STREAM NUMBER 527 528 540 541 542 545 548 549 550 551 567 570
STREAM DESCRIPTION 8TH EFFECT EVAPORATOR 8TH EFFECT 8TH EFFECT 8TH EFFECT CRUDE EVAPORATOR 8TH EFFECT EVAP. EVAP. 7TH EFFECT EXTRACTION
REB. NON- CONDENSATE OVERHEAD CONDENSER CONDENSER GLYCOL HOTWELL REFLUX HOTWELL TO HOTWELL TO BOTTOMS STEAM TO
CONDENSIBLE VENT CONDENSATE CONDENSATE DRYING COL. RECYCLE 8TH EFFECT
VENT REFLUX WATER TANK REBOILER

MOLE FRACTION LIQUID 0.0 1.0 0.0 0.0 1.0 1.0 1.0 1.0 1.0 1.0 0.0
TEMPERATURE (°C) 101 101 59 45 45 91 45 45 45 134 124
PRESSURE (barg) 0.1 4.4 140 mm Hg 140 mm Hg 0.1 7.4 5.4 5.4 5.4 1.2 1.2
PHASE VAPOR LIQUID VAPOR VAPOR LIQUID LIQUID LIQUID LIQUID LIQUID LIQUID VAPOR
VAPOR MASS FLOW RATE (kg/h) 500.0 73,537.8 129.4 33,465.4
VAPOR FLOW @ PRES & TEMP (m³/h) 812.7 601,211.5 970.9 27,752.1
VAPOR MOLECULAR WEIGHT 18.02 18.02 22.02 18.05
VAPOR DEN @ PRESS &TEMP (kg/m³) 0.615 0.122 0.133 1.206
VAPOR VISCOSITY (cP) 0.012 0.010 0.014 0.013
LIQUID MASS FLOW RATE (kg/h) 416,693.8 73,408.4 123,459.9 73,408.4 11,030.3 62,378.0 185,901.3
LIQUID FLOW @ PRES & TEMP (m³/h) 435.2 74.3 117.3 74.3 11.2 63.2 188.2
LIQUID MOLECULAR WEIGHT 18.06 18.02 51.90 18.02 18.02 18.02 31.81
LIQUID DEN @ PRESS &TEMP (kg/m³) 957 987 1,052 987 987 987 988
LIQUID VISCOSITY (CP) 0.278 0.600 1.590 0.598 0.598 0.598 0.402
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 100.00 99.67 99.91 49.04 100.00 10.00 100.00 100.00 100.00 40.22 99.71
NITROGEN 0.09 50.96
ARGON
METHANE
ETHANE
MEG 0.33 78.59 52.20 0.29
DEG 10.69 7.10
TEG 0.65 0.43
PEG 0.07 0.05
FORMALDEHYDE
ACETALDEHYDE 0.00

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 2 - ZERO STEAM CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 66-SD-1061
DATE: 3/11/2016

STREAM NUMBER 601 602 603 604 613 616 617

STREAM DESCRIPTION DRYING DRYING DRYING DRYING VAPOR TO DRYING DRYING
COLUMN COLUMN COLUMN COLUMN EJ-6612 COLUMN COLUMN
OVERHEADS BOTTOMS REFLUX CONDENSATE CONDENSER HOTWELL
TO WASTE CONDENSATE LIQUID

MOLE FRACTION LIQUID 0.0 1.0 1.0 1.0 0.0 1.0 1.0
TEMPERATURE (°C) 59 164 45 45 45 45 45
PRESSURE (barg) 140 mm Hg 5.0 5.4 4.6 105 mm Hg 0.1 4.6
PHASE VAPOR LIQUID LIQUID LIQUID VAPOR LIQUID LIQUID
VAPOR MASS FLOW RATE (kg/h) 21,147.8 271.7
VAPOR FLOW @ PRES & TEMP (m³/h) 172,584.3 2,485.3
VAPOR MOLECULAR WEIGHT 18.05 21.04
VAPOR DEN @ PRESS &TEMP (kg/m³) 0.123 0.109
VAPOR VISCOSITY (cP) 0.010 0.013
LIQUID MASS FLOW RATE (kg/h) 111,113.0 8,691.9 15,388.7 23,876.1 24,080.6
LIQUID FLOW @ PRES & TEMP (m³/h) 110.9 8.8 15.6 24.2 24.4
LIQUID MOLECULAR WEIGHT 65.62 18.02 18.02 18.02 18.02
LIQUID DEN @ PRESS &TEMP (kg/m³) 1,002 987 987 987 987
LIQUID VISCOSITY (CP) 1.003 0.598 0.598 0.600 0.600
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 99.48 0.00 99.99 99.99 59.81 99.99 99.99
NITROGEN 0.52 0.00 0.00 0.00 40.11 0.00 0.00
ARGON
METHANE
ETHANE
MEG 0.00 87.32 0.01 0.01 0.00 0.01 0.01
DEG 0.00 11.88 0.00 0.00 0.00 0.00 0.00
TEG 0.00 0.72 0.00 0.00 0.00 0.00 0.00
PEG 0.00 0.08 0.00 0.00 0.00 0.00 0.00
FORMALDEHYDE 0.00 0.00 0.00 0.00 0.00 0.00 0.00
ACETALDEHYDE 0.00 0.00 0.00 0.00 0.08 0.00 0.00

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 2 - ZERO STEAM CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 66-SD-1062
DATE: 9/7/2016
(R-3)
STREAM NUMBER 605 606 607 608 618 619 624
STREAM DESCRIPTION MEG COLUMN MEG COLUMN MEG COLUMN MEG MEG COLUMN MEG COLUMN MEG COLUMN
OVERHEADS BOTTOMS VAPOR PRODUCT TO CONDENSER CONDENSER REFLUX
DISTILLATE CRUDE STEAM BLOWDOWN
GLYCOL
HEATER
MOLE FRACTION LIQUID 0.0 1.0 0.0 1.0 0.0 1.0 1.0
TEMPERATURE (°C) 143 170 135 144 121 121 135
PRESSURE (barg) 110 mm Hg 5.1 85 mm Hg 4.5 1.0 9.2 5.8
PHASE VAPOR LIQUID VAPOR LIQUID VAPOR LIQUID LIQUID
VAPOR MASS FLOW RATE (kg/h) 124,556.3 5,043.3 51,428.1
VAPOR FLOW @ PRES & TEMP (m³/h) 471,875.8 25,355.3 46,670.1
VAPOR MOLECULAR WEIGHT 61.95 59.32 18.06
VAPOR DEN @ PRESS &TEMP (kg/m³) 0.264 0.199 1.102
VAPOR VISCOSITY (cP) 0.012 0.012 0.013
LIQUID MASS FLOW RATE (kg/h) 18,757.7 87,500.0 11,276.4 119,513.1
LIQUID FLOW @ PRES & TEMP (m³/h) 18.7 85.9 11.8 116.5
LIQUID MOLECULAR WEIGHT 91.16 62.09 19.39 62.07
LIQUID DEN @ PRESS &TEMP (kg/m³) 1,002 1,018 952 1,026
LIQUID VISCOSITY (CP) 1.064 1.189 0.250 1.307
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 0.00 0.00 0.00 0.00 99.67 89.97
NITROGEN 0.15 0.00 3.81 0.00 0.00 0.00
ARGON
METHANE
ETHANE
MEG 99.84 25.19 96.19 99.98 0.31 10.00 100.00
DEG 0.00 70.07 0.00 0.02 0.00 0.00 0.00
TEG 0.00 4.28 0.00 0.00 0.00 0.00 0.00
PEG 0.00 0.46 0.00 0.00 0.00 0.00 0.00
FORMALDEHYDE 0.00 0.00 0.00 0.00 0.01 0.03 0.00
ACETALDEHYDE 0.00 0.00 0.00 0.00 0.00 0.00 0.00

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 2 - ZERO STEAM CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 66-SD-1063
DATE: 3/11/2016

STREAM NUMBER 608 627

STREAM DESCRIPTION MEG MEG PRODUCT
PRODUCT TO (PUMP-OUT
CRUDE RATE)
GLYCOL
HEATER
MOLE FRACTION LIQUID 1.0 1.0
TEMPERATURE (°C) 144 48
PRESSURE (barg) 4.5 7.7
PHASE LIQUID LIQUID
VAPOR MASS FLOW RATE (kg/h)
VAPOR FLOW @ PRES & TEMP (m³/h)
VAPOR MOLECULAR WEIGHT
VAPOR DEN @ PRESS &TEMP (kg/m³)
VAPOR VISCOSITY (cP)
LIQUID MASS FLOW RATE (kg/h) 87,500.0 264,700.0
LIQUID FLOW @ PRES & TEMP (m³/h) 85.92 242.0
LIQUID MOLECULAR WEIGHT 62.09 62.09
LIQUID DEN @ PRESS &TEMP (kg/m³) 1018.39 1,093
LIQUID VISCOSITY (CP) 1.19 7.010
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 0.00 0.00
NITROGEN
ARGON
METHANE
ETHANE
MEG 99.98 99.98
DEG 0.02 0.02
TEG 0.00 0.00
PEG 0.00 0.00
FORMALDEHYDE 0.00 0.00
ACETALDEHYDE

TOTAL (WT.%) 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 2 - ZERO STEAM CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 66-SD-1064
DATE: 3/11/2016

STREAM NUMBER 609 610 615 622 625

STREAM DESCRIPTION MEG COLUMN MEG COLUMN MEG COLUMN MEG COLUMN MEG COLUMN
PRE- VACUUM PUMP VACUUM PUMP LIGHTS VACUUM PUMP
CONDENSATE BLEED BLEED RECYCLE VENT

MOLE FRACTION LIQUID 1.0 1.0 1.0 0.0

TEMPERATURE (°C) 45 45 72 45
PRESSURE (barg) 0.1 0.1 19.0 0.1
PHASE LIQUID LIQUID LIQUID VAPOR
VAPOR MASS FLOW RATE (kg/h) 192.3
VAPOR FLOW @ PRES & TEMP (m³/h) 164.7
VAPOR MOLECULAR WEIGHT 28.04
VAPOR DEN @ PRESS &TEMP (kg/m³) 1.168
VAPOR VISCOSITY (cP) 0.019
LIQUID MASS FLOW RATE (kg/h) 4,843.8 6.2 10,472.0
LIQUID FLOW @ PRES & TEMP (m³/h) 4.4 0.0 9.7
LIQUID MOLECULAR WEIGHT 62.07 62.05 64.37
LIQUID DEN @ PRESS &TEMP (kg/m³) 1,097 1,097 1,077
LIQUID VISCOSITY (CP) 7.734 7.728 3.710
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 0.00 0.00 0.00 0.00
NITROGEN 0.00 0.01 0.00 99.81
ARGON
METHANE
ETHANE
MEG 100.00 99.98 91.41 0.19
DEG 0.00 0.00 8.56 0.00
TEG 0.00 0.00 0.03 0.00
PEG 0.00 0.00 0.00 0.00
FORMALDEHYDE 0.00 0.00 0.00 0.00
ACETALDEHYDE

TOTAL (WT.%) 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 2 - ZERO STEAM CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 66-SD-1065
DATE: 3/11/2016

STREAM NUMBER 611 612 614 620 621 626

STREAM DESCRIPTION MEG MEG SPLITTER MEG SPLITTER MEG SPLITTER EJ-6632A MEG SPLITTER
SPLITTER BOTTOMS VENT TO VACUUM PUMP AFTERSTAGE VACUUM PUMP
SIDEDRAW EJ-6632 BLEED CONDENSATE VENT

MOLE FRACTION LIQUID 1.0 1.0 0.0 1.0 0.0

TEMPERATURE (°C) 92 175 50 45 45
PRESSURE (barg) 0.1 5.1 7 mm Hg 0.1 0.1
PHASE LIQUID LIQUID VAPOR LIQUID VAPOR
VAPOR MASS FLOW RATE (kg/h) 67.6 100.2
VAPOR FLOW @ PRES & TEMP (m³/h) 5,954.8 85.8
VAPOR MOLECULAR WEIGHT 32.69 28.04
VAPOR DEN @ PRESS &TEMP (kg/m³) 0.011 1.168
VAPOR VISCOSITY (cP) 0.017 0.019
LIQUID MASS FLOW RATE (kg/h) 5,605.2 13,140.6 16.9
LIQUID FLOW @ PRES & TEMP (m³/h) 5.3 13.1 0.0
LIQUID MOLECULAR WEIGHT 66.51 108.37 62.12
LIQUID DEN @ PRESS &TEMP (kg/m³) 1,062 1,000 1,097
LIQUID VISCOSITY (CP) 2.507 1.090 7.735
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 0.00 0.00 0.00 0.00 0.00
NITROGEN 0.00 0.00 73.95 0.01 99.81
ARGON
METHANE
ETHANE
MEG 83.95 0.02 25.99 99.76 0.19
DEG 16.00 93.23 0.06 0.23 0.00
TEG 0.05 6.09 0.00 0.00 0.00
PEG 0.00 0.66 0.00 0.00 0.00
FORMALDEHYDE
ACETALDEHYDE

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 2 - ZERO STEAM CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 67-SD-1071
DATE: 3/11/2016

STREAM NUMBER 701 704 705 706 709 711 714 715 716
STREAM DESCRIPTION DEG DEG COLUMN DEG COLUMN DEG/TEG DEG DEG/TEG DEG/TEG DEG DEG PRODUCT
PRODUCT CATCHPAN BOTTOMS EJECTOR CONDENSER COLUMN COLUMN HOTWELL (PUMP-OUT
PURGE INTER- VENT VACUUM PUMP VAUUM PUMP CONDENSATE RATE)
CONDENSATE BLEED VENT

MOLE FRACTION LIQUID 1.0 1.0 1.0 0.0 1.0 0.0 1.0 1.0
TEMPERATURE (°C) 48 128 177 50 45 45 45 48
PRESSURE (barg) 4.8 0.1 5.8 7 mm Hg 0.1 0.1 0.1 5.9
PHASE LIQUID LIQUID LIQUID VAPOR LIQUID VAPOR LIQUID LIQUID
VAPOR MASS FLOW RATE (kg/h) 84.0 194.2
VAPOR FLOW @ PRES & TEMP (m³/h) 5,888.6 166.4
VAPOR MOLECULAR WEIGHT 28.73 28.03
VAPOR DEN @ PRESS &TEMP (kg/m³) 0.014 1.167
VAPOR VISCOSITY (cP) 0.019 0.019
LIQUID MASS FLOW RATE (kg/h) 12,142.7 107.1 984.7 2.9 4.3 82,471.1
LIQUID FLOW @ PRES & TEMP (m³/h) 11.0 0.1 1.0 0.0 0.0 75.0
LIQUID MOLECULAR WEIGHT 106.12 105.18 153.01 90.99 84.57 106.12
LIQUID DEN @ PRESS &TEMP (kg/m³) 1,100 1,038 1,013 1,100 1,100 1,100
LIQUID VISCOSITY (CP) 11.866 1.761 1.242 11.164 10.367 11.866
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00
NITROGEN 0.00 0.00 0.00 96.48 0.03 99.92 0.02 0.00
ARGON
METHANE
ETHANE
MEG 0.01 1.25 0.00 0.45 23.51 0.06 36.80 0.01
DEG 99.99 98.74 0.35 3.07 75.91 0.02 60.78 99.99
TEG 0.00 0.00 90.83 0.00 0.54 0.00 2.39 0.00
PEG 0.00 0.00 8.82 0.00 0.00 0.00 0.00 0.00
FORMALDEHYDE
ACETALDEHYDE

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 2 - ZERO STEAM CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 67-SD-1072
DATE: 3/11/2016

STREAM NUMBER 702 707 708 710 717

STREAM DESCRIPTION TEG TEG COLUMN TEG COLUMN TEG TEG PRODUCT
PRODUCT BOTTOMS TO CATCHPAN CONDENSER (PUMP-OUT
OSBL VENT RATE)
INCINERATOR

MOLE FRACTION LIQUID 1.0 1.0 1.0 0.0 1.0

TEMPERATURE (°C) 48 86 146 50 48
PRESSURE (barg) 3.4 5.5 0.1 7 mm Hg 5.9
PHASE LIQUID LIQUID LIQUID VAPOR LIQUID
VAPOR MASS FLOW RATE (kg/h) 16.1
VAPOR FLOW @ PRES & TEMP (m³/h) 1,152.9
VAPOR MOLECULAR WEIGHT 28.19
VAPOR DEN @ PRESS &TEMP (kg/m³) 0.014
VAPOR VISCOSITY (cP) 0.019
LIQUID MASS FLOW RATE (kg/h) 712.5 173.6 98.5 15,529.9
LIQUID FLOW @ PRES & TEMP (m³/h) 0.6 0.2 0.1 14.0
LIQUID MOLECULAR WEIGHT 150.15 169.38 148.18 150.15
LIQUID DEN @ PRESS &TEMP (kg/m³) 1,109 1,082 1,037 1,109
LIQUID VISCOSITY (CP) 14.370 4.604 1.686 14.370
COMPOSITION (WT.%)
ETHYLENE
OXYGEN
ETHYLENE OXIDE
CARBON DIOXIDE
WATER
NITROGEN 0.00 0.00 0.00 99.22 0.00
ARGON
METHANE
ETHANE
MEG 0.00 0.00 0.00 0.00 0.00
DEG 0.03 0.00 3.24 0.14 0.03
TEG 99.97 50.00 96.76 0.63 99.97
PEG 0.00 50.00 0.00 0.00 0.00
FORMALDEHYDE
ACETALDEHYDE

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

SCIENTIFIC DESIGN COMPANY, INC.
CLIENT: JUPC EG-III
PROCESS: ETHYLENE GLYCOLS
PROJECT: 53133
MATERIAL BALANCE: CASE 2 - ZERO STEAM CASE @ EOR
CAPACITY: 700,000 MTPY MEG / 0 MTPY EO
PFD: 69-SD-1093
DATE: 3/11/2016

STREAM NUMBER 315 538 539 604 715 901 902

STREAM DESCRIPTION RECLAIM TREATING UNIT ALDEHYDE DRYING DEG WASTE WASTE
COMP'R WASTE WATER PURGE COLUMN HOTWELL WATER TO WATER TO
KO DRUM CONDENSATE CONDENSATE OSBL OSBL
COND TO WASTE

MOLE FRACTION LIQUID 1.0 1.0 1.0 1.0 1.0 1.0 1.0
TEMPERATURE (°C) 45.0 60 45 45 45 45 60
PRESSURE (barg) 3.0 3.9 2.1 4.6 0.1 8.0 8.0
PHASE LIQUID LIQUID LIQUID LIQUID LIQUID LIQUID LIQUID
VAPOR MASS FLOW RATE (kg/h)
VAPOR FLOW @ PRES & TEMP (m³/h)
VAPOR MOLECULAR WEIGHT
VAPOR DEN @ PRESS &TEMP (kg/m³)
VAPOR VISCOSITY (cP)
LIQUID MASS FLOW RATE (kg/h) 1,188.8 23,650.5 11,585.0 15,388.7 4.3 28,166.8 23,650.5
LIQUID FLOW @ PRES & TEMP (m³/h) 1.2 24.1 11.7 15.6 0.0 28.4 24.1
LIQUID MOLECULAR WEIGHT 18.02 18.10 18.02 18.02 84.57 18.03 18.10
LIQUID DEN @ PRESS &TEMP (kg/m³) 989 982 987 987 1100 990 983
LIQUID VISCOSITY (CP) 0.666 0.463 0.600 0.598 10.367 0.598 0.466
COMPOSITION (WT.%)
ETHYLENE 0.00
OXYGEN 0.00
ETHYLENE OXIDE 0.00
CARBON DIOXIDE 0.04
WATER 99.95 99.86 99.98 99.99 0.00 99.97 99.97
NITROGEN 0.00 0.00 0.00 0.00 0.02 0.00 0.00
ARGON 0.00
METHANE 0.00
ETHANE 0.00
MEG 0.00 0.14 0.02 0.01 36.80 0.02 0.02
DEG 0.00 0.00 0.00 0.00 60.78 0.01 0.01
TEG 0.00 0.00 0.00 0.00 2.39 0.00 0.00
PEG 0.00 0.00 0.00 0.00 0.00 0.00 0.00
FORMALDEHYDE 0.00 0.00 0.00 0.00 0.00 0.00 0.00
ACETALDEHYDE 0.00 0.00 0.00 0.00 0.00 0.00 0.00

TOTAL (WT.%) 100.00 100.00 100.00 100.00 100.00 100.00 100.00

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
SABIC – Clariant Partnership Company

SD Project No. 53133

2.3

UTILITY FLOW DIAGRAMS

INDEX
Page

A. STEAM GRID FLOW DIAGRAMS 2.3 - 1

B. COOLING WATER FLOW DIAGRAM 2.3 - 2

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
SABIC – Clariant Partnership Company

SD Project No. 53133

Page 2.3 - 1

A. STEAM GRID FLOW DIAGRAMS

Flowsheet No. Flowsheet Title

69-SD-1101 (Sheet 1) Steam Grid: Start-of-Run (DESIGN)

69-SD-1101 (Sheet 2) Steam Grid: End-of-Run (DESIGN)

69-SD-1101 (Sheet 3) Steam Grid: Start-of-Run (“ZERO STEAM”)

69-SD-1101 (Sheet 4) Steam Grid: End-of-Run (“ZERO STEAM”)

Confidential Information of Scientific Design Company, Inc.

