V222TI

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

V222TI MARINE ENGINE

POWER RATING Production tolerance : ± 3%

MODEL CONDITIONS POWER rpm Base Engine

V222TIH HEAVY DUTY 720PS (530kW) 1,800

V222TIM MEDIUM DUTY 800PS (588kW) 2,100 D2842LB

V222TIL LIGHT DUTY 1000PS (736kW) 2,300

Note : 1) No reduction in rating for intake air temperature is up to 45 °C (318K) and


sea water temperature is up to 32 °C (305K) , relative humidity is up to 60 %
all data are based on operation to ISO 3046.

Heavy Duty Medium Duty Light Duty

 Heavy Duty : Operation hours are unlimited per year, at average load is up to 90 %, at full load is up to 80 %
Typical gearbox ratio: 2.5 ~ 6
(Fishing trawler, Tug boat, Pushing vessel, Cargo boat, Freighter, Ferry)
 Medium Duty : Operation hours are up to 3,000 per year, at average load is up to 70 %
At full load is (up to 30 % / 4hrs per 12 hour operation period)
Typical gearbox ratio: 2 ~ 3.5
(Fishing boat, Pilot boat, Escort boat, Passenger boat, Ferry, Cruising vessel)
 Light Duty : Operation hours are up to 1,000 per year, at average load is up to 50 %
At full load is (up to 20 % / 2hrs per 12 hour operation period)
Typical gearbox ratio: 1 ~ 2.5
(Light weight fishing boat, Yacht, Coastguard boat, Fast boat, Fire pump, Navy)

DOOSAN Infracore Printed in March 2020 PS-SBM0765-E1F


V222TI MARINE ENGINE

Engine Specification
Model Units V222TIH V222TIM V222TIL
4 cycle, V type, direct- injection, water cooled
Engine type
with wet turbo charger & inter-cooler
Rating output (B.H.P) PS(kW)/rpm 720(530)/1,800 800(588)/2,100 1000(736)/2,300
Displacement cc 21,927
Cylinder number - bore(φ) x stroke mm 12 - φ128 x 142
Valve clearance at cold In / Ex mm 0.25 / 0.35
Low idling rpm rpm 725 ± 25
No load max. rpm rpm below 2,070 below 2,415 below 2,645
Mean effective pressure kg/cm 2
16.4 15.6 17.9
Mean piston speed m/sec. 8.52 9.94 10.89
Compression ratio 15.5 : 1 15.5 : 1 15.5 : 1
Firing order 1 – 12 – 5 – 8 – 3 – 10 – 6 – 7 – 2 – 11 – 4 – 9
Governor type of injection pump Mechanical variable speed (R.Q.V)
g / PS.h 171 179 183
Fuel consumption
Lit / h 148 173 221
Injection timing (B.T.D.C) deg 20 °± 1° 20 °± 1° 20 °± 1°
Starting system Electric Starting by starter motor
Starter motor capacity V – kW 24 - 6.6
Alternator capacity V–A 24 - 80
Battery V – Ah 24 - 200
Cooling system Indirect sea water cooling with heat exchanger
Cooling water capacity Max. / Min. lit. 98 / 87
Fresh water pump type Centrifugal type, driven by belt
Sea water pump type Rubber impeller type driven by belt
Lubricating oil pan capacity lit. Max : 40, Min : 33 (Engine total : 43)
(Engine) pressure kg/cm 2
Full : 3.5, Idle : 1.2
Direction of revolution crankshaft Counter clockwise viewed from stern side
Engine Size ( L x W x H ) mm 1,653 x 1,222 x 1,199
Engine dry weight kg 1,750 1,750 1,830
psi = kg/cm2 x 14.22 lb= kg x 2.205 hp = PS x 0.98635
lb/ft. = N.m x 0.737 lb/PS.h = g/kW.h x 0.00162 U.S gal. = liter x 0.264
kW = 0.2388 kcal/s cfm = m3/min x 35.3

Head office
7-11, Hwasu-Dong, Dong-Gu, Incheon, Korea
TEL : 82-32-211-2246, 2248 FAX : 82-32-761-2759
Seoul Office
Doosan Infracore Co. Ltd.,
21st Floor, Doosan Tower, 18-12, Euljiro 6-ga, Jung-gu,
Seoul, Korea.
TEL : 82-2-3398-8521~8536 FAX : 82-2-3398-8509
Web site : www.doosaninfracore.com

※ Specifications are subject to change without prior notice.

DOOSAN Infracore Printed in March 2020 PS-SBM0765-E1F

You might also like