K To 5 - Go Math Scope and Sequence

Download as pdf or txt
Download as pdf or txt
You are on page 1of 18

NYC Go Math!

Grade K

GO Math! Scope and Sequence


This document contains a high-level scope and sequence for the GO Math! program
intended to give teachers an overview of where instructional time will be spent across
the year through use of GO Math!. It provides a suggested sequence of instruction
and assessments, including where NYCDOE Periodic Assessments can be used to
gauge students’ understanding of concepts and skills taught at benchmark moments
throughout the year. Based on the Common Core Standards, Go Math! is divided into
critical areas that offer a focused and coherent study of the key concepts and skills for
each grade.

For each critical area, you will see the following:

• Essential Ideas: The key topics of the unit; chapters and lessons are built around
achieving understanding and mastery of these topics.

• Standards: The standards listed show the main standards covered throughout the
Critical Area. Instruction is focused on achieving a thorough knowledge of these
standards.

• Mathematical Practices: While all practices are integrated into each Critical
Area, the practices listed are ones that receive particular emphasis.

• Essential Questions: The essential question for each chapter is listed, showing
the goal of each chapter.

• Assessment Opportunities: This listing highlights the assessments that ensure


teachers can gauge student success on mastering the standards covered in the
Critical Area.

Grade K: Suggested Sequence Suggested Amount of Time


for the GO Math! program (in days)
Critical Area 1: Number and Operations 84 days
Critical Area 2: Geometry and Positions 25 days
Critical Area 3: Measurement and Data 15 days

NYC34   New York City Implementation Guide


NYC Scope and Sequence

Critical Area 1: Number and Operations Chapters 1–8 Critical Area 2: Geometry and Positions Chapters 9–10
84 Days (Instructional Days: 68; Assessment Days: 16) 25 Days (Instructional Days: 21; Assessment Days: 4)
Focus or Main Know number names and the count sequence. Identify and describe shapes (squares, circles, triangles, rectangles,
CC Standards K.CC.1 Count to 100 by ones and by tens. hexagons, cubes, cones, cylinders, and spheres).
K.CC.2 Count forward beginning from a given number within the known sequence K.G.1 Describe objects in the environment using names of shapes, and describe
(instead of having to begin at 1). the relative positions of these objects using terms such as above, below,
K.CC.3 Write numbers from 0 to 20. Represent a number of objects with a written beside, in front of, behind, and next to.
numeral 0-20 (with 0 representing a count of no objects). K.G.2 Correctly name shapes regardless of their orientations or overall size.
Count to tell the number of objects. K.G.3 Identify shapes as two-dimensional (lying in a plane, “flat”) or three-
dimensional (“solid”).
K.CC.4 Understand the relationship between numbers and quantities; connect
counting to cardinality. Analyze, compare, create, and compose shapes.
K.CC.4a When counting objects, say the number names in the standard K.G.4 Analyze and compare two- and three-dimensional shapes, in different
order, pairing each object with one and only one number name and each sizes and orientations, using informal language to describe their similari-
number name with one and only one object. ties, differences, parts (e.g., number of sides and vertices/“corners”) and
K.CC.4b Understand that the last number name said tells the number other attributes (e.g., having sides of equal length).
of objects counted. The number of objects is the same regardless of their K.G.5 Model shapes in the world by building shapes from components (e.g.,
arrangement or the order in which they were counted. sticks and clay balls) and drawing shapes.
K.CC.4c Understand that each successive number name refers to a K.G.6 Compose simple shapes to form larger shapes.
quantity that is one larger.
K.CC.5 Count to answer “how many?” questions about as many as 20 things ar-
ranged in a line, a rectangular array, or a circle, or as many as 10 things in
a scattered configuration; given a number from 1–20, count out that many
objects.
Compare numbers.
K.CC.6 Identify whether the number of objects in one group is greater than, less
than, or equal to the number of objects in another group, e.g., by using
matching and counting strategies.
K.CC.7 Compare two numbers between 1 and 10 presented as written numerals.
Understand addition as putting together and adding to, and under-
stand subtraction as taking apart and taking from.
K.OA.1 Represent addition and subtraction with objects, fingers, mental images,
drawings, sounds (e.g., claps), acting out situations, verbal explanations,
expressions, or equations.
K.OA.2 Solve addition and subtraction word problems, and add and subtract
within 10, e.g., by using objects or drawings to represent the problem.
K.OA.3 Decompose numbers less than or equal to 10 into pairs in more than one
way, e.g., by using objects or drawings, and record each decomposition by
a drawing or equation (e.g., 5 = 2 + 3 and 5 = 4 + 1).
K.OA.4 For any number from 1 to 9, find the number that makes 10 when added
to the given number, e.g., by using objects or drawings, and record the
answer with a drawing or equation.
K.OA.5 Fluently add and subtract within 5.
Work with numbers 11–19 to gain foundations for place value.
K.NBT.1 Compose and decompose numbers from 11 to 19 into ten ones and some
further ones, e.g., by using objects or drawings, and record each composi-
tion or decomposition by a drawing or equation (e.g., 18 = 10 + 8);
understand that these numbers are composed of ten ones and one, two,
three, four, five, six, seven, eight, or nine ones.
Highlighted MP.5 Use appropriate tools strategically. MP.3 Construct viable arguments and critique the reasoning of others.
Mathematical MP.6 Attend to precision. MP.7 Look for and make use of structure.
Practices MP.8 Look for and express regularity in repeated reasoning.
Essential • How can you show, count, and write numbers 0 to 5? (Chapter 1) • How can you identify, name, and describe two-dimensional shapes? (Chapter 9)
Questions • How can building and comparing sets help you compare numbers? (Chapter 2) • How can identifying and describing shapes help you sort them? (Chapter 10)
• How can you show, count, and write numbers 6 to 9? (Chapter 3)
• How can you show and compare numbers to 10? (Chapter 4)
• How can you show addition? (Chapter 5)
• How can you show subtraction? (Chapter 6)
• How can you show, count, and write numbers 11 to 19? (Chapter 7)
• How can you show, count, and write numbers to 10 and beyond? (Chapter 8)
Assessment Show What You Know Show What You Know
Opportunities Mid-Chapter Checkpoint Mid-Chapter Checkpoint
Chapter Review/Test Chapter Review/Test
Chapter Test Chapter Test
Chapter Performance Task Chapter Performance Task
Critical Area Performance Task Critical Area Performance Task

New York City Implementation Guide   NYC35


NYC Go Math! Grade K

Critical Area 3: Measurement and Data Chapters 11–12


15 Days (Instructional Days: 11; Assessment Days: 4)
Focus or Main Describe and compare measurable attributes.
CC Standards K.MD.1 Describe measurable attributes of objects, such as length or weight. Describe
several measurable attributes of a single object.
K.MD.2 Directly compare two objects with a measurable attribute in common, to see
which object has “more of”/“less of” the attribute, and describe the differ-
ence.
Classify objects and count the number of objects in each category.
K.MD.3 Classify objects into given categories; count the numbers of objects in each
category and sort the categories by count.
Highlighted MP.1 Make sense of problems and persevere in solving them.
Mathematical MP.2 Reason abstractly and quantitatively.
Practices MP.4 Model with mathematics.
Essential • How can comparing objects help you measure them? (Chapter 11)
Questions • How does sorting help you display information? (Chapter 12)
Assessment Show What You Know
Opportunities Mid-Chapter Checkpoint
Chapter Review/Test
Chapter Test
Chapter Performance Task
Critical Area Performance Task

NYC36    New York City Implementation Guide


NYC Go Math! Grade 1

GO Math! Scope and Sequence


This document contains a high-level scope and sequence for the GO Math! program
intended to give teachers an overview of where instructional time will be spent across
the year through use of GO Math!. It provides a suggested sequence of instruction
and assessments, including where NYCDOE Periodic Assessments can be used to
gauge students’ understanding of concepts and skills taught at benchmark moments
throughout the year. Based on the Common Core Standards, Go Math! is divided into
critical areas that offer a focused and coherent study of the key concepts and skills for
each grade.

