Network
Network
Each student has to submit their assignment as guided in the assignment brief. The students
are guided what sort of information is to produce to meet the criteria targeted. You are
required to make use of headings, paragraphs and subsections as appropriate, and all work
must be supported with research and referenced using the APA referencing system.
LO1: Explore LAN design principles and their application in the network design
process.
LO2: Implement a network using LAN design principles based on a predefined set of
requirements
LO3: Produce an appropriate WAN solution to a set of organizational requirements.
LO4: Solve a range of network related problems using appropriate troubleshooting
techniques and methods.
Scenario
Nepal Staffing Company (NSC) is one of the leading staffing company in Nepal. It has multiple
branches providing man power to different organization and companies in Nepal. The Central
office is located in Kathmandu and has branches in different part of the country as mentioned
below.
Branches:
1. Kathmandu 4. Pokhara
2. Birgunj 5. Nepalgunj
3. Chitwan
The Head office is located in Kathmandu. Currently there is no network between branches.
Now Management decided to interconnect all the branches with VPN over internet. Also need to
redesign LAN network of Head office where there is 3 PCs in each Admin, Management and
Finance department and one server that holds details of each staffs. You are hired as a Network
Administrator to redesign all the LAN and WAN to fulfill the requirement of NSC. Management
has given you detail to design LAN as follow.
Each branch has 3 PCs in each Admin, Management and finance department. The entire
PCs must connect through switch with LAN cable.
All departments must be in different network.
The server at head office must be isolated in different network. There must L3
redundancy for each branch.
Each branch must be connected via two routers to ISP. ISP must be running IPv6
addressing mode.
Head office’s each department must be connected with different switches. All switch of
head office must be connected with each-other.
Head office must connected to ISP’s two routers via two switches and routers.
All switches of head office must be in ring with ether-channel at all interfaces of switch
connected with each-other.
All hosts from all branches must be reachable with each-others.
Each branch should be able to access the servers located in head office.
You need to design layer 2 and layer 3 network based on LAN design principle including IPV4
and IPV6 IP address planning. You should simulate sample network design in simulation with
configuration
Assignment Task – Part 1
Prepare a report covering the following topics:
1. Examine and produce an analysis of the network design models and how they
contribute to the design of a scalable and reliable network.
2. A detailed discussion of LAN redundancy concepts, network features, such as
bandwidth and load and their related issues. The explanations should contain the
possible solutions provided at Layer 2 and 3 of the OSI Model.
3. Provide a detailed account of how redundancy protocols support scalable networks.
4. Design and implement a network prototype using a network simulator (or lab
devices), which incorporates redundancy at Layer 2 and 3 and link aggregation
features with the following requirements:
Include at least three Layer 2 switches.
Provide redundant link between all the switches.
Use Rapid PVST+ as spanning tree protocol.
Use link aggregation in the main active link.
Provide a redundant gateway using a suitable first-hop redundancy protocol.
You also need to provide the following written material as a formal report:
1. A rationale about the selection of the networking devices for the prototype.
2. A comparison between PVST and Rapid PVST and their effectiveness in solving
redundancy issues.
3. A detailed explanation of how the first-hop redundancy protocols will work for IPv4
and IPv6.
4. An evaluation of Ether Channel technology solving bandwidth and load issues.
Grades Achieved
Note: Refer the unit details provided in your handbook when responding all the tasks above.
Make sure that you have understood and developed your response that matches the highlighted
key words in each task.
Plagiarism Notice
You are remined that there exist Academic Misconduct Policy and Regulation concerning
Cheating and Plagiarism.
The center policy is that you must submit your work within due date to achieve “Merit”
and “Distinction”. Late submission automatically eliminates your chance of achieving
“Merit and Distinction”. Also, 80% attendance is required to validate this assignment.
I declare that all the work submitted for this assignment is my own work and I understand that if
any part of the work submitted for this assignment is found to be plagiarised, none of the work
submitted will be allowed to count towards the assessment of the assignment.