 A B C D E F G H J K

7000
44.8 NOTES:
HP STEAM 400 259
8200 FOR START-UP ONLY 1. START-OF-RUN DESIGN CASE STEAM GRID FOR PLANT CAPACITY OF
OSBL
548 500 TONS EOE (700 000 TONS MEG) PER YEAR BASED ON 8000
OPERATING HOURS PER YEAR.
80 850
271
2. FLOWRATES ARE IN kg/h.
MP STEAM 86 040
1 OSBL 1
97 360
220
21.4

1200 29.6
84 080 7250 65 230 3190 5810 640 0 10 000
5180 21.4 21.4
REACTOR
FIRST MEG STEAM DRUMS
MEG COLUMN MEG DEG TEG EJECTORS ALDEHYDE
EFFECT SPLITTER COLUMN COLUMN V-6110
REBOILER COLUMN EJ-6612A, EJ-6622A, STRIPPER
15 380 REBOILER REBOILER REBOILER REBOILER V-6120
PREHEATER REBOILER EJ-6632A, EJ-6712A C-6560
E-6531 E-6624 E-6630 E-6710 E-6720
E-6620
6690 99 350
105 214
DESUPERHEATER WATER
OSBL 166 200
38 000
235

15.6
11 440
2 0 27 870 25 520 2
13.3 REACTOR
310 10
GAS COOLER
38 780 E-6920A/B
DRYING FOURTH STAGE STEAM DRUMS
COLUMN REACTOR FEED 194 070 V-6112
REBOILER HEATER V-6122 165
E-6610 E-6524 184 PRESSURE (barg)
182 630
5
3330 192 160
LP STEAM TEMPERATURE - oC
139
OSBL 1.0
203 1990
250 152
2000
780

1000 1.0
3640

8110
3 V-6920 138 130 3
120
0 120
0 3200 105
0 2000 5680 2000 1200 BFW
8690 580 2770
4 OSBL
1.0
GLYCOL REGENERATOR
11 890
60 570 STRIPPING FEED EXTRACTION
COLUMN WASTE WATER
STRIPPER REBOILER STRIPPING
23 000 C-6310 COLUMN REGENERATOR REGENERATOR VOC
C-6510 E-6223 REBOILER MISCELLANEOUS 183 200
1.1 1.0 REBOILER C-6220 STRIPPER
E-6310 E-6220 C-6570 REFERENCE DRAWING TITLE
14 700 13 420
SIXTH EFFECT 120
TO DEMINERALIZER
EVAPORATOR 8690 2190
91 830 18 650 45 960 OSBL
C-6536

43 850 CLEAN CONDENSATE

29-SD-1093
FIRST STAGE EIGHTH 147 P-6930A/B TO E-6960
FIFTH SEVENTH E-6930
EFFECT MEG COLUMN REACTOR FEED EFFECT 100
4 EVAPORATOR
EFFECT
EVAPORATOR CONDENSER HEATER REBOILERS
7680
CLEAN CONDENSATE
REV DATE PROCESS CTRL SYS PIP EICS PROJ 4
C-6535 E-6621 E-6521 E-6538A/B 139 350
C-6537 OSBL
Scientific Design Co., Inc.
21 900
Little Ferry, New Jersey
23 530
SECOND OSBL SD Project No. 53133
STAGE SUSPECT CONDENSATE
FEED 100
HEATER P-6920A/B
E-6522 E-6935

P-6925A/B TO EIGHTH EFFECT

REBOILER CONDENSATE
109 510 DRUM, V-6538
65-SD-1056
REV DATE REVISIONS APPR.
This drawing and all information thereon is the property of "United" and shall not be
reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
other than that for which it is specifically furnished without the priorwritten consent
of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 to "United.". 5
This space is reserved for the Arabic translation of the above paragraph.

JUBAIL UNITED
PETROCHEMICAL COMPANY
JUPC EG-III
PROCESS FLOW DIAGRAM
ETHYLENE GLYCOL PLANT
6 STEAM GRID 6
START-OF-RUN (DESIGN)
SCALE: None CHECKED: EG/RG
DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
FILENAME: 53133-69-SD-1101A
SHT.: REV.
DWG. 69-SD-1101 1 0
A B C D E F G H J K
 A B C D E F G H J K

7000
44.8 NOTES:
HP STEAM 400 259
8200 FOR START-UP ONLY 1. END-OF-RUN DESIGN CASE STEAM GRID FOR PLANT CAPACITY OF
OSBL
548 500 TONS EOE (700 000 TONS MEG) PER YEAR BASED ON 8000
OPERATING HOURS PER YEAR.
54 520
271
2. FLOWRATES ARE IN kg/h.
MP STEAM 58 020
1 OSBL 1
105 540
220
21.4

1200 58.5
79 640 7250 65 230 3190 5810 640 0 10 000
3500 21.4 21.4
REACTOR
FIRST MEG STEAM DRUMS
MEG COLUMN MEG DEG TEG EJECTORS ALDEHYDE
EFFECT SPLITTER COLUMN COLUMN V-6110
REBOILER COLUMN EJ-6612A, EJ-6622A, STRIPPER
0 REBOILER REBOILER REBOILER REBOILER V-6120
PREHEATER REBOILER EJ-6632A, EJ-6712A C-6560
E-6531 E-6624 E-6630 E-6710 E-6720
E-6620
4860 107 690
105 214
DESUPERHEATER WATER
OSBL 161 760
88 020
275

14.0
9620
2 27 870 25 520 2
34 630
13.3 REACTOR
160 11
GAS COOLER
89 820 E-6920A/B
DRYING FOURTH STAGE STEAM DRUMS
COLUMN REACTOR FEED 189 630 V-6112
REBOILER HEATER V-6122 165
E-6610 E-6524 188 PRESSURE (barg)
180 010
5
1690 192 160
LP STEAM TEMPERATURE - oC
123
OSBL 1.0
198 2150
250 152
2000
1800

1000 1.0
1850

3730
3 V-6920 197 510 3
120
0 120
0 7640 105
0 2000 32 260 2000 1200 BFW
4680 950 3950
4 OSBL
1.0
GLYCOL REGENERATOR
12 320
60 580 STRIPPING FEED EXTRACTION
COLUMN WASTE WATER
STRIPPER REBOILER STRIPPING
5000 C-6310 COLUMN REGENERATOR REGENERATOR VOC
C-6510 E-6223 REBOILER MISCELLANEOUS 211 540
1.1 1.0 REBOILER C-6220 STRIPPER
E-6310 E-6220 C-6570 REFERENCE DRAWING TITLE
14 830 13 380
SIXTH EFFECT 120
TO DEMINERALIZER
EVAPORATOR 4680 3000
107 300 19 130 59 960 OSBL
C-6536

43 850 CLEAN CONDENSATE

29-SD-1093
147 P-6930A/B E-6930 TO E-6960
FIFTH SEVENTH FIRST STAGE EIGHTH
EFFECT MEG COLUMN REACTOR FEED EFFECT 100
4 EVAPORATOR
EFFECT
EVAPORATOR CONDENSER HEATER REBOILERS
34 260
CLEAN CONDENSATE
REV DATE PROCESS CTRL SYS PIP EICS PROJ 4
C-6535 E-6621 E-6521 E-6538A/B 167 690
C-6537 OSBL
Scientific Design Co., Inc.
21 960
Little Ferry, New Jersey
23 520
SECOND OSBL SD Project No. 53133
STAGE SUSPECT CONDENSATE
FEED 100
HEATER P-6920A/B
E-6522 E-6935

P-6925A/B TO EIGHTH EFFECT

REBOILER CONDENSATE
106 050 DRUM, V-6538
65-SD-1056
REV DATE REVISIONS APPR.
This drawing and all information thereon is the property of "United" and shall not be
reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
other than that for which it is specifically furnished without the priorwritten consent
of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 to "United.". 5
This space is reserved for the Arabic translation of the above paragraph.

JUBAIL UNITED
PETROCHEMICAL COMPANY
JUPC EG-III
PROCESS FLOW DIAGRAM
ETHYLENE GLYCOL PLANT
6 STEAM GRID 6
END-OF-RUN (DESIGN)
SCALE: None CHECKED: EG/RG
DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
FILENAME: 53133-69-SD-1101B
SHT.: REV.
DWG. 69-SD-1101 2 0
A B C D E F G H J K
 A B C D E F G H J K

5000
44.8 NOTES:
HP STEAM 400 259
5900 FOR START-UP ONLY 1. START-OF-RUN "ZERO STEAM" CASE STEAM GRID FOR PLANT CAPACITY
OSBL
OF 584 550 TONS EOE (700 000 TONS MEG) PER YEAR BASED ON 8000
OPERATING HOURS PER YEAR.
5660
271
2. FLOWRATES ARE IN kg/h.
MP STEAM 5800
1 OSBL 1
126 200
220
21.4

900 29.6
44 470 6150 55 380 5370 9620 1210 0 10 000
360 21.4 21.4
REACTOR
FIRST MEG STEAM DRUMS
MEG COLUMN MEG DEG TEG EJECTORS ALDEHYDE
EFFECT SPLITTER COLUMN COLUMN V-6110
REBOILER COLUMN EJ-6612A, EJ-6622A, STRIPPER
5920 REBOILER REBOILER REBOILER REBOILER V-6120
PREHEATER REBOILER EJ-6632A, EJ-6712A C-6560
E-6531 E-6624 E-6630 E-6710 E-6720
E-6620
1590 128 780
105 214
DESUPERHEATER WATER
OSBL 122 200
34 280
235

15.6
8580
2 0 30 350 9850 2
13.3 REACTOR
330 10
0 GAS COOLER
34 980 E-6920A/B
DRYING FOURTH STAGE STEAM DRUMS
COLUMN REACTOR FEED 152 550 V-6112
REBOILER HEATER V-6122 165
E-6610 E-6524 184 PRESSURE (barg)
143 970
5
3630 192 142
LP STEAM TEMPERATURE - oC
116
OSBL 1.0
203 2580
250 152
410
700

1770 1.0
3960

1000
3 V-6920 163 760 3
120
0 120
0 3370 105
0 2000 2200 2000 1200 BFW
1700 700 3280
4 OSBL
1.0
GLYCOL REGENERATOR
5070
51 360 STRIPPING FEED EXTRACTION
COLUMN WASTE WATER
STRIPPER REBOILER STRIPPING
30 000 C-6310 COLUMN REGENERATOR REGENERATOR VOC
C-6510 E-6223 REBOILER MISCELLANEOUS 148 940
1.1 1.0 REBOILER C-6220 STRIPPER
E-6310 E-6220 C-6570 REFERENCE DRAWING TITLE
21 320 6610
SIXTH EFFECT 120
TO DEMINERALIZER
EVAPORATOR 1700 2580
61 730 28 790 5010 OSBL
C-6536

43 850 CLEAN CONDENSATE

29-SD-1093
FIRST STAGE EIGHTH 147 P-6930A/B E-6930 TO E-6960
FIFTH SEVENTH
EFFECT MEG COLUMN REACTOR FEED EFFECT 4200 100
4 EVAPORATOR
EFFECT
EVAPORATOR CONDENSER HEATER REBOILERS CLEAN CONDENSATE
REV DATE PROCESS CTRL SYS PIP EICS PROJ 4
C-6535 E-6621 E-6521 E-6538A/B 105 090
C-6537 OSBL
Scientific Design Co., Inc.
0
Little Ferry, New Jersey
9440
SECOND OSBL SD Project No. 53133
STAGE SUSPECT CONDENSATE
FEED 100
HEATER P-6920A/B
E-6522 E-6935

P-6925A/B TO EIGHTH EFFECT

REBOILER CONDENSATE
63 800 DRUM, V-6538
65-SD-1056
REV DATE REVISIONS APPR.
This drawing and all information thereon is the property of "United" and shall not be
reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
other than that for which it is specifically furnished without the priorwritten consent
of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 to "United.". 5
This space is reserved for the Arabic translation of the above paragraph.

JUBAIL UNITED
PETROCHEMICAL COMPANY
JUPC EG-III
PROCESS FLOW DIAGRAM
ETHYLENE GLYCOL PLANT
6 STEAM GRID 6
START-OF-RUN ("ZERO STEAM")
SCALE: None CHECKED: EG/RG
DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
FILENAME: 53133-69-SD-1101C
SHT.: REV.
DWG. 69-SD-1101 3 0
A B C D E F G H J K
 A B C D E F G H J K

5000
44.8 NOTES:
HP STEAM 400 259
5900 FOR START-UP ONLY 1. END-OF-RUN "ZERO STEAM" CASE STEAM GRID FOR PLANT CAPACITY
OSBL
OF 584 550 TONS EOE (700 000 TONS MEG) PER YEAR BASED ON 8000
OPERATING HOURS PER YEAR.
2570
271
2. FLOWRATES ARE IN kg/h.
MP STEAM 2730
1 OSBL 1
121 820
220
21.4

900 58.5
42 720 6150 55 380 5370 9620 1210 0 10 000
160 21.4 21.4
REACTOR
FIRST MEG STEAM DRUMS
MEG COLUMN MEG DEG TEG EJECTORS ALDEHYDE
EFFECT SPLITTER COLUMN COLUMN V-6110
REBOILER COLUMN EJ-6612A, EJ-6622A, STRIPPER
0 REBOILER REBOILER REBOILER REBOILER V-6120
PREHEATER REBOILER EJ-6632A, EJ-6712A C-6560
E-6531 E-6624 E-6630 E-6710 E-6720
E-6620
1520 124 310
105 214
DESUPERHEATER WATER
OSBL 120 450
86 400
275

14.0
7250
2 30 350 9830 2
46 220 13.3 REACTOR
11 0
460 GAS COOLER
88 160 E-6920A/B
DRYING FOURTH STAGE STEAM DRUMS
COLUMN REACTOR FEED V-6112
152 550
REBOILER HEATER V-6122 155
E-6610 E-6524 188 PRESSURE (barg)
143 550
5
5030 192 142
LP STEAM TEMPERATURE - oC
114
OSBL 1.0
200 2490
250 152
410
1760

1000 1.0
5490

1760
3 V-6920 212 470 3
120
0 120
0 9140 105
0 8000 37 620 2000 1200 BFW
2810 1050 4250
4 OSBL
1.0
0 GLYCOL REGENERATOR
11 950
51 420 STRIPPING FEED EXTRACTION
COLUMN WASTE WATER
STRIPPER REBOILER STRIPPING
C-6310 COLUMN REGENERATOR REGENERATOR VOC
C-6510 E-6223 REBOILER MISCELLANEOUS 188 410
1.1 1.0 REBOILER C-6220 STRIPPER
E-6310 E-6220 C-6570 REFERENCE DRAWING TITLE
20 400 6330
SIXTH EFFECT 120
TO DEMINERALIZER
EVAPORATOR 2810 3200
88 040 27 880 33 430 OSBL
C-6536

43 850 CLEAN CONDENSATE

29-SD-1093
FIRST STAGE EIGHTH 147 P-6930A/B E-6930 TO E-6960
FIFTH SEVENTH
EFFECT MEG COLUMN REACTOR FEED EFFECT 45 620 100
4 EVAPORATOR
EFFECT
EVAPORATOR CONDENSER HEATER REBOILERS CLEAN CONDENSATE
REV DATE PROCESS CTRL SYS PIP EICS PROJ 4
C-6535 E-6621 E-6521 E-6538A/B 144 560
C-6557 OSBL

0
Scientific Design Co., Inc.
Little Ferry, New Jersey
9420
SECOND OSBL SD Project No. 53133
STAGE SUSPECT CONDENSATE
FEED 100
HEATER P-6920A/B
E-6522 E-6935

P-6925A/B TO EIGHTH EFFECT

REBOILER CONDENSATE
DRUM, V-6538
61 310
65-SD-1056
REV DATE REVISIONS APPR.
This drawing and all information thereon is the property of "United" and shall not be
reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
other than that for which it is specifically furnished without the priorwritten consent
of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 to "United.". 5
This space is reserved for the Arabic translation of the above paragraph.

JUBAIL UNITED
PETROCHEMICAL COMPANY
JUPC EG-III
PROCESS FLOW DIAGRAM
ETHYLENE GLYCOL PLANT
6 STEAM GRID 6
END-OF-RUN ("ZERO STEAM")
SCALE: None CHECKED: EG/RG
DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
FILENAME: 53133-69-SD-1101D
SHT.: REV.
DWG. 69-SD-1101 4 0
A B C D E F G H J K
 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page 2.3 - 2

B. COOLING WATER FLOW DIAGRAM

Flowsheet No. Flowsheet Title

69-SD-1102 Cooling Water Flow Diagram

Confidential Information of Scientific Design Company, Inc.

 A B C D E F G H J K

GENERAL:
1. SD DRWINGS 00-SD-0001 AND 00-SD-0002 FOR STANDARD SYMBOLS
AND NOMENCLATURE.