For each critical area, you will see the following:

• Essential Ideas: The key topics of the unit; chapters and lessons are built around
achieving understanding and mastery of these topics.

• Standards: The standards listed show the main standards covered throughout the
Critical Area. Instruction is focused on achieving a thorough knowledge of these
standards.

• Mathematical Practices: While all practices are integrated into each Critical
Area, the practices listed are ones that receive particular emphasis.

• Essential Questions: The essential question for each chapter is listed, showing
the goal of each chapter.

• Assessment Opportunities: This listing highlights the assessments that ensure


teachers can gauge student success on mastering the standards covered in the
Critical Area.

Grade 1: Suggested Sequence Suggested Amount of Time


for the GO Math! program (in days)
Critical Area 1: Operations and Algebraic Thinking 55 days
Critical Area 2: Number and Operations in Base Ten 30 days
Critical Area 3: Measurement and Data 20 days

Critical Area 4: Geometry 19 days

NYC32   New York City Implementation Guide


NYC Scope and Sequence

Critical Area 1: Operations and Algebraic Thinking Critical Area 2: Number and Operations in Base Ten
Chapters 1–5 Chapters 6–8
55 Days (Instructional Days: 45; Assessment Days: 10) 30 Days (Instructional Days: 24; Assessment Days: 6)
Focus or Main Represent and solve problems involving addition and subtraction. Add and subtract within 20.
CC Standards 1.OA.1 Use addition and subtraction within 20 to solve word problems involving 1.OA.6 Add and subtract within 20, demonstrating fluency for addition and sub-
situations of adding to, taking from, putting together, taking apart, and traction within 10. Use strategies such as counting on; making ten (e.g., 8
comparing, with unknowns in all positions, e.g., by using objects, draw- + 6 = 8 + 2 + 4 = 10 + 4 = 14); decomposing a number leading to a ten
ings, and equations with a symbol for the unknown number to represent (e.g., 13 – 4 = 13 – 3 – 1 = 10 – 1 = 9); using the relationship between
the problem. addition and subtraction (e.g., knowing that 8 + 4 = 12, one knows 12 –
1.OA.2 Solve word problems that call for addition of three whole numbers whose 8 = 4); and creating equivalent but easier or known sums (e.g., adding 6
sum is less than or equal to 20, e.g., by using objects, drawings, and + 7 by creating the known equivalent 6 + 6 + 1 = 12 + 1 = 13).
equations with a symbol for the unknown number to represent the prob- Extend the counting sequence.
lem.
1.NBT.1 Count to 120, starting at any number less than 120. In this range, read
Understand and apply properties of operations and the relationship and write numerals and represent a number of objects with a written
between addition and subtraction. numeral.
1.OA.3 Apply properties of operations as strategies to add and subtract. Understand place value.
1.OA.4 Understand subtraction as an unknown-addend problem
1.NBT.2 Understand that the two digits of a two-digit number represent amounts
Add and subtract within 20. of tens and ones. Understand the following as special cases:
1.OA.5 Relate counting to addition and subtraction (e.g., by counting on 2 to add 1.NBT.2a 10 can be thought of as a bundle of ten ones — called a
2). “ten.”
1.OA.6 Add and subtract within 20, demonstrating fluency for addition and sub- 1.NBT.2b The numbers from 11 to 19 are composed of a ten and one,
traction within 10. Use strategies such as counting on; making ten (e.g., 8 two, three, four, five, six, seven, eight, or nine ones.
+ 6 = 8 + 2 + 4 = 10 + 4 = 14); decomposing a number leading to a ten 1.NBT.2c The numbers 10, 20, 30, 40, 50, 60, 70, 80, 90 refer to one,
(e.g., 13 – 4 = 13 – 3 – 1 = 10 – 1 = 9); using the relationship between two, three, four, five, six, seven, eight, or nine tens (and 0 ones).
addition and subtraction (e.g., knowing that 8 + 4 = 12, one knows 12 – 1.NBT.3 Compare two two-digit numbers based on meanings of the tens and ones
8 = 4); and creating equivalent but easier or known sums (e.g., adding 6 digits, recording the results of comparisons with the symbols >, =, and <.
+ 7 by creating the known equivalent 6 + 6 + 1 = 12 + 1 = 13). Use place value understanding and properties of operations to add
Work with addition and subtraction equations. and subtract.
1.OA.8 Determine the unknown whole number in an addition or subtraction equa- 1.NBT.4 Add within 100, including adding a two-digit number and a one-digit
tion relating to three whole numbers. number, and adding a two-digit number and a multiple of 10, using con-
crete models or drawings and strategies based on place value, properties
of operations, and/or the relationship between addition and subtraction;
relate the strategy to a written method and explain the reasoning used.
Understand that in adding two-digit numbers, one adds tens and tens,
ones and ones; and sometimes it is necessary to compose a ten.
1.NBT.5 Given a two-digit number, mentally find 10 more or 10 less than the
number, without having to count; explain the reasoning used.
1.NBT.6 Subtract multiples of 10 in the range 10–90 from multiples of 10 in the
range 10–90 (positive or zero differences), using concrete models or draw-
ings and strategies based on place value, properties of operations, and/or
the relationship between addition and subtraction; relate the strategy to a
written method and explain the reasoning used.

Highlighted MP.2 Reason abstractly and quantitatively. MP.1 Make sense of problems and persevere in solving them.
Mathematical MP.4 Model with mathematics. MP.3 Construct viable arguments and critique the reasoning of others.
Practices MP.8 Look for and express regularity in repeated reasoning. MP.6 Attend to precision.
Essential • How can you model adding within 10? (Chapter 1) • How do you use place value to model, read, and write numbers to 120?
Questions • How can you subtract numbers from 10 or less? (Chapter 2) (Chapter 6)
• How do you solve addition problems? (Chapter 3) • How do you use place value to compare numbers? (Chapter 7)
• How do you solve subtraction problems? (Chapter 4) • How can you add and subtract two-digit numbers? (Chapter 8)
• How can relating addition and subtraction help you to learn and understand
facts within 20? (Chapter 5)
Assessment Show What You Know Show What You Know
Opportunities Mid-Chapter Checkpoint Mid-Chapter Checkpoint
Chapter Review/Test Chapter Review/Test
Chapter Test Chapter Test
Chapter Performance Task Chapter Performance Task
Critical Area Performance Task Critical Area Performance Task

