Scribd
Upload
41 views2 pages

Assignment

This document outlines a group assignment for a microprocessor technology course. Students are asked to: 1) Form groups to design an embedded system to address a current issue reported in a November 2022 newspaper. The system will use Keil software and an mbed board. 2) Submit a proposal by Week 9 describing the system's function, sensors, outputs and programming. 3) Complete the project, write a report and record a demonstration video by Week 14. The report should follow a technical paper format.

Uploaded by

Sarah Nabilah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
41 views2 pages

Assignment

This document outlines a group assignment for a microprocessor technology course. Students are asked to: 1) Form groups to design an embedded system to address a current issue reported in a November 2022 newspaper. The system will use Keil software and an mbed board. 2) Submit a proposal by Week 9 describing the system's function, sensors, outputs and programming. 3) Complete the project, write a report and record a demonstration video by Week 14. The report should follow a technical paper format.

Uploaded by

Sarah Nabilah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

BENC 2423 ASSIGNMENT – SEMESTER 1 2022/2023

BENC 2423 MICROPROCESSOR TECHNOLOGY


GROUP ASSIGNMENT (20%)
SEMESTER 1 2022/2023

Flip through the newspaper (any date in November 2022) and look for any current issues
presented in the newspaper. Discuss the issues with your group-mates and suggest a
solution that can help prevent the issues from recurring in the future. Your task is to design
and develop an embedded system to tackle the issues by using Keil Programming software
and the mbed LPC1768 board. In your report, explain the function of your system, specify
the sensor (analog inputs) and outputs, and explain the programming involved in your
system. Then, prepare a video presentation demonstrating the working of the system
prototype.

A) Assignment Planning

No. Task Timeline


1. Form a group for this assignment (minimum 4, maximum 5 members Week 5
per group) and choose a group name and project title.

2. Prepare a proposal for the project. Week 9

3. Complete the project (programming and demonstration), write the Week 10-
report and record a demonstration video of the project. 14

1
BENC 2423 ASSIGNMENT – SEMESTER 1 2022/2023

B) Proposal Format
The proposal should consist of but not limited to the following criteria:
1. Motivation
2. Overview of the project (block diagram of the proposed system, sensor (analog
input), output, description of the operation or function of the system).
3. Methodology (flowchart, how do you configure the I/O, how the data can be read
and write to the pins, etc. how the circuit will be connected to the mbed pins, at
which port of mbed, as digital input or analog input or etc.)
4. Features (expected output, which is the output port/pin, meaning of HIGH/LOW
signal on the output pin, etc.)
5. Project planning (task distribution among group members, timeline of project)
6. References

C) Report Format
The report should be written in a technical paper format, consisting of but not limited to the
following criteria:
1. Abstract
2. Introduction
3. Project Design / Block Diagram / Schematic Circuit
4. Project Coding / Program / Flowchart
5. Project Demonstration / Result
6. Conclusion
7. References

Go to the following links for:


1. Word template for the technical paper.
2. Sample technical paper for reference.

You might also like