2. FLOW RATES ARE IN m³/h.

1 3. TEMPERATURES ARE BASED ON DESIGN CONDITIONS. 1

5.5
39
COOLING WATER SUPPLY
OSBL
21,698.3

14,005

485.1
747.9
219.7

489.6

5657
94
51

4854.1

1585.3
1330.8

1585.3
1943
1759

307.5
69.6

5657
56.3
464

6.1

44

94
219.7

2 2

E-6313A-F
E-6553

E-6560
E-6116

E-6539

E-6622

E-6322

E-6321
E-6611

E-6712

E-6930

E-6935
E-6540
E-6722

E-6715
PRESSURE (barg)

P-6910A/B TEMPERATURE - oC

51 51 51 51 44 51 51 49 51 51 51 51 51 51

3 3

317.2
422.5

49.4

138.3
201.8

58.8
276

61.5
24.7
2.4
90
10
70

EJ-6612A

EJ-6712A
EJ-6632A
EJ-6622A
E-6615

K-6950
E-6631

E-6711

E-6721

K-6115

K-6315

E-6323
K-6320

E-6623
REFERENCE DRAWING TITLE

51 51 51 51 49 49 49 44 49 51 51 51 51 51

4 REV DATE PROCESS CTRL SYS PIP EICS PROJ 4

Scientific Design Co., Inc.

Little Ferry, New Jersey
13,541

489.6

485.1
747.9
219.7

5657
SD Project No. 53133

94
464

3.0
50.3
COOLING WATER RETURN
OSBL
21,698.3
1 09/07/16 REVISED PER EPDP MEETING
REV DATE REVISIONS APPR.
This drawing and all information thereon is the property of "United" and shall not be
reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
other than that for which it is specifically furnished without the priorwritten consent
of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 to "United.". 5
This space is reserved for the Arabic translation of the above paragraph.

JUBAIL UNITED
PETROCHEMICAL COMPANY
JUPC EG-III
PROCESS FLOW DIAGRAM
ETHYLENE GLYCOL PLANT
6 COOLING WATER FLOW DIAGRAM 6

SCALE: None CHECKED: EG/RG

DATE: 03/30/16 APPROVED: SK
DRAWN: CAD APPROVED:
FILENAME: 53133-69-SD-1102
SHT.: REV.
DWG. 69-SD-1102 1
A B C D E F G H J K
 SCIENTIFIC DESIGN COMPANY, INC.
SABIC – Clariant Partnership Company

SD Project No. 53133

Page 2.4 - 1

2.4

MATERIAL OF CONSTRUCTION DIAGRAM

A. MATERIAL OF CONSTRUCTION DIAGRAM

Flowsheet No. Flowsheet Title

61-M-1011 EO Reaction System

61-M-1012 EO and CO2 Scrubbing

62-M-1021 CO2 Removal System

63-M-1031 EO Stripping
63-M-1032 EO Reabsorption

65-M-1051 Recycle Water System and Cycle Water Treating Unit

65-M-1052 Glycol Reaction
65-M-1053 1st - 3rd Effect Evaporators
65-M-1054 4th and 5th Effect Evaporators
65-M-1055 6th and 7th Effect Evaporators
65-M-1056 Eighth Effect Evaporator

66-M-1061 Glycol Drying

66-M-1062 Glycol Purification
66-M-1063 MEG Product Rundown
66-M-1064 MEG Column Ejector
66-M-1065 MEG Splitter

67-M-1071 DEG Purification

67-M-1072 TEG Purification

69-M-1091 Condensate System

69-M-1092 HP Nitrogen System and Miscellaneous Utilities
69-M-1093 Process Water System and Waste Water System
69-M-1094 Carbonate Sump and Glycol Sump Collection Systems

Confidential Information of Scientific Design Company, Inc.

 A B C D E F G H J K

P-6110 F-6110A/B F-6150A/B MX-6110 V-6140 MOC NOTES:

V-6112
REACTOR OXYGEN ETHYLENE OXYGERN MIXING MODERATOR FEED 1. CS=CARBON STEEL
REACTOR GAS
START-UP PUMP FILTERS FILTER STATION SPARGER DRUM SS=304 ST. STEEL, UNLESS OTHERWISE
COOLER STEAM DRUM STATED.
CASE: CS HOUSING: SS HOUSING: CS+3 mm SS WITH INCONEL
IMPELLER: CS FILTER: FIBERGLASS CS + 3 mm 601 FINGERS SHELL: SS 2. FOR HEAT EXCHANGERS (SHELL & TUBE):
1 FILTER: FIBERGLASS K-6115 INTERNALS: SS 1
V-6110 R-6110 E-6111 S=SHELLSIDE MOC
R-6150 RECYCLE
REACTOR/GAS T=TUBE MOC
REACTOR SULFUR GUARD GAS-GAS
COMPRESSOR TS=TUBE SHEET MOC
STEAM DRUM BED COOLER EXCHANGER 3. CORROSION ALLOWANCES FOR PIPING:
S: SA-302 GR. C S: SS CASE: CS +3 mm
SHELL: CS+3 mm CS +3 mm IMPELLER: LOW ALLOY CS CS=1.25 mm
PACKING: CS T: DUPLEX 2205 T: SS ST. STEEL PIPING=0 mm
TS: SA508 GR. 3 CL. 1+ TS: SS
40
309L/308L SS OVERLAY
ETHYLENE
AMB CS
OSBL 101

FC
R-6150
CS SS

2 2
F-6150A/B

PRESSURE (barg)
21 MIN FC
METHANE
AMB CS
OSBL 103 TEMPERATURE - oC

NNF

FC SS HP NITROGEN
OXYGEN
27 MIN
AMB SS SS
69-M-1092
OSBL 102 FROM V-6950

CS
F-6110A/B
MP STEAM FROM V-6120
3 SS 3
MODERATOR
PC V-6140
FT 21 CS
SM SS
FFC

CS 190 SOR THIS DRAWING IS TO BE USED FOR

CS
FT
CS 200 EOR
METALLURGICAL SELECTION ONLY.
START-UP ONLY IP STEAM FROM V-6122 245 MAX
SH 198 EOR SS HP NITROGEN FOR PURGING
FOR ALL OTHER DATA REFER TO THE
29.6 58.5 20.71 CS 203 SOR 69-M-1092 PFD.
CS SOR EOR SI
PC
MX-6110 FROM V-6950

WB E-6111 104
LC 13.3 MAX SOR EOR
165 SOR TC SS SS
155 EOR V-6110
LC 35.5 15.6 14.0 TO E-6121 IN PARALLEL SS
165 SOR REACTION SYSTEM 106
4 CS 4
CS R-6110 CS 156 EOR
SOR 215
WB V-6112 EOR 227
SS
235 SOR Scientific Design Co., Inc.
CS
BLOWDOWN CS 275 EOR
105
SS Little Ferry, New Jersey
RICH CYCLE GAS SD Project No. 53133
69-M-1091
107 109 61-M-1012
TO V-6930
STARTUP BLOWDOWN CS CS CS TO E-6115
NNF 19.51 NNF PC
69-M-1091
59 STARTUP LEAN CYCLE GAS
TO V-6920
START-UP ONLY
SS 112 61-M-1012
SH FROM E-6121 IN PARALLEL FROM C-6115
REACTION SYSTEM 108 22.07 2 04/05/16 PER CLIENT COMMENTS
CS 18.04 NOR SS 1 03/28/16 PER CLIENT COMMENTS
SS REV DATE REVISIONS APPR.
P-6110
17.74 DES This drawing and all information thereon is the property of "United" and shall not be
CS CS reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
BLOWDOWN other than that for which it is specifically furnished without the priorwritten consent
K-6115
69-M-1091 of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 TO V-6930 to "United.". 5
This space is reserved for the Arabic translation of the above paragraph.

JUBAIL UNITED
PETROCHEMICAL COMPANY
JUPC EG-III
MATERIAL OF CONSTRUCTION DIAGRAM
ETHYLENE GLYCOL PLANT
6 EO REACTION SYSTEM 6

SCALE: None CHECKED: EG

DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
FILENAME: 53133-61-M-1011
SHT.: REV.
DWG. 61-M-1011 2
A B C D E F G H J K
 A B C D E F G H J K

E-6116 E-6115 E-6117A/B MOC NOTES:

WASH WATER WASH TOWER CARBONARE FEED/ 1. CS=CARBON STEEL
COOLER FEED /BOTTOMS EXCHANGER EFFLUENT EXCHANGER SS=304 ST. STEEL, UNLESS OTHERWISE
STATED.
PLATES: 316 SS S: SS S: SS 2. FOR HEAT EXCHANGERS (SHELL & TUBE):
1 GASKETS: EPDM T: 304L SS T: 304L SS 1
P-6116A/B TS: 304L SS C-6115 TS: 304L SS F-6117 S=SHELLSIDE MOC
WASH WATER WASH TOWER T=TUBE MOC
CARBONATE SOLUTION TS=TUBE SHEET MOC
PUMPS SHELL: 304L SS CLADDED FILTER
INTERNALS: SS 3. CORROSION ALLOWANCES FOR PIPING:
CASE: SS HOUSING: SS CS=1.25 mm
IMPELLER: SS FILTER: NYLON ST. STEEL PIPING=0 mm

2 18.15 2
45 SS 106 SS RICH CARBONATE SOL'N
111 114 62-M-1021
FC TO C-6220
CS 51
E-6116
43 SS PRESSURE (barg)
WR 118
LC
TEMPERATURE - oC
FC FI FC
CONDENSATE SS 121
SS 80 113
SS SS LEAN CARBONATE SOL'N
NNF
62-M-1021 62-M-1021
FROM P-6221A/B
WASH WATER SS 67 SS CS 39 FROM P-6220A/B
115 E-6117A/B
62-M-1021 WC
120
FROM E-6222 SS
LC F-6117
SS SS 73

3 FC LC 3
WASH WATER SS 47 SS 47

62-M-1021 116 SS RECLAIM GAS

TO E-6222 316 63-M-1032
119 FROM K-6320

RICH CYCLE WATER 57 SS FC

SS 33 THIS DRAWING IS TO BE USED FOR
LEAN CYCLE WATER
63-M-1031 110
306 63-M-1031
METALLURGICAL SELECTION ONLY.
TO E-6312 18.38
RICH CYCLE GAS SS 86 E-6115 70 SS 2 FROM P-6312A/B FOR ALL OTHER DATA REFER TO THE
61-M-1011 109
1
PFD.
FROM E-6111/E-6121 52 LC SS CARRY OVER
LEAN RECYCLE GAS SS 45 SS 62-M-1021
61-M-1011 112 TO C-6220
TO K-6115
FC SS 4
4 CYCLE GAS PURGE SS
C-6115 LC CARRY OVER
OSBL 113 SS 63-M-1031
TO INCINERATOR Scientific Design Co., Inc.
WASH WATER 47 SS TO C-6310
Little Ferry, New Jersey
62-M-1021 117 SS CARRY OVER
TO C-6220 FLASH DRUM SD Project No. 53133
69-M-1093
NNF TO WASTE WATER SUMP

P-6116A/B
3 09/07/16 REVISED PER EPDP MEETING
2 04/05/16 PER CLIENT COMMENTS
1 03/28/16 PER CLIENT COMMENTS
REV DATE REVISIONS APPR.
This drawing and all information thereon is the property of "United" and shall not be
reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
other than that for which it is specifically furnished without the priorwritten consent
of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 to "United.". 5
This space is reserved for the Arabic translation of the above paragraph.

JUBAIL UNITED
PETROCHEMICAL COMPANY
JUPC EG-III
MATERIAL OF CONSTRUCTION DIAGRAM
ETHYLENE GLYCOL PLANT
6 EO AND CO2 SCRUBBING 6

SCALE: None CHECKED: EG

DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
FILENAME: 53133-61-M-1012
SHT.: REV.
DWG. 61-M-1012 3
A B C D E F G H J K
 A B C D E F G H J K

P-6220A/B V-6223 C-6220 E-6222 P-6230 E-6221 P-6221A/B MOC NOTES:

CARBONATE REGENERATOR EXTRACTION REGENERATOR /REGENERATOR REGENERATOR CARBONATE REGENERATOR REGENERATOR 1. CS=CARBON STEEL
SOLUTION PUMPS REBOILER CONDENSATE DRUM FEED FLASH DRUMS PRECONDENSER TRANSFER PUMPS CONDENSER CONDENSATE PUMPS SS=304 ST. STEEL, UNLESS OTHERWISE
STATED.
CASE: SS SS SHELL: SS S: SS CASE: SS HEADER: SS CASE: SS
IMPELLER: 13CR-4NI INTERNALS:SS T: SS IMPELLER: SS TUBES: SS 2. FOR HEAT EXCHANGERS (SHELL & TUBE):
1 IMPELLER: SS 1
TS: SS S=SHELLSIDE MOC
P-6223A/B E-6223 E-6220 V-6222 P-6222A/B TK-6230 V-6221 T=TUBE MOC
REGENERATOR EXTRACTION REGENERATOR EXTRACTION REGENERATOR REGENERATOR REGENERATOR CARBONATE REGENERATOR TS=TUBE SHEET MOC
REBOILER PRECONDENSER 3. CORROSION ALLOWANCES FOR PIPING:
REBOILER CONDENSATE PUMPS REBOILER PRECONDENSER KO DRUM STORAGE TANK CONDENSER KO DRUM
CONDENSATE PUMPS CS=1.25 mm
CASE: SS S: SS S: CS + 1.5 mm SS SS SS ST. STEEL PIPING=0 mm
IMPELLER: SS T: 304L SS T: 304L SS CASE: SS
TS: 304L SS TS: 304L SS IMPELLER: SS

SS
NNF
ATM
47
SS 105 SS CARBONATE FLASH GAS
WASH WATER
206 63-M-1032
61-M-1012 117
TO E-6323
FROM P-6116A/B
2 2
SS WASH WATER
CARRY OVER
NNF
61-M-1012 PC 61-M-1012
FROM C-6115 SS ATM
TO E-6116
0.95 PC
106
RICH CARBONATE SOL'N SS SS PRESSURE (barg)

61-M-1012 114
SS
FROM E-6117A/B 0.77 67 OSBL TEMPERATURE - oC
60
SS LC
204 SS
E-6221 SS PC

0.41
SS 207
105 SS SS 60
LC 203 V-6222 0.2
106

SS 201
E-6222
LC
3 NNF 3
WI
47
SS
WASH WATER SS V-6221
61-M-1012 CS LC
FROM P-6116A/B
SL
85 SS TO STRIPPING COLUMN
FLOW CONTROL
69-M-X-1091 205 63-M-1031
SELECTOR SWITCH
TO C-6310 THIS DRAWING IS TO BE USED FOR
69-M-X-1091
ANTIFOAM FROM
FC P-6222A/B
CS METALLURGICAL SELECTION ONLY.
FLASH STEAM
DOSING BOTTLE FOR ALL OTHER DATA REFER TO THE
69-M-1091
FROM V-6920/6930 PFD.
FC FC SS 208
EXTRACTION STEAM 146 SS SS SS
SL
65-M-1055 573 SS SS TC NNF 69-M-1093
FROM C-6536 TK-6230
CONDENSATE SS CS SS SS
4 NNF
SL 4
65-M-1056 C-6220
E-6220
TO V-6538
SS E-6223 CS
LEAN CARBONATE SOL'N SS 113 Scientific Design Co., Inc.
SCL
61-M-1012 202 SS SS CS Little Ferry, New Jersey
TO E-6117A/B LC V-6223
CS SCL SD Project No. 53133
SS SS
SEAL FLUSH

REGEN CONDENSATE SS P-6220A/B P-6223A/B SS SS SS SS

P-6230 P-6221A/B CARBONATE SOLUTION 3 09/07/16 REVISED PER EPDP MEETING
61-M-1012
69-SD-1094 2 04/05/16 PER CLIENT COMMENTS
TO C-6115/P-6116A/B
SS FROM P-6972A/B 1 03/28/16 PER CLIENT COMMENTS
REV DATE REVISIONS APPR.
This drawing and all information thereon is the property of "United" and shall not be
reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
other than that for which it is specifically furnished without the priorwritten consent
of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 to "United.". 5
This space is reserved for the Arabic translation of the above paragraph.

JUBAIL UNITED
PETROCHEMICAL COMPANY
JUPC EG-III
MATERIAL OF CONSTRUCTION DIAGRAM
ETHYLENE GLYCOL PLANT
6 CO2 REMOVAL SYSTEM 6

SCALE: None CHECKED: EG

DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
FILENAME: 53133-62-M-1021
SHT.: REV.
DWG. 62-M-1021 3
A B C D E F G H J K
 A B C D E F G H J K

PK-6335 E-6313A-F E-6314 P-6310A/B C-6310 E-6310 V-6311 MOC NOTES:

CAUSTIC INJECTION CYCLE WATER CYCLE WATER STRIPPING COLUMN STRIPPING COLUMN STRIPPING COLUMN ACID 1. CS=CARBON STEEL
SYSTEM COOLER CHILLER EXCHANGER BOTTOMS PUMPS FLASH DRUM REBOILER SCRUBBER SS=304 ST. STEEL, UNLESS OTHERWISE
TANK: CS PLATES: 316 SS SHELL & INTERNALS: S: CS + 1.5 mm SS STATED.
PLATES: 316 SS CASE: SS
PUMP: 316 SS GASKETS: EPDM GASKETS: EPDM IMPELLER: SS 304L SS CLADDED T: 304L SS 2. FOR HEAT EXCHANGERS (SHELL & TUBE):
1 1
INTERNALS: SS TS: 304L SS S=SHELLSIDE MOC
PK-6336 E-6312 P-6312A/B V-6315 K-6315 E-6311 P-6311A/B T=TUBE MOC
CYCLE WATER CYCLE WATER CYCLE WATER CYCLE WATER FLASH DRUM CYCLE WATER STRIPPING COLUMN STRIPPING COLUMN TS=TUBE SHEET MOC
ANTIFOAM INJECTION SYSTEM PUMPS COMPRESSOR KO DRUM CONDENSER REFLUX PUMPS 3. CORROSION ALLOWANCES FOR PIPING:
EXCHANGER FLASH DRUM COMPRESSOR CS=1.25 mm
SS PLATES: 316 SS CASE: SS 304L SS CLADDED CASE: CS + SS OVERLAY HEADER: 304L SS CASE: SS ST. STEEL PIPING=0 mm
GASKETS: PTFE IMPELLER: SS ROTOR: SS TUBES: 304L SS IMPELLER: SS
4. PK-6314 - MATERIAL IN CONTACT WITH
PROCESS SHOULD BE S.S.
60
FC REABSORBER FEED
RECYCLE WATER
SS 308 63-M-1032
NNF E-6311
65-M-1051 TO C-6320
FROM P-6540A/B
SS
PRECONDENSATE SS SS
2 62-M-1021 205 2
FROM P-6222A/B
CYCLE WATER
SS
66-M-1062 304 0.49
TO E-6621 301 SS FC

CYCLE WATER BLEED SS 60 WP PRESSURE (barg)

94
65-M-1051 305
TO E-6552 SS V-6311
303
TEMPERATURE - oC
0.59
SS LC
97
RICH CYCLE WATER
57 SS 307
61-M-1012 110
FROM C-6115 E-6312
SS SS
SS TC