New York City Implementation Guide   NYC33


NYC Go Math! Grade 1

Critical Area 3: Measurement and Data Chapters 9–10 Critical Area 4: Geometry Chapters 11–12
20 Days (Instructional Days: 16; Assessment Days: 4) 19 Days (Instructional Days: 15; Assessment Days: 4)
Focus or Main Measure lengths indirectly and by iterating length units. Reason with shapes and their attributes.
CC Standards 1.MD.1 Order three objects by length; compare the lengths of two objects indi- 1.G.1 Distinguish between defining attributes (e.g., triangles are closed and
rectly by using a third object. three-sided) versus non-defining attributes (e.g., color, orientation, overall
1.MD.2 Express the length of an object as a whole number of length units, by size); build and draw shapes to possess defining attributes.
laying multiple copies of a shorter object (the length unit) end to end; 1.G.2 Compose two-dimensional shapes (rectangles, squares, trapezoids,
understand that the length measurement of an object is the number of triangles, half-circles, and quarter-circles) or three-dimensional shapes
same-size length units that span it with no gaps or overlaps. Limit to (cubes, right rectangular prisms, right circular cones, and right circular
contexts where the object being measured is spanned by a whole number cylinders) to create a composite shape, and compose new shapes from the
of length units with no gaps or overlaps. composite shape.
Tell and write time. 1.G.3 Partition circles and rectangles into two and four equal shares, describe
the shares using the words halves, fourths, and quarters, and use the
1.MD.3 Tell and write time in hours and half-hours using analog and digital clocks.
phrases half of, fourth of, and quarter of. Describe the whole as two of, or
Represent and interpret data. four of the shares. Understand for these examples that decomposing into
1.MD.4 Organize, represent, and interpret data with up to three categories; ask more equal shares creates smaller shares.
and answer questions about the total number of data points, how many
in each category, and how many more or less are in one category than in
another.
Highlighted MP.2 Reason abstractly and quantitatively. MP.1 Make sense of problems and persevere in solving them.
Mathematical MP.3 Construct viable arguments and critique the reasoning of others. MP.4 Model with mathematics.
Practices MP.8 Look for and express regularity in repeated reasoning. MP.7 Look for and make use of structure.

Essential • How can you measure length and tell time? (Chapter 9) • How do you identify and describe three-dimensional shapes? (Chapter 11)
Questions • How can graphs and charts help you organize, represent, and interpret data? • How do you sort and describe two-dimensional shapes? (Chapter 12)
(Chapter 10)
Assessment Show What You Know Show What You Know
Opportunities Mid-Chapter Checkpoint Mid-Chapter Checkpoint
Chapter Review/Test Chapter Review/Test
Chapter Test Chapter Test
Chapter Performance Task Chapter Performance Task
Critical Area Performance Task Critical Area Performance Task

NYC34    New York City Implementation Guide


NYC Go Math! Grade 2

GO Math! Scope and Sequence


This document contains a high-level scope and sequence for the GO Math! program
intended to give teachers an overview of where instructional time will be spent across
the year through use of GO Math!. It provides a suggested sequence of instruction
and assessments, including where NYCDOE Periodic Assessments can be used to
gauge students’ understanding of concepts and skills taught at benchmark moments
throughout the year. Based on the Common Core Standards, Go Math! is divided into
critical areas that offer a focused and coherent study of the key concepts and skills for
each grade.

For each critical area, you will see the following:

• Essential Ideas: The key topics of the unit; chapters and lessons are built around
achieving understanding and mastery of these topics.

• Standards: The standards listed show the main standards covered throughout the
Critical Area. Instruction is focused on achieving a thorough knowledge of these
standards.

• Mathematical Practices: While all practices are integrated into each Critical
Area, the practices listed are ones that receive particular emphasis.

• Essential Questions: The essential question for each chapter is listed, showing
the goal of each chapter.

• Assessment Opportunities: This listing highlights the assessments that ensure


teachers can gauge student success on mastering the standards covered in the
Critical Area.

Grade 2: Suggested Sequence Suggested Amount of Time


for the GO Math! program (in days)
Critical Area 1: Number Sense and Place Value 25 days
Critical Area 2: Addition and Subtraction 52 days
Critical Area 3: Measurement and Data 41 days

Critical Area 4: Geometry and Fractions 12 days

NYC34   New York City Implementation Guide


NYC Scope and Sequence

Critical Area 1: Number Sense and Place Value Critical Area 2: Addition and Subtraction
Chapters 1–2 Chapters 3–6
25 Days (Instructional Days: 21; Assessment Days: 4) 52 Days (Instructional Days: 44; Assessment Days: 8)
Focus or Main Work with equal groups of objects to gain foundations for multiplica- Represent and solve problems involving addition and subtraction.
CC Standards tion. 2.OA.1 Use addition and subtraction within 100 to solve one- and two-step word
2.OA.3 Determine whether a group of objects (up to 20) has an odd or even problems involving situations of adding to, taking from, putting together,
number of members, e.g., by pairing objects or counting them by 2s; write taking apart, and comparing, with unknowns in all positions, e.g., by
an equation to express an even number as a sum of two equal addends. using drawings and equations with a symbol for the unknown number to
Understand place value. represent the problem.
2.NBT.1 Understand that the three digits of a three-digit number represent Add and subtract within 20.
amounts of hundreds, tens, and ones; e.g., 706 equals 7 hundreds, 0 tens, 2.OA.2 Fluently add and subtract within 20 using mental strategies. By end of
and 6 ones. Understand the following as special cases: Grade 2, know from memory all sums of two one-digit numbers.
2.NBT.1a 100 can be thought of as a bundle of ten tens — called a Work with equal groups of objects to gain foundations for multiplication.
“hundred.” 2.OA.4 Use addition to find the total number of objects arranged in rectangu-
2.NBT.1b The numbers 100, 200, 300, 400, 500, 600, 700, 800, 900 lar arrays with up to 5 rows and up to 5 columns; write an equation to
refer to one, two, three, four, five, six, seven, eight, or nine hundreds (and express the total as a sum of equal addends.
0 tens and 0 ones). Use place value understanding and properties of operations to add
2.NBT.2 Count within 1000; skip-count by 5s, 10s, and 100s. and subtract.
2.NBT.3 Read and write numbers to 1000 using base-ten numerals, number
names, and expanded form. 2.NBT.5 Fluently add and subtract within 100 using strategies based on place
2.NBT.4 Compare two three-digit numbers based on meanings of the hundreds, value, properties of operations, and/or the relationship between addition
tens, and ones digits, using >, =, and < symbols to record the results of and subtraction.
comparisons. 2.NBT.6 Add up to four two-digit numbers using strategies based on place value
and properties of operations.
Use place value understanding and properties of operations to add 2.NBT.7 Add and subtract within 1000, using concrete models or drawings and
and subtract. strategies based on place value, properties of operations, and/or the rela-
2.NBT.8 Mentally add 10 or 100 to a given number 100–900, and mentally sub- tionship between addition and subtraction; relate the strategy to a written
tract 10 or 100 from a given number 100–900. method. Understand that in adding or subtracting three-digit numbers,
one adds or subtracts hundreds and hundreds, tens and tens, ones and
ones; and sometimes it is necessary to compose or decompose tens or
hundreds.
2.NBT.9 Explain why addition and subtraction strategies work, using place value
and the properties of operations.

Highlighted MP.6 Attend to precision. MP.1 Make sense of problems and persevere in solving them.
Mathematical MP.7 Look for and make use of structure. MP.2 Reason abstractly and quantitatively.
Practices MP.8 Look for and express regularity in repeated reasoning. MP.4 Model with mathematics.
Essential • How do you use place value to find the values of numbers and describe num- • How can you use patterns and strategies to find sums and differences for basic
Questions bers in different ways? Chapter 1) facts? (Chapter 3)
• How can you use place value to model, write, and compare 3-digit numbers? • How do you use place value to add 2-digit numbers, and what are some differ-
(Chapter 2) ent ways to add 2-digit numbers? (Chapter 4)
• How do you use place value to subtract 2-digit numbers with and without
regrouping? (Chapter 5)
• What are some strategies for adding and subtracting 3-digit numbers? (Chapter
6)

Assessment Show What You Know Show What You Know


Opportunities Mid-Chapter Checkpoint Mid-Chapter Checkpoint
Chapter Review/Test Chapter Review/Test
Chapter Test Chapter Test
Chapter Performance Task Chapter Performance Task
Critical Area Performance Task Critical Area Performance Task

New York City Implementation Guide   NYC35


NYC Go Math! Grade 2

Critical Area 3: Measurement and Data Chapters 7–10 Critical Area 4: Geometry and Fractions Chapters 11
41 Days (Instructional Days: 33; Assessment Days: 8) 12 Days (Instructional Days: 10; Assessment Days: 2)
Focus or Main Measure and estimate lengths in standard units. Reason with shapes and their attributes.
CC Standards 2.MD.1 Measure the length of an object by selecting and using appropriate tools 2.G.1 Recognize and draw shapes having specified attributes, such as a given
such as rulers, yardsticks, meter sticks, and measuring tapes. number of angles or a given number of equal faces. Identify triangles,
2.MD.2 Measure the length of an object twice, using length units of different quadrilaterals, pentagons, hexagons, and cubes.
lengths for the two measurements; describe how the two measurements 2.G.2 Partition a rectangle into rows and columns of same-size squares and
relate to the size of the unit chosen. count to find the total number of them.
2.MD.3 Estimate lengths using units of inches, feet, centimeters, and meters. 2.G.3 Partition circles and rectangles into two, three, or four equal shares,
2.MD.4 Measure to determine how much longer one object is than another, describe the shares using the words halves, thirds, half of, a third of, etc.,
expressing the length difference in terms of a standard length unit. and describe the whole as two halves, three thirds, four fourths. Recognize
Relate addition and subtraction to length. that equal shares of identical wholes need not have the same shape.
2.MD.5 Use addition and subtraction within 100 to solve word problems involving
lengths that are given in the same units, e.g., by using drawings (such as
drawings of rulers) and equations with a symbol for the unknown number
to represent the problem.
2.MD.6 Represent whole numbers as lengths from 0 on a number line diagram
with equally spaced points corresponding to the numbers 0, 1, 2, ..., and
represent whole-number sums and differences within 100 on a number
line diagram.
Work with time and money.
2.MD.7 Tell and write time from analog and digital clocks to the nearest five
minutes, using a.m. and p.m.
2.MD.8 Solve word problems involving dollar bills, quarters, dimes, nickels, and
pennies, using $ and ¢ symbols appropriately.
Represent and interpret data.
2.MD.9 Generate measurement data by measuring lengths of several objects to
the nearest whole unit, or by making repeated measurements of the same
object. Show the measurements by making a line plot, where the horizon-
tal scale is marked off in whole-number units.
2.MD.10 Draw a picture graph and a bar graph (with single-unit scale) to represent
a data set with up to four categories. Solve simple put together, take-
apart, and compare problems using information presented in a bar graph.
Highlighted MP.3 Construct viable arguments and critique the reasoning of others. MP.1 Make sense of problems and persevere in solving them.
Mathematical MP.6 Attend to precision. MP.3 Construct viable arguments and critique the reasoning of others.
Practices MP.8 Look for and express regularity in repeated reasoning. MP.6 Attend to precision.
Essential • How do you use the values of coins and bills to find the total value of a group • What are some two-dimensional shapes and three-dimensional shapes, and
Questions of money, and how do you read times shown on analog and digital clocks? how can you show equal parts of shapes? (Chapter 11)
(Chapter 7)
• What are some of the methods and tools that can be used to estimate and
measure length? (Chapter 8)
• What are some of the methods and tools that can be used to estimate and
measure length in metric units? (Chapter 9)
• How do tally charts, picture graphs, and bar graphs help you solve problems?
(Chapter 10)
Assessment Show What You Know Show What You Know
Opportunities Mid-Chapter Checkpoint Mid-Chapter Checkpoint
Chapter Review/Test Chapter Review/Test
Chapter Test Chapter Test
Chapter Performance Task Chapter Performance Task
Critical Area Performance Task Critical Area Performance Task

NYC36    New York City Implementation Guide


NYC Go Math! Grade 3

GO Math! Scope and Sequence


This document contains a high-level scope and sequence for the GO Math! program
intended to give teachers an overview of where instructional time will be spent across
the year through use of GO Math!. It provides a suggested sequence of instruction
and assessments, including where NYCDOE Periodic Assessments can be used to
gauge students’ understanding of concepts and skills taught at benchmark moments
throughout the year. Based on the Common Core Standards, Go Math! is divided into
critical areas that offer a focused and coherent study of the key concepts and skills for
each grade.

For each critical area, you will see the following:

• Essential Ideas: The key topics of the unit; chapters and lessons are built around
achieving understanding and mastery of these topics.

• Standards: The standards listed show the main standards covered throughout the
Critical Area. Instruction is focused on achieving a thorough knowledge of these
standards.

• Mathematical Practices: While all practices are integrated into each Critical
Area, the practices listed are ones that receive particular emphasis.

• Essential Questions: The essential question for each chapter is listed, showing
the goal of each chapter.

• Assessment Opportunities: This listing highlights the assessments that ensure


teachers can gauge student success on mastering the standards covered in the
Critical Area.

Grade 3: Suggested Sequence Suggested Amount of Time


for the GO Math! program (in days)
Critical Area 1: Whole Number Operations 75 days
NYCDOE Fall Benchmark Assessment
Critical Area 2: Understanding Fractions 20 days
Critical Area 3: Measurement 23 days

NYCDOE Spring Benchmark Assessment

Critical Area 4: Geometry 11 days

State Examination1

1
The GO Math! program is paced to ensure that all pre-test and post-test standards are completely
and fully covered prior to testing. As the transition to the PARCC assessments progresses, schools
may choose to make decisions around the pacing of units that address post-test concepts prior to
the state examination in consideration of the state’s testing program guidance
(see http://www.p12.nysed.gov/assessment/math/math-ei.html).