SL
3 39 3
64 WC
SS FT

(NOTE 4) FC SS EXTRACTION STEAM

CS RELOCATED
65-M-1055
OSBL 546
FROM C-6537
PACKAGE
51 UNIT FT
SS PROCESS STEAM
CS 43
0.66 66-M-1062
THIS DRAWING IS TO BE USED FOR
PK-6314
WR FROM E-6621 METALLURGICAL SELECTION ONLY.
SS CARRYOVER FOR ALL OTHER DATA REFER TO THE
E-6313A-F SS E-6314
33 SS 61-M-1012 PFD.
LC FROM C-6115 KO DRUM
157 C-6310 FC
SS
33 SS SS SL
LEAN CYCLE WATER
61-M-1012 306 E-6310

4
TO C-6115 SS CS 4
CS SS
SS SCL
Scientific Design Co., Inc.
Little Ferry, New Jersey
0.18
0.69
SS CS SD Project No. 53133

ANTIFOAM SS
115
PC
CS K-6315 LC
KC PC
2 09/07/16 REVISED PER EPDP MEETING
SS 105 SC 1 03/28/16 PER CLIENT COMMENTS
REV DATE REVISIONS APPR.
302 60
This drawing and all information thereon is the property of "United" and shall not be
SS SS reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
P-6312A/B P-6310A/B other than that for which it is specifically furnished without the priorwritten consent
PK-6335 PK-6336 of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 V-6315 to "United.". 5
P-6311A/B
This space is reserved for the Arabic translation of the above paragraph.
SS BLOWDOWN
NNF
66-M-1062
CARRY OVER SS FROM P-6625A/B
69-SD-1094
TO GLYCOL PUMP
JUBAIL UNITED
PETROCHEMICAL COMPANY
JUPC EG-III
MATERIAL OF CONSTRUCTION DIAGRAM
ETHYLENE GLYCOL PLANT
6 EO STRIPPING 6

SCALE: None CHECKED: EG

DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
FILENAME: 53133-63-M-1031
SHT.: REV.
DWG. 63-M-1031 2
A B C D E F G H J K
 A B C D E F G H J K

V-6320 E-6323 P-6320A/B E-6321 MOC NOTES:

RECLAIM COMPRESSOR RECLAIM COMPRESSOR REABSORBER REABSORBER 1. CS=CARBON STEEL
KO DRUM AFTERCOOLER BOTTOMS PUMPS WATER COOLER SS=304 ST. STEEL, UNLESS OTHERWISE
SS S: SS CASE: SS PLATES: 316 SS STATED.
T: 304L SS IMPELLER: SS GASKETS: EPDM 2. FOR HEAT EXCHANGERS (SHELL & TUBE):
1 TS: 304L SS 1
S=SHELLSIDE MOC
T=TUBE MOC
K-6320 C-6320 E-6322 E-6324 TS=TUBE SHEET MOC
RECLAIM REABSORBER REABSORBER 3. CORROSION ALLOWANCES FOR PIPING:
REABSORBER CS=1.25 mm
COMPRESSOR BOTTOMS COOLER BOTTOM HEATER
CYLINDER: CAST IRON SHELL & INTERNALS: SS ST. STEEL PIPING=0 mm
PACKING: SS PLATES: 316 SS PLATES: 316 SS
PISTON: CAST IRON GASKETS: PTFE GASKETS: PTFE
INTERCOOLER/SEPARATOR: SS

2 105 SS 2
CARBONATE FLASH GAS
206 62-M-1021
FROM C-6220
20.19
127 MAX. SS RECLAIM GAS
316 61-M-1012 PRESSURE (barg)
60
ACID SCRUBBER OVHDS SS NNF
ATM.
TO C-6115

63-M-1031 308 TEMPERATURE - oC

56 25/1
FROM V-2311 SS SS
50 17/1 SS GFS OVERHEADS
501 65-M-1052
43 FROM C-6510
310
PC FC
CS SS SS 43 WR
0.39 309
WR
3 MAX 3
E-6321 51
E-6323 CS
39 44 43 25/1
CS 39
SS 46 17/1
RECYCLE WATER
SS WC 544 65-M-1051
WC FROM P-6540A/B THIS DRAWING IS TO BE USED FOR
45
CS CS 44 METALLURGICAL SELECTION ONLY.
FOR ALL OTHER DATA REFER TO THE
WR
PFD.
SS
314 43
SS E-6322

0.02
SS SS
V-6320
4 45 SS 4
SS 39
SS
C-6320
TC WC 73 25/1 Scientific Design Co., Inc.
LC
Little Ferry, New Jersey
PC
63 17/1 SS
20.19 LC CS EVAP. CONDENSATE SD Project No. 53133
MAX 574 65-M-1052
45 127 0.44 FROM E-6520
45
WASTE WATER SS
E-6324
69-M-1093 315 FC 53 25/1
TO WASTE WATER SUMP 2 09/07/16 REVISED PER EPDP MEETING
SS 312 48 48 17/1 SS REABSORBER BTMS 1 03/28/16 PER CLIENT COMMENTS
SS 48
65-M-1052
313 REV DATE REVISIONS APPR.
K-6320 311 TO C-6510 This drawing and all information thereon is the property of "United" and shall not be
25/1 67
reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
EVAP. CONDENSATE
17/1 63 SS TC other than that for which it is specifically furnished without the priorwritten consent
P-6320A/B of "United". The drawing and any copies thereof (partial or complete) shall be returned
65-M-1051 543 to "United.".
5 5
TO E-6540
This space is reserved for the Arabic translation of the above paragraph.

JUBAIL UNITED
PETROCHEMICAL COMPANY
JUPC EG-III
MATERIAL OF CONSTRUCTION DIAGRAM
ETHYLENE GLYCOL PLANT
6 EO REABSORPTION 6

SCALE: None CHECKED: EG

DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
FILENAME: 53133-63-M-1032
SHT.: REV.
DWG. 63-M-1032 2
A B C D E F G H J K
 A B C D E F G H J K

E-6552 PK-6550 P-6550A/B TK-6540 MOC NOTES:

CYCLE WATER CYCLE WATER TREATED WATER RECYCLE WATER 1. CS=CARBON STEEL
BLEED EXCHANGER PUMPS SS=304 ST. STEEL, UNLESS OTHERWISE
TREATING UNIT TANK STATED.
PLATES: 316 SS BY VENDOR CASE: SS SS OR CS 2. FOR HEAT EXCHANGERS (SHELL & TUBE):
1 GASKETS: EPDM IMPELLER: SS COATED WITH FLAME 1
E-6553A/B TK-6550 P-6540A/B E-6540A/B S=SHELLSIDE MOC
SPRAYED ALUMINUM
T=TUBE MOC
CYCLE WATER TREATED WATER RECYCLE WATER RECYCLE WATER TS=TUBE SHEET MOC
BLEED COOLER TANK PUMPS COOLER 3. CORROSION ALLOWANCES FOR PIPING:
PLATES: 316 SS SS CASE: SS PLATES: 316 SS CS=1.25 mm
GASKETS: EPDM IMPELLER: SS GASKETS: EPDM ST. STEEL PIPING=0 mm
4.ACID PROOF PIPING OR TRENCH.

WC

46
SS SS 70 25/1 93 25/1
RECYCLE WATER CS E-6553A/B E-6552 SS
2 63-M-1032 544 39 46 17/1 93 17/1
TREATED WATER 2
TO E-6321 65-M-1053
530
RECYCLE WATER TO C-6531/6532/6533
63-M-1031
NNF 39 SS 105
CYCLE WATER BLEED
TO C-6310 305 63-M-1031
SS SS
FROM P-6310A/B PRESSURE (barg)
SS
44 121
BLOWDOWN TEMPERATURE - oC
WR 619 66-M-1062
62 25/1
FROM P-6625A/B
38 17/1 CS SS
PK-6550
20% NaOH LEVEL CONTROL
CAUSTIC TO ANION
KC
SS DILUTION BED 65-M-1056
MEG RECYCLE FROM V-6538 LC VALVE
NNF 30% HCl ACID TO CATION
SS EVAP. CONDENSATE
66-M-1064 HCL
DILUTION BED
3 FROM P-6623A/B 536 65-M-1052 3
NaHSO3 CHEMICAL TO FRR FROM E-6520
KP FC
MAKE-UP BED 60 SS
WC
WP
NL
CS 25/1 67
SS
PC CS 39 17/1 63 SS
E-6540A/B EVAP. CONDENSATE THIS DRAWING IS TO BE USED FOR
CATION

NL

ANION

ANION
METALLURGICAL SELECTION ONLY.

ARR
543 63-M-1032

43 SS 51
FROM E-6324 FOR ALL OTHER DATA REFER TO THE
SS PC CS PFD.
WR
WP
SS LC CS
SS

SS
60 560 HOTWELL CONDENSATE
WASTE WATER LC
551 65-M-1056
69-M-1093 538
(NOTE 4) SS SS TK-6540 P-6538A/B
4 TO NEUTRALIZATION SUMP 512
TK-6550 4
554
(DISPL. Scientific Design Co., Inc.
WATER) P-6550A/B P-6540A/B
SS Little Ferry, New Jersey
SD Project No. 53133

2 04/05/16 PER CLIENT COMMENTS

1 03/28/16 PER CLIENT COMMENTS
REV DATE REVISIONS APPR.
This drawing and all information thereon is the property of "United" and shall not be
reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
other than that for which it is specifically furnished without the priorwritten consent
of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 to "United.". 5
This space is reserved for the Arabic translation of the above paragraph.

JUBAIL UNITED
PETROCHEMICAL COMPANY
JUPC EG-III
MATERIAL OF CONSTRUCTION DIAGRAM
ETHYLENE GLYCOL PLANT
6 RECYCLE WATER SYSTEM 6
AND CYCLE WATER TREATING UNIT
SCALE: None CHECKED: EG
DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
FILENAME: 53133-65-M-1051
SHT.: REV.
DWG. 65-M-1051 2
A B C D E F G H J K
 A B C D E F G H J K

C-6510 C-6570 E-6521 E-6523 R-6520 MOC NOTES:

GLYCOL FEED WASTE WATER FIRST STAGE THIRD STAGE GLYCOL REACTOR 1. CS=CARBON STEEL
STRIPPER VOC STRIPPER REACTOR FEED REACTOR FEED SS=304 ST. STEEL, UNLESS OTHERWISE
SS
HEATER HEATER STATED.
SHELL & INTERNALS: SS SHELL &
PACKING: SS 2. FOR HEAT EXCHANGERS (SHELL & TUBE):
1 P-6510A/B PACKING: 304L SS E-6520 PLATES: 316 SS E-6522 S: SS E-6524 E-6560 1
INTERNALS: SS GASKETS: PTFE S=SHELLSIDE MOC
SECOND STAGE T: 304L SS ALDEHYDE STRIPPER
REACTOR FEED REACTOR FEED TS: 304L SS FOURTH STAGE T=TUBE MOC
PUMPS PREHEATER REACTOR FEED REACTOR FEED WASTE WATER TS=TUBE SHEET MOC
CASE: SS PLATES: 316 SS HEATER HEATER COOLER 3. CORROSION ALLOWANCES FOR PIPING:
IMPELLER: SS GASKETS: PTFE PLATES: 316 SS S: CS +1.5 mm PLATES: 316 SS CS=1.25 mm
GASKETS: PTFE T: 304L SS GASKETS: EPDM ST. STEEL PIPING=0 mm
TS: 304L SS

SS
133 ALDEHYDE VENT
553 OSBL
TO INCINERATOR
CS FC
2 2
SI

56 25/1
SS FC
50 17/1 E-6524 CS 161
GFS OVERHEADS SUSPECT CONDENSATE
63-M-1032 501
PC 2.0
SS SS 69-M-1091 PRESSURE (barg)
TO C-6320 TO V-6920
SS 195
GLYCOL REACTOR OUTLET
150 25/1 TEMPERATURE - oC
53 25/1 505 65-M-1053
SS 48 17/1 0.46 132 17/1
TO C-6531
REABSORBER BTMS FC TC
63-M-1032 313
FROM E-6324 SL
LC SS R-6520
EVAPORATOR CONDENSATE
SS C-6570
189 25/1 134 25/1
190 25/1
63-M-1032 574 FC 172 17/1 123 17/1
504 SS
TO E-6324
CS 173 17/1 ALDEHYDE OVERHEAD VAPOR
SS 513 65-M-1053
EVAPORATOR CONDENSATE E-6523 FROM C-6560
3 126 25/1 159 25/1 3
65-M-1051 575 134
112 17/1 FC SS 157 17/1
TO TK-6550 SS EXTRACTION STEAM
> 561 65-M-1054
FROM C-6535
159 25/1
FC CS E-6522
SS
157 17/1 CONDENSATE
METHANE
OSBL 0.51 65-M-1056
123 25/1 TO C-6538 THIS DRAWING IS TO BE USED FOR
FT CS SS FC SS 126 17/1 METALLURGICAL SELECTION ONLY.
STEAM EXTRACTION STEAM
69-M-1091 552 65-M-1055 FOR ALL OTHER DATA REFER TO THE
112 25/1
FROM V-6920
FT CS SS FROM C-6537 PFD.
FC 112 17/1 SS 119
SL CONDENSATE
E-6521 65-M-1056
FC 113 25/1 TO V-6538
EXTRACTION STEAM SS SS 101 17/1
65-M-1055 503 CONDENSATE
4 FROM C-6537 C-6510 528 65-M-1056 4
126
SS FROM P-6535A/B
SETPOINT 25/1 99
65-M-1053
17/1 85
SS Scientific Design Co., Inc.
TO C-6531 STEAM FC 73 25/1 Little Ferry, New Jersey
LC 63 17/1 SD Project No. 53133
SS CS 51 45
SS
WASTE WATER
WR 539 69-M-1093
TO WASTE WATER SUMP
39 CS
HC E-6520
WC
FC
SS FC 1 03/28/16 PER CLIENT COMMENTS
65 25/1 E-6560
SS REV DATE REVISIONS APPR.
55 17/1 This drawing and all information thereon is the property of "United" and shall not be
502 LEVEL CONTROL reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
other than that for which it is specifically furnished without the priorwritten consent
65-M-1053 of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 to "United.". 5
P-6510A/B
FROM C-6531 LC This space is reserved for the Arabic translation of the above paragraph.
65-M-1053
TO R-6520 PRESSURE CONTROL VALVE

JUBAIL UNITED
PETROCHEMICAL COMPANY
JUPC EG-III
MATERIAL OF CONSTRUCTION DIAGRAM
ETHYLENE GLYCOL PLANT
6 GLYCOL REACTION 6

SCALE: None CHECKED: EG

DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
FILENAME: 53133-65-M-1052
SHT.: REV.
DWG. 65-M-1052 1
A B C D E F G H J K
 A B C D E F G H J K

V-6531 C-6531 E-6532 V-6533 E-6533 MOC NOTES:

FIRST EFFECT FIRST EFFECT SECOND EFFECT THIRD EFFECT THIRD EFFECT 1. CS=CARBON STEEL
REBOILER COND. EVAPORATOR REBOILER EVAPORATOR COND. REBOILER SS=304 ST. STEEL, UNLESS OTHERWISE
DRUM S: SS STATED.
DRUM SHELL: 304L SS S: SS
T: 90/10 Cu/Ni T: 90/10 Cu/Ni 2. FOR HEAT EXCHANGERS (SHELL & TUBE):
1 CS + 3 mm INTERNALS: SS 304L SS 1
PACKING: 304L SS TS: SS TS: SS S=SHELLSIDE MOC
E-6531 V-6532 C-6532 C-6560 C-6533 T=TUBE MOC
FIRST EFFECT SECOND EFFECT SECOND EFFECT ALDEHYDE TS=TUBE SHEET MOC
THIRD EFFECT
3. CORROSION ALLOWANCES FOR PIPING:
REBOILER EVAPORATOR COND. EVAPORATOR STRIPPER EVAPORATOR CS=1.25 mm
S: CS +1.5 mm DRUM SHELL: 304L SS SHELL & SHELL: 304L SS ST. STEEL PIPING=0 mm
T: 90/10 Cu/Ni 304L SS INTERNALS: SS INTERNALS: SS INTERNALS: SS
TS: SS PACKING: 304L SS PACKING: 304L SS PACKING: 304L SS

93 25/1
93 17/1 SS SS
TREATED WATER TREATED WATER
65-M-1051 530 65-M-1054
2 FROM E-6552 531 532 SS TO C-6534/C-6535 2
ALDEHYDE STRIPPER OVHDS
SS SS 513 65-M-1052
201 25/1 191 25/1 TO E-6523
FC
FC
25/1 186 17/1 SS 179 17/1 SS SS SS NON CONDENSIBLE VENT
14.6 11.6 25/1
533 515 OSBL
506 511 180 PRESSURE (barg)
25/1
10.2 17/1 8.4 17/1 SS
FC 172 17/1
SS THIRD EFFECT OVHDS
MEG RECYCLE 25/1 9 65-M-1054 TEMPERATURE - oC
518
66-M-1064 622 TO E-6534
P-6623A/B 17/1 6.9

CONTROL SIGNAL
65-M-1052 <
FROM R-6520 FEED FC
SS
SS 195 PC
GLYCOL RX OUTLET
3 65-M-1052 505 25/1 190
3
FROM R-6520 17/1 173

SS

TO R-6520 FEED CONTROL

65-M-1052 LC C-6531 LC C-6532 LC
THIS DRAWING IS TO BE USED FOR
C-6533
METALLURGICAL SELECTION ONLY.
C-6560
FOR ALL OTHER DATA REFER TO THE
FROM C-6510 LEVEL CONTROL CS SS SS 11.6 25/1
PFD.

SS
65-M-1052 FC 193 25/1
200 25/1 181 17/1 183 25/1
SM
E-6531
SS 185 17/1
7.6 17/1 SS SS 174 17/1
517 11.6 25/1 THIRD EFFECT BOTTOMS
25/1 17/1
SS 25/1 516 521 65-M-1054
19.64 202 14.6 10.2 TO E-6534
7.6 17/1
4 188 E-6532 SS SS 190 25/1 E-6533
4
CS

FC 17/1
178
17/1
LC
LC V-6531 V-6532 V-6533 SS Scientific Design Co., Inc.
LC SM
Little Ferry, New Jersey
190 25/1 CS SD Project No. 53133
SCM
510
173 17/1
SS
200 25/1 SS CONDENSATE
214 185 17/1 514 65-M-1054
CS 509 TO V-6534

3 09/07/16 REVISED PER EPDP MEETING

2 04/05/16 PER CLIENT COMMENTS
1 03/28/16 PER CLIENT COMMENTS
REV DATE REVISIONS APPR.
This drawing and all information thereon is the property of "United" and shall not be
reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
other than that for which it is specifically furnished without the priorwritten consent
of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 to "United.". 5
This space is reserved for the Arabic translation of the above paragraph.