NYC34   Planning Guide


NYC Scope and Sequence

Critical Area 1: Whole Number Operations Chapters 1–7 Critical Area 2: Understanding Fractions
75 Days (Instructional Days: 61; Assessment Days: 14) Chapters 8–9
20 Days (Instructional Days: 16; Assessment Days: 4)
Focus or Main Represent and solve problems involving multiplication and division. Develop understanding of fractions as numbers.
CC Standards 3.OA.1 Interpret products of whole numbers, e.g., interpret 5 × 7 as the total number of objects 3.NF.1 Understand a fraction 1/b as the quantity formed by 1 part
in 5 groups of 7 objects each. when a whole is partitioned into b equal parts; understand
3.OA.2 Interpret whole-number quotients of whole numbers, e.g., interpret 56 ÷ 8 as the num- a fraction a/b as the quantity formed by a parts of size 1/b.
ber of objects in each share when 56 objects are partitioned equally into 8 shares, or as a 3.NF.2 Understand a fraction as a number on the number line;
number of shares when 56 objects are partitioned into equal shares of 8 objects each. represent fractions on a number line diagram.
3.OA.3 Use multiplication and division within 100 to solve word problems in situations involving 3.NF.2a Represent a fraction 1/b on a number line
equal groups, arrays, and measurement quantities, e.g., by using drawings and equations diagram by defining the interval from 0 to 1 as the whole
with a symbol for the unknown number to represent the problem. and partitioning it into b equal parts. Recognize that each
3.OA.4 Determine the unknown whole number in a multiplication or division equation relating part has size 1/b and that the endpoint of the part based at
three whole numbers. 0 locates the number 1/b on the number line.
Understand properties of multiplication and the relationship between multiplica- 3.NF.2b Represent a fraction a/b on a number line
tion and division. diagram by marking off a lengths 1/b from 0. Recognize
that the resulting interval has size a/b and that its endpoint
3.OA.5 Apply properties of operations as strategies to multiply and divide.
locates the number a/b on the number line.
3.OA.6 Understand division as an unknown-factor problem.
3.NF.3 Explain equivalence of fractions in special cases, and com-
Multiply and divide within 100. pare fractions by reasoning about their size.
3.OA.7 Fluently multiply and divide within 100, using strategies such as the relationship between 3.NF.3a Understand two fractions as equivalent (equal) if
multiplication and division (e.g., knowing that 8 × 5 = 40, one knows 40 ÷ 5 = 8) or they are the same size, or the same point on a number line.
properties of operations. By the end of Grade 3, know from memory all products of two 3.NF.3b Recognize and generate simple equivalent frac-
one-digit numbers. tions, e.g., 1/2 = 2/4, 4/6 = 2/3). Explain why the fractions
Solve problems involving the four operations, and identify and explain patterns are equivalent, e.g., by using a visual fraction model.
in arithmetic. 3.NF.3c Express whole numbers as fractions, and recog-
nize fractions that are equivalent to whole numbers.
3.OA.8 Solve two-step word problems using the four operations. Represent these problems using 3.NF.3d Compare two fractions with the same numera-
equations with a letter standing for the unknown quantity. Assess the reasonableness of tor or the same denominator by reasoning about their size.
answers using mental computation and estimation strategies including rounding. Recognize that comparisons are valid only when the two
3.OA.9 Identify arithmetic patterns (including patterns in the addition table or multiplication fractions refer to the same whole. Record the results of
table), and explain them using properties of operations. comparisons with the symbols >, =, or <, and justify the
Represent and interpret data. conclusions, e.g., by using a visual fraction model.
3.MD.3 Draw a scaled picture graph and a scaled bar graph to represent a data set with several Reason with shapes and their attributes.
categories. Solve one- and two-step “how many more” and “how many less” problems 3.G.2 Partition shapes into parts with equal areas. Express the
using information presented in scaled bar graphs. area of each part as a unit fraction of the whole.
3.MD.4 Generate measurement data by measuring lengths using rulers marked with halves and
fourths of an inch. Show the data by making a line plot, where the horizontal scale is
marked off in appropriate units— whole numbers, halves, or quarters.
Geometric measurement: understand concepts of area and relate area to multi-
plication and to addition.
3.MD.7 Relate area to the operations of multiplication and addition.
3.MD.7c Use tiling to show in a concrete case that the area of a rectangle with whole-
number side lengths a and b + c is the sum of a × b and a × c. Use area models to
represent the distributive property in mathematical reasoning.
Also 3.NBT.1, 3.NBT.2, 3.NBT.3
Highlighted MP.2 Reason abstractly and quantitatively. MP.1 Make sense of problems and persevere in solving them.
Mathematical MP.4 Model with mathematics. MP.3 Construct viable arguments and critique the reasoning of
Practices MP.7 Look for and make use of structure. others.
MP.4 Model with mathematics.
Essential • How can you add and subtract whole numbers and decide if an answer is reasonable? (Chap- • How can you use fractions to describe how much or how many?
Questions ter 1) (Chapter 8)
• How can you represent and interpret data? (Chapter 2) • How can you compare fractions? (Chapter 9)
• How can you use multiplication to find how many in all? (Chapter 3)
• What strategies can you use to multiply? (Chapter 4)
• How can you use multiplication facts, place value, and properties to solve multiplication
problems? (Chapter 5)
• How can you use division to find how many in each group or how many equal groups? (Chap-
ter 6)
• What strategies can you use to divide? (Chapter 7)
Assessment Show What You Know Show What You Know
Opportunities Mid-Chapter Checkpoint Mid-Chapter Checkpoint
Chapter Review/Test Chapter Review/Test
Chapter Test Chapter Test
Chapter Performance Task Chapter Performance Task
Critical Area Performance Task Critical Area Performance Task
NYCDOE Fall Benchmark Assessment

NYC Scope and Sequence   NYC35


NYC Go Math Grade 3

Critical Area 3: Measurement Chapters 10–11 Critical Area 4: Geometry Chapters 12


23 Days (Instructional Days: 19; Assessment Days: 4) 11 Days (Instructional Days: 9; Assessment Days: 2)
Focus or Main Understand properties of multiplication and the relationship between multiplication Develop understanding of fractions as numbers.
CC Standards and division. 3.NF.1 Understand a fraction 1/b as the quantity formed by 1 part
3.OA.5 Apply properties of operations as strategies to multiply and divide. when a whole is partitioned into b equal parts; understand a
Multiply and divide within 100. fraction a/b as the quantity formed by a parts of size 1/b.
3.NF.3 Explain equivalence of fractions in special cases, and compare
3.OA.7 Fluently multiply and divide within 100, using strategies such as the relationship between mul-
fractions by reasoning about their size.
tiplication and division (e.g., knowing that 8 × 5 = 40, one knows 40 ÷ 5 = 8) or properties of
3.NF.3d Compare two fractions with the same numerator or
operations. By the end of Grade 3, know from memory all products of two one-digit numbers.
the same denominator by reasoning about their size. Recognize
Solve problems involving the four operations, and identify and explain patterns in that comparisons are valid only when the two fractions refer
arithmetic. to the same whole. Record the results of comparisons with the
3.OA.8 Solve two-step word problems using the four operations. Represent these problems using equa- symbols >, =, or <, and justify the conclusions, e.g., by using a
tions with a letter standing for the unknown quantity. Assess the reasonableness of answers visual fraction model.
using mental computation and estimation strategies including rounding. Geometric measurement: understand concepts of area and
3.OA.9 Identify arithmetic patterns (including patterns in the addition table or multiplication table), and relate area to multiplication and to addition.
explain them using properties of operations.
3.MD.5 Recognize area as an attribute of plane figures and understand
Solve problems involving measurement and estimation of intervals of time, liquid concepts of area measurement.
volumes, and masses of objects.
Reason with shapes and their attributes.
3.MD.1 Tell and write time to the nearest minute and measure time intervals in minutes. Solve word
3.G.1 Understand that shapes in different categories (e.g., rhom-
problems involving addition and subtraction of time intervals in minutes, e.g., by representing
buses, rectangles, and others) may share attributes (e.g.,
the problem on a number line diagram.
having four sides), and that the shared attributes can define
3.MD.2 Measure and estimate liquid volumes and masses of objects using standard units of grams (g),
a larger category (e.g., quadrilaterals). Recognize rhombuses,
kilograms (kg), and liters (l).6 Add, subtract, multiply, or divide to solve one-step word problems
rectangles, and squares as examples of quadrilaterals, and
involving masses or volumes that are given in the same units, e.g., by using drawings (such as a
draw examples of quadrilaterals that do not belong to any of
beaker with a measurement scale) to represent the problem.
these subcategories.
Represent and interpret data. 3.G.2 Partition shapes into parts with equal areas. Express the area of
3.MD.4 Generate measurement data by measuring lengths using rulers marked with halves and fourths each part as a unit fraction of the whole.
of an inch. Show the data by making a line plot, where the horizontal scale is marked off in ap-
propriate units— whole numbers, halves, or quarters.
Geometric measurement: understand concepts of area and relate area to multiplica-
tion and to addition.
3.MD.5 Recognize area as an attribute of plane figures and understand concepts of area measurement.
3.MD.5a A square with side length 1 unit, called “a unit square,” is said to have “one square
unit” of area, and can be used to measure area.
3.MD.5b A plane figure which can be covered without gaps or overlaps by n unit squares is
said to have an area of n square units.
3.MD.6 Measure areas by counting unit squares (square cm, square m, square in, square ft, and impro-
vised units).
3.MD.7 Relate area to the operations of multiplication and addition.
3.MD.7a Find the area of a rectangle with whole-number side lengths by tiling it, and show
that the area is the same as would be found by multiplying the side lengths.
3.MD.7b Multiply side lengths to find areas of rectangles with whole number side lengths
in the context of solving real world and mathematical problems, and represent whole-number
products as rectangular areas in mathematical reasoning.
3.MD.7c Use tiling to show in a concrete case that the area of a rectangle with whole-number
side lengths a and b + c is the sum of a × b and a × c. Use area models to represent the dis-
tributive property in mathematical reasoning.
3.MD.7d Recognize area as additive. Find areas of rectilinear figures by decomposing them
into non-overlapping rectangles and adding the areas of the non-overlapping parts, applying this
technique to solve real world problems.
Also 3.NBT.2, 3.MD.8
Highlighted MP.1 Make sense of problems and persevere in solving them. MP.6 Attend to precision.
Mathematical MP.5 Use appropriate tools strategically. MP.7 Look for and make use of structure.
Practices MP.8 Look for and express regularity in repeated reasoning. MP.8 Look for and express regularity in repeated reasoning.
Essential • How can you tell time and use measurement to describe the size of something? (Chapter 10) • What are some ways to describe and classify two-dimensional
Questions • How can you solve problems involving perimeter and area? (Chapter 11) shapes? (Chapter 12)

Assessment Show What You Know Show What You Know


Opportunities Mid-Chapter Checkpoint Mid-Chapter Checkpoint
Chapter Review/Test Chapter Review/Test
Chapter Test Chapter Test
Chapter Performance Task Chapter Performance Task
Critical Area Performance Task Critical Area Performance Task
NYCDOE Spring Benchmark Assessment State Examination

NYC36    Planning Guide


NYC Go Math! Grade 4

GO Math! Scope and Sequence


This document contains a high-level scope and sequence for the GO Math! program
intended to give teachers an overview of where instructional time will be spent across
the year through use of GO Math!. It provides a suggested sequence of instruction
and assessments, including where NYCDOE Periodic Assessments can be used to
gauge students’ understanding of concepts and skills taught at benchmark moments
throughout the year. Based on the Common Core Standards, Go Math! is divided into
critical areas that offer a focused and coherent study of the key concepts and skills for
each grade.

For each critical area, you will see the following:

• Essential Ideas: The key topics of the unit; chapters and lessons are built around
achieving understanding and mastery of these topics.

• Standards: The standards listed show the main standards covered throughout the
Critical Area. Instruction is focused on achieving a thorough knowledge of these
standards.

• Mathematical Practices: While all practices are integrated into each Critical
Area, the practices listed are ones that receive particular emphasis.

• Essential Questions: The essential question for each chapter is listed, showing
the goal of each chapter.

• Assessment Opportunities: This listing highlights the assessments that ensure


teachers can gauge student success on mastering the standards covered in the
Critical Area.

Grade 4: Suggested Sequence Suggested Amount of Time


for the GO Math! program (in days)
Critical Area 1: P
 lace Value and Operations with
53 days
Whole Numbers
NYCDOE Fall Benchmark Assessment
Critical Area 2: Fractions and Decimals 38 days
Critical Area 3: Geometry, Measurement, and Data 36 days

NYCDOE Spring Benchmark Assessment

State Examination1

1
The GO Math! program is paced to ensure that all pre-test and post-test standards are completely
and fully covered prior to testing. As the transition to the PARCC assessments progresses, schools
may choose to make decisions around the pacing of units that address post-test concepts prior to
the state examination in consideration of the state’s testing program guidance
(see http://www.p12.nysed.gov/assessment/math/math-ei.html).

NYC34   Planning Guide


NYC Scope and Sequence

Critical Area 1: Place Value and Operations with Critical Area 2: Fractions and Decimals Chapters 6–9
Whole Numbers Chapters 1–5 38 Days (Instructional Days: 30; Assessment Days: 8)
53 Days (Instructional Days: 43; Assessment Days: 10)
Focus or Main Use the four operations with whole numbers to solve problems. Extend understanding of fraction equivalence and ordering.
CC Standards 4.OA.3 Solve multistep word problems posed with whole numbers and having 4.NF.1 Explain why a fraction a/b is equivalent to a fraction (n × a)/(n × b) by
whole-number answers using the four operations, including problems in using visual fraction models, with attention to how the number and size
which remainders must be interpreted. Represent these problems using of the parts differ even though the two fractions themselves are the same
equations with a letter standing for the unknown quantity. Assess the size. Use this principle to recognize and generate equivalent fractions.
reasonableness of answers using mental computation and estimation 4.NF.2 Compare two fractions with different numerators and different denomina-
strategies including rounding. tors, e.g., by creating common denominators or numerators, or by compar-
Generalize place value understanding for multi-digit whole numbers. ing to a benchmark fraction such as ½. Recognize that comparisons are
valid only when the two fractions refer to the same whole. Record the
4.NBT.1 Recognize that in a multi-digit whole number, a digit in one place repre-
results of comparisons with symbols >, =, or <, and justify the conclu-
sents ten times what it represents in the place to its right.
sions, e.g., by using a visual fraction model.
4.NBT.2 Read and write multi-digit whole numbers using base-ten numerals,
number names, and expanded form. Compare two multi-digit numbers Build fractions from unit fractions by applying and extending previ-
based on meanings of the digits in each place, using >, =, and < symbols ous understandings of operations on whole numbers.
to record the results of comparisons. 4.NF.4 Apply and extend previous understandings of multiplication to multiply a
4.NBT.3 Use place value understanding to round multi-digit whole numbers to any fraction by a whole number.
place. 4.NF.4.a. Understand a fraction a/b as a multiple of 1/b.
Use place value understanding and properties of operations to per- 4.NF.4.b. Understand a multiple of a/b as a multiple of 1/b, and use this
form multi-digit arithmetic. understanding to multiply a fraction by a whole number.
4.NF.4.c. Solve word problems involving multiplication of a fraction by
4.NBT.5 Multiply a whole number of up to four digits by a one-digit whole number,
a whole number, e.g., by using visual fraction models and equations to
and multiply two two-digit numbers, using strategies based on place value
represent the problem.
and the properties of operations. Illustrate and explain the calculation by
using equations, rectangular arrays, and/or area models.
Also 4.NF.3, 4.NF.5, 4.NF.6, 4.NF.7, 4.MD.2
4.NBT.6 Find whole-number quotients and remainders with up to four-digit
dividends and one-digit divisors, using strategies based on place value,
the properties of operations, and/or the relationship between multiplica-
tion and division. Illustrate and explain the calculation by using equations,
rectangular arrays, and/or area models.

Also 4.OA.1, 4.OA.2, 4.OA.4, 4.OA.5, 4.N BT.4


Highlighted MP.4 Model with mathematics. MP.1 Make sense of problems and persevere in solving them.
Mathematical MP.5 Use appropriate tools strategically. MP.2 Reason abstractly and quantitatively.
Practices MP.7 Look for and make use of structure. MP.5 Use appropriate tools strategically.
Essential • How can you use place value to compare, add, subtract, and estimate with • What strategies can you use to compare fractions and write equivalent frac-
Questions whole numbers? (Chapter 1) tions? (Chapter 6)
• What strategies can you use to multiply by 1-digit numbers? (Chapter 2) • How do you add or subtract fractions that have the same denominator? (Chap-
• What strategies can you use to multiply by 2-digit numbers? (Chapter 3) ter 7)
• How can you divide by 1-digit numbers? (Chapter 4) • How do you multiply fractions by whole numbers? (Chapter 8)
• How can you find factors and multiples, and how can you generate and de- • How can you record decimal notation for fractions and compare decimal frac-
scribe number patterns? (Chapter 5) tions? (Chapter 9)
Assessment Show What You Know Show What You Know
Opportunities Mid-Chapter Checkpoint Mid-Chapter Checkpoint
Chapter Review/Test Chapter Review/Test
Chapter Test Chapter Test
Chapter Performance Task Chapter Performance Task
Critical Area Performance Task Critical Area Performance Task
NYCDOE Fall Benchmark Assessment

NYC Scope and Sequence   NYC35


NYC Go Math! Grade 4

Critical Area 3: Geometry, Measurement, and Data


Chapters 10–13
36 Days (Instructional Days: 28; Assessment Days: 8)
Focus or Main Draw and identify lines and angles, and classify shapes by properties
CC Standards of their lines and angles.
4.G.1 Draw points, lines, line segments, rays, angles (right, acute, obtuse), and
perpendicular and parallel lines. Identify these in two-dimensional figures.
4.G.2 Classify two-dimensional figures based on the presence or absence of
parallel or perpendicular lines, or the presence or absence of angles of a
specified size. Recognize right triangles as a category, and identify right
triangles.
4.G.3 Recognize a line of symmetry for a two-dimensional figure as a line across
the figure such that the figure can be folded along the line into matching
parts. Identify line-symmetric figures and draw lines of symmetry.