JUBAIL UNITED
PETROCHEMICAL COMPANY
JUPC EG-III
MATERIAL OF CONSTRUCTION DIAGRAM
ETHYLENE GLYCOL PLANT
6 1ST - 3RD EFFECT EVAPORATORS 6

SCALE: None CHECKED: EG

DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
FILENAME: 53133-65-M-1053
SHT.: REV.
DWG. 65-M-1053 3
A B C D E F G H J K
 A B C D E F G H J K

V-6534 C-6534 E-6535 MOC NOTES:

FOURTH EFFECT FOURTH EFFECT FIFTH EFFECT 1. CS=CARBON STEEL
REBOILER COND. EVAPORATOR REBOILER SS=304 ST. STEEL, UNLESS OTHERWISE
STATED.
DRUM SHELL: 304L SS S: SS 2. FOR HEAT EXCHANGERS (SHELL & TUBE):
1 304L SS INTERNALS: SS T: 90/10 Cu/Ni 1
PACKING: 304L SS TS: SS S=SHELLSIDE MOC
T=TUBE MOC
E-6534 V-6535 C-6535 TS=TUBE SHEET MOC
FOURTH EFFECT FIFTH EFFECT FIFTH EFFECT 3. CORROSION ALLOWANCES FOR PIPING:
REBOILER REBOILER COND. EVAPORATOR CS=1.25 mm
S: SS DRUM SHELL: 304L SS ST. STEEL PIPING=0 mm
T: 90/10 Cu/Ni 304L SS INTERNALS: SS
TS: SS PACKING: 304L SS

SS
NONCONDENSIBLE VENT
519 OSBL

2 SS NONCONDENSIBLE VENT 2
523 OSBL

SS
TREATED REFLUX PRESSURE (barg)
65-M-1055
159 25/1 TO C-6536/6537
171 25/1 535 157 17/1
SS TEMPERATURE - oC
FIFTH EFFECT OVHDS
165 17/1 SS 65-M-1055
537
FC TO E-6536
522
25/1 6.8 526 SS
4.8 25/1 EXTRACTION STEAM
561 65-M-1052
17/1 5.6
SS FC SS 4.3 17/1
TO E-6522
TREATED WATER
65-M-1053 534
3 FROM E-6552
3
SS

SS THIS DRAWING IS TO BE USED FOR

SS METALLURGICAL SELECTION ONLY.
SS SS FOR ALL OTHER DATA REFER TO THE
THIRD EFFECT OVHDS C-6534
C-6535
PFD.
65-M-1053 518
LC LC
FROM C-6533

SS SS SS E-6535
CONDENSATE E-6534 SS
65-M-1053 514 173 25/1
4 FROM V-6533 167 17/1 4
25/1 9 SS 25/1 6.8 SS SS 25/1 162
SS
17/1 160 FIFTH EFFECT BTMS Scientific Design Co., Inc.
17/1 6.9 17/1 5.6 V-6535 LC
V-6534 LC 529 65-M-1055
Little Ferry, New Jersey
SS TO E-6536
SD Project No. 53133
25/1 180
183 25/1
SS 17/1 170
25/1 169 SS
174 17/1 520 17/1 163 CONDENSATE
THIRD EFFECT BTMS SS 524 65-M-1055
65-M-1053 521 TO V-6536
FROM, C-6533 525

1 03/28/16 PER CLIENT COMMENTS

REV DATE REVISIONS APPR.
This drawing and all information thereon is the property of "United" and shall not be
reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
other than that for which it is specifically furnished without the priorwritten consent
of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 to "United.". 5
This space is reserved for the Arabic translation of the above paragraph.

JUBAIL UNITED
PETROCHEMICAL COMPANY
JUPC EG-III
MATERIAL OF CONSTRUCTION DIAGRAM
ETHYLENE GLYCOL PLANT
6 4TH AND 5TH EFFECT EVAPORATORS 6

SCALE: None CHECKED: EG

DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
FILENAME: 53133-65-M-1054
SHT.: REV.
DWG. 65-M-1054 1
A B C D E F G H J K
 A B C D E F G H J K

V-6536 C-6536 E-6537 MOC NOTES:

SIXTH EFFECT SIXTH EFFECT SEVENTH EFFECT 1. CS=CARBON STEEL
REBOILER COND. EVAPORATOR REBOILER SS=304 ST. STEEL, UNLESS OTHERWISE
DRUM SHELL: 304L SS STATED.
S: SS 2. FOR HEAT EXCHANGERS (SHELL & TUBE):
1 304L SS INTERNALS: SS T: 90/10 Cu/Ni 1
PACKING: 304L SS TS: SS S=SHELLSIDE MOC
E-6536 V-6537 C-6537 T=TUBE MOC
SIXTH EFFECT SEVENTH EFFECT TS=TUBE SHEET MOC
SEVENTH EFFECT 3. CORROSION ALLOWANCES FOR PIPING:
REBOILER REBOILER COND. EVAPORATOR CS=1.25 mm
S: SS DRUM SHELL: 304L SS ST. STEEL PIPING=0 mm
T: 90/10 Cu/Ni 304L SS INTERNALS: SS
TS: SS PACKING: 304L SS

SS
NONCONDENSIBLE VENT
571 OSBL
SS
2 NONCONDENSIBLE VENT 2
SS 572 66-M-1061
EXTRACTION STEAM
TO E-6611
65-M-1052 503
TO C-6510 FC
SS NNF
ALTERNATE TREATED WATER
EXTRACTION STEAM PRESSURE (barg)
65-M-1056
63-M-1031 546 144 123 25/1
25/1 TO C-6538
TO C-6310
SS 146 17/1
SS 569 126 17/1 SS TEMPERATURE - oC
SEVENTH EFFECT OVHDS
EXTRACTION STEAM
570 65-M-1056
62-M-1021 573 576
FC TO E-6538
TO E-6223
25/1 3.0
SS SS
563 PC
566 EXTRACTION STEAM
SS 1.2
65-M-1052
17/1 2.7 552
SS FC SS TO E-6521
TREATED WATER
65-M-1054 568
3 FROM E-6552 3
SS SS

SS THIS DRAWING IS TO BE USED FOR

SS METALLURGICAL SELECTION ONLY.
SS SS FOR ALL OTHER DATA REFER TO THE
FIFTH EFFECT OVHDS C-6536
65-M-1054 537 C-6537 PFD.
LC LC
FROM C-6535

SS SS SS E-6537
CONDENSATE E-6536 SS
65-M-1054 524 150 25/1
FROM V-6535 150 17/1
4 SS 25/1 SS 4
25/1 4.8 3 SS 133 25/1
138 17/1 SS
SEVENTH EFFECT BTMS
17/1 4.3 17/1 2.7
V-6537
Scientific Design Co., Inc.
V-6536 LC LC 567 65-M-1056
Little Ferry, New Jersey
SS TO E-6538A/B
SD Project No. 53133
25/1 158
162 25/1 25/1 144 SS
160 17/1 SS 17/1 154 562 17/1 141 CONDENSATE
FIFTH EFFECT BTMS SS 565 65-M-1056
65-M-1054 529 TO V-6538
FROM C-6535 564

1 03/28/16 PER CLIENT COMMENTS

REV DATE REVISIONS APPR.
This drawing and all information thereon is the property of "United" and shall not be
reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
other than that for which it is specifically furnished without the priorwritten consent
of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 to "United.". 5
This space is reserved for the Arabic translation of the above paragraph.

JUBAIL UNITED
PETROCHEMICAL COMPANY
JUPC EG-III
MATERIAL OF CONSTRUCTION DIAGRAM
ETHYLENE GLYCOL PLANT
6 6TH AND 7TH EFFECT EVAPORATORS 6

SCALE: None CHECKED: EG

DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
FILENAME: 53133-65-M-1055
SHT.: REV.
DWG. 65-M-1055 1
A B C D E F G H J K
 A B C D E F G H J K

P-6535A/B E-6538A/B P-6530A/B P-6538A/B MOC NOTES:

EVAPORATOR EIGHTH EFFECT CONCENTRATED EVAPORATOR 1. CS=CARBON STEEL
CONDENSATE PUMPS REBOILER GLYCOL PUMPS HOTWELL PUMPS SS=304 ST. STEEL, UNLESS OTHERWISE
S: SS STATED.
CASE: SS CASE: SS CASE: SS
IMPELLER: SS T: 304L SS IMPELLER: SS IMPELLER: SS 2. FOR HEAT EXCHANGERS (SHELL & TUBE):
1 1
TS: 304L SS S=SHELLSIDE MOC
V-6538 C-6538 E-6539 SU-6538 T=TUBE MOC
EIGHTH EFFECT EIGHTH EFFECT EIGHTH EFFECT TS=TUBE SHEET MOC
EVAPORATOR
3. CORROSION ALLOWANCES FOR PIPING:
REBOILER COND. EVAPORATOR CONDENSER HOTWELL CS=1.25 mm
DRUM SHELL: 304L SS S: SS 304L SS ST. STEEL PIPING=0 mm
304L SS INTERNALS: SS T: 304L SS
PACKING: 304L SS TS: 304L SS

SS
NON CONDENSIBLE VENT
SS 527 66-M-1061
ALTERNATE TREATED WATER
NNF TO E-6611
65-M-1054
2 FROM E-6552 59 SS CS 2
51
540
SS AIR LEAKAGE WR
SEVENTH EFFECT OVHDS SS
E-6539 CONDENSER VENT
65-M-1055 570
140 541 66-M-1061 PRESSURE (barg)
FROM C-6537 mm Hg
39 CS TO EJ-6612

TEMPERATURE - oC
FC
C-6538
FC SS WC

549

SS
CONDENSATE SS
65-M-1052
FROM E-6522
SS
3 CONDENSATE SS 3
MEG RECYCLE
62-M-1021
SS SS NNF
FROM P-6223A/B 66-M-1065
FROM C-6630
SS
CONDENSATE
65-M-1052 SS TC LC
FROM E-6521 E-6538A/B THIS DRAWING IS TO BE USED FOR
542
SS METALLURGICAL SELECTION ONLY.
CONDENSATE ATM
65-M-1055 565 SS SS FC SS FOR ALL OTHER DATA REFER TO THE
FROM V-6537 ALTERNATE REFLUX PFD.
0.58 66-M-1061
90 45 550
LEVEL TO F-6610A/B

NNF
65-M-1051 V-6538 FC SS
TO LEVEL CONTROL VALVE
LC CS CRUDE GLYCOL
133 25/1 545 66-M-1061
138 17/1 SS SS TO E-6610A/B
4 SEVENTH EFFECT BOTTOMS 4
HOTWELL CONDENSATE
65-M-1055 567
551 65-M-1051
FROM C-6537 113 25/1 Scientific Design Co., Inc.
SS 548 TO TK-6540
CONDENSATE 101 17/1 SS LC SS 45 SS Little Ferry, New Jersey
65-M-1052 528 SD Project No. 53133
TO E-6520 SU-6538

P-6535A/B P-6530A/B SS P-6538A/B

1 03/28/16 PER CLIENT COMMENTS

REV DATE REVISIONS APPR.
This drawing and all information thereon is the property of "United" and shall not be
reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
other than that for which it is specifically furnished without the priorwritten consent
of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 to "United.". 5
This space is reserved for the Arabic translation of the above paragraph.

JUBAIL UNITED
PETROCHEMICAL COMPANY
JUPC EG-III
MATERIAL OF CONSTRUCTION DIAGRAM
ETHYLENE GLYCOL PLANT
6 EIGHTH EFFECT EVAPORATOR 6

SCALE: None CHECKED: EG

DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
FILENAME: 53133-65-M-1056
SHT.: REV.
DWG. 65-M-1056 1
A B C D E F G H J K
 A B C D E F G H J K

E-6615 P-6615 C-6610 V-6610 E-6611 SU-6610 E-6613 MOC NOTES:

CRUDE GLYCOL TANK CRUDE GLYCOL DRYING COLUMN DRYING COLUMN DRYING COLUMN DRYING COLUMN CRUDE GLYCOL 1. CS=CARBON STEEL
FEED COOLER PUMP SHELL: 304L SS REBOILER CONDENSER HOTWELL HEATER SS=304 ST. STEEL, UNLESS OTHERWISE
TRAYS: SS CONDENSATE DRUM S: SS S: SS STATED.
S: SS CASE: SS CS + 3 mm
T: 304L SS IMPELLER: SS PACKING & INTERNALS: 304L SS CS + 3 mm T: 304L SS T: 304L SS 2. FOR HEAT EXCHANGERS (SHELL & TUBE):
1 1
TS: 304L SS TS: 304L SS TS: 304L SS S=SHELLSIDE MOC
T=TUBE MOC
TK-6615A/B F-6610A/B E-6610 P-6610A/B EJ-6612 EJ-6612A TS=TUBE SHEET MOC
P-6611A/B
3. CORROSION ALLOWANCES FOR PIPING:
CRUDE GLYCOL DRYING COLUMN DRYING COLUMN DRYING COLUMN DRYING COLUMN DRYING COLUMN DRYING COLUMN CS=1.25 mm
TANKS FEED FILTERS REBOILER BOTTOMS PUMPS VACUUM PUMP REFLUX PUMPS EJECTOR SYSTEM ST. STEEL PIPING=0 mm
CS + 3 mm COATED WITH HOUSING: SS S: CS + 1.5 mm CASE: SS SYSTEM CASE: SS STEAM CHEST: CS
FLAME STRAYED ALUMINUM FILTER: SS T: DUPLEX 2205 IMPELLER: SS 316 SS IMPELLER: SS OTHERS: SS
INTERNALS: SS TS: 304L SS

SS FC SS CS
45
ALTERNATE REFLUX
65-M-1056 550 SM
FROM P-6538A/B
2 SS SS 39 2
NNF
CONDENSER VENT WC
65-M-1056 541 NL
FROM E-6539 CS
SS
NONCONDENSIBLE VENT CS PRESSURE (barg)
65-M-1056 572
FROM E-6537 EJ-6612
SS CS TEMPERATURE - oC
NONCONDENSIBLE VENT mm Hg
FC
65-M-1056 527 105 SS 45
WR
FROM E-6538A/B
49
59
SS 613

601 CS CS
39
SS SS WR 49 EJ-6612A
MEG PRODUCT SS PC 140 mm Hg WC
3 66-M-1062 51 WR 3
FROM P-6622A/B 603 AIR LEAKAGE
608 39 SS
E-6611
144 WC
MAKE-UP SS
TEG
NNF
SS TC
CS SS
91 SS SS 121
CRUDE GLYCOL NNF
SS
65-M-1056 545 C-6610 SS THIS DRAWING IS TO BE USED FOR
FROM P-6530A/B NNF
NNF 51 DES E-6613 METALLURGICAL SELECTION ONLY.
F-6610A/B WASTE WATER
NNF

616 FOR ALL OTHER DATA REFER TO THE

SS
CS
45 NOR
WR
CS FC CS SS 604 69-M-1093
100
SS PFD.
CS 17
SS
TO WASTE WATER SUMP
CS NL mm Hg 15 SS SI 164 CS DRYING COL'N BOTTOMS
PC
SS 225 1
602 66-M-1062
E-6615
COOLING WATER
45 NOR
FC
MEG PRODUCT CS ATM
TO F-6620A/B
85 66-M-1063 E-6610 45
66-M-1063 603
TO E-6622

CS
4 FROM E-6622 CS 4
CS LC SS
CS CS SS V-6610
SCM
LC 45 Scientific Design Co., Inc.
GLYCOL
TK-6615A/B SU-6610 Little Ferry, New Jersey
69-M-1094
P-6615
FROM P-6971A/B SD Project No. 53133

CS SS
P-6610A/B P-6611A/B
SET POINT
66-M-1062
TO C-6620 FEED FC
3 09/07/16 REVISED PER EPDP MEETING
2 04/05/16 PER CLIENT COMMENTS
1 03/28/16 PER CLIENT COMMENTS
REV DATE REVISIONS APPR.
This drawing and all information thereon is the property of "United" and shall not be
reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
other than that for which it is specifically furnished without the priorwritten consent
of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 to "United.". 5
This space is reserved for the Arabic translation of the above paragraph.

JUBAIL UNITED
PETROCHEMICAL COMPANY
JUPC EG-III
MATERIAL OF CONSTRUCTION DIAGRAM
ETHYLENE GLYCOL PLANT
6 GLYCOL DRYING 6

SCALE: None CHECKED: EG

DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
FILENAME: 53133-66-M-1061
SHT.: REV.
DWG. 66-M-1061 3
A B C D E F G H J K
 A B C D E F G H J K

P-6625A/B C-6620 E-6621 V-6621 P-6624A/B P-6621A/B P-6622A/B MOC NOTES:

MEG COLUMN CONDENSER MEG COLUMN MEG COLUMN MEG COLUMN MEG COLUMN MEG COLUMN MEG PRODUCT 1. CS=CARBON STEEL
BLOWDOWN PUMPS SHELL & INTERNALS: SS CONDENSER REFLUX DRUM REBOILER CIRCULATION REFLUX PUMPS PUMPS SS=304 ST. STEEL, UNLESS OTHERWISE
PACKING: 304L SS S: 304L SS PUMPS CASE: SS CASE: SS STATED.
CASE: SS SS
IMPELLER: SS T: 304L SS CASE: 316L SS IMPELLER: SS IMPELLER: SS 2. FOR HEAT EXCHANGERS (SHELL & TUBE):
1 1
TS: 304L SS IMPELLER: 316L SS S=SHELLSIDE MOC
F-6620A/B E-6620 F-6624A/B E-6624 P-6620A/B V-6620 T=TUBE MOC
MEG COLUMN MEG COLUMN MEG COLUMN MEG COLUMN MEG COLUMN REBOILER TS=TUBE SHEET MOC
MEG COLUMN
CONDENSATE DRUM 3. CORROSION ALLOWANCES FOR PIPING:
FEED FILTERS REBOILER REBOILER FILTERS REBOILER PREHEATER BOTTOMS PUMPS
CS + 3 mm CS=1.25 mm
HOUSING: SS S: CS + 1.5 mm HOUSING: SS S: CS + 1.5 mm CASE: SS
IMPELLER: SS ST. STEEL PIPING=0 mm
FILTER: SS T: DUPLEX 2205 FILTER: SS T: DUPLEX 2205
TS: 304L SS TS: SS

PC
2 SS TC SS SS 135
2
STEAM 121 MEG CONDENSER VENT
63-M-1031 618 607 66-M-1064
TO C-6310 TO E-6623
CS
NL SS
E-6621 PRESSURE (barg)

SS 605
LC 135 SS TEMPERATURE - oC
CYCLE WATER 105
V-6621
63-M-1031 304
FROM P-6310A/B
121
143 SS
LC

SS
PC MEG REFLUX FLOW
110
3 135 SS FC FF 66-M-1063 3
mm Hg
AIR LEAKAGE TO MEG PROD. FLOW CONTROL

SS
FROM C-6610 LEVEL CONTROL 144
SS SS
66-M-1061 MEG PRODUCT
66-M-1061
TO E-6613
FC THIS DRAWING IS TO BE USED FOR
SS 164 C-6620
DRYING COL'N BOTTOMS CS METALLURGICAL SELECTION ONLY.
66-M-1061 602 FOR ALL OTHER DATA REFER TO THE
FROM P-6610A/B
F-6620A/B
TC FC SM SS PFD.
SS MEG COL BOTTOMS
66-M-1065
SS SS TO C-6630
BLOWDOWN 150
65-M-1051 619 FC
TO E-6552 mm Hg CS
4 SS E-6620 SM 4
BLOWDOWN SS
63-M-1031
NNF
LC CS E-6624
SS 624
TO C-6310 FC Scientific Design Co., Inc.
V-6620 Little Ferry, New Jersey
606
FC CS CS SD Project No. 53133
170 SCM
SS
SS
SS F-6624A/B
P-6624A/B
P-6625A/B 2 04/05/16 PER CLIENT COMMENTS
P-6620A/B P-6621A/B P-6622A/B
1 03/28/16 PER CLIENT COMMENTS
REV DATE REVISIONS APPR.
This drawing and all information thereon is the property of "United" and shall not be
reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
other than that for which it is specifically furnished without the priorwritten consent
of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 to "United.". 5
This space is reserved for the Arabic translation of the above paragraph.

JUBAIL UNITED
PETROCHEMICAL COMPANY
JUPC EG-III
MATERIAL OF CONSTRUCTION DIAGRAM
ETHYLENE GLYCOL PLANT
6 GLYCOL PURIFICATION 6

SCALE: None CHECKED: EG

DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
FILENAME: 51331-66-M-1062
SHT.: REV.
DWG. 66-M-1062 2
A B C D E F G H J K
 A B C D E F G H J K

E-6622 TK-6640A/B MOC NOTES:

MEG PRODUCT MEG COLUMN 1. CS=CARBON STEEL
COOLER SS=304 ST. STEEL, UNLESS OTHERWISE
RUNDOWN TANKS
S: SS STATED.
SS
T: 304L SS 2. FOR HEAT EXCHANGERS (SHELL & TUBE):
1 1
TS: 304L SS S=SHELLSIDE MOC
V-6640 P-6640A/B T=TUBE MOC
MEG COLUMN TS=TUBE SHEET MOC
MEG PRODUCT
3. CORROSION ALLOWANCES FOR PIPING:
RESIN DRUM TRANSFER PUMPS CS=1.25 mm
SHELL: SS CASE: SS
INTERNALS: SS ST. STEEL PIPING=0 mm
IMPELLER: SS

MEG REFLUX FLOW

2 66-M-1062 2
FROM MEG REFLUX FLOW CONTROL

WC PRESSURE (barg)
CS
TEMPERATURE - oC
39
FC
SS 100 48 SS
MEG PRODUCT
66-M-1061
FROM E-6613
E-6622

3 51 DES 3

COOLING WATER
CS 45 NOR

66-M-1061
TO E-6615

CS
THIS DRAWING IS TO BE USED FOR
NL
V-6640 METALLURGICAL SELECTION ONLY.
PC FOR ALL OTHER DATA REFER TO THE
PFD.
SS SS

4 4

SS Scientific Design Co., Inc.

TK-6640A/B
SS MEG PRODUCT
627 OSBL Little Ferry, New Jersey
TO OSBL STORAGE SD Project No. 53133

P-6640A/B

1 03/28/16 PER CLIENT COMMENTS

REV DATE REVISIONS APPR.
This drawing and all information thereon is the property of "United" and shall not be
reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
other than that for which it is specifically furnished without the priorwritten consent
of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 to "United.". 5
This space is reserved for the Arabic translation of the above paragraph.

JUBAIL UNITED
PETROCHEMICAL COMPANY
JUPC EG-III
MATERIAL OF CONSTRUCTION DIAGRAM
ETHYLENE GLYCOL PLANT
6 MEG PRODUCT RUNDOWN 6

SCALE: None CHECKED: EG

DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
FILENAME: 53133-66-M-1063
SHT.: REV.
DWG. 66-M-1063 1
A B C D E F G H J K
 A B C D E F G H J K

E-6623 EJ-6622 P-6623A/B MOC NOTES:

MEG COLUMN MEG COLUMN MEG COLUMN 1. CS=CARBON STEEL
EJECTOR PRECONDENSER VACUUM PUMP SYSTEM HOTWELL PUMPS SS=304 ST. STEEL, UNLESS OTHERWISE
STATED.
S: SS 316 SS CASE: SS 2. FOR HEAT EXCHANGERS (SHELL & TUBE):
1 T: 304L SS IMPELLER: SS 1
TS: 304L SS S=SHELLSIDE MOC
EJ-6622A SU-6620 T=TUBE MOC
MEG COLUMN MEG COLUMN TS=TUBE SHEET MOC
3. CORROSION ALLOWANCES FOR PIPING:
EJECTOR SYSTEM HOTWELL CS=1.25 mm
STEAM CHEST: CS SS ST. STEEL PIPING=0 mm
OTHERS: SS

SS

CS
2 SS 2
SM
NNF
135
SS
MEG CONDENSER VENT 39
CS SS
66-M-1062 607 VACUUM PUMP VENT
WC
FROM E-6621
625 67-M-1071
mm Hg
CS EJ-6622 TO SU-6710, SECT."B" PRESSURE (barg)

85
mm Hg 49 TEMPERATURE - oC
45 WR
45
NNF
CS
CS
SS
51 39 SS
WC
WR

3 E-6623
39 CS 3
WC EJ-6622A
MAKE-UP
TEG SS SS
CS SS VACUUM PUMP BLEED
615 67-M-1071
CS TO SU-6710, SECT. "B"
45 SS THIS DRAWING IS TO BE USED FOR
WR
SS VACUUM PUMP BLEED
METALLURGICAL SELECTION ONLY.
SS 49 610 620 66-M-1065
NNF FROM EJ-6632 FOR ALL OTHER DATA REFER TO THE
SS PFD.
MEG RECYCLE
SS 611 66-M-1065
FROM C-6630
609

4
SS SS 4
MEG RECYCLE
65-M-1053
SS 622
TO C-6531 Scientific Design Co., Inc.
SS Little Ferry, New Jersey
NNF MEG RECYCLE
SD Project No. 53133
65-M-1051
TO PK-6550
SU-6620 LC SS
C B A
2 04/05/16 PER CLIENT COMMENTS
P-6623A/B
CS CS 1 03/28/16 PER CLIENT COMMENTS
WASTE WATER REV DATE REVISIONS APPR.
NNF
69-M-1093 This drawing and all information thereon is the property of "United" and shall not be
TO WASTE WATER SUMP reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
other than that for which it is specifically furnished without the priorwritten consent
of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 to "United.". 5
This space is reserved for the Arabic translation of the above paragraph.

JUBAIL UNITED
PETROCHEMICAL COMPANY
JUPC EG-III
MATERIAL OF CONSTRUCTION DIAGRAM
ETHYLENE GLYCOL PLANT
6 MEG COLUMN EJECTOR 6

SCALE: None CHECKED: EG

DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
FILENAME: 53133-66-M-1064
SHT.: REV.
DWG. 66-M-1064 2
A B C D E F G H J K
 A B C D E F G H J K

E-6631 E-6630 EJ-6632A MOC NOTES:

MEG SPLITTER MEG SPLITTER MEG SPLITTER 1. CS=CARBON STEEL
CONDENSER REBOILER EJECTOR SYSTEM SS=304 ST. STEEL, UNLESS OTHERWISE
S: CS + 3 mm S: CS + 1.5 mm STATED.
CS 2. FOR HEAT EXCHANGERS (SHELL & TUBE):
1 T: CS + 3 mm T: 304L SS 1
TS: CS TS: 304L SS S=SHELLSIDE MOC
C-6630 P-6630A/B EJ-6632 T=TUBE MOC
MEG SPLITTER TS=TUBE SHEET MOC
MEG SPLITTER MEG SPLITTER
3. CORROSION ALLOWANCES FOR PIPING:
SHELL: CS + 3 mm BOTTOMS PUMPS VACUUM PUMP SYSTEM CS=1.25 mm
TRAYS: 410 SS CASE: SS 316 SS
IMPELLER: SS ST. STEEL PIPING=0 mm

SS

2 SS 2
SM
NNF

CS CS
SS
WC VENT
626 67-M-1071 PRESSURE (barg)
39
EJ-6632 TO SU-6710 SECT "B"
49
TEMPERATURE - oC
CS WR

WR NNF
NL

CS
SS 39 SS
CS CS AFTER COOLER
39 53
COOLING WATER WC 621 67-M-1071
69-M-1092
50 CS TO SU-6710 SECT "B"
3 3
FROM P-6910A/B
614 EJ-6632A
49 MAKE-UP
TEG
WR
E-6631 SS
SS SS
PC
VACUUM PUMP BLEED
10 NNF
620 66-M-1064 THIS DRAWING IS TO BE USED FOR
mm Hg TO SU-6620 SECT "B" METALLURGICAL SELECTION ONLY.
AIR LEAKAGE 22 91 SS FOR ALL OTHER DATA REFER TO THE
MEG RECYCLE
21
611 66-M-1064
PFD.
TO SU-6620 SECT "A"
170
SS C-6630 FC
MEG COLUMN BOTTOMS
66-M-1062 606 19
SS
FROM P-6620A/B
TC
FC CS NNF
MEG RECYCLE
65-M-1056
16
4 TO C-6538 4
TC 185 SS SM
1
Scientific Design Co., Inc.
72
Little Ferry, New Jersey
mm Hg
LC SD Project No. 53133
E-6630
SS FC
MEG SPLITTER BOTTOMS
174 SS SS 67-M-1071
612
TO C-6710

SCM 1 03/28/16 PER CLIENT COMMENTS

P-6630A/B REV DATE REVISIONS APPR.

CS This drawing and all information thereon is the property of "United" and shall not be
reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
other than that for which it is specifically furnished without the priorwritten consent
of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 to "United.". 5
This space is reserved for the Arabic translation of the above paragraph.

JUBAIL UNITED
PETROCHEMICAL COMPANY
JUPC EG-III
MATERIAL OF CONSTRUCTION DIAGRAM
ETHYLENE GLYCOL PLANT
6 MEG SPLITTER 6

SCALE: None CHECKED: EG

DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
FILENAME: 53133-66-M-1065
SHT.: REV.
DWG. 66-M-1065 1
A B C D E F G H J K
 A B C D E F G H J K

SU-6710 EJ-6712 E-6715 C-6710 E-6710 P-6711A/B P-6730A/B MOC NOTES:

DEG/TEG COLUMN DEG/TEG COLUMN CRUDE HEAVY DEG COLUMN DEG COLUMN DEG COLUMN DEG PRODUCT 1. CS=CARBON STEEL
HOTWELL VACUUM PUMP SYSTEM GLYCOL COOLER SHELL & INTERNALS: SS REBOILER REFLUX PUMPS TRANSFER PUMPS
SS=304 ST. STEEL, UNLESS OTHERWISE
SS 316 SS S: SS PACKING: 304L SS S: CS +1.5 mm CASE: SS CASE: SS
EJ-6712A P-6715 E-6711 P-6710A/B T: 304L SS E-6712 IMPELLER: SS TK-6730A/B IMPELLER: SS STATED.
T: 304L SS V-6730
2. FOR HEAT EXCHANGERS (SHELL & TUBE):
1 DEG/TEG COLUMN CRUDE HEAVY TS: 304L SS DEG COLUMN DEG COLUMN TS: 304L SS DEG PRODUCT DEG RUNDOWN DEG PRODUCT 1
BOTTOMS PUMPS COOLER TANKS S=SHELLSIDE MOC
EJECTOR SYSTEM GLYCOL PUMP CONDENSER RESIN DRUM
CASE: SS S: SS T=TUBE MOC
STEAM CHEST: CS CASE: SS S: SS SS SS
IMPELLER: SS T: 304L SS TS=TUBE SHEET MOC
OTHERS: SS IMPELLER: SS T: 304L SS
TS: 304L SS TS: 304L SS 3. CORROSION ALLOWANCES FOR PIPING:
CS=1.25 mm
SS SS ST. STEEL PIPING=0 mm
TEG COND. VENT TEG CATCHPAN PURGE
67-M-1072 710 708 67-M-1072
FROM E-6721 NNF FROM C-6720
CS
SM SS
WC WR

39
mm Hg
51 CS 39 CS
COOLING WATER
2 CS 49 EJ-6712
5 69-M-1092 2
SS 50
E-6711
FROM P-6910A/B
WR
709
CS
CS mm Hg NNF
PC 10 PRESSURE (barg)
CS CS DEG CATCHPAN PURGE
39
CS 69-M-1094
704
AIR TEMPERATURE - oC
49 LEAKAGE TO INCINERATION
WC LC VIA GLYCOL SUMP
EJ-6712A
WR SS
NL SS 131
SS
MAKE-UP
CS SS SS TEG
NNF SS
NNF
SS SS DEG COL'N BOTTOMS
705 67-M-1072
MEG SPLITTER BTMS SS SS FC
TO C-6720
66-M-1065 612 C-6710
FROM P-6630A/B 714
3 VACUUM PUMP
175 SS SS 3
66-M-1064 625
FROM EJ-6622 TC
SS SS CS 48 V-6730 SS DEG PRODUCT
VACUUM PUMP
NNF

mm Hg 188 FC 131 OSBL

66-M-1065 626 711 706 716
51
FROM EJ-6632
SS 25
VACUUM PUMP BLEED SS WC WR SM SS THIS DRAWING IS TO BE USED FOR
66-M-1064 615 ATM. SS
FROM EJ-6622 CS CS METALLURGICAL SELECTION ONLY.
SS
AFTER COOLER
39 E-6710 CS FOR ALL OTHER DATA REFER TO THE
66-M-1065 621 E-6715
CS CS
FROM EJ-6632A CS 51 CS NL PFD.
LC SCM
CS WR
FC PC

SS SS
E-6712
SU-6710 CS FC

4 WASTE WATER CS 178

701
4
SECT. "A"

69-M-1093 715
TO WASTE WATER SUMP
SS 39 SS
SECT. SECT.
"A"
CS SS TK-6730A/B Scientific Design Co., Inc.
"B" WC
Little Ferry, New Jersey
CS
SD Project No. 53133
P-6715 CS TK-6615B
P-6710A/B P-6711A/B
P-6730A/B

3 09/07/16 REVISED PER EPDP MEETING

2 04/05/16 PER CLIENT COMMENTS
1 03/28/16 PER CLIENT COMMENTS
REV DATE REVISIONS APPR.
This drawing and all information thereon is the property of "United" and shall not be
reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
other than that for which it is specifically furnished without the priorwritten consent
of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 to "United.". 5
This space is reserved for the Arabic translation of the above paragraph.

JUBAIL UNITED
PETROCHEMICAL COMPANY
JUPC EG-III
PROCESS FLOW DIAGRAM
ETHYLENE GLYCOL PLANT
6 DEG PURIFICATION 6

SCALE: None CHECKED: EG

DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
FILENAME: 53133-67-SD-1071
SHT.: REV.
DWG. 67-M-1071 3
A B C D E F G H J K
 A B C D E F G H J K

E-6721 P-6720A/B V-6740 TK-6740 P-6721A/B MOC NOTES:

TEG COLUMN TEG COLUMN TEG PRODUCT TEG RUNDOWN TEG COLUMN 1. CS=CARBON STEEL
CONDENSR BOTTOMS PUMPS RESIN DRUM TANK REFLUX PUMPS SS=304 ST. STEEL, UNLESS OTHERWISE
S: SS CASE: SS SS SS CASE: SS STATED.
T: 304L SS IMPELLER: SS IMPELLER: SS 2. FOR HEAT EXCHANGERS (SHELL & TUBE):
1 C-6720 E-6720 E-6722 P-6740A/B 1
TS: 304L SS S=SHELLSIDE MOC
TEG COLUMN TEG COLUMN TEG PRODUCT TEG PRODUCT T=TUBE MOC
SHELL & INTERNALS: SS REBOILER COOLER TRANSFER PUMPS TS=TUBE SHEET MOC
PACKING: 304L SS S: CS + 1.5 mm S: SS CASE: SS 3. CORROSION ALLOWANCES FOR PIPING:
T: 304L SS T: 304L SS IMPELLER: SS CS=1.25 mm
TS: 304L SS TS: 304L SS ST. STEEL PIPING=0 mm

SS
49 TEG CATCHPAN PURGE
CS CS (NOR)
39 51 (DES) 708 67-M-1071
COOLING WATER
TO C-6710
69-M-1092 WR CS
FROM P-6910A/B TEG CATCHPAN PURGE
2 SS E-6721
2
50 69-M-1094
TEG COND. VENT mm Hg
TO SU-6971
67-M-1071 710
10
TO EJ-6712 TEG COLUMN BOTTOMS
AIR 707 OSBL
LEAKAGE TO INCINERATION PRESSURE (barg)
LC

TEMPERATURE - oC
C-6720
WR

SS 48 NOR
DEG COL'N BOTTOMS
178 FC SS
49 DES
67-M-1071 705
FROM P-6710A/B 165 CS
TC E-6722 SS
194
3 mm Hg
3
FC
SM
25
SS SS
702
CS
48
LC E-6720 NL
CS
PC
CS 39 FC THIS DRAWING IS TO BE USED FOR
CS SS METALLURGICAL SELECTION ONLY.
SS SS TK-6740
TEG PRODUCT
SCM
181 FOR ALL OTHER DATA REFER TO THE
717 OSBL
SS PFD.
48
V-6740 SS
SS A B
FC WC
SS
P-6740A/B
4 4
P-6721A/B
P-6720A/B
SS Scientific Design Co., Inc.
Little Ferry, New Jersey
SD Project No. 53133

2 09/07/16 REVISED PER EPDP MEETING

1 03/28/16 PER CLIENT COMMENTS
REV DATE REVISIONS APPR.
This drawing and all information thereon is the property of "United" and shall not be
reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
other than that for which it is specifically furnished without the priorwritten consent
of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 to "United.". 5
This space is reserved for the Arabic translation of the above paragraph.

JUBAIL UNITED
PETROCHEMICAL COMPANY
JUPC EG-III
PROCESS FLOW DIAGRAM
ETHYLENE GLYCOL PLANT
6 TEG PURIFICATION 6

SCALE: None CHECKED: EG

DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
FILENAME: 53133-67-SD-1072
SHT.: REV.
DWG. 67-M-1072 2
A B C D E F G H J K
 A B C D E F G H J K

P-6930A/B E-6935 P-6925A/B P-6920A/B MOC NOTES:

BLOWDOWN SUSPECT CONDENSATE SUSPECT CONDENSATE CLEAN CONDENSATE 1. CS=CARBON STEEL
PUMPS COOLER PUMPS PUMPS SS=304 ST. STEEL, UNLESS OTHERWISE
CASE: CS + 3 mm S: CS + 3 mm CASE: CS + 3 mm CASE: CS + 3 mm STATED.
IMPELLER: CS V-6930 T: CS + 3 mm E-6930 IMPELLER: CS V-6920 IMPELLER: CS E-6920A/B 2. FOR HEAT EXCHANGERS (SHELL & TUBE):
1 1
BLOWDOWN TS: CS CLEAN CONDENSATE CONDENSATE BFW / CONDENSATE S=SHELLSIDE MOC
FLASH DRUM EXCHANGER T=TUBE MOC
COOLER FLASH DRUM
S: CS + 3 mm TS=TUBE SHEET MOC
CS + 3 mm S: CS + 3 mm CS + 3 mm 3. CORROSION ALLOWANCES FOR PIPING:
T: CS + 3 mm T: CS + 3 mm
TS: CS TS: CS CS=1.25 mm
ST. STEEL PIPING=0 mm
PC CS
160 CS SL
SUSPECT CONDENSATE
65-M-1052 120 LP STEAM
FROM E-6524
11 EOR 65-M-1052
TO C-6510
214 CS 10 SOR CS
2 SCM
2
FLASH STEAM 120 CS 192 CS 188 EOR
LC 184 SOR
62-M-1021 SCI 155 EOR
TO C-6220 CS SOR
CS 165
WB PRESSURE (barg)

1 TEMPERATURE - oC
1
105
CS
BOILER FEED WATER
OSBL
BLOWDOWN
235 SOR CS LC

61-M-1011 E-6920A/B
FROM V-6110 AND V-6120

V-6930
3 CS < PC 114 EOR CS 3
203 SOR
CS 1 116 SOR
BLOWDOWN
61-M-1011 CS START-UP BLOWDOWN
FROM V-6112 AND V-6122 V-6920
61-M-1011

SCL
CS 51
FROM P-6110/6120 AND
V-6112/6122
SL THIS DRAWING IS TO BE USED FOR
CS CS CS WR
51 LC
CS 100
METALLURGICAL SELECTION ONLY.
CS CS 100 WR FOR ALL OTHER DATA REFER TO THE
OSBL
BLOWDOWN 120
CS 120 PFD.
OSBL CS 120
E-6930
CS
TO DEMINERALIZER 39

39 WC
CS
E-6935
P-6930A/B
WC CS CONDENSATE
P-6925A/B P-6920A/B
4 CS 69-M-1093 4
TO E-6960
OSBL
FLOW CONTROL
62-M-1021 Scientific Design Co., Inc.
SELECTOR SWITCH Little Ferry, New Jersey
62-M-1021 SD Project No. 53133

2 09/07/16 REVISED PER EPDP MEETING

1 03/28/16 PER CLIENT COMMENTS
REV DATE REVISIONS APPR.
This drawing and all information thereon is the property of "United" and shall not be
reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
other than that for which it is specifically furnished without the priorwritten consent
of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 to "United.". 5
This space is reserved for the Arabic translation of the above paragraph.

JUBAIL UNITED
PETROCHEMICAL COMPANY
JUPC EG-III
MATERIAL OF CONSTRUCTION DIAGRAM
ETHYLENE GLYCOL PLANT
6 CONDENSATE SYSTEM 6

SCALE: None CHECKED: EG

DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
FILENAME: 53133-69-M-1091
SHT.: REV.
DWG. 69-M-1091 2
A B C D E F G H J K
 A B C D E F G H J K

P-6910A/B MOC NOTES:

V-6950
COOLING WATER HIGH PRESSURE 1. CS=CARBON STEEL
BOOSTER PUMPS NITROGEN SURGE DRUM SS=304 ST. STEEL, UNLESS OTHERWISE
CASE: CS + 3 mm K-6950 STATED.
CS + 3 mm 2. FOR HEAT EXCHANGERS (SHELL & TUBE):
1 IMPELLER: CS HIGH PRESSURE 1
NITROGEN COMPRESSOR S=SHELLSIDE MOC
CYLINDER: CAST IRON T=TUBE MOC
PISTON: FORGED STEEL TS=TUBE SHEET MOC
3. CORROSION ALLOWANCES FOR PIPING:
CS=1.25 mm
ST. STEEL PIPING=0 mm

CS 45 CS HP NITROGEN
WR WC 61-M-1011
7 TO MX-6110
CS AMB CS PC 60
NITROGEN
OSBL NL CS CS
2 CS HP NITROGEN
2
49 39
61-M-1011
TO V-6140

PRESSURE (barg)
PACKAGE BY VENDOR

AMB
3.5 TEMPERATURE - oC
DEMIN. WATER
SS
OSBL WP
V-6950

2.0
20% CAUSTIC
CS AMB

OSBL KC
CS 45

3 3

LINED CS
2.0
AMB
30% HCL
CS
OSBL HCL

THIS DRAWING IS TO BE USED FOR

METALLURGICAL SELECTION ONLY.
K-6950
FOR ALL OTHER DATA REFER TO THE
CS PFD.
COOLING WATER
66-M-1065
TO E-6631
CS 39 CS
COOLING WATER
39 CS 67-M-1071
4 TO E-6711
4
WC
CS
COOLING WATER Scientific Design Co., Inc.
66-M-1072 Little Ferry, New Jersey
P-6910A/B
TO E-6721 SD Project No. 53133

2 09/07/16 REVISED PER EPDP MEETING

1 03/28/16 PER CLIENT COMMENTS
REV DATE REVISIONS APPR.
This drawing and all information thereon is the property of "United" and shall not be
reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
other than that for which it is specifically furnished without the priorwritten consent
of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 to "United.". 5
This space is reserved for the Arabic translation of the above paragraph.

JUBAIL UNITED
PETROCHEMICAL COMPANY
JUPC EG-III
MATERIAL OF CONSTRUCTION DIAGRAM
ETHYLENE GLYCOL PLANT
6 HP NITROGEN SYSTEM 6
AND MISCELLANEOUS UTILITIES
SCALE: None CHECKED: EG
DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
FILENAME: 53133-69-M-1092
SHT.: REV.
DWG. 69-M-1092 2
A B C D E F G H J K
 A B C D E F G H J K

E-6960 P-6960A/B P-6970A/B P-6975A/B MOC NOTES:

PROCESS WATER PROCESS WATER WASTE WATER NEUTRALIZATION PUMPS 1. CS=CARBON STEEL
COOLER PUMPS PUMPS CASE: SS SS=304 ST. STEEL, UNLESS OTHERWISE
HEADER: CS + 3 mm CASE: SS CASE: 316 SS IMPELLER: SS STATED.
TK-6960 SU-6970 SU-6975 2. FOR HEAT EXCHANGERS (SHELL & TUBE):
1 TUBES: CS + 3 mm IMPELLER: SS IMPELLER: 316 SS 1
PROCESS WATER WASTE WATER NEUTRALIZATION SUMP S=SHELLSIDE MOC
TANK SUMP CAUSTIC - ACID PROOF T=TUBE MOC
CS WITH FLAME SPRAYED CAUSTIC - ACID PROOF CONCRETE PIT TS=TUBE SHEET MOC
ALUMINIUM + 3 mm CONCRETE PIT 3. CORROSION ALLOWANCES FOR PIPING:
CS=1.25 mm
ST. STEEL PIPING=0 mm
4. ACID PROOF PIPING OR TRENCH.

SS SS
E-6960
120 WP
2 CONDENSATE
2
69-M-1091
FROM P-6920A/B
CS
TK-6960
PRESSURE (barg)
60 SS
TEMPERATURE - oC

P-6960A/B

60
WASTE WATER (NOTE 4)
65-M-1051 538
FROM PK-6550 CS 45
WASTE WATER
3 CS 3
901 OSBL
WASTE WATER 45
66-M-1061 604 CS 60 WASTE WATER
FROM P-6611A/B
WASTE WATER
45 CS 902 OSBL

65-M-1052 539
FROM E-6560
45 SS THIS DRAWING IS TO BE USED FOR
WASTE WATER
63-M-1032 315
METALLURGICAL SELECTION ONLY.
FROM V-6320 FOR ALL OTHER DATA REFER TO THE
CS
GLYCOL WASTE
NNF
PFD.
69-M-1094
FROM P-6971A/B P-6970A/B P-6975A/B
WASTE WATER
SS
SU-6970 SU-6975
62-M-1021
FROM P-6222A/B

4 4

CS Scientific Design Co., Inc.

WASTE WATER
NNF Little Ferry, New Jersey
66-M-1064
FROM SU-6620 SD Project No. 53133

CS 45
WASTE WATER
67-M-1071 715
FROM SU-6710

CARRYOVER
SS
NNF 1 03/28/16 PER CLIENT COMMENTS
61-M-1012
REV DATE REVISIONS APPR.
FROM C-6115
This drawing and all information thereon is the property of "United" and shall not be
reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
other than that for which it is specifically furnished without the priorwritten consent
of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 to "United.". 5
This space is reserved for the Arabic translation of the above paragraph.

JUBAIL UNITED
PETROCHEMICAL COMPANY
JUPC EG-III
MATERIAL OF CONSTRUCTION DIAGRAM
ETHYLENE GLYCOL PLANT
6 PROCESS WATER SYSTEM 6
AND WASTE WATER SYSTEM
SCALE: None CHECKED: EG
DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
FILENAME: 53133-69-M-1093
SHT.: REV.
DWG. 69-M-1093 1
A B C D E F G H J K
 A B C D E F G H J K

SU-6972 SU-6971 MOC NOTES:

CARBONATE SUMP ETHYLENE GLYCOL 1. CS=CARBON STEEL
SS SUMP SS=304 ST. STEEL, UNLESS OTHERWISE
CONCRETE PIT STATED.
P-6972A/B WITH SS LINING P-6971A/B 2. FOR HEAT EXCHANGERS (SHELL & TUBE):
1 CARBONATE SUMP ETHYLENE GLYCOL 1
S=SHELLSIDE MOC
PUMPS SUMP PUMPS T=TUBE MOC
CASE: SS CASE: CS + 3 mm TS=TUBE SHEET MOC
IMPELLER: SS IMPELLER: CS 3. CORROSION ALLOWANCES FOR PIPING:
CS=1.25 mm
ST. STEEL PIPING=0 mm

2 SS SS 2
CARBONATE SOLUTION
62-M-1021
TO P-6230

PRESSURE (barg)
CS
SL
CS GLYCOL WASTE TEMPERATURE - oC
69-M-1093
TO SU-6970
SS
CS
GLYCOL
WP
66-M-1061
TO TK-6615
CS GLYCOL WATER
K 2 CO 3
OSBL
3 3
CS
CARRY OVER
V2O5 63-M-1031
SS
CS
GLYCOL DRAINS

H 3 BO 3
P-6972A/B
THIS DRAWING IS TO BE USED FOR
CS METALLURGICAL SELECTION ONLY.
GLYCOL PURGE
CARBONATE DRAINS 67-M-1071 FOR ALL OTHER DATA REFER TO THE
P-6971A/B
FROM C-6710 CATCHPAN PFD.
CS GLYCOL PURGE
67-M-1072
FROM C-6720 CATCHPAN

4 4

Scientific Design Co., Inc.

Little Ferry, New Jersey
SD Project No. 53133

SU-6972 SU-6971

1 03/28/16 PER CLIENT COMMENTS

REV DATE REVISIONS APPR.
This drawing and all information thereon is the property of "United" and shall not be
reproduced, copied, loaned, exhibited, disclosed or used in whole or in part for any purpose
other than that for which it is specifically furnished without the priorwritten consent
of "United". The drawing and any copies thereof (partial or complete) shall be returned
5 to "United.". 5
This space is reserved for the Arabic translation of the above paragraph.

JUBAIL UNITED
PETROCHEMICAL COMPANY
JUPC EG-III
MATERIAL OF CONSTRUCTION DIAGRAM
ETHYLENE GLYCOL PLANT
6 CARBONATE SUMP AND GLYCOL SUMP 6
COLLECTION SYSTEMS
SCALE: None CHECKED: EG
DATE: 03/11/16 APPROVED: SK
DRAWN: CAD APPROVED:
FILENAME: 53133-69-M-1094
SHT.: REV.
DWG. 69-M-1094 1
A B C D E F G H J K
 SCIENTIFIC DESIGN COMPANY, INC.
SABIC – Clariant Partnership Company

SD Project No. 53133

2.5

UTILITY SUMMARY

INDEX
Page

A. UTILITY CONSUMPTIONS 2.5 - 1

B. POWER REQUIREMENTS 2.5 - 2

C. COOLING WATER REQUIREMENTS 2.5 - 4

D. CHILLED WATER REQUIREMENTS 2.5 - 5

E. DEMINERIALIZED WATER REQUIREMENTS 2.5 - 6

F. NITROGEN REQUIREMENTS 2.5 - 7

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page 2.5 - 1
Rev.1 – 04/05/16
2.5

UTILITY SUMMARY

A. UTILITY CONSUMPTIONS

1 metric ton (mt) = 1,000 kg

Std m3 = Standard Cubic Meter (15 oC and 1.01325 Bara)

UNITS / HOUR
CASE 1 CASE 2
Utility Units SOR EOR SOR EOR MAXIMUM
o
HP Steam @ 44.8 barg and 400 C mt 7.0 7.0 5.0 5.0 130 1
MP Steam @ 21.4 barg and 271 oC mt 80.9 54.52 5.7 2.57 161.2 2
LP Steam @ 5.0 barg and 250 oC mt 3.3 1.7 3.6 5.0 40.9 2
Boiler Feed Water @ 70 barg and 105 oC m3 138.1 197.5 163.8 212.5 213 2
Desuperheater Water @ 70 barg and 105 oC m3 6.7 4.9 1.6 1.5 15
Power 3 22,052 22,052 22,052 22,052
kWh 24,920
(R-1) (R-1) (R-1) (R-1)
Cooling Water 4 m3 21,698 21,698 21,698 21,698 22,700
Chilled Water 5 m3 2571 2571 2571 2571 2571
Demineralized Water m3 9.09 9.09 9.09 9.09 114
o 3
Clean Condensate Export @ 100 C m 147.8 177.8 111.4 153.3 178
o 3
Suspect Condensate Export @ 100 C m 25.0 24.9 10.0 10.0 25
Blowdown Condensate Export @ 120 oC m3 2.3 3.2 2.7 3.4 4
Nitrogen @ 7 barg Std m3 433 433 443 443 2500 6,7

Plant Air Std m3 150 150 150 150 400 8

Instrument Air Std m3 300 300 300 300 400 8

1
During simultaneous heating of the two reactors only.
2
During EO reactor trip.
3
Excludes lighting, instrumentation and intermittent users.
4
Inlet temperature: 39 ºC; Temperature rise: 7.1 ºC (Case 1 Normal); 5.8 ºC (Case 2 Normal); 11.3 ºC (Design).
5
Inlet temperature: 27 ºC; Temperature rise: 8 ºC (Case 1 Normal); 7.2 ºC (Case 2 Normal); 10 ºC (Design).
6
During EO reactor system pressurization.
7
During pre-commissioning, 14,000 Std m3/h at 19 Barg pressure will be required to test the Oxygen Mixing Station Sparger
8
During pre-commissioning.

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page 2.5 - 2
Rev.1 – 04/05/16
B. POWER REQUIREMENTS

Case 1 Case 2 Assumed

Estimated
Estimated Estimated Motor
Item No. Description Connected
Normal Normal Efficiency
kW
BkW BkW % (R-1)
K-6115 Recycle Compressor 9,300 9,300 13,000 1
P-6110 Reactor Start-Up Pump [39.9] [39.9] [55]
P-6116A/B Wash Water Pumps 430 430 950 2 (Note 6)
P-6120 Reactor Start-Up Pump [39.9] [39.9] [55]

E-6221 Regenerator Condenser (Air Cooler) 215.9 215.9 250 2

P-6220A/B Carbonate Solution Pumps 2016 2016 4600 2
P-6221A/B Regenerator Condensate Pumps 97.5 97.5 220
Regenerator Precondenser Condensate
P-6222A/B 2.3 2.3 6 (Note 6)
Pumps
P-6223A/B Regenerator Extraction Reboiler 1.5 1.5 4.4
Condensate Pumps
P-6230 Carbonate Transfer Pump [56.6] [56.6] [75]

E-6311 Stripping Column Condenser (Air Cooler) 402.6 402.6 475 2

K-6315 Cycle Water Flash Drum Compressor 1,130 1,130 1,300 2
K-6320 Reclaim Compressor 778 778 900 2
P-6310A/B Stripping Column Bottoms Pumps 730 730 5,000 2
P-6311A/B Stripping Column Reflux Pumps 13.6 13.6 37 (Note 6)
P-6312A/B Cycle Water Pumps 1,455 1,455 -- 3
P-6320A/B Reabsorber Bottoms Pumps 518 518 1,340 2
PK-6335 Caustic Injection System [-] [-] [0.25] 4
PK-6336 Cycle Water Antifoam Injection System [-] [-] [0.25] 4

P-6510A/B Reactor Feed Pumps 837 837 2,000 2

P-6530A/B Concentrated Glycol Pumps 35 35 90
P-6535A/B Evaporator Condensate Pumps 79.6 79.6 180
P-6538A/B Evaporator Hotwell Pumps 31.2 31.2 74 (Note 6)
P-6540A/B Recycle Water Pumps 241 241 630 2
P-6550A/B Treated Water Pumps 54.4 54.4 150

EJ-6612 Drying Column Vacuum Pump System 120 120 132

EJ-6622 MEG Column Vacuum Pump System 60 60 75
EJ-6632 MEG Splitter Vacuum Pump System 320 320 355 2
P-6610A/B Drying Column Bottoms Pumps 29.9 29.9 74
P-6611A/B Drying Column Reflux Pumps 9.6 9.6 30
P-6615 Crude Glycol Tank Pump [23.9] [23.9] [30]
P-6620A/B MEG Column Bottoms Pumps 6.6 6.6 22 (Note 6)
P-6621A/B MEG Column Reflux Pumps 39.9 39.9 110
P-6622A/B MEG Product Pumps 11.3 11.3 30
P-6623A/B MEG Column Hotwell Pumps 36.5 36.5 90
P-6624A/B MEG Column Reboiler Circulation Pumps 147 147 400 2
P-6625A/B MEG Column Condenser Blowdown
6.6 6.6 22
Pumps
P-6630A/B MEG Splitter Bottoms Pumps 93.3 93.3 220
P-6640A/B MEG Product Transfer Pumps 69.8 69.8 180

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page 2.5 - 3
Rev.1 – 04/05/16
B. POWER REQUIREMENTS (Continued)

Case 1 Case 2 Assumed

Estimated
Estimated Estimated Motor
Item No. Description Connected
Normal Normal Efficiency
kW
BkW BkW % (R-1)
EJ-6712 DEG/TEG Columns Vacuum Pump System 520 520 670 2
P-6710A/B DEG Column Bottoms Pumps 188 188 500 2
P-6711A/B DEG Column Reflux Pumps 4.5 4.5 15
P-6715 Crude Heavy Glycol Pump [6.2] [6.2] [11] (Note 6)
P-6720A/B TEG Column Bottoms Pumps 45.1 45.1 110
P-6721A/B TEG Column Reflux Pumps 1.7 1.7 4.4
P-6730A/B DEG Product Transfer Pumps 18.3 18.3 60
P-6740A/B TEG Product Transfer Pumps 4.3 4.3 11

E-6960 Process Water Cooler (Air Cooler) 45.4 45.4 55

K-6950 High Pressure Nitrogen Compressor [18.5] [18.5] [30]
P-6910A/B Cooling Water Booster Pumps 90.3 90.3 220
P-6920A/B Clean Condensate Pumps 90.3 90.3 220
P-6925A/B Suspect Condensate Pumps 16.5 16.5 44 (Note 6)
P-6930A/B Blowdown Pumps 14 14 37
P-6960A/B Process Water Pumps 117 117 264
P-6970A/B Waste Water Pumps [14.2] [14.2] [37]
P-6971A/B Ethylene glycol Sump Pumps [6.5] [6.5] [22]
P-6972A/B Carbonate Sump Pumps [6.9] [6.9] [22]
P-6975A/B Neutralization Pumps [163] [163] [400] 2

Total Continuous 20,475 5 20,475 5

Total (including intermittent users) 20,850 5 20,850 5
Drawn kW @ motor efficiency
Total Continuous 22,052 5 22,052 5
Total (including intermittent user) 22,465 5 22,465 5

1
13,200 volts users.
2
4,000 volts users. All other motors are 460 volts users except where noted.
3
Common motor drives with P-6310A/B.
4
230 Volt User
5
Excludes lighting and instrumentation.
6
For Assumed Motor Efficiency please refer to Vol. VIII Section 8.2.
[ ] Indicates intermittent users

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page 2.5 - 4
Rev 3 – 09/07/2016

C. COOLING WATER REQUIREMENTS

Flowrate Temperature rise (°C)

(m³/h) Case 1 Case 2
Item No. Description (Note 1) Normal Normal Design
E-6116 (R-3) Wash Water Coolers (Plate and Frame) 1330.8 7 6.3 12
K-6115 Recycle Compressor 70 2 10 10 10
E-6313A-F Cycle Water Cooler (Plate and Frame) 5657 7.4 7 12
E-6321 (R-3) Reabsorber Water Cooler (Plate and Frame) 1585.3 0 1 12
E-6322 (R-3) Reabsorber Bottoms Cooler (Compabloc) 1943 4.2 5 5
E-6323 Reclaim Compressor Aftercooler 317.2 3 1.8 5
K-6315 Cycle Water Flash Drum Compressor 10 2 10 10 10
K-6320 Reclaim Compressor 90 2 4.1 3.3 10
E-6539 Eighth Effect Condensers 4854.1 10.4 5.3 12
E-6540 Recycle Water Cooler (Plate and Frame) 1585.3 9 5.1 12
E-6553A/B (R-3) Cycle Water Bleed Cooler (Plate and Frame) 219.7 1.1 1.3 12
E-6560 Aldehyde Stripper Waste Water Cooler 94.01 10.4 11.1 12
E-6611 Drying Column Condenser 1759 7.4 7.9 12
E-6615 Crude Glycol Tank Feed Cooler -- 3 0 0 12
E-6622 MEG Product Cooler 464 6.2 6.2 12
E-6623 MEG Column Ejector Precondenser 201.8 6.8 6.9 12
E-6631 MEG Splitter Condenser 276 6.2 10.5 12
EJ-6612A Drying Column Ejector System 24.7 2 0 0 12
EJ-6622A MEG Column Ejector System 61.5 2 0 0 12
EJ-6632A MEG Splitter Ejector System 58.8 2 0 0 12
E-6711 DEG Column Condenser 422.5 6.6 11 12
E-6712 DEG Product Cooler 56.3 6.3 10.5 12
E-6715 Crude Heavy Glycol Cooler 69.6 0 0 12
E-6721 TEG Column Condenser 49.4 5 9.5 12
E-6722 TEG Product Cooler 6.1 4.5 8.6 10
EJ-6712A DEG/TEG Column Ejector System 138.3 2 0 0 12

E-6930 Clean Condensate Cooler 307.5 12 9.8 12

E-6935 Suspect Condensate Cooler 44 10.7 4.3 12
K-6950 High Pressure Nitrogen Compressor 2.4 10 10 10

Total Cooling Water Requirement 21,698

Average Temperature Rise 7.1 5.8 11.3

1
Normal flowrate is the same as design
2
Estimated flowrate
3
The same cooling water flows in series through the MEG Product Cooler (E-6622) and the Crude Glycol Tank Feed Cooler
(E-6615) and therefore, is only counted once.

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page 2.5 - 5

D. CHILLED WATER REQUIREMENTS

Flowrate Temperature rise (°C)

(m³/h) Case 1 Case 2
Item No. Description (Note 1) Normal Normal Design
E-6314 Cycle Water Chiller Exchanger (Plate and 2570.6 8 7.2 10
Frame)

Total Chilled Water Requirement 2570.6

Average Temperature Rise 8 7.2 10

1
Normal flowrate is the same as design

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page 2.5 - 6
Rev.2 – 04/21/16
E. DEMINERALIZED WATER REQUIREMENTS

Flowrate (m3/h)
Item No. Description Case 1 Case 2
Max 1
Normal Normal
V-6110 Reactor Steam Drum (Filling) 4 (R-2) 0 0 33 2
V-6120 Reactor Steam Drum (Filling) 4 (R-2) 0 0 33 2
V-6112 Reactor Gas Cooler Steam Drum (Filling) 4 (R-2) 0 0 82
V-6122 Reactor Gas Cooler Steam Drum (Filling) 4 (R-2) 0 0 82

PK-6540 Recycle Water Tank 4 (R-2) 14.7 14.7 14.7

PK-6550 Cycle Water Treating Unit 4 (R-2) 29.4 5 29.4 5 322
SU-6972 Carbonate Sump 0.1 0.1 114
C-6220 Regenerator /Regenerator Feed Flash Drums 0 0 16 3
V-6221 Regenerator Condenser KO Drum 0 0 14
V-6311 Acid Scrubber 9 9 9
TK-6960 Process Water Tank (R-2) 0 0 100 2
Total 9.1 9.1

NOTES
1 Maximum flow rates do not occur simultaneously
2 During filling
3 During Demister Washing
4 Supplied by Process Water System (R-2)
5 Average flowrate per cycle time (R-2)

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page 2.5 - 7

F. NITROGEN REQUIREMENTS

Flowrate (Std m3/h)

7 Barg Nitrogen Users
Normal
Case 1 Case 2 Maximum 1
High Pressure Nitrogen Compressor (K-6950) 0 0 470
Ejector Control (EJ-6612, EJ-6622, EJ-6632 and EJ-6712) 353 353 710
Tank Padding 80 2 90 3 370
Vessel Purging 0 0 400
Total 433 443

1
Maximum flowrates do not occur simultaneously
2
Average flowrate
3
Average flowrate

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133

2.6

CONSUMPTION OF RAW MATERIALS, CATALYST AND

AUXILIARY CHEMICALS

INDEX
Page

A. RAW MATERIALS CONSUMPTION 2.6 - 1

B. CHEMICALS CONSUMPTION 2.6 - 1

C. INITIAL CHARGE OF CATALYST, RESINS AND CHEMICALS 2.6 - 2

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page 2.6 - 1

2.6

CONSUMPTION OF RAW MATERIALS, CATALYST AND

AUXILIARY CHEMICALS

A. RAW MATERIALS CONSUMPTION

Units/Hour
Feed Stream Units Case 1 (25/1) Case 2 (17/1)
SOR EOR SOR EOR Maximum
Ethylene ( 99.9 vol%) kg 48,203 51,070 51,828 54,617 65,540
Oxygen ( 99.8 vol%) kg 39,906 49,491 44,084 53,391 64,070
Methane ( 100 vol%), Ballast Gas kg 147 163 163 176 1,420

B. CHEMICALS CONSUMPTION (ESTIMATED)

Chemical Units Units/Year

Reactor Moderator (EC) kg 29,300
Potassium Carbonate (100%) kg 22,120 3
Boric Acid (100%) kg 1,820 3
Vanadium Pentoxide (100%) kg 3,640 3
CO2 Removal System Antifoam 1 kg 900
2
Cycle Water System Antifoam kg 3,000
Caustic Soda (20 wt% NaOH) mt 4,180
Hydrochloric Acid (30 wt% HCl) mt 1,390
Sodium Bisulphite (100 wt%) mt 3,060

1
UCON 50 HB 5100 (Union Carbide) or equivalent
2
Technical grade of oleyl alcohol such as Adol 80 (Ashland Chemical) or equivalent
3
Annual consumption based on 10% yearly loss of the initial charge.
4
Sud-Chemie type Actisorb 300

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page 2.6 - 2

C. INITIAL CHARGE OF CATALYST, RESINS AND CHEMICALS (ESTIMATED)

Catalyst/Chemical Units Quantity

SynDox Ethylene Oxide Reactor Catalyst m3
473
4
Sulfur Guard Bed Catalyst m3
27.3
PTR-1 m3
22.1
Amberlyst A-15 m3
17.2
Amberlyst A-21 m3
27.3
ARR-1 m3
36.6
Potassium Carbonate (100%) kg 221,200
Boric Acid (100%) kg 18,200
Vanadium Pentoxide (100%) kg 36,400

1
UCON 50 HB 5100 (Union Carbide) or equivalent
2
Technical grade of oleyl alcohol such as Adol 80 (Ashland Chemical) or equivalent
3
Annual consumption based on 10% yearly loss of the initial charge.
4
Sud-Chemie type Actisorb 300

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133

2.7

PLANT WASTES

INDEX
Page

A. BY-PRODUCTS 2.7 - 1

B. GASEOUS WASTE STREAMS 2.7 - 2

C. LIQUID WASTE STREAMS 2.7 - 3

D. CYCLE WATER TREATING UNIT

REGENERATION CYCLE EFFLUENTS 2.7 – 4

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page 2.7 - 1

2.7

PLANT WASTES

A. BY-PRODUCTS

Case 1

Rate Temp Specific Viscosity HHV

Stream (kg/h) Frequency (oC) Gravity (cP) (kJ/kg) Analysis Destination
Heavy 137 Continuous 150 1.029 1.48 23,450 0.5 wt % MEG OSBL
Glycol (Max) 40.1 wt % DEG
(HEG) 50 1.104 12.04 29.7 wt % TEG
(Min) 29.7 wt % PEG

Case 2

Rate Temp Specific Viscosity HHV

Stream (kg/h) Frequency (oC) Gravity (cP) (kJ/kg) Analysis Destination
Heavy 270 Continuous 150 1.03 1.48 23,450 0.5 wt % MEG OSBL
Glycol (Max) 36.7 wt % DEG
(HEG) 50 1.10 12.06 31.3 wt % TEG
(Min) 31.3 wt % PEG

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page 2.7 - 2

B. GASEOUS WASTE STREAMS

Case 1 and Case 2

Stream Rate (kg/h) Frequency Temp Mol. Analysis Destination

(°C) Wt
Reaction 470 (SOR) Continuous 45 23.85 28.78 vol% Ethylene Incinerator,
System Cycle 600 (EOR) Continuous 0.86 vol% Ethane (OSBL)
Gas Purge 2,660 (Max) 1 Intermittent 6.10 vol% Oxygen
50.19 vol% Methane
14.07 vol% inerts
Regenerator 14,970 (SOR) Continuous 60 38.89 80.29 vol% CO2 Atmosphere/
Condenser 24,600 (EOR) 19.69 vol% Water CO2
Vapor 0.02 vol% Ethylene Recovery
40 ppm EO (OSBL)
Waste Water 2,650 (Case 1) Continuous 133 18.13 Steam with 0.42 Incinerator,
VOC Stripper 2,640 (Case 2) vol% Acetaldehydes (OSBL)
Overhead
Purge
Third Effect 500 (Case 1) Continuous 190 18.02 Steam with 70 ppm Incinerator,
Reboiler Vent 500 (Case 2) Acetaldehydes (OSBL)

Fourth Effect 500 (Case 1) Continuous 180 18.02 Steam with 12 ppm Incinerator,
Reboiler Vent 500 (Case 2) Acetaldehydes (OSBL)

Fifth Effect 500 (Case 1) Continuous 169 18.02 Steam with 9 ppm Incinerator,
Reboiler Vent 500 (Case 2) Acetaldehydes (OSBL)

Sixth Effect 500 (Case 1) Continuous 158 18.02 Steam with 8 ppm Incinerator,
Reboiler Vent 500 (Case 2) Acetaldehydes (OSBL)

Evaporator NNF NNF 45 27.20 Air and nitrogen Incinerator,

Hotwell Vent saturated with water (OSBL)

Drying 370 Continuous 45 27.20 Air and nitrogen Atmosphere

Column saturated with water
Hotwell Vent
DEG/TEG 490 Continuous 45 27.20 Air and nitrogen Atmosphere
Columns saturated with water
Hotwell Vent

1
During initial start-up for switch-over from nitrogen to methane ballast gas, the flow would be maintained at the maximum rate for
about 48 hours. The methane concentration will vary from the initial value of 0 vol% to 53 vol% and the nitrogen concentration will
decrease from about 58 vol% to zero.
Confidential Information of Scientific Design Company, Inc.
 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page 2.7 - 3

C. LIQUID WASTE STREAMS

Destination
Aqueous Rate Temp. Sp. Analysis TOC
Stream (kg/h) Frequency (oC) Gr. pH1 (Nor) (mg/l)
Reclaim 1,990 Continuous 45 0.99 5 Water with 18 Waste Water
Condenser (Case 1) containing trace Sump
KO Drum 1,280 amounts of
Condensate (Case 2) glycols and
aldehydes
Drying 14,520 Continuous 45 0.99 6-7 Water containing 150 Waste Water
Column (Case 1) 79 ppm (1000 wt (NOR) Sump
Hotwell 15,390 ppm maximum) 390
Purge (Case 2) glycols (MAX)
Waste Water 10,910 Continuous 45 0.99 6-7 Water containing 220 Waste Water
VOC (Case 1) 0.04 wt% glycols Sump
Stripper 11,670
Purge (Case 2)
Cycle Water 23,650 2 Intermittent 60 0.98 6-11.5 Water containing 890 Neutralization
Treating 48,000 2 1.0 wt% (1.2% Sump
Unit (MAX) max) sodium salts,
Regeneration and traces of
Liquid glycols and
aldehydes
DEG/TEG 5 Continuous 45 1.1 6-7 Glycol Waste - Ethylene
Column (MAX) Glycol Sump
Hotwell
Purge
Blowdown 2,190 Continuous 45 0.99 8 Water with boiler 0 Waste Water
from (Case 1) feed water Sump
Blowdown 2,580 additives
Cooler (Case 2)
Total 3 53,270 52 0.99 6.5-7.5 Water containing 450
(Case 1) 0.44 wt% (0.53 (Case 1)
54,570 wt% max) sodium 450
(Case 2) salts, and traces (Case 2)
of glycols and
aldehydes

1
Estimated value
2
Average rate
3
Total does not include DEG/TEG Hotwell Liquid Waste

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page 2.7 - 4

D. CYCLE WATER TREATING UNIT REGENERATION CYCLE EFFLUENTS

TABLE IA
Typical Regeneration Cycle for the Cation Bed

Step Elapsed Water Required Effluent

Step Time Time
Min. Min. m³/Cycle From m³/Cycle m³/h To
1. Displacement Water (Note 60 60 Process First Anion Bed
1) 309.2 Water 309.2 309.2
2. Backwash 30 90 Process Neutralization
86.2 Water 86.2 172.4 Sump
3. Settle 30 120 ---- --- ---- ---- ---
4. Regeneration 30 150 Process Neutralization
27.6 Water 34.5 69 Sump
5. Slow Rinse 30 180 Process Neutralization
34.6 Water 34.6 69.2 Sump
6. Fast Rinse 60 240 Process Neutralization
115.3 Water 115.3 115.3 Sump

Cycle Time: 48 hours

Time for Regeneration: 4 hours
Process Water Usage: 572.9 m³/Cycle, 11.94 m³/h average
Effluent to Waste Water Sump: 270.6 m³/Cycle, 5.64 m³/h average

TABLE IB
Typical Regeneration Cycle for the First Anion Bed

Step Elapsed Water Required Effluent

Step Time Time
Min. Min. m³/Cycle From m³/Cycle m³/h To
1. Displacement Water (Note 60 60 Cation Bed Aldehyde
1) 309.2 309.2 309.2
Removal Bed
2. Backwash 30 90 Process Neutralization
50.8 Water 50.8 101.5 Sump
3. Settle 30 120 ---- --- ---- ---- ---
4. Regeneration 30 150 Process Neutralization
39 Water 46.8 93.6 Sump
5. Slow Rinse 30 180 Process Neutralization
47 Water 47 93.9 Sump
6. Fast Rinse 60 240 156.5 Process Neutralization
Water 156.5 156.5 Sump

Cycle Time: 48
Time for Regeneration: 4 hours
Process Water Usage: 293.3 m³/Cycle, 6.11 m³/h average
Effluent to Waste Water Sump: 301.1 m³/Cycle, 6.27 m³/h average

Note: 1 The displacement water is run in series through the Cation Bed, First Anion Bed, and Aldehyde
Removal Bed and in parallel through the Second Anion Bed.

Confidential Information of Scientific Design Company, Inc.

 SCIENTIFIC DESIGN COMPANY, INC.
A SABIC – Clariant Partnership Company
SD Project No. 53133
Page 2.7 - 5
Rev.2 – 04/21/16

D. CYCLE WATER TREATING UNIT REGENERATION CYCLE EFFLUENTS (Continued)

TABLE IC
Typical Regeneration Cycle for Aldehyde Removal Bed

Step Elapsed Water Required Effluent

Step Time Time
Min. Min. m³/Cycle From m³/Cycle m³/h To
1. Displacement Water (Note 60 60 309.2 1st Anion To TK-6550
1) Bed 309.2 309.2
2. Backwash 30 90 39.2 Process Neutralization
Water 39.2 78.4 Sump
3. Settle 30 120 ---- --- ---- ---- ---
4. Regeneration 60 180 128.1 Process Neutralization
Water 141.7 141.7 Sump
5. Slow Rinse 30 210 73.7 Process Neutralization
Water 73.7 147.3 Sump
6. Fast Rinse 60 270 245 Process Neutralization
Water 245 245 Sump

Cycle Time: 48 hours

Time for Regeneration: 4.5 hours
Process Water Usage: 485.9 m³/Cycle, 10.12 m³/h average
Effluent to Waste Water Sump: 499.4 m³/Cycle, 10.40 m³/h average

TABLE ID
Typical Regeneration Cycle for Second Anion Bed

Step Elapsed Water Required Effluent

Step Time Time
Min. Min. m³/Cycle From m³/Cycle m³/h To
1. Displacement Water (Note 60 60 Process
15.5 Water To TK-6550
1) (R-2) 15.5 15.5
2. Backwash 30 90 5.7 Process Neutralization
Water 5.7 11.3 Sump
3. Settle 30 120 ---- --- ---- ---- ---
4. Regeneration 30 150 6.5 Process Neutralization
Water 7.8 15.5 Sump
5. Slow Rinse 30 180 7.8 Process Neutralization
Water 7.8 15.5 Sump
6. Fast Rinse 60 240 33.3 Process Neutralization
Water 33.3 33.3 Sump

Cycle Time: 48 hours

Time for Regeneration: 4 hours
Process Water Usage: 68.6 m³/Cycle, 1.43 m³/h Average
Effluent to Waste Water Sump: 54.4 m³/Cycle, 1.13 m³/h Average

Note: 1 The displacement water is run in series through the Cation Bed, First Anion Bed, and Aldehyde
Removal Bed and in parallel through the Second Anion Bed.

Confidential Information of Scientific Design Company, Inc.