Also 4.OA.5, 4.MD.1, 4.MD.2, 4.MD.3, 4.MD.4, 4.MD.5, 4.MD.6, 4.MD.7


Highlighted MP.1 Make sense of problems and persevere in solving them.
Mathematical MP.2 Reason abstractly and quantitatively.
Practices MP.6 Attend to precision.
Essential • How can you draw and identify lines and angles, and how can you classify
Questions shapes? (Chapter 10)
• How can you measure angles and solve problems involving angle measures?
(Chapter 11)
• How can you use relative sizes of measurements to solve problems and to
generate measurement tables that show a relationship? (Chapter 12)
• How can you use formulas for perimeter and area to solve problems? (Chapter
13)
Assessment Show What You Know
Opportunities Mid-Chapter Checkpoint
Chapter Review/Test
Chapter Test
Chapter Performance Task
Critical Area Performance Task
NYCDOE Spring Benchmark Assessment
State Examination

NYC36    Planning Guide


NYC Go Math! Grade 5

GO Math! Scope and Sequence


This document contains a high-level scope and sequence for the GO Math! program
intended to give teachers an overview of where instructional time will be spent across
the year through use of GO Math!. It provides a suggested sequence of instruction
and assessments, including where NYCDOE Periodic Assessments can be used to
gauge students’ understanding of concepts and skills taught at benchmark moments
throughout the year. Based on the Common Core Standards, Go Math! is divided into
critical areas that offer a focused and coherent study of the key concepts and skills for
each grade.

For each critical area, you will see the following:

• Essential Ideas: The key topics of the unit; chapters and lessons are built around
achieving understanding and mastery of these topics.

• Standards: The standards listed show the main standards covered throughout the
Critical Area. Instruction is focused on achieving a thorough knowledge of these
standards.

• Mathematical Practices: While all practices are integrated into each Critical
Area, the practices listed are ones that receive particular emphasis.

• Essential Questions: The essential question for each chapter is listed, showing
the goal of each chapter.

• Assessment Opportunities: This listing highlights the assessments that ensure


teachers can gauge student success on mastering the standards covered in the
Critical Area.

Grade 5: Suggested Sequence Suggested Amount of Time


for the GO Math! program (in days)
Critical Area 1: F luency with Whole Numbers
59 days
and Decimals
NYCDOE Fall Benchmark Assessment
Critical Area 2: Operations with Fractions 31 days
Critical Area 3: Geometry and Measurement 32 days

NYCDOE Spring Benchmark Assessment

State Examination1

1
The GO Math! program is paced to ensure that all pre-test and post-test standards are completely
and fully covered prior to testing. As the transition to the PARCC assessments progresses, schools
may choose to make decisions around the pacing of units that address post-test concepts prior to
the state examination in consideration of the state’s testing program guidance
(see http://www.p12.nysed.gov/assessment/math/math-ei.html).

NYC34   Planning Guide


NYC Scope and Sequence

Critical Area 1: Fluency with Whole Numbers and Critical Area 2: Operations with Fractions
Decimals Chapters 1–5 Chapters 6–8
59 Days (Instructional Days: 49; Assessment Days: 10) 31 Days (Instructional Days: 25; Assessment Days: 6)
Focus or Main Write and interpret numerical expressions. Write and interpret numerical expressions.
CC Standards 5.OA.1 Use parentheses, brackets, or braces in numerical expressions, and evalu- 5.OA.2 Write simple expressions that record calculations with numbers, and
ate expressions with these symbols. interpret numerical expressions without evaluating them.
5.OA.2 Write simple expressions that record calculations with numbers, and Use equivalent fractions as a strategy to add and subtract fractions.
interpret numerical expressions without evaluating them.
5.NF.1 Add and subtract fractions with unlike denominators (including mixed
Understand the place value system. numbers) by replacing given fractions with equivalent fractions in such a
5.NBT.1 Recognize that in a multi-digit number, a digit in one place represents 10 way as to produce an equivalent sum or difference of fractions with like
times as much as it represents in the place to its right and 1/10 of what it denominators.
represents in the place to its left. 5.NF.2 Solve word problems involving addition and subtraction of fractions refer-
5.NBT.2 Explain patterns in the number of zeros of the product when multiplying ring to the same whole, including cases of unlike denominators, e.g., by
a number by powers of 10, and explain patterns in the placement of the using visual fraction models or equations to represent the problem. Use
decimal point when a decimal is multiplied or divided by a power of 10. benchmark fractions and number sense of fractions to estimate mentally
Use whole-number exponents to denote powers of 10. and assess the reasonableness of answers.
5.NBT.3 Read, write, and compare decimals to thousandths. Apply and extend previous understandings of multiplication and divi-
5.NBT.3a Read and write decimals to thousandths using base-ten numer- sion to multiply and divide fractions.
als, number names, and expanded form, e.g., 347.392 = 3 × 100 + 4 ×
10 + 7 × 1 + 3 × (1/10) + 9 × (1/100) + 2 × (1/1000). 5.NF.3 Interpret a fraction as division of the numerator by the denominator (a/b =
5.NBT.3b Compare two decimals to thousandths based on meanings of a ÷ b). Solve word problems involving division of whole numbers leading
the digits in each place, using >, =, and < symbols to record the results of to answers in the form of fractions or mixed numbers, e.g., by using visual
comparisons. fraction models or equations to represent the problem.
5.NBT.4 Use place value understanding to round decimals to any place. 5.NF.4 Apply and extend previous understandings of multiplication to multiply a
fraction or whole number by a fraction.
Perform operations with multi-digit whole numbers and with deci- 5.NF.4a Interpret the product (a/b) × q as a parts of a partition of q into
mals to hundredths. b equal parts; equivalently, as the result of a sequence of operations a × q
5.NBT.5 Fluently multiply multi-digit whole numbers using the standard algorithm. ÷ b.
5.NBT.6 Find whole-number quotients of whole numbers with up to four-digit 5.NF.4b Find the area of a rectangle with fractional side lengths by
dividends and two-digit divisors, using strategies based on place value, tiling it with unit squares of the appropriate unit fraction side lengths, and
the properties of operations, and/or the relationship between multiplica- show that the area is the same as would be found by multiplying the side
tion and division. Illustrate and explain the calculation by using equations, lengths. Multiply fractional side lengths to find areas of rectangles, and
rectangular arrays, and/or area models. represent fraction products as rectangular areas.
5.NBT.7 Add, subtract, multiply, and divide decimals to hundredths, using concrete 5.NF.5 Interpret multiplication as scaling (resizing), by:
models or drawings and strategies based on place value, properties of op- 5.NF.5a Comparing the size of a product to the size of one factor on
erations, and/or the relationship between addition and subtraction; relate the basis of the size of the other factor, without performing the indicated
the strategy to a written method and explain the reasoning used. multiplication.
Apply and extend previous understandings of multiplication and divi- 5.NF.5b Explaining why multiplying a given number by a fraction
sion to multiply and divide fractions. greater than 1 results in a product greater than the given number (recog-
nizing multiplication by whole numbers greater than 1 as a familiar case);
5.NF.3 Interpret a fraction as division of the numerator by the denominator (a/b =
explaining why multiplying a given number by a fraction less than 1 results
a ÷ b). Solve word problems involving division of whole numbers leading
in a product smaller than the given number; and relating the principle of
to answers in the form of fractions or mixed numbers, e.g., by using visual
fraction equivalence a/b = (n×a)/(n×b) to the effect of multiplying a/b by
fraction models or equations to represent the problem.
1.
5.NF.6 Solve real world problems involving multiplication of fractions and mixed
numbers, e.g., by using visual fraction models or equations to represent
the problem.
5.NF.7 Apply and extend previous understandings of division to divide unit frac-
tions by whole numbers and whole numbers by unit fractions.
5.NF.7a Interpret division of a unit fraction by a non-zero whole num-
ber, and compute such quotients.
5.NF.7b Interpret division of a whole number by a unit fraction, and
compute such quotients.
5.NF.7c Solve real world problems involving division of unit fractions
by non-zero whole numbers and division of whole numbers by unit frac-
tions, e.g., by using visual fraction models and equations to represent the
problem.
Highlighted MP.1 Make sense of problems and persevere in solving them. MP.3 Construct viable arguments and critique the reasoning of others.
Mathematical MP.6 Attend to precision. MP.6 Attend to precision.
Practices MP.8 Look for and express regularity in repeated reasoning. MP.7 Look for and make use of structure.
Essential • How can you use place value, multiplication, and expression to represent and • How can you add and subtract fractions with unlike denominators? (Chapter 6)
Questions solve problems? (Chapter 1) • How do you multiply fractions? (Chapter 7)
• How can you divide whole numbers? (Chapter 2) • What strategies can you use to solve division problems involving fractions?
• How can you add and subtract decimals? (Chapter 3) (Chapter 8)
• How can you solve decimal multiplication problems? (Chapter 4)
• How can you solve decimal division problems? (Chapter 5)
Assessment Show What You Know Show What You Know
Opportunities Mid-Chapter Checkpoint Mid-Chapter Checkpoint
Chapter Review/Test Chapter Review/Test
Chapter Test Chapter Test
Chapter Performance Task Chapter Performance Task
Critical Area Performance Task Critical Area Performance Task
NYCDOE Fall Benchmark Assessment

NYC Scope and Sequence   NYC35


NYC Go Math! Grade 5

Critical Area 3: Geometry and Measurement Chapters 9–11


32 Days (Instructional Days: 26; Assessment Days: 6)
Focus or Main Write and interpret numerical expressions.
CC Standards 5.OA.1 Use parentheses, brackets, or braces in numerical expressions, and evaluate expressions with these symbols.

Analyze patterns and relationships.


5.OA.3 Generate two numerical patterns using two given rules. Identify apparent relationships between corresponding terms. Form
ordered pairs consisting of corresponding terms from the two patterns, and graph the ordered pairs on a coordinate plane.
Understand the place value system.
5.NBT.1 Recognize that in a multi-digit number, a digit in one place represents 10 times as much as it represents in the place to its
right and 1/10 of what it represents in the place to its left.
Perform operations with multi-digit whole numbers and with decimals to hundredths.
5.NBT.5 Fluently multiply multi-digit whole numbers using the standard algorithm.
5.NBT.6 Find whole-number quotients of whole numbers with up to four-digit dividends and two-digit divisors, using strategies based
on place value, the properties of operations, and/or the relationship between multiplication and division. Illustrate and explain
the calculation by using equations, rectangular arrays, and/or area models.
Apply and extend previous understandings of multiplication and division to multiply and divide fractions.
5.NF.3 Interpret a fraction as division of the numerator by the denominator (a/b = a ÷ b). Solve word problems involving division of
whole numbers leading to answers in the form of fractions or mixed numbers, e.g., by using visual fraction models or equa-
tions to represent the problem.
5.NF.7 Apply and extend previous understandings of division to divide unit fractions by whole numbers and whole numbers by unit
fractions.
5.NF.7a Interpret division of a unit fraction by a non-zero whole number, and compute such quotients.
Convert like measurement units within a given measurement system.
5.MD.1 Convert among different-sized standard measurement units within a given measurement system (e.g., convert 5 cm to 0.05
m), and use these conversions in solving multi-step, real world problems.
Represent and interpret data.
5.MD.2 Make a line plot to display a data set of measurements in fractions of a unit (1/2, 1/4, 1/8). Use operations on fractions for
this grade to solve problems involving information presented in line plots.
Geometric measurement: understand concepts of volume and relate volume to multiplication and to addition.
5.MD.3 Recognize volume as an attribute of solid figures and understand concepts of volume measurement.
5.MD.3a A cube with side length 1 unit, called a “unit cube,” is said to have “one cubic unit” of volume, and can be used
to measure volume.
5.MD.3b A solid figure which can be packed without gaps or overlaps using n unit cubes is said to have a volume of n cubic
units.
5.MD.4 Measure volumes by counting unit cubes, using cubic cm, cubic in, cubic ft, and improvised units.
5.MD.5 Relate volume to the operations of multiplication and addition and solve real world and mathematical problems involving
volume.
5.MD.5a Find the volume of a right rectangular prism with whole-number side lengths by packing it with unit cubes, and
show that the volume is the same as would be found by multiplying the edge lengths, equivalently by multiplying the height
by the area of the base. Represent threefold whole-number products as volumes, e.g., to represent the associative property of
multiplication.
5.MD.5b Apply the formulas V = l × w × h and V = b × h for rectangular prisms to find volumes of right rectangular prisms
with whole number edge lengths in the context of solving real world and mathematical problems.
5.MD.5c Recognize volume as additive. Find volumes of solid figures composed of two non-overlapping right rectangular
prisms by adding the volumes of the non-overlapping parts, applying this technique to solve real world problems.
Graph points on the coordinate plane to solve real-world and mathematical problems.
5.G.1 Use a pair of perpendicular number lines, called axes, to define a coordinate system, with the intersection of the lines (the ori-
gin) arranged to coincide with the 0 on each line and a given point in the plane located by using an ordered pair of numbers,
called its coordinates. Understand that the first number indicates how far to travel from the origin in the direction of one axis,
and the second number indicates how far to travel in the direction of the second axis, with the convention that the names of
the two axes and the coordinates correspond (e.g., x-axis and x-coordinate, y-axis and y-coordinate).
Also 5.G.2, 5.G.3, 5.G.4
Highlighted MP.5 Use appropriate tools strategically.
Mathematical MP.6 Attend to precision.
Practices MP.7 Look for and make use of structure.
Essential • How can you use line plots, coordinate grids, and patterns to help you graph and interpret data? (Chapter 9)
Questions • What strategies can you use to compare and convert measurements? (Chapter 10)
• How do unit cubes help you build solid figures and understand the volume of a rectangular prism? (Chapter 11)
Assessment Show What You Know
Opportunities Mid-Chapter Checkpoint
Chapter Review/Test
Chapter Test
Chapter Performance Task
Critical Area Performance Task
NYCDOE Spring Benchmark Assessment
State Examination

NYC36    Planning Guide

You